Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Elsyca, Vaartdijk 3/603, B-3018 WIJGMAAL, Belgium Tel:+32 16 474960 [email protected]
ELSYCA Meshing Taking grid generation to the next level of automation and user
Elsyca MeshingMaster generate
automated way starting from
automated tools for thickening sheets, closing geometric holes, separating volumes, etc.
Taking the stress out of grid generation
In numerous engineering applications, there is a need to generate high
meshes, even when only poor-quality CAD or tessellated data
Over the last ten years, Elsyca has developed in
demanding needs of electrochemical simulations. In co
successfully benchmarked this technology for a variety of applications (such as acoustics, CFD,
thermal, e-coating, rapid prototyping) and is now bringing this t
Elsyca technology creates, in a fully automat
surface mesh based on any CAD/
intervention even if the original model include
penetrations, and gaps or cracks. The resulting watertight surface mesh can be rem
either the Elsyca Surface Remesher or any third party mesher, to generate the required surface
discretization and form the basis of a volume mesh.
out model sections and mesh these, to thicken sheets and close gaps, to identify and close geometric
holes, thereby allowing to separate volumes (e.g. inside passenger compartmen
outside air surrounding the vehicle for CFD applications).
3018 WIJGMAAL, Belgium Tel:+32 16 474960 [email protected] www.elsyca.com
MeshingMasterTaking grid generation to the next level of automation and user
generates high-quality watertight surface meshes
from low-quality input data (STL). In addition, it offers a set of
automated tools for thickening sheets, closing geometric holes, separating volumes, etc.
Taking the stress out of grid generation
applications, there is a need to generate high-quality surface or volume
quality CAD or tessellated data (STL) is available.
Over the last ten years, Elsyca has developed in-house the grid generation technology to suit the
manding needs of electrochemical simulations. In co-operation with leading clients, Elsyca has
successfully benchmarked this technology for a variety of applications (such as acoustics, CFD,
coating, rapid prototyping) and is now bringing this to the market!
in a fully automated way, a guaranteed watertight (globally continuous)
CAD/STL file or FE mesh. The surface mesh is created without manual
intervention even if the original model includes touching bodies/overlaps,
and gaps or cracks. The resulting watertight surface mesh can be rem
mesher or any third party mesher, to generate the required surface
the basis of a volume mesh. A variety of automated tools is available to cut
out model sections and mesh these, to thicken sheets and close gaps, to identify and close geometric
holes, thereby allowing to separate volumes (e.g. inside passenger compartment for acoustics versus
outside air surrounding the vehicle for CFD applications).
www.elsyca.com
Master Taking grid generation to the next level of automation and user-friendliness!
meshes in a fully
In addition, it offers a set of
automated tools for thickening sheets, closing geometric holes, separating volumes, etc.
quality surface or volume
house the grid generation technology to suit the
operation with leading clients, Elsyca has
successfully benchmarked this technology for a variety of applications (such as acoustics, CFD,
guaranteed watertight (globally continuous)
The surface mesh is created without manual
s touching bodies/overlaps, intersections,
and gaps or cracks. The resulting watertight surface mesh can be remeshed, using
mesher or any third party mesher, to generate the required surface
A variety of automated tools is available to cut
out model sections and mesh these, to thicken sheets and close gaps, to identify and close geometric
t for acoustics versus
Elsyca, Vaartdijk 3/603, B-3018 WIJGMAAL, Belgium Tel:+32 16 474960 [email protected]
Elsyca MeshingMaster
Watertight mesh generation
Sheet thickening & gap healing
Features
• input model can be of
from low resolution STL data to extremely
fine FE mesh or detailed CAD data
• able to separate volume
cavity mesh vs. outer shell
• automatic removal of all features smaller
than user-specified CAD resolution
• small gaps can be automatically stitched
• adaptive grid feature optimizes
minimize mesh size
• thickening of surface to solids
Options
• Elsyca Surface Remesher:
mesh is re-meshed to obtain any desired
element size or distribution based on
triangles
• Elsyca Volume Mesher
surface mesh serves as input
a volume mesh based on tetrahedrons
3018 WIJGMAAL, Belgium Tel:+32 16 474960 [email protected] www.elsyca.com
Master
Separation of volumes / Closing holes
Adaptive grid size
Benefits
be of any complexity,
from low resolution STL data to extremely
fine FE mesh or detailed CAD data
parate volumes, e.g. an interior
outer shell
utomatic removal of all features smaller
specified CAD resolution
mall gaps can be automatically stitched
optimizes spacing to
thickening of surface to solids
• robust: any (poor) quality input
model/mesh is acceptable as input
• automated: no clean
or STL data is required
• user-friendly: setting up the meshing
process is done in a matter of minutes
• Fast: a very fine full body
of a vehicle is generated in 1h on a
standard desktop PC
• valid grid guaranteed:
triangles, no gaps, no intersections
Computer requirement
Elsyca Surface Remesher: the surface
meshed to obtain any desired
element size or distribution based on
Elsyca Volume Mesher: the watertight
serves as input to generate
based on tetrahedrons
• Windows 7 or 8 environment
• 16GB RAM (32GB recommended)
• High-end graphical card
Quadro 2000 1GB)
• Fast hard disk of 500GB or more
www.elsyca.com
of volumes / Closing holes
ny (poor) quality input
is acceptable as input
clean-up of CAD model
or STL data is required
setting up the meshing
in a matter of minutes
full body-in-white grid
of a vehicle is generated in 1h on a
standard desktop PC
guaranteed: no missing
triangles, no gaps, no intersections
Windows 7 or 8 environment
GB recommended)
end graphical card (E.g. NVIDIA
of 500GB or more