ELEDD

MACKWELL EMERGENCY LED DRIVER

ELEDD - REF: 8214V209/13

LIGHT THE WAY LIGHT THE WAY

LIGHT THE WAY LIGHT THE WAY LIGHT THE WAY

E M E R G E N C Y L I G H T I N G E M E R G E N C Y L I G H T I N G E M E R G E N C Y L I G H T I N G




POWERED BY:

PAGE 2

SWITCHED 240V POWER

UNSWITCHED 240V POWER

BESPOKE ‘BRAND SPECIFIC’ LOOMS

MAINS DRIVER

LIGHT ENGINES

ELEDD ADJUSTABLE VOLTAGE DRIVER ELEDD BATTERY PACK

www.mackwell.com




Introducing...ELEDD, a simple solution to using LED light engines for emergency purposes.

Mackwell Electronics is the global leader in emergency lighting solutions. Our 30 years experience plus extensive research and development has resulted in the unique and revolutionary ELEDD emergency driver, which guarantees that your LED fittings will conform to all relevant emergency lighting legislation.

The ELEDD combines the latest energy efficient technology with versatility, ease of fitting, simple operation and a modern aesthetic design.

PAGE 4

DEPENDABILITY

Mackwell’s 30 years’ experience and reputation for quality in emergency lighting conversion underpin the design and construction of the ELEDD. So reliability and long service life are a given. And to back that up, every module carries a three-year guarantee.

VERSATILITY

User accessible output selection allows a more precise match to the host LED scheme and for the customers this means a smaller stock range and reduced cost.

EASE OF FITTING

The articulated design enables easy installation through small cut-outs. A wide range of available accessories makes for easy connection into existing, installed wiring looms.

www.mackwell.com




COMPATIBILITY

Easily compatible with many available light engines from such manufacturers as GE, Philips and Osram.

EFFICIENCY

Available in low, medium and high voltage output models, each with selectable output enabling the most effective match to your requirements. All models feature Mackwell’s Smartcharge circuitry for lower operating temperatures and extended cell life.

FUTURE PROOFING

Operational versatility combined with a wide range of accessories enables the ELEDD system to keep pace with progress in LED design.

PAGE 6

Future ProofingThe ELEDD system has built-in adaptability which allows it to keep pace in the rapidly advancing world of LED lighting technology.

SELECTABLE OUTPUT

The ELEDD system allows the lighting OEM to select the optimum current output based on the forward voltage of the LED to maximise the emergency lumen factor for their specific light engine.

LOOM CONVERTER

The ELEDD loom converter simplifies connection to non-standard LED wiring looms. Client specific wiring looms are available upon request.

BESPOKE LOOMS

We can provide bespoke wire looms for most major lighting manufacturers. Our sales team can work alongside buyers, specifiers and their technical staff to achieve the most cost effective and efficient solution to any Emergency LED requirement, whether existing or projected.

CONVERSION KITS

www.mackwell.com




SafetyAs a member of AG-DALI working group, mackwell has established itself within the DALI community as a World Leader in DALI emergency lighting products.

The ELEDD is available with the option of DALI functionality and when installed in a system which does not include DALI the module will automatically default to standalone Mackwell AutoTest ®.

The ELEDD is compatible with the N-light DALI emergency system from mackwell.

PAGE 8

CompatibilityThe ELEDD system has been extensively tested and proven with the market leaders in LED engines (including Philips, Osram and Xicato)

The versatility and adaptability of the ELEDD system makes it suitable for use with most LED products.

The concept of the design is to facilitate the easy conversion of mains powered LED’s to work in emergency.

ELEDD has been tested with the most popular LED products available on the market and is adaptable to work with customers bespoke LED offerings.

www.mackwell.com




OptimisationThis graph illustrates how the unique user-selectable switch settings correspond to the lamphead current across the voltage range.

The settings can be changed to optimise the performance of the LED in emergency.

As LED’s become more efficient the user can switch the settings to accommodate improved lamphead technology.

PAGE 10

Options...

OPTION 1 - ELEDD MODULE & BATTERYMackwell can supply the module and battery combination for an OEM manufacturer to complete the conversion within their own luminaire assembly.

The module is housed in a PC/ABS flame resistant can, with terminal blocks accessible at either end.

Please note a Mackwell battery must be purchased with the driver.

OPTION 2 - ARTICULATED UNITThe articulated design made of flame retardant PC/ABS; which includes module and battery, has been a standard product offering from Mackwell for many years. We have expanded this design to the new ELEDD range.

The articulated unit allows the driver and battery to be easily placed through a small ceiling aperture with limited space.

The design can be used as a conversion kit or as a standalone unit to drive a high power lamphead in an emergency.

OPTION 3 - MULTI BOXOur experience in emergency lighting conversion has made us aware of the challenges experienced when connecting an emergency driver at site.

The ELEDD Multibox is the solution. Manufactured from durable flame-retardant PC/ABS plastic, the multi box contains an easily accessible battery and terminal blocks.

The multi box has a cross section profile of just 86mm and this allows it to be easily installed through most lamphead apertures.

www.mackwell.com




Accessories...

LED INDICATORS

Mackwell offer LEDs in a wide variety of formats to help you obtain precisely the best LED for your luminaire.

WIRING LOOMS

To make conversion of mainstream LED products easier, we can supply standard wiring looms with your order.

SIDE FIXING CLIPS

The side fixing clips, which are easily attached to both ends of the module, allow the ELEDD to be side mounted and secured to luminaire assembly.

PAGE 12

Specifications...

PRODUCT NAME TYPE OF LAMPHEAD

BATTERY NOMINAL FORWARD VOLTAGE SETTINGV(f) mA

ELEDD4 Single LED Lamphead 4 cell 4Ah NiMH 2.7-4V 1000

2.7-4V 700

2.7-4V 550

2.7-4V 275

ELEDD12 Multi LED Lamphead 4 cell 4Ah NiMH 6V 500

6V-12V 300

ELEDD30 Multi LED Lamphead 4 cell 4Ah NiMH 6V-12V 225

12V-18V 190

18V-24V 140

24V-30V 110

ELEDD55 Multi LED Lamphead 4 cell 4Ah NiMH 30V-36V 90

36V-42V 80

42V-48V 70

48V-55V 60

OPERATION (NON-AUTOTEST VARIANTS ONLY)

Connection of the unswitched supply will start the battery charging. The battery and mains supply should be left uninterrupted for 24 hours to ensure that the battery is fully charged and capable of providing 3 hours emergency duration. The LED indicator will be permanently illuminated, showing that the battery is being charged. If the LED indicator is not illuminated, check battery connections.

DALI, D1 VARIANTS ONLY

These modules carry out automatic commissioning upon installation and provide automated self-testing in addition to DALI communication. This allows two-wire communication between the luminaire and a central monitoring or control system designed to meet the requirements of DALI standard EN 62386. For a full explanation please refer to “Mackwell Emergency Modules with DALI Interface - Description and Operating Notes” mackwell document number 39795.

RELEVANT STANDARDSEN 62386 DALI

EN 61347-2-7, 2-13

Lamp Control Gear

EN 62384 LED Control Gear

EN 60598-2-22 Luminaires

ICEL 1004 Conversion to Emergency

BS 5266-1 Emergency Lighting

EN 62034 Automatic Test Systems

www.mackwell.com




SHARED TECHNICAL DATASupply Voltage 230 VAC ± 10% 50/60 Hz

Supply Current (max) 45mA

Battery Charge Current 200mA

LED Current (Iout) 60-1000mA selectable (see above)

LED Rating (Vf) 2.7V-55V selectable (see above)

Ambient Temperature 0-45°C (Module) 10-35°C (Battery)

Max Case Temp (Tc) 70°C (Module)

Conductor Size 0.2 – 1.5mm2

Total Circuit Power (max) 4.0W

TEST SWITCH

Emergency operation of the module can be tested by pressing and holding a low voltage test switch if fitted. The switch should be a momentary push-button with N/O contacts minimum rating 10 VDC, 30mA.

AUDIBLE ALARM

On AutoTest modules only an audible alarm will sound if a fault is found during test and will continue to give 3 beeps every 35 minutes until the fault is rectified and the unit is reset. Once a DALI variant has received a valid DALI command, the sounder will be disabled.

LED INDICATOR

A range of indicator LEDs are available in diffused or clear high intensity, with or without a fitted rubber bezel or plastic clip and with various lead lengths. DALI variants should be used with a bi-colour LED. Non-AutoTest variants can be used with single or bi-colour LEDs but will only illuminate with one colour.

PAGE 14

199

57.

05

80.76

41.03

21.

00

25.

50

472.00

41.

50

21.

00

44.

00

41.

50

241.00

21.

00

25.

50

472.00

41.

50

21.

00

44.

00

41.

50

241.00

DimensionsOption 1. Module only

199.00

16.

00

21.

00

41.

50

42.

50

230.00 220.00

Option 3. Multi box

Option 2. Hinged assembly

www.mackwell.com




Option 1. MODULE ONLYModule Name Optional DALI FunctionalityELEDD4 /D1

ELEDD12 /D1

ELEDD30 /D1

ELEDD55 /D1

BATTERY ONLYBattery CodeB904 - 2+2 Cell NiMH 4Ah Twin Stick

B914 - 4 Cell NiMH 4Ah Side-by-Side

Option 2. HINGED ASSEMBLY WITH MODULE & BATTERY (H for Hinge)

Module Name Optional DALI Functionality

Type

ELEDD4 /D1 /H

ELEDD12 /D1 /H

ELEDD30 /D1 /H

ELEDD55 /D1 /H

Option 3. MULTI BOX (R for Remote)

Module Name Optional DALI Functionality

Type

ELEDD4 /D1 /R

ELEDD12 /D1 /R

ELEDD30 /D1 /R

ELEDD55 /D1 /R

ELEDD30/D1/H

ELEDD=PRODUCT FAMILY

4/12/30/55 RELATE TO MAX OUTPUT VOLTAGE

LEAVE BLANK FOR STANDARD, ADD D1 FOR DALI

TYPE: H = HINGED, R = REMOTE BOX, ADD BATTERY CODE IF MODULE ONLY

EXAMPLE OF PART NUMBERING:

BI-COLOUR LED INDICATORWith Bezel, 8mm

Lead Length Diffuse Clear

500 LBD500B LBC500B

Without Bezel

Lead Length Diffuse Clear

500 LBD500 LBC500

Optional black plastic for non-bezel LED’s; 6.5mm mounting hole.

Part no 18732

WIRING LOOMProduct Name Notes

ELD-WL01 Philips DLM and SLM

ELD-WL02 Osram PrevaLED

SIDE FIXING CLIP (PAIR)Product Name

ELEDD SC

TEST SWITCHProduct Name Notes

ELD-SW01 500mm wire length

Ordering Optional Accessories

tel. +44 (0) 1922 458 255 email. [email protected] www.mackwell.comVigo Place, Aldridge, West Midlands, WS9 8UG, England




Documents

ELEDD