OVERVIEW| bakerhughes.com

Applications

Offshore platforms

Motor Control Centers (MCC)

Arctic houses

Any indoor application

Features and benefi ts

MaxStart™ software for hard-start

applications

– Delivers best-in-class starting

characteristics in harsh environments

MaxPoint™ software for frequency

sweep capabilities

– Maximizes production by ensuring

minimal shock to the reservoir during

startup and rate-change events

Optimized power converter (standard)

– Ensures low impact on input power

system required by power companies

Plug-and-play capability for sensors

– User-friendly system provides automated

format/visibility of information

• Optimizes ESP performance

• Maximizes production

GCS with enhanced outdoor

visibility screen

– Provides easy access and control of

information during setup and operation

– Includes event and trending capabilities

NEMA 1 and IP30 enclosure

– Delivers IP30 safety and protection

(greater safety than IP2x) with improved

cooling for indoor applications

Motor torque control

– Increases ESP system run life by

preventing over-torque conditions on

the downhole equipment

Since 1986, the Baker Hughes Electrospeed™

variable speed drive (VSD) has consistently

set new performance standards. Innovations

incorporated into the fi fth-generation

Electrospeed graphical control system (GCS) 3

VSD signify a step change in electrical

submersible pumping (ESP) system control and

reliability while providing the most dependable

surface control systems in the industry.

The Baker Hughes Electrospeed GCS 3 includes

several innovative software additions that

protect the downhole ESP system from power

system interruptions, give operators optimum

startups in hard-start conditions such as heavy

oil applications, and allow a programmable

setpoint for gradual ramp up of production to

ensure minimal shock to the reservoir.

The GCS provides a user-friendly interface to

program and launch software features. The

GCS interface records, logs, and communicates

data from the drive and from any downhole

monitoring system to a laptop, SCADA, satellite

or Baker Hughes’s Vision™ service. These state-

of-the-art VSD capabilities provide operators

with the highest level of ESP system control to

optimize well and fi eld performance.

The Electrospeed GCS 3 is the only VSD with a

choice of output waveforms, ranging from the

standard ESP output to sine-wave output with

our fi ltered pulse-width modulation (FPWM™)

system. Baker Hughes also offers 6-pulse,

12-pulse, and 24-pulse GridSync™ converter

options. For areas where power companies

require IEEE compliance, GridSync converter

Electrospeed GCS 3 Indoor Variable Speed DriveProtect your ESP system with innovative software

OVERVIEW

Electrospeed, Vision, FPWM, GridSync, MaxStart, and MaxPoint are trademarks of Baker Hughes Incorporated.

Disclaimer of Liability: This information is provided for general information purposes only and is believed to be accurate as of the date hereof; however, Baker Hughes Incorporated and its affi liates do not make any warranties or representations of any kind regarding

the information and disclaim all express and implied warranties or representations to the fullest extent permissible by law, including those of merchantability, fi tness for a particular purpose or use, title, non-infringement, accuracy, correctness or completeness of the

information provided herein. All information is furnished “as is” and without any license to distribute. The user agrees to assume all liabilities related to the use of or reliance on such information. BAKER HUGHES INCORPORATED AND ITS AFFILIATES SHALL NOT BE

LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER INCLUDING BUT NOT LIMITED TO ITS NEGLIGENCE.

© 2013 Baker Hughes Incorporated. All rights reserved. 39738 11/2013

Indoor (NEMA 1 IP30*) Selection Guide

1 6-Pulse: The industry standard for applications without harmonics requirement.

2 12-Pulse Dual Switch: For applications with harmonic concerns when phased shifted power is applied directly to the input. Requires phase shift input transformer.

3 12-Pulse Power Distribution Block (no switch): For applications with harmonic concerns when input power is externally switched. Requires phase shift input transformer.

4 Recording Ammeter: For those who still prefer traditionalrecording methods.

5 Auxiliary 115 volts: Supplies 275 VA.6 Integration of Centinel or WellLift surface electronics into VSD for

seamless operation.7 RS-485 and RS-232 are standard; a VCI-42 module is available

for RS-422. 8 I/O Module: Up to three I/O Modules may be used (only two with the

FPWM option). Each module has the following I/O: (2) Analog inputs; (2) Analog outputs; (3) Digital inputs; (3) Digital outputs.

9 Brass Gland Plate: Removable gland plate provides the power entrance to the power J box. Brass provides a nonmagnetic gland plate (required when the field wiring is done with single conductors through an opening).

10 Data Card: PCMCIA and Compact Flash.

11 CE Options: A special trip coil located in the input breaker allows for removal of power to the drive for an E-stop condition.

12 IP20 Shielding: Lexan shields added to protect personnel from exposure to electrical components when the door is open.

13 Euro Heater: Small compact heater with an integral thermostatand blower that does not expose personnel to the more typical strip heater.

14 Wire Markers: Used to easily identify wire terminations meeting special requirements.

15 IEEE-519 compliant 24-pulse converter configuration. 66-519kVA sizes will be in the 4000 frame size. Requires 24-pulse phase-shift input transformer.

16 FPWM: Filtered PWM provides near sinusoidal wave to the motor.17 MOV: Surge suppressor that protects the unit in the event of

excessive transient voltages. Standard with NEMA 4 enclosures.18 Language Option: English, Russian, and Spanish are included in

current software. Other languages available upon request.19 RDCM Sensor Options: Remote Device Communication Module

interface for digital interface to third-party instrumentation to maintain certification.

* IP stands for “Ingress Protection” as determined by International Electrotechnical Commission Standard 60529. This standard provides designations for levels of industrial enclosure protection.

6-Pulse1

12-Pulse, Dual Switch2

12-Pulse, Power Dist. Switch3

Recording Ammeter4

115V Aux. Power5

Down Hole Gauging6

SCADA interface7

I/O Module (3 Max.)8

Brass Gland Plate9

Data Logging10

CE Option11

IP 20 Shielding12

CE Heater13

Wire Markers14

24P GridSync™ IEEE-51915

Sine Wave-FPWM™ Output16

Paint Options

Surge Suppressor/MOV17

Language Option18

RDCM Sensor Interface19

PLC Programming

Special Communications

Medium Voltage

Control Room Systems

Run Light Option

Shut Down Light Option

kVA@480V

2000 Series 4000 Series 8000 Series 9000 Series

Standard NEMA1 Unit: 6-pulse, carbon steel enclosure, beige, graphic display, stainless steel fasteners and door hinges

Standard Product Options Special Product Options

Model

Carbon Steel Enclosure

Stainless Steel Enclosure

Stan

dard

Opt

ions

Spec

ial O

ptio

ns

20602075210021252150220022504300435044004500860087008800890093119313931594179420

1150135015501750

624

748873

325

390454

8366

111130163

200260

519

1000

2000

meets IEEE 519-1992 recommended practice

for placing nonlinear loads on power systems.

The Electrospeed GCS 3 VSD is available in a

NEMA1/IP30 enclosure for indoor installations.

It is built with the same quality and durability as

our NEMA 4 outdoor drives, and is certifi ed in

the United States, Canada, and Europe.

With more than 50 years of engineering

expertise in the development of advanced

applications, Baker Hughes is the only ESP

system provider that designs and manufactures

its own line of VSDs specifi cally engineered

for the harsh environments and challenging

applications in the oil and gas industry.

For seamless integration of the entire ESP

production system, Baker Hughes is your single

point of contact.

Contact your Baker Hughes representative or visit

www.bakerhughes.com/artifi cial-lift today to fi nd

out how the Electrospeed GCS 3 VSDs can help

improve your ESP system control and reliability.