Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Emergency Lighting Catalogue
For further information on Thomas & Betts products and servicesPhone 1300 666 595 • Fax 1300 666 594 • www.tnbaust.com
Thomas & Betts Austalasia Pty Ltd Head Offi ce and manufacturing 23a Nyrang St, Lidcombe, NSW 2141 ABN 62 074 810 898
28398 Lighting Cat Cov FA.indd 128398 Lighting Cat Cov FA.indd 1 1/8/06 3:01:20 PM1/8/06 3:01:20 PM
Global LeaderFrom emergency lighting found in every commercialbuilding to electrical connections in underground minesto equipment wiring in robotic production plants, Thomas & Betts products can be found everywhere you fi nd electricity. We can offer one of the broadest product lines in the industry supplying items used in typical electrical applications – be it industrial or commercial construction, equipment maintenance and repair or original equipment manufacturing.
For almost 30 years, Stanilite® has been at the forefront of the Australian emergency lighting industry. Pioneering products such as the Quickfi t® Exit, Lumatec® Cold Cathode lamps, Nexus® monitoring system and Spitfi re® luminaire have cemented Stanilite® as the market leading brand. Beyond the product range, Thomas & Betts is renowned for itsability to offer superior technical support andguidance to specifi ers, contractors and end usersthrough a nationwide network of support offi ces.
1National Support CentrePh 1300 666 595 • Fax 1300 666 594
Australian StandardIn mid 2005 the Australian standards
relating to emergency lighting were updated with several changes that bring
them more in line with international standards. As of 1st May 2006, the revised standard is now
referenced by the Australian Building Code. This means that all development applications considered
under the new code will need to use exit signs and system designs that comply with:
• AS 2293.1-2005 Emergency escape lighting and exit signs for buildings - System design, installation and operation.
• AS 2293.3-2005 Emergency escape lighting and exit signs for buildings - Emergency escape luminaires and exit signs.
The most dramatic change to the standard, is the move from the use of the word “EXIT” to the use of a pictograph on the face of exit sign diffusers. The
new standard also omits the use of an “arrows both ways” sign thereby requiring the designer to indicate the evacuation path in one direction.
The 2005 standard also reviewed the viewing distances of different size pictographs and stipulates that the maximum viewing distance of a sign must clearly be displayed on the
face of the diffuser.For full information regarding the changes to AS2293 we strongly recommend interested parties
purchase a copy from SAI Global.
Energy Effi cient LightingLaunched in 2000 the Stanilite Lumatec® cold cathode lamp combines signifi cant energy savings with the convenience of a user replaceable lamp. Utilising the same technology as seen in LED screens, the Lumatec® lamp was recently selected for use in the Lighting Council’s new energy effi cient lighting pilot programme beating competitive technologies including LCD.
Signifi cant features include:ReliabilityLumatec® lamps do not burn out! Lamp burn out is the most common cause for failure with conventional lamps, leaving the building owner with a potential occupant safety risk. Lumatec® lamps come with up to a 6 year (50,000 hour) rated lamp life.In that same period a standard fl uorescent lamp would need to be replaced in excess of 6 times and hence has a much higher life cycle cost.High operating temperatures are a minor issue for Lumatec® lamps unlike LEDs and hence cold cathode lamp life is not compromised in the tough Australian conditions.
Energy SavingsStanilite Lumatec® cold cathode technology offers signifi cant energy savings (up to 300%) over competing 8/10W fl uorescent lamps.Not only do they produce a clean white light but they do it effi ciently unlike many of the LED technologies on the market.
Rugged DesignDespite it’s slim appearance, the Lumatec® lamp element has been installed in a tough 7mm diameter outer protective glass housing with rugged wedge shaped ends. This has been done to ensure that anyone can replace the lamp without fear of breakage.
Quickfi t® Slide and ConnectStanilite® fi rst designed and introduced the Quickfi t® slide and connect exit in 1981. In 2006, the Quickfi t® remains the fi rst choice for designers seeking a high quality, Australian designed and made exit sign that is built to ensure occupant safety when it really matters.Pivotal to the design and success of the Quickfi t® has been the unique steel slide and connect bracket. Many have copied this award winning Quickfi t® design but none are a match for the original and best. The design features: • Wall or ceiling mounting using the same bracket reduces costs and
speeds installation. Only the bracket needs to be installed during fi tout which eliminates potential fi tting damage during construction.
• Positive location for the power connector ensures the sign is always properly connected.
• 16mm power terminals enable easy TPS junctioning inside the bracket protected by a full length cover for safety.
• Swapping and upgrading can be undertaken without tools making for easy maintenance.
No wonder the Quickfi t® is Australia’s fi rst choice in exit signs.
2National Support CentrePh 1300 666 595 • Fax 1300 666 594
Awards• Australian Manufacturing Product of the Year (Australian Industry Awards 2001) • Commendation for Best Product in Manufacture (Queensland IES 2001) • Luminaire Design Award of Commendation (IES the Lighting Society 2001) • DesignMarkTM (Australian Design Awards 2002)
ec®
y
Nexus® Emergency Lighting Monitoring System
In 1993, the Stanilite Nexus® Emergency Lighting Monitoring system was released and took the market by storm. Since then, it has become the system of choice when building designers
and owners are seeking to minimise maintenance costs and ensure the safety of building occupants. High profi le buildings such as Westfi eld shopping centres and Star City Casino
utilise the Nexus® system due to the many benefi ts it delivers and the through life support offered by Thomas & Betts technical staff.
The Nexus LX® system communicates over a dedicated data cable which provides both high speed communication and extreme reliability. Nexus® allows users to
• Manage the installation and removal of components
• Cost effectively test & monitor the system
• Manage maintenance activities
• Prepare reports to satisfy AS 2293.2
Most Thomas & Betts Stanilite® emergency light fi ttings are available in a Nexus® compatible model.
Designed for AustraliaAll Stanilite® light fi ttings have been designed to comply with Australian standards and perform in Australian conditions.
Whilst the Australian standard specifi es minimum performance requirements, Stanilite® have always prided themselves on producing products that will stand the test of time in the harsh Australian conditions. The choice of body materials, electronic components, batteries and lamps are all impacted by the desire to produce the highest quality products on the Australian market at a value formoney price.
Designers, contractors and end users all know that they can trust the Stanilite® name.
⎧ Basic Nexus Network ⎫
3National Support CentrePh 1300 666 595 • Fax 1300 666 594
4National Support CentrePh 1300 666 595 • Fax 1300 666 594
GLOSSARY OF TERMINOLOGY USED
Australian Standard AS2293The standard that sets out the requirements for the design, installation and operation of emergency evacuation lighting systems for buildings. The Standard is divided into 3 parts:
Part 1: System Design, Installation and Operation. Part 2: Inspection and Maintenance. Part 3: Emergency Luminaires and Exit Signs.
Back PlateOpaque plastic plate designed to protect the back of a fi tting and allow fl ush wall mounting.
BodyThe body refers to the housing of the fi tting without the back plate (where applicable) or diffuser. The body usually contains the control gear.
Cold Cathode LampsUtilising the same technology as seen in LCD screens, cold cathode lamps are an energy and cost saving alternative to standard fl uorescent lamps.
DiffuserTranslucent part which fi ts to the face of a light fi tting in order to soften or spread the light over a wide area.
Discharge Test The current AS2293 standard dictates that an evacuation fi tting must pass a 120 minute discharge test upon commissioning and 90 minute tests conducted at 6 monthly intervals there after.
Dual Rate ChargeAfter an AC failure, the dual rate charger switches to a higher charging current for a timed period, then switches to a lower rate.
Halogen Lamp A specialised type of incandescent lamp used in downlight emergency luminaires and fl ood lights. They produce a crisp, white light and allow precise light focusing.
IP RatingThe Ingress Protection (IP) rating indicates the degree of protection provided by an enclosure from solid objects & water. The IP rating consists of 2 numbers eg IP65. The fi rst number indicates the protection from solid objects such as dust. The second number refers to the protection against water. The higher the numbers the better the degree of protection. The maximum rating is IP68.
Maintained A fi tting where the emergency light source is energised at all times i.e during both normal and emergency operation.
5National Support CentrePh 1300 666 595 • Fax 1300 666 594
GLOSSARY OF TERMINOLOGY USED
Non Maintained A fi tting where the emergency light source only operates when there is a mains failure.
Peel Off ArrowsA versatile diffuser option offering a choice from either a “left from here”, “right from here” or “arrow both ways” Exit by peeling off the arrow.
Photometric Classifi cation
Classifi cation based on the measurement of the luminous intensities of visible light sources. The classifi cation isused in conjunction with a photometric chart to determine luminaire spacings for given mounting heights.
Power Pack A device for converting electrical supply to direct or alternating current at the correct voltage for a fi tting.
Single Point Unit (SPU)A fi tting that stands alone (at a single point) and includes its own rechargeable battery and charger equipment.When normal mains power fails, it automatically energises its emergency lamp until the power is restored orthe battery discharges.
Standard A Standard fi tting refers to an EXIT or PICTO - white on green.
Sustained (Combined Non Maintained) A two lamp combination of normal lighting and non-maintained emergency lighting located side by side within the same luminaire. One lamp is used for normal lighting and the other for emergency lighting. The light output is sustained even when the power has failed.
Theatre Mask A Theatre Mask fi tting refers to EXIT or PICTO – green on black, suitable for low light environments. Theatre mask exits do not have an emergency classifi cation.
Variable Rate ChargingVaries the current according to the battery “charged” condition. The rate is higherafter an AC failure but reduces as battery capacity is restored.
Wire Guard Protective wire casing offering the fi ttings lamp and/or difuse extra protection.
Batten Wire Guard
6National Support CentrePh 1300 666 595 • Fax 1300 666 594
QUICKFIT® 10W EXITS STANDARD AND
THEATRE PICTOGRAPH
The Quickfi t range of exits are Australia’s fi rst choice for quality signage. The Quickfi t features a unique steel slide and connect bracket that provides strength, is compatible with all current and previous models for easy retrofi t, and enables quick and easy maintenance. Only the Quickfi t bracket needs to be installed during fi tout, which can greatly reduce damage.Switch mode electronics and smart design provide excellent reliability, energy effi ciency and long life performance from all components including lamps and batteries. The Quickfi t is available in a complete range including Theatre Mask and Nexus models to cater for the entire project. Features• BBEB electronic ballast technology – providing
extended lamp life• Up to 250% lower power consumption than
comparable exits• Theatre exit designed for use in theatres
and auditoriums• Advanced variable rate battery charger with
high temperature NiCad batteries • 24m viewing distance
Quickfi t® 10W Standard – Pictograph
Part No. DescriptionPQF110MSS 1x10W Maintained Single SidedPQF110MDS 1x10W Maintained Double SidedPQF210SSS 2x10W Sustained Single SidedPQF210SDS 2x10W Sustained Double Sided
Note The above Standard 10W Quickfi ts® include all Pictograph insert options.
Quickfi t® 10W Theatre Mask – Pictograph
PQFB110M-0001 1x10W T/Mask Maintained Single Sided PICTOPQFB110M-0002 1x10W T/Mask Maintained Single Sided <PICTOPQFB110M-0003 1x10W T/Mask Maintained Single Sided PICTO>PQFB110M-0005 1x10W T/Mask Maintained Double Sided PICTOPQFB110M-0006 1x10W T/Mask Maintained Double Sided AOW PICTOPQFB210S-0001 2x10W T/Mask Sustained Single Sided PICTOPQFB210S-0002 2x10W T/Mask Sustained Single Sided <PICTOPQFB210S-0003 2x10W T/Mask Sustained Single Sided PICTO>PQFB210S-0005 2x10W T/Mask Sustained Double Sided PICTOPQFB210S-0006 2x10W T/Mask Sustained Double Sided AOW PICTO
Note Theatre mask range does not use inserts. Theatre mask exits do not have an emergency classifi cation.
7National Support CentrePh 1300 666 595 • Fax 1300 666 594
Quickfi t® 10W Standard Nexus® – Pictograph
Part No. DescriptionPQFNXS110MSS 1x10W Nexus Maintained Single Sided PQFNXS110MDS 1x10W Nexus Maintained Double Sided PQFNXS210SSS 2x10W Nexus Sustained Single Sided PQFNXS210SDS 2x10W Nexus Sustained Double Sided
Note The above Nexus® 10W Standard Quickfi ts® are supplied with all pictograph insert options.
Quickfi t® 10W Theatre Mask Nexus® – Pictograph PQFBNXS110M-1 1x10W Nexus T/Mask Maintained Single Sided PICTOPQFBNXS110M-2 1x10W Nexus T/Mask Maintained Single Sided <PICTOPQFBNXS110M-3 1x10W Nexus T/Mask Maintained Single Sided PICTO>PQFBNXS110M-5 1x10W Nexus T/Mask Maintained Double Sided PICTOPQFBNXS110M-6 1x10W Nexus T/Mask Maintained AOW PICTO
Note Theatre mask range does not use inserts. Theatre mask exits do not have an emergency classifi cation.
Exit Inserts
Standard Pictograph Quickfi ts® are supplied with all Pictograph insert options. For EXIT Insert Peel off Arrow,see below table:
Part No. Description29-E1-10 EXIT Insert Peel off Arrow 10 Pack
PICTO <PICTO PICTO> Straight from here Left from here Right from here
QUICKFIT® 10W EXITS STANDARD AND
THEATRE PICTOGRAPH
8National Support CentrePh 1300 666 595 • Fax 1300 666 594
Technical Specifi cations
Photometrics & Luminaires SpacingsProduct Classification Mounting Height In Metres 2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.0PQF110MSS C0 E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0 PQFNXS110MSS C90 E1.6 4.8 4.8 4.8 4.4 4.0 4.2 3.8 PQF110MDS C0 D4 7.2 7.3 7.3 7.3 7.3 7.2 6.9 6.5 5.8 3.1PQFNXS110MDS C90 E3.2 6.0 6.2 6.4 6.6 6.6 6.6 6.6 5.8 5.8 PQF210SSS C0 E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0 PQFNXS210SSS C90 E1.6 4.8 4.8 4.8 4.4 4.0 4.2 3.8 PQF210SDS C0 D4 7.2 7.3 7.3 7.3 7.3 7.2 6.9 6.5 5.8 3.1PQFNXS210SDS C90 E3.2 6.0 6.2 6.4 6.6 6.6 6.6 6.6 5.8 5.8
Note Under AS2293.1-2005, exit signs shall be mounted not less than 2m and not more than 2.7m above fl oor level, or immediately above the doorway if the doorway is higher than 2.7m. However, variations to these heights shall be allowedwhen specifi cally agreed by the relevant regulatory authority.
Single Sided Double Sided
Dimensions
Power Consumption
240V AC 50HZ• 10W Quickfi t Exit 9.2W• 10W Quickfi t Nexus Exit 9.5W
Construction
• Body Moulded ABS• Bracket Zinc Steel – Powder Coated• Diffuser Moulded Acrylic
QUICKFIT® 10W EXITS STANDARD AND
THEATRE PICTOGRAPH
379.0
87.0
72.0
212.0
379.0
212.0
72.0
102.0
9National Support CentrePh 1300 666 595 • Fax 1300 666 594
Parts & Accessories
Part No. DescriptionBodiesMQF110MMQD-0010 Quickfi t 1x10W Exit no diffuser or back plateMQF110MMQD-0011 Quickfi t 1x10W Exit no diffuser MQF210SMQD-0010 Quickfi t 2x10W Exit no diffuser or back plateMQF210SMQD-0011 Quickfi t 2x10W Exit no diffuser MQFNXS110MQD-10 Quickfi t 1x10W Nexus Exit no diffuser or back plateMQFNXS110MQD-11 Quickfi t 1x10W Nexus Exit no diffuserPQFB110M-0010 Quickfi t 1x10W T/Mask no diffuser or back platePQFB110M-0011 Quickfi t 1x10W T/Mask no diffuserPQFB210S-0010 Quickfi t 2x10W T/Mask no diffuser or back platePQFB210S-0011 Quickfi t 2x10W T/Mask no diffuser PQFBNXS110M-10 Quickfi t 1x10W Nexus T/Mask no diffuser or back plate PQFBNXS110M-11 Quickfi t 1x10W Nexus T/Mask no diffuser
Diffusers31-PQF Quickfi t 10W Pictograph diffuser - includes PICTO inserts31-PQF-B Quickfi t 10W Pictograph diffuser - no inserts31-PQFT1 Quickfi t 10W Pictograph theatre mask PICTO diffuser31-PQFT2 Quickfi t 10W Pictograph theatre mask <PICTO diffuser31-PQFT3 Quickfi t 10W Pictograph theatre mask PICTO> diffuser
Back plates31-MQBP Back plate to suit Quickfi t standard 31-MQBPB Back plate to suit Quickfi t theatre
Wire guardsQFWGCM Quickfi t wire guard ceiling mountQFWGWM Quickfi t wire guard wall mount
Mounting Bracket03-02060 Ceiling bracket assembly white powder coated03-02061 Ceiling bracket assembly black powder coatedMQFCL Cantilever mounting bracket
Lamps15-00215 Lamp to suit 10W Quickfi ts
Batteries 03-01204 Battery 3 cell sub C to suit 10W Quickfi ts
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
QUICKFIT® 10W EXITS STANDARD AND
THEATRE PICTOGRAPH
MQFCL Bracket
10National Support CentrePh 1300 666 595 • Fax 1300 666 594
The Quickfi t range of exits are Australia’s fi rst choice for quality signage. The Quickfi t features a unique steel slide and connect bracket that provides strength, is compatible with all current and previous models for easy retrofi t, and enables quick and easy maintenance. Only the Quickfi t bracket needs to be installed during fi tout, which can greatly reduce damage.Switch mode electronics and smart design provide excellent reliability, energy effi ciency and long life performance from all components including lamps and batteries. The Quickfi t is available in a complete range including Theatre Mask and Nexus models to cater for the entire project. Features• BBEB electronic ballast technology – providing
extended lamp life.• Up to 250% lower power consumption than
comparable exits.• Theatre mask designed for use in theatres and
auditoriums. • Advanced variable rate battery charger with high
temperature NiCad batteries.
QUICKFIT® 10W EXITSSTANDARD AND THEATRE
Quickfi t® 10W Standard
Part No. Description MQF110MSS 1x10W Maintained Single Sided, Peel off Arrow EXIT InsertMQF110MDS 1x10W Maintained Double Sided, Peel off Arrow EXIT InsertMQF210SSS 2x10W Sustained Single Sided, Peel off Arrow EXIT InsertMQF210SDS 2x10W Sustained Double Sided, Peel off Arrow EXIT Insert
Quickfi t® 10W Theatre Mask
MQFB110MMQT-1 1x10W T/Mask Maintained Single Sided EXITMQFB110MMQT-2 1x10W T/Mask Maintained Single Sided <EXITMQFB110MMQT-3 1x10W T/Mask Maintained Single Sided EXIT>MQFB110MMQT-4 1x10W T/Mask Maintained Single Sided <EXIT>MQFB110MMQT-5 1x10W T/Mask Maintained Double Sided EXITMQFB110MMQT-6 1x10W T/Mask Maintained Double Sided AOW EXITMQFB110MMQT-7 1x10W T/Mask Maintained Double Sided <EXIT>MQFB210SMQT-1 2x10W T/Mask Sustained Single Sided EXITMQFB210SMQT-2 2x10W T/Mask Sustained Single Sided <EXITMQFB210SMQT-3 2x10W T/Mask Sustained Single Sided EXIT>MQFB210SMQT-4 2x10W T/Mask Sustained Single Sided <EXIT>MQFB210SMQT-5 2x10W T/Mask Sustained Double Sided EXITMQFB210SMQT-6 2x10W T/Mask Sustained Double Sided AOW EXITMQFB210SMQT-7 2x10W T/Mask Sustained Double Sided <EXIT>
Note Theatre mask range does not use inserts. Theatre mask exits do not have an emergency classifi cation.
11National Support CentrePh 1300 666 595 • Fax 1300 666 594
Power Consumption
240V AC 50HZ• 10W Quickfi t Exit 9.2W• 10W Quickfi t Nexus Exit 9.5W
Construction
• Body Moulded ABS• Bracket Zinc Steel – Powder Coated• Diffuser Moulded Acrylic
Technical Specifi cations
Photometrics & Luminaires Spacings
Product Classification Mounting Height in Metres 2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.0MQF110MSS C0 E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0 MQFNXS110MSS C90 E1.6 4.8 4.8 4.8 4.4 4.0 4.2 3.8 MQF110MDS C0 D4 7.2 7.3 7.3 7.3 7.3 7.2 6.9 6.5 5.8 3.1MQFNXS110MDS C90 E3.2 6.0 6.2 6.4 6.6 6.6 6.6 6.6 5.8 5.8 MQF210SSS C0 E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0 MQFNXS210SSS C90 E1.6 4.8 4.8 4.8 4.4 4.0 4.2 3.8 MQF210SDS C0 D4 7.2 7.3 7.3 7.3 7.3 7.2 6.9 6.5 5.8 3.1MQFNXS210SDS C90 E3.2 6.0 6.2 6.4 6.6 6.6 6.6 6.6 5.8 5.8
Note Under AS2293.1-2005, exit signs shall be mounted not less than 2m and not more than 2.7m above fl oor level, or immediately above the doorway if the doorway is higher than 2.7m. However, variations to these heights shall be allowed when specifi cally agreed by the relevant regulatory authority.
Quickfi t® 10W Theatre Mask Nexus®
MQFBNXS110MMQT-1 1x10W Nexus T/Mask Maintained Single Sided EXITMQFBNXS110MMQT-2 1x10W Nexus T/Mask Maintained Single Sided <EXITMQFBNXS110MMQT-3 1x10W Nexus T/Mask Maintained Single Sided EXIT>MQFBNXS110MMQT-4 1x10W Nexus T/Mask Maintained Single Sided <EXIT>MQFBNXS110MMQT-5 1x10W Nexus T/Mask Maintained Double Sided EXITMQFBNXS110MMQT-6 1x10W Nexus T/Mask Maintained Double Sided AOW EXITMQFBNXS110MMQT-7 1x10W Nexus T/Mask Maintained Double Sided <EXIT>
Note Theatre mask range does not use inserts. Theatre mask exits do not have an emergency classifi cation.
QUICKFIT® 10W EXITSSTANDARD AND THEATRE
Quickfi t® 10W Standard Nexus®
Part No. Description MQFNXS110MSS 1x10W Nexus Maintained Single Sided, Peel off Arrow EXIT InsertMQFNXS110MDS 1x10W Nexus Maintained Double Sided, Peel off Arrow EXIT InsertMQFNXS210SSS 2x10W Nexus Sustained Single Sided, Peel off Arrow EXIT InsertMQFNXS210SDS 2x10W Nexus Sustained Double Sided, Peel off Arrow EXIT Insert
12National Support CentrePh 1300 666 595 • Fax 1300 666 594
Dimensions
Parts & Accessories
Part No. DescriptionBodiesMQF110MMQD-0010 Quickfi t 1x10W Exit no diffuser or back plateMQF110MMQD-0011 Quickfi t 1x10W Exit no diffuser MQF210SMQD-0010 Quickfi t 2x10W Exit no diffuser or back plate MQF210SMQD-0011 Quickfi t 2x10W Exit no diffuserMQFNXS10MQD-10 Quickfi t 1x10W Nexus Exit no diffuser or back plateMQFNXS10MQD-11 Quickfi t 1x10W Nexus Exit no diffuserMQFB110MMQT-10 Quickfi t 1x10W T/Mask no diffuser or back plateMQFB110MMQT-11 Quickfi t 1x10W T/Mask no diffuserMQFB210SMQT-10 Quickfi t 2x10W T/Mask no diffuser or back plateMQFB210SMQT-11 Quickfi t 2x10W T/Mask no diffuserMQFBNXS110MMQT-10 Quickfi t 1x10W Nexus T/Mask no diffuser or back plate
MQFBNXS110MMQT-11 Quickfi t 1x10W Nexus T/Mask no diffuser
Diffusers31-MQDPO Quickfi t 10W diffuser – includes EXIT insert peel off arrows31-MQD9 Quickfi t 10W opal diffuser31-MQT1 Quickfi t 10W theatre mask diffuser – laser cut EXIT31-MQT2 Quickfi t 10W theatre mask diffuser – laser cut<EXIT31-MQT3 Quickfi t 10W theatre mask diffuser – laser cut EXIT>31-MQT4 Quickfi t 10W theatre mask diffuser – laser cut <EXIT>31-MQBF Breakfront diffuser single sided EXIT
Back Plates31-MQBP Back plate to suit Quickfi t standard 31-MQBPB Back plate to suit Quickfi t theatre
Wire Guards & Mounting BracketQFWGCM Quickfi t wire guard ceiling mountQFWGWM Quickfi t wire guard wall mount 03-02060 Ceiling bracket assembly white powder coated03-02061 Ceiling bracket assembly black powder coatedMQFCL Cantilever mounting bracket
Lamps & Batteries15-00215 Lamp to suit 10W Quickfi ts03-01204 Battery 3 cell sub C to suit 10W Quickfi ts
Note 31-MQBF does not comply with Australian Standard AS2293
31-MQBF
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
QUICKFIT® 10W EXITSSTANDARD AND THEATRE
MQFCL Bracket
379.0 87.072.0
212.0
212.0
379.0 102.0
72.0
Single Sided Double Sided
www.tnbaust.com
To talk about using LUMATEC®
Cold Cathode
Technology on your next development call
QUICKFIT® LUMATEC® COLDCATHODE 50,000HR EXIT
STANDARD AND THEATRE PICTOGRAPH
The Quickfi t range of exits is Australia’s fi rst choice for quality signage. Featuring cold cathode technology, the Quickfi t Lumatec line up uses the only proven long life lamp in the Australian evacuation signage market. The Lumatec lamp is not only energy effi cient but only needs to be replaced every 50,000 hours. The Quickfi t also features a unique steel slide and connect bracket that provides strength, is compatible with all current and previous models for easy retrofi t and enables quick and easy maintenance. Only the Quickfi t bracket needs to be installed during fi tout, which can greatly reduce damage.The Quickfi t is available in a complete range including Theatre Mask and Nexus models to cater for the entire project.
Features• Stanilite Lumatec® cold cathode 6 year rated lamp • BBEB electronic ballast technology • Advanced dual rate battery charger with high
temperature NiCad batteries • Universal wall/ceiling mounting • 24m viewing distance
National Support CentrePh 1300 666 595 • Fax 1300 666 594 14
Quickfi t Lumatec® Cold Cathode 50,000HR Standard – Pictograph
Part No. DescriptionPQFDR50KSS 4W Maintained Single Sided DR 50K Hour LampPQFDR50KDS 4W Maintained Double Sided DR 50K Hour Lamp
Note The above Standard Lumatec Cold Cathode Quickfi ts® include all Pictograph insert options.
Quickfi t Lumatec® Cold Cathode 50,000HR Theatre Mask – Pictograph
PQFBDR50K-0001 4W Maintained T/Mask Single Sided DR 50K Hour Lamp, PICTOPQFBDR50K-0002 4W Maintained T/Mask Single Sided DR 50K Hour Lamp, <PICTOPQFBDR50K-0003 4W Maintained T/Mask Single Sided DR 50K Hour Lamp, PICTO>PQFBDR50K-0005 4W Maintained T/Mask Double Sided DR 50K Hour Lamp, PICTOPQFBDR50K-0006 4W Maintained T/Mask Double Sided DR 50K Hour Lamp, AOW PICTO
Note Theatre Mask range does not use inserts. Theatre mask exits do not have an emergency classifi cation.
Quickfi t Lumatec® Cold Cathode 50,000HR Standard Nexus® – Pictograph
Part No. DescriptionPQFNXSDR50KSS Nexus 4W Maintained Single Sided DR 50K Hour LampPQFNXSDR50KDS Nexus 4W Maintained Double Sided DR 50K Hour Lamp
Note The above Standard Nexus Cold Cathode Quickfi ts® include all Pictograph insert options.
Quickfi t Lumatec® Cold Cathode 50,000HR Theatre Mask Nexus® – Pictograph
Part No. DescriptionPQFBNXSDR50K-1 Nexus 4W Maintained T/Mask Single Sided DR 50K Hour Lamp, PICTOPQFBNXSDR50K-2 Nexus 4W Maintained T/Mask Single Sided DR 50K Hour Lamp, <PICTOPQFBNXSDR50K-3 Nexus 4W Maintained T/Mask Single Sided DR 50K Hour Lamp, PICTO>PQFBNXSDR50K-5 Nexus 4W Maintained T/Mask Double Sided DR 50K Hour Lamp, PICTOPQFBNXSDR50K-6 Nexus 4W Maintained T/Mask Double Sided DR 50K Hour Lamp, AOW PICTO
Note Theatre mask range does not use inserts. Theatre mask exits do not have an emergency classifi cation.
National Support CentrePh 1300 666 595 • Fax 1300 666 594 15
PICTO <PICTO PICTO> Straight from here Left from here Right from here
Technical Specifi cations
Photometrics & Luminaires Spacings
Product Classification Mounting Height in Metres
2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.0
PQFDR50KSS C0 E1.25 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0 C90 E1.25 4.2 4.2 4.0 3.6 4.0 3.0 PQFDR50KDS C0 E2.5 5.6 5.8 5.8 6.0 5.8 5.8 5.2 5.2 4.6 C90 E2.5 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0
* Nexus versions of the above have the same data
Note Under AS2293.1-2005, exit signs shall be mounted not less than 2m and not more than 2.7m above fl oor level, or immediately above the doorway if the doorway is higher than 2.7m. However, variations to these heights shall be allowedwhen specifi cally agreed by the relevant regulatory authority.
Exit Inserts
Lumatec Cold Cathode Standard Pictograph Quickfi ts® are supplied with all Pictograph insert options. For EXIT Insert Peel off Arrow, see below table:
QUICKFIT® LUMATEC® COLDCATHODE 50,000HR EXIT
STANDARD AND THEATRE PICTOGRAPH
Part No. Description29-E1-10 EXIT Insert Peel off Arrow 10 Pack
16
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
National Support CentrePh 1300 666 595 • Fax 1300 666 594
Parts & AccessoriesPart No. Description BodiesMQFDR50KMQ-0010 Quickfi t Lumatec CC 50K no diffuser or back plateMQFDR50KMQ-0011 Quickfi t Lumatec CC 50K no diffuserMQFNXSDR50KMQ-10 Quickfi t Nexus Lumatec CC 50K no diffuser or back plateMQFNXSDR50KMQ-11 Quickfi t Nexus Lumatec CC 50K no diffuserPQFBDR50K-0010 Quickfi t T/Mask Lumatec CC 50K no diffuser or back plate PQFBDR50K-0011 Quickfi t T/Mask Lumatec CC 50K no diffuserPQFBNXSDR50K-10 Quickfi t Nexus T/Mask Lumatec CC 50K no diffuser or back platePQFBNXSDR50K-11 Quickfi t Nexus T/Mask Lumatec CC 50K no diffuserDiffusers31-PQFCC Quickfi t Lumatec CC Pictograph diffuser – includes PICTO insert31-PQFCC-B Quickfi t Lumatec CC Pictograph diffuser – no insert31-PQFT1 Quickfi t 10W theatre mask PICTO diffuser 31-PQFT2 Quickfi t 10W theatre mask <PICTO diffuser 31-PQFT3 Quickfi t 10W theatre mask PICTO> diffuser Back Plates31-MQBP Back plate to suit Quickfi t standard 31-MQBPB Back plate to suit Quickfi t theatreWire GuardsQFWGCM Quickfi t wire guard ceiling mountQFWGWM Quickfi t wire guard wall mount Mounting Bracket03-02060 Ceiling bracket assembly white powder coated03-02061 Ceiling bracket assembly black powder coatedMQFCL Cantilever mounting bracketLampsCCFL4-5 Lumatec 4W lamp to suit Cold Cathode Quickfi ts – pack of 5Batteries03-01205 Battery 6 cell sub C to suit DR50K Quickfi ts
Single Sided – Double Sided dimensions are the same
Dimensions
Power Consumption
240V AC 50HZ• 4W Quickfi t Lumatec Exit 6.6W• 4W Quickfi t Lumatec Nexus Exit 7.2W
Construction
• Body Moulded ABS• Bracket Zinc Steel – White Powder Coated• Diffuser Moulded Acrylic
QUICKFIT® LUMATEC® COLDCATHODE 50,000HR EXIT
STANDARD AND THEATRE PICTOGRAPH
MQFCL Bracket
379.0 72.0
212.0
17
QUICKFIT® LUMATEC® COLDCATHODE 25,000HR EXIT
STANDARD AND THEATRE PICTOGRAPH
The Quickfi t range of exits is Australia’s fi rst choice for quality signage. Featuring cold cathode technology, the Quickfi t Lumatec line up uses the only proven long life lamp in the Australian evacuation signage market. The Lumatec lamp is not only energy effi cient but only needs to be replaced every 25,000 hours. The Quickfi t also features a unique steel slide and connect bracket that provides strength, is compatible with all current and previous models for easy retrofi t and enables quick and easy maintenance. Only the Quickfi t bracket needs to be installed during fi tout, which can greatly reduce damage.The Quickfi t is available in a complete range including Theatre Mask and Nexus models tocater for the entire project.
Features• Stanilite Lumatec® cold cathode 3 year rated lamp • BBEB electronic ballast technology • Universal wall/ceiling mounting • 24m viewing distance
Quickfi t Lumatec® Cold Cathode 25,000HR Standard – Pictograph
Part No. DescriptionPQFVR25KSS 4W Maintained Single Sided VR 25K Hr Lamp PQFVR25KDS 4W Maintained Double Sided VR 25K Hr Lamp
Note The above Standard Lumatec Cold Cathode Quickfi ts® include all Pictograph insert options.
Quickfi t Lumatec® Cold Cathode 25,000HR Theatre Mask – Pictograph
PQFBVR25K-0001 4W Maintained T/Mask Single Sided VR 25K Hr Lamp, PICTO DiffuserPQFBVR25K-0002 4W Maintained T/Mask Single Sided VR 25K Hr Lamp, <PICTO DiffuserPQFBVR25K-0003 4W Maintained T/Mask Single Sided VR 25K Hr Lamp, PICTO> DiffuserPQFBVR25K-0005 4W Maintained T/Mask Double Sided VR 25K Hr Lamp, PICTO DiffuserPQFBVR25K-0006 4W Maintained T/Mask Double Sided VR 25K Hr Lamp, AOW PICTO Diffuser
Note Theatre Mask range does not use inserts. Theatre mask exits do not have an emergency classifi cation.
National Support CentrePh 1300 666 595 • Fax 1300 666 594
PICTO <PICTO PICTO> Straight from here Left from here Right from here
18National Support CentrePh 1300 666 595 • Fax 1300 666 594
Single Sided – Double Sided dimensions are the same
Dimensions
Power Consumption
240V AC 50HZ• 4W Quickfi t Lumatec Exit 7.6W
Construction
• Body Moulded ABS• Bracket Zinc Steel – White Powder Coated• Diffuser Moulded Acrylic
QUICKFIT® LUMATEC® COLDCATHODE 25,000HR EXIT
STANDARD AND THEATRE PICTOGRAPH
379.0 72.0
212.0
Exit InsertsLumatec Cold Cathode Standard Pictograph Quickfi ts® are supplied with all Pictograph insert options.For EXIT Insert Peel off Arrow, see below table:
Part No. Description29-E1-10 EXIT Insert Peel off Arrow 10 Pack
Technical Specifi cations
Photometrics & Luminaires SpacingsProduct Classification Mounting Height in Metres 2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.0PQFVR25KSS C0 E1.25 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0 C90 E1.25 4.2 4.2 4.0 3.6 4.0 3.0 PQFVR25KDS C0 E2.5 5.6 5.8 5.8 6.0 5.8 5.8 5.2 5.2 4.6 C90 E2.5 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0
Note Under AS2293.1-2005, exit signs shall be mounted not less than 2m and not more than 2.7m above fl oor level, or immediately above the doorway if the doorway is higher than 2.7m. However, variations to these heights shall be allowed when specifi cally agreed by the relevant regulatory authority.
19
Parts & Accessories
Part No. DescriptionBodiesMQFVR25KMQ-0010 Quickfi t Lumatec CC 25K no diffuser or back plateMQFVR25KMQ-0011 Quickfi t Lumatec CC 25K no diffuserPQFBVR25K-0010 Quickfi t T/Mask Lumatec CC 25K no diffuser or back plate PQFBVR25K-0011 Quickfi t T/Mask Lumatec CC 25K no diffuser
Diffusers31-PQFCC Quickfi t Lumatec CC Pictograph diffuser – includes PICTO insert31-PQFCC-B Quickfi t Lumatec CC Pictograph diffuser – no insert31-PQFT1 Quickfi t 10W theatre mask PICTO diffuser 31-PQFT2 Quickfi t 10W theatre mask <PICTO diffuser 31-PQFT3 Quickfi t 10W theatre mask PICTO> diffuser
Back plates31-MQBP Back plate to suit Quickfi t standard31-MQBPB Back plate to suit Quickfi t theatre
Wire guardsQFWGCM Quickfi t wire guard ceiling mountQFWGWM Quickfi t wire guard wall mount
Mounting Bracket03-02060 Ceiling bracket assembly white powder coated03-02061 Ceiling bracket assembly black powder coatedMQFCL Cantilever mounting bracket
LampsCCFL4-5 Lumatec 4W lamp to suit Cold Cathode Quickfi ts – pack of 5
Batteries03-01205 Battery 6 cell sub C to suit VR25K Quickfi ts
National Support CentrePh 1300 666 595 • Fax 1300 666 594
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
QUICKFIT® LUMATEC® COLDCATHODE 25,000HR EXIT
STANDARD AND THEATRE PICTOGRAPH
MQFCL Bracket
20
QUICKFIT® LUMATEC® COLDCATHODE 50,000HR EXIT
STANDARD AND THEATRE
The Quickfi t range of exits is Australia’s fi rst choice for quality signage. Featuring cold cathode technology, the Quickfi t Lumatec line up uses the only proven long life lamp in the Australian evacuation signage market. The Lumatec lamp is not only energy effi cient but only needs to be replaced every 50,000 hours. The Quickfi t also features a unique steel slide and connect bracket that provides strength, is compatible with all current and previous models for easy retrofi t and enables quick and easy maintenance. Only the Quickfi t bracket needs to be installed during fi tout, which can greatly reduce damage.
The Quickfi t is available in a complete range including Theatre Mask and Nexus models tocater for the entire project.
Features• Stanilite Lumatec® Cold Cathode 6 year rated lamp • BBEB electronic ballast technology • Advanced dual rate battery charger with high
temperature NiCad batteries • Universal wall/ceiling mounting • 24m viewing distance
Quickfi t Lumatec® Cold Cathode 50,000HR Standard
Part No. DescriptionMQFDR50KSS 4W Maintained Single Sided DR 50K HR Lamp, EXIT Insert Peel off ArrowMQFDR50KDS 4W Maintained Double Sided DR 50K HR Lamp, EXIT Insert Peel off Arrow
National Support CentrePh 1300 666 595 • Fax 1300 666 594
Quickfi t Lumatec® Cold Cathode 50,000HR Theatre Mask
MQFBDR50KMQT-1 4W Maintained T/Mask Single Sided DR 50K Hour Lamp, EXITMQFBDR50KMQT-2 4W Maintained T/Mask Single Sided DR 50K Hour Lamp <EXITMQFBDR50KMQT-3 4W Maintained T/Mask Single Sided DR 50K Hour Lamp EXIT>MQFBDR50KMQT-4 4W Maintained T/Mask Single Sided DR 50K Hour Lamp <EXIT>MQFBDR50KMQT-5 4W Maintained T/Mask Double Sided DR 50K Hour Lamp EXITMQFBDR50KMQT-6 4W Maintained T/Mask Double Sided DR 50K Hour Lamp AOW EXITMQFBDR50KMQT-7 4W Maintained T/Mask Double Sided DR 50K Hour Lamp <EXIT>
Note Theatre mask range does not use inserts. Theatre mask exits do not have an emergency classifi cation.
Quickfi t Lumatec® Cold Cathode 50,000HR Standard Nexus®
Part No. DescriptionMQFNXSDR50KSS Nexus 4W Maintained Single Sided DR 50K HR Lamp EXIT Insert Peel off ArrowMQFNXSDR50KDS Nexus 4W Maintained Double Sided DR 50K HR Lamp EXIT Insert Peel off Arrow
21
Quickfi t Lumatec® Cold Cathode 50,000HR Theatre Mask Nexus®
Part No. DescriptionMQFBNXSDR50KT-1 Nexus 4W Maintained T/Mask Single Sided DR 50K Hour Lamp, EXITMQFBNXSDR50KT-2 Nexus 4W Maintained T/Mask Single Sided DR 50K Hour Lamp, <EXITMQFBNXSDR50KT-3 Nexus 4W Maintained T/Mask Single Sided DR 50K Hour Lamp, EXIT>MQFBNXSDR50KT-4 Nexus 4W Maintained T/Mask Single Sided DR 50K Hour Lamp, <EXIT>MQFBNXSDR50KT-5 Nexus 4W Maintained T/Mask Double Sided DR 50K Hour Lamp, EXITMQFBNXSDR50KT-6 Nexus 4W Maintained T/Mask Double Sided DR 50K Hour Lamp, AOW EXITMQFBNXSDR50KT-7 Nexus 4W Maintained T/Mask Double Sided DR 50K Hour Lamp, <EXIT>
Note Theatre mask range does not use inserts. Theatre mask exits do not have an emergency classifi cation.
National Support CentrePh 1300 666 595 • Fax 1300 666 594
Single Sided – Double sided same dimensions
Technical Specifi cations
Photometrics & Luminaires SpacingsProduct Classification Mounting Height in Metres 2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.0MQFDR50KSS C0 E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0 C90 E1.25 4.2 4.2 4.0 3.6 4.0 3.0 MQFDR50KDS C0 E2.5 5.6 5.8 5.8 6.0 5.8 5.8 5.2 5.2 4.6 C90 E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0
*Nexus versions of the above have the same data
Note Under AS2293.1-2005, exit signs shall be mounted not less than 2m and not more than 2.7m above fl oor level, or immediately above the doorway if the doorway is higher than 2.7m. However, variations to these heights shall be allowed when specifi cally agreed by the relevant regulatory authority.
Dimensions
Power Consumption
240V AC 50HZ• 4W Quickfi t Lumatec Exit 6.6W• 4W Quickfi t Lumatec Nexus Exit 7.2W
Construction
• Body Moulded ABS• Bracket Zinc Steel – Powder Coated• Diffuser Moulded Acrylic
QUICKFIT® LUMATEC® COLDCATHODE 50,000HR EXIT
STANDARD AND THEATRE
379.0 72.0
212.0
22
Parts & Accessories
Part No. DescriptionBodiesMQFDR50KMQ-0010 Quickfi t Lumatec CC 50K Exit no diffuser or back plateMQFDR50KMQ-0011 Quickfi t Lumatec CC 50K Exit no diffuser MQFBDR50KMQT-10 Quickfi t 4W T/Mask Lumatec CC 50K no diffuser or back plateMQFBDR50KMQT-11 Quickfi t 4W T/Mask Lumatec CC 50K no diffuserMQFNXSD50KMQ-10 Quickfi t Lumatec CC 50K Nexus Exit no diffuser or back plate MQFNXSD50KMQ-11 Quickfi t Lumatec CC 50K Nexus Exit no diffuser MQFBNXSD50KT-10 Quickfi t Nexus 4W T/Mask Lumatec CC 50K no diffuser or back plateMQFBNXSD50KT-11 Quickfi t Nexus 4W T/Mask Lumatec CC 50K no diffuser
Diffusers31-MQPO Quickfi t Lumatec CC diffuser – EXIT Peel off Arrow31-MQ1 Quickfi t Lumatec CC diffuser – screened EXIT31-MQ2 Quickfi t Lumatec CC diffuser – screened <EXIT31-MQ3 Quickfi t Lumatec CC diffuser – screened EXIT>31-MQ4 Quickfi t Lumatec CC diffuser – screened <EXIT>31-MQ9 Quickfi t Lumatec CC opal diffuser – no insert31-MQ1-U Quickfi t Lumatec CC diffuser – EXIT up side down31-MQ2-U Quickfi t Lumatec CC diffuser – <EXIT up side down31-MQ3-U Quickfi t Lumatec CC diffuser – EXIT> up side down31-MQT1 Quickfi t Lumatec CC theatre mask diffuser – laser cut EXIT31-MQT2 Quickfi t Lumatec CC theatre mask diffuser – laser cut <EXIT31-MQT3 Quickfi t Lumatec CC theatre mask diffuser – laser cut EXIT>31-MQT4 Quickfi t Lumatec CC theatre mask diffuser – laser cut <EXIT>31-MQBF Breakfront diffuser single sided EXIT
Back Plates31-MQBP Back plate to suit Quickfi t standard31-MQBPB Back plate to suit Quickfi t theatre
Wire GuardsQFWGCM Quickfi t wire guard ceiling mountQFWGWM Quickfi t wire guard wall mount
Mounting Bracket03-02060 Ceiling bracket assembly white powder coated03-02061 Ceiling bracket assembly black powder coatedMQFCL Cantilever mounting bracket
Lamps CCFL4-5 Lumatec 4W lamp to suit Cold Cathode Quickfi ts – pack of 5
Batteries03-01205 Battery 6 cell sub C to suit DR50K Quickfi ts
Note 31-MQBF does not comply with Australian Standard AS2293
31-MQBF
National Support CentrePh 1300 666 595 • Fax 1300 666 594
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
QUICKFIT LUMATEC® COLDCATHODE 50,000HR EXIT
STANDARD AND THEATRE
MQFCL Bracket
23
QUICKFIT® LUMATEC® COLD CATHODE 25,000HR EXIT
STANDARD AND THEATRE
The Quickfi t range of exits is Australia’s fi rst choice for quality signage. Featuring cold cathode technology, the Quickfi t Lumatec line up uses the only proven long life lamp in the Australian evacuation signage market. The Lumatec lamp is not only energy effi cient but only needs to be replaced every 25,000 hours. The Quickfi t also features a unique steel slide and connect bracket that provides strength, is compatible with all current and previous models for easy retrofi t and enables quick and easy maintenance. Only the Quickfi t bracket needs to be installed during fi tout, which can greatly reduce damage.The Quickfi t is available in a complete rangeincluding Theatre Mask and Nexus models to caterfor the entire project.
Features• Stanilite Lumatec® cold cathode 3 year rated lamp • BBEB electronic ballast technology • Advanced dual rate battery charger with high
temperature NiCad batteries • Universal wall/ceiling mounting • 24M viewing distance
Quickfi t Lumatec® Cold Cathode 25,000HR StandardPart No. DescriptionMQFVR25KSS 4W Maintained, Single Sided VR 25K Hour Lamp, EXIT Insert Peel of ArrowMQFVR25KDS 4W Maintained, Double Sided VR 25K Hour Lamp, EXIT Insert Peel of Arrow
Quickfi t Lumatec® Cold Cathode 25,000HR Theatre MaskMQFBVR25KMQT-1 4W Maintained T/Mask Single Sided VR 25K Hour Lamp, EXITMQFBVR25KMQT-2 4W Maintained T/Mask Single Sided VR 25K Hour Lamp, <EXITMQFBVR25KMQT-3 4W Maintained T/Mask Single Sided VR 25K Hour Lamp EXIT>MQFBVR25KMQT-4 4W Maintained T/Mask Single Sided VR 25K Hour Lamp <EXIT>MQFBVR25KMQT-5 4W Maintained T/Mask Double Sided VR 25K Hour Lamp EXITMQFBVR25KMQT-6 4W Maintained T/Mask Double Sided VR 25K Hour Lamp AOW EXITMQFBVR25KMQT-7 4W Maintained T/Mask Double Sided VR 25K Hour Lamp <EXIT>
Note Theatre mask range does not use inserts. Theatre mask exits do not have an emergency classifi cation.
Technical Specifi cationsPhotometrics & Luminaires SpacingsProduct Classification Mounting Height In Metres 2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.0MQFVR25KSS C0 E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0 C90 E1.25 4.2 4.2 4.0 3.6 4.0 3.0 MQFVR25KDS C0 E2.5 5.6 5.8 5.8 6.0 5.8 5.8 5.2 5.2 4.6 C90 E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0
Note Under AS2293.1-2005, exit signs shall be mounted not less than 2m and not more than 2.7m above fl oor level, or immediately above the doorway if the doorway is higher than 2.7m. However, variations to these heights shall be allowed when specifi cally agreed by the relevant regulatory authority.
National Support CentrePh 1300 666 595 • Fax 1300 666 594
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
National Support CentrePh 1300 666 595 • Fax 1300 666 594 24
Parts & AccessoriesPart No. DescriptionBodies MQFVR25KMQ-0010 Quickfi t Lumatec CC 25K Exit no diffuser or back plateMQFVR25KMQ-0011 Quickfi t Lumatec CC 25K Exit no diffuserMQFBVR25KMQT-10 Quickfi t T/Mask Lumatec CC 25K no diffuser or back plateMQFBVR25KMQT-11 Quickfi t T/Mask Lumatec CC 25K no diffuserDiffusers & Back Plates31-MQPO Quickfi t Lumatec CC diffuser – EXIT Peel off Arrow 31-MQ1 Quickfi t Lumatec CC diffuser – screened EXIT 31-MQ2 Quickfi t Lumatec CC diffuser – screened <EXIT31-MQ3 Quickfi t Lumatec CC diffuser – screened EXIT>31-MQ4 Quickfi t Lumatec CC diffuser – screened <EXIT>31-MQ9 Quickfi t Lumatec CC opal diffuser – no insert31-MQ1-U Quickfi t Lumatec CC diffuser – EXIT up side down31-MQ2-U Quickfi t Lumatec CC diffuser – <EXIT up side down31-MQ3-U Quickfi t Lumatec CC diffuser – EXIT> up side down31-MQT1 Quickfi t Lumatec CC theatre mask diffuser – laser cut EXIT31-MQT2 Quickfi t Lumatec CC theatre mask diffuser – laser cut <EXIT31-MQT3 Quickfi t Lumatec CC theatre mask diffuser – laser cut EXIT>31-MQT4 Quickfi t Lumatec CC theatre mask diffuser – laser cut <EXIT>31-MQBF Breakfront diffuser single sided EXIT31-MQBP Back plate to suit Quickfi t standard31-MQBPB Back plate to suit Quickfi t theatreWire GuardsQFWGCM Quickfi t wire guard ceiling mountQFWGWM Quickfi t wire guard wall mountMounting Bracket03-02060 Ceiling bracket assembly white powder coated03-02061 Ceiling bracket assembly black powder coatedMQFCL Cantilever mounting bracketLamps & BatteriesCCFL4-5 Lumatec 4W lamp to suit Cold Cathode Quickfi ts – pack of 503-01205 Battery 6 cell sub C to suit VR25K Quickfi ts
Single Sided - Double sided are the same dimensions
Dimensions
Power Consumption
240V AC 50HZ• 4W Quickfi t Lumatec Exit 7.6W
Construction
• Body Moulded ABS• Bracket Zinc Steel – Powder Coated• Diffuser Moulded Acrylic
QUICKFIT® LUMATEC® COLD CATHODE 25,000HR EXIT
STANDARD AND THEATRE
MQFCL Bracket
31-MQBF
379.0 72.0
212.0
25National Support CentrePh 1300 666 595 • Fax 1300 666 594
The Stanilite® Weatherproof Quickfi t® Exits provide a unique weatherproof solution using the standard Quickfi t® combined with a specially designed vandal resistant enclosure. The Weatherproof Quickfi ts® are suitable for many industrial and commercial applications with an IP65 rating. Exits can be wall or ceiling mounted.
Features
• Available in either electronic ballast 10W or Lumatec® cold cathode 6 year rated lamp
• UV stabilised polycarbonate cover or hi-impact chemical resistant acrylic cover options
• Optional steel bracket for wall mounting• Cantilever mounting option available• Viewing distance 24m
QUICKFIT®
WEATHERPROOFEXITS – PICTOGRAPH
Quickfi t® 10W Weatherproof - Pictograph
Part No. DescriptionPWQF110MA-1 1x10W Maintained Single Sided Acrylic Cover PICTOPWQF110MA-2 1x10W Maintained Single Sided Acrylic Cover <PICTOPWQF110MA-3 1x10W Maintained Single Sided Acrylic Cover PICTO>PWQF110MA-5 1x10W Maintained Double Sided Acrylic Cover PICTO PWQF110MA-6 1x10W Maintained Double Sided Acrylic Cover AOW PICTO PWQF210SA-1 2x10W Sustained Single Sided Acrylic Cover PICTO PWQF210SA-2 2x10W Sustained Single Sided Acrylic Cover <PICTOPWQF210SA-3 2x10W Sustained Single Sided Acrylic Cover PICTO>PWQF210SA-5 2x10W Sustained Double Sided Acrylic Cover PICTOPWQF210SA-6 2x10W Sustained Double Sided Acrylic Cover AOW PICTO
Note for polycarbonate cover, change “A” to “P” in the part number when ordering eg PWQF110MP-1
Quickfi t® Lumatec® Cold Cathode 50,000HR Weatherproof - Pictograph
PWQFDR50KA-1 4W Maintained Single Sided DR 50K Hour Lamp Acrylic Cover PICTO PWQFDR50KA-2 4W Maintained Single Sided DR 50K Hour Lamp Acrylic Cover <PICTOPWQFDR50KA-3 4W Maintained Single Sided DR 50K Hour Lamp Acrylic Cover PICTO>PWQFDR50KA-5 4W Maintained Double Sided DR 50K Hour Lamp Acrylic Cover PICTOPWQFDR50KA-6 4W Maintained Double Sided DR 50K Hour Lamp Acrylic Cover AOW PICTO
Note for polycarbonate cover, change “A” to “P” in the part number when ordering eg PWQFDR50KP-1
26National Support CentrePh 1300 666 595 • Fax 1300 666 594
QUICKFIT®
WEATHERPROOFEXITS – PICTOGRAPH
PICTO <PICTO PICTO> Straight from here Left from here Right from here
Quickfi t® Lumatec® Cold Cathode 50,000HR Nexus® Weatherproof - Pictograph
PWQFNXSDR50KA-1 Nexus 4W Maintained Single Sided DR 50K Hour Lamp Acrylic Cover PICTO PWQFNXSDR50KA-2 Nexus 4W Maintained Single Sided DR 50K Hour Lamp Acrylic Cover <PICTOPWQFNXSDR50KA-3 Nexus 4W Maintained Single Sided DR 50K Hour Lamp Acrylic Cover PICTO>PWQFNXSDR50KA-5 Nexus 4W Maintained Double Sided DR 50K Hour Lamp Acrylic Cover PICTOPWQFNXSDR50KA-6 Nexus 4W Maintained Double Sided DR 50K Hour Lamp Acrylic Cover AOW PICTO
Note for polycarbonate cover, change “A” to “P” in the part number when ordering eg PWQFNXSDR50KP-1
Quickfi t® 10W Nexus® Weatherproof - Pictograph
Part No. DescriptionPWQFNXS110MA-1 Nexus 1x10W Maintained Single Sided Acrylic Cover PICTOPWQFNXS110MA-2 Nexus 1x10W Maintained Single Sided Acrylic Cover <PICTOPWQFNXS110MA-3 Nexus 1x10W Maintained Single Sided Acrylic Cover PICTO>PWQFNXS110MA-5 Nexus 1x10W Maintained Double Sided Acrylic Cover PICTOPWQFNXS110MA-6 Nexus 1x10W Maintained Double Sided Acrylic Cover AOW PICTOPWQFNXS210SA-1 Nexus 2x10W Sustained Single Sided Acrylic Cover PICTOPWQFNXS210SA-2 Nexus 2x10W Sustained Single Sided Acrylic Cover <PICTOPWQFNXS210SA-3 Nexus 2x10W Sustained Single Sided Acrylic Cover PICTO>PWQFNXS210SA-5 Nexus 2x10W Sustained Double Sided Acrylic Cover PICTOPWQFNXS210SA-6 Nexus 2x10W Sustained Double Sided Acrylic Cover AOW PICTO
Note for polycarbonate cover, change “A” to “P” in the part number when ordering eg PWQFNXS110MP-1
27National Support CentrePh 1300 666 595 • Fax 1300 666 594
Power Consumption
240V AC 50HZ• 10W Quickfi t Weatherproof Exit 9.2W• 10W Quickfi t Weatherproof Nexus Exit 9.5W• 4W Quickfi t Lumatec Weatherproof Exit 6.6W• 4W Quickfi t Lumatec W/proof Nexus Exit 7.2W
Construction
• Body Moulded ABS• Bracket Zinc Steel – White Powder Coated• Diffuser Moulded Acrylic• Enclosure Vandal Resistant Polycarbonate
Cover or Hi-Impact Chemical Resistant Acrylic options
• Base Black GRPDimensions
Mounting Options
274.0
466.0
Cantilever Wall Mount,Heavy Duty Bracket (WQFCLH)
Cantilever Wall Mount(WQFCLL)
Wall Mount(WQFWM)
Cantilever Flag Pole
Technical Specifi cations
Photometrics & Luminaires SpacingsProduct Classifi cation Mounting Height in Metres 2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.0PWQF110M C0 E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0 C90 E1.6 4.8 4.8 4.8 4.4 4.0 4.2 3.8 PWQF210S C0 E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0 C90 E1.6 4.8 4.8 4.8 4.4 4.0 4.2 3.8 PWQFDR50K C0 E1.25 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0 Single Sided C90 E1.25 4.2 4.2 4.0 3.6 4.0 3.0 PWQFDR50K C0 E2.5 5.6 5.8 5.8 6.0 5.8 5.8 5.2 5.2 4.6 Double Sided C90 E2.5 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0
* Nexus versions of the above have the same data Note Under AS2293.1-2005, exit signs shall be mounted not less than 2m and not more than 2.7m above fl oor level, or immediately above the doorway if the doorway is higher than 2.7m. However, variations to these heights shall be allowed when specifi cally agreed by the relevant regulatory authority.
QUICKFIT®
WEATHERPROOFEXITS – PICTOGRAPH
24.0
34.0
466.0
282.0
274.
0
240.0
90.0
155.0
24.0
140.
0
153.
0
28National Support CentrePh 1300 666 595 • Fax 1300 666 594
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
WQFWM, WQFCLH, WQFCLLNote All bracket options are
supplied with hardware for fi xingbrackets to the base
QUICKFIT®
WEATHERPROOFEXITS – PICTOGRAPH
Parts & Accessories
Part No. DescriptionDiffusers31-MQD1P Quickfi t Weatherproof PICTO diffuser “straight from here”31-MQD2P Quickfi t Weatherproof <PICTO diffuser “left from here”31-MQD3P Quickfi t Weatherproof PICTO> diffuser “right from here”
Back Plates31-MQBPB Back plate to suit Quickfi t Weatherproof
Weatherproof Enclosures02-WQFEA Quickfi t Weatherproof enclosure acrylic diffuser02-WQFEP Quickfi t Weatherproof enclosure polycarbonate diffuser
Mounting Bracket03-02061 Ceiling bracket assembly black powder coatedWQFCLH Cantilever mounting bracket – heavy dutyWQFCLL Cantilever mounting bracket – light dutyWQFWM Wall mount bracket
Lamps15-00215 Lamp to suit Quickfi t 10W WeatherproofsCCFL4-5 Lumatec 4W lamp to suit Cold Cathode Quickfi ts – pack of 5
Batteries03-01205 Battery 6 cell sub C to suit Quickfi t Weatherproofs
29National Support CentrePh 1300 666 595 • Fax 1300 666 594
The Stanilite® Weatherproof Quickfi t® Exits provide a unique weatherproof solution using the standard Quickfi t® combined with a specially designed vandal resistant enclosure. The Weatherproof Quickfi ts are suitable for many industrial and commercial applications with an IP65 rating. Exits can be wall or ceiling mounted.Features• Available in either electronic ballast 10W or Lumatec®
cold cathode 6 year rated lamp• UV stabilised polycarbonate cover or hi-impact
chemical resistant acrylic cover options• Optional steel bracket for wall mounting• Cantilever mounting option available• Viewing distance 24m
Quickfi t® 10W Weatherproof
Part No. DescriptionWQF110MA-1 1x10W Maintained Single Sided Acrylic Cover EXITWQF110MA-2 1x10W Maintained Single Sided Acrylic Cover <EXITWQF110MA-3 1x10W Maintained Single Sided Acrylic Cover EXIT>WQF110MA-4 1x10W Maintained Single Sided Acrylic Cover <EXIT>WQF110MA-5 1x10W Maintained Double Sided Acrylic Cover EXIT WQF110MA-6 1x10W Maintained Double Sided Acrylic Cover AOW EXITWQF110MA-7 1x10W Maintained Double Sided Acrylic Cover <EXIT>WQF210SA-1 2x10W Sustained Single Sided Acrylic Cover EXIT WQF210SA-2 2x10W Sustained Single Sided Acrylic Cover <EXITWQF210SA-3 2x10W Sustained Single Sided Acrylic Cover EXIT>WQF210SA-4 2x10W Sustained Single Sided Acrylic Cover <EXIT>WQF210SA-5 2x10W Sustained Double Sided Acrylic Cover EXIT WQF210SA-6 2x10W Sustained Double Sided Acrylic Cover AOW EXIT WQF210SA-7 2x10W Sustained Double Sided Acrylic Cover <EXIT>
Note for polycarbonate cover, change “A” to “P” in the part number when ordering eg WQF110MP-1
QUICKFIT®
WEATHERPROOF EXITS
Quickfi t Lumatec® Cold Cathode 50,000HR Weatherproof
WQFDR50KA-1 4W Maintained Single Sided DR 50K Hour Lamp Acrylic Cover EXITWQFDR50KA-2 4W Maintained Single Sided DR 50K Hour Lamp Acrylic Cover <EXITWQFDR50KA-3 4W Maintained Single Sided DR 50K Hour Lamp Acrylic Cover EXIT>WQFDR50KA-4 4W Maintained Single Sided DR 50K Hour Lamp Acrylic Cover <EXIT>WQFDR50KA-5 4W Maintained Double Sided DR 50K Hour Lamp Acrylic Cover EXIT WQFDR50KA-6 4W Maintained Double Sided DR 50K Hour Lamp Acrylic Cover AOW EXITWQFDR50KA-7 4W Maintained Double Sided DR 50K Hour Lamp Acrylic Cover <EXIT>
Note for polycarbonate cover, change “A” to “P” in the part number when ordering eg WQFDR50KP-1
30National Support CentrePh 1300 666 595 • Fax 1300 666 594
QUICKFIT®
WEATHERPROOF EXITS
Quickfi t® 10W Weatherproof Nexus®
Part No. DescriptionWQFNXS110MA-1 Nexus 1x10W Maintained Single Sided Acrylic Cover EXITWQFNXS110MA-2 Nexus 1x10W Maintained Single Sided Acrylic Cover <EXITWQFNXS110MA-3 Nexus 1x10W Maintained Single Sided Acrylic Cover EXIT>WQFNXS110MA-4 Nexus 1x10W Maintained Single Sided Acrylic Cover <EXIT>WQFNXS110MA-5 Nexus 1x10W Maintained Double Sided Acrylic Cover EXIT WQFNXS110MA-6 Nexus 1x10W Maintained Double Sided Acrylic Cover AOW EXIT WQFNXS110MA-7 Nexus 1x10W Maintained Double Sided Acrylic Cover <EXIT>WQFNXS210SA-1 Nexus 2x10W Sustained Single Sided Acrylic Cover EXITWQFNXS210SA-2 Nexus 2x10W Sustained Single Sided Acrylic Cover <EXITWQFNXS210SA-3 Nexus 2x10W Sustained Single Sided Acrylic Cover EXIT>WQFNXS210SA-4 Nexus 2x10W Sustained Single Sided Acrylic Cover <EXIT>WQFNXS210SA-5 Nexus 2x10W Sustained Double Sided Acrylic Cover EXITWQFNXS210SA-6 Nexus 2x10W Sustained Double Sided Acrylic Cover AOW EXITWQFNXS210SA-7 Nexus 2x10W Sustained Double Sided Acrylic Cover <EXIT>
Note for polycarbonate cover, change “A” to “P” in the part number when ordering eg WQFNXS110MP-1
Quickfi t Lumatec® Cold Cathode Weatherproof Nexus®
WQFNXSDR50KA-1 Nexus 4W Maintained Single Sided DR 50K Hour Lamp Acrylic Cover EXITWQFNXSDR50KA-2 Nexus 4W Maintained Single Sided DR 50K Hour Lamp Acrylic Cover <EXITWQFNXSDR50KA-3 Nexus 4W Maintained Single Sided DR 50K Hour Lamp Acrylic Cover EXIT>WQFNXSDR50KA-4 Nexus 4W Maintained Single Sided DR 50K Hour Lamp Acrylic Cover <EXIT>WQFNXSDR50KA-5 Nexus 4W Maintained Double Sided DR 50K Hour Lamp Acrylic Cover EXITWQFNXSDR50KA-6 Nexus 4W Maintained Double Sided DR 50K Hour Lamp Acrylic Cover AOW EXITWQFNXSDR50KA-7 Nexus 4W Maintained Double Sided DR 50K Hour Lamp Acrylic Cover <EXIT>
Note for polycarbonate cover, change “A” to “P” in the part number when ordering eg WQFNXSDR50KP-1
31National Support CentrePh 1300 666 595 • Fax 1300 666 594
QUICKFIT®
WEATHERPROOF EXITS
274.0
466.0
Dimensions
Power Consumption
240V AC 50HZ• 10W Quickfi t Weatherproof Exit 9.2W• 10W Quickfi t Weatherproof Nexus Exit 9.5W• 4W Quickfi t Lumatec Weatherproof Exit 6.6W• 4W Quickfi t Lumatec W/proof Nexus Exit 7.2W
Construction
• Body Moulded ABS• Bracket Zinc Steel –White Powder Coated• Diffuser Moulded Acrylic• Enclosure Vandal Resistant Polycarbonate or
Cover Hi-Impact Chemical Resistant Acrylic option
• Base Black GRP
24.0
Technical Specifi cations
Photometrics & Luminaires SpacingsProduct Classification Mounting Height in Metres 2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.0WQF110M C0 E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0 C90 E1.6 4.8 4.8 4.8 4.4 4.0 4.2 3.8WQF210S C0 E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0 C90 E1.6 4.8 4.8 4.8 4.4 4.0 4.2 3.8WQFDR50K C0 E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0 Single Sided C90 E1.25 4.2 4.2 4.0 3.6 4.0 3.0 WQFDR50K C0 E2.5 5.6 5.8 5.8 6.0 5.8 5.8 5.2 5.2 4.6 Double Sided C90 E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0
*Nexus versions of the above have the same data
Note Under AS2293.1-2005, exit signs shall be mounted not less than 2m and not more than 2.7m above fl oor level, or immediately above the doorway if the doorway is higher than 2.7m. However, variations to these heights shall be allowed when specifi cally agreed by the relevant regulatory authority.
466.0
274.
0
240.0
282.0
155.0
90.0
24.0
34.0
32National Support CentrePh 1300 666 595 • Fax 1300 666 594
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
QUICKFIT®
WEATHERPROOF EXITS
Mounting Options
WQFWM, WQFCLH, WQFCLL
Note All bracket options are supplied with hardware for fi xing
brackets to the base
Cantilever Wall Mount,Heavy Duty Bracket (WQFCLH)
Cantilever Wall Mount(WQFCLL)
Wall Mount(WQFWM)
Cantilever Flag Pole
153.
0
140.
0
Parts & Accessories
Part No. DescriptionDiffusers31-MQD1 Quickfi t Weatherproof EXIT diffuser31-MQD2 Quickfi t Weatherproof <EXIT diffuser31-MQD3 Quickfi t Weatherproof EXIT> diffuser31-MQD4 Quickfi t Weatherproof <EXIT> diffuser
Back Plates31-MQBPB Back plate to suit Quickfi t Weatherproof
Weatherproof Enclosures02-WQFEA Quickfi t Weatherproof enclosure acrylic diffuser02-WQFEP Quickfi t Weatherproof enclosure polycarbonate diffuser
Mounting Bracket03-02061 Ceiling bracket assembly black powder coatedWQFCLH Cantilever mounting bracket – heavy dutyWQFCLL Cantilever mounting bracket – light dutyWQFWM Wall mount bracket
Lamps15-00215 Lamp to suit Quickfi t 10W WeatherproofsCCFL4-5 Lumatec 4W lamp to suit Cold Cathode Quickfi ts – pack of 5
Batteries03-01205 Battery 6 cell sub C to suit Quickfi t Weatherproofs
33National Support CentrePh 1300 666 595 • Fax 1300 666 594
QUICKFIT® 18W EXITSPICTOGRAPH
The Stanilite Quickfi t® 18W Range of PICTO Exits provides a premium quality exit for use in many commercial and industrial applications where conventional sized exits do not provide adequate coverage. Featuring a larger Quickfi t® slide & connect mounting bracket enabling the fi tting to be installed on the wall or ceiling with the same diffusers. The power socket in the bracket uses large 16mm power terminals enabling a TPS junction at the bracket, all covered by a full length protective mains cover.
Features:
• Universal wall or ceiling mount • Hi-temperature NiCad batteries• Viewing distance 24m
PICTO <PICTO PICTO> Straight from here Left from here Right from here
Quickfi t® 18W Standard - Pictograph
Part No. DescriptionPQF218SQL-0001 2x18W Sustained Single Sided PICTOPQF218SQL-0002 2x18W Sustained Single Sided <PICTOPQF218SQL-0003 2x18W Sustained Single Sided PICTO>PQF218SQL-0005 2x18W Sustained Double Sided PICTOPQF218SQL-0006 2x18W Sustained Double Sided AOW PICTO
Note Lamps not included
Quickfi t® 18W Standard Nexus® - Pictograph
PQFNXS218SQL-1 Nexus 2x18W Sustained Single Sided PICTOPQFNXS218SQL-2 Nexus 2x18W Sustained Single Sided <PICTOPQFNXS218SQL-3 Nexus 2x18W Sustained Single Sided PICTO>PQFNXS218SQL-5 Nexus 2x18W Sustained Double Sided PICTOPQFNXS218SQL-6 Nexus 2x18W Sustained Double Sided AOW PICTO
Note Lamps not included
34National Support CentrePh 1300 666 595 • Fax 1300 666 594
QUICKFIT® 18W EXITSPICTOGRAPH
Technical Specifi cations
Photometrics & Luminaires SpacingsProduct Classification Mounting Height in Metres 2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.0PQFNXS218SQL C0 E2.5 5.6 5.8 5.8 6.0 5.8 5.8 5.2 5.2 4.6 C90 E2.0 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0
Note Under AS2293.1-2005, exit signs shall be mounted not less than 2m and not more than 2.7m above fl oor level, or immediately above the doorway if the doorway is higher than 2.7m. However, variations to these heights shall be allowed when specifi cally agreed by the relevant regulatory authority.
Dimensions
Power Consumption
240V AC 50HZ• 18W Quickfi t Standard & Nexus Exit 33W
Construction
• Body End Caps Moulded ABS • Extrusion Powder Coated Aluminium • Bracket Zinc Steel – White Powder Coated • Diffuser Moulded Acrylic
636.086.072.0
218.0
Standard 18W Exit
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Parts & Accessories
Part No. DescriptionBodies PQF218SQL-0010 Quickfi t 2x18W no diffuser or back platePQF218SQL-0011 Quickfi t 2x18W no diffuserPQFNXS218SQL-10 Quickfi t 2x18W no diffuser or back platePQFNXS218SQL-11 Quickfi t 2x18W no diffuser
Diffusers31-PQL1 Quickfi t 18W Standard diffuser PICTO31-PQL2 Quickfi t 18W Standard diffuser <PICTO31-PQL3 Quickfi t 18W Standard diffuser PICTO>
Back Plate21-00851 Back plate to suit Quickfi t 18W Standard Pictograph
Wire Guard21-01291 Wire guard to suit Quickfi t 18W Standard Pictograph
Lamps & Battery15-00227 Lamp to suit Quickfi t 18W fi ttings03-00999 Battery 3 cell sub D to suit Quickfi t 18W fi ttings
636.0 72.0
218.
0
86.0
35National Support CentrePh 1300 666 595 • Fax 1300 666 594
The Stanilite Quickfi t® 18W Jumbo Range of Exits provides a premium quality exit for use in many commercial and industrial applications where conventional sized exits do not provide adequate coverage. Featuring a larger Quickfi t® slide & connect mounting bracket enabling the fi tting to be installed on the wall or ceiling with the same diffusers. The power socket in the bracket uses large 16mm power terminals enabling a TPS junction at the bracket, all covered by a full length protective mains cover.
Features
• AC models available• Universal wall or ceiling mount • Hi temperature NiCad batteries• Viewing distance 32m
Quickfi t® 18W Standard Jumbo – Pictograph
Part No. DescriptionPQFJ218SQJ-0001 2x18W Sustained Jumbo Single Sided PICTOPQFJ218SQJ-0002 2x18W Sustained Jumbo Single Sided <PICTOPQFJ218SQJ-0003 2x18W Sustained Jumbo Single Sided PICTO>PQFJ218SQJ-0005 2x18W Sustained Jumbo Double Sided PICTOPQFJ218SQJ-0006 2x18W Sustained Jumbo Double Sided AOW PICTOPQFJ218SQJ-0009 2x18W Sustained Jumbo Single Sided Opal Diffuser
Note Lamps not included
Quickfi t® 18W Standard Nexus® Jumbo – Pictograph
PQFJNXS218SQJ-1 Nexus 2x18W Sustained Jumbo Single Sided PICTOPQFJNXS218SQJ-2 Nexus 2x18W Sustained Jumbo Single Sided <PICTOPQFJNXS218SQJ-3 Nexus 2x18W Sustained Jumbo Single Sided PICTO>PQFJNXS218SQJ-5 Nexus 2x18W Sustained Jumbo Double Sided PICTOPQFJNXS218SQJ-6 Nexus 2x18W Sustained Jumbo Double Sided AOW PICTOPQFJNXS218SQJ-9 Nexus 2x18W Sustained Jumbo Single Sided Opal Diffuser
Note Lamps not included
QUICKFIT® 18W JUMBOEXITS – PICTOGRAPH
36National Support CentrePh 1300 666 595 • Fax 1300 666 594
Technical Specifi cations
Photometrics & Luminaires SpacingsProduct Classification Mounting Height in Metres 2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.0PQFJ218SQJ C0 E1.25 4.2 4.2 4.0 3.6 4.0 3.0 C90 E1.25 3.8 3.6 3.2 3.6
Note Under AS2293.1-2005, exit signs shall be mounted not less than 2m and not more than 2.7m above fl oor level, or immediately above the doorway if the doorway is higher than 2.7m. However, variations to these heights shall be allowed when specifi cally agreed by the relevant regulatory authority.
PICTO <PICTO PICTO> Straight from here Left from here Right from here
Power Consumption
240V AC 50HZ• 18W Quickfi t Jumbo Standard & Nexus Exit 33W
Construction
• Body Moulded ABS• Bracket Zinc Steel – Powder Coated• Diffuser Moulded Acrylic
Single Sided Double Sided
Dimensions95.0
72.0636.0
305.0
QUICKFIT® 18W JUMBOEXITS – PICTOGRAPH
636.0 72.0
305.
0
95.0
305.
0
636.0
72.0
122.0
37National Support CentrePh 1300 666 595 • Fax 1300 666 594
Parts & Accessories
Part No. DescriptionBodiesPQFJ218SQJ-0010 2x18W Sustained Jumbo no diffuser or back platePQFJ218SQJ-0011 2x18W Sustained Jumbo no diffuserPQFJNXS218SJ-10 2x18W Nexus Sustained Jumbo no diffuser or back platePQFJNXS218SJ-11 2x18W Nexus Sustained Jumbo no diffuser
Diffusers31-PQJ1 Quickfi t 18W Jumbo Pictograph diffuser PICTO 31-PQJ2 Quickfi t 18W Jumbo Pictograph diffuser <PICTO 31-PQJ3 Quickfi t 18W Jumbo Pictograph diffuser PICTO> 21-00811 Quickfi t 18W Jumbo Pictograph opal diffuser
Back Plates26-00035 Back plate to suit Quickfi t 18W Jumbo
Mounting Bracket03-02062 Ceiling bracket assembly to suit Quickfi t 18W Jumbo
Lamps 15-00227 Lamp to suit Quickfi t 18W Jumbo
Batteries03-00999 Battery 3 cell sub D to suit Quickfi t 18W Jumbo
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
QUICKFIT® 18W JUMBOEXITS – PICTOGRAPH
38National Support CentrePh 1300 666 595 • Fax 1300 666 594
QUICKFIT® 18W EXITS
The Stanilite Quickfi t® 18W Range of Exits provides a premium quality exit for use in many commercial and industrial applications where conventional sized exits do not provide adequate coverage. Featuring a larger Quickfi t® slide & connect mounting bracket enabling the fi tting to be installed on the wall or ceiling with the same diffusers. The power socket in the bracket uses large 16mm power terminals enabling a TPS junction at the bracket, all covered by a full length protective mains cover. Features• 18W standard and jumbo sizes • Universal wall or ceiling mount • Hi temperature NiCad batteries• Standard viewing distance from 24m to 36m
Quickfi t® Standard 18W – 24m Viewing Distance
Part No. DescriptionQF218SQL-0001 2x18W Sustained Single Sided EXITQF218SQL-0002 2x18W Sustained Single Sided <EXITQF218SQL-0003 2x18W Sustained Single Sided EXIT>QF218SQL-0004 2x18W Sustained Single Sided <EXIT>QF218SQL-0005 2x18W Sustained Double Sided EXITQF218SQL-0006 2x18W Sustained Double Sided AOW EXITQF218SQL-0007 2x18W Sustained Double Sided <EXIT>QF218SQL-0008 2x18W Sustained Single Sided Prismatic Diffuser QF218SQL-0009 2x18W Sustained Single Sided Opal Diffuser
Note Lamps not included
Quickfi t® Jumbo 18W – 36m Viewing Distance
QFJ218SQJ-0001 2x18W Sustained Jumbo Single Sided EXITQFJ218SQJ-0005 2x18W Sustained Jumbo Double Sided AOW EXITQFJ218SQJ-0009 2x18W Sustained Jumbo Single Sided Opal Diffuser
Note Lamps not included
Quickfi t® Non Maintained 18W – 24m Viewing Distance
QF118NQL-0008 1x18W Non Maintained Single Sided Prismatic DiffuserQF118NQL-0009 1x18W Non Maintained Single Sided Opal Diffuser
Note Lamps not included
39National Support CentrePh 1300 666 595 • Fax 1300 666 594
QUICKFIT® 18W EXITS
Quickfi t® 18W Standard Nexus® – 24m Viewing Distance
Part No. DescriptionQFNXS218SQL-1 Nexus 2x18W Sustained Single Sided EXITQFNXS218SQL-2 Nexus 2x18W Sustained Single Sided <EXITQFNXS218SQL-3 Nexus 2x18W Sustained Single Sided EXIT>QFNXS218SQL-4 Nexus 2x18W Sustained Single Sided <EXIT>QFNXS218SQL-5 Nexus 2x18W Sustained Double Sided EXITQFNXS218SQL-6 Nexus 2x18W Sustained Double Sided AOW EXITQFNXS218SQL-7 Nexus 2x18W Sustained Double Sided <EXIT>QFNXS218SQL-8 Nexus 2x18W Sustained Single Sided Prismatic DiffuserQFNXS218SQL-9 Nexus 2x18W Sustained Single Sided Opal DiffuserQFNXS118NQL-8 Nexus 1x18W Non Maintained Single Sided Prismatic DiffuserQFNXS118NQL-9 Nexus 1x18W Non Maintained Single Sided Opal Diffuser
Note Lamps not included
Quickfi t® 18W Jumbo Nexus® – 36m Viewing Distance
QFJNXS218SQJ-1 Nexus 2x18W Sustained Jumbo Single Sided Peel-Off Arrow EXITQFJNXS218SQJ-5 Nexus 2x18W Sustained Jumbo Double Sided Peel-Off Arrow EXITQFJNXS218SQJ-9 Nexus 2x18W Sustained Jumbo Single Sided Opal Diffuser
Note Lamps not included
Technical Specifi cations
Photometrics & Luminaires Spacings
Product Classification Mounting Height in Metres 2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.0QF218SQL C0 E1.25 4.2 4.2 4.0 3.6 4.0 3.0 QFJ218SQJ C90 E1.0 3.8 3.6 3.2 3.6 QF118NQL-0008 C0 C32 10.0 10.7 11.3 11.8 12.3 12.8 13.4 14.0 14.5 15.4 C90 C40 10.6 11.3 12.0 12.6 13.1 13.6 14.3 15.0 15.6 16.6QF118NQL-0009 C0 C32 10.0 10.7 11.3 11.8 12.3 12.8 13.4 14.0 14.5 15.4 C90 C40 10.6 11.3 12.0 12.6 13.1 13.6 14.3 15.0 15.6 16.6QFNXS218SQL C0 E2.5 5.6 5.8 5.8 6.0 5.8 5.8 5.2 5.2 4.6 C90 E2.0 5.2 5.2 5.4 5.2 5.0 4.6 4.8 4.0QFJNXS218SQJ C0 E1.25 4.2 4.2 4.0 3.6 4.0 3.0 C90 E1.25 4.2 4.2 4.0 3.6 4.0 3.0
Note Under AS2293.1-2005, exit signs shall be mounted not less than 2m and not more than 2.7m above fl oor level, or immediately above the doorway if the doorway is higher than 2.7m. However, variations to these heights shall be allowed when specifi cally agreed by the relevant regulatory authority.
40National Support CentrePh 1300 666 595 • Fax 1300 666 594
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
636.086.072.0
218.0
Standard 18W Exit Jumbo 18W Exit
Dimensions
Power Consumption
240V AC 50HZ• 18W Quickfi t Standard & Jumbo Exit 33W• 18W Quickfi t Standard & Jumbo Nexus Exit 33W
Construction
• Body End Caps Moulded ABSExtrusion Powder Coated Aluminium
• Bracket Zinc Steel – White Powder Coated• Diffuser Moulded Acrylic
QUICKFIT® 18W EXITS
636.0 72.0
218.
0
86.0
72.0
95.0
306.
0
636.0
Parts & Accessories
Part No. DescriptionBodiesQF218SQL-0011 Quickfi t 2x18W no diffuserQFJ218SQJ-0010 Quickfi t 2x18W Jumbo no diffuser or back plateQFJ218SQJ-0011 Quickfi t 2x18W Jumbo no diffuserQF118NQL-0011 Quickfi t 1x18W no diffuserQFNXS218SQL-10 Quickfi t Nexus 2x18W no diffuser or back plateQFNXS218SQL-11 Quickfi t Nexus 2x18W no diffuserQFJNXS218SQJ-10 Quickfi t Nexus 2x18W Jumbo no diffuser or back plateQFJNXS218SQJ-11 Quickfi t Nexus 2x18W Jumbo no diffuserDiffusers31-QL1 Quickfi t 18W Standard diffuser screened EXIT31-QL2 Quickfi t 18W Standard diffuser screened <EXIT31-QL3 Quickfi t 18W Standard diffuser screened EXIT>31-QL4 Quickfi t 18W Standard diffuser screened <EXIT>31-QL9 Quickfi t 18W Standard opal diffuser31-QJ1 Quickfi t 18W Jumbo diffuser EXIT peel off arrowsBack Plates21-00851 Back plate to suit Quickfi t 18W Standard Exit26-00035 Back plate to suit Quickfi t 18W Jumbo ExitWire Guards21-01291 Wire guard to suit Quickfi t 18W Standard ExitMounting Bracket03-02062 Ceiling bracket assembly to suit Quickfi t 18W JumboLamps 15-00227 Lamp to suit Quickfi t 18W FittingsBatteries03-00999 Battery 6 cell sub D to suit Quickfi t 18W fi ttings
41National Support CentrePh 1300 666 595 • Fax 1300 666 594
The 110V DC Quickfi t® used in central backup systems, is stylish and reliable featuring the Quickfi t® slide & connect mounting bracket enabling quick and easy installation and removal.
Features
• Universal mounting bracket for wall or ceiling • Long service life • Easy to install
Quickfi t® 110V DC Exit
Part No. Description
QFDC110NQ-0008 1x10W Non Maintained Single Sided Prismatic Diffuser
QFDC110NQ-0009 1x10W Non Maintained Single Sided Opal Diffuser
QFDC210SQ-0001 2x10W Sustained Single Sided EXIT
QFDC210SQ-0002 2x10W Sustained Single Sided <EXIT
QFDC210SQ-0003 2x10W Sustained Single Sided EXIT>
QFDC210SQ-0004 2x10W Sustained Single Sided <EXIT>
QFDC210SQ-0005 2x10W Sustained Double Sided EXIT
QFDC210SQ-0006 2x10W Sustained Double Sided EXIT AOW
QFDC210SQ-0007 2x10W Sustained Double Sided <EXIT>
QFDC210SQ-0008 2x10W Sustained Single Sided Prismatic Diffuser
QFDC210SQ-0009 2x10W Sustained Single Sided Opal Diffuser
QUICKFIT® DC EXITS
Dimensions
10W 374mm (L) x 102mm (W) x 218mm (H)
Power Consumption
10V DC• 10W Quickfi t DC 9W
Construction
• Body Moulded ABS• Bracket Zinc Steel – Powder Coated• Diffuser Moulded Acrylic
Technical Specifi cation
42National Support CentrePh 1300 666 595 • Fax 1300 666 594
Thomas & Betts emergency lighting products are designed to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Parts & Accessories
Part No. DescriptionBodiesQFDC110NQ-0010 1x10W Non Maintained No Diffuser or Back Plate
QFDC110NQ-0011 1x10W Non Maintained No Diffuser
QFDC210SQ-0010 2x10W Sustained No Diffuser or Back Plate
QFDC210SQ-0011 2x10W Sustained No Diffuser
Diffusers31-PQF Diffuser to suit QFDC110N & QFDC210S
31-QP1 Quickfi t 10W DC diffuser PICTO
31-QP2 Quickfi t 10W DC diffuser <PICTO
31-QP3 Quickfi t 10W DC diffuser PICTO>
31-Q8 Quickfi t 10W DC prismatic diffuser
31-Q9 Quickfi t 10W DC opal diffuser
31-Q1 Quickfi t 10W DC diffuser EXIT
31-Q2 Quickfi t 10W DC diffuser <EXIT
31-Q3 Quickfi t 10W DC diffuser EXIT>
31-Q4 Quickfi t 10W DC diffuser <EXIT>
Lamps15-00215 Lamp to suit 10W Quickfi t DC
QUICKFIT® DC EXITS
43National Support CentrePh 1300 666 595 • Fax 1300 666 594
The 240V Quickfi t® is a non emergency light commonly used for illuminated signs such as Evacuation, On Air and Public Toilet signage.
Features
• Universal mounting bracket for wall or ceiling • Long service life • Easy to install
QUICKFIT® 240VNON EMERGENCY
Power Consumption
240V AC 50HZ• 10W Quickfi t Non Emergency 8.5W• 18W Quickfi t Non Emergency 28W
Construction
• Body Moulded ABS• Bracket Zinc Steel – Powder Coated• Diffuser Moulded Acrylic
Quickfi t® AC 10W Non Emergency
Part No. DescriptionQFAC110 1x10W No Diffuser, Back Plate or LampQFAC210 2x10W No Diffuser, Back Plate or Lamp
Note Diffuser requirements made upon request
Quickfi t® AC 18W Non Emergency
QFAC118 1x18W No Diffuser, Back Plate, or LampQFAC218 2x18W No Diffuser, Back Plate, or Lamp
Note Diffuser requirements made upon request
Technical Specifi cations
44National Support CentrePh 1300 666 595 • Fax 1300 666 594
Parts & Accessories
Part No. Description Diffusers31-Q9 10W opal blank diffuser 31-QL9 18W opal blank diffuser
Back Plates31-QBP Back plate to suit 10W Quickfi t Non Emergency21-00851 Back plate to suit 18W Quickfi t Non Emergency
Lamps 15-00215 Lamp to suit 10W Quickfi t Non Emergency15-00227 Lamp to suit 18W Quickfi t Non Emergency
Thomas & Betts non emergency lighting products are designed to meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
QUICKFIT® 240VNON EMERGENCY
375.086.0
86.0
218.0
Dimensions
10W Non-Emergency 18W Non-Emergency
375.086.0
218.
0
86.0
218.
0
636.0102.0
45National Support CentrePh 1300 666 595 • Fax 1300 666 594
The Stanilite® Economy 10W Exit bodies and diffusers are sold separately with wall mount, single sided or double sided ceiling diffuser options.
Features
• Large 16mm2 terminal block for easy wiring• Simple plug in lead for easy installation • Strong, light weight & fi re retardant ABS body• Two mounting options
10W ECONOMY EXIT
Economy 10W Exit Bodies
Part No. DescriptionEE110M Economy 1 x 10W Maintained BodyEE110N Economy 1 x 10W Non Maintained BodyEE210S Economy 2 x 10W Sustained BodyEEAC110 Economy 240V AC 1 x 10W BodyEEDC210S Economy 110V DC 2 x 10W BodyEENXS110M Economy Nexus 1 x 10W Maintained Body
Diffusers with Pictograph Inserts to Suit Economy 10W Exits
31-PEWM Wall Mount Diffuser includes all Pictograph inserts31-PECMS Ceiling Mount Single Sided Diffuser includes all Pictograph inserts31-PECMD Ceiling Mount Double Sided Diffuser includes all Pictograph inserts
Note The above Economy diffusers include all Pictograph insert options.
Diffusers with Exit and Peel off Arrows
31-EWM Wall Mount Diffuser EXIT with Peel off Arrows 31-ECMS Ceiling Mount Single Sided Diffuser EXIT with Peel off Arrows31-ECMD Ceiling Mount Double Sided Diffuser EXIT with Peel off Arrows31-ECM4W Ceiling Mount 4 Way Diffuser EXIT with Peel off Arrows
46National Support CentrePh 1300 666 595 • Fax 1300 666 594
Technical Specifi cations
Photometric & Luminaires Spacings
Product Classification Mounting Height in Metres 2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.031-PEWM, 31-EWM C0 E1.25 4.2 4.2 4.0 3.6 4.0 3.0Wall Mount C90 E1.0 3.8 3.6 3.2 3.631-PECMS, 31-ECMS C0 E2.5 5.6 5.8 5.8 6.0 5.8 5.8 5.2 5.2 4.6Ceiling Mount SS C90 E3.2 6.0 6.2 6.4 6.6 6.6 6.6 6.6 5.8 5.831-PECMD, 31-ECMD C0 E2.5 5.6 5.8 5.8 6.0 5.8 5.8 5.2 5.2 4.6Ceiling Mount DS C90 E3.2 6.0 6.2 6.4 6.6 6.6 6.6 6.6 5.8 5.8
Note Under AS2293.1-2005, exit signs shall be mounted not less than 2m and not more than 2.7m above fl oor level, or immediately above the doorway if the doorway is higher than 2.7m. However, variations to these heights shall be allowed when specifi cally agreed by the relevant regulatory authority.
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Parts & Accessories
Part No. DescriptionDiffusers31-PEWM-B Economy Pictograph Exit wall mount diffuser – no insert31-PECM-B Economy Pictograph Exit ceiling mount single sided diffuser – no insert
Wire GuardsEEWGCM Wire guard ceiling mount to suit 10W Economy ExitEEWGWM Wire guard wall mount to suit 10W Economy Exit
Lamps15-00215 Lamp to suit 10W Economy Exit
Batteries 03-01204 Battery 3 cell sub C to suit Economy Exit
Dimensions
Power Consumption
240V AC 50HZ• 10W Economy Exit 15W
Construction
• Body Moulded ABS• Diffuser Moulded Acrylic
Economy Ceiling Mount Economy Wall Mount
10W ECONOMY EXIT
161.0 380.0
226.0
380.0108.0
161.
0
47National Support CentrePh 1300 666 595 • Fax 1300 666 594
The architecturally pleasing Legend Range has unique diffusers, which provide highly visible exit directions at all times.
Features
• Slim & elegant • Versatile mounting – recessed, surface and wall
mounted options available.• Long service life – premium quality electronics and
high temperature NiCad batteries ensures trouble free operation.
• Easy to maintain – the quick release diffuser enables easy access to the lamp.
• Test switch – allows easy function test of emergency operation. Multi functional LED indicates mains supply and charger are functioning as well as diagnostics for optional Nexus® computer controlled monitoring.
• Suspended version of Legend “LSS” – offers suspended exit lamp housing and a remote power pack that can be surface mounted or concealed in a ceiling recess or bulkhead.
• Recessed wall mounted version of Legend “LRW – recess mounted into any wall or bulkhead.
• 24m viewing distance.• Lumatec® cold cathode Legend offers advanced BBEB – battery backed electronic ballast, together with
Lumatec® cold cathode long life lamp – results in energy savings up to 300% compared to traditional T5 and T8 fl uorescent products.
Legend Ceiling Recessed
Part No. DescriptionPLR110M Recessed 1x10W Exit maintained – body onlyPLR110-BLK Recessed 1x10W Black Exit maintained, includes face plate, no diffuser
PLRC104M Recessed Cold Cathode 1x4W Exit maintained – body only
Legend Ceiling Surface Mount
PLS110M Ceiling Surface Mounted 1x10W Exit maintained – body only PLSC104M Ceiling Surface Mounted Cold Cathode 1x4W Exit maintained – body only
Legend Suspended
PLSS110M Surface Mount Suspended 1x10W Exit maintained – body onlyPLSS110M–BLK Theatre Mask Surface Mount Suspended 1x10W Exit maintained – body only
Legend Wall Mount
PLSW110M Wall Surface Mounted 1x10W Exit maintained – body onlyPLSCW110M Wall Surface Mounted Cantilever 1x10W Exit maintained – body onlyPLRW110M Wall Mount Flush 1x10W maintained Incl. PICTO Diffuser PLRW110M2 Wall Mount Flush 1x10W maintained Incl. <PICTO diffuser PLRW110M3 Wall Mount Flush 1x10W maintained Incl. PICTO> diffuser PLRWM110M Recessed Wall Mount 1x10W Exit maintained – body only
LEGEND EXIT RANGE
48National Support CentrePh 1300 666 595 • Fax 1300 666 594
LEGEND EXIT RANGE
Legend Nexus®
Part No. DescriptionPLRWNXS110M Nexus Wall Mount Flush 1x10W Exit Incl. PICTO DiffuserPLSWNXS110M Nexus Surface Wall Mount 1x10W Exit maintained – body onlyPLRNXS110M Nexus Recessed 1x10W Exit maintained – body onlyPLSNXS110M Nexus Ceiling Surface Mounted 1x10W Exit maintained – body onlyPLSSNXS110M Nexus Surface Mount Suspended 1x10W Exit maintained – body onlyPLSCWNXS110M Nexus Wall Surface Mounted Cantilever 1x10W Exit maintained - body onlyPLRCNXS104M Nexus Recessed Cold Cathode 1x4W Exit maintained – body onlyPLSCNXS104M Nexus Surface Mounted Cold Cathode 1x4W Exit maintained – body onlyPLRWNXSDR50K Nexus Wall Mount Flush Cold Cathode 1x4W Exit Incl. PICTO Diffuser
PICTO <PICTO PICTO> Straight from here Left from here Right from here
Legend Pictograph Theatre Mask Diffusers
31-PLT1 Single Sided Theatre Mask Diffuser – PICTO 31-PLT2 Single Sided Theatre Mask Diffuser – <PICTO31-PLT3 Single Sided Theatre Mask Diffuser – PICTO>31-PLT5 Double Sided Theatre Mask Diffuser – PICTO31-PLT6 Double Sided Theatre Mask Diffuser – PICTO AOW
Note Theatre Mask range does not use inserts. Theatre mask exits do not have an emergency classifi cation.
Legend Pictograph Diffusers
31-PL1 Single Sided Diffuser – PICTO31-PL2 Single Sided Diffuser – <PICTO31-PL3 Single Sided Diffuser – PICTO>31-PL5 Double Sided Diffuser – PICTO31-PL6 Double Sided Diffuser – PICTO AOW
49National Support CentrePh 1300 666 595 • Fax 1300 666 594
Legend Exit Diffuser
Part No. Description31-EL1 Single Sided Diffuser EXIT 31-EL2 Single Sided Diffuser <EXIT 31-EL3 Single Sided Diffuser EXIT> 31-EL4 Single Sided Diffuser <EXIT> 31-EL5 Double Sided Diffuser EXIT 31-EL6 Double Sided Diffuser AOW EXIT 31-EL7 Double Sided Diffuser <EXIT>
LEGEND EXIT RANGE
Technical Specifi cations
Photometric & Luminaires SpacingsProduct Classification Mounting Height in Metres 2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.0PLR110M C0 C8 6.8 7.2 7.4 7.7 7.9 8.0 8.2 8.3 8.2 7.8 C90 C6.3 6.3 6.6 6.8 7.0 7.3 7.3 7.3 7.3 7.1 6.4PLS110M C0 C8 6.8 7.2 7.4 7.7 7.9 8.0 8.2 8.3 8.2 7.8 C90 C6.3 6.3 6.6 6.8 7.0 7.3 7.3 7.3 7.3 7.1 6.4PLRC104M C0 D4 7.2 7.3 7.3 7.3 7.3 7.2 6.9 6.5 5.8 3.1 C90 E3.2 6.0 6.2 6.4 6.6 6.6 6.6 6.6 5.8 5.8
*Nexus versions of the above have the same data.
Note Under AS2293.1-2005, exit signs shall be mounted not less than 2m and not more than 2.7m above fl oor level, or immediately above the doorway if the doorway is higher than 2.7m. However, variations to these heights shall be allowedwhen specifi cally agreed by the relevant regulatory authority.Parts & Accessories.
Legend Exit Theatre Mask Diffuser
31-ELT1 Single Sided Theatre Mask Diffuser EXIT 31-ELT2 Single Sided Diffuser <EXIT 31-ELT3 Single Sided Diffuser EXIT> 31-ELT5 Double Sided Diffuser EXIT 31-ELT6 Double Sided Diffuser EXIT AOW
Note Theatre Mask range does not use inserts. Theatre mask exits do not have an emergency classifi cation.
Power Consumption
240V AC 50HZ• 10W Legend Exit 9.2W• 4W Lumatec Legend Exit 6.6W
Construction
• Visible Housing White Powder Coated Zinc Steel• Non Visible Housing White Colour Bond• Diffuser Moulded Acrylic
50National Support CentrePh 1300 666 595 • Fax 1300 666 594
422.0
121.0
16.0
93.0
155.0
CEILING
LOCKING TAB
6.0
96.0
CEILING
464.0
345.0
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Parts & Accessories
Part No. DescriptionMounting Bracket02-LWMA001 Wall bracket to suit surface mounted Legend
Lamps & Batteries15-00215 Lamp to suit 10W Legend fi ttings
CCFL4-5 Lumatec 4W lamp to suit Cold Cathode Quickfi ts – pack of 503-01205 Battery 6 cell sub C to suit Legend 10W ceiling recessed03-01207 Battery 6 cell sub C to suit Legend Lumatec CC ceiling recessed & ceiling surface mount03-01015P Battery 3 cell 4AH NiCad to suit Legend ceiling surface mount03-01204 Battery 3 cell sub C to suit Legend wall mount
160.0
234.0
81.0
WallMounted
Mounting Options
518.0474.0
345.0
470.
0 166.
065
.046
.0
112.0
64.0
PLSCW – Cantilever Surface Wall Mount
512.0490.0474.0
345.0
166.
0
131.0
53.0
64.05.0
25.0
65.0
12.0
PLRWM – Recessed Wall Mount
345.0345.0
166.066.0
1500.0 MA
X.
1500.0 MA
X.
45.045.0
64.064.0115.015.0
488.0488.0
PLSS – Suspended
474.0
345.0
231.0
118.0
65.0
64.0
25.0
45.0
PLSW – Wall Mount
LEGEND EXIT RANGE
PLR – Recessed Mount PLS – Surface Mount
471.0
345.0
244.0
16.0
160.0
77.0
CHARGING PRESS
TO TEST
93.0 422.0
96.0
6.0
345.0121.016.0
155.0
160.0
77.0
244.0
16.0
471.0
345.0
490.0474.0
12.0
65.0
166.
0
345.0
131.053.0
64.0
25.0
5.0
470.
0
112.0
166.
0
45.01500.0 M
AX
.
64.0474.0
345.0
345.0488.0
115.0
64.064.0
166.0
45.025.0
231.0
118.065.0
474.0
345.0
160.0
234.
081
.0
46.0
65.0
464.0
LOCKING
TAB
CEILING
CEILING
518.0512.0
64.0
51National Support CentrePh 1300 666 595 • Fax 1300 666 594
WEATHERTUFF™ STANDARD EXITS – PICTOGRAPH
Stanilite WeathertuffTM Standard Exits are available with10W or Lumatec® Cold Cathode lamps. All fi ttings are ruggedly constructed from polycarbonate offering anadded level of vandal resistance.
Features• 10W or Lumatec® Cold Cathode • IP65 rated• Hi temperature NiCad batteries• Optional opal diffuser
10W Standard WeathertuffTM – Pictograph
Part No. DescriptionPWEX110MWE-0001 1x10W Maintained W/Proof PICTO ExitPWEX110MWE-0002 1x10W Maintained W/Proof <PICTO ExitPWEX110MWE-0003 1x10W Maintained W/Proof PICTO> ExitPWEX110MWE-0009 1x10W Maintained W/Proof Exit Opal DiffuserPWEX210SWE-0001 2x10W Sustained W/Proof PICTO ExitPWEX210SWE-0002 2x10W Sustained W/Proof <PICTO ExitPWEX210SWE-0003 2x10W Sustained W/Proof PICTO> ExitPWEX210SWE-0009 2x10W Sustained W/Proof Exit Opal Diffuser
Lumatec® Cold Cathode Standard WeathertuffTM – Pictograph
PWEXC104ME-1 1x4W Maintained W/Proof PICTO Exit, DR 50K Hour LampPWEXC104ME-2 1x4W Maintained W/Proof <PICTO Exit, DR 50K Hour LampPWEXC104ME-3 1x4W Maintained W/Proof PICTO> Exit, DR 50K Hour LampPWEXC104ME-9 1x4W Maintained W/Proof Exit, DR 50K Hour Lamp, Opal Diffuser
10W Standard WeathertuffTM Nexus® – Pictograph PWEXNXS110MWE-1 1x10W Nexus Maintained W/Proof PICTO ExitPWEXNXS110MWE-2 1x10W Nexus Maintained W/Proof <PICTO ExitPWEXNXS110MWE-3 1x10W Nexus Maintained W/Proof PICTO> ExitPWEXNXS110MWE-9 1x10W Nexus Maintained W/Proof Exit, Opal DiffuserPWEXNXS210SWE-1 2x10W Nexus Sustained W/Proof PICTO ExitPWEXNXS210SWE-2 2x10W Nexus Sustained W/Proof <PICTO ExitPWEXNXS210SWE-3 2x10W Nexus Sustained W/Proof PICTO> ExitPWEXNXS210SWE-9 2x10W Nexus Sustained W/Proof Exit, Opal Diffuser
52National Support CentrePh 1300 666 595 • Fax 1300 666 594
PICTO <PICTO PICTO> Straight from here Left from here Right from here
Technical Specifi cations
Photometrics & Luminaires SpacingsProduct Classification Mounting Height In Metres 2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.0PWEX110MWE C0 D3.2 6.5 6.6 6.6 6.5 6.4 6.2 5.8 5.1 4.1PWEXC104MWE C90 C2.0 4.1 4.1 4.1 3.9 3.7 3.3 2.6
Note Under AS2293.1-2005, exit signs shall be mounted not less than 2m and not more than 2.7m above fl oor level, or immediately above the doorway if the doorway is higher than 2.7m. However, variations to these heights shall be allowed when specifi cally agreed by the relevant regulatory authority.
Power Consumption
240V AC 50HZ
• 10W Weathertuff Standard & Nexus Exit 15W• 4W Weathertuff Lumatec Standard & Nexus Exit 10W
Construction
• Body Hi-impact polycarbonate
Dimensions
• 380mm (W) x 190mm (H) x 130mm (D)
Weight
• 3Kg
WEATHERTUFF™ STANDARD EXITS – PICTOGRAPH
Lumatec® Cold Cathode Standard WeathertuffTM Nexus® – Pictograph
Part No. DescriptionPWEXNXSC104ME-1 1x4W Nexus Maintained W/Proof PICTO Exit, DR 50K Hour LampPWEXNXSC104ME-2 1x4W Nexus Maintained W/Proof <PICTO Exit, DR 50K Hour LampPWEXNXSC104ME-3 1x4W Nexus Maintained W/Proof PICTO> Exit, DR 50K Hour LampPWEXNXSC104ME-9 1x4W Nexus Maintained W/Proof Exit, Opal Diffuser
53National Support CentrePh 1300 666 595 • Fax 1300 666 594
Parts & Accessories
Part No. DescriptionDiffusers & Wire guard31-PWE1 10W Weatherproof diffuser PICTO31-PWE2 10W Weatherproof diffuser <PICTO31-PWE3 10W Weatherproof diffuser PICTO>WPEXWGWM Wire guard wall mount to suit Weatherproof exitLamps & Batteries15-00215 Lamp to suit 10W Weatherproof exitCCFL4-5 Lumatec 4W lamp to suit cold cathode Weatherproof – pack of 503-01014P Battery 2 cell to suit 10W Weatherproof exit03-01207 Battery 6 cell sub C to suit Lumatec CC Weatherproof exit
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
WEATHERTUFF™ STANDARD EXITS – PICTOGRAPH
54National Support CentrePh 1300 666 595 • Fax 1300 666 594
WEATHERTUFF TM
STANDARD EXITS
Stanilite® WeathertuffTM Standard Exits are available with 10W or Lumatec® Cold Cathode lamps. All fi ttings are ruggedly constructed from polycarbonate offering added level of vandal resistance.
Features• 10W or Lumatec® cold cathode • IP65 rated• Hi temperature NiCad batteries• Optional opal diffuser
10W Standard Weathertuff™
Part No. DescriptionWPEX110MWE-0001 1x10W Maintained W/Proof EXITWPEX110MWE-0002 1x10W Maintained W/Proof <EXITWPEX110MWE-0003 1x10W Maintained W/Proof EXIT>WPEX110MWE-0004 1x10W Maintained W/Proof <EXIT>WPEX110MWE-0009 1x10W Maintained W/Proof Exit, Opal DiffuserWPEX210SWE-0001 2x10W Sustained W/Proof EXIT WPEX210SWE-0002 2x10W Sustained W/Proof <EXITWPEX210SWE-0003 2x10W Sustained W/Proof EXIT>WPEX210SWE-0004 2x10W Sustained W/Proof <EXIT>WPEX210SWE-0009 2x10W Sustained W/Proof Exit, Opal Diffuser
Lumatec® Cold Cathode Standard WeathertuffTM
WPEXC104MWE-1 1x4W Maintained W/Proof EXIT, DR 50K Hour LampWPEXC104MWE-2 1x4W Maintained W/Proof <EXIT, DR 50K Hour LampWPEXC104MWE-3 1x4W Maintained W/Proof EXIT>, DR 50K Hour Lamp WPEXC104MWE-4 1x4W Maintained W/Proof <EXIT>, DR 50K Hour Lamp WPEXC104MWE-9 1x4W Maintained W/Proof EXIT, DR 50K Hour Lamp, Opal Diffuser
55National Support CentrePh 1300 666 595 • Fax 1300 666 594
10W Standard WeathertuffTM Nexus
Part No. DescriptionWPEXNXS110MWE-1 1x10W Nexus Maintained W/Proof EXITWPEXNXS110MWE-2 1x10W Nexus Maintained W/Proof <EXITWPEXNXS110MWE-3 1x10W Nexus Maintained W/Proof EXIT>WPEXNXS110MWE-4 1x10W Nexus Maintained W/Proof <EXIT>WPEXNXS110MWE-9 1x10W Nexus Maintained W/Proof Exit, Opal DiffuserWPEXNXS210SWE-1 2x10W Nexus Sustained W/Proof EXITWPEXNXS210SWE-2 2x10W Nexus Sustained W/Proof <EXITWPEXNXS210SWE-3 2x10W Nexus Sustained W/Proof EXIT>WPEXNXS210SWE-4 2x10W Nexus Sustained W/Proof <EXIT>WPEXNXS210SWE-9 2x10W Nexus Sustained W/Proof Exit, Opal Diffuser
Technical Specifi cations
Photometrics & Luminaires SpacingsProduct Classification Mounting Height In Metres 2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.0WPEX110MWE C0 D3.2 6.5 6.6 6.6 6.5 6.4 6.2 5.8 5.1 4.1 WPEXC104MWE C90 C2.0 4.1 4.1 4.1 3.9 3.7 3.3 2.6
Note Under AS2293.1-2005, exit signs shall be mounted not less than 2m and not more than 2.7m above fl oor level, or immediately above the doorway if the doorway is higher than 2.7m. However, variations to these heights shall be allowed when specifi cally agreed by the relevant regulatory authority.
Lumatec® Cold Cathode 10W Standard WeathertuffTM Nexus®
WPEXCNXS104ME-1 1x4W Nexus Maintained W/Proof EXIT, DR 50K Hour LampWPEXCNXS104ME-2 1x4W Nexus Maintained W/Proof <EXIT, DR 50K Hour LampWPEXCNXS104ME-3 1x4W Nexus Maintained W/Proof EXIT>, DR 50K Hour LampWPEXCNXS104ME-4 1x4W Nexus Maintained W/Proof <EXIT>, DR 50K Hour Lamp WPEXCNXS104ME-9 1x4W Nexus Maintained W/Proof Exit, Opal Diffuser
WEATHERTUFF TM
STANDARD EXITS
56National Support CentrePh 1300 666 595 • Fax 1300 666 594
WEATHERTUFF TM
STANDARD EXITS
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Parts & Accessories
Part No. DescriptionDiffusers31-WE1 10W weatherproof diffuser EXIT31-WE2 10W weatherproof diffuser <EXIT31-WE3 10W weatherproof diffuser EXIT>31-WE4 10W weatherproof diffuser <EXIT>
Wire GuardWPEXWGWM Wire guard wall mount to suit weatherproof exit
Lamps15-00215 Lamp to suit 10W weatherproof exitCCFL4-5 Lumatec 4W lamp to suit Cold Cathode weatherproof – pack of 5
Batteries03-01014P Battery 2 cell to suit 10W weatherproof exit03-01207 Battery 6 cell sub C to suit Lumatec CC weatherproof exit
Power Consumption
240V AC 50HZ• 10W Weathertuff Standard & Nexus Exit 15W• 10W Weathertuff Lumatec Standard & Nexus Exit 10W
Construction
• Body Hi-impact polycarbonate
Dimensions
• Weathertuff Standard & Nexus Exit 380mm(W) x 190mm(H) x 130mm(D)
Weight
• 3Kg
57National Support CentrePh 1300 666 595 • Fax 1300 666 594
The Stanilite® Cool Room Exit luminaire provides weather resistance and a degree of vandal resistance. The base and diffuser are constructed from polycarbonate.
Features• Red LED on remote power pack supply indicates
mains supply and charger is functioning correctly• Test switch allows easy function test • Sealed lead acid batteries and fl ame retardant
PCB for power supply• High temperature 105°C capacitors for extended life• Withstands minimum temperature -20C
COOL ROOM EXIT– PICTOGRAPH
15W Cool Room – Pictograph
Part No. DescriptionPCEX215RWE-0001 Cool Room 2x15W PICTO for Remote Supply PCEX215RWE-0002 Cool Room 2x15W <PICTO for Remote SupplyPCEX215RWE-0003 Cool Room 2x15W PICTO> for Remote SupplyPS702M Remote Power Supply Maintained – Runs up to 2 Units PS702-NB Remote Power Supply Non Maintained – can run any of the following: • 7x12V 10W Spitfi res lamp head • 6x12V 12W Remote lamp heads • 2x12V 35W Remote Flood Unit lamp heads
PICTO <PICTO PICTO> Straight from here Left from here Right from here
58National Support CentrePh 1300 666 595 • Fax 1300 666 594
Power Consumption
240V AC 50HZ• 15W Cool Room EXIT 15W
Construction
• Cool Room EXIT body Hi-impact polycarbonate• Remote Power supply Powder Coated Zinc seal steel powder coated
Dimensions
• Cool Room EXIT body 380mm(W) x 190mm(H) x 130mm(D)• Remote power supply 322mm(W) x 380mm(H) x 90mm(D)
Thomas & Betts emergency lighting products are designed to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
COOL ROOM EXIT– PICTOGRAPH
Technical Specifi cations
Parts & Accessories
Part No. Description
Diffusers31-PWE1 10W Cool Room diffuser PICTO31-PWE2 10W Cool Room diffuser <PICTO31-PWE3 10W Cool Room diffuser PICTO>
Wire guardWPEXWGWM Wire guard wall mount to suit Cool Room exit
Lamps15-00250 Lamp to suit 15W Cool Room exit
59National Support CentrePh 1300 666 595 • Fax 1300 666 594
COOL ROOM EXIT
The Stanilite® Cool Room Exit luminaire provides weather resistance and a degree of vandal resistance. The base and diffuser are constructed from polycarbonate.
Features
• Red LED on remote power pack supply indicates mains supply and charger is functioning correctly
• Test switch allows easy function test • Sealed lead acid batteries and fl ame retardant PCB
for power supply• High temperature 105°C capacitors for extended lif• Withstands minimum temperature -20C
15W Cool Room Exit
Part No. DescriptionCREX215RWE-0001 Cool Room 2x15W EXIT for Remote SupplyCREX215RWE-0002 Cool Room 2x15W <EXIT for Remote SupplyCREX215RWE-0003 Cool Room 2x15W EXIT> for Remote SupplyCREX215RWE-0004 Cool Room 2x15W <EXIT> for Remote SupplyPS702M Remote Power Supply Maintained – Runs up to 2 UnitsPS702-NB Remote Power Supply Non Maintained – can run any of the following: • 7x12V 10W Spitfi re lamp head • 6x12V 12W Remote lamp heads • 2x12V 35W Remote Flood Unit lamp heads
Power Consumption
240V AC 50HZ• 15W Cool Room Exit 15W
Construction
• Cool Room EXIT Body Hi-impact polycarbonate• Remote Power Supply Powder Coated Zinc seal steel powder coated
Dimensions
• Cool Room EXIT Body 380mm(W) x 190mm(H) x 130mm(D)• Remote Power Supply 322mm(W ) x 380mm(H) x 90mm(D)
Technical Specifi cations
60National Support CentrePh 1300 666 595 • Fax 1300 666 594
COOL ROOM EXIT
Thomas & Betts emergency lighting products are designed to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Parts & Accessories
Part No. DescriptionDiffusers31-WE1 10W Cool Room diffuser EXIT31-WE2 10W Cool Room diffuser <EXIT31-WE3 10W Cool Room diffuser EXIT>31-WE4 10W Cool Room diffuser <EXIT>
Wire GuardsWPEXWGWM Wire guard wall mount to suit Cool Room Exit
Lamps15-00250 Lamp to suit 15W Cool Room Exit
61National Support CentrePh 1300 666 595 • Fax 1300 666 594
Vandal Proof 10W Exits – Pictograph
Part No. DescriptionPVEX110MV-0001 1x10W single sided maintained PICTO PVEX110MV-0002 1x10W single sided maintained <PICTOPVEX110MV-0003 1x10W single sided maintained PICTO> PVEX110MV-0005 1x10W double sided maintained PICTO PVEX110MV-0006 1x10W double sided maintained PICTO AOW PVEX210SV-0001 2x10W single sided sustained PICTO PVEX210SV-0002 2x10W single sided sustained <PICTO PVEX210SV-0003 2x10W single sided sustained PICTO>PVEX210SV-0005 2x10W double sided sustained PICTO PVEX210SV-0006 2x10W double sided sustained PICTO AOW
Vandal Proof 10W Nexus® Exits – Pictograph
PVEXNXS110MV-1 Nexus 1x10W single sided maintained PICTO PVEXNXS110MV-2 Nexus 1x10W single sided maintained <PICTOPVEXNXS110MV-3 Nexus 1x10W single sided maintained PICTO> PVEXNXS110MV-5 Nexus 1x10W double sided maintained PICTOPVEXNXS110MV-6 Nexus 1x10W double sided maintained PICTO AOW PVEXNXS210SV-1 Nexus 2x10W single sided sustained PICTO PVEXNXS210SV-2 Nexus 2x10W single sided sustained <PICTOPVEXNXS210SV-3 Nexus 2x10W single sided sustained PICTO>PVEXNXS210SV-5 Nexus 2x10W double sided sustained PICTOPVEXNXS210SV-6 Nexus 2x10W double sided sustained PICTO AOW
VPKEY Vandal Proof Special Key tool required to install fi ttings. One recommended for every 50 luminaries
VANDAL PROOF EMERGENCY EXITS – PICTOGRAPH
Stanilite® Vandal Proof Emergency Exit Rangeoffers the ultimate in maximum security vandal resistant luminaries.
Features• Strong aluminium body and end caps• Anti-tamper cover screws• Extra tough UV stabilised polycarbonate lens
62National Support CentrePh 1300 666 595 • Fax 1300 666 594
Thomas & Betts emergency lighting products are designed to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
PICTO <PICTO PICTO> Straight from here Left from here Right from here
Parts & Accessories
Part No. DescriptionBodiesPVEX110MV-0010 1x10W maintained no diffuser or back platePVEX110MV-0011 1x10W maintained no diffuserPVEX210SV-0010 2x10W sustained no diffuser or back platePVEX210SV-0011 2x10W sustained no diffuser
Diffusers31-PV1 Vandal proof diffuser PICTO31-PV2 Vandal proof diffuser <PICTO31-PV3 Vandal proof diffuser PICTO>
Lamps15-00215 10W lamp to suit all 10W fi ttings
Batteries03-01015P Battery pack to suit vandal proof Exits
Key ToolVPKEY Vandal proof special key tool required to install fi ttings
Power Consumption
240V AC 50HZ• 10W Vandal Proof Exit 15W
Construction
• Body Aluminium body and end caps Anti-tamper cover screws White powder coated fi nish• Diffuser Extra Tough UV stabilised polycarbonate lens
VANDAL PROOF EMERGENCY EXITS – PICTOGRAPH
Technical Specifi cations
Dimensions
• VP Exits Signs 480mm(L) x 112mm(W) x 250mm(H)
63National Support CentrePh 1300 666 595 • Fax 1300 666 594
Stanilite® Vandal Proof Emergency Exit Rangeoffers the ultimate in maximum security, vandal resistant luminaries.
Features• Strong aluminium body and end caps
• Anti-tamper cover screws
• Extra thick UV stabilised polycarbonate lens
Vandal Proof Exits
Part No. DescriptionVPEX110MV-0001 1x10W Single Sided Maintained EXITVPEX110MV-0002 1x10W Single Sided Maintained <EXITVPEX110MV-0003 1x10W Single Sided Maintained EXIT>VPEX110MV-0004 1x10W Single Sided Maintained <EXIT>VPEX110MV-0005 1x10W Double Sided Maintained EXITVPEX110MV-0006 1x10W Double Sided Maintained EXIT AOWVPEX110MV-0007 1x10W Double Sided Maintained <EXIT>VPEX210SV-0001 2x10W Single Sided Sustained EXITVPEX210SV-0002 2x10W Single Sided Sustained <EXITVPEX210SV-0003 2x10W Single Sided Sustained EXIT>VPEX210SV-0004 2x10W Single Sided Sustained <EXIT>VPEX210SV-0005 2x10W Double Sided Sustained EXITVPEX210SV-0006 2x10W Double Sided Sustained EXIT AOWVPEX210SV-0007 2x10W Double Sided Sustained <EXIT>
VANDAL PROOFEMERGENCY EXITS
Vandal Proof Nexus® Exits
VPEXNXS110MV-1 Nexus 1x10W Single Sided Maintained EXITVPEXNXS110MV-2 Nexus 1x10W Single Sided Maintained <EXITVPEXNXS110MV-3 Nexus 1x10W Single Sided Maintained EXIT>VPEXNXS110MV-4 Nexus 1x10W Single Sided Maintained <EXIT>VPEXNXS110MV-5 Nexus 1x10W Double Sided Maintained EXITVPEXNXS110MV-6 Nexus 1x10W Double Sided Maintained EXIT AOWVPEXNXS110MV-7 Nexus 1x10W Double Sided Maintained <EXIT>VPEXNXS210SV-1 Nexus 2x10W Single Sided Sustained EXITVPEXNXS210SV-2 Nexus 2x10W Single Sided Sustained <EXITVPEXNXS210SV-3 Nexus 2x10W Single Sided Sustained EXIT>VPEXNXS210SV-4 Nexus 2x10W Single Sided Sustained <EXIT>VPEXNXS210SV-5 Nexus 2x10W Double Sided Sustained EXITVPEXNXS210SV-6 Nexus 2x10W Double Sided Sustained EXIT AOWVPEXNXS210SV-7 Nexus 2x10W Double Sided Sustained <EXIT>
VPKEY Vandal Proof Special Key tool required to install fi ttings. One recommended for every 50 luminaries
64National Support CentrePh 1300 666 595 • Fax 1300 666 594
VANDAL PROOFEMERGENCY EXITS
Thomas & Betts emergency lighting products are designed to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Parts & Accessories
Part No. DescriptionBodiesVPEX110MV-0010 1x10W Maintained no diffuser or back plate VPEX110MV-0011 1x10W Maintained no diffuserVPEX210SV-0010 2x10W Sustained no diffuser or back plateVPEX210SV-0011 2x10W Sustained no diffuserVPEXNXS110MV-10 Nexus 1x10W Maintained no diffuser or back plateVPEXNXS110MV-11 Nexus 1x10W Maintained no diffuserVPEXNXS210SV-10 Nexus 2x10W Sustained no diffuser or back plateVPEXNXS210SV-11 Nexus 2x10W Sustained no diffuser
Diffusers31-V1 Vandal proof diffuser EXIT 31-V2 Vandal proof diffuser <EXIT31-V3 Vandal proof diffuser EXIT>
31-V4 Vandal proof diffuser <EXIT>
Lamp15-00215 10W lamp to suit all 10W fi ttings
Battery03-01015P Battery 3 Cell to suit Vandal Proof Exits
Key ToolVPKEY Vandal proof special key tool required to install fi ttings
Dimensions
• VP Exit Signs 480mm(L) x 112mm(W) x 250mm(H)
Power Consumption
240V AC 50HZ• 10W Vandal Proof Exit 15W
Construction
All equipment is mounted on removable gear trays and suspended by lanyards for easy maintenance and installation. • Body Aluminium body and end caps Anti-tamper cover screws White powder coated fi nish• Diffuser Extra Tough UV stabilised polycarbonate lens
Technical Specifi cations
65National Support CentrePh 1300 666 595 • Fax 1300 666 594
REDUCED HEIGHT EXIT
Reduced height ceiling mount exit suitable for low height ceilings. Cable entry from the top enables easy mains wiring. Available in two and four sided versions.
Features• Reduced height• Low power consumption • Easy to install• Cable entry from top • High temperature NiCad batteries and electronic
components for extended life• Advanced battery backed electronic ballast lamp
control technology – ensures lamp life is optimised whilst providing power consumption savings of up to 250% when compared to other conventionally powered exit signs
10W Reduced Height Standard Exits
Part No. DescriptionRHE110M-DS Reduced Height 2 Sided 1x10W EXIT maintainedRHE210M-4S Reduced Height 4 Sided 2x10W EXIT maintained
10W Reduced Height Nexus Exits
RHENXS110M-DS Nexus Reduced Height 2 Sided 1x10W EXIT maintainedRHENXS210M-4S Nexus Reduced Height 4 Sided 2x10W EXIT maintained
Power Consumption
240V AC 50Hz-20W• 10W Reduced Height 2 Sided Exit 9.5W• 10W Reduced Height 4 Sided Exit 20W
Construction
• Body and Gear Tray White Powder Coated Zinc Seal Steel• Diffuser Moulded Acrylic
Technical Specifi cations
10W Reduced Height Standard Exit – Pictograph
Part No. DescriptionPRHE110M-DS1 Reduced Height 2 Sided 1x10W PICTO maintainedPRHE210M-4S1 Reduced Height 4 Sided 2x10W PICTO maintained
10W Reduced Height Nexus Exits – Pictograph
Part No. DescriptionPRHENXS110M-DS Nexus Reduced Height 2 Sided 1x10W PICTO maintainedPRHENXS210M-4S1 Nexus Reduced Height 4 Sided 2x10W PICTO maintained
66National Support CentrePh 1300 666 595 • Fax 1300 666 594
Thomas & Betts emergency lighting products are designed to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Parts & Accessories
Part No. DescriptionDiffusers31-QP1 Quickfi t 10W diffuser PICTO31-Q1 Quickfi t 10W diffuser EXIT31-Q2 Quickfi t 10W diffuser <EXIT31-Q3 Quickfi t 10W diffuser EXIT>31-Q4 Quickfi t 10W diffuser <EXIT>
Lamp15-00215 Lamp to suit Reduced Height Exit
Batteries03-01204 Battery to suit 2 Sided Reduced Height Exit03-01207 Battery to suit 4 Sided Reduced Height Exit
REDUCED HEIGHT EXIT
67National Support CentrePh 1300 666 595 • Fax 1300 666 594
SPITFIRE® RECESSEDEMERGENCY
Stanilite Spitfi re® recessed emergency range has been designed to be as unobtrusive as practically possible. The Spitfi re® is available in two lamp head sizes of 85mm or 141mm, pre-cabled with a universal 6-way lamp head lead connector assembly that simply snaps into the remote pack.
Features
• Power pack complete with fl ex and plug • Optional protective clear dome or IP65 weatherproof
enclosure lamp head wire guard• Universal wall or ceiling mount. • Recessed or surface mount options available• Hi-temperature NiCad batteries for SF series, sealed
lead acid for EWF series• Surface mount electronics and 105°C rated electronic
components • Filament continuity circuit – monitors whether the
lamp is present and if the fi lament has failed
10W Economy Spitfi re® D10 Non Maintained Emergency
Part No. DescriptionEWF10FP 10W Recessed with 141mm head, fl ex & plug EWF10FPCD 10W Recessed with 141mm clear dome, fl ex & plug
7W Spitfi re® D12.5 Non Maintained Emergency
SFB07 7W Surface mounted SF07FP 7W Recessed with 85mm head, fl ex & plug SF07FPCD 7W Recessed with 85mm clear dome, fl ex & plug SF07FP-SS 7W Recessed with 85mm stainless steel, fl ex & plug SF07FPLH 7W Recessed with 141mm head, fl ex & plug SF07FPLHCD 7W Recessed with 141mm clear dome, fl ex & plug
10W Spitfi re® D20 Non Maintained Emergency
SFB10 10W Surface mounted SFB10CD 10W Surface mounted with clear dome SFB10-BLK 10W Surface mounted blackSF10FP 10W Recessed with 85mm head, fl ex & plug SF10FPCD 10W Recessed with 85mm clear dome, fl ex & plug SF10FP-SS 10W Recessed with 85mm stainless steel, fl ex & plug SF10FPSSCD 10W Recessed with 85mm stainless steel clear dome, fl ex & plug SF10FP-BLK 10W Recessed with 85mm black head, fl ex & plug SF10FP-RP 10W Recessed with 85mm rust proof head, fl ex & plug SF10FP-WPH 10W Recessed with 85mm w/proof surface mount head, fl ex & plugSF10FPWG 10W Recessed with 85mm head, wire guardSF10FPLH 10W Recessed with 141mm head, fl ex & plug SF10FPLHCD 10W Recessed with 141mm head, fl ex & plug, clear dome
SF10FP
68National Support CentrePh 1300 666 595 • Fax 1300 666 594
SPITFIRE® RECESSEDEMERGENCY
EWF10FP SFB10 SF10FP-WPH
240V AC Spitfi re®
Part No. DescriptionSFAC10 240V AC 10W 6V Recessed with 85mm headSFAC10LH 240V AC 10W 6V Recessed with 141mm head
110V DC Spitfi re® Non Maintained Emergency
SFBDC10 110V DC 10W Surface mountSFDC10 110V DC 10W Recessed with 85mm headSFDC10FP 110V DC 10W Recessed with 85mm head, fl ex & plugSFDC10FPLH 110V DC 10W Recessed with 141mm head, fl ex & plug
Non Maintained Nexus® Spitfi re® Emergency
SFBNXS10 Nexus 10W Surface mountSFBNXS10CD Nexus 10W Surface mount 85mm clear domeSFNXS10FP Nexus 10W Recessed with 85mm head, fl ex & plugSFNXS10FPCD Nexus 10W Recessed with 85mm clear dome, fl ex & plugSFNXS10FP-SS Nexus 10W Recessed with 85mm stainless steel, fl ex & plugSFNXS10FP-BLK Nexus 10W Recessed with 85mm black head, fl ex & plugSFNXS10FP-WPH Nexus 10W Recessed with 85mm w/proof surface mt head, fl ex & plugSFNXS10FP-RP Nexus 10W Recessed with 85mm rust proof, round pin, fl ex & plugSFNXS10FPWG Nexus 10W Recessed with 85mm fl ex & plug, wire guardSFNXS10FPLH Nexus 10W Recessed with 141mm head, fl ex & plugSFNXS10FPLHCD Nexus 10W Recessed with 141mm head clear dome, fl ex & plug
69National Support CentrePh 1300 666 595 • Fax 1300 666 594
Technical Specifi cations
Photometric & Luminaires SpacingsProduct Classification Mounting Height in Metres
2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.010W Economy C0 D10 10.2 10.6 10.9 11.1 11.3 11.4 11.5 11.6 11.6 11.2Spitfi re C90 D10 10.2 10.6 10.9 11.1 11.3 11.4 11.5 11.6 11.6 11.27W Spitfi re C0 D12.5 11.5 11.5 11.8 12.1 12.4 12.5 12.7 12.9 13.0 12.8 C90 D12.5 11.5 11.5 11.8 12.1 12.4 12.5 12.7 12.9 13.0 12.810W Spitfi re C0 D20 13.1 13.6 14.1 14.5 14.8 15.1 15.5 15.8 16.1 16.4 C90 D20 13.1 13.6 14.1 14.5 14.8 15.1 15.5 15.8 16.1 16.4SFB10-BLK C0 D6.3 8.6 8.8 9.0 9.1 9.2 9.2 9.2 9.0 8.7 7.7 C90 D6.3 8.6 8.8 9.0 9.1 9.2 9.2 9.2 9.0 8.7 7.7SF10FP-BLK C0 D6.3 8.6 8.8 9.0 9.1 9.2 9.2 9.2 9.0 8.7 7.7 C90 D6.3 8.6 8.8 9.0 9.1 9.2 9.2 9.2 9.0 8.7 7.7
*Nexus versions of the above have the same data
Power Consumption
240V AC 50HZ• All Spitfi res 8.5W
Lamp Head Cut Out
SF07FP• Small head 70mm• Large head 130mmSF10FP• Small head 70mm• Large head 130mm
Construction
• Zinc Steel – White Powder Coated• Clear Dome – polycarbonate
SPITFIRE® RECESSEDEMERGENCY
70National Support CentrePh 1300 666 595 • Fax 1300 666 594
Parts & Accessories
Part No. Description7 Watt02-SFSHD12.5 85mm head assembly02-SFSHCD 85mm head assembly – clear dome02-SFLHD12.5 141mm head assembly02-SFLHCD 141mm head assembly – clear dome02-SFLHCD-BLK 141mm head assembly black – clear dome02-SF07FP 7W recessed with fl ex & plug, no head15-00803 Lamp to suit 7W Spitfi re03-01206 Battery 10 cell sub C to suit 7W Spitfi re
10 Watt02-SFSHD20 85mm head assembly02-SFSHCD 85mm head assembly – clear dome02-SFLHD20 141mm head assembly02-SFLHCD 141mm head assembly – clear dome02-SFLHCD-BLK 141mm head assembly black – clear dome02-SF10FP 10W recessed with fl ex & plug, no head15-00800 Lamp to suit 10W Spitfi re03-01017P Battery 5 cell 4Ah NiCad to suit 10W Spitfi re
EWF Series02-SFLHD10 141mm head assembly clear dome15-00800 Lamp to suit EWF series03-01210 Battery to suit EWF series
Note Rust proof, weatherproof, stainless steel and black options available upon request
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
SPITFIRE® RECESSEDEMERGENCY
71National Support CentrePh 1300 666 595 • Fax 1300 666 594
Stanilite® Economy range of Emergency Battens are reliable, cost effective and suitable for many applications. Supplied bare as standard, diffuser and wire guard accessories are available. Designed using quality components including high temperature NiCad batteries.
Features
• Available in single or twin lamped, non-maintainedor maintained
• Optional acrylic prismatic diffusers or white powdercoated steel wire guards
• Hi-temp NiCad batteries
ECONOMYEMERGENCY BATTENS
Economy Battens
PhotometricsPart No. Description Class Bare 26-PREBT 21-WGEBT Batten Diffuser Wire GuardEBT118N-0001 1x18W Non Maintained 5C SUB-C 2H C0 D25 D20 D20 C90 C25 C16 C20EBT118M-0001 1x18W Maintained 5C SUB-C 2H C0 D25 D20 D20 C90 C25 C16 C20EBT218M-0001 2x18W Maintained 5C SUB-C 2H C0 D20 D20 D20 C90 C20 C12.5 C20 C180 D16 D12.5 D12.5EBT136N-0001 1x36W Non Maintained 7C SUB-C 2H C0 D40 D32 D32 C90 C40 C32 C12.5EBT136M-0001 1x36W Maintained 7C SUB-C 2H C0 D40 D32 D32 C90 C40 C32 C12.5EBT236M-0001 2x36W Maintained 7C SUB-C 2H C0 D40 D40 D32 C90 C25 C32 C40 C180 D32 D25 D25
Note Lamps not includedThe classifi cations listed represent the best test results at an average mounting height. For specifi c results, particularly at extra high mounting heights, contact Thomas & Betts
Diffuser Kits
Part No. Description26-PREBT18 Diffuser Kit to Suit Single & Twin 18W Batten26-PREBT36 Diffuser Kit to Suit Single & Twin 36W Batten
Wire Guards
21-WGEBT18 Wire Guard to Suit Single & Twin 18W Batten21-WGEBT36 Wire Guard to Suit Single & Twin 36W Batten
72National Support CentrePh 1300 666 595 • Fax 1300 666 594
Technical Specifi cations
Luminaire SpacingsPhotometric Mounting Height in MetresClassifi cation 2.1 2.4 2.7 3.0 3.6 4.0 5.0 6.0 8.0 10.0C12.5 7.8 8.2 8.6 8.9 9.5 9.8 10.2 10.3 9.4 6.5C16 8.3 8.8 9.3 9.7 10.3 10.7 11.3 11.6 11.3 9.6C20 8.9 9.4 9.9 10.3 11.1 11.5 12.3 12.8 13.0 12.0C25 9.4 10.0 10.5 11.0 11.9 12.4 13.4 14.0 14.6 14.2C32 10.0 10.7 11.3 11.8 12.8 13.4 14.5 15.4 16.4 16.5C40 10.6 11.3 12.0 12.6 13.6 14.3 15.6 16.6 17.9 18.5D12.5 11.5 11.5 11.8 12.1 12.5 12.7 13.0 12.8 11.3 7.6D16 12.1 12.6 13.0 13.3 13.9 14.1 14.6 14.6 13.8 11.5D20 13.1 13.6 14.1 14.5 15.1 15.5 16.1 16.4 16.0 14.5D25 14.2 14.7 15.3 15.7 16.5 16.9 17.7 18.1 18.2 17.3D32 15.4 16.1 16.7 17.2 18.0 18.5 19.5 20.2 20.7 20.3D40 16.7 17.4 18.0 18.6 19.6 20.1 21.3 22.1 23.0 23.1
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Parts & Accessories
Part No. Description03-01208 Battery to suit 18W EBT Battens03-01209 Battery to suit 36W EBT Battens
Dimensions
Bare Length Bare Diffused Wire Guard Weight & Width Height Height Height• 18W 2kg 620x106mm 95mm 102mm 106mm• 36W 3kg 1,230x106mm 95mm 102mm 106mm
Construction
• Body & Gear Tray White powder coated zinc aluminium, moulded endcaps• Diffuser Acrylic prismatic• Wire Guard Galvanised Steel
ECONOMYEMERGENCY BATTENS
Note In a single lamp emergency luminaire the spacings in the C0 plane are proportional to Fig 1. In a twin lamp emergency luminaire one tube is maintained in emergency mode. As a result the second “mains only” tube interferes with the light distribution in several planes. For this reason, all twin lamp fi ttings have C0, C90 and C180 classifi cations as per Fig 2.
C0 C0
C90
C90FIG 1
C180 C0
C90
C90FIG 2
73National Support CentrePh 1300 666 595 • Fax 1300 666 594
Stanilite® Premium range of Emergency Battens aresuitable for a wide range of commercial and industrial applications. Superior photometric performance of our “PBT” Premium Range Batten gives higher light output per unit meaning fewer fi ttings need to be installed in a given area which results in reduce installation, maintenance and running costs.
Features
• Constructed from roll-formed zinc plated steel with unique ribbed edges for added strength. Fully powder coated with ABS non-discolouring endcaps
• Superior photometric performance• Bare, diffused and wireguard accessories available• Surface mount electronics • Hi-temp NiCad batteries
Premium Battens
Photometrics
Part No. Description Class Bare 26-PREBT 21-WGEBT Batten Diffuser Wire GuardBT110M-0001 1x10W Maintained C0 D20 D16 D16 C90 C20 C16 C20BT110N-0001 1x10W Non Maintained C0 D20 D16 D16 C90 C20 C16 C20PBT118M 1x18W Maintained C0 D40 D32 D32 C90 C40 C25 C40PBT118N 1x18W Non Maintained C0 D32 D40 D32 C90 C32 C25 C32PBT136M 1x36W Maintained C0 D63 D80 D50 C90 D20 C32 C50PBT136N 1x36W Non Maintained C0 D63 D80 D50 C90 D20 C32 C50PBT158M 1x58W Maintained C0 D63 D63 D63 C90 C20 C40 C20PBT158N 1X58W Non Maintianed C0 D63 D63 D63 C90 C20 C40 C20PBT218M 2x18W Maintained C0 D40 D40 D32 C90 C40 C25 C32 C180 D32 D25 D25PBT236M 2x36W Maintained C0 D63 D63 D50 C90 D20 C50 D16 C180 D50 D40 D40PBT236S 2x36W Sustained C0 D63 D63 D50 C90 D20 C50 D16 C180 D50 D40 D40PBT258M 2x58W Maintained - - - -
Note Lamps not included. The classifi cations listed represent the best test results at an average mounting height. For specifi c results, particularly at extra high mounting heights, contact Thomas & Betts
PREMIUMEMERGENCY BATTENS
74National Support CentrePh 1300 666 595 • Fax 1300 666 594
Premium Battens Nexus®
Photometrics
Part No. Description Class Bare 26-PREBT 21-WGEBT Batten Diffuser Wire GuardBTNXS110M-0001 Nexus 1x10W Maintained C0 D20 D20 - C90 C20 C16 -
BTNXS110N-0001 Nexus 1x10W Non Maintained C0 D20 D20 - C90 C20 C16 -
PBTNXS118M Nexus 1x18W Maintained C0 D40 D32 D40 C90 C40 C25 C40
PBTNXS118N Nexus 1x18W Non Maintained C0 D40 D32 D40 C90 C40 C25 C40
PBTNXS136M Nexus 1x36W Maintained C0 D63 D63 D50 C90 C63 E32 D16
PBTNXS136N Nexus 1x36W Non Maintained C0 D63 D63 D50 C90 C63 E32 D16
PBTNXS158M Nexus 1x58W Maintained C0 D63 D63 D63 C90 C20 C40 D20
PBTNXS158N Nexus 1x58W Non Maintained C0 D63 D63 D63 C90 C20 C40 D20
PBTNXS218M Nexus 2x18W Maintained C0 D40 D40 D40 C90 C40 C25 C40 C180 D32 D25 D32
PBTNXS218S Nexus 2x18W Sustained C0 D40 D40 D40 C90 C40 C25 C40 C180 D32 D25 D32
PBTNXS236M Nexus 2x36W Maintained C0 D63 D63 D63 C90 D20 D16 D20 C180 D63 D50 D50
PBTNXS236S Nexus 2x36W Sustained C0 D63 D63 D63 C90 D20 D16 D20 C180 D63 D50 D50
PBTNXS258M Nexus 2x58W Maintained – – – –
Note Lamps not includedThe classifi cations listed represent the best test results at an average mounting height. For specifi c results, particularly at extra high mounting heights, contact Thomas & Betts
PREMIUMEMERGENCY BATTENS
75National Support CentrePh 1300 666 595 • Fax 1300 666 594
PREMIUMEMERGENCY BATTENS
Note In a single lamp emergency luminaire the spacings in the C0 plane are proportional to Fig 1. In a twin lamp emergency luminaire one tube is maintained in emergency mode. As a result the second “mains only” tube interferes with the light distribution in several planes. For this reason, all twin lamp fi ttings have C0, C90 and C180 classifi cations as per Fig 2.
Diffusers Kits
Part No. Description26-PPRBT110 Diffuser Kit to Suit Single 10W Batten
26-PREBT18 Diffuser Kit to Suit Single & Twin 18W Batten
26-PREBT36 Diffuser Kit to Suit Single & Twin 36W Batten
26-PREBT58 Diffuser Kit to Suit Single & Twin 58W Batten
Wire Guards
21-PWGBT110 Wire Guard to Suit Single 10W Batten
21-WGEBT18 Wire Guard to Suit Single & Twin 18W Batten
21-WGEBT36 Wire Guard to Suit Single & Twin 36W Batten
21-WGEBT58 Wire Guard to Suit Single & Twin 58W Batten
Technical Specifi cations
Luminare Spacings Mounting Height in MetresClassification 2.1 2.4 2.7 3.0 3.6 4.0 5.0 6.0C16 8.3 8.8 9.3 9.7 10.3 10.7 11.3 11.6C20 8.9 9.4 9.9 10.3 11.1 11.5 12.3 12.8C25 9.4 10.0 10.5 11.0 11.9 12.4 13.4 14.0C32 10.0 10.7 11.3 11.8 12.8 13.4 14.5 15.4C40 10.6 11.3 12.0 12.6 13.6 14.3 15.6 16.6C50 11.3 12.0 12.7 13.4 14.5 15.2 16.7 17.9C63 11.9 12.8 13.5 14.2 15.5 16.2 17.9 19.2D16 12.1 12.6 13.0 13.1 13.9 14.1 14.6 14.6D20 13.1 13.6 14.1 14.5 15.1 15.5 16.1 16.4D25 14.2 14.7 15.3 15.7 16.5 16.9 17.7 18.1D32 15.4 16.1 16.7 17.2 18.0 18.5 19.5 20.2D40 16.7 17.4 18.0 18.6 19.6 20.1 21.3 22.1D50 18.0 18.7 19.4 20.1 21.2 21.8 23.2 24.2D63 19.4 20.3 21.2 21.8 23.0 23.7 25.2 26.4D80 21.1 22.0 22.8 23.6 25.0 25.8 27.5 28.9E32 9.4 10.2 11.2 12.0 13.4 14.4 16.2 17.8
C0 C0
C90
C90FIG 1
C180 C0
C90
C90FIG 2
76National Support CentrePh 1300 666 595 • Fax 1300 666 594
Parts & Accessories
Part No. Description 03-01014P Battery to suit 10W BT Battens03-01015P Battery to suit 18W PBT Battens03-01001P Battery to suit 36W PBT Battens03-01013P Battery to suit 58W PBT Battens
Dimensions
Bare Length Bare Diffused Wire Guard Weight & Width Height Height Height• 10W 2kg 350x120mm 85mm 105mm 95mm • 18W 2kg 620x106mm 95mm 102mm 106mm• 36W 3kg 1230x106mm 95mm 102mm 106mm• 58W 3kg 1530x106mm 95mm 102mm 106mm
Construction
• Body & White powder coated Gear Tray steel• Diffuser Acrylic prismatic• Wire Guard Galvanised Steel
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
PREMIUMEMERGENCY BATTENS
77National Support CentrePh 1300 666 595 • Fax 1300 666 594
Stanilite® Vandal Proof Emergency Batten Rangeoffers the ultimate in maximum security vandal resistant luminaries.
Features
• Strong aluminium body and end caps• Anti-tamper cover screws• Extra Tough UV stabilised polycarbonate lens
VANDAL PROOFEMERGENCY BATTENS
Vandal Proof Battens
Part No. DescriptionVP118M 1x18W Maintained includes diffuserVP136M 1x36W Maintained includes diffuserVP236M 2x36W Maintained includes diffuser
Note Lamps not included
Vandal Proof Nexus® Battens
VPNXS118M Nexus 1x18W Maintained includes diffuserVPNXS136M Nexus 1x36W Maintained includes diffuserVPNXS236M Nexus 2x36W Maintained includes diffuser
Note Lamps not included
VPKEY Vandal Proof Special Key tool required to install fi ttings. One recommended for every 50 luminaries
Technical Specifi cations
Photometrics & Luminaire Spacings
Product Classification Mounting Height in Metres 2.1 2.4 2.7 3.0 3.3 4.0VP118M C0 D32 15.4 16.1 16.7 17.2 17.6 18.5VPNXS118M C90 C20 8.9 9.4 9.9 10.3 10.7 11.5VP136M C0 D63 19.4 20.3 21.1 21.8 22.4 23.7VPNXS136M C90 C50 11.3 12.0 12.7 13.4 14.0 15.2VP236M C0 D50 18.0 18.7 19.4 20.1 20.7 21.8VPNXS236M C90 C40 10.6 11.3 12.0 12.6 13.1 14.3 C180 D16 12.1 12.6 13.0 13.3 13.6 14.1
78National Support CentrePh 1300 666 595 • Fax 1300 666 594
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Parts & Accessories
Part No. Description 03-01015P Battery, 3 cell to suit 18W battens03-01001P Battery, 4 cell to suit 36W battensVPKEY Vandal proof special key tool required to install fi ttings
Dimensions
• VP 18W Battens 720mm(L) x 105mm(W) x 95mm(H)• VP 36W Battens 1330mm(L) x 105mm(W) x 95mm(H)
Construction
All equipment is mounted on removable gear trays and suspended by lanyards for easy maintenance and installation.• Body Aluminium body and end caps Anti-tamper cover screws White powder coated fi nish• Diffuser Extra Tough UV stabilised polycarbonate lens
VANDAL PROOFEMERGENCY BATTENS
Note In a single lamp emergency luminaire the spacings in the C0 plane are proportional to Fig 1. In a twin lamp emergency luminaire one tube is maintained in emergency mode. As a result the second “mains only” tube interferes with the light distribution in several planes. For this reason, all twin lamp fi ttings have C0, C90 and C180 classifi cations as per Fig 2.
C0 C0
C90
C90FIG 1
C180 C0
C90
C90FIG 2
79National Support CentrePh 1300 666 595 • Fax 1300 666 594
WEATHERPROOFECONOMY
EMERGENCY BATTENS
Economy Weatherproof
Part No. DescriptionEWA136AC Economy Weatherproof 1x36W 240V AC Acrylic DiffuserEWP136AC Economy Weatherproof 1x36W 240V AC Polycarbonate DiffuserEWA136M Economy Weatherproof 1x36W Maintained Acrylic DiffuserEWA236AC Economy Weatherproof 2x36W 240V AC Acrylic DiffuserEWP236AC Economy Weatherproof 2x36W 240V AC Polycarbonate DiffuserEWA236M Economy Weatherproof 2x36W Maintained Acrylic DiffuserEWP258AC Economy Weatherproof 2x58W 240V AC Polycarbonate Diffuser
Note Lamps not included
The Stanilite® Economy Weatherproof Batten range offers cost effective reliability and weatherproof resistance, available in both AC and emergency. Supplied standard with stainless steel clips, withthe option of polycarbonate or acrylic diffusers.
Features
• Weatherproof rating IP65 • Large 16mm2 mains terminal for easy installation • High temperature NiCad battery for longer life• Cable entry at either end of base
Construction
• Body Zinc aluminium, moulded end caps • Diffuser Acrylic or polycarbonate
Dimensions
• 36W Single Battens 1285mm(L) x 110mm(W) x 110mm(H)• 36W Twin Battens 1285mm(L) x 185mm(W) x 110mm(H)• 58W Twin Battens 1580mm(L) x 185mm(W) x 110mm(H)
Thomas & Betts emergency lighting products are designed to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Technical Specifi cations
Parts & Accessories
Part No. DescriptionDiffusers31-EWA136 Economy acrylic diffuser to suit 1x36W batten 31-EWA236 Economy acrylic diffuser to suit 2x36W batten 31-EWP236 Economy polycarbonate diffuser to suit 2x36W batten
Batteries03-01209 Battery to suit 36W economy batten
80National Support CentrePh 1300 666 595 • Fax 1300 666 594
WEATHERPROOFEMERGENCY BATTENS
Weatherproof Battens T8 Nexus®
WPNXS118M Weatherproof Nexus 1x18W Maintained WPNXS118N Weatherproof Nexus 1x18W Non Maintained WPNXS136M Weatherproof Nexus 1x36W Maintained WPNXS136N Weatherproof Nexus 1x36W Non Maintained WPNXS218M Weatherproof Nexus 2x18W Maintained WPNXS236M Weatherproof Nexus 2x36W MaintainedWPNXS236S Weatherproof Nexus 2x36W SustainedWPNXS258M Weatherproof Nexus 2x58W Maintained
Note Lamps not included
The Stanilite® Weatherproof Batten range offers weather resistance and a degree of vandal resistance. The bodies are constructed from GRP for added strength.
Features
• Weatherproof rating IP65 • Large 16mm2 mains terminal for easy installation • High temperature NiCad battery for longer life• Cable entry at either end of base• T8 standard, T5 options available
Weatherproof Battens 110V DC
WPDC118M Weatherproof 1x18W 110V DC BattenWPDC136N Weatherproof 1x36W 110V DC BattenWPDC218M Weatherproof 2x18W 110V DC BattenWPDC236M Weatherproof 2x36W 110V DC Batten
Note Lamps not included
Weatherproof Battens T8
Part No. DescriptionWP118M Weatherproof 1x18W Maintained WP118N Weatherproof 1x18W Non MaintainedWP136M Weatherproof 1x36W Maintained WP136N Weatherproof 1x36W Non MaintainedWP158N Weatherproof 1x58W Non MaintainedWP218M Weatherproof 2x18W Maintained WP218S Weatherproof 2x18W Sustained WP236M Weatherproof 2x36W Maintained WP236S Weatherproof 2x36W Sustained WP258M Weatherproof 2x58W Maintained
Note Lamps not included
81National Support CentrePh 1300 666 595 • Fax 1300 666 594
WEATHERPROOFEMERGENCY BATTENS
Technical Specifi cations
Photometrics & Luminaire Spacings
Part No. Classification Mounting Height in Metres
2.1 2.4 2.7 3.0 3.6 4.0 5.0 6.0WP118 C0 D32 15.4 16.1 16.7 17.2 18.0 18.5 19.5 20.2 C90 D12.5 11.1 11.5 11.8 12.1 12.5 12.7 13.0 12.8WP136 C0 D50 18.0 18.7 19.4 20.1 21.2 21.8 23.2 24.2 C90 C40 10.6 11.3 12.0 12.6 13.6 14.3 15.6 16.6WP218M C0 D40 16.7 17.4 18.0 18.6 19.6 20.1 21.3 22.1WP218S C90 C32 10.0 10.7 11.3 11.8 12.8 13.4 14.5 15.4 C180 D25 14.2 14.7 15.3 15.7 16.5 16.9 17.7 18.1WP236M C0 D63 19.4 20.3 21.1 21.8 23.0 23.7 25.2 26.4WP236S C90 C50 11.3 12.0 12.7 13.4 14.5 15.2 16.7 17.9 C180 D50 18.0 18.7 19.4 20.1 21.2 21.8 23.2 24.2
Note The best classifi cation for the average mounting height is selected from a number of test reports.
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Parts & Accessories
Part No. Description03-01015P Battery to suit 18W Battens03-01001P Battery to suit 36W Battens03-01013P Battery to suit 58W Battens31-WP218 Diffuser to suit 2x18W weatherproof batten 31-WP236 Diffuser to suit 2x36W weatherproof batten
Dimensions
• 1X18W Maint 650mm (L) x 185mm (W) x 110mm (H)• 1X18W Non Maint 650mm (L) x 115mm (W) x 110mm (H)• 2X18W 650mm (L) x 185mm (W) x 110mm (H)• 1X36W 1285mm (L) x 110mm (W) x 110mm (H)• 2X36W 1285mm (L) x 185mm (W) x 110mm (H)* Nexus versions of the above are the same dimensions& weight
Construction
• Body GRP• Diffuser Moulded polycarbonate as standard. Acrylic optional
Weight
• 18W Weatherproof Battens 3.5kg• 36W Weatherproof Battens 4.5kg
Note In a single lamp emergency luminaire the spacings in the C0 plane are proportional to Fig 1. In a twin lamp emergency luminaire one tube is maintained in emergency mode. As a result the second “mains only” tube interferes with the light distribution in several planes. For this reason, all twin lamp fi ttings have C0, C90 and C180 classifi cations as per Fig 2.
C0 C0
C90
C90FIG 1
C180 C0
C90
C90FIG 2
82National Support CentrePh 1300 666 595 • Fax 1300 666 594
The Stanilite® Weatherforce Weatherproof Bulkheads offer weather resistance and a degree of vandal resistance. The bodies are constructed from either polycarbonate or diecast aluminium while the diffusers are constructed from polycarbonate with semi tamper proof screws.
Features
• Weatherproof rating IP65 • Large 16mm2 mains terminal for easy installation • High temperature NiCad batteries for longer life• Cable entry at either end of base• T5 options available• Opal or prismatic diffusers
WEATHERFORCEWEATHERPROOF
BULKHEADS
WeatherforceTM Weatherproof Bulkheads with Diecast Base
Part No. DescriptionWPDBH110MOP Weatherproof Diecast 1x10W Maintained Opal Diffuser WPDBH110MPR Weatherproof Diecast 1x10W Maintained Prismatic Diffuser WPDBH110NOP Weatherproof Diecast 1x10W Non Maintained Opal Diffuser WPDBH110NPR Weatherproof Diecast 1x10W Non Maintained Prismatic DiffuserWPDBH210SPR Weatherproof Diecast 2x10W Sustained Prismatic DiffuserWPDBH210SOP Weatherproof Diecast 2x10W Sustained Opal DiffuserWPDBHC104MOP Weatherproof Diecast 1x4W Maintained Cold Cathode Opal DiffuserWPDBHC104MPR Weatherproof Diecast 1x4W Maintained Cold Cathode Prismatic Diffuser
Note Lamps not included
WeatherforceTM 18W Weatherproof Bulkheads
WPBH118MPR W/proof Polycarbonate 1x18W Maintained Prismatic DiffuserWPBH118NPR W/proof Polycarbonate 1x18W Non Maintained Prismatic DiffuserWPBHAC118PR W/proof Polycarbonate 1x18W 240 V AC Prismatic DiffuserWPBH218SPR W/proof Polycarbonate 2x18W Sustained Prismatic Diffuser
Note Lamps not included
WeatherforceTM Weatherproof Nexus® Bulkheads with Diecast Base
WPDBHNXS110MOP W/proof Nexus 1x10W Maintained Opal DiffuserWPDBHNXS110MPR W/proof Nexus 1x10W Maintained Prismatic DiffuserWPDBHNXS110NOP W/proof Nexus 1x10W Non Maintained Opal DiffuserWPDBHNXS210SOP W/proof Nexus 2x10W Sustained Opal DiffuserWPDBHCNXS104MOP W/proof Nexus 1x4W Maintained Opal Diffuser
Note Lamps not included
83National Support CentrePh 1300 666 595 • Fax 1300 666 594
WEATHERFORCEWEATHERPROOF
BULKHEADS
Note In a single lamp emergency luminaire the spacings in the C0 plane are proportional to Fig 1. In a twin lamp emergency luminaire one tube is maintained in emergency mode. As a result the second “mains only” tube interferes with the light distribution in several planes. For this reason, all twin lamp fi ttings have C0, C90 and C180 classifi cations as per Fig 2.
Weatherforce 18W Weatherproof Nexus® Bulkheads
Part No. DescriptionWPBHNXS118MPR W/proof Nexus Polycarbonate 1x18W Maintained Prismatic DiffuserWPBHNXS118NPR W/proof Nexus Polycarbonate 1x18W Non Maintained Prismatic DiffuserWPBHNXS218SPR W/proof Nexus Polycarbonate 2x18W Sustained Prismatic Diffuser
Note Lamps not included
Technical Specifi cations
Photometrics & Luminare SpacingsPart No. Classification Mounting Height in Metres 2.1 2.4 2.7 3.0 3.6 4.0 5.0 6.0WPDBH110 C0 D16 12.1 12.6 13.0 13.3 13.9 14.1 14.6 14.6 C90 D12.5 11.5 11.5 11.8 12.1 12.5 12.7 13.0 12.8
WPDBHNXS210SOP C0 D12.5 11.5 11.5 11.8 12.1 12.5 12.7 13.0 12.8 C90 E10 7.8 8.4 9.0 9.4 10.2 10.8 11.4 11.8 C180 D6.3 8.6 8.8 9.0 9.1 9.2 9.2 8.7 7.7
*Nexus versions of the above are the same
C0 C0
C90
C90FIG 1
C180 C0
C90
C90FIG 2
84National Support CentrePh 1300 666 595 • Fax 1300 666 594
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Dimensions
• 1x10W 650mm (L) x 115mm (W) x 110mm (H)• 2x10W 650mm (L) x 185mm (W) x 110mm (H)• 1x18W 706mm (L) x 176mm (W) x 120mm (H)• 2x18W 706mm (L) x 176mm (W) x 120mm (H)* Nexus versions of the above are the same dimensions
Construction
• Body Polycarbonate• Diffuser Moulded Polycarbonate
Weight
• 1x10W 3.5kg• 2x10W 3.5kg* Nexus versions of the above are the same weight
WEATHERFORCEWEATHERPROOF
BULKHEADS
Parts & Accessories
Part No. DescriptionDiffusers21-07026 Polycarbonate prismatic diffuser to suit 10W 21-07027 Polycarbonate opal diffuser to suit 10W21-MPMD007 Prismatic wide body diffuser to suit 18W Weatherforce Battens
LampsCCFL4-5 Lumatec 4W lamp to suit Cold Cathode Weatherforce – pack of 515-00215 Lamp to suit 10W Weatherforce battens
Batteries03-01207 Battery to suit Cold Cathode Weatherforce battens 03-01014 Battery 2 Cell to suit 10W Weatherforce battens03-01015P Battery 3 Cell to suit 18W Weatherforce battens
85National Support CentrePh 1300 666 595 • Fax 1300 666 594
EMERGENCYLIFT CAR BATTENS
Stanilite® Lift Car Emergency Batten Range is designed to comply with the SAA lift code AS1735.
Features
• Emergency duration up to 4 hours• 4 Hour power packs to suit most fl uorescent
4 pin lamps• All battens supplied with bell takeoff connection• Hi-temp NiCad batteries used for all fl uorescent
product
Fluorescent Lift Car Battens
Part No. DescriptionBTL118N-0001 1x18W Non Maintained 4hour 8 cell batteryBTL118M-0001 1x18W Maintained 4hour 8 cell batteryBTL130N-0001 1x30W Non Maintained 4hour 8 cell batteryBTL130M-0001 1x30W Maintained 4hour 8 cell batteryBTL136N-0001 1x36W Non Maintained 4hour 8 cell batteryBTL136M-0001 1x36W Maintained 4hour 8 cell batteryBTL158N-0001 1x58W Non Maintained 4hour 8 cell batteryBTL158M-0001 1x58W Maintained 4hour 8 cell batteryBTL218M-0001 2x18W One Tube Maintained 4hour 8 cell batteryBTL230M-0001 2x30W One Tube Maintained 4hour 8 cell batteryBTL236M-0001 2x36W One Tube Maintained 4hour 8 cell battery
Note Lamps not included
Remote Lift Car Packs
LPR130 30W 4hour 8 cell batteryLPR136 36W 4hour 8 cell batteryLPR218 Twin 18W 4hour 8 cell batteryLPR118-PL4PIN Single 18W 4hour 8 cell battery 4 pin lampLPR218-PL4PIN Twin 18W 4hour 8 cell battery 4 pin lampLPR226-PL4PIN Twin 26W 3hour 8 cell battery 4 pin lampLPR230 Twin 30W 4hour 8 cell batteryLPR236 Twin 36W 4hour 8 cell battery
Inverter/Battery Packs
PP18-8C4H 18W 4hour 8 cell batteryPP30-8C4H 30W 4hour 8 cell batteryPP36-8C4H 36W 4hour 8 cell batteryPP58-8C4H 58W 4hour 8 cell battery
86National Support CentrePh 1300 666 595 • Fax 1300 666 594
Power Supply Units
Part No. DescriptionPS124 12V 6W unit for use with 2x3W lamp assembly – LH236PS404-NB* 12V 40W 4H no break unitPS504* 12V 50W unit for use with 2x50W dichroic lampPS504M 12V 50W maintained unit
* Note: External 12V supply required for normal operation of lamps
Diffuser Kits
26-07048 Diffuser kit to suit 1x30W lift batten 26-PRFBT136 Diffuser kit to suit 1x36W lift batten 26-PREBT58 Diffuser kit to suit 1x58W lift batten 26-PREBT18 Diffuser kit to suit 2x18W lift batten 26-07046 Diffuser kit to suit 2x30W lift batten 26-PREBT36 Diffuser kit to suit 2x36W lift batten
Wire Guards
21-WGFBT136 Wire guard kit to suit 1x36W lift batten 21-WGEBT58 Wire guard kit to suit 1x58W lift batten 21-WGEBT18 Wire guard kit to suit 2x18W lift batten 21-WGEBT36 Wire guard kit to suit 2x36W lift batten
Thomas & Betts emergency lighting products are designed to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Weight
• PS124 5.5Kg• PS504 12.5kg
EMERGENCYLIFT CAR BATTENS
• PS124 310mm (L) x 110mm (W) x 120mm (H)
• PS504 320mm (L) x 310mm (W) x 90mm (H)
• 1X18W 620mm (L) x 65mm (W) x 110mm (H)
• 2X18W 620mm (L) x 105mm (W) x 110mm (H)
• 1X30W 920mm (L) x 70mm (W) x 110mm (H)
• 2X30W 920mm (L) x 125mm (W) x 110mm (H)
• 1X36W 1220mm (L) x 65mm (W) x 110mm (H)
• 2X36W 1220mm (L) x 105mm (W) x 110mm (H)
• 58W 1540mm (L) x 105mm (W) x 110mm (H)* Nexus versions of the above are the same dimensions & weight
Dimensions
Technical Specifi cations
Parts & Accessories
Part No. Description02-01532 Remote battery pack to suit single 18W & 30W battens03-00650 Remote battery pack to suit all battens except 18W & 30W singles14-00061 Battery to suit PS12414-00063 Battery to suit PS404, PS504 & PS504M
87National Support CentrePh 1300 666 595 • Fax 1300 666 594
FLOOD UNITS
Stanilite® emergency fl ood units provide a versatilenon-maintained emergency light source and are especially useful where coverage is required for large open areas. They are also ideal for situations where the ceiling mounted units are diffi cult to install or service.
Features
• Adjustable lamp heads in azimuth and elevation to customise light coverage
• Optional 20W remote mounted fl ood heads available• 12W, 20W & 35W lamp head options• Surface mount electronics
Flood Units
Part No. DescriptionEFL28 Economy Flood Unit 2x8W Non Maintained Plastic Body & Head FL212 Flood Unit 2x12W Non MaintainedFL220 Flood Unit 2x20W Non Maintained FL320 Flood Unit 3x20W Non Maintained FL235 Flood Unit 2x35W Non Maintained
Remote Flood Head
EFLRH6V8W Economy fl ood head remote mount 6V 8WFLRH12V20W Flood Head Remote Mount 12V 20W
Weatherproof Flood Units
WPFL212 W/proof Flood Unit 2x12W Non MaintainedWPFL235 W/proof Flood Unit 2x35W Non Maintained
Flood Nexus® Units
FLNXS212 Nexus Flood Unit 2x12W Non MaintainedFLNXS220 Nexus Flood Unit 2x20W Non Maintained FLNXS235 Nexus Flood Unit 2x35W Non Maintained
Weatherproof Flood Nexus® Units
WPFLNXS212 W/proof Nexus Flood Unit 2x12W Non MaintainedWPFLNXS235 W/proof Nexus Flood Unit 2x35W Non Maintained
Standard Flood
Power Consumption
Unit Voltage Hz Max Amp• Economy Flood Unit 220/240V 50 0.05A• Standard Flood & Weatherproof 220/240V 50 0.13A• Nexus Flood 220/240V 50 0.32A
88National Support CentrePh 1300 666 595 • Fax 1300 666 594
1x8W lamp, appox. 90m2
of emergency light @ 0.2 lux. min.2x8W lamp, appox. 160m2
of emergency light @ 0.2 lux. min.1x12W head appox. 150m2 of
emergency light @ 0.2 lux. min.
2x12W head appox. 270m2 of emergency light @ 0.2 lux. min.
1x35W head appox. 210m2of emergency light @ 0.2 lux. min.
2x35W head appox. 385m2 of emergency light @ 0.2 lux. min.
1x20W head appox. 135m2of emergency light @ 0.2 lux. min.
2x20W head appox. 320m2of emergency light @ 0.2 lux. min.
3x20W head appox. 440m2of emergency light @ 0.2 lux. min.
Technical Specifi cations
Photometrics The photometric data below is calculated for a fl ood unit mounted at 3 metres. The lamp head must be positioned as the drawing below shows:
Construction
Unit Body Lamp & Housing Lens• Economy Flood White moulded fi re 6V 8W halogen Glass retarded ABS – Plastic housing
• 20W Standard White powder coated 12V 20W Halogen GlassFlood & Nexus zinc seal steel – Plastic housing
• 12W & 35W Standard, White powder coated 12V 12W & 35W GlassNexus & Weatherproof zinc seal steel – Chrome plated, aluminium housing
FLOOD UNITS
89National Support CentrePh 1300 666 595 • Fax 1300 666 594
Standard & Nexus® Unit
Parts & Accessories
Part No. DescriptionSealed Beam15-00125 Sealed beam to suit FL21215-00115 Sealed beam to suit FL235
Skirt15-00132 Plastic skirt used for remote mounting – suits EFL28, FL220 & FL320 lamp heads
Wire guardsEFLWGWM Wire guard wall mount to suit economy fl ood21-01284 Wire guard to suit FL212 & FL235
Lamps15-00130 Lamp head to suit EFL2815-00131 Lamp head to suit FL220 or FL32002-01210 Beam assembly 12V 12W – chrome to suit FL21202-01200 Beam assembly 12V 35W – chrome to suit FL235
Batteries 14-00401 Battery to suit EFL2814-00061 Battery to suit FL21214-00064 Battery to suit FL220, FL235 and FL320
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Economy Unit
Dimensions
• Economy Flood 300mm(L) x 90mm(W) x 300mm(H)• Standard Flood 325mm(L) x 90mm(W) x 486mm(H)• Weatherproof 380mm(L) x 180mm(W) x 415mm(H)
FLOOD UNITS
90National Support CentrePh 1300 666 595 • Fax 1300 666 594
SATURN™ CIRCULAREMERGENCY ANDNON EMERGENCY
SaturnTM Economy Emergency
Part No.SA128M2D pmaL cnI deniatniaM D2 W82x1 ralucriC nrutaS SA132M pmaL cnI deniatniaM W23x1 ralucriC nrutaS
240V AC SaturnTM Non Emergency
SAAC132 CA V042 W23x1 ralucriC nrutaS SAAC128-2D CA V042 W82x1 ralucriC nrutaS
SaturnTM Nexus® Emergency
SANXS128M2D Nexus Saturn Circular 1x28W 2D Maintained Inc LampSANXS132M pmaL cnI deniatniaM W23x1 ralucriC nrutaS suxeN
Technical Specifi cations
Photometrics & Luminaires Spacings
Product Classification Mounting Height in Metres 2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.0SA128M2D C0 D12.5 11.5 11.5 11.8 12.1 12.4 12.5 12.7 12.9 13.0 12.8Wall Mount C90 D10 10.2 10.6 10.9 11.1 11.3 11.4 11.5 11.6 11.6 11.2SA128M2D C0 D25 14.2 14.7 15.3 15.7 16.1 16.5 16.9 17.3 17.7 18.1Ceiling Mount C90 D25 14.2 14.7 15.3 15.7 16.1 16.5 16.9 17.3 17.7 18.1SA132M C0 D20 13.1 13.6 14.1 14.5 14.8 15.1 15.5 15.8 16.1 16.4Ceiling Mount C90 D20 13.1 13.6 14.1 14.5 14.8 15.1 15.5 15.8 16.1 16.4
*Nexus versions of the above have the same data
noitpircseD
The Stanilite® Saturn™ range of emergency fi ttings has been designed to deliver the effi ciency and reliability of linear emergency battens into a more architecturally pleasing circular emergency fi tting.
Features
• Suitable for wall or ceiling installation • Superior photometric performance higher light
output per unit resulting in fewer fi ttings being required
• Hi-Temp rated nicad batteries as standard• Colour bond gear tray, white powder coated zinc seal
steel base with opal acrylic diffusers• Surface mount electronics • 28W 2D or 32W circular lamp options
91National Support CentrePh 1300 666 595 • Fax 1300 666 594
Dimensions
Parts & Accessories
Part No. Description 03-01077 Battery to suit Saturn 15-00806 Lamp to suit 28W Saturn 15-00807 Lamp to suit 32W Saturn
Saturn Circular
Construction
• Base White Powder Coated Zinc Seal Steel• Gear Tray 0.9mm Colour Bond• Diffuser Opal Acrylic
Thomas & Betts emergency lighting products are tested to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
SATURN™ CIRCULAREMERGENCY ANDNON EMERGENCY
32.0 12.0
372.
0 D
IA.
148.0 APPROX
LED INDICATOR PUSH BUTTON TEST
92National Support CentrePh 1300 666 595 • Fax 1300 666 594
EMERGENCY POWER PACKS
Stanilite® Emergency Power Packs retrofi t into T5, T8, PL and Circular lamped luminaries. Each pack is suitable to convert one fl uorescent lamp in a general purpose luminare to an emergency light. Battery packs included with each power pack.
Features
• Available to run many lamp sizes in NonMaintained and Maintained mode of operation.
T8 Economy Power Packs
Part No. Description Case Battery Pack Battery Type (included) PackEPP18M Economy Inverter Pack 18W T8 Maintained A 03-01208 5x Sub C NiCadEPP18N Economy Inverter Pack 18W T8 Non Maintained A 03-01208 5x Sub C NiCadEPP36M Economy Inverter Pack 36W T8 Maintained A 03-01209 7x Sub C NiCad
T8 Premium Power Packs
PP10 Premium Inverter Pack 10W T8 A 03-01014P 2xD NiCadPP18 Premium Inverter Pack 18W T8 A 03-01015P 3xD NiCadPP36 Premium Inverter Pack 36W T8 A 03-01001P 4xD NiCadPP58 Premium Inverter Pack 58W T8 A 03-01013P 5xD NiCad
PL & Circular Lamp Power Packs
PP13-PL4PIN Premium Inverter Pack 13W PL 4-PIN A 03-01001P 4xD NiCadPP16-2D4PIN Premium Inverter 16W 2D 4-PIN A 03-01015P 3xD NiCadPP18L-PL4PIN Premium Inverter 18W PL L 4-PIN A 03-01001P 4xD NiCadPP18-PL4PIN Premium Inverter 18W PL 4-PIN A 03-01015P 3xD NiCadPP26D/E-PL4PIN Premium Inverter 26W D/E PL 4-PIN lamp A 03-01001P 4xD NiCadPP26-PL4PIN Premium Inverter 26W T/E PL 4-PIN lamp A 03-01001P 4xD NiCadPP28-2D4PIN Premium Inverter 28W 2D 4-PIN lamp A 03-01077 4xD NiCadPP32-CIR Premium Inverter 32W Circular Lamp A 03-01077 4xD NiCadPP32T/E-PL4PIN Premium Inverter 32W T/E PL 4-PIN lamp A 03-01001P 4xD NiCadPP36L-PL4PIN Premium Inverter 36W PLL 4-PIN lamp A 03-01001P 4xD NiCad
PP32-CIR
93National Support CentrePh 1300 666 595 • Fax 1300 666 594
T5 Power Packs
Part No. Description Case Battery Pack Battery Type (included) PackPP14-T5 Inverter Pack 14W T5 A 03-01015P 3xD NiCadPP21-T5 Inverter Pack 21W T5 A 03-01001P 4xD NiCadPP28-T5 Inverter Pack 28W T5 A 03-01013P 5xD NiCadPP54-T5 Inverter Pack 54W T5 A 2 x 03-01015P 6xD NiCad
Nexus® Power Packs
PPNXS18 Nexus Inverter Pack 18W T8 B 03-01015P 3D NiCadPPNXS36 Nexus Inverter Pack 36W T8 B 03-01001P 4D NiCadPPNXS58 Nexus Inverter Pack 58W T8 B 03-01013P 5D NiCadPPNXS13-PL4PIN Nexus Inverter Pack 13W PL 4-PIN B 03-01001P 4xD NiCadPPNXS18D/E-PL4P Nexus Inverter Pack 18W PL 4-PIN B 03-01015P 3D NiCadPPNXS26-PL4PIN Nexus Inverter Pack 26W PL 4-PIN B 03-01001P 4xD NiCadPPNXS28-2D4PIN Nexus Inverter Pack 28W 2D 4-PIN B 03-01077 4xD NiCadPPNXS32T/E-PL4P Nexus Inverter Pack 32W T/E PL 4-PIN B 03-01077 4xD NiCadPPNXS38-2D4PIN Nexus Inverter Pack 38W 2D 4-PIN B 03-01013P 5xD NiCadPPNXS14-T5 Nexus Inverter Pack 14W T5 B 03-01015P 3xD NiCadPPNXS21-T5 Nexus Inverter Pack 21W T5 B 03-01001P 4xD NiCadPPNXS28-T5 Nexus Inverter Pack 28W T5 C 03-01013P 5xD NiCadPPNXS35-T5 Nexus Inverter Pack 35W T5 C 2 x 03-01015P 6xD NiCadPPNXS39-T5 Nexus Inverter Pack 39W T5 C 03-01013P 5xD NiCadPPNXS54-T5 Nexus Inverter Pack 54W T5 C 2 x 03-01015P 6xD NiCad
Note All Power Packs include the Battery Pack. Other specialty packs available on request.
EMERGENCY POWER PACKS
A
B
HB
H
AW
94National Support CentrePh 1300 666 595 • Fax 1300 666 594
Battery Packs
HA
B
HA
BW
Note lead length for all battery packs is 200mm
Power Pack Dimensions
MountingCase HoleType Dimensions Centres• A 225mm (L) x 42mm (W) x 37mm (H) 210• B 236mm (L) x 47mm (W) x 41mm (H) 226• C 268mm (L) x 48mm (W) x 41mm (H) 260
Construction
• Body White Colour Bond Steel
Thomas & Betts emergency lighting products are designed to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Battery Pack Dimensions
Part No. Type Length (A) Mounting Hole Width (W) Height (H) Centres (B)• 03-01077 1 170mm 144mm 60mm 32mm• 03-01208 1 163mm 143mm 45mm 25mm• 03-01209 1 210mm 188mm 45mm 25mm• 03-01001P 2 280mm 264mm – 32mm• 03-01013P 2 340mm 324mm – 33mm• 03-01014P 2 150mm 134mm – 32mm• 03-01015P 2 220mm 204mm – 32mm
EMERGENCY POWER PACKS
Type 1
Type 2
95National Support CentrePh 1300 666 595 • Fax 1300 666 594
The Thomas & Betts range of Emergency Test Timers provide a cost effective way to complywith AS2293.2 1998 testing requirements for building installations. Constructed with a tough polyester box enclosure and designed for easy installation into electrical distribution boxes oras a stand-alone unit.
Features
• High quality electronic timer – suitable for either 120min commissioning test, or 90 minute standard discharge testing
• Controls up to 4 circuits • Active indication • Automatically reverts to the normal state at
conclusion of a discharge test or can be manuallyre-set
Economy Test Units
Part No. DescriptionELTUN-1 Emergency Light Test Unit Enclosed with Spring SwitchELTUN-2 Emergency Light Test Unit Enclosed with Key Switch
Premium Test Units
ELTU Emergency Light Test Unit Standard TimerELTU1 Emergency Light Test Unit 35mm DINELTU2 Emergency Light Test Unit Standard Reset Plate MountedELTUDT Emergency Light Test Unit with Delay Timer
EMERGENCY TEST TIMERS& LOG BOOK
ELTUN-1
Thomas & Betts emergency lighting products are designed to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Log Book
Emergency Light Maintenance Logbook with a durable hard cover for allAS2293.2 testing and maintenance requirements.
LOGBOOK Emergency Lighting Maintenance Logbook
LOGBOOK
NEXUS LX® NETWORKCOMPONENTS
Stanilite Nexus LX® is the market leading emergency lighting monitoring system. Nexus LX® allows the user to easily manage the installation, commissioning, testing and maintenance of emergency lighting systems.
Features
• Manage the installation and removal of components • Assign fi ttings to groups• Ensure tests are preformed properly • Log test results and print as required • Cost effectively test and monitor the system• Manage maintenance activities • Prepare reports
For further information on the Nexus LX® Evacuation Lighting management System, refer to the Nexus LX® catalogue.
Nexus® Servers & Components
Part No. DescriptionComplete Server Packs(PC, Software, InterfaceCard & NUN)NXS2000SERVER Nexus 2000 User Pack Including Server*NXSLXSERVERLCD Nexus LX Server User Pack with 17’ LCD Monitor
Server Only NXS2000LT Nexus 2000 Laptop*NXS2000PC Nexus 2000 PC*NXSLXPCLCD Nexus LX PC with 17’ LCD Monitor
Server Pack – No PC NXS2000LP Nexus 2000 Laptop Pack Includes Software, Interface Card, NUNNXS2000SP Nexus 2000 SPL Pack Includes Software, Interface Card, NUN
Network Utility NodeNXS2000NUN Nexus Network Node Utility Includes Power Supply
Remote Dial KitNXS2000RDK Nexus Remote Dial Kit Includes SLTA10, Modem, Cable, Power Supply
*Note Various upgrades are available to the standard server eg: LCD monitor.
National Support CentrePh 1300 666 595 • Fax 1300 666 594 96
Note image is representation only. Actual unit supplied may vary
Thomas & Betts emergency lighting products are designed to comply with AS2293 and meet relevantAustralian EMC Standards. Due to ongoing product development, specifi cation changes may result.
Nexus LX® Routers
Part No. DescriptionNXSFTR1 Router Fibre/TP (78Kbps) 880nm-3km, Power SupplyNXSFTR2 Router Fibre/TP (78Kbps) 1320nm-30km, Power SupplyNXSFTR3 Single Mode Fibre Router TPT/XF-78, Power SupplyNXSNCB1 Router NCB 78TPT to 10MBPS EthernetNXSNCB2 iLon 600 LonWorks/IP Server TP/FT-10NXSROUT Nexus Router Kit 78/78NXSROUT/1 Nexus Router Kit 78/1.25NXSROUT/2 Nexus Router TPXF78 to FTT10A
National Support CentrePh 1300 666 595 • Fax 1300 666 594 97
Nexus LX® Cable
Part No. DescriptionNXS-1PS/A-100 Cable Data Twisted Pair Screen 100m RollNXS-1PS/A-500 Cable Data Twisted Pair Screen 500m Roll
Nexus LX® General Purpose Nodes Part No. DescriptionGPN-1D General Purpose Node 4 Ch Digital Input GPN-LM-1D/1A General Purpose Node Lighting Monitor – one data, one analogueGPN-LM-1D/3A General Purpose Node Lighting Monitor – one data, three analogueGPN-LM-4A General Purpose Node Lighting Monitor – four analogueGPN-MFD General Purpose Node Mains Fail DetectGPN-LDR General Purpose Node LDR ASSY GPN-LM General Purpose Node Lighting Monitor GPN-LMRA General Purpose Node Lighting Monitor with Relay AlarmGPN-UPS General Purpose Node UPS Monitoring
NEXUS LX® NETWORKCOMPONENTS
98National Support CentrePh 1300 666 595 • Fax 1300 666 594
AS2293 DESIGNCONSIDERATIONS
The AS2293 evacuation lighting standard looks at an installation in two parts. Firstly illuminated Exit signs to indicate a path of egress (escape) and secondly emergency lighting to provide a minimum light level throughout an area to enable occupants to transverse through that area. While emergency lighting is not required to operate while mains power is available, all Exits must be luminated regardless of mains connection. Emergency fi ttings are available in several different types to suit various applications. Each fi tting has a photometric classifi cation that is used with a photometric chart to determine spacings for given mounting heights. The resultant spacings provide the required standard minimum of 0.2Lux of emergency lighting in the determine area. For large areas multiple fi ttings are simply mounted in a grid determined by the calculated spacings. Batten fi ttings have different spacings in the “X” (C0 & C180) and “Y” (C90) planes due to the shape of the lamp and refl ective surfaces. It is important that batten’s are therefore correctly orientated. If you need assistance with the design of an evacuation lighting system, please call Thomas & Betts on 1300 666 595.
Classifi cation Mounting Height in Metres 2.1 2.4 2.7 3.0 3.3 3.6 4.0 4.5 5.0 6.0C2.0 4.1 4.1 4.1 3.9 3.7 3.3 2.6C2.5 4.5 4.6 4.6 4.5 4.4 4.2 3.7 2.8C3.2 5.0 5.1 5.2 5.2 5.2 5.1 4.8 4.3 3.4C4 5.4 5.6 5.7 5.8 5.8 5.8 5.7 5.3 4.8 2.6C5 5.9 6.1 6.3 6.4 6.5 6.5 6.5 6.3 6.0 4.8C6.3 6.3 6.6 6.8 7.0 7.3 7.3 7.3 7.3 7.1 6.4C8 6.8 7.2 7.4 7.7 7.9 8.0 8.2 8.3 8.2 7.8C10 7.3 7.7 8.0 8.3 8.6 8.8 9.0 9.1 9.2 9.1C12.5 7.8 8.2 8.6 8.9 9.2 9.5 9.8 10.0 10.2 10.3C16 8.3 8.8 9.3 9.7 10.0 10.3 10.7 11.0 11.3 11.6C20 8.9 9.4 9.9 10.3 10.7 11.1 11.5 12.0 12.3 12.8C25 9.4 10.0 10.5 11.0 11.5 11.9 12.4 12.9 13.4 14.0C32 10.0 10.7 11.3 11.8 12.3 12.8 13.4 14.0 14.5 15.4C40 10.6 11.3 12.0 12.6 13.1 13.6 14.3 15.0 15.6 16.6C50 11.3 12.0 12.7 13.4 14.0 14.5 15.2 16.0 16.7 17.9D3.2 6.5 6.6 6.6 6.5 6.4 6.2 5.8 5.1 4.1D4 7.2 7.3 7.3 7.3 7.3 7.2 6.9 6.5 5.8 3.1D5 7.8 8.0 8.1 8.2 8.2 8.2 8.0 7.7 7.3 5.7D6.3 8.6 8.8 9.0 9.1 9.2 9.2 9.2 9.0 8.7 7.7D8 9.4 9.7 9.9 10.1 10.2 10.3 10.4 10.3 10.2 9.5D10 10.2 10.6 10.9 11.1 11.3 11.4 11.5 11.6 11.6 11.2D12.5 11.5 11.5 11.8 12.1 12.4 12.5 12.7 12.9 13.0 12.8D16 12.1 12.6 13.0 13.3 13.6 13.9 14.1 14.6 14.6 14.6D20 13.1 13.6 14.1 14.5 14.8 15.1 15.5 15.8 16.1 16.4D25 14.2 14.7 15.3 15.7 16.1 16.5 16.9 17.3 17.7 18.1D32 15.4 16.1 16.7 17.2 17.6 18.0 18.5 19.1 19.5 20.2D40 16.7 17.4 18.0 18.6 19.1 19.6 20.1 20.8 21.3 22.1D50 18.0 18.7 19.4 20.1 20.7 21.2 21.8 22.5 23.2 24.2D63 19.4 20.3 21.1 21.8 22.4 23.0 23.7 24.5 25.2 26.4E10 7.8 8.4 9.0 9.4 9.8 10.2 10.8 11.2 11.4 11.8E12.5 8.0 8.8 9.4 10.0 10.4 11.0 11.4 12.0 12.4 13.0E16 8.4 9.2 9.8 10.6 11.0 11.6 12.2 12.8 13.4 14.4E20 8.8 9.6 10.4 11.0 11.6 12.2 13.0 13.6 14.4 15.4E25 9.0 10.0 10.8 11.4 12.2 12.8 13.6 14.4 15.2 16.6E32 9.4 10.2 11.2 12.0 12.8 13.4 14.4 15.4 16.2 17.8
99National Support CentrePh 1300 666 595 • Fax 1300 666 594
CONTACT US
National Support Centre Ph: 1300 666 595Fax: 1300 666 594Email: [email protected]
NSW 23A Nyrang St Lidcombe NSW 2141Ph: 02 9749 8407Fax: 02 9749 8401
WA2/15 Walters Drive Herdsman WA 6017Ph: 08 9445 8804Fax: 08 9445 8806
VIC2/13-15 Brough StSpringvale VIC 3171Ph: 03 8558 8101Fax: 03 8558 8120
QLD 26 Turbo Drive Coorparoo QLD 4151Ph: 1300 666 595Fax: 1300 666 594
SA86a Richmond Road Keswick SA 5035Ph: 08 8292 4599Fax: 08 8292 4500
NEWCASTLE Ross Joice Agencies 109 Broadmeadow Road Broadmeadow NSW 2292Ph: 02 4961 4433Fax: 02 4961 2498
CANBERRA Illuminating Solutions 26 Jukes StHackett ACT 2602Ph: 02 6247 4555Fax: 02 6247 4777
TASMANIA WP Martin 85 Elizabeth StLaunceston TAS 7250Ph: 03 6331 5545Fax: 03 6331 4256
NEW ZEALAND Electrical Supply Corp 4-8 Mainstreet Place Hamilton NZ 2001Ph: +647 849 9119Fax: +647 849 1181
Thomas & Betts Agencies
Thomas & Betts Branches