Embed Size (px)
DESCRIPTION
If you work with or close to any live elements, it is essential to take precautions. An electric shock occurs when you come in to contact with a live element or a conductor such as water or metal which forms a link between you and the electrical device. Checkout the 5 electrical safety measures that ensures safety while working on electrical installations. A presentation of Current Solutions PC the leading electrical engineering company in New York.
Citation preview
Electrical Safety
The 5 Essential Workplace Electrical Safety Measures
The following five safety measures should
always be applied when working on electrical
installations or equipment.
Disconnect the installations.
Ensure installation cannot
be switched on without
your knowledge.
Check installation is not live.
Ensure the installation is earthed.
Remove or isolate
potential conductors.
By always following these five safety measures in the
correct order, you can work safely. Once the work is
finished, reverse the procedure to put the installation back
to working order.
Learn more about workplace electrical safety
and make sure that you, your facility, and
employees are protect against all sorts of
electrical hazards with Current Solutions PC’s
12 phase electrical safety program.
A Presentation of
Current Solutions PC
www.CurrentSolutionsPC.com
636 North Broadway,
White Plains, NY
914-347-8480
888-997-6937
Click HERE to Request
free Information about
choosing or using NFPA-
70E 2012 HRC Tables Vs
IEEE 1584 Incident Energy
Calculations
