MALVINSTOPENCAPSULATING COATING FOR ASBESTOS’S REMOVALCompliant with the directive 2004/42/CECompliant with UNI 10686 TIPO D

DESCRIPTION It is a primer suitable as a temporary encapsulating for the pretreatment of asbestos-cement sheets to remove according to UNI 10686 type D (stop in a non-definitive way the release of asbestos fibers from the sheets and allow the handling, the transportation and the disposal working safely).

COLORRed.

PACKAGINGLt 5 – 20 Plastic containersIBC container 1000 lt

FEATURES An accurate and selective choice of the main materials allows us to produce a high quality

product that adheres perfectly to the support. Produced in red to allow to see the surfaces treated, is the perfect solution for the temporary encapsulation.

COMPOSITION Based on copolymers in water dispersion, iron oxides, specific additives.

USESuitable as a temporary encapsulating for the pretreatment of asbestos-cement sheets to remove according to UNI 10686 type D.

PHYSICAL FEATURES

Specific Weight ± 5% UNI EN ISO 2811-1 1,05 Kg/lt Appearance Liquid fluid Min. Temperature for the film formation +5°CDry residue 50% ±2%Dilution 25 % con acquaDry residue bdilution 40% ±2% Limit value UE of the content of VOC (2010) ≤30 gr/ltContent of VOC ≤ 2 gr/ltClassification DIRECTIVE 2004/42/CE H/BA

YIELDCirca 4/5 mq/lt of product diluted, thickness of the film 40m, depending on the absorption of thesubstrate.

TOOLSBrush, roller and by spray

DRYING TIMEAbout 1 hour to the touch.

MALVIN

LOW EMISSION VOC

Protettivo incapsulamento cem. am

iant

o

Pro

dott

o Conforme alla Norma Europea

MALVIN

2004/42/CE

H/BA

The performance characteristics refer to laboratory tests, values depend on the weather conditions and on the method of implementation. The user must verify that the product is suitable for the intended application.

SEDE LEGALE E STABILIMENTO • Zona ASI - SS 7 Bis Km 15,400 - 81030 Gricignano di Aversa (CE)TEL. + 39 081 8132780 - 5029713 • FAX + 39 081 5029748 • commerciale@malvinsrl.com - www.malvinsrl.comNumero Verde

800 - 142 999

APPLICATIONThe operators involved in the removal of the asbestos must be properly protected as required by law.Dilute 1 part of product with 0,25 parts of clean water.Apply MALVINSTOP on both surfaces of asbestos.Remove being careful to the disassembly of all fastening systems to avoid damages to the sheets.Handle the sheets carefully to avoid possible damages with the consequent dispersion of fibers.Stacking and palletizing in order to allow easy moving.Treat again the pallet to be handled by repeating the spraying operation with MALVINSTOP.Seal and pack the pallet with a suitable plastic. Don’t apply on frozen substrates, with frost or possible frost in 24 hours. Don’t apply with driving rain.Shake well before using.Thickness of application 80-150 µm.We suggest to apply MALVINSTOP with a temperature between + 5 ° C and + 30 ° C.

SUMMARYThe temporary encapsulation for the pretreatment of asbestos-cement sheets to remove according to UNI 10686 type D (stop in a non-definitive way the release of asbestos fibers from the sheets and allow the handling, the transportation and the disposal working safely) will be realized with a primer based on copolymers in water dispersion, type “MALVINSTOP” by MALVIN S.r.l., applied diluted 1 part of product and 0,25 parts of water in a min. thickness of 80-150 µm with a brush or by spray, with a yield of 4/5 mq/lt of product diluted depending on the absorption of the substrate.

MALVINSTOP

•••••••••••••

CERTIFICATO N° EDIL 2016_003