Upload
others
View
34
Download
0
Embed Size (px)
Citation preview
Submit comments about this document by clicking the Feedback [+] link at: http://docs.sun.com
StorageTek Enterprise Library Software
Syntax Quick Reference
Version 7.1
October 2010Revision AA
ii October 2010 Revision AA
ELS 7.0 Syntax QuickReference
Copyright © 2009, 2010, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.
If this is software or related software documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:
U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle USA, Inc., 500 Oracle Parkway, Redwood City, CA 94065.
This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications which may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure the safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.
Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.
AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. UNIX is a registered trademark licensed through X/Open Company, Ltd.
This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.
Revision AA iii
Contents
Preface xi
Related Documentation xii
Documentation, Support, and Training xiii
Oracle Welcomes Your Comments xiii
Additional Information xiv
1. SMC Commands and Control Statements 1
ALLOCDef 2
ALLOCJob 3
CMDDef 4
COMMtest 5
Display DRive 6
Display Volume 7
DRIVemap 8
Help 9
HTTP 10
IDAX 11
LIst 12
LOG 13
MONitor 14
MOUNTDef 15
MSGDef 16
MSGJob 17
POLicy 18
READ 19
iv ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
RESYNChronize 19
Route 20
SERVer 21
SIMulate 22
SMSDef 23
STORMNGR 24
TAPEPlex 25
TCPip 26
TRace 27
TREQDef 28
TAPEREQ Control Statement 29
UEXit 30
UNITAttr 31
USERMsg 32
2. HSC and VTCS Commands and Control Statements 33
ACTIvities 34
ACTMVCGN 34
ARCHive 35
AUDit 36
BACKup 37
CANcel 37
CAPPref 38
CDs 38
CDSDAta 39
CDSDEF 39
CLean 40
COMMPath 41
CONFIg 42
CONFIg GLOBAL Statement 43
CONFIg RECLAIM Statement 43
CONFIg VTSS Statement 44
CONFIg RTD Statement 44
CONFIg VTD Statement 44
Revision AA Contents v
CONFIg CLUSTER Statement 44
CONFIg CLINK Statement 44
CONFIg HOST Statement 45
CONFIg TAPEPLEX Statement 45
CONSolid 46
DEComp 46
DELETSCR 47
DIRBLD 47
DISMount 48
Display Acs 48
Display ACTive 49
Display ALl 49
Display Cap 50
Display CDS 50
Display CLInk 51
Display CLUster 51
Display CMD 52
Display COMMPath 52
Display CONFIG 53
Display DRives 53
Display DRIVE_INFO 54
Display EXceptns 55
Display LMUPDEF 55
Display LOCKs 56
Display Lsm 56
Display Message 57
Display MGMTDEF 57
Display MIGrate 58
Display MNTD 58
Display MONitor 59
Display MVC 59
Display MVCPool 60
Display OPTion 60
vi ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
Display PATH 61
Display Queue 61
Display REPlicat 62
Display Requests 62
Display RTD 63
Display SCRatch 63
Display SEN 64
Display SERVER 64
Display SRVlev 65
Display Status 65
Display STORCLas 66
Display STORMNGR 66
Display TASKs 67
Display THReshld 67
Display Volser 68
Display VOLUME_INFO 68
Display VSCRatch 69
Display VTD 69
Display VTSS 70
Display VTV 70
DRAin 71
DRTEST CREATE 72
DRTEST PRIMEprd 73
DRTEST RESET 74
DRTEST START 74
DRTEST STOP 75
EEXPORT 76
EJect 77
ENter 78
EXECParm 78
EXPORT 79
FMTLOG 80
IMPORT 81
Revision AA Contents vii
INITialize 82
INVENTRY 83
LIBGen 83
LMUPDEF 84
LMUPATH Control Statement 84
LOGUTIL 85
LOGUTIL FOR_LOSTMVC Statement 85
LOGUTIL GENAUDIT Statement 86
LOGUTIL LOCATE_VTV 86
LOGUTIL UNDELETE Statement 86
MERGEcds 87
SLSMERGE Control Statement 87
MERGMFST 88
MGMTDEF 88
MGMTclas Control Statement 89
MIGRSEL Control Statement 90
MIGRVTV Control Statement 90
MVCATTR Control Statement 90
STORclas Control Statement 91
STORLST Control Statement 91
STORSEL Control Statement 91
VTSSLST Control Statement 92
VTSSSEL Control Statement 92
MIGrate 93
Format 1 93
Format 2 93
MNTD 94
MODify 95
Mount 96
MOVe 97
MVCDRain 98
MVCMAINT 99
MVCPLRPT 100
viii ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
MVCRPt 101
OFFload LOGFILE 101
OPTION TITLE Control Statement 102
OPTion 103
RECall 104
RECLaim 105
RECONcil 106
RECOVer 106
RELease 107
REPLaceall 107
RESTore 108
RTV Utility 108
SCRAtch 109
SCREdist 109
SENter 110
SET CLNPRFX 110
SET COMPRFX 111
SET DRVHOST 111
SET EJCTPAS 112
SET FREEZE 112
SET HOSTID 113
SET HSCLEVel 113
SET LOGFILE 114
SET MAJNAME 114
SET MIGOPT 115
SET NEWHOST 115
SET RMM 116
SET SCRLABL 116
SET SLIDRIVS 117
SET SLISTATN 117
SET SMF 118
SET TAPEPlex 118
SET TCHNIQE 119
Revision AA Contents ix
SET VAULT 120
SET VAULTVOL 120
SET VOLPARM 121
POOLPARM Control Statement 122
VOLPARM Control Statement 122
SRVlev 123
STOPMN 123
SWitch 124
TRace 124
TRACELKP 125
UEXIT 125
UNSCratch 126
UNSElect 126
Vary 127
VIew 128
VOLPCONV 129
VOLRpt 130
VTVMAINT 131
VTVRPt BASIC 132
VTVRPt COPIES 132
Warn 133
Revision AA xi
Preface
Oracle’s StorageTek Enterprise Library Software (ELS) is a solution consisting of the following base software:
■ Oracle’s StorageTek Storage Management Component (SMC) (includes the product formerly known as StorageTek HTTP Server)
■ Oracle’s StorageTek Host Software Component (HSC)
■ Oracle’s StorageTek Virtual Tape Control Software (VTCS)
■ Oracle’s StorageTek Concurrent Disaster Recovery Test (CDRT)
Additionally, the following software is provided with the ELS package:
■ Oracle’s StorageTek Library Content Manager (LCM). LCM includes an enhanced version of the product formerly known as Offsite Vault Feature.
■ Oracle’s StorageTek Client System Component for MVS Environments (MVS/CSC)
■ Oracle’s StorageTek LibraryStation
This publication provides syntax for commands, control statements, and utilities provided by ELS. It is intended for storage administrators, system programmers and operators responsible for configuring and maintaining ELS.
To perform the tasks described in this publication, you should already understand the following:
■ z/OS operating system■ JES2 or JES3■ Enterprise Library Software (ELS)
xii ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
Related DocumentationThe following list contains the names of publications that provide additional information about ELS.
The documentation is available online at:
http://docs.sun.com
StorageTek Enterprise Library Software (ELS)■ Introducing ELS■ Installing ELS■ ELS Command, Control Statement, and Utility Reference■ ELS Messages and Codes■ ELS Programming Reference■ ELS Legacy Interfaces Reference■ Configuring HSC and VTCS■ Managing HSC and VTCS■ Configuring and Managing SMC■ ELS Disaster Recovery and Offsite Data Management Guide
StorageTek Library Content Manager (LCM)■ LCM User’s Guide■ LCM Messages and Codes■ LCM Quick Reference
StorageTek Client System Component for MVS Environments (MVS/CSC)■ MVS/CSC Configuration Guide■ MVS/CSC Messages and Codes Guide■ MVS/CSC Operator’s Guide ■ MVS/CSC Syntax Quick Reference■ MVS/CSC System Programmer’s Guide
StorageTek LibraryStation■ LibraryStation Configuration and Administration Guide■ LibraryStation Syntax Quick Reference
Revision AA Preface xiii
Documentation, Support, and Training
Oracle Welcomes Your CommentsOracle is interested in improving its documentation and welcomes your comments and suggestions. Submit your comments by clicking the Feedback link at:
http://docs.sun.com
Function URL
Oracle Home http://oracle.com
Documentation http://docs.sun.com
Support http://www.sun.com/support
Training http://www.oracle.com/global/us/education/sun_select_country.html
xiv ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
Additional Information
Customer-initiated Maintenance Customer-initiated maintenance begins with a telephone call from you to Oracle StorageTek Support. You receive immediate attention from qualified Oracle personnel, who record problem information and respond with the appropriate level of support.
To contact Oracle StorageTek Support about a problem:
1. Use the telephone and call:
☎ 800.872.4786 (1.800.USA.4SUN) (inside the United States)
☎ 800.722.4786 (Canada)
For international locations:
http://www.sun.com/contact/support.jsp
2. Describe the problem to the call taker. The call taker will ask several questions and will either route your call to or dispatch a support representative.
If you have the following information when you place a service call, the process will be much easier:
Account name
Site location number
Contact name
Telephone number
Equipment model number
Device address
Device serial number (if known)
Urgency of problem
Fault Symptom Code (FSC)
Problem description
Revision AA Preface xv
Conventions for Reader Usability
Typographic
Some JCL examples in this guide include italic type. Italic type is used to indicate a variable. You must substitute an actual value for these variables.
The use of mixed upper and lower case characters for commands, control statements, and parameters indicates that lower case letters may be omitted to form abbreviations. For example, you may simply enter POL when executing the POLicy command.
Syntax Flow Diagrams
Syntax flow diagramming conventions include the following:
Flow Lines
Syntax diagrams consist of a horizontal base line, horizontal and vertical branch lines, and the text for a command, control statement, macro, or utility. Diagrams are read left to right, and top to bottom. Arrows indicate flow and direction.
Single Required Choice
Branch lines (without repeat arrows) indicate that a single choice must be made. If one of the items to choose from is positioned on the baseline of the diagram, one item must be selected.
COMMAND/MACRO/UTILITY Item 1Item 2Item 3
Item 1Item 2Item 3
xvi ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
Single Optional Choice
If the first item is positioned on the line below the baseline, one item may be optionally selected.
Defaults
Default values and parameters appear above the baseline.
Some keyword parameters provide a choice of values in a stack. When the stack contains a default value, the keyword and the value choices are placed below the base line to indicate that they are optional, and the default value appears above the keyword line.
Repeat Symbol
A repeat symbol indicates that more than one choice can be made or that a single choice can be made more than once. The following example indicates that a comma is required as the repeat delimiter.
Item 1Item 2Item 3
Default
KeywordValue3
Default ValueValue2
,variable
Revision AA Preface xvii
Keywords
All command keywords are shown in all upper case or in mixed case. When commands are not case sensitive, mixed case implies that the lowercase letters may be omitted to form an abbreviation.
Variables
Italic type is used to indicate a variable.
Alternatives
A bar ( | ) is used to separate alternative parameter values.
Optional
Brackets [ ] are used to indicate that a command parameter is optional.
Delimiters
If a comma (,), a semicolon (;), or other delimiter is shown with an element of the syntax diagram, it must be entered as part of the statement.
Ranges
An inclusive range is indicated by a pair of elements of the same length and data type, joined by a dash. The first element must be strictly less than the second element.
A hexadecimal range consists of a pair of hexadecimal numbers (for example, 0A2-0AD, or 000-0FC).
A decimal range consists of a pair of decimal numbers (i.e., 1-9, or 010-094). Leading zeros are not required. The decimal portion is referred to as an incremental range. The character positions of the incremental portion of both range elements must match, and the non incremental characters of the first element must be identical to those of the second element.
A numeric VOLSER range (vol-range) consists of a pair of VOLSER elements containing a decimal numeric portion of 1 to 6 digits (for example, ABC012-ABC025, or X123CB-X277CB). The decimal portion is referred to as an incremental range. The following additional restrictions apply:
■ The character positions of the incremental portion of both range elements must match.
■ The non incremental characters of the first element must be identical to those of the second element.
■ You cannot increment two portions of a range element. If 111AAA is the first element, you cannot specify 112AAB for the second element.
xviii ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
■ If a VOLSER range contains more than one decimal portion, any portion is valid as the incremental range. For example:
An alphabetic VOLSER range (vol-range) consists of a pair of VOLSER elements containing an incremental portion of 1 to 6 characters (for example, 000AAA-000ZZZ, or 9AAA55-9ZZZ55). This portion is referred to as an incremental range. The following additional restrictions apply:
■ The character positions of the incremental portion of both range elements must match.
■ The non incremental characters of the first element must be identical to those of the second element.
■ You cannot increment two portions of a range element. If 111AAA is the first element, you cannot specify 112AAB for the second element.
■ The alphabetic portion of the VOLSER range is defined as being from character A to Z. To increment multi-character sequences, each character increments to Z. For instance, ACZ is part of the AAA-AMM range. Examples are:
A00B00 the largest range that can be specified is A00B00 through A99B99.
A0B0CC the largest range that can be specified is A0B0CC through A9B9CC.
000XXX the largest range that can be specified is 000XXX through 999XXX.
A00A0-A99A0 increments VOLSERs A00A0 through A09A0, then A10A0 through A99A0.
9AA9A-9ZZ9A increments VOLSERs 9AA9A through 9AZ9A, then 9BA9A through 9ZZ9A.
111AAA-111ZZZ increments VOLSERs 111AAA through 111AAZ, then 111ABA through 111ZZZ
999AM8-999CM8 increments VOLSERs 999AM8 through 999AZ8, then 999BA8 through 999CM8
A3BZZ9-A3CDE9 increments VOLSERs A3BZZ9 through A3CAA9, then A3CAB9 through A3CDE9
AAAAAA-AAACCC increments VOLSERs AAAAAA through AAAAAZ, then AAAABA through AAACCC
CCCNNN-DDDNNN increments VOLSERs CCCNNN through CCCNNZ, then CCCNOA through DDDNNN *
* Caution: This is a very large range.
Revision AA Preface xix
The number of volumes in an alphabetic VOLSER range depends on the number of elements in the incrementing portion of the VOLSER range. For an A to Z range in each character position, the number of volumes can be calculated by 26 to the power of the number of positions that are being incremented.
Lists
A list consists of one or more elements. If more than one element is specified, the elements must be separated by a comma or a blank space, and the entire list must be enclosed in parentheses.
Blanks
Keyword parameters and values may be separated by any number of blanks.
Control Statements
The standard syntax conventions for control statements are as follows:
■ The only valid control statement information area is from column 1 to column 72. Columns 73-80 are ignored.
■ Parameters may be separated by one or more blanks or a comma.
■ A value is associated with a parameter by an equal (=) sign or by enclosing the value in parentheses, and concatenating it immediately after the parameter.
■ Case (upper or lower) is ignored in actual control statements.
■ Continuations are supported by including a plus (+) sign at the end of the line to be continued. A control statement is terminated if the statement is not continued.
■ /* and */ can be used to enclose comments in the job stream. Comments can be continued over multiple lines, but cannot be nested.
PARMLIB members must include a /*...*/ comment as the first control statement. Otherwise, the old format is assumed. Comments in the old format must begin with an asterisk (*) in column 1.
For definition data sets (e.g., VOLATTRs, UNITATTRs and TAPEREQs), comments must be in the new format (/*...*/).
■ Asterisk (*) comments are not allowed.
■ A /*...*/ comment in the first line is not required.
■ The maximum length for a control statement is 1024 characters.
A-Z 261 26
AA-ZZ 262 676
AAA-ZZZ 263 17,576
AAAA-ZZZZ 264 456,976
AAAAA-ZZZZZ 265 11,881,376
AAAAAA-ZZZZZZ 266 308,915,776
Revision AA 1
CHAPTER
1
SMC Commands and Control Statements
This chapter contains syntax for SMC commands and control statements. Interface and subsystem requirement information is included with each command.
Control statements that are loaded by an operator command are described along with that command.
Note – For detailed information about the commands and control statements included in this publication, and the interfaces used to issue them, refer to the ELS Command, Control Statement, and Utility Reference.
ALLOCDef
2 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
ALLOCDefInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
ALLOCDef
SEPLvl(seplevel
MAXMIN
OFF
)MINLvl(2
)minlevel
MIAcompat( )OFFON
SMS(OFFON )
OFFFAILnoinfo( ALL )
SPECIFIC
CA1rts( )OFFON DEFer(
ONJES3OFF
) FETCHmsg(OFFONNONLIB
)
EXTVOLesot(
OFF
)esoteric [,
ZEROscr(
ALL ]USEREXIT
LIst
Optional Parameters
Optional Parameters:
LIst
LIst
OFF,OUtside
INside
ON,OUtside
INside
)
CAVTAPe(OFFON )
ALLOCJob
Revision AA Chapter 1 SMC Commands and Control Statements 3
ALLOCJobInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
SEPLvl(seplevel
MAXMIN
JOBname(jobname)
BYPass)MINLvl(
2)minlevel
STEPname(stepname)PROCstep(procstep)
Note: BYPass cannot be specified with the MINLvl or SEPLvl parameter. It is only valid when JOBname is also specified.
ALLOCJobLIst
Optional Parameters
Optional Parameters:
LIst
OFF
CMDDef
4 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
CMDDefInterfaces:
Console, utility, or SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required
CMDDefLIst
PREFix(command-prefix)
COMMtest
Revision AA Chapter 1 SMC Commands and Control Statements 5
COMMtestInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
Note – Only HSC TapePlexes or VLEs are eligible for the COMMtest command.
LOCalpath
COMMtestTAPEPlex(name)
SERVer(name)
ALLpaths
PORTrange(nnnnnnnn-nnnn
)
ANYSTATus
Note: PORTrange cannot be specified with the LOCalpath or ALLpaths parameter.
STORMNGR(name)SERVer(name)ALLpaths
ANYSTATus
Display DRive
6 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
Display DRiveInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
( devnumdevnum range
)
,devnum list
TAPEPlex(name)ALL
Virtual
Real and Virtual(No Nonlib)
VirtualNonlib
DRiveACTive
Real
Real
ALL
DisplayQuery
Display Volume
Revision AA Chapter 1 SMC Commands and Control Statements 7
Display VolumeInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
volservolser-range
)ALLtapeplex
Volume(DisplayQuery
volser-list
DRIVemap
8 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
DRIVemapInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
LIst
CLient( devnumdevnum-range
devnum-list
)SErver( devnum
devnum-range
devnum-list
,,
)
Optional ParametersDRIVemap
Optional Parameters:
LIstOFF
Help
Revision AA Chapter 1 SMC Commands and Control Statements 9
HelpInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
Helpcommand-namennnnnnnn-nnnnSMCnnnnSMCnnnn-SMCnnnn
HTTP
10 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
HTTPInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required
HTTPLIst
DETailSTArt
PORT(8080nnnn )
Tuning Parameters LIst
STOp
Tuning ParametersLIst
Tuning Parameters:
Note: May be included with STArt or after HTTP startup
100
WQUELEN(200nnnnSQUELEN(
500nnnn )
HSIOtasks(4n ) MAXClients( nnn )
FORCE
IDAX
Revision AA Chapter 1 SMC Commands and Control Statements 11
IDAXInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
POLicy( )ONOFF
SEQuence( )FIRSTLAST
MOD( )ONOFF
IDAXOFF
LIst
Optional Parameters
LIst
Optional Parameters:
VTVMAXvol( )ONOFF
LIst
12 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
LIstInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
LIst Address(address) Length(CB(control-block-name)
100length )
TASKsFUNIT( uuuu
uuuu uuuu)
LOG
Revision AA Chapter 1 SMC Commands and Control Statements 13
LOGInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required
LOGList
OFFLIst
Optional ParametersList
Optional Parameters:
Type( record-type ),
LRECL(OFFlrecl ) EOFREstart(
OFFON )
STart
STOpAPPend
MONitor
14 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
MONitorInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
■ Active SMC required
■ Cannot be input to the SMCUSIM utility
MONitorLIst
OFFMonitor Parameters
LIst
Monitor Parameters:
INTerval( )60nnnnOFF
ACTivecheck( )180nnnnOFF
LOWscratch(0nnnnOFF
)
PREFprimary(ON
OFF)
MOUNTDef
Revision AA Chapter 1 SMC Commands and Control Statements 15
MOUNTDefInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
)OFFON
)ONOFFAUTOPendmount(
ROLLmsg( )ONOFFVOLWatch(
)OFFONDISMSCRReal(
)OFFONDISMSCRVirt(
LIst
MOUNTDefOFF
LIst
Optional Parameters
LIst
Optional Parameters:
OFFVTVCompletemsg( ON )
SWAPAutoreply(ONOFF ) SWAPLimit(
3nnOFF
) SWAPReuse(OFFON )
MSGDef
16 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
MSGDefInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
CASE(UPPERMIXED ) LVl( level
8) ECHOmnterr(
OFF)
ON
SMCWtorpfx(ON
)OFF
VERBOSE( )OFF
ON
MSGDefOFF
LIst
Optional Parameters
LIst
Optional Parameters:
LIst
MSGJob
Revision AA Chapter 1 SMC Commands and Control Statements 17
MSGJobInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
MSGJobLIst
OFF
level
8JOBname(jobname)
STEPname(stepname)PROCstep(procstep)
LVL( )
LIst
Optional Parameters
Optional Parameters:
POLicy
18 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
POLicyInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
POLicyLIst
NAme(name) DETailTERse
ERRor VOLType(SpecificScratchNonspec
)
VALidateNAme(name) VOLType(
SpecificScratchNonspec
) LIst
NAme(name)NOnePolicy Parameters
LIst VALidate
Policy Parameters:
VOLType(SCratchSPecificNonspec
) MEDia( media type )
RECtech(
MODel(
recording-technique
model-type
)
)
SUBPool(subpool-name)
ESOTeric(esoteric-list) PREFer( LocationEsotericCount
)
MGMTclas(mgmt-class-name) TAPEPlex(tapeplex-name)NOTAPEPlex
IDAXESOTeric(esoteric-name) IDAXEXPDT(yyyyddd)IDAXRETPD(nnnn)
IDAXVOLcnt(volume-count)
IDAXSUBsys(subsystem-name)IDAXPROGram(program-name)
EXTVOLesot(esoteric-list)SPLITvolref(
OFF
ON)
READ
Revision AA Chapter 1 SMC Commands and Control Statements 19
READInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
RESYNChronizeInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
SMCCMDsDSN(dsn)
VOLume(volser)
READ
UNIT(unitname)
HOST(hostname)
RESYNChronize
Route
20 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
RouteInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required
tapeplex-nameRoute command-stringstormngr-name
SERVer
Revision AA Chapter 1 SMC Commands and Control Statements 21
SERVerInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
SERVerLIst
LIst
NAme(name)
NAme(name)ENAble
DISable TAPEPlex(name)
Added Server Parameters:
HOst(hostname)IPaddress(ipaddress)
POrt(80)
POrt(nnnn)
Note: TAPEPlex(name) or STORMNGR(name) is required when the SERVer NAME is first defined.
LIstAdded Server Parms
HSCSUB(ssss)
STORMNGR(name)
SIMulate
22 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
SIMulateInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
JOBname(jobname) STEPname(stepname)
{PGMname|PROGram}(pgmname) DDName(ddname)
{DSN|DATASET}(dsname) VOLSer(volser)
ESOTeric(esoteric-name) RETPD(EXPDT(expiration-date)
0retention-period
SIMulate
LABEL(label-type)
)
SMSDef
Revision AA Chapter 1 SMC Commands and Control Statements 23
SMSDefInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
VTVmgmt(ON
OFF) IGDACSXT(
OFF
ON)MGMTPol( )
OFF
SMSDefLIst
Optional Parameters:
Optional Parameters LIst
ONIDAXALL
TEMPdsn(ON
OFF)
STORMNGR
24 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
STORMNGRInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
STORMNGRLIst
LIstNAme(name)
NAme(name)ENAble
DISable
SERVerlist
STATus
NAme(name)
NAme(name)
TAPEPlex
Revision AA Chapter 1 SMC Commands and Control Statements 25
TAPEPlexInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
TAPEPlexLIst
LIst
NAme(name)
NAme(name)DIsable Local Subsys Parms
SERVerlistNAme(name)
Local Subsys Parameters:
STATusNAme(name)
TapePlex Parms
LOCSUBsys(subsysname) LOCDISable
LOCENAble
ENable
TapePlex Parameters:
Server
Client)WTORdest( ALIAShost(
OFF
hostname)
TCPip
26 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
TCPipInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
TCPipList
OFFTCPIP Parameters
LIst
TCPIP Parameters:
TCPname(nonename ) ADSname(
nonename ) PORTrange(
OFFllll-hhhh )
TRace
Revision AA Chapter 1 SMC Commands and Control Statements 27
TRaceInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
TRaceLIst
OFFLIst
Jobname/Component ParametersLIst
Jobname/Component Parameters:
SUbsys
JOBname
ALLProc
AScommCGiCMdHTtpINitterm
(jobname)ALLProc
OptionalParms
,
,ALLOcMSghandlerPOlicyREmoteUTility
Optional Parameters:
STEPname(stepname)PROCstep(procstep) SNAPdump( BEFOre
AFTErBOTH
)
TREQDef
28 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
TREQDefInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
TREQDefLIst
DATASET(dsn)DSN(dsn)
HOSTID(hostid)
RELOAD
VOLume(volser)UNIT(unitname)
TREQDef
Revision AA Chapter 1 SMC Commands and Control Statements 29
TAPEREQ Control Statement
JOBname( jobname*
) STEPname( stepname*
)
TAPEREQ
PROGram( program-name*
PGMname(program-name)DATASET( dataset-name
*
DSN(dataset-name)
RETPD( GE ,retention-periodEQNEGTLTLE
EXPDT( GE ,expiration-dateEQNEGTLTLE
POLicy(policy-name)
VOLSer(*volser )
DDname( DD-name*
)
LABEL(*label-type )
JCLESOT(*esoteric-name ) ACTRECT( rectech-list )
*
) )
)
)
UEXit
30 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
UEXitInterfaces:
Console, utility, or SMCCMDS/SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
UEXit
FORMat(HSCCSC )NAME(name)
LIst
number
ENAbleDISable
ENAble
DISableLOAD
LIst
UNITAttr
Revision AA Chapter 1 SMC Commands and Control Statements 31
UNITAttrInterfaces:
Console or SMCCMDS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
UNITAttr
devnum-range
devnum-list
ADDRess( devnumdevnum-range
)
,
TAPEPlex(NONEtapeplex-name )
LIst
Device AttributesOFF
LIst
ESOTeric(esoteric-name)Device AttributesOFF
LIst
Device Attributes:
MODEL(model-type)
NOTAPEPlex
Note: TAPEPlex is required when MOdel(VIRTUAL) is specified.
USERMsg
32 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
USERMsgInterfaces:
Console or SMCPARMS data set UUI: Yes (No XML/CSV output)
Subsystem Requirements:
Active SMC required, or may be input to the SMCUSIM utility
USERMsgID(msgid)
LIst
Revision AA 33
CHAPTER
2
HSC and VTCS Commands and Control Statements
This chapter contains syntax for HSC commands and control statements. Interface and subsystem requirement information is included with each command.
Control statements that are loaded by an operator command are described along with that command.
Note – ■ For detailed information about the commands and control statements included in
this publication, and the interfaces used to issue them, refer to the ELS Command, Control Statement, and Utility Reference.
■ Certain HSC and VTCS commands are described in the ELS Legacy Interfaces Guide. These commands were introduced in a pre-ELS 7.0 software release and their functionality has been replaced.
ACTIvities
34 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
ACTIvitiesInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
ACTMVCGNInterfaces:
SLUADMIN utility only UUI: Yes
Subsystem Requirements:
Active HSC required only when specifying the MVCPOOL parameter
ACTIvities
BEGIN(TODAYbegin-date ,
00:00:00begin-time )
END(TODAYend-date ,
00:00:00end-time )
ACTMVCGN
ACS(,acs-id ) MVCPOOL(
,)
STORMNGR( stormngr,
)
mvcpool-name
ARCHive
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 35
ARCHiveInterfaces:
Utility only UUI: Yes
Subsystem Requirements:
Active HSC not required
ARCHiveMGMTclas(mgmt-class-name1...mgmt-class-namen)VTV(vtv-list | vtv-range)
MAXMVC(nn) CONMVC(nn) ELAPSE(nnnn) POLICYdd(ddname)MOVEVTV
AUDit
36 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
AUDitInterfaces:
Utility only UUI: Yes, when MVC or VTSS is specified
Subsystem Requirements:
■ Active HSC/VTCS (AUDit MVC, VTSS, or INVLDMIR)
■ Active HSC at FULL service level (all others)
Optional Parameters APPLy(YESNO )
Optional Parameters:
LSM(lsm-list)PANel(panel-list)
ROW(row-list)COLumn(column-list)
CAP(cap-id) EMPTYCel DIAGScan( ONLYALSO
) INTRANs
VTSS( vtss-name
vtss-list,
)
MVC( volservol-range
vol-list,
)
INVLDMIR
AUDit ALLACS(acs-id)
BACKup
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 37
BACKupInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
CANcelInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
BACKup
CANcel ID(process-id)Type( ALL
MIGrateRECAllRECLaim
)
CAPPref
38 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
CAPPrefInterfaces:
Console or PARMLIB UUI: No
Subsystem Requirements:
Active HSC at FULL service level
CDsInterfaces:
Console or PARMLIB UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
CAPPref prefvlue lsm-idcap-idcap-range
(,cap-list )
host-id AUTOMANual
CDs Enable DSn(dsn)NEWLoc NEWVol(volser),NEWUnit(unitname)
Disable DSn(dsn)PrimarySEcndrySTandby
EXpand
CDSDAta
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 39
CDSDAtaInterfaces:
Utility only UUI: Yes
Subsystem Requirements:
Active HSC not required
CDSDEFInterfaces:
PARMLIB only UUI: No
Subsystem Requirements:
None
CDSDAtaVOLPOOLMVCPOOLSCRPOOL
TYPE( )
CDSCAPLSMDRV
DSN1(dataset-name),VOL1(volser),UNIT1(unitname)
CDSDEF
,DSN2(dataset-name),VOL2(volser),UNIT2(unitname)
,DSN3(dataset-name),VOL3(volser),UNIT3(unitname) ,DISABLE
CLean
40 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
CLeanInterfaces:
Console or PARMLIB UUI: No
Subsystem Requirements:
Active HSC at FULL service level
CLeandev-rangedev-id
( dev-list,
)
host-id
COMMPath
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 41
COMMPathInterfaces:
Console or PARMLIB only UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
COMMPath HOSTid(host-id)
METHod( CDSLMULMU,acs-idVTAM
)LMUpath( acs-id
acs_range,acs-list
) VTAMpath(name)
LMUpath( acs-idacs_range,acs-list
)VTAMpath(name)
VTAMpath(name)DELete
LMUpath( acs-idacs_range,acs-list
)VTAMpath
(name)
VTAMpath(name)
CONFIg
42 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
CONFIgInterfaces:
Utility only UUI: Yes
Subsystem Requirements:
Active HSC not required, and must be down on all hosts when running CONFIG RESET.
CONFIgRESET CDSLEVEL( V6ABOVE
V61ABOVEV62ABOVE
) NOUPDATE
V71ABOVE
CONFIg
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 43
CONFIg GLOBAL Statement
CONFIg RECLAIM Statement
GLOBALMAXVTV=nnnnnn MVCFREE=nnnn
VTVattr=SCRATCH
ALLmount
RECALWER=YES
NO
LOCKSTR=structure-nameREPlicat=
ALWAYS
CHANGED
VTVPAGE=STANDard
LARGENLIBDRNR=
YES
NONLIBMIGR=
YES
NO
NLIBRECL=YES
NO
MVCMNTTO=nn
SYNCHREP=NO
YES
MAXRTDS= 1632 FASTMIGR=
NO
YES
LOGPOL=OPTional
REQuired
INITMVC=NO
YES
MAXVTVSZ=400
80020004000
RECLAIMTHRESHLD=nn MAXMVC=nn START=nn
CONMVC=nn INPLACE= YESNO INPTHRSH=nn
VLTHRES=nn
CONFIg
44 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
CONFIg VTSS Statement
CONFIg RTD Statement
CONFIg VTD Statement
CONFIg CLUSTER Statement
CONFIg CLINK Statement
VTSS NAME=xxxxxxxxDEFLTACS=acs-id LOW=nn HIGH=nn
MAXMIG=n MINMIG=n RETAIN=nn
RTD NAME=xxxxxxxxSTORMNGR=stormngr
IPIF=nn:nDEVNO=nnnnCHANIF=ci|ci:p
VTD LOW=xxxx HIGH=xxxxCUADDR=xx NOVERIFY
CLUSTER NAME=nnnnnnnn VTSSs(vtss-list)
CLINK CHANIF=ci|ci:pVTSS=name REMPlex=name
PARTner=name
IPIF=nn:n
CONFIg
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 45
CONFIg HOST Statement
CONFIg TAPEPLEX Statement
HOST NAME=xxxxNOMIGRAT NORECLAM
TAPEPLEXRECVPLEX(tapeplex-list)
THISPLEX=name
STORMNGR(stormngr-list)
CONSolid
46 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
CONSolidInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
DECompInterfaces:
Utility only UUI: Yes
Subsystem Requirements:
Active HSC not required
CONSolidVTV(
vol-rangevolser
vol-list,
)
MGMTclas( mgmt-class-name ),mgmt-class-list
RECALWER(YES
NO)
DECompFLATdd(ddname) LISTDELR
DELETSCR
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 47
DELETSCRInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
DIRBLDInterfaces:
Utility only UUI: No
Subsystem Requirements:
Active HSC not required
DELETSCRVTVid(
vol-list
vol-range,
volser )
MGMTclas(,mgmt-clas-name )
SCRPool(,scrpool )
NOTREF(days)MAXVTV(nnn) DETail
VTSS(vtss-name)
DIRBLD
DISMount
48 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
DISMountInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at FULL service level
Display AcsInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at FULL service level
DISMountvolser, devaddr
host-id FORCE
Acsacs-idacs-range
(,acs-list )
DisplayQuery
Display ACTive
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 49
Display ACTiveInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
Display ALlInterfaces:
Console or PARMLIB only UUI: No
Subsystem Requirements:
Active HSC at FULL service level
ACTiveDETail
VTSS(vtss-name)
DisplayQuery
ALlDisplayQuery
Display Cap
50 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
Display CapInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at FULL service level
Display CDSInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at BASE or FULL service level
Cap(all CAPs)
acs-idlsm-idcap-id
DisplayQuery
CDSDisplayQuery
Display CLInk
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 51
Display CLInkInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
Display CLUsterInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
CLInkDisplayQuery
CLUsterDisplayQuery
Display CMD
52 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
Display CMDInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at BASE or FULL service level
Display COMMPathInterfaces:
Console or PARMLIB only UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
CMDCOmmand command-name
DisplayQuery
COMMPath
HOSTid(*ALLhost-id
host-list
)
DisplayQuery
Display CONFIG
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 53
Display CONFIGInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at FULL service level
Display DRivesInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at FULL service level
CONFIGDisplayQuery
DRivesLibraryACS(acs-id)LSM(lsm-id)
ACtiveIdleALl
BYDrive
BYLoc DETail
MEDia(media-type) RECtech(recording-technique)MODel(model-type)
Unit( unit-addressunit-address range
)
DisplayQuery
IDEntity
Display DRIVE_INFO
54 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
Display DRIVE_INFOInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
DRIVE_INFODisplayQuery DRV_Info
LIBRARYLSMloc(lsm-id)
LSMloc(lsm-id)
DEVADDR(device-address)
ACtive
DRVLOC(drive-location)LIBLOC(drive-id)
MODel(
RECTech(
model-type )
recording-technique )
MODel( model-type )
RECTech( )recording-technique
MODel(
RECTech(
model-type )
recording-technique )VIRTual
Display EXceptns
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 55
Display EXceptnsInterfaces:
Console or PARMLIB UUI: No
Subsystem Requirements:
Active HSC at FULL service level
Display LMUPDEFInterfaces:
Console or PARMLIB UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
EXceptnsX
DisplayQuery
LMUPDEFDisplayQuery
Display LOCKs
56 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
Display LOCKsInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
Display LsmInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at FULL service level
LOCKsDisplayQuery
Lsmlsm-idlsm-range
)(,lsm-list
DisplayQuery
Display Message
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 57
Display MessageInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at BASE or FULL service level
Display MGMTDEFInterfaces:
Console or PARMLIB UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
MessageMsg
msgnumDisplayQuery msg-range
msg-list
Note: msg-range and msg-list are only valid when the Display Message command is issued from a utility or programmatic interface.
MGMTDEFDisplayQuery
Display MIGrate
58 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
Display MIGrateInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
Display MNTDInterfaces:
Console or PARMLIB UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
MIGrateDisplayQuery
AUTO(stor-clas-name)
VTSS(vtss-name)
VTSS(vtss-name) LISTVTVS
DETailDETail
DELAY(stor-clas-name)
MNTDDisplayQuery
Display MONitor
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 59
Display MONitorInterfaces:
Console or PARMLIB UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
Display MVCInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
MONitor,PGMI ,L( cc
name)
DisplayQuery
MVC(volser)DisplayQuery
Display MVCPool
60 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
Display MVCPoolInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
Display OPTionInterfaces:
Console or PARMLIB UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
MVCPoolNAME(poolname)
DisplayQuery STORCLAS(stor-clas-name)
OPTionDisplayQuery
Display PATH
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 61
Display PATHInterfaces:
Console or PARMLIB UUI: No
Subsystem Requirements:
Active HSC/VTCS
Display QueueInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
PATHDisplayQuery ( rtd-name
rtdname-list
)
VTSS(vtss-name)
CLINK
QueueDETail
VTSS(vtss-name)
DisplayQuery
Display REPlicat
62 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
Display REPlicatInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
Display RequestsInterfaces:
Console or PARMLIB UUI: Yes
Subsystem Requirements:
Active HSC at BASE or FULL service level
REPlicatDisplayQuery
RequestsDisplayQuery
Display RTD
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 63
Display RTDInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
Display SCRatchInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at BASE or FULL service level
RTD(rtd)(rtd-range)
(rtd-list)
QUeuedDisplayQuery
SCRatchacs-idlsm-idVSM
SUBpool(subpool-name)HOSTid(name)
MEDia(media-type) RECtech(recording-technique) ALLDETail
DisplayQuery
Display SEN
64 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
Display SENInterfaces:
Console or PARMLIB UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
Display SERVERInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
SENREQNAME= LNRNAME=
DisplayQuery
SERVERDisplayQuery
Display SRVlev
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 65
Display SRVlevInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at FULL service level
Display StatusInterfaces:
Console or PARMLIB UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
SRVlevDisplayQuery
StatusDisplayQuery
Display STORCLas
66 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
Display STORCLasInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
Display STORMNGRInterfaces:
Console or PARMLIB UUI: No
Subsystem Requirements:
Active HSC/VTCS
STORCLas(name)DETail MAXvtv(nnnn)
DisplayQuery
STORMNGR(name)DisplayQuery
Display TASKs
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 67
Display TASKsInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at BASE or FULL service level
Display THReshldInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at BASE or FULL service level
TASKsDisplayQuery
THReshldacs-idlsm-idVSM
SUBpool(subpool-name)HOSTid(name)
DETailMEDia(media-type) RECtech(recording-technique) ALL
DisplayQuery
Display Volser
68 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
Display VolserInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at BASE or FULL service level
Display VOLUME_INFOInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
vol-range
)(,vol-list
VolserVolume
volserDETail
DisplayQuery
VOLume_InfoDisplayQuery VOLser
ALL
vol-range
)(,vol-list
volser
Display VSCRatch
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 69
Display VSCRatchInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
Display VTDInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
VSCRatchDisplayQuery (subpool-name)
VTDACtive
VTSS(vtssname) ALlDisplayQuery
Display VTSS
70 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
Display VTSSInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
Display VTVInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
VTSSDETail
DisplayQuery VTSS(vtss-name)
VTV(vtv-id)DisplayQuery
DRAin
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 71
DRAinInterfaces:
Console or PARMLIB only UUI: No
Subsystem Requirements:
Active HSC at FULL service level
DRAinENter
EJectcap-id
(,cap-list )
DRTEST CREATE
72 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
DRTEST CREATEInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
DRTEST
DRVTSS(vtss1,vtss2,...vtssn)SPARE(vtss1,vtss2,...vtssn)
DRACS(acsid1,acsid2,...acsid16)
CREATE |Options|
Options:
HOSTID(hostid1,hostid2,...hostidn)
Note: CREATE is not valid when DRTEST is issued from the console.
NOUPDprd
STORMNGR(stormngr-list)
DRTEST PRIMEprd
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 73
DRTEST PRIMEprdInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
DRTEST PRIMEprd
DRVTSS(vtss1,vtss2,...vtssn)SPARE(vtss1,vtss2,...vtssn)
DRACS(acsid1,acsid2,...acsid16)
Options:
HOSTID(hostid1,hostid2,...hostidn)
|Options|
Note: PRIMEprd is not valid when DRTEST is issued from the console.
STORMNGR(stormngr-list)
DRTEST RESET
74 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
DRTEST RESETInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
DRTEST STARTInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at FULL service level
DRTEST RESET
Note: RESET is not valid when DRTEST is issued from the console.
DRTEST START
DRTEST STOP
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 75
DRTEST STOPInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at FULL service level
DRTEST STOP
EEXPORT
76 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
EEXPORTInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC not required
EEXPORT VTV( volservol-range
vol-list
)
MGMTclas( mgmt-class-name,mgmt-class-list
)
,
RECALWER(YES
NO)
TOPlex(name)
FORCE(NO
)
REJECTED(NO
ULINKMVC(volser)
YES
YES)
EJect
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 77
EJectInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at FULL service level
acs-idlsm-idcap-id
EJectOption2Option1
text
Option 1:
volservol-range
( vol-list )
( cap-list ),
WAITcap(NO
YES)
SEQ( NOYES
)
acs-idlsm-idcap-id
Option 2:
( cap-list ),
WAITcap(NO
YES)
SCRTCHSUBpool(subpool-name) VOLCNT(count)
MEDia(media-type) RECtech(recording-technique)
ENter
78 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
ENterInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at FULL service level
EXECParmInterfaces:
PARMLIB only UUI: No
Subsystem Requirements:
None
ENter00
acs-idlsm-idcap-id
TLSM(lsm-id) SCRatch
EXECParm
MSGPRFX(YesNo )
,Eid(gtfeid) ,Fid(gtffid)
,HOSTID(host-id)
EXPORT
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 79
EXPORTInterfaces:
Utility only UUI: Yes
Subsystem Requirements:
■ Active HSC/VTCS at FULL service level required when specifying the VTV, MGMTCLAS, or STORclas parameter.
■ Active HSC/VTCS not required when specifying the MVC parameter.
EXPORT VTV( volservol-range
vol-list
)
MGMTclas( mgmt-class-name,mgmt-class-list
)
MVC(volservol-range
vol-list
)
STORclas( storclas-name
storclas-list
)
,
,
MANIFEST(ddname)RECALWER(
YES
NO)
FMTLOG
80 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
FMTLOGInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
FMTLOG
IMPORT
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 81
IMPORTInterfaces:
Utility only UUI: Yes
Subsystem Requirements:
Active HSC/VTCS not required
IMPORT
vol-range
MVC( volservol-range
vol-list
IMMDRAIN( NOYES
)
VTV( volser
vol-list
)
)
,
,
REPLACE( NONEALL
)
MANIFEST(dd-name) NOUPDATE
INACTCDS OWNRPLEX(name)SETOWNER
INITialize
82 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
INITializeInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC at FULL service level
INITializeOptional Parameters
CAP(cap-id)PROGram( prog-name
IEHINITT) VERIFY(parameter-name)
CNTLDD(SYSINdd-name )
OPTION( EJEctSCRatch
)
Optional Parameters:
INVENTRY
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 83
INVENTRYInterfaces:
Utility only UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
LIBGenInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
INVENTRY MVCid( volservol-range,vol-list
CDScheck(NoneMvcFull
)
STOPleot(NOYES ) TERMerr(
NOYES )
)
LIBGen
LMUPDEF
84 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
LMUPDEFInterfaces:
Console or PARMLIB UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
LMUPATH Control Statement
LMUPATH ACS(aa) LMUADDR(lmu_hostnamennn.nnn.nnn.nnn
,) PARTID(00n) PING(tt)
LMUPATH ACS(aa) LMUADDR(lmu_hostnamennn.nnn.nnn.nnn
,) PARTID(00n) PING(tt)
LOGUTIL
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 85
LOGUTILInterfaces:
SLUADMIN utility only UUI: Yes
Subsystem Requirements:
Active HSC not required
LOGUTIL FOR_LOSTMVC Statement
LOGUTIL LOGDD(ddname)
FROMDATE(yyyy-mm-dd)
COMMANDS(ddname)
FROMTIME( hh:mm:ss00:00:01
)
TODATE(yyyy-mm-dd)
TOTIME( hh:mm:ss00:00:01
)
SCRATCH
FOR_LOSTMVC
COMMANDS(ddname)
MVC( volservolser-range
)
volser-list
VTV( volservolser-range
)
volser-list
LOGUTIL
86 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
LOGUTIL GENAUDIT Statement
LOGUTIL LOCATE_VTV
LOGUTIL UNDELETE Statement
GENAUDITCOMMANDS(ddname)
LOCATE_VTV
COMMANDS(ddname)
VTV( volservolser-range
)
volser-list
-1
-nnVERSION( )
DATE(yyy-mm-dd) TIME(hh:mm:ss)
UNDELETE VTV( volservolser-range
volser-list
)COMMANDS(ddname)
MERGEcds
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 87
MERGEcdsInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC at BASE service level only
SLSMERGE Control Statement
MERGEcdsVALIDate ALL NOMSG
Note: If ALL is not specified, MERGEcds reads the parameters specified in the SLSMERGE DD statement.
DELVirt
MERGE
MERGE
FLSM(lsm-id)
FVTSS(vtss-name)
TLSM(lsm-id)
TVTSS(vtss-name)
FVAULT(vault-name) TVAULT(vault-name)
ALLREAL
ALLVIRT
ALLVALT
NOREAL
NOVIRT
NOVALT
For REAL volumes:
If the CDS contains VIRTUAL data:
If the CDS contains VAULT data:
MERGE FACS(acs-id) TACS(acs-id)
MERGMFST
88 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
MERGMFSTInterfaces:
Utility only UUI: Yes
Subsystem Requirements:
Active HSC not required
MGMTDEF Interfaces:
Console or PARMLIB only UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
MERGMFST MERGEIN(manifin) MERGEOUT(manifout)
MGMTDEFDSN(dataset-name)DATASET(dataset-name)
VOLume(volser) UNIT(unitname)
HOSTID(host-id)
MGMTDEF
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 89
MGMTclas Control Statement
MGMTclas NAME(mgmt-class-name)ACSlist(acs-id | acs-id,acs-id)
DUPLEX(NOYES )
MAXVtvsz(400 | 800 | 2000 | 4000)
VTVPAGE(STANDard | LARGE)
DISCARD=9999nnnn
IMMDELAY=9999nnnn
NOMIGRAT
MIGpol(s1 | s1,s2 | s1,s2,s3 | s1,s2,s3,s4)
ARCHAge(nnn) ARCHPol(s1 | s1,s2 | s1,s2,s3 | s1,s2,s3,s4)
RESTIME(nnn)
CONSRC(stor-class-name) CONTGT(stor-class-name)DELSCR(
NOYES )
REPlicat(NOYESYES_SYNC
)
EEXpol(s1|s1,s2)
MGMTDEF
90 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
MIGRSEL Control Statement
MIGRVTV Control Statement
MVCATTR Control Statement
MIGRSELSTORclas(stor-clas-name) VTSS(vtssname)
HOST( host-id, FUNCtion(IMMED|AUTO|RECLAIM|DEMAND)
IMMWAIT( nnn999
) SCHPREF( n0
) SCHLIMIT( nn99
)
MIGRVTV
STORclas(stor-clas-name)
VTSS(vtssname)MGMTclas(mgmt-clas-name)
IMMDELAY(9999nnnn )
MVCATTR MEDIA(media-name) SWAPTO(device-type)
MGMTDEF
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 91
STORclas Control Statement
STORLST Control Statement
STORSEL Control Statement
STORclas NAME(stor-clas-name)
ACS(acs-id)
TAPEPLEX(name)SYNC( NO
YES)
MEDIA(list) MVCPOOL(poolname) MIGRATE( SENDERRECEIVEREITHER
)
FROMLST(vtss-list-name) INPLACE( YESNO
)
STORMNGR(name)
STORLST NAME(stor-list-name) STORclas( stor-class-name )
,PRIority(
5order )
,
STORSELFUNCtion(function)
HOST( host-id ),
MGMTclas(mgmt-class-name) VTSS(vtss-name)STORLST(stor-list-name)
MGMTDEF
92 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
VTSSLST Control Statement
VTSSSEL Control Statement
VTSSLST NAME(vtss-list-name) VTSS( vtss-name )
PRIority( order5
,
,
)
VTSSSELFUNCtion(function)
HOST( host-id,
)
MGMTclas(mgmt-class-name) PREVvtss(vtss-name)
STORclas(stor-class-name) MVCpool(pool-name)
VTSSLST(vtss-list-name)
MIGrate
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 93
MIGrateInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
Format 1
Format 2
MIGrate VTVid(,volser )
DSN(,name )
MGMTclas(,name )
DELETE(YESNO )
NOWAITvol-range
vol-list,
MIGrate
VTSS(,name )
THRESHLD(value)
MNTD
94 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
MNTDInterfaces:
Console or PARMLIB only UUI: No
Subsystem Requirements:
Active HSC at FULL service level
MNTD,AUTocln( OFf
ON)
Dismount( AutoManual
)
Ejctauto(
Float(
MAXclean(count)
MMount(
PASSTHRU(count)
Scratch(
SCRDISM(
ONMSgOFf
)
ONOFf
DeleteReply
)
ManualAuto
CURRENTARCHIVE
)
)
ACS(acs-id)
ACS(acs-id)
HOSTID(host-id)
)
MODify
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 95
MODifyInterfaces:
Console or PARMLIB only UUI: No
Subsystem Requirements:
Active HSC at FULL service level
MODify
lsm-range
)(,lsm-list
F
CONFIGRESET
CAP cap-idlsm-id
ONlineOFFline
LSMlsm-id ONline
OFFlineFORCE
ADD ACSType(SL3000SL8500 )
DELete ACS(acs-id)UPDate ACS(acs-id)
Mount
96 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
MountInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at FULL service level
Mount volser devaddr
host-id,
Readonly
Mount
SCRTCHPRIVAT
devaddrhost-id SUBpool(subpool-name) MEDia(media-type)
Mount volserSCRTCH
devaddrMGMTclas(mgmt-clas-name)
To mount a specific Nearline volume on a transport:
To mount a scratch volume on a transport:
To mount a VTV on a VTD and optionally, assign a management class to the VTV:
MOVe
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 97
MOVeInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at FULL service level
MOVe
TLsm(lsm-list)TPanel(panel)
| Parameters |
Parameters:
Flsm(lsm-id) Panel(panel-list)Row(row-list)
Column(column-list)
Volume(vol-list)
MVCDRain
98 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
MVCDRainInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
vol-range,vol-list
)volserMVCDRain MVCid(
MVCPOOL(poolname)STORCLAS(stor-clas-name)
EJect
RECALWER(YES
NO)
NOWAIT WARRANTY RETIRED
DATACHK
CONMVC(nn)
ERROR
MVCMAINT
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 99
MVCMAINTInterfaces:
Utility only UUI: Yes
Subsystem Requirements:
■ Active HSC/VTCS required if RENVTSS is specified
■ Can run in batch-only mode when there are no hosts active (on any LPAR) using the CDS that is to be updated
MVCMAINT
vol-range,vol-list
)volserMANIFEST(ddname)MVC( READONLY( ON )
LOST( ON ) ERROR( ON ) EJECT( )
INVLDMIR( ONOFF
)RETIRED( ) WARRANTY( ONOFF
)
REPLACED( NONEMEDIA
)
OFF
OFF OFF OFFON
ONOFF
RENVTSS(vtss-name)
MVCPLRPT
100 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
MVCPLRPTInterfaces:
Utility only UUI: Yes
Subsystem Requirements:
Active HSC not required
MVCPOOL(poolname) STORCLAS(stor-clas-name)
DETail
SUMmaryMVCPLRPT
MVCRPt
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 101
MVCRPtInterfaces:
Utility only UUI: Yes
Subsystem Requirements:
Active HSC not required
OFFload LOGFILEInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
MVCRPt
vol-range,vol-list
DETail
MVCid( volser )
CHECK WRITABLE
STORclas(storage-clas-name)ALLMANIFEST(ddname)
OFFLOAD LOGFILERESTARTLOGDSN(primary-log-file-dsn)
OPTION TITLE Control Statement
102 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
OPTION TITLE Control Statement
OPTION TITLE(identifying-string)TRACETRACEF
OPTion
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 103
OPTionInterfaces:
Console or PARMLIB only UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
OPTion
,
Dialog(OffBothConsoleLog
)
DISCmsg( SHowSUppress
)ACS(acs-id)
HOSTID(host-id)
DUPOFL(OFFON )
EJLimit(count)
ENTdup( ManualAuto
)
Output( UpperMixed
)
Repath( YesNoReply
)
SEN( ONOFF
)
Viewtime(count)
Warnmsg(minutes)
RECall
104 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
RECallInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
DSN(
MGMTCLAS(
name,
)
name,
)
RECALWER(YES
NO)
RECall
VTSS(,name )
NOWAIT
VTVid(,volser )vol-range
vol-list,
RECLaim
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 105
RECLaimInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
RECLaimMVCPOOL(poolname)STORCLAS(stor-clas-name)ACSid(acs-id)MVC( volser
vol-range
vol-list,
MAXMVC(nn) THRESH(nn)
ELAPSE(nnnn) NOWAITCONMVC(nn)
)
INPTHRSH(nn)
RECONcil
106 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
RECONcilInterfaces:
Utility only UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
RECOVerInterfaces:
Console or PARMLIB UUI: No
Subsystem Requirements:
Active HSC at FULL service level
RECONcil
CONMVC(nn) ELAPSE(nnnn)MAXMVC(nn)
STORclas(stor-class-name1...stor-clas-namen)MVC(mvc-list | mvc-range)
MGMTclas(mgmt-class-name1...mgmt-clas-namen)VTV(vtv-list | vtv-range)
POLICYdd(ddname)MOVEVTV
RECOVer host-idFORCE
RELease
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 107
RELeaseInterfaces:
Console or PARMLIB only UUI: No
Subsystem Requirements:
Active HSC at FULL service level
REPLaceallInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at BASE or FULL service level
RELease cap-id
REPLaceall
VOLser( vol-list,
)
RESTore
108 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
RESToreInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
HSC must be down (inactive)
RTV Utility
Note – This VTCS utility is a standalone utility executed using the SWSRTV program.
RESTore
RTV
VTVid( vol-list,
OUTUNIT(name)
)
MVCid(volser) INUNIT(name)
vol-rangevolser
ALLVTVS CPYVOLID LISTONLY BLOCKid(nnn) FILEnum(nnn)
DUMP VALIDATE
SCRAtch
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 109
SCRAtchInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at BASE or FULL service level
SCREdistInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC at FULL service level
SCRAtch VOLser(,vol-list )
ACS(acs-id)
LSM( lsm-list,
)SUBpool(subpool-name)
SCREdist
BALtol(tolerance-value) MEDia(media-type)
RECtech(recording-technique)
SENter
110 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
SENterInterfaces:
Console or PARMLIB only UUI: No
Subsystem Requirements:
Active HSC at FULL service level
SET CLNPRFX
Note – HSC must be shut down on all systems before changing the cleaning prefix.
Interfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
SENter cap-id
SET CLNPRFX(prefix)
SET COMPRFX
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 111
SET COMPRFXInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
SET DRVHOSTInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
SET COMPRFX(cmdhex)
SET DRVHOST( OFF )host-id
SET EJCTPAS
112 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
SET EJCTPASInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
SET FREEZEInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
SET EJCTPAS( )newpswd ,OLDPASS(oldpswd)
SET FREEZE( )ONOFf
FORLSMID(lsm-id),FORPANEL(panel)
SET HOSTID
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 113
SET HOSTIDInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
SET HSCLEVelInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
SET HOSTID(newhost),FORHOST(oldhost)
SET HSCLEVel(OFF),FORHOST(host-id)
SET LOGFILE
114 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
SET LOGFILEInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
SET MAJNAME
Note – HSC must be shut down on all systems before changing the QNAME.
Interfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
■ Active HSC not required
■ HSC must be shut down on all systems before changing the QNAME.
SET LOGFILE(,secondary-log-file-dsnOFF
primary-log-file-dsn
,OFF
)
IMMED
SET MAJNAME(qname)
SET MIGOPT
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 115
SET MIGOPTInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
SET NEWHOSTInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
SET MIGOPTVTSS(vtssname) MAXmig(nn) MINMIG(nn)
HIGHthld(nn) LOWthld(nn)
SET NEWHOST(newhost),LIKEHOST(model-host)
SET RMM
116 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
SET RMMInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC/VTCS
SET SCRLABLInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
SET RMMENableDISable
SET SCRLABL( )SLALNLNSL
SET SLIDRIVS
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 117
SET SLIDRIVS
Caution – For 9310 and 9740 libraries, Sun recommends you bring the HSC down on all hosts before specifying this parameter, and recycle the HSC after every SET SLIDRIVS operation.
Interfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
SET SLISTATNInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
SLIDRIVS(addr0
,...addr31
),FORLSMID(lsm-id) ,FORPANEL(panel)
,FORHOST(host-id)
SET
,MODEL(model-type)
SLISTATN(stat1,…,stat16
),FORACS(acs-id),FORHOST(host-id)
SET
SET SMF
118 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
SET SMFInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
SET TAPEPlexInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
SMF(libtype)SET
SET TAPEPlex(tapeplex-name)
SET TCHNIQE
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 119
SET TCHNIQEInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
TCHNIQE( NONEJOURNALSHADOWBOTHSTANDBYALL
)SET
SET VAULT
120 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
SET VAULTInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
SET VAULTVOLInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
VAULTADD NAME(cccc) SLOTS(nnnn)
DESC(aaaa) TMSNAME(bbbb)
MOD NAME(cccc)SLOTS(nnnn) DESC(aaaa) TMSNAME(bbbb) NEWNAME(cccc)
DEL NAME(cccc)
SET
VAULTVOL NBRVOLS (nnnnnn)SET
SET VOLPARM
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 121
SET VOLPARMInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
VOLPARM
APPLY(NO
YES)
SET
SET VOLPARM
122 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
POOLPARM Control Statement
VOLPARM Control Statement
POOLPARM
TYPE Parameters:
| TYPE Parameters |
TYPE(SCRATCH) NAME(nnnn)
HOSTid( hostid
TYPE(CLEAN)MAXclean(nn)
TYPE(MVC)NAME(nnnn)
NORECLAM
, DRTEST
DRTEST
LABEL(SLNLALNSL
)
NOMIGRAT
MVCFREE(nn) MAXMVC(nn) START(nn) THRESH(nn)
INITMVC( YESNO
)
TYPE(EXTERNAL)OWNRPLEX(tapeplex-name)
NAME(nnnn)
INPTHRSH(nn)
VOLPARMvol-range,vol-list
volser )MEDia(media-type)
RECtech(recording-technique)
VOLSER(
INITSCR DRTEST
SRVlev
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 123
SRVlevInterfaces:
Console or PARMLIB only UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
STOPMNInterfaces:
Console or PARMLIB only UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
SRVlev BASEFULL
STOPMNPM
PGMI,L(
ccname
)
SWitch
124 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
SWitchInterfaces:
Console or PARMLIB only UUI: No
Subsystem Requirements:
Active HSC at FULL service level
TRaceInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at BASE or FULL service level
SWitchAcs acs-id
Note: ACS acs-id is optional in a single ACS environment; it is required in a multi-ACS environment.
TRace comp-name
comp-list,OFF
TRACELKP
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 125
TRACELKPInterfaces:
Console or PARMLIB only UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
UEXITInterfaces:
Console or PARMLIB only UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
TRACELKP
table-list
table-name,
OFF table-name
UEXIT nn
nn
Load(name
SLSUXnn)
,Enable
,DisableEnableDisable
nn-range
( nn-list,
)
Query
UNSCratch
126 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
UNSCratchInterfaces:
Console or utility UUI: Yes
Subsystem Requirements:
Active HSC at BASE or FULL service level
UNSElectInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
UNSCratch VOLser( vol-list,
)
UNSElect VOLser(volser),FORCE
Vary
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 127
VaryInterfaces:
■ Console or PARMLIB (Vary ACS)
■ Console or utility, UUI All (Vary CLINK, RTD, or VTSS)
UUI: Yes
Subsystem Requirements:
■ Active HSC at FULL service level (Vary ACS)
■ Active HSC/VTCS (Vary CLINK, RTD, or VTSS)
Vary ACS acs-idacs-range
( acs-list )
STationdev-iddev-range
( dev-list )
OFFlineONline
FORCE
CLInk(clink-id) VTSS(vtssname) ONlineOFFline
RTD( rtd-idrtd-range
rtd-list,
) ONlineOFFlineMAINt
VTSS(name) OFFLineONlineQUIESCED
PATH( rtdname
rtdname-list
ONlineOFFlineMAINt
)
VIew
128 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
VIewInterfaces:
Console or PARMLIB only UUI: No
Subsystem Requirements:
Active HSC at FULL service level
VIew CApCAPID(00:00:00)
CAPID(cap-id)Lsm(lsm-id)
Row(00)
Row(rr)
Column(00)
Column(cc)
CEllLsm(00:00)
Lsm(lsm-id)
Panel(00:00)
Panel(pp)
Row(00:00)
Row(rr)
Column(00:00)
Column(cc)
DRive Address(xxx)Host(host-id)
PLaygrnd
PTp
Lsm(00:00)
Lsm(lsm-id)
Column(00:00)
Column(cc)
Lsm(00:00)
Lsm(lsm-id) Xlsm(ll)
Column(0)
Column(c)
Time(ttt)
VOLPCONV
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 129
VOLPCONVInterfaces:
SLUADMIN utility only UUI: No
Subsystem Requirements:
Active HSC not required
VOLPCONV
CLNPRFX(CLNprefix )
VOLRpt
130 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
VOLRptInterfaces:
Utility only UUI: Yes
Subsystem Requirements:
Active HSC not required
VOLRpt
vol-range,vol-list
ACS(acs-id)
LSM( lsm-list )
VOLser( volser
VOLume(vol-range
,vol-list
)volser
SORT(VOLINSLOCSEL
)ASCend
NOSORT
INCLude(
,*SCRNONSCRERRNONERRSELNONSELREADableUNREADableMEDEQUALNONMEDEQ
NOEXTernal
EXCLude(,
SCRNONSCRERRNONERRSELNONSELREADableUNREADableMEDEQUALNONMEDEQ
NOEXTernal
))
NOVOL SUMMary( TOTalSUBpoolTOTal,SUBpool
)
)
,
MAXclean(nnnn)
USEMWL
VAULT
MWLNAMWLGE nnn
MWLNAMWLGE nnn
DEScend
VTVMAINT
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 131
VTVMAINTInterfaces:
Utility only UUI: Yes
Subsystem Requirements:
Active HSC not required
VTVMAINT
MGMTclas(mgmt-clas-name)
VTVid(
vol-list
vol-rangevolser
,
)ULINKMVC
(volser)
DISMOUNT VTSSid(name)
OWNRPLEX(name) DELEXpot(name) ADDEXpot(name)
RENVTSS(vtss-name)
VTVRPt BASIC
132 ELS 7.1 Syntax Quick Reference • October 2010 Revision AA
VTVRPt BASICInterfaces:
Utility only UUI: Yes
Subsystem Requirements:
Active HSC not required
VTVRPt COPIESInterfaces:
Utility only UUI: Yes
Subsystem Requirements:
Active HSC not required
VTVRPtVTVid( volser
vol-range
vol-list,
)
MANIFEST(ddname)
ALLOPTION(UNAVAIL)SUPEMPTY
BASIC
VTVRPtVTVid( volser
vol-range
vol-list,
)
MANIFEST(ddname)
COPIESALLOPTION(UNAVAIL)SUPEMPTY
Warn
Revision AA Chapter 2 HSC and VTCS Commands and Control Statements 133
WarnInterfaces:
Console or PARMLIB only UUI: No
Subsystem Requirements:
Active HSC at BASE or FULL service level
WarnSUBpool(subpool-name)
SCRatch acs-idlsm-idVSM
THReshld(threshold-value)
MEDia(media-type) RECtech( recording-technique )