Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
1000 Top Sheet Cover Width
Brackets Typically @ 1167
166.7
32
Elite System 1
Bracket Height
Insulation
Thickness
Insulation
Value
Overall System
Depth
U Value at 1.5M
Centres
100mm Quattro 100mm 0.040 133mm 0.45
200mm Quattro 200mm 0.040 233mm 0.23
Varies - See Table
Varies - See Table
180mm Quattro 180mm 0.040 213mm 0.25
220mm Quattro 220mm 0.040 253mm 0.20
240mm Quattro 240mm 0.040 273mm 0.19
260mm Quattro 260mm* 0.040 293mm 0.17
280mm Quattro 280mm 0.040 313mm 0.16
12.60
13.64
13.90
14.16
14.42
14.68
14.95
Nominal Weight/M²
Knauf Rockwool
14.10
16.34
16.90
17.46
18.02
18.58
19.15
Minimum recommended pitch 4°
* Rockwool not available in standard thickness, weights calculated to next available thickness
Other U Values available please consult Euroclad
80mm Quattro 80mm 0.040 113mm 0.57
12.34 13.54
** * *
* * * *
*Fixings with an asterix are required on sheet ends and end laps only.
*
TITLE: Elite System 1
DWG NO: E1
DRAWN: MP
DATE: June 19
CHECK: PCL
SCALE: NTS
ELITE SYSTEMS
To be read in conjunction with
Elite System specification
documents
See drawing numbers FR18 and
FR15 for non-fragile fixing
requirements
This draft drawing has been
supplied by Euroclad Group Ltd
for the purpose of guidance free
of charge. It is a suggested
typical detail and as such should
not be assumed suitable for any
specific project or application.
No responsibility is assumed for
errors or misinterpretations
resulting from the information
contained in the drawing. Details
are for illustration only and no
liability is accepted. We reserve
the right to change the details
without notice.The drawing is
copyright, it remains our
property.
Fax: +44 (0)2922 010 122
www.euroclad.com
Tel: +44 (0)2922 010 101
Euroclad EC 19-167-1000 Liner
19_2L side lap
COLOUR SIDE
ELITE SYSTEM 1 SIDE LAP DETAIL
ELITE SYSTEM 1 END LAP DETAIL
Euroclad EC 19-167-1000 Liner 19_2L
0.4mm Steel
Euroclad EC 32-167-1000 Roof 32_1F
or Euroclad EC 32-167-1000 Roof 32_5F
by request both 0.7mm steel
50mm x 1mm butyl sealing tape
Quattro bar & bracket to required
depth typically @ 1.167m centres
6 x 5 class A butyl
Stitcher at 450mm centres
Fixings in alternate troughs on intermediate
supports and in all troughs at sheet ends & end laps
Quattro bar & bracket
4mm Bead class A
butyl sealant
Euroclad EC 19-167-1000 Liner 19_2L
0.4mm Steel
COLOUR SIDE
Euroclad
EC 32-167-1000 Roof 32_5F
0.7mm Steel
side lap detail
Euroclad
EC 32-167-1000 Roof 32_1F
0.7 Steel Outer
Sheet side lap detail
COLOUR SIDE
150
15
15
Euroclad EC 32-167-1000 Roof 32_1F
or Euroclad EC 32-167-1000 Roof 32_5F
by request, both 0.7mm steel
M
ax 75
M
ax 75
*
*
*
M
in 80
M
in 30m
m
50m
m
(M
in 30m
m
)
Class A butyl sealant:
Standard: ≥ 4° finished
pitch 2 rows 6x5mm
Curved roof crown sheet end
laps 2.5°-3.9° finished pitch-
upper row 6 x5mm
lower row 8mm dia
TITLE: Elite System 1
DWG NO: E1
DRAWN: MP
DATE: June 19
CHECK: PCL
SCALE: NTS
ELITE SYSTEMS
To be read in conjunction with
Elite System specification
documents
See drawing numbers FR18 and
FR15 for non-fragile fixing
requirements
This draft drawing has been
supplied by Euroclad Group Ltd
for the purpose of guidance free
of charge. It is a suggested
typical detail and as such should
not be assumed suitable for any
specific project or application.
No responsibility is assumed for
errors or misinterpretations
resulting from the information
contained in the drawing. Details
are for illustration only and no
liability is accepted. We reserve
the right to change the details
without notice.The drawing is
copyright, it remains our
property.
Fax: +44 (0)2922 010 122
www.euroclad.com
Tel: +44 (0)2922 010 101
8
5
167
1
2
9
°
1000
32
1
23
94
23
22
COLOUR SIDE
4
3
9
COVERWIDTH
COLOUR SIDE
Not to be used upslope of an inplane rooflight where rooflight side laps over lap metal sheets to both sides
COLOUR SIDE
COLOUR SIDE
167167
104
19
R
4
22
2
8
1
3
7
°
1
0
1000
18
23
94
1
2
9
°
0,7
1000
32
22
23
73
167COLOUR SIDE
1
8
3
5
69
3
9
COLOUR SIDE
COVERWIDTH
Must be utilised upslope of an inplane rooflight detail where rooflight side laps over lap metal sheets to both sides
EUROCLAD EC 19-167-1000 Liner 19_2L 0.4mm
EUROCLAD EC 32-167-1000 Roof 32_1F 0.7mm
TITLE: Elite System 1
DWG NO: E1
DRAWN: MP
DATE: June 19
CHECK: PCL
SCALE: NTS
ELITE SYSTEMS
To be read in conjunction with
Elite System specification
documents
See drawing numbers FR18 and
FR15 for non-fragile fixing
requirements
This draft drawing has been
supplied by Euroclad Group Ltd
for the purpose of guidance free
of charge. It is a suggested
typical detail and as such should
not be assumed suitable for any
specific project or application.
No responsibility is assumed for
errors or misinterpretations
resulting from the information
contained in the drawing. Details
are for illustration only and no
liability is accepted. We reserve
the right to change the details
without notice.The drawing is
copyright, it remains our
property.
Fax: +44 (0)2922 010 122
www.euroclad.com
Tel: +44 (0)2922 010 101
EUROCLAD EC 32-167-1000 Roof 32_5F 0.7mm
40
Brackets less than 260mm require
2 fixings diagonally opposite.
Brackets 260mm or more require
4 fixings.
< 260mm
≥ 260mm
40
33
34
60
59
VARIES D
EPEN
DIN
G
ON
BRACKET H
EIG
HT
VARIES D
EPEN
DIN
G
ON
BRACKET H
EIG
HT
SIDE ELEVATION
Maximum bar cantilever at free
ends is 300mm.
Spigot can fall anywhere between
two brackets.
TITLE: Elite System 1
DWG NO: E1
DRAWN: MP
DATE: June 19
CHECK: PCL
SCALE: NTS
ELITE SYSTEMS
To be read in conjunction with
Elite System specification
documents
See drawing numbers FR18 and
FR15 for non-fragile fixing
requirements
This draft drawing has been
supplied by Euroclad Group Ltd
for the purpose of guidance free
of charge. It is a suggested
typical detail and as such should
not be assumed suitable for any
specific project or application.
No responsibility is assumed for
errors or misinterpretations
resulting from the information
contained in the drawing. Details
are for illustration only and no
liability is accepted. We reserve
the right to change the details
without notice.The drawing is
copyright, it remains our
property.
Fax: +44 (0)2922 010 122
www.euroclad.com
Tel: +44 (0)2922 010 101
Liner Flashing fixed and sealed to masonry
9x3mm Mastic Sealant
Euroclad EC 19-167-1000 Liner 19_2L 0.4mm Steel
Quattro Bar & Bracket
Euroclad EC 32-167-1000 Roof 32_1F
0.7mm Steel
External Flashing
Apron flashing chased into masonry
9x3mm Mastic Sealant
9x3mm Mastic Sealant
EUROCLAD ELITE SYSTEM 1 ROOF CONSTRUCTION
*
*
*
Insulation excluded for clarity
A range of mineral & glass wool insulations are available
for different requirements
*Fixings with an asterix are required on sheet ends and end laps only.
*
TITLE: Elite System 1
DWG NO: E1
DRAWN: MP
DATE: June 19
CHECK: PCL
SCALE: NTS
ELITE SYSTEMS
To be read in conjunction with
Elite System specification
documents
See drawing numbers FR18 and
FR15 for non-fragile fixing
requirements
This draft drawing has been
supplied by Euroclad Group Ltd
for the purpose of guidance free
of charge. It is a suggested
typical detail and as such should
not be assumed suitable for any
specific project or application.
No responsibility is assumed for
errors or misinterpretations
resulting from the information
contained in the drawing. Details
are for illustration only and no
liability is accepted. We reserve
the right to change the details
without notice.The drawing is
copyright, it remains our
property.
Fax: +44 (0)2922 010 122
www.euroclad.com
Tel: +44 (0)2922 010 101
Liner Flashing and fillers fixed and sealed to liners
to provide air tightness and vapour control
9x3mm Mastic Sealant
Euroclad EC 19-167-1000 Liner 19_2L 0.4mm Steel
Quattro Bar & Bracket
Euroclad EC 32-167-1000 Roof 32_1F
0.7mm Steel
External Flashing
Vented Profile Filler
9x3mm Mastic Sealant
EUROCLAD ELITE SYSTEM 1 ROOF CONSTRUCTION
*
*
*
*
Insulation excluded for clarity
A range of mineral & glass wool insulations are available
for different requirements
*Fixings with an asterix are required
on sheet ends and end laps only.
TITLE: Elite System 1
DWG NO: E1
DRAWN: MP
DATE: June 19
CHECK: PCL
SCALE: NTS
ELITE SYSTEMS
To be read in conjunction with
Elite System specification
documents
See drawing numbers FR18 and
FR15 for non-fragile fixing
requirements
This draft drawing has been
supplied by Euroclad Group Ltd
for the purpose of guidance free
of charge. It is a suggested
typical detail and as such should
not be assumed suitable for any
specific project or application.
No responsibility is assumed for
errors or misinterpretations
resulting from the information
contained in the drawing. Details
are for illustration only and no
liability is accepted. We reserve
the right to change the details
without notice.The drawing is
copyright, it remains our
property.
Fax: +44 (0)2922 010 122
www.euroclad.com
Tel: +44 (0)2922 010 101
Euroclad EC 19-167-1000 Liner
19_2L 0.4mm Steel
Euroclad EC 32-167-1000 Wall 32_6Rev
Quattro Bar & Bracket
Internal Liner Flashing (may not be required
where eaves beam is present)
Liner Flashing/ Eaves Beam and fillers fixed and sealed
to liners to provide air tightness and vapour control
Vented Profile Filler
Euroclad Gutter Flashing
Euroclad EC 32-167-1000 Roof 32_1F
0.7mm Steel
Vented Profile Filler
Euroclad Gutter Straps
typically at 1m centres
Euroclad EC 19-167-1000 Liner 19_2L 0.4mm Steel
Quattro Bar & Bracket
Euroclad Eaves Flashing
Profile Filler
EUROCLAD ELITE SYSTEM 1 ROOF CONSTRUCTION
EUROCLAD ELITE SYSTEM 51 WALL CONSTRUCTION
Insulation excluded for clarity
A range of mineral & glass wool insulations are available for different requirements
TITLE: Elite System 1
DWG NO: E1
DRAWN: MP
DATE: June 19
CHECK: PCL
SCALE: NTS
ELITE SYSTEMS
To be read in conjunction with
Elite System specification
documents
See drawing numbers FR18 and
FR15 for non-fragile fixing
requirements
This draft drawing has been
supplied by Euroclad Group Ltd
for the purpose of guidance free
of charge. It is a suggested
typical detail and as such should
not be assumed suitable for any
specific project or application.
No responsibility is assumed for
errors or misinterpretations
resulting from the information
contained in the drawing. Details
are for illustration only and no
liability is accepted. We reserve
the right to change the details
without notice.The drawing is
copyright, it remains our
property.
Fax: +44 (0)2922 010 122
www.euroclad.com
Tel: +44 (0)2922 010 101
A
pprox 75m
m
M
ax 300m
m
Euroclad EC 19-167-1000 Liner
19_2L 0.4mm Steel
Elite Raintite Insulated Valley Gutter sealed
to liner and filler to provide air
tightness and vapour control
Quattro Bar & Bracket
Euroclad EC 32-167-1000 Roof 32_1F
0.7mm Steel
Closure Flashing
Vented Profile Filler
Gutter support strap 50 x 6mm
Insulation excluded for clarity
A range of mineral & glass wool insulations are available for different requirements
TITLE: Elite System 1
DWG NO: E1
DRAWN: MP
DATE: June 19
CHECK: PCL
SCALE: NTS
ELITE SYSTEMS
To be read in conjunction with
Elite System specification
documents
See drawing numbers FR18 and
FR15 for non-fragile fixing
requirements
This draft drawing has been
supplied by Euroclad Group Ltd
for the purpose of guidance free
of charge. It is a suggested
typical detail and as such should
not be assumed suitable for any
specific project or application.
No responsibility is assumed for
errors or misinterpretations
resulting from the information
contained in the drawing. Details
are for illustration only and no
liability is accepted. We reserve
the right to change the details
without notice.The drawing is
copyright, it remains our
property.
Fax: +44 (0)2922 010 122
www.euroclad.com
Tel: +44 (0)2922 010 101
A
pprox 50m
m
M
ax 300m
m
Euroclad EC 19-167-1000 Liner 19_2L 0.4mm Steel
Internal Liner Flashing (may not be required
where eaves beam is present)
Quattro Bar & Bracket
Liner Flashing/ Eaves Beam and fillers fixed and sealed
to liners to provide air tightness and vapour control
Ridge Flashing
Euroclad EC 32-167-1000 Roof 32_1F
0.7mm Steel
Vented Profile Filler ( Approx 75mm from edge of flashing )
Quattro Bar & Bracket
Vented Profile Filler
Euroclad EC 32-167-1000 Wall 32_6Rev
EUROCLAD ELITE SYSTEM 1 ROOF CONSTRUCTION
EUROCLAD ELITE SYSTEM 51 WALL CONSTRUCTION
Insulation excluded for clarity
A range of mineral & glass wool insulations are available for different requirements
Profile Filler
TITLE: Elite System 1
DWG NO: E1
DRAWN: MP
DATE: June 19
CHECK: PCL
SCALE: NTS
ELITE SYSTEMS
To be read in conjunction with
Elite System specification
documents
See drawing numbers FR18 and
FR15 for non-fragile fixing
requirements
This draft drawing has been
supplied by Euroclad Group Ltd
for the purpose of guidance free
of charge. It is a suggested
typical detail and as such should
not be assumed suitable for any
specific project or application.
No responsibility is assumed for
errors or misinterpretations
resulting from the information
contained in the drawing. Details
are for illustration only and no
liability is accepted. We reserve
the right to change the details
without notice.The drawing is
copyright, it remains our
property.
Fax: +44 (0)2922 010 122
www.euroclad.com
Tel: +44 (0)2922 010 101
Elite Raintite Insulated Valley Gutter sealed
to liner and filler to provide air
tightness and vapour control
Euroclad EC 32-167-1000 Roof 32_1F
0.7mm Steel
Euroclad EC 19-167-1000 Liner 19_2L 0.4mm Steel
Quattro Bar & Bracket
Vented Profile Filler
Closure Flashing
Profile Filler
Euroclad EC 19-167-1000
Liner 19_2L 0.4mm Steel
Euroclad EC 32-167-1000 Wall 32_6Rev
Sealant
Closure Flashing
Capping Flashing
Profile Filler
Insulation excluded for clarity
A range of mineral & glass wool insulations are available for different requirements
EUROCLAD ELITE SYSTEM 1 ROOF CONSTRUCTION
Profile Filler
TITLE: Elite System 1
DWG NO: E1
DRAWN: MP
DATE: June 19
CHECK: PCL
SCALE: NTS
ELITE SYSTEMS
To be read in conjunction with
Elite System specification
documents
See drawing numbers FR18 and
FR15 for non-fragile fixing
requirements
This draft drawing has been
supplied by Euroclad Group Ltd
for the purpose of guidance free
of charge. It is a suggested
typical detail and as such should
not be assumed suitable for any
specific project or application.
No responsibility is assumed for
errors or misinterpretations
resulting from the information
contained in the drawing. Details
are for illustration only and no
liability is accepted. We reserve
the right to change the details
without notice.The drawing is
copyright, it remains our
property.
Fax: +44 (0)2922 010 122
www.euroclad.com
Tel: +44 (0)2922 010 101
EUROCLAD ELITE SYSTEM 1 ROOF CONSTRUCTION
Euroclad EC 32-167-1000 Roof 32_1F
0.7mm Steel
Quattro Bar & Bracket
Euroclad EC 19-167-1000 Liner 19_2L 0.4mm Steel
Profile Filler
Liner Flashing fillers fixed and sealed to liners to
provide air tightness and vapour control
Ridge Flashing
Vented Profile Filler ( Approx 75mm from edge of flashing )
Insulation excluded for clarity
A range of mineral & glass wool insulations are available for different requirements
TITLE: Elite System 1
DWG NO: E1
DRAWN: MP
DATE: June 19
CHECK: PCL
SCALE: NTS
ELITE SYSTEMS
To be read in conjunction with
Elite System specification
documents
See drawing numbers FR18 and
FR15 for non-fragile fixing
requirements
This draft drawing has been
supplied by Euroclad Group Ltd
for the purpose of guidance free
of charge. It is a suggested
typical detail and as such should
not be assumed suitable for any
specific project or application.
No responsibility is assumed for
errors or misinterpretations
resulting from the information
contained in the drawing. Details
are for illustration only and no
liability is accepted. We reserve
the right to change the details
without notice.The drawing is
copyright, it remains our
property.
Fax: +44 (0)2922 010 122
www.euroclad.com
Tel: +44 (0)2922 010 101
EUROCLAD ELITE SYSTEM 1 ROOF CONSTRUCTION
Insulation excluded for clarity
A range of mineral & glass wool insulations are available for different requirements
Min
80
Min
80
150
150
15
15
15
15
150
15 m
ax
15 m
ax
2no 6 x 5 Class A seal
Downslope sealant to be 8mm dia if end lap
pitch is between 2.5 degrees to 3.9 degrees
Self curved ridge sheet
Euroclad EC 32-167-1000 Roof 32_1F
0.7mm Steel
Self curved ridge sheet
Euroclad EC 19-167-1000 Liner 19_2L 0.4mm Steel
Quattro Bar & Bracket
M
ax 75
M
ax 75
M
ax 75
M
ax 75
M
ax 75
M
ax 75
NOTE: For curved roofs the steelwork must provide for finished
minimum pitch after settlement and deflections of ≥ 2.5° at purlins
which are to receive external crown sheet end laps.
Purlins at these locations should be considered critical and the use of a
wider top flange may be considered. A purlin is recommended to be
positioned at or close to the apex point of the curve to ensure drainage.
4mm Bead class A
butyl sealant
M
in 80
M
in 30m
m
50m
m
(M
in 30m
m
)
TITLE: Elite System 1
DWG NO: E1
DRAWN: MP
DATE: June 19
CHECK: PCL
SCALE: NTS
ELITE SYSTEMS
To be read in conjunction with
Elite System specification
documents
See drawing numbers FR18 and
FR15 for non-fragile fixing
requirements
This draft drawing has been
supplied by Euroclad Group Ltd
for the purpose of guidance free
of charge. It is a suggested
typical detail and as such should
not be assumed suitable for any
specific project or application.
No responsibility is assumed for
errors or misinterpretations
resulting from the information
contained in the drawing. Details
are for illustration only and no
liability is accepted. We reserve
the right to change the details
without notice.The drawing is
copyright, it remains our
property.
Fax: +44 (0)2922 010 122
www.euroclad.com
Tel: +44 (0)2922 010 101
Optional Closer Flashing
notched over spacer bar
10mm Polycarbonate sheet
Primary fixing @ every trough,
poppy red primary fixing; 29mm
washers poppy red caps
50 x 1 vapour flex type seal
Stitcher & seal fixing standard
self tapper @ max 400mm centres
2 no 6 x 5 Class A
seal recommended
within 15mm of fixing
Roof light Class 3 SAB
Optional Closer Flashing
6 x 5 Class A seal
Optional Closer Flashing
Quattro Bar & Bracket
Insulation
10mm Polycarbonate
sheet
1
5
0
m
m
M
in
E
n
d
L
a
p
1
2
0
m
m
E
n
d
L
a
p
1
2
0
m
m
E
n
d
L
a
p
Roof light liner Class 1 SAA
19-167-1000 Liner 19_2L
Stitcher & seal fixing standard
self tapper @ max 400mm centres
Roof light Class 3 SAB
32-167-1000 Roof 32_5F
Optional Closer Flashing
6 x 5 Class A seal
10mm Polycarbonate sheet
Roof light liner Class 1 SAA
19-167-1000 Liner 19_2L
10mm Polycarbonate sheet
50 x 1 vapour flex type seal
ROOF LIGHT
A
p
p
r
o
x
7
5
m
m
9 x 3 Class A seal9 x 3 Class A seal
Roof light Class 3 SAB
32-167-1000 Roof 32_5F
Optional Closer Flashing
6 x 5 Class A seal
10mm Polycarbonate sheet
Roof light liner Class 1 SAA
19-167-1000 Liner 19_2L
9 x 3 Class A seal
Note: Euroclad EC 32-167-1000 Roof 32_5F
0.7mm steel upslope of rooflight, please refer to profile drawing
2 no 6 x 5 Class A seal recommended within
15mm of fixing
1
5
0
m
m
M
in
E
n
d
L
a
p
9 x3 Class A seal
9 x 3 Class A seal
M
in
5
0
m
m
M
in
5
0
m
m
6 x 5 Class A seal
1
2
0
m
m
E
n
d
L
a
p
m
in
5
0
m
m
m
in
5
0
m
m
6 x 5 Class A seal
M
a
x
1
5
m
m
6 x 5 Class A seal 15 mm from lap joint*
M
a
x
1
5
m
m
6 x 5 Class A seal
15 mm from lap joint*
M
a
x
1
5
m
m
6 x 5 Class A seal
15 mm from lap joint*
1
2
0
m
m
E
n
d
L
a
p
m
in
5
0
m
m
m
in
3
0
m
m
For Non Fragility Classification:
Minimum GRP sheet edge distance to fixing is 50mm
Minimum steel sheet edge distance to fixing is 30mm
Vented Profile Filler
10mm Polycarbonate
sheet
Roof light liner Class 1 SAA
19-167-1000 Liner 19_2L
Class A butyl external sheet endlap sealant lower run:
Standard: ≥ 4° finished pitch 6x5mm
Curved roof crown sheet end laps
2.5°-3.9° finished pitch - 8mm dia
*Quattro bracket can land within rooflight void
Interlay layer to be notched as required
m
in
5
0
m
m
m
in
3
0
m
m
m
in
5
0
m
m
m
in
3
0
m
m
6 x 5 Class A seal
Roof light Class 3 SAB
32-167-1000 Roof 32_5F to overlap
metal sheet both sides
6 x 5 Class A seal
Roof light Class 3 SAB
32-167-1000 Roof 32_5F to overlap
metal sheet both sides
TITLE: Elite System 1
DWG NO: E1
DRAWN: MP
DATE: June 19
CHECK: PCL
SCALE: NTS
ELITE SYSTEMS
To be read in conjunction with
Elite System specification
documents
See drawing numbers FR18 and
FR15 for non-fragile fixing
requirements
This draft drawing has been
supplied by Euroclad Group Ltd
for the purpose of guidance free
of charge. It is a suggested
typical detail and as such should
not be assumed suitable for any
specific project or application.
No responsibility is assumed for
errors or misinterpretations
resulting from the information
contained in the drawing. Details
are for illustration only and no
liability is accepted. We reserve
the right to change the details
without notice.The drawing is
copyright, it remains our
property.
Fax: +44 (0)2922 010 122
www.euroclad.com
Tel: +44 (0)2922 010 101
Max 300mm
VERGE
Euroclad EC 19-167-1000 Liner 19_2L 0.4mm Steel
Euroclad EC 32-167-1000 Wall 32_6Rev
Quattro bar & bracket
Euroclad EC 32-167-1000 Roof 32_1F
0.7mm Steel
Quattro Bar & Bracket
Verge Flashing
Liner Flashing/ Eaves Beam and fillers fixed
and sealed to liners to provide air tightness
and vapour control
Vented Profile Filler
Liner Profile Filler
EUROCLAD ELITE SYSTEM 1 ROOF CONSTRUCTION
EUROCLAD ELITE SYSTEM 51 WALL CONSTRUCTION
Insulation excluded for clarity
A range of mineral & glass wool insulations are available for different requirements
*
*
*
*
*Fixings with an asterix are required on sheet ends and end laps only.
Max 300m
m
TITLE: Elite System 1
DWG NO: E1
DRAWN: MP
DATE: June 19
CHECK: PCL
SCALE: NTS
ELITE SYSTEMS
To be read in conjunction with
Elite System specification
documents
See drawing numbers FR18 and
FR15 for non-fragile fixing
requirements
This draft drawing has been
supplied by Euroclad Group Ltd
for the purpose of guidance free
of charge. It is a suggested
typical detail and as such should
not be assumed suitable for any
specific project or application.
No responsibility is assumed for
errors or misinterpretations
resulting from the information
contained in the drawing. Details
are for illustration only and no
liability is accepted. We reserve
the right to change the details
without notice.The drawing is
copyright, it remains our
property.
Fax: +44 (0)2922 010 122
www.euroclad.com
Tel: +44 (0)2922 010 101
VALLEY GUTTER
Elite Raintite Insulated Valley Gutter sealed
to liner and filler to provide air
tightness and vapour control
Quattro Bar & Bracket
Profile Filler
Euroclad EC 32-167-1000 Roof 32_1F
0.7mm Steel
Closure Flashing
Vented Profile Filler
EUROCLAD ELITE SYSTEM 1 ROOF CONSTRUCTION
Insulation excluded for clarity
A range of mineral & glass wool insulations are available for different requirements
Euroclad EC 19-167-1000 Liner 19_2L 0.4mm Steel
Gutter support strap 50 x 6mm
TITLE: Elite System 1
DWG NO: E1
DRAWN: MP
DATE: June 19
CHECK: PCL
SCALE: NTS
ELITE SYSTEMS
To be read in conjunction with
Elite System specification
documents
See drawing numbers FR18 and
FR15 for non-fragile fixing
requirements
This draft drawing has been
supplied by Euroclad Group Ltd
for the purpose of guidance free
of charge. It is a suggested
typical detail and as such should
not be assumed suitable for any
specific project or application.
No responsibility is assumed for
errors or misinterpretations
resulting from the information
contained in the drawing. Details
are for illustration only and no
liability is accepted. We reserve
the right to change the details
without notice.The drawing is
copyright, it remains our
property.
Fax: +44 (0)2922 010 122
www.euroclad.com
Tel: +44 (0)2922 010 101
EUROCLAD ELITE SYSTEM 1 ROOF CONSTRUCTION
Allow adequate clearance for thermal
movement between inner & outer
flashings
Allow adequate clearance
for thermal movement
between inner & outer
flashings
Ensure continuity of insulation
around penetration
Internal flashing sealed to
liner and pipe/flue to provide
continuity of vapour control/
air tightness
Insulation, Hardrock may
be required depending on
size of opening
Euroclad pre-fabricated soaker sheet
or Rollaflex
Euroclad pre-fabricated internal
soaker sealed and fixed to liner sheet
and pipe
Liner sheet with site cut opening
Collar drip fixed and sealed to pipe
dressed over soaker upstand
Profiled fillers bedded in sealant
**
* *
*Fixings with an asterix are required on sheet ends and end laps only.
TITLE: Elite System 1
DWG NO: E1
DRAWN: MP
DATE: June 19
CHECK: PCL
SCALE: NTS
ELITE SYSTEMS
To be read in conjunction with
Elite System specification
documents
See drawing numbers FR18 and
FR15 for non-fragile fixing
requirements
This draft drawing has been
supplied by Euroclad Group Ltd
for the purpose of guidance free
of charge. It is a suggested
typical detail and as such should
not be assumed suitable for any
specific project or application.
No responsibility is assumed for
errors or misinterpretations
resulting from the information
contained in the drawing. Details
are for illustration only and no
liability is accepted. We reserve
the right to change the details
without notice.The drawing is
copyright, it remains our
property.
Fax: +44 (0)2922 010 122
www.euroclad.com
Tel: +44 (0)2922 010 101