Emergency exit device EN 179 - Hafele

AH 2.46 New products and systems: www.hafele.com

We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.

Locking and SecurityInformation

2

Emergency exit device EN 179

Panic exit device EN 1125

The standard cover devices to be used in

emergency situations if people are familiar with

the emergency exit and whose hardware. In this

situation a panic is most unlikely to develop. Lever

handle operated escape mortise locks or push

pads may used therefore.

The standard cover devices to be used in panic

situations if people are not familiar with the

emergency exit and whose hardware but must be

able to open the hardware intuitive. An horizontal

operated touch bar is here required.

AH 2.47New products and systems: www.hafele.com

We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.

Locking and SecurityPanic Exit Device

2

PED 100 Accessories

PED 100 Panic exit device

• Area of application: For fire resistant doors• Material: Touchbar mechanism: Steel• Colour: Touchbar mechanism: Black• Finish: Touchbar mechanism: Powder coated• Version: With cylinder aperture• Standard: EN 1125 in conjunction with approved accessories• For door width: <1400 mm• Door weight: <200 kg• Backset A: 65 mm• Distance B: 72 mm• Lever follower: 9 mm

Material Finish Colour Cat. No.

Bar: Steel Powder coated Bar: Red 901.02.439

Bar: Stainless steel Matt – 903.03.010

In compliance with EN 1125

Lever handle For outer side

Knob For outer side

• Area of application: Suitable for PED 100• Colour: Black

Cat. No.

Lever handle 911.52.126

• Area of application: Suitable for PED 100• Colour: Black

Cat. No.

Knob 911.52.127


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.


2

PED 210 Panic exit device

PED 200 Panic exit device With key action

• Area of application: For fire resistant doors• Material: Touchbar mechanism: Steel• Colour: Cover: Black• Finish: Touchbar mechanism: Powder coated• Version: Basic module• Standard: EN 1125 in conjunction with approved accessories• For door width: <1300 mm• Door weight: <200 kg• Lever follower: 8 mm

MaterialChất liệu

FinishMàu hoàn thiện

ColourMàu sắc

Cat. No.Mã số

Bar: SteelThanh: Thép

Powder coated Bar: Red 901.02.449

Bar: Stainless steelThanh: Inox

Matt – 903.03.014

Vertical locking action, with key change

• Area of application: For fire resistant doors• Material: Touchbar mechanism: Steel• Colour: Cover: Black• Finish: Touchbar mechanism: Powder coated• Version: Basic module with vertical locking action• Standard: EN 1125 in conjunction with approved accessories• For door height: <2400 mm• For door width: <1300 mm• Door weight: <200 kg• Lever follower: 8 mm

Material Finish Colour Cat. No.Bar: Steel Powder coated Bar: Red 901.02.459Bar: Stainless steel Matt – 903.03.016


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.


2

PED 200 and PED 210 Accessories In compliance with EN 1125

Lever handle For outer side

Knob For outer side

Dogging device

Micro switch

Order referenceSpindle supplied.42

45

36

5413

6

• Area of application: Suitable for PED 200 and PED 210• Colour: Black

Cat. No.

Knob 911.52.127

• Area of application: Retrofitting the "permanent open function" on panic doors, suitable for PED 200 and PED 210

Cat. No.

Dogging device 909.09.907

• Area of application: Acoustic alarm generator activates an alarm when panic doors are operated, suitable for PED 200 and PED 210

Micro switch 909.09.908

Order referenceSpindle supplied.

42

69

36118

5413

6

• Area of application: Suitable for PED 200 and PED 210• Colour: Black

Cat. No.

Lever handle 911.52.126

Cat. No.


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.


2

Intumescent seal For fire resistant and smoke control doors

Top keep For aluminium doors

Top keep For plastic doors

• Area of application: Fire resistant and smoke control doors• Material: Graphite

Cat. No.

Seal 901.02.393

• Area of application: For top shoot bolt, on aluminium doors

Keep 911.52.116

• Area of application: For top shoot bolt, on plastic doors

Keep 911.52.117

Cat. No.

Cat. No.


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.


2

Mounting sets overview For glass door installation

For the installation on glass doors, mounting sets are available to suit the modular panic exit devices.

X = One set from A, B or C is required. XX = Two sets from A, B or C are required.O = One set each is required.

Glass preparation details

Mounting options

Necessary glass preparation

3.1, 4

1.1,2, 3.1, 3.2,4

1.1,2, 3.1, 4

1.1,1.2, 2,3.1, 4

1.1,1.2,2, 3.1, 3.2,4

1.1,2, 3.1, 3.2, 4

1.1, 1.2, 2, 3.1, 3.2, 4

AFor mounting blank escutcheons on glass doors

X X X X X XX XX

BFor glass door installation, DIN left

X X X X X XX XX

CFor glass door installation, DIN right

X X X X X XX XX

DFor mounting shoot bolts on glass doors

O O O O O

EFor glass installation, central lock

OOOO

FFor glass installation, top lock

OOO

GFor shoot bolt

O O O O O


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.


2

Mounting set A For mounting blank escutcheons on glass doors

Mounting set B For glass door installation, DIN left

Mounting set For glass door installation, DIN right

Mounting set D For mounting shoot bolts on glass doors

17

814

511

913

9 37

q9 • Area of application: For installation on glass doors

• Material: Aluminium• Colour: Stainless steel coloured• Finish: PVD• Version: Modular system

Cat. No.

Mounting set A 909.09.900

17

8

q9

5

170

119

36

9

46

17

8

145

119

13

9 37

q9

• Area of application: For installation on glass doors• Material: Aluminium• Colour: Stainless steel coloured• Finish: PVD• Version: Modular system

Mounting set B 909.09.901

17

8

145

119

13

9 37

q9

17

8

q9

5

170

119

36

9

46


Mounting set C 909.09.902

17

8

80 4810

9 29

q9


Mounting set D 909.09.903

Cat. No.

Cat. No.

Cat. No.


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.


2

Mounting set EFor glass installation, central lock

Mounting set G

For shoot bolt

Accessories for glass installation PED 200 and PED 210

Lever handle For outer side of glass doors


Cat. No.Mounting set E 909.09.90417

8 728

50 3010

9

4149

13

50 3010

35

q9

• Area of application: For installation on glass doors• Material: Stainless steel• Version: Modular system

Cat. No.Mounting set G 909.09.906

• Area of application: Suitable for PED 200 and PED 210 on glass doors

• Colour: Black

Cat. No.Lever handle 911.52.122

Mounting set F For glass installation, top lock

28 17

9

27

1311

33.5


Cat. No.Mounting set F 909.09.905


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.


2

max. door leaf height b

max. door leaf width a

Installation in rebated doors

Installation in flush doors

A - Basic unit 1: Panic lock

B - Basic unit 2: Lever handle

C - Basic unit 3: Single profile cylinder

D - Basic unit 4: Latch parts and vertical

rod type touchbar

Features

• For rebated or flush doors

• For 1-leaf and 2-leaf doors

• For timber or steel doors

• Suitable for application in escape and rescue routes

• Suitable for DIN left and right hand

• Certified according to EN 1125, Classification 3-7-5-1-1-3-2-2-A

• The length of the touchbar must be at least 60 % of the

effective door opening

• Suitable for door leaf width (a) up to 1500 mm

• Suitable for door leaf height (b) up to 2650 mm

Function

• Locking function:

Lever handle (basic unit 2) can be locked by single

profile cylinder (basic unit 3): access not possible from the outside

• Opening of the door from the inside by pushing the touchbar

• Opening the door from the outside optionally possible by lever

handle or by lever handle and single profile cylinder

Note

• Basic unit 1 does not work with basic unit 3 alone:

Single profile cylinders

• Basic unit 1 works with

- Basic unit 2: Lever handle only

- Basic unit 2: Lever handle +

- Basic unit 3: Single profile cylinder

Panic exit device


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.


2

Locking version for single leaf doors

Inside Basic unit 1 + touchbar (order separately)

Outside –

Locking version 1


Outside Basic unit 2

Locking version 2



Basic unit 3 + cylinder rosette (order separately)

Locking version 3


Basic unit 4

Outside –

Locking version 4


Basic unit 4


Basic unit 3 + cylinder rosette (order separately)

Locking version 5

Basic unit 1+2+3+4

Basic unit 1+4

Basic unit 1

Basic unit 1+2

Basic unit 1+2+3


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.


2

Locking version for double leaf doors

Inactive leaf

Basic unit 1+4

Locking version 6

Inactive leaf Active leaf


Basic unit 1 + touchbar (order separately)

Basic unit 4 –

Outside – –

Active leaf

Basic unit 1

Locking version 7




Basic unit 4 –

Outside – Basic unit 2

Inactive leaf

Basic unit 1+4

Active leaf

Basic unit 1+2

Inactive leaf

Basic unit 1+4

Active leaf

Basic unit 1

Locking version 8


Inside Basic unit 1 + touchbar (order separately


Basic unit 4 –

Outside – Basic unit 2

– Basic unit 3 + cylinder rosette(order separately)


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.


2

Base unit 1: Panic lock

Features





• Prepared for single profile cylinder

• Certified according to EN 1125:97

Technical data

• Lever follower: - 8 mm

• Distance (b): 50 mm

Supplied with

2 Striking plates

1 Set of fixing material

1 Set of installation instructions

Switching DIN left/right hand and locking the latch

Housing Steel grey lacquered

Internal housing Steel yellow chromatized

Latch Stainless steel

Lever follower Zinc alloy

Cat. No. 911.52.272

5


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.


2

Touchbar

Basic unit 2: Lever handle

Features

• Suitable for basic unit 1: Panic lock

Technical data

Diameter: 25 mm

Features

• Lever handle aperture part with rosette and square spindle

Technical data

Square spindle: - 8 mm

Supplied with

Fixing material

Finish 1000 mm 1200 mm 1500 mm

Stainless steel matt 911.52.279 911.52.280 911.52.281

Lever handle aperture part Zinc alloy grey lacquered

Rosette Plastic grey

Square spindle Zinc yellow chromatized

Cat. No. 911.52.287


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.


2

Basic unit 3: Single profile cylinder

Cylinder rosette

Features


• Only in connection with basic unit 2: Lever handle insertable

• With 5 pin tumblers

• Follower adjustable to 8 positions

• Single profile cylinder: Brass nickel plated matt,

glass bead blasted

Fixing

Length A results from:

Door leaf thickness + 11 mm + cylinder rosette

Supplied with

1 Single profile cylinder

3 Nickel plated steel keys

1 Fixing screw

Length A = external length of cylinder

Features

• Suitable for basic unit 3: Single profile cylinder

Supplied with

Fixing material

Finish Cat. No.

Plastic grey 911.52.292

Length A Length B Length C Cat. No.

27.5 mm 10 mm 37.5 mm 916.00.601 31.5 mm 41.5 mm 916.00.602 35.5 mm 45.5 mm 916.00.603 40.5 mm 50.5 mm 916.00.604 55.5 mm 65.5 mm 916.00.605 60.5 mm 70.5 mm 916.00.606 65.5 mm 75.5 mm 916.00.607


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.


2

Features






• Suitable for door leaf height up to 2,650 mm

Supplied with

2 Latch parts and covers

2 Vertical rod type touchbars top and bottom

3 Bar guides

2 Striking plates

1 Set of fixing material

1 Set of installation instructions

Basic unit 4: Latch parts and vertical rod type touchbar

Finish

Covers Steel grey lacquered

Latch parts Steel yellow chromatized

Latch Stainless steel

Vertical rod type touchbars Steel grey lacquered

Bar guides Plastic grey

Cat. No. 911.52.302


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.


2

Area of application: For rebated or flush, single or double wooden or

steel doors

Suitable for: Fire resistant and smoke control doors

Door width: 840 – 914 mm

Door thickness: 43.9 – 50.8 mm

Mounting: For DIN left and DIN right hand use

UL listed for ANSI A 1563

Function

Opening of door from inside: By pushing the touchbar

Opening of door from outside (optional): By activating the lever

handle. Key locks or unlocks lever handles (ANSI cipher bit function)

Inside:

- 1 Touchbar A

Outside:

- 1 Lever handles with round rosette E

Product components for single doors Product components for double doors

Panic exit device

Inside:

- 1 Touchbar with vertical locking rod B

Outside:

- 1 Lever handle on backplate D

Inside:

- Action leaf: 1 Touchbar A

- Inactive leaf: 1 Touchbar with vertical locking rod B

and 1 striking plate C

Outside:

- 1 Lever handle on backplate D or


Inside:

- Action and inactive leaf: Touchbar with vertical locking rod B each

Outside:



We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.


2

Packing: 1 pc.

Supplied with

1 Touchbar

1 Striking plate

B Touchbar with vertical locking rod

A Touchbar

Cat. No.

911.56.036

Cat. No.

911.56.037

Packing: 1 pc.


We

rese

rve

the

right

to a

lter

spec

ifica

tions

with

out n

otic

e.


2

C Striking plate

E Lever handle with round rosette

Area of application

For double doors inside: Active leaf with touchbar A,

inactive leaf with touchbar with vertical locking rod B

Cat. No.

Striking plate 911.56.024

Cat. No.

Lever handle with round rosette 911.56.038

Packing: 1 pc.

Packing: 1 pc.

D Lever handle on backplate and cylinder

Cat. No.

Lever handle with round rosette 911.56.028

Packing: 1 pc.

Documents

Emergency exit device EN 179 - Hafele