Upload
sabina-stokes
View
247
Download
0
Tags:
Embed Size (px)
Citation preview
Electronics and Control SystemsUnit 4 Revision Portfolio
Student Name
Student Name
Contents Task 1 – Metals Task 2 – Polymers Task 3 – Smart and Modern Materials Task 4 – Environmental Issues Task 5 – Electronic Components 1 Task 6 – Electronic Components 2 Task 7 – Power Sources Task 8 – Integrated Circuits 1 Task 9 – Integrated Circuits 2 Task 10 – Circuit Design Task 11 – Circuit Manufacture Task 12 – Calculations Task 13 – Anthropometrics and Ergonomics Task 14 – Signage
Student Name
Task 1 – Metals
By the end of this task you should be able to: Classify a range of commonly used ferrous metals. Classify a range of commonly used non-ferrous metals.
On the next two slides you should: List three characteristics of the different categories of metal, For each category of metal, list three specific varieties with their own
characteristics.
Student Name
Task 1.1 – Ferrous Metals
Student Name
Task 1.2 – Non-Ferrous Metals
Student Name
Task 2 – Polymers
By the end of this task you should be able to: Classify a range of commonly used thermoplastics. Classify a range of commonly used thermosetting plastics.
On the next two slides you should: List three characteristics of the different categories of polymer, For each category of polymer, list three specific varieties with their
own characteristics as follows: Thermoplastics – Three from the following list: ABS, Polystyrene, PVC, Nylon and
Acrylic, Thermosetting plastics – GRP, PCB Substrate and Epoxy Adhesive.
Student Name
Task 2.1 – Thermoplastics
Student Name
Task 2.2 – Thermosetting Plastics
Student Name
Task 3 – Smart and Modern MaterialsBy the end of this task you should be able to: Define what a smart material is and describe a range of smart materials. Define nanotechnology and describe its benefits and disadvantages. Define what is meant by Radio Frequency Identification (RFID) and describe how it is
currently used in the world around us.
On the next three slides you should: Create your own definition of what a smart material is by looking at a range of given
definitions, and prepare a brief summary of the working qualities of QTC and Memory Metals.
Create your own definition of what nanotechnology means by looking at a range of given definitions, and describe how nanotechnology is currently being used, including in nanowires, nanotubes, transistors and capacitors.
Create your own definition of what RFID is by looking at a range of given definitions and describe how it is currently being used in the world around us and the issues connected with its use, including active and passive devices.
Wikipedia Reference: http://en.wikipedia.org/w/index.php?title=Radio-frequency_identification&oldid=310519460
Student Name
Task 3.1 - Smart Materials
Student Name
Task 3.2 - Nanotechnology
Student Name
Task 3.3 – RFID
Student Name
Task 4 – Environmental IssuesBy the end of this task you should be able to: Discuss the impact of designs and designers on the environment. Describe a range of non-renewable and renewable sources of
energy and their impact on the environment. Discuss the implications of material choice on the lifecycle of a
product.
On the next two slides you should: Show that you know what ‘The Six Rs’ are and what they mean. Describe one non-renewable and one renewable source of energy
their impact on the environment. Show that you understand at least one of the following in terms of
material use, using examples: Life Cycle Analysis, Carbon Footprint.
Student Name
Task 4.1 – The 6Rs
Student Name
Task 4.2 – Energy Sources
Student Name
Task 4.3 – Material Choice
Student Name
Task 5 – Electronic Components 1By the end of this task you should be able to: Identify and describe a range of electronic components including:
Resistors, including Potential Dividers, Transistors, including Darlington Pairs, Light Dependent Resistors (LDRs), Light Emitting Diodes (LEDs), Thermistors, Diodes.
On the next three slides you should: Present a summary of each type of component including:
What it looks like in real life, What its circuit symbol is, What role it plays within a circuit.
Student Name
Task 5.1 – Resistors and Transistors
Student Name
Task 5.2 – LDRs and LEDs
Student Name
Task 5.3 – Thermistors and Diodes
Student Name
Task 6 – Electronic Components 2By the end of this task you should be able to: Identify and describe a range of electronic components including:
Relays, Seven Segment Displays, Motors, Solenoids, Buzzers, Speakers.
On the next three slides you should: Present a summary of each type of component including:
What it looks like in real life, What its circuit symbol is, What role it plays within a circuit.
Student Name
Task 6.1 – Relays and Seven Segment Displays
Student Name
Task 6.2 – Motors and Solenoids
Student Name
Task 6.3 – Buzzers and Speakers
Student Name
Task 7 – Power Sources
By the end of this task you should be able to: Identify a range of different types of battery. Describe what a capacitor is and how it can be used as a power
source. Describe how solar power can be used to generate electricity.
On the next three slides you should: Show an image of the range of common battery sizes and suggest
what they could be used for. Describe what a capacitor is and suggest how it can be used as a
power source. Describe how a photovoltaic cell works.
Student Name
Task 7.1 – Batteries
Student Name
Task 7.2 – Capacitors
Student Name
Task 7.3 – Solar Power
Student Name
Task 8 – Integrated Circuits 1
By the end of this task you should be able to: Describe what an Integrated Circuit is. Define what DIL means. Define what PIC means. Understand what binary means and how it is used in electronics. Understand the range of logic gates available and how they work.
On the next three slides you should: Describe what IC stands for and how the term DIL is relevant. Describe the benefits and disadvantages of using PIC technology. Show the range of logic gates that are available and show how the
way they work can be described using binary in truth tables.
Student Name
Task 8.1 – ICs and DIL
Student Name
Task 8.2 – PIC Technology
Student Name
Task 8.3 – Binary and Logic
Student Name
Task 9 – Integrated Circuits 2
By the end of this task you should be able to: Describe how a 555 IC can be used in a timing circuit. Describe how a 741 IC can be used in a sensing circuit. Describe how ICs can be used in counting circuits.
On the next two slides you should: Show how a 555 IC can be used in an astable timing circuit and a
monostable timing circuit, and describe the difference between the two.
Show how a 741 IC can be used as a comparator in a sensing circuit.
Show how an IC can be used in a counting circuit.
Student Name
Task 9.1 – 555 IC
Student Name
Task 9.2 – 741 IC
Student Name
Task 9.3 – Counting
Student Name
Task 10 – Circuit DesignBy the end of this task you should be able to: Describe the systems approach including Input, Process, Output
and Feedback. Describe the advantages and disadvantages of the use of
breadboards in circuit design. Describe the advantages and disadvantages of computer aided
design (CAD) simulation in circuit design.
On the next three slides you should: Show that you understand the systems approach by producing a
systems diagram for the alarm system for the DT Block. Show a photograph of a breadboard and list its advantages and
disadvantages. Show a screen shot from both Crocodile Technology and PCB
Wizard, explain why both pieces of software are used, and what the advantages and disadvantages are of using them.
Student Name
Task 10.1 – Systems Approach
Student Name
Task 10.2 – Breadboards
Student Name
Task 10.3 – Computer Aided Design
Student Name
Task 11 – Circuit ManufactureBy the end of this task you should be able to: Describe at least one method of manufacturing printed circuit
boards. Describe how to undertake a fault finding exercise on a circuit
board. Describe how to connect two different circuit boards together
effectively.
On the next three slides you should: Using a flow diagram, show the process of manufacturing a circuit
using either traditional methods or inkjet technology. Describe, using notes and sketches, how you would use a multi-
meter to undertake a fault finding exercise on a circuit board. Describe at least two different methods of connecting circuit boards
together, including their advantages and disadvantages.
Student Name
Task 11.1 – Circuit Manufacture
Student Name
Task 11.2 – Fault Finding
Student Name
Task 11.3 – Connecting Circuit Boards
Student Name
Task 12 – Calculations
By the end of this task you should be able to: Understand the basic units used in electronics and their multiples. Demonstrate how Ohm’s Law can be used in electrical calculations. Calculate the total voltage of resistors in series and parallel. Calculate the output voltage of a potential divider.
On the first slide, you should complete the tables showing you understand all the basic electronic units and what their multiples mean. One in each table has been completed for you.
One the following three slides you should complete the calculations given to you using the formulae you have been given.
Student Name
Task 12.1 – Basic UnitsUnit Common
NameSymbol Alternate
SymbolNamed After
Capacitance
Current
Potential Difference
Voltage V none Alessandro Volta
Power
Resistance
Multiple Common Name
Symbol Sub-multiple
Common Name
Symbol
106 10-3
103 10-6 micro μ
10-9
10-12
Student Name
Task 12.2 – Ohm’s Law
Formula
V
RI
Using the formula given, complete the following calculations:
1. What resistance could you use with a 10V power supply to limit the current to 15mA?
2. A 430Ω resistor protects an LED in a 5V circuit. What is the current through the LED?
3. 12mA runs through a protective resistor of resistance 820Ω. What is the voltage across the resistor?
Answer 1 Answer 2 Answer 3
Student Name
Task 12.2 – Resistors in Series and ParallelUsing the formulae given, complete the calculations below.
Resistors in Series Formula: Rt = R1 + R2 + R3
47 M 47 M 47 M
R1 R2 R3
47 M 47 M 47 M47 M 47 M 47 M
R1 R2 R3
Resistors in Parallel Formula: 1 = 1 + 1 + 1
Rt R1 R2 R3R1
R2
R3
R1
R2
R3
Answer
Answer
Note: All three resistors in parallel are 47MΩ
Student Name
Task 12.2 – Potential Divider
Formula: Vs = R2 .x V
R1 + R2
A 27kΩ and a 62kΩ resistor are used in a potential divider using a 12V power supply. Using the set-up below, calculate the output voltage of the potential divider.Answer
+12V
0 V
R1
= 27k
R2
= 62k
+12V
0 V
R1
= 27kΩ
VSR2
= 62kΩ
Student NameStudent Name
Task 13 – Anthropometrics and ErgonomicsBy the end of this task you should be able to: Define ergonomics and anthropometrics. Discuss the interaction between people and the products they use and the
impact human size has on design. Describe the application of anthropometric data to solve practical problems.
On the next two slides you should: Define what is meant by the terms ergonomics and anthropometrics and
suggest how they might impact of the design of products. Collect a range of anthropometric data, i.e. height, arm length, etc… from at
least seven different people and present the data in graphical form.
Student Name
Task 13.1 – Ergonomics and Anthropometrics
Student Name
Task 13.2 – Data Presentation
Student NameStudent Name
Task 14 – Signage
By the end of this task you should be able to: Identify and describe a range signs and symbols giving valuable
information about materials, products and safety issues
On the next three slides you should: Identify and describe three signs relating to environmental issues, Identify and describe three signs relating to product standards, Identify and describe three signs relating to safety issues.
Student Name
Task 14.1 – Environmental Signage
Student Name
Task 14.2 – Standards Signage
Student Name
Task 14.3 – Safety Signage