2
...................................... Emergency Escape Breathing Apparatus Concorde-Corodex Group Fire Protection, Water & Wastewater Treatment and Environmental Specialists P.O.Box: 12282 Dubai, UAE Tel: +971 4 3472900 Fax: +971 4 3472796 E-mail: [email protected], www.corodex.com Distributors Afghanistan Algeria Azerbaijan Egypt Iraq Kazakhstan Kuwait Nigeria Pakistan U.A.E. Abu Dhabi: Corodex Electromechanical Contracting Tel: +971 2 6668771 Fax: +971 2 6667863 Concorde Trading Company Tel: +971 2 6668770 Fax: +971 2 6667863 Al Jaddaf Electromechanical Tel: +971 2 5503331 Fax: +971 2 5503332 Corodex Industries Tel: +971 2 5503331 Fax: +971 2 5503332 Bristol Vehicle Manufacturing Division Tel: +971 2 5575551 Fax: +971 2 5575550 Al Ain: Concorde Trading Company Tel: +971 3 37212515 Fax: +971 3 37211254 Sharjah: Corodex Agencies Tel: +971 6 5430800 Fax: +971 6 5430801 Dubai Industrial Gases (DIG) Tel: +971 6 5347700 Fax: +971 6 5347007 Dubai: Corodex Industries Tel: +971 4 3479895 Fax: +971 4 3479896 Bristol Gases Tel: +971 4 3472436 Fax: +971 4 3472441 Corodex Trading Company Tel: +971 4 3472900 Fax: +971 4 3472796 Corodex Marine Tel: +971 4 3472164 Fax: +971 4 3472184 Corodex Agencies (Fire Protection & Automation) Tel: +971 4 3472530 Fax: +971 4 3472501 Bristol Fire Engineering Tel: +971 4 3472426 Fax: +971 4 3472363 Corodex Electromechanic Co. (LLC) Tel: +971 4 3472900 Fax: +971 4 3470059 Corodex Agencies (Safety & Rescue) Tel: +971 4 2668966 Fax: +971 4 2624617 World Wide Qatar: International Gulf Trading Company Tel: +974 44694340 Fax: +974 44694467 Jordan: Gulf Sail For Water Technology Tel: +962 6 5542968 Fax: +962 6 5542967 Oman: Integrated Engineering Solutions (IES) Tel: +968 24700349 Fax: +968 24700168 Saudi Arabia: Concorde Advance Technical Solutions: Tel: +966 12 698 4993 Fax: +966 12 698 4991 UK: EFLO International Tel: + 44 (0) 1295 817623 Fax: + 44 (0) 872 1156890 Marine Division P.O.Box 12282 Dubai, UAE Tel: +971 4 3472164 Fax: 00971 4 3472184 E-mail: [email protected], www.corodex-marine.com ...................................... Hood Information: Material Thickness Splicing system Splicing resistance Vizor Exhalation valve Exhalation valve/opening pressure Inner mask Neck Seal Hose working pressure Hose burst pressure Flame reterdant PVC coated fabric min 0.5mm Electro-frequency 0.3 bar Flame reterdant transparent PVC, thickness 0.5mm Spring loaded with silicone diaphragm 1.5 – 2 mbar Natural rubber Natural latex 10 bar 30 bar EN 1146/2005 ISO 23269-1/2008 SOLAS 74 including amendments 2000 (IMO Res.MSC.99 (73), Reg. II-2/13,3.4 and 13,4.3 International Code of Fire Safety System (IMO Res.MSC.98 (73), Chapter 3, Para.2.2 MSC/Circ.849- Guidelines for the performance, location, use and care of Emergency Escape Breathing Devices (EEBD) F-Standards Met 58 cm Width Total Height 22 X 15 cm G-Dimensions/Weight 5.7 kg 3.7 kg 6.7 kg 4.7 kg Net weight with steel and aluminium cylinder Net weight with carbon composite cylinder Fully charged weight with steel and aluminium Fully charged weight with carbon composite cylinder

Emergency Escape Breathing Apparatus - Corodex … · Emergency Escape Breathing Apparatus Concorde-Corodex Group ... E-mail: [email protected], Distributors Afghanistan Algeria Azerbaijan

Embed Size (px)

Citation preview

Page 1: Emergency Escape Breathing Apparatus - Corodex … · Emergency Escape Breathing Apparatus Concorde-Corodex Group ... E-mail: info@corodex.com, Distributors Afghanistan Algeria Azerbaijan

......................................

Emergency Escape Breathing Apparatus

Concorde-Corodex GroupFire Protection, Water & Wastewater Treatment and Environmental Specialists

P.O.Box: 12282 Dubai, UAE Tel: +971 4 3472900 Fax: +971 4 3472796E-mail: [email protected], www.corodex.com

DistributorsAfghanistan

Algeria

Azerbaijan

Egypt

Iraq

Kazakhstan

Kuwait

Nigeria

Pakistan

U.A.E.Abu Dhabi:

Corodex Electromechanical ContractingTel: +971 2 6668771 Fax: +971 2 6667863Concorde Trading CompanyTel: +971 2 6668770 Fax: +971 2 6667863Al Jaddaf ElectromechanicalTel: +971 2 5503331 Fax: +971 2 5503332Corodex IndustriesTel: +971 2 5503331 Fax: +971 2 5503332Bristol Vehicle Manufacturing Division Tel: +971 2 5575551 Fax: +971 2 5575550

Al Ain:

Concorde Trading CompanyTel: +971 3 37212515 Fax: +971 3 37211254

Sharjah:

Corodex AgenciesTel: +971 6 5430800 Fax: +971 6 5430801Dubai Industrial Gases (DIG)Tel: +971 6 5347700 Fax: +971 6 5347007

Dubai:

Corodex IndustriesTel: +971 4 3479895 Fax: +971 4 3479896Bristol GasesTel: +971 4 3472436 Fax: +971 4 3472441Corodex Trading CompanyTel: +971 4 3472900 Fax: +971 4 3472796Corodex MarineTel: +971 4 3472164 Fax: +971 4 3472184Corodex Agencies (Fire Protection & Automation)Tel: +971 4 3472530 Fax: +971 4 3472501Bristol Fire EngineeringTel: +971 4 3472426 Fax: +971 4 3472363Corodex Electromechanic Co. (LLC)Tel: +971 4 3472900 Fax: +971 4 3470059Corodex Agencies (Safety & Rescue)Tel: +971 4 2668966 Fax: +971 4 2624617

World WideQatar:

International Gulf Trading CompanyTel: +974 44694340 Fax: +974 44694467

Jordan:

Gulf Sail For Water Technology Tel: +962 6 5542968 Fax: +962 6 5542967

Oman:

Integrated Engineering Solutions (IES)Tel: +968 24700349 Fax: +968 24700168

Saudi Arabia:

Concorde Advance Technical Solutions:Tel: +966 12 698 4993 Fax: +966 12 698 4991

UK:

EFLO InternationalTel: + 44 (0) 1295 817623 Fax: + 44 (0) 872 1156890

Marine DivisionP.O.Box 12282 Dubai, UAE Tel: +971 4 3472164 Fax: 00971 4 3472184E-mail: [email protected], www.corodex-marine.com

......................................

Hood Information:

Material

Thickness

Splicing system

Splicing resistance

Vizor

Exhalation valve

Exhalation valve/opening pressure

Inner mask

Neck Seal

Hose working pressure

Hose burst pressure

Flame reterdant PVC coated fabric

min 0.5mm

Electro-frequency

0.3 bar

Flame reterdant transparent PVC, thickness 0.5mm

Spring loaded with silicone diaphragm

1.5 – 2 mbar

Natural rubber

Natural latex

10 bar

30 bar

EN 1146/2005

ISO 23269-1/2008

SOLAS 74 including amendments 2000 (IMO Res.MSC.99 (73), Reg. II-2/13,3.4 and 13,4.3

International Code of Fire Safety System (IMO Res.MSC.98 (73), Chapter 3, Para.2.2

MSC/Circ.849- Guidelines for the performance, location, use and care of Emergency Escape Breathing Devices (EEBD)

F-Standards Met

58 cm

Width

Total Height

22 X 15 cm

G-Dimensions/Weight

5.7 kg

3.7 kg

6.7 kg

4.7 kg

Net weight with steel and aluminium cylinder

Net weight with carbon composite cylinder

Fully charged weight with steel and aluminium

Fully charged weight with carbon composite cylinder

Page 2: Emergency Escape Breathing Apparatus - Corodex … · Emergency Escape Breathing Apparatus Concorde-Corodex Group ... E-mail: info@corodex.com, Distributors Afghanistan Algeria Azerbaijan

15 Minutes (EEBD)

Emergency Escape Breathing Device

In emergency situations, conditions can deteriorate rapidly. The air is suddenly �lled with smoke or toxic fumes and rapid escape is the only available option. The NEAR guard was designed to be suitable even for people with spectacles or facial hair. When opened, the Near guard is automatically activated and begins feeding a continuous supply of breathing air. The NEAR guard gives the wearer the precious additional time needed to exit the area safety.

The NEAR guard utilizes a simple, fail-safe reducer system with excellent �ow characteristics, providing a consistent rate of air �ow until the cylinder is completely empty. An alarm whistle sounds before the air supply is exhausted. NEAR guard equipped with 3lt aluminium cylinder can hold 15 minute supply of air. The �ame reterdant hood incorporates a large visor for maximum peripheral vision.

The NEAR guard hood's elastic neck seal, resistance to the effects of high temperatures, ozone and diesel fumes, which are often found in places such as engine rooms. This translates to year of reliable, worry-free service even under adverse conditions.

Experience with emergency situation

Up to 15 minutes of lifesaving air

Worry-Free service

Low Maintenance

The NE&AR guard Emergency Escape Breathing Device allows safe, effective escape from hazardous environments. Simple to put on and featuring practically automatic operation, this hood-based, positive pressure breathing device can be used with minimal training.

The NEAR guard requires very little service and maintenance. A transparent window lets you check the cylinder pressure gauge easily without unpacking the unit.

Features and Bene�ts

• Meet SOLAS requirements and EN 1146 - ISO 23269

• Light and compact

• Simple to use, easy training

• Fast automatic starting

• 15 minutes air supply

• High visibility outer bag and hood for added safety

• Alarm whistle sounds before the air supply exhausted

• Harness, inner mask, and neck seal for increased tightness

• Exhalation valve minimizes visor misting and CO2 accumulation

• Cylinder pressure indicator for simple visual check

Technical DataSize (H x L x D) 550 x 250x 150 mm

200 bar

35 - 40 lt/min

6.6 kg

3 liter steel, aluminium and carbon composite

Cylinder charging pressure

Air�ow to the hood

Weight (approximate)

Cylinder

A-General

Technical Description

The escape breathing apparatus NEAR guard is a compressed air breathing apparatus to be used for emergency escape from irrespirable atmospheres. It has been designed in accordance with EN 1146 to demonstrate compliance with safety requirements of EC directive 89/686/EEC. It is a lightweight apparatus that is simple to use and gives a consistent �ow of breathable air. The NEAR guard has duration of minimum 15 minutes. This is the duration required by IMO. In the apparatus a fast positive method of operation permits air to pass from the compressed cylinder into a �exible hood which can be slipped over the head in a fast maneuver without any complication.

Aluminium (AA 6061 t6), Steel, Carbon composite

3L

200 bar

300 bar

600L

Body Od.:117mm –Height : 460mm- Mass: Aluminium and steel 4 kg, Carbon composite 2,1 kg

m 25X2 Carbon composite cylinder m18X1.5

B-Cylinder

The aluminium compressed air cylinder is certi�ed according to Transportable Pressure Equipment Directive 99/36/EC and designed in accordance with EN 1975.

NEAR guard Cylinder:Material

Water Capacity

Charging Pressure

Test Pressure

Free Air Capacity

Dimensions

Thread

Activating strap & pin

Contents gauge

Spring loaded exhalation valve

Cylinder and regulator valve

Elastomeric neck seal

Hood

Wide Vizor

Bag

D-Regulator / Cylinder Valve

The Regulator is mounted on the cylinder. The regulator has a quick start function. By pulling the Start Pin (bag cover) valve is opened in one movement. When the start pin is drawn the air�ow starts. From the outlet of the regulator, a �exible hose leads the �ow of air into the hood. The air�ow minimize CO2 built up however the hood must be removed as soon as the clearance of the hazard area. A constant reading pressure gauges is �tted to the regulator, providing a continuous indication of the cylinder pressure. For protect to manometer the regulator pressure gauge connection air �ow to be reduced a maximum of 15L/min. Warning device (whistle) �tted to the regulator, when the tube pressure fall about 10 bar, whistle sounds continuously. Filling adaptor through EN 144-2 G 5/8”.

Regulator / Cylinder Valve:

Material

System

Working Pressure

Test Pressure

Air Supply

Starting

Charging

Manometer

Whistle start pressure

Whistle stop pressure (charging)

Nickel plated brass

Piston-spring type

200 bar

300 bar

35 - 40 L/min

Automatic starting when the Start Pin pulled out

G-5/8”

40mm diameter-0-315bar- accordance with 837-1

5-12 bar

max 30 bar

E-Hood

The hood assembly consist of a bright yellow hood, the inner mask, the air supply hose and the exhalation valve. When the NEAR guard is operated, the hood is �lled with air and provides a reservoir of air. When the user inhalation, air goes from the hood to the inner mask and will be inhaled. Air supply connection is in the inner mask. When exhalation, supplied air is prevent to mixing/leaking exhalation air to reservoir air. Exhalation goes through an exhalation valve from the inner mask to the ambient atmosphere. This prevent the building up of high levels of carbon dioxide. The non-misting vizor is designed for maximum �eld of vision during escape. The inner harness provides automatic and easily adjustment for the inner mask. The harness design guides the mask onto the user’s face and assumes the correct position. The neck seal accommodates a wide range of �ts and needs no adjustments after donning.

The cylinder and the hood are carried in the bag

The yellow colored bag is made of �ame reterdant strong PVC material and has a quick opening through Velcro strips

Anti-static property is provided with conductive carbon paint on the bag outer surface. The pressure gauge is readable through the transparent window. This allows the users to check the pressure gauge without opening the bag

The duration time for the apparatus, approvals and pictorial user instructions are brie�y printed on the bag

When pulling bag cover, the start pin activates, the air�ow starts and the bag opens so the hood can be taken and be pulled over the head

The neck belt made of synthetic �ber allows the users to wear and carry the apparatus easily

C-Bag