Product range at a glance

Flat rolled products

�

Systems. Service. Steel.

The stock keeping trade is the perfect combination of sales, services, storage and logistics – worldwide.

A customer-orientated sales concept and an individual service are our particular strengths. The basis of our success, however, is represented by the products, which stand out with the highest quality and predominantly originate from the group’s own pro-duction.

It is our goal to satisfy customers with lasting trust in our products and services. We are committed to realising this: in our company, in the entire group, at every single level – and in everything that we accomplish for you.

Structural steel platesHot rolled steel plates in quality S 2�5 JRG2/DIN EN 10025Standard-no. 1.00�8Tolerances DIN EN 10029, certificate DIN EN 10204/�.1 B Thickness 3 – 120 mmWidth 1,000 – 3,500 mm Length 2,000 – 12,000 mm

Tear Plates in quality S 2�5JRG2/DIN 59220Thickness 3 – 15 mmWidth 1,000 – 1,500 mmLength 2,000 – 3,000 mm

Hot rolled steel plates in quality S2�5JRG2/DIN EN 10025, DD11/DIN EN 10111With or without skin-pass, pickled, oiled/unoiledStandard-no. 1.00�8/1.0��2Tolerances DIN EN 10029/10051, certificate DIN EN 10204/2.2Thickness 1.5 – 12 mmWidth 1,000 – 1,500 mm Length 2,000 – 3,000 mm

Hot rolled steel plates in quality S�55J2G�/DIN EN 10025 Standard-no. 1.0570 Tolerances DIN EN 10029, certificate DIN EN 10204/�.1 BThickness 3 – 200 mmWidth 1,000 – 3,500 mm Length 2,000 – 12,000 mm

General pressure vessel steelBoiler plates in quality P265GH/DIN EN 10028 Standard-no. 1.0425 Tolerances DIN EN 10029, certificate DIN EN 10204/�.1 BThickness 3 – 120 mm Width 1,000 – 3,500 mm Length 2,000 – 14,000 mm

Flat rolled products Flat rolled products

4

Shipbuilding platesNormal qualities to the specifications of the classification agency German Lloyd or other inspectionGL – A, GL – B, GL – D, GL – E Thickness 3 – 150 mmWidth 1,000 – 3,500 mmLength 2,000 – 12,000 mm

High-tensile qualities to the specifications of the classification agency German Lloyd or other inspectionGL – A �2, GL – D �2, GL – A �6, GL – D �6, GL – E �2, GL – E �6Thickness 3 – 150 mmWidth 1,000 – 3,500 mmLength 2,000 – 12,000 mm

Cold rolled steel sheetsDC 01/DIN EN 101�0, oiled/unoiled Standard-no. 1.0��0 Tolerances DIN EN 101�1, certificate DIN EN 10204/2.2Thickness 0.5 – 2.99 mmWidth 1,000 – 1,500 mmLength 2,000 – 3,000 mm

Surface coated sheetsHot dipped galvanized sheets DX 51 D + Z 275 NA CR/DIN EN 10142 (ST02Z275 NACR) Standard-no. 1.0226Tolerances DIN EN 1014�, certificate DIN EN 10204/2.2Thickness 0.5 – 5 mmWidth 1,000 – 1,500 mmLength 2,000 – 3,000 mm

Electrolytically galvanized sheetsDC 01 + ZE 25/25 APC/DIN EN 10152 (ST12ZE25/25-0� PHCR) Standard-no. 1.0��0Tolerances DIN EN 101�1, certificate DIN EN 10204/2.2Thickness 1.00 – 2.99 mmWidth 1,000 – 1,500 mmLength 2,000 – 3,000 mm

Special abrasion resistant steelASH 80 (200-265 hardness) acc. to SEMI MANAX 3 – 15 mmASH 90 (1.8704) (min. 265 hardness) 5 – 60 mm ASH 120 / Brinar 400 (min. 360 hardness) 3 – 120 mm ASH 150 / Brinar 500 5 – 50 mm

High strength fine grained structural steelDIN EN 101�7-2S690 QL/QL 1 4 – 200 mmS890 QL 5 – 60 mmS960 QL 5 – 60 mmS1100 QL 6 – 30 mm

Weldable fine grained structural steel for cold formingDIN EN 10149-2S355 MC (QSTE380TM) 2 – 20 mm (1 – 12 mm also in pickled and oiled)S460 MC (QSTE460TM) 8 – 20 mmS500 MC (QSTE500TM) 3 – 10 mmS700 MC (QSTE690TM) 2 – 20 mm

Alloyed case hardening steelDIN EN 1008416MnCr5 3 – 200 mm20MnCr5 3 – 200 mm

Alloyed heat resistant steelDIN EN 10028-216Mo3 1 – 150 mm13CrMo4-5 5 – 200 mm10CrMo9-10 5 – 100 mmP295GH 8 – 50 mmP355GH 8 – 50 mm

Fine grained structural steel for constructions and pressure vesselsDIN EN 10028-� / DIN EN 1011�P355NL1 / P355NH 4 – 200 mmS355NL 5 – 120 mmP460NL1 5 – 120 mmS460NL 5 – 120 mm

5

Non-alloyed heat resistant and heat treatable steel DIN EN 1008�42CroMo4 3 – 200 mmC45 2 – 150 mm

Weatherproof steelDIN EN 10155 / SEW 097Corten A 1 – 2.5 mmCorten B/S355J2G1W(C) 3 – 50 mm

Plates acc. to ASTM / ASME – StandardASME SA 516 Gr. 60 3 – 80 mmASTM A / ASME SA 516 Gr. 70 5 – 80 mmASTM A / ASME SA 387 Gr. 11 CL.2 6 – 70 mmASTM A / ASME SA 387 Gr. 12 CL.2 5 – 120 mmASTM A / ASME SA 387 Gr. 22 CL.2 5 – 100 mm

Sheet metals from heat resistant, high grade and stainless steel 1.4301 / AISI 304 / 304 L / 304 H 1.4541 / AISI 321 1.4571 / AISI 316 Ti 1.4404 / AISI 316 L 1.4828 / AISI 309 1.4841 / AISI 310 1.4878Surface finish hot rolled C2/IIAThickness 3.0 – 70 mmDimension 1,500 x 6,000 mm 2,000 x 6,000 mm 2,500 x 6,000 mm 2,500 x 8,000 mm 3,000 x 6,000 mm

Cuttings from tool steel grades C45W 1.23111.23121.2842

on request

Pipes

6

Long rolled products / Special service

Special service· Since 2000 our enterprise disposes of a certification to DIN EN ISO 9001. All essential operations were documented

for this certification, which now serves our personal as guideline for optimum order processing

· Shotblasting and primer in our own stock

· Cutting of profiles, plates, hollow sections and tubes

· Through thickness testing in accordance with SEL 096 (Z 15, Z 25, Z �5)

· Bead-on weld tests acc. to SEP 1�90

· Add. DIN EN 10204/�.1 by TÜV, DB, GL, LR or other inspection

· Ultrasonic test acc. to classifications and conditions of SEL 072, DIN EN 10160, ASME / ASTM 4�5

Salzgitter Stahlhandel GmbHBranch Kather Stahlhandel Beisenstraße 5�45964 GladbeckGermanyFax: +49 (0)204� 407-870

Markus Pieper, Director +49 (0)204� 407-800markus.pieper@szmh-group.com

Helga Jansen, Secretary +49 (0)204� 407-825helga.jansen@szmh-group.com

Beams/Channels/Wide flanged beams Quality S 2�5JRG2 – 6 - 22 m lengthHEB 100 – 1,000 mmHEA 100 – 1,000 mmHEM 100 – 1,000 mmIPE 80 – 600 mmUNP 80 – 400 mmINP 80 – 550 mmUPE 80 – 400 mm

Quality S �55J2G� – 6 - 22 m length HEB 100 – 1,000 mmHEA 100 – 1,000 mmHEM 100 – 1,000 mmIPE 80 – 600 mmUNP 80 – 400 mmUPE 80 – 400 mm

Cold sawcuts on request, tolerances down to +/- 1 mmBevel cuts acc. to drawings

Merchant BarsQuality S 2�5JRG2 / S �55JO-J2G� Length of 6 and/or 12 mFlat bars 16 – 150 mmEqual angles 20 – 200 mmUnequal anlges 40 x 20 – 250 x 90 mmRound bars 6 – 200 mmSquare bars 6 – 100 mm Small channels 30 – 65 mmT-bars 20 – 140 mmHR-Strip 20 x 3 – 150 x 6 mm

Water-bearing steel pipes DIN EN 10255 / DIN 2440 / 2441Dimensions 1/4“ – 6“

DIN EN 10224 / DIN 2460External dimensions seamless 88.9 – 508.0 mm welded 88.9 – 2,020.0 mmThickness seamless until 11.0 mm welded until 17.5 mm

Seamless steel tubes for pressure purposesDIN EN 10216-1 or rather DIN EN 10216-� / DIN 1629DIN EN 10216-2 / DIN 17175, DIN EN 10216-� / DIN 1629External dimensions 10.2 – 711.0 mmThickness until 100.0 mm

Welded steel tubes for pressure purposesDIN EN 10217-1 / DIN 1626External dimensions 10.2 – 2,540.0 mmThickness until 40.0 mm

Seamless circular steel tubes for mechanical and general engineeringDIN EN 10297-1External dimensions 26.9 – 610.0 mmThickness until 100.0 mm

Steel tubes for structural applicationsDIN EN 10210 / DIN 17120, 17121, 1712�, 17124, 59410DIN EN 10219 / DIN 17120, 59411External dimensions round 21.3 – 1,219.0 mm (seamless until 660.0) square 20 x 20 mm – 400 x 400 mm rectangular 30 x 20 mm – 500 x 300 mm elliptical 120 x 60 mm – 480 x 240 mmThickness round until 50.0 mm square and rectangular until 20.0 mm elliptical until 16.0 mm

Steel tubes for precision applicationsDIN EN 10�05-1 to - 5 / DIN 2�91, 2�9�, 2�94, 2�95External dimensions round 4.0 – 165.0 mm square 10 x 10 mm – 100 x 100 mm rectangular 20 x 10 mm – 120 x 60 mmThickness round 0.5 – 12.5 mm square and rectangular 1.0 – 4.0 mm

Line pipes for gases and flammable liquidsDIN EN 10208 / DIN 2470-1, DIN 1626, 1629, 17172External dimensions 33.7 – 1,626.0 mm (seamless until 660.0)Thickness until 40.0 mm

Sal

es o

rgan

isat

ion

SS

H P

rodu

ct r

ange

01

E/0

6.05

Salzgitter Stahlhandel GmbHSchwannstraße 1240476 DüsseldorfPostfach 30 09 4340409 DüsseldorfGermany Tel.: +49 211 4300-1Fax: +49 211 4300-90

www.salzgitter-stahlhandel.de

Branch office Lauchhammer Lindenstraße 701979 LauchhammerPostfach 03 01 7001973 LauchhammerTel.: +49 3574 4679-0Fax: +49 3574 4679-487

Branch office KöthenFriedrich-Ebert-Straße 3906366 KöthenPostfach 11 5806351 KöthenTel.: +49 3496 501-0Fax: +49 3496 501-215

Sales officeBerlin Seidelbastweg 13312357 BerlinTel.: +49 30 66099-0Fax: +49 30 66099-109

Branch office Hamburg Andreas-Meyer-Straße 1522113 HamburgPostfach 74 07 1022097 HamburgTel.: +49 40 78958-0Fax: +49 40 78958-237

Sales officeOsterholz-Scharmbeck Am Binnenfeld 127711 Osterholz-ScharmbeckTel.: +49 4791 18-0Fax: +49 4791 18-10

Branch office Dobberkau StahlhandelHehlenkamp 629223 CelleTel.: +49 5141 3009-0Fax: +49 5141 3009-150 NiederlassungBranch office Hannover Wiesenauer Straße 1730179 HannoverPostfach 48 6730048 HannoverTel.: +49 511 6700-0Fax: +49 511 6700-204

Sales officeRöhrenzentrallagerSchwannstraße 1240476 DüsseldorfPostfach 30 10 0340410 DüsseldorfTel.: +49 211 4300-1Fax: +49 211 4300-653

Branch offices GladbeckAhlener StahlhandelKather StahlhandelBeisenstraße 5345964 GladbeckPostfach 5 2045955 GladbeckTel.: +49 2043 407-0Fax: +49 2043 407-991

Branch office Mannheim Dortmunder Straße 4-668219 MannheimPostfach 81 05 2968205 MannheimTel.: +49 621 8040-0Fax: +49 621 8040-110

Branch offices Plochingen FixmaßblechFeuchterAm Rheinkai 3073207 PlochingenPostfach 13 4073203 PlochingenTel.: +49 7153 601-0Fax: +49 7153 601-103

Sales office München Triebstraße 3280993 MünchenPostfach 50 06 6080976 MünchenTel.: +49 89 149099-0Fax: +49 89 141300-1

Branch office Fürth Hafenstraße 9190768 FürthPostfach 25 5290715 FürthTel.: +49 911 7570-0Fax: +49 911 7570-100

Sales officeDietikonLagerstraße 108953 DietikonTel.: +41 43 32291-30Fax: +41 43 32291-39

Branch officeAlacier3 rue d’Alger67000 StrasbourgB.P. 4967016 Strasbourg-CedexTel.: +33 388456590Fax: +33 388456599

Sales organisation