• Home

  • Documents

  • metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection...
23

metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 2: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 3: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 4: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 5: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 6: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 7: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 8: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 9: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 10: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 11: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 12: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 13: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 14: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 15: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 16: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 17: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 18: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 19: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 20: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 21: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 22: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of
Page 23: metcenter.ruEN 1386:2007 (E) 1 Scope This document specifies the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of

IE2 High Efficiency CAST IRON Frame 71-355...IEC 60034-1, specifies allow tolerances for efficiency, power factor, speed, locked rotor torque, pullout torque, starting current and

IE2 High Efficiency CAST IRON Frame 71-355...IEC 60034-1, specifies allow tolerances for efficiency, power factor, speed, locked rotor torque, pullout torque, starting current and

Documents
Melendres # 1386 Arpaio Motion Re Vogel

Melendres # 1386 Arpaio Motion Re Vogel

Documents
Cylindrical Fits & Geometric Tolerances Tolerances Cylindrical Fits & Geometric Tolerances A Dimensioning Technique That Ensures the Interchangeability

Cylindrical Fits & Geometric Tolerances Tolerances Cylindrical Fits & Geometric Tolerances A Dimensioning Technique That Ensures the Interchangeability

Documents
Fluid power systems — O-rings · 2018-10-24 · This part of ISO 3601 specifies the inside diameters, cross-sections, tolerances and designation codes for O-rings used in fluid

Fluid power systems — O-rings · 2018-10-24 · This part of ISO 3601 specifies the inside diameters, cross-sections, tolerances and designation codes for O-rings used in fluid

Documents
Interview no. 1386

Interview no. 1386

Documents
Position Tolerances

Position Tolerances

Documents
Tolerances Commodity

Tolerances Commodity

Documents
Tolerances 01

Tolerances 01

Documents
1386 CALCULATING THE PARAMETERS OF FULL LIGHTNING …

1386 CALCULATING THE PARAMETERS OF FULL LIGHTNING …

Documents
ISO metric screw threadszb.guaihou.com/stdpool/BS 3643-1-2007 ISO metric screw... · 2008-05-01  · BS 3643-2 specifies the fundamental d eviations, tolerances and limits of size

ISO metric screw threadszb.guaihou.com/stdpool/BS 3643-1-2007 ISO metric screw... · 2008-05-01  · BS 3643-2 specifies the fundamental d eviations, tolerances and limits of size

Documents
Aluminium and aluminium alloys Foil - sigma-industry.com · This document specifies the tolerances on dimensions for single and double-rolled aluminium and aluminium alloy foil supplied

Aluminium and aluminium alloys Foil - sigma-industry.com · This document specifies the tolerances on dimensions for single and double-rolled aluminium and aluminium alloy foil supplied

Documents
Chapter 5 Product and Service Design Product Design Specifies materials Specifies materials Determines dimensions & tolerances Determines dimensions

Chapter 5 Product and Service Design Product Design Specifies materials Specifies materials Determines dimensions & tolerances Determines dimensions

Documents
GEOMETRICAL TOLERANCE DEFINITIONS - … tolerances Directional tolerances Flatness ... Location tolerances common datum straight line A-B. Runout tolerances Symmetry of a midplane

GEOMETRICAL TOLERANCE DEFINITIONS - … tolerances Directional tolerances Flatness ... Location tolerances common datum straight line A-B. Runout tolerances Symmetry of a midplane

Documents
4 Tolerances Systeme Iso Tolerances Ajustements

4 Tolerances Systeme Iso Tolerances Ajustements

Documents
Dimensional Tolerances

Dimensional Tolerances

Documents
Royal Caribbean 4pp DM June 2014 - 1386

Royal Caribbean 4pp DM June 2014 - 1386

Documents
Chapter 3 Products and Services. Product Design Specifies materials Determines dimensions & tolerances Defines appearance Sets performance standards

Chapter 3 Products and Services. Product Design Specifies materials Determines dimensions & tolerances Defines appearance Sets performance standards

Documents
TRANSPORTATION RESEARCH RECORD - …onlinepubs.trb.org/Onlinepubs/trr/1993/1386/1386.pdf · Sponsorship of Transportation Research Record 1386 ... Letoffe, Laboratoire de Thermochimie

TRANSPORTATION RESEARCH RECORD - …onlinepubs.trb.org/Onlinepubs/trr/1993/1386/1386.pdf · Sponsorship of Transportation Research Record 1386 ... Letoffe, Laboratoire de Thermochimie

Documents
Tolerances 02

Tolerances 02

Documents
Relating Tolerances and Kinematic Behavior · The AN.WB4.1 [l] standard specifies the clearance required to achieve a particular fit. A sample condition is, Close sliding fits are

Relating Tolerances and Kinematic Behavior · The AN.WB4.1 [l] standard specifies the clearance required to achieve a particular fit. A sample condition is, Close sliding fits are

Documents
Flender Tolerances

Flender Tolerances

Documents
General tolerances for Iinearand angular DIN dimensions ... · PDF fileGeneral tolerances for Iinearand angular dimensions and geometrical=.tolerances ... General tolerances for these

General tolerances for Iinearand angular DIN dimensions ... · PDF fileGeneral tolerances for Iinearand angular dimensions and geometrical=.tolerances ... General tolerances for these

Documents
Tolerances 1

Tolerances 1

Engineering
Form Tolerances

Form Tolerances

Documents
locational tolerances

locational tolerances

Documents
Global Tolerances

Global Tolerances

Documents
IMG 1386 - Cégep de Sherbrooke

IMG 1386 - Cégep de Sherbrooke

Documents
Cranes — Tolerances for wheels and travel ... - iso-iran.iriso-iran.ir/standards/iso/ISO_12488_1_2012_,_Cranes_,_Tolerances.pdf · This part of ISO 12488 specifies tolerances for

Cranes — Tolerances for wheels and travel ... - iso-iran.iriso-iran.ir/standards/iso/ISO_12488_1_2012_,_Cranes_,_Tolerances.pdf · This part of ISO 12488 specifies tolerances for

Documents
Flymateriel - webshop.ds.dk · EN 6069:2009 (E) 4 1 Scope This European Standard specifies the dimensions, tolerances and mass of rivets with 100° reduced flush head, close tolerance,

Flymateriel - webshop.ds.dk · EN 6069:2009 (E) 4 1 Scope This European Standard specifies the dimensions, tolerances and mass of rivets with 100° reduced flush head, close tolerance,

Documents
Audit Tolerances

Audit Tolerances

Documents