8/9/2019 EN 10270-2
1/20
ICS 77.140.25; 77.140.65
Stahldraht für Federn – Teil 2: Ölschlussvergüteter
Federstahldraht
European Standard EN 10270-2 : 2001 has the status of a DIN
Standard.
A comma is used as the decimal marker.
National foreword
This standard has been prepared by ECISS/TC 30/SC 2 ‘Steel wire
for mechanical springs’ (Secretariat:
Belgium).The responsible German body involved in its preparation
was the Normenausschuss Eisen und Stahl (Steeland Iron
Standards Committee).
DIN 50602 and DIN 50192 are the standards corresponding to ENV
10247 and EURONORM 104,respectively, referred to in clause 2 of the
EN.
Amendments
DIN 17223-2, September 1990 edition, has been superseded by the
specifications of EN 10270-2.
Previous editions
DIN 17223: 1955-04; DIN 17223-2: 1964-03, 1990-09.
National Annex NA Standards referred to(and not included in
Normative references )
DIN 50192 Determination of depth of decarburization of steel
DIN 50602 Metallographic examination – Microscopic examination
of special steel using standarddiagrams to determine the
non-metallic inclusions content
Ref. No. DIN EN 10270-2 : 2001-12English pr ice group 10 Sales
No.1110
04.02
DEUTSCHE NORM December 2001
EN 10270-2{
Continued overleaf.
EN comprises 18 pages.
© No part of this standard may be reproduced without the prior
permission ofDIN Deutsches Institut für Normung e.V., Berlin. Beuth
Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale
for German Standards (DIN-Normen) .
Steel wire for mechanical springsPart 2: Oil hardened and
tempered spring steel wire
English version of DIN EN 10270-2
Supersedes DIN 17223-2,September 1990 edition.
8/9/2019 EN 10270-2
3/20
English version
ICS 77.140.25; 77.140.65Descriptors:
Steel wire for mechanical springsPart 2: Oil hardened and
tempered spring steel wire
© 2001. CEN – All rights of exploitation in any form and by any
meansreserved worldwide for CEN national members.
Ref. No. EN 10270-2 : 2001 E
Stahldraht für Federn –Teil 2: Ölschlussvergüteter
Federstahldraht
This European Standard was approved by CEN on 2001-02-19.
CEN members are bound to comply with the CEN/CENELEC Internal
Regulationswhich stipulate the conditions for giving this European
Standard the status of anational standard without any
alteration.
Up-to-date lists and bibliographical references concerning such
national stand-ards may be obtained on application to the
Management Centre or to anyCEN member.
The European Standards exist in three of ficial versions
(English, French, German). A version in any other language
made by translat ion under the responsibi lity of aCEN member into
its own language and notified to the Management Centre hasthe same
status as the official versions.
CEN members are the national standards bodies of Austria,
Belgium, the CzechRepublic, Denmark, Finland, France, Germany,
Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland,and the United
Kingdom.
EN 10270-2
Apri l 2001
Management Centre: rue de Stassart 36, B-1050 Brussels
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
ÈÉË
Fils en acier pour ressortsmécaniques – Partie 2: Fils en
acier trempés à l’huile et revenus
