2
ENEC13011 Steel Structures Tutorial 1 Revision of Structural Analysis Q1: Determine the force in each member of the truss using approximate method. Assume diagonals cannot support a compressive force. Q2: Determine the force in each member of the truss using approximate method. Assume diagonals can support either a tensile force or a compressive force.

ENEC13011 Tutorial 1

Embed Size (px)

Citation preview

  • ENEC13011 Steel Structures Tutorial 1

    Revision of Structural Analysis Q1:

    Determine the force in each member of the truss using approximate method. Assume diagonals cannot support a compressive force.

    Q2:

    Determine the force in each member of the truss using approximate method. Assume diagonals can support either a tensile force or a compressive force.

  • Q3:

    Determine (approximately) the internal moment at joints F and D of the frame.

    Q4:

    Determine (approximately) the internal moment at joints A,B and C of the frame.

    Q5:

    Define the following terms:

    Action (load) & Design action (load) Nominal capacity & Design capacity Capacity reduction factor Yield stress & ultimate stress Second moment of area Modulus of section (elastic & plastic)