Elegance

Sapa Building System

Curtain Walling

3

Elegance 52 is a comprehensive curtain wall system that com­bines technology and design with the demands of contemporary building design and construction. All Elegance 52 systems use a common substructure with a width of 52 mm, allowing a slim sightline, whilst maintaining the necessary strength and inertia requirements for most applications.

Weather performance, thermal insulation, building

connection, ease of fabrication and installation

were the key factors that influenced the design of

Elegance 52.

Extensive range of solutions

AllElegance52applicationsaremadeupfromaset

ofdurablemullionsandtransomswithaprofilewidth

of52mm.Alargerangeofprofiledepthsisavailable

to suit the structural requirements and to give the

mosteconomicalsolution.

» Elegance52 is available in different versions, each

providinguniquedesignfeatures:

-Elegance52ST(standard)

-Elegance52HL(horizontallining)

-Elegance52IT(“italian”window)

-Elegance52SI(superinsulated)

-Elegance52IN(industriallook)

-Elegance52FR(fireresistant)

-Elegance52Burglaryresistant(class2)

-Elegance52SX(structurallyclamped)

-Elegance52SXIT(“italian”window)

-Elegance52SG(structuralglazing)

-Elegance52GF(glazedframe)

-Elegance52Eco

-Elegance52EcoIT

-EleganceSC(SolarControl)

-BuildingIntergratedPhotovoltaic

» Elegance 52 can be used in vertical, sloped or

roof applications, it offers several solutions for

connections to other levels of curtain walling and

buildingmaterials,whilstalwaysaffordingmaximum

weatherperformanceandminimalsightlines.

» Elegance52systemprovidesintegrationwithexisting

window and door systems of the Sapa Building

Systemproductrange.

Fabrication and Installation

» Drainage can be both field / compartmental or

mulliondrained.

» Specially developedaluminiumor steel profiles can

beinsertedinthemullionstoassureahigherinertia

forextremelylargespansandtoprovideacontinuous

mullionconnectionandanchorage.

» SystemofdryglazingbymeansofEPDMgaskets.

» All window and door systems of the Sapa Building

Systemproduct rangehaveaccessoriesspecifically

designedtoalloweasyintegrationinthecurtainwall.

» Dependingonthetypeofapplicationthesystemcan

be mullion-mullion or mullion-transom connected.

Front mounting of transoms is made possible by

spring cleats. A notched mullion solution has been

developedforsituationswhenextrasupport for the

transomsisrequired.

» PunchtoolsspecificallydesignedfortheElegance52

ensureaccurateandfastprefabricationofdrainage

holesandtransomcutouts.

» Drillingjigseasethepositioningoffixingpieceswhen

prefabricatingthesystem.

4

Elegance 52 ST is an externally capped thermally

broken curtain wall system that offers many design

options by the use of different designer mullions

and cover caps. Elegance 52 ST offers solutions for

vertical, slope and roof applications and can solve

facetted curtain wall requests.

System features

» Elegance52STcanacceptglassandpaneldepths

of4to50mm.

» Thesystemcanbeself-supportingorcanbeusedin

combinationwithasupportingstructure.

» ST is able to accept tolerances and movements

causedbythermalexpansion,withoutcompromising

theweatherperformance.

» Weather resistance: AE 750 (EN 12152); RE 750

(EN12154);3000Pa(EN13116)

Elegance 52 ST

Dimensions

Sightline 52mm

Mulliondepth 41-273mm

inertia(Ixx:wind) 9,57-1649,7cm4

Transomdepth 22,5-199mm

inertia(Ixx:wind) 3,67-515,84cm4

inertia(Iyy:glass) 1,09-53,03cm4

Glazing

Infillthickness 4-50mm

Glazingmethod dryglazedwithEPDMgaskets

Performance

Thermalbreak 4-36mm

Thermalinsulation Ucw<1,4W/m2KwithglassUg=1,1W/m2K

ENISO10077-2

Airpermeability AE750 EN12152

Watertightness RE750 EN12154

Windresistance 3000Pa EN13116

Acoustics:

withglass6/15/4 Rw(C;Ctr)=34(0;-2)dB

withglass10/15/6 Rw(C;Ctr)=36(-1;-2)dB

withglass12/16/44.2 Rw(C;Ctr)=42(-2;-5)dB

Impacttest class5 EN14019

This information is only an indication. For more information, please consult your local Sapa Building System branch.

5

4-24 mm

8-38 mm

20-50 mm

52 m

m

Elegance 52 SGTH

Elegance 52 SG

52 mm

35 mm 15 mm

Design

» A wide range of decorative cover caps (bull nose,

rectangular, aerofoil, etc) gives the freedom to

designvisuallyinterestingglazing.

» By combining different cover caps for horizontal

and vertical applications, a wide range of external

featuresispossible.

» Several designer mullions are available for internal

designfeatures.

» Mullionsandtransomscanbeflushattheinsideor

canbespecificallydifferenttoemphasisthevertical

designcomplementingthetotalbuildingdesign.

» Severalspeciallocationssuchas90°anglemullions

orvariableangleshavebeendesignedwithaminimal

useofmaterialallowingslimsightlines.

» Byusingthevariousdesignermullions/ transoms,

incombinationwiththeextensivecolourrange,the

differentoptionsarepracticallyunlimited.

6

4-24 mm

8-38 mm

20-50 mm

52 m

m

Elegance 52 SGTH

Elegance 52 SG

52 mm

35 mm 15 mm

Elegance 52 HLElegance52HLisaspecificsolutionwhenhorizontal

liningisrequired.ThesystemisbasedontheElegance

52 ST basic structure and creates a horizontally

continuouseffect by changing the vertical cover caps

for a hidden profile sealed by a gasket. The hidden

profilestillallowsthetightsealingoftheglassagainst

the structure, the gasket masks the vertical detail

puttingmoreemphasisonthehorizontalcovercap.The

horizontalcovercapscanbechosenoutofawiderange

ofprofilestointegratewiththetotalbuildingdesign.

7

8

9

Elegance 52 IN

4-24 mm

8-38 mm

20-50 mm

52 m

m

Elegance 52 SGTH

Elegance 52 SG

52 mm

35 mm 15 mm

Elegance52INisbasedonthesameElegance52ST

principlesofdrainage,coupling,fabricationandthermal

insulation but uses a special range of mullions and

transoms to create a slim interior design effect. The

resultinganchoringandmovementsolutionshavebeen

included.

Where the Elegance 52 ST uses tubular profiles, the

Elegance52profileshavean IorTshape.Externally,

thesystemacceptsthewiderangeofpressureplates

and cover caps which are used in the standard stick

system.

Variousdesignsandcombintionsofmullionsandtransomsarepossible

10

Elegance 52 FR

4-24 mm

8-38 mm

20-50 mm

52 m

m

Elegance 52 SGTH

Elegance 52 SG

52 mm

35 mm 15 mm

Elegance 52 FR has been designed to meet the

demand for the protection of people and their

possessions in and around buildings. There is an

increasing need to create compartments which

prevent fire and smoke spread around the building,

from one floor-level to another and between adjacent

buildings. It is clear that the adaptations to create

fire resistance within a curtain wall will increase both

the value and safety of the project.

In order to retain a uniform aesthetic treatment,

Elegance52FRisbasedonthesuccessfulElegance

52 ST concept and uses complementary profiles and

accessoriesinsidethesystemtomakeitfireresistant.

Therefore, Elegance 52 ST and the fire resistant

Elegance52FRversionarevisuallyindistinguishable.A

combinationofcomplementaryintumescentstrips,steel

pressure plates, cooling materials and fire resistant

glazingensurestheEI30classification.Both integrity

andinsulationareprovidedbythesystem.Asaresult,

notonlythefireitself,butalsotheheatiskeptoutside

foratleast30minutes.

Elegance52FRwastestedofficiallytoEN1364-3,EN

1363-1andEN1363-2forbothinternalandexternal

fire-exposure.

11

4-24 mm

8-38 mm

20-50 mm

52 m

m

Elegance 52 SGTH

Elegance 52 SG

52 mm

35 mm 15 mm

TheElegance52burglaryresistant(classWK2)offers

an efficient protection against break-in. The special

fasteningspreventunauthorizedremovaloftheglazing.

Theexternalandinternaldesignisnotimpaired.Andthe

creativefreedomismaintainedthroughcustomshapes

and colour options. Two basic external appearance

optionsareavailable:Elegance52ST(bothhorizontal

andverticalexternalcovercapsareused)andElegance

52 HL (only horizontal cover caps are used giving a

morevisiblehorizontalliningeffect).

Theburglaryresistantwallscanbenaturallycombined

withstandardnon-protectiveversion(i.e.WK2protection

ongroundfloor,standardcurtainwallonhigherlevels).

TheElegance52burglar resistantcurtainwallmeans

acomprehensivelytestedsecurityperformance(tested

according to test standards ENV 1627, 1628, 1629

and1630).

Elegance 52 burglary resistant (class 2)

12

ThemainprofileprincipleofElegance52systemsgives

a great opportunity to build a variety forms of sloped

glass construction. The special effective, multilevel,

internal drainage system, with two-stage pressure

equalising seal gives a perfect tightness against

water penetration. The outer seal is water-repellent,

the ventilation and draining channels ensure pressure

equalisingfunctionandtheinnersealisairandvapour

tight. The inner seal takesup thepressuredifference

between the outside and the inside. External glazing

beads are very low profiled and equipped with water

culvert to allowefficient flowofwater and snowover

externalsurfaces.

Asregardsthestaticloads,glazedroofscanhavelarge

spans due to an assortment of mullion profiles with

very high stiffness and advanced anchoring solutions.

The complicated 3D forms can be constructed using

bespokebracketingwithadjustableangles.Thesloped

roofs can be naturally combined with vertical curtain

wallsandglazedfacadeswiththeuseof incorporated

gutterprofiles.

Optional openable rooflights provide effective natural

smokeandheatventilation(certifiedmotorizedconcept

tested and certified according to EN 12101-2:2003

standard).

Elegance 52 roof applications

1313

14

15

4-24 mm

8-38 mm

20-50 mm

52 m

m

Elegance 52 SGTH

Elegance 52 SG

52 mm

35 mm 15 mm

The Elegance 52 SI (Super Insulation) meets the

higheststandardsinthermalinsulationusinginnovative

insulation technology. This highly thermally insulated

facadesystemensurescompliancewithenergy-saving

standardsandinitiatives.

» Modularsystemwithdifferentinsulators.

» Enhanced thermalperformancebyaddingonlyone

component.

» Highlevelofacousticinsulation.

» The high thermal performance level improves the

overall building insulation, leading to a lower total

energy consumption and improving the building’s

environmentalprofile.

Elegance 52 SI

Ucw = 0,88 W/m2K

(withUg=0,7W/m2K,elementsize1400x1600mm)

16

4-24 mm

8-38 mm

20-50 mm

52 m

m

Elegance 52 SGTH

Elegance 52 SG

52 mm

35 mm 15 mm

Elegance52ITisanoutwardopeningwindow-system,

specificallydesignedtoallowaventwithaminimalvisual

aspect tobe integrated into theElegance52STand

Elegance52HL.Theventscanbarelybedistinguished

fromthefixedpanels.

System features

» TheElegance52ITItalianisavailableintop-hungor

side-hungapplications.

» The glass is structurally bonded to the vent frame.

Glassof20to30mmcanbeused.

» Glassretainerclipsensuretotalsafety.

» Drainageiscompartmentalorfield-drained.

» Several gaskets ensure a perfect weather and

acousticperformance.

» Maximumheightoftheventis2000mm.

Alternative

» ItispossibletointegrateanySapastandardwindow

anddoorsystemsintheElegance52STandHLby

usingspecialframeprofilesoraccessories.

Elegance 52 IT

17

18

Elegance 52 SGElegance 52 SG is a structurally glazed curtain wall

system using the basic substructure of Elegance

52 and offering a solution for combinations of

fixed or opening panels in both straight or facetted

applications. The structurally glazed curtain wall

offers a minimal sightline without having a visual

difference between fixed and opening panels.

System features

» The use of a structurally glazed curtain wall avoids

theuseofcovercapsresultinginaflushsurfacewith

minimalsightlines.

» The Elegance 52 SG can accept glazing of 24 to

28mm.

» The maximum dimension of a panel is 1500 x

870mm(heightxwidth).

» The SG includes an integrated outward opening

windowsystemthatdoesnotshowavisualdifference

withtheidenticalfixedpanels.

» In addition to glass panels, it is also possible to

accomodateothertypesofpanels.

» ArangeofgasketsinEPDMoffermaximumweather

andacousticperformance.

» Safetyclipsensuretotalsecurity.

» Thewiderangeofmullionprofilesoffersananswer

tobothinertiaanddesignrequirements.Mullionand

transom profiles can be flush or stepped on the

inside.

Fabrication

» Transomtomullionconnectionscanbestraightcut;a

notchedmullionversionisavailablewhenthetransom

requiresextrasupport.System-designedconnectors

makeaneasyinstallation.

» The glass is structurally bonded to an anodised

profileinthevent,bondingoftheglasstotheprofile

iscarriedoutbyspecialised,certifiedcompanies.

» Vent profiles are assembled using crimped or

eccentriccleats.

» After assembly of the basic mullion structure, the

differentpanelsarepositionedandtightenedbyuse

ofconnectorsonallsides.Itispossibletodismantle

thepanelsifreplacementisnecessary.

Dimensions

Sightlineinside 52mm

Sightlineoutside 19mm

Mulliondepth 41-273mm

inertia(Ixx:wind) 9,57-923,84cm4

Transomdepth 36-167mm

inertia(Ixx:wind) 4,15-308,02cm4

inertia(Iyy:glass) 7,29-43,74cm4

Glazing

Infillthickness 24-28mm

Glazingmethod structuralglazing

Performances

Thermalbreak 14,8mm

Airpermeability 600Pa XPP28-004

Watertightness 600Pa XPP28-004

Windresistance 1200Pa XPP28-004

This information is an indication. For more information, please consult your local Sapa Building System branch.

19

4-24 mm

8-38 mm

20-50 mm

52 m

m

Elegance 52 SGTH

Elegance 52 SG

52 mm

35 mm 15 mm

20

21

4-24 mm

8-38 mm

20-50 mm

52 m

m

Elegance 52 SGTH

Elegance 52 SG

52 mm

35 mm 15 mm

4-24 mm

8-38 mm

20-50 mm

52 m

m

Elegance 52 SGTH

Elegance 52 SG

52 mm

35 mm 15 mm

Elegance 52 SX

Elegance 52 SX IT

Elegance 52 SX is a structurally clamped aluminium

curtainwallsystemwheretheglassisretaineddirectly

towardsthestandardstructureofElegance52STwith

the use of concealed pressure plates. The retained

intercalary profile between the double glazed panes

providestheareatoinsertthepressureplateswhichare

directly screwed in the central groove of the mullions

andtransoms.

This solution provides an economic alternative to

traditionalstructuralglazedcurtainwalls.

Elegance52SXisanalternativetotraditionalstructural

glazed systems as it also creates a flush surface

appearance.

EleganceSXITisanopeningwindowdevelopedforuse

within curtain wall facades whereby the opening light

frame is not visible externally. Elegance SX IT allows

theexternalglasssurfacetobepositionedpreciselyin

linewith that of theadjacent fixed curtainwall areas,

whencombinedwiththeabsenceofanexternalframe

this means that the opening windows are virtually

indistiguishablewithintheoverallfacadegrid.

Our range of hardware allows top hung open out

windowstobemanufacturedupto2.0minheightand

130Kginweight,andforstorey-heightparallelopening

windows,operatedeitherwithmanualhandlesactuating

concealedmulti-pointlockingsystems,orwithmotorised

systems. Motorised actuation is recommended for

parallelwindowsinexcessof60kg.

22

Elegance 52 SG Eco

Elegance 52 SG Eco IT

4-24 mm

8-38 mm

20-50 mm

52 m

m

Elegance 52 SGTH

Elegance 52 SG

52 mm

35 mm 15 mm

4-24 mm

8-38 mm

20-50 mm

52 m

m

Elegance 52 SGTH

Elegance 52 SG

52 mm

35 mm 15 mm

Elegance52ECOisastructurallyclampedaluminium

curtainwallsystemwheretheglassisretaineddirectly

towards the standard structure of Elegance 52 ST

without the use of pressure plates nor cover caps. A

special groove in the intercalary profile between the

doubleglazedpanes, provides thepossibility to insert

connection pieces which are directly screwed in the

centralgrooveofthemullionsandtransoms.

Thissolutionisanalternativeforthetraditionalstructural

glazed systems as it also creates a flush surface

aspect.

The Eco IT version is an aluminium outward opening

window system, designed to allow a hidden outward

openingventtobeintegratedintheElegance52ECO.

Theglassisstructurallygluedtothevent.Athermaland

non-thermally insulatedversionareavailable.Thereis

hardlyadifferencebetweenopeningandfixedpanels.

Maxglazingthickness:28mm

Maxheightvent2000mm

23

24

25

4-24 mm

8-38 mm

20-50 mm

52 m

m

Elegance 52 SGTH

Elegance 52 SG

52 mm

35 mm 15 mm

Elegance 52 GF

Performances

Airpermeability A2 EN12152

Watertightness R5 EN12154

Windresistance 800Pa EN13116

This information is only an indication. For more information, please consult your local Sapa Building System branch.

Elegance 52 GF is a curtain wall system based on

the structure of the Elegance 52 SG using a glazing

bead instead of structurally bonding the glass to the

panel. Our design team developed this solution to

offer a version where the glass is held in position

with aluminium as in a picture frame. This approach

offers each panel to be independent but still be

integrated in the full curtain wall.

System features

» Solutions forbothfixedpanelsasoutwardopening

panelsareavailable.

» Twodesignsofglazingbeadsareavailable.

» Glazingof20to30mm.

» Maxpanelsizeof1500x900mm(heightxwidth).

» The panels are thermally broken, so improving the

totalenergyperformanceofthebuilding.

» Panelsarecompletelyassembledintheworkshopand

positionedontothelocatinglugsonthestructure.

26

27

The Solar control range has been developed to

complimentElegance52curtainwallingandmeetthe

ever increasing energy demands put on the building

facade.

Sapa’s in-house technical support can provide you

with critical, specialist advice concerning the correct

applicationofproductsacrossavarietyofprojecttypes

includingmaintenanceandsafety.

Eco Clip system

hasbeendevelopedtoprovidemaximumshadingtoa

facade,bothintermsofareacoverageandconfiguration

options,whilstusingsimpleprofilesthatarelightweight

andinherentlyeconomic.

Aero Clip system

hasbeendeveloped toprovidesuitedsolutions forall

applicationswithanemphasisoneyecatchingdesign.

Side-arm system

isarangeofbladeprofilesthatcanbeusedtocreate

anyshadingconfiguration.

Elegance 52 Solar Control

28

AspartoftheOrklagroup,SapaBuildingSystemhas

all thestepsalong thevaluechainof thephotovoltaic

industryinitsownhands.Fromsilicium,throughcelland

modulemanufacturing,SapaBuildingSystemprovides

the complete photovoltaic system for the building

envelope.

Thisincludes:

» projectconsulting

» engineeringanddesign

» completePVandaluminiumproductrange

» fabricationandinstallationnetwork

» aftersalesservices

Our global presence together with our local network

ensure efficient project management close to our

customers,inallgeographicalareas.

Moreover, Sapa is able to implement these Building

IntegratedPhotovoltaics inmostof itsmarket leading

productgroupssuchassolarshading,curtainwalling,

glazedroofs,conservatoriesandwindows.

What are Building Integrated Photovoltaics?

WhilestandardPVsolutionsareoftenusedinresidential

orsolar-farmapplications,BIPVprovides thearchitect

with completely new possibilities to incorporate solar

technologyintobuildings.PVsystemsandarchitecture

cannowbecombinedintooneharmoniousmixtureof

design,ecologyandeconomy.

Our building integrated photovoltaic modules create

a world of possibilities. The wide variety of elegant

forms,coloursandopticalstructuresofcells,glassand

profiles enables creativity and a modern approach to

architectural design. It allows specifiers to deliver an

energy-efficient,innovativeandprestigiousprojectand

to set new architectural standards for the future by

combiningelegancewithfunctionality.PVmodulescan

be incorporated into thebuildingvertically,horizontally

oratanangle.

The modules can be tailor-made in accordance with

dimensionsand customerwishes.A selectionof cells

and positioning can be adapted according to project

design specifics: Transparancy, Light control, Module

design,Shading,Dimension.

Building Integrated Photovoltaics

dimensions efficiency Wpeak/m2 Wpeak/cell

156x156 16% 120 1.46-3.85 125x125 Polycrystalline

156x156 18% 130 2.60-4.02 125x125 Monocrystalline

125x125 22% 155 2.90-3.11

Monocrystalline - High efficient

125x125 17% 105 1.90-2.20

Monocrystalline - semitransparent

576x976 5% 50 32

aSi (Amorphous Silicone) Thin film

576x976 4% 40-45 27

aSi Thin film 10% or 20% opacity

PV cell types and their efficiency

29

A turn key solution for your entire project

Supported by Sapa Building System’s extensive ex-

pertiseandknow-how,weprovideacompletepackage

with a wide range of services: we investigate which

subsidyregulationsapplytotheprojectandensurethat

nationalbuildingregulationsaremetineverydetail.Sapa

BuildingSystemsupportswithdesignandengineering

forutilityconnections,cablingplans,electronic,staticand

thermalcalculations.For the installation,ourextensive

networkofexperiencedinstallersandbuildersprovides

full assistance. For the delivery of BIPV components

we cooperate with prominent partners in the building

industry.

At Sapa Solar, we drive the entire design process by

usingourtechnicalexpertiseandexperience:fromthe

very first dialogue with the client, through conceptual

drawings,thedevelopmentofhighqualityphotovoltaic

systemsthatareeasytomanufacturetoinstall.

Support offer

» Engineering study, curtain walling structure, static

calculation,design,drawings

» Photovoltaic study, module proposal, output

calculation,electricaldata,investmentcalculation

» Project budget envelope, timetable estimation,

qualifiedinstallerrecommendation

BIPV project installation

» Supply of all hardware, profiles, modules and

electrics

» Engineering, installation support, site management,

administrativeassistance

» Qualified installer network combining expertise in

facadeandelectronics

aSiThinFilm Polycrystalline Monocrystalline aSiThinFilm Monocrystalline Monocrystalline Polycrystalline HighEfficient Semitransparent HighEfficient 10% 20% transparency 5mmdistance 3mmdistance transparency 5mmdistance 25mmdistance 50mmdistance

180 45%

160 40%

140 35%

120 30%

100 25%

80 20%

60 15%

40 10%

20 5%

0 0%

PowerW/m2 Transparency

Possible combinations cell-type and cell distances

30

Elegance 72Elegance 72 is a unitised curtain walling system that

bringstogetherthebenefitsoffactoryproductioncontrol

and speed of installation on site. Modular units are

manufacturedcompletewithglazingunitsinworkshop

conditions,wherequalitycanbestrictlycontrolled.The

fixinglugsarebuiltintotheperimeter,ensuringeaseof

handlingduringtransportationandarrivalonsite.

Fitting the modular panels into place takes far less

time than constructing a traditional stick-build system

and,forinstallationswherescaffoldingisunavailableor

impractical,cranescanbeusedtohoistthepanelsinto

positionquickly,efficientlyandaboveallsafely

Elegance 72 can incorporate windows and doors

from the Sapa Building System range, as well as

Elegance52,EleganceSolarControlandsolarpower

generationthroughourBuildingIntegratedPhotovoltaic

system, thus providing a complete facade solution for

anybuildingtypeorstyle.

Thesystemisavailableinstructurallyglazedaluminium

and structurally clamped aluminium. Horizontal or

verticalliningarealsopartoftheoffer.

31

Production

» Modular units are manufactured including glazing

unitsinthefactory.Thisensuresanoptimized:

-Productionprocess

-Laborcost

-Maximalcontrolonquality

-Noinfluenceoftheweather.

» Fastglazingwithoutscrewingbyusingthedifferent

externalglazingbeads.

Installation

» Framesarefittedonefloorlevelatatime.

» The units are craned or winched into position and

secured from the inside of the building, reducing

costsandencouragingsaferworkingconditions.

» Dry connections between movement gaskets for

watertightnessupto1500Pa.

» Thestorageofcladdingmaterialsandglasshandling

on site can be completely eliminated - a major

advantageforconstrainedcitycentresites.

» Significantly improved quality and performance

becausethefacadepanelsarecompletedoff-sitein

acontrolledfactoryenvironment.

Cost Effective

» There are cost savings on site preliminaries and

scaffolding.

» Theoptionofstandardisationforeconomiesofscale

andmaterialoptimisation.

» Fasterprogrammetimesleadingtoearlieroccupation

andafasterreturnoninvestmentforthedeveloper.

» Constructionislessaffectedbyinclementweather.

» More efficient control of materials, including less

wastage,lossanddamage.

» The facade panels are manufactured off-site and

craned into position, making this a highly efficient

solutionwheresiteaccessisrestricted.

PBEL

52-E

N»0

3-20

11

Sapa Building System,isoneofthelargestsuppliersofaluminiumbuildingsystemsinEuropeandispartoftheSwedishgroupSapa,theworld’slargestdeveloperproduceranddistributorofextrudedaluminiumprofilesystems.SapaBuildingSystemaimsforwell-developedsystemsandprojectsolutionsofferingatangibleaddedvaluetofabricators,architects,investorsandhome-owners.

Windows and Doors

Sliding Systems

Curtain Walls

Conservatories

Balustrades, gates and others

BIPV

YourlocalSapaBuildingSystemfabricator

Sapa Building System NVPostaladdress Industrielaan 17, BE-8810 Lichtervelde Tel. +32 51 72 96 66 Fax +32 51 72 96 89Postaladdress Industriezone Roosveld 11, BE-3400 Landen Tel. +32 11 69 03 11 Fax +32 11 83 20 04E-mail buildingsystem.be@sapagroup.com Website www.sapabuildingsystem.be