ELITE / ESPRIT Series

DS ELITEESPRIT-1

Features

• Very Long Range:

• LoRA Spread Spectrum,

• FM Technology

• 4 Channels Each Rated 1KW

• Relay Changeover Contacts

• Momentary or Latching or Timed

• Pair any Tx Switch to Any Rx O/P

• Power Supply either:

• 6-32Vdc/ac, 110Vac or 230Vac

• IP68 Waterproof Enclosure

• Signal Strength LED Indication

• Transmits RF Acknowledge signal

back to Transmitter

• Optional External Antenna mount

• Systems supplied ’ready to Go’

• Connections Via Screw Terminals

Applications

• Garden Lighting

• Pond pumps

• Remote outdoor Switching

• Industrial control

Compatible with All RF Solutions 868 / 918MHz Transmitters

Description

A versatile general purpose Remote Control System for many different applications.

Housed in a rugged IP68 enclosure, This receiver is ideally suited to any outside Remote

switching. It has 4 changeover relay outputs, using the ‘easy-learn’ process each output

can be controlled from one or many switches form one or many transmitters.

16KM Range Professional Receiver

Part No Description Supply Voltage

ELITE-8R4 Receiver 4 Channel 868MHz 230Vac or 6-32Vdc

ESPRIT-9R4 Receiver 4 Channel 918MHz 110Vac or 6-32Vdc

ESPRIT & ELITE Receivers

DS ELITEESPRIT-1 Page 2

Timer Erase Mode Pair

Supply

Either ac or dc

NOT Both!

~AC DC

Relaxed Active

NO COM NCNO COM NC

Relay OperationLink fitted - MOMENTARY

Link Removed - LATCHING

LED sPower

Transmit

Receive

RF Signal Strength LED Indication

Relay

Configuring the Receiver

Relay Outputs Each output relay is an independent isolated

switch. capable of switching 1KW

(5A @ 230V).

Fuse Rating 4A

ESPRIT & ELITE Receivers

DS ELITEESPRIT-1 Page 3

Timer Erase Mode Pair

Supply

Either ac or dc

NOT Both!

~AC DC

Relaxed Active

NO COM NCNO COM NC

Relay OperationLink fitted - MOMENTARY

Link Removed - LATCHING

LED sPower

Transmit

Receive

RF Signal Strength LED Indication

Relay

AUTO PAIR a new transmitter (PAIR complete Transmitter to complete Receiver)

1. Press PAIR button for >1sec then release

2. All relay LEDs Flash at a high rate

3. Press ANY button on the transmitter.

4. All LEDs will go out,

5. Wait 3 secs to confirm

NOTE: Maximum 128 Transmitters can be Paired.

MANUAL PAIR a new Transmitter (PAIR individual Relay output to individual transmitter

switch)

1. Press PAIR button for >1sec then release

2. Repeat Press the PAIR button until the chosen

Relay LED is flashing

3. Briefly Press the SPECIFIC transmitter Switch

you wish to PAIR with this Relay output.

4. PAIR LED will flash quickly for 2 seconds to con-

firm.

NOTE: Maximum of 128 SWITCHES can be paired

You cannot mix Auto PAIR and Manual PAIR!

ERASE ALL transmitters: 1. Press and hold the ERASE button for 10 seconds

2. All relay LEDs flash together and then go out

3. Erase complete

ERASE Individual Transmitters: 1. Press and release the ERASE button

2. The ERASE LED flashes and all relay LEDs will be

flashing

3. Press Switch on the transmitter to be erased

4. When all output LEDs go out transmitter is

erased

Timer (Setting a Timed Output)

1. Repeat press the TIMER Switch to scroll

through output relays until the chosen relay

LED is flashing.

2. Wait for LED to be on constantly.

3. Now Each press of the timer button will in-

crease the timer delay in line with the TIMER

OUTPUT Table (see next page).

4. When you have selected the required delay, wait

3 seconds.

5. The Red TIMER LED will Stop flashing to show

that the setting is saved

Note: Settings are saved even if power is cycled.

Note: When zero LED’s are lit the relays will oper-ate as per the Momentary/Latching links

To Erase ALL Timers: 1. Press and hold TIMER button for 10 seconds,

2. When the LED flashes fast release the timer

button the erase is complete

Mode (RF Mode of Operation) 1. Repeat press the MODE Switch to scroll

through Sig Strength LEDs until the chosen

LED/Mode of operation LED is selected. - See

Separate Table

2. Wait 3secs to confirm.

ESPRIT & ELITE Receivers

DS ELITEESPRIT-1 Page 4

TIMER (Setting an Output Time Delay)

Mode of Operation This Receiver can be configured to operate in FSK or LoRA Modes.

FSK = (FM) fixed frequency Carrier Frequency. Provides a fast Time of operation and is compatible with all other RF Solutions products at this frequency.

LoRA– Long Range Spread Spectrum .

Modes 1-7 operation where the operating Range is extended but so also is the time delay from

transmitter operation to Receiver Relay activation.

LED Mode Typical RF Transmit

8 LORA 7 1.28 Seconds

7 LORA 6 640 mSecs

6 LORA 5 320 mSecs

5 LORA 4 160 mSecs

4 LORA 3 80 mSecs

3 LORA 2 40 mSecs

2 LORA 1 20 mSecs

1* FSK 20 mSecs

To Set the Mode of operation

1. Press the MODE button momentarily the MODE

LED will flash.

2. Repeat press the MODE button until the chosen

LED / Mode is selected

LED Output Time

8 60 mins

7 30 mins

6 10 mins

5 1 mins

4 30 Secs

3 10 Secs

2 5 Secs

1 1/2 Sec

0 Momentary

*This is Factory Default

ESPRIT & ELITE Receivers

DS ELITEESPRIT-1 Page 5

Connecting an External Antenna

An External Antenna connection maybe con-

nected into the UFL connector.

A direct UFL plug in coax Cable is available to

which provides Standard SMA panel mount type

connector onto which many external antenna

can connect

Antenna : ANT-GSM5WM

• Wall mount antenna

• 3m cable

• Wall Mount Whip Antenna

• Active gain: +5dB

• RG58 Connecting Lead

• SMA Connector

CBA-UFLSMA

Push fits onto the UFL Connector and provides a

panel mount SMA connector which can be mounted

in the enclosure.

Antenna : ANT-PUKDB

• Rugged “PUCK” Screw Fix Mount

• +2dBi Gain

• Omni directional Antenna

• 1.5metres RG174 Cable

• SMA Male Connector

• M14 Screw Fix connector

UFL

Connector

ESPRIT & ELITE Receivers

DS ELITEESPRIT-1 Page 6

251.00

All Dimensions in mm

10

6.0

0

53

.00

125.50

Wall Mounting template (not to scale)

RELAY 1 RELAY 3 RELAY 4

FUSE

L N E

0Vdc

12-3

2Vac/d

c

NO COM NC NO COM NC NO COM NC NO COM NC

230V INPUT

SUPPLY

Application Drawing - Switching a Lamp

ESPRIT & ELITE Receivers

Disclaimer:

Whilst the information in this document is believed to be correct at the time of issue, RF Solutions Ltd does not accept any liability whatsoever for its accuracy, adequacy or

completeness. No express or implied warranty or representation is given relating to the information contained in this document. RF Solutions Ltd reserves the right to make

changes and improvements to the product(s) described herein without notice. Buyers and other users should determine for themselves the suitability of any such information or

products for their own particular requirements or specification(s). RF Solutions Ltd shall not be liable for any loss or damage caused as a result of user’s own determination of

how to deploy or use R F Solutions Ltd’s products. Use of RF Solutions Ltd products or components in life support and/or safety applications is not authorised except with ex-

press written approval. No licences are created, implicitly or otherwise, under any of RF Solutions Ltd’s intellectual property rights. Liability for loss or damage resulting or

caused by reliance on the information contained herein or from the use of the product (including liability resulting from

negligence or where RF Solutions Ltd was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict RF Solutions Ltd’s liability

for death or

personal injury resulting from its negligence.

RF Solutions Ltd. Recycling Notice

Meets the following EC Directives:

DO NOT

Discard with normal waste, please recycle.

ROHS Directive 2011/65/EU

Specifies certain limits for hazardous substances.

WEEE Directive 2012/19/EU

Waste electrical & electronic equipment. This product must be disposed of

through a licensed WEEE collection point. RF Solutions Ltd., fulfils its WEEE

obligations by membership of an approved compliance scheme, environment

agency registration number WEE/JB0104WV.

Waste Batteries and Accumulators

Directive 2006/66/EC

Where batteries are fitted, before recycling the

product, the batteries must be removed and

disposed of at a licensed collection point.

Environment Agency producer registration num-

ber: WEE/JB0104WV.

Important European compliance information

This RF Solutions product meets the essential requirements of the European Radio Equipment Directive

2014/53/EU and has been tested to European Harmonised Standards and CE marked accordingly. A copy of the

EU Declaration of Conformity can be located on the RF Solutions Website, www.rfsolutions.co.uk/certification-

Technical specifications

Enclosure Rating: IP68

Dimensions: 267 x 148 x 78mm (not including antenna)

Operating Temperature: -10 to +60o Celsius.

*The relay contacts in this unit are for functional use only and must not be used for isolation purposes

Electrical Characteristics MIN TYPICAL MAX DIMENSION

Supply Voltage 6 32 Vdc or ac

Operating Frequency

868MHz Version

918MHz Version

869.5

918.0

MHz

Supply Voltage for ac

ESPRIT

ELITE

110

230

Vac

Relay Rating* (230Vac) 5 12 A

Supply Current at Vsupply

Quiescent

All relays operating*

17

175

mA

Time from Tx on Switch to Rx Relay operation (FM) 30 mS

Time from Tx sw relax to Rx Relay release 30 mS

http://www.rfsolutions.co.uk/certification-i59