Electrical Reference Standards-1

7/26/2019 Electrical Reference Standards-1

1/6

S.no STANDARD CODE APPLICATION & REFERENCE DESCRIPTION

INSTITUTE OF ELECTRICAL & ELECTRONICS ENGINEERS (IEEE)

1 IEEE.114.(2010) Standard Test Procedure for Single-Phase Induction Motors

2 IEEE519-(1992) Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems

3 IEEE Std 242-(2001) Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems

4 IEEE Std 18-(2002) Standard for Shunt Power Capacitors

5 IEEE Std 80-(2000) Guide for Safety in AC Substation Grounding

6 IEEE 141_(1993) IEEE Recommended Practice for Electric Power Distribution for Industrial Plants

NATIONAL ELECTRICAL CODE & NATIONAL FIRE PROTECTION ASSOSCIATION

1 NEC (2011)-NFPA 70 National Electrical Code

2 NFPA 780-(2004) Standard for Installation of Lighting Protection Systems

3 NFPA 30-(2008) Flammable and Combustible Liquids Code

4 NFPA 58 (2001) Standard for the Storage and Handling of Liquefied Petroleum Gases

OIL INDUSTRY SAFETY DIRECTORATE (OISD)

1 OISD-GDN-115(2000) Guidelines on Fire Fighting, Equipment and Appliances in Petroleum Industry

2 OISD-GDN-180 (1999) Lightning Protection

3 OISD-GDN-227 (2007) Emergency Response Preparedness In E&P Industry

4 OISD-GDN-232 (2013) Identification Of Hazards And Control Measures In E&P Industry

5 OISD-RP-108 (2013) Recommended Practices On Oil Storage And Handling

6 OISD-RP-110 (1999) Recommended Practices On Static Electricity

7 OISD-RP-147 (2002) Inspection And Safe Practices During Electrical Installations

8 OISD-RP-148 (2000) Inspection And Safe Practices During Overhauling Electrical Equipment

9 OISD-RP-149 (2013) Design Aspects For Safety In Electrical System

10 OISD-STD-113 (2013) Classification Of Areas For Electrical Installations At Hydrocarbon Processing And Handling Facilities

11 OISD-STD-116 (2007) Fire Protection Facilities For Petroleum Refineries & Oil/Gas Processing Plants

ELECTRICAL CODES AND STANDARDS


2/6

12 OISD-STD-117 (2012) Fire Protection Facilities For Petroleum Depots, Terminals, Pipeline Installations And Lube Oil Installations

13 OISD-STD-118 (2008) Layouts For Oil And Gas Installations

14 OISD-STD-119 (2008) Selection, Operation & Maintenance Of Pumps

15 OISD-STD-120 (2008) Selection, Operation & Maintenance Of Compressors

16 OISD-STD-137 (2010) Inspection Of Electrical Equipment

17 OISD-STD-141 (2012) Design, Construction And Inspection Requirements For Cross Country Liquid Hydrocarbon Pipelines

18 OISD-STD-142 (1996) Inspection Of Fire Fighting Equipment And Systems

19 OISD-STD-144 (2008) Liquefied Petroleum Gas (LPG) Installations

20 OISD-STD-150 (2008) Design And Safety Requirements For Liquefied Petroleum Gas Mounded Storage Facility

21 OISD-STD-173 (2003) Fire Prevention And Protection System For Electrical Installations

BRITISH STANDARDS (BS)

1 BS-7430-(1998) Code of practice for Earthing

2 BS-6651 (1999) Code of practice for protection of structures against lightning

3 BS 7361-(2002) Cathodic protection- Code of practice for land and marine applications

4 BS 6121-1,2,3,4 & 5-(1999) Mechanical cable glands

5 BS 5489-(2003) Code of practice for the design of road lighting

6 BS 5266-1,2,3,4,5,6 & 7 (1999) Emergency lighting

7 BS 7671 :(2008) Requirements for Electrical Installations

INTERNATIONAL ELECTRO TECHNICAL COMMISSION (IEC)

1 IEC 60038 (2002) IEC Standard voltages

2 IEC 60332-3 ; 3-23 ; (1999) Test on electric cables under fire conditions

3 IEC 60044-1,2,3 (2003) Instrument transformers

4 IEC 60076-1,2,4,5,10,11 (2000) Power transformers

5 IEC 60079-0, 10 ,14 (20'02-10) Electrical apparatus for explosive gas atmospheres

6 IEC 60183 (1984) Guide to the selection of High Voltage cables

7 IEC 60255-3 ,5,6,8 ,13, 22, 23 & 24 (1990, 2000) ElectricaI relays


3/6

8 IEC 60287-1-1,1-2 & 1-3 ; 2-1,2-2 ; 3-1 (2001-11) Electric cables

9 IEC 60331-11,21,23 ; 3-23 ; 5-23 ; (1999) Fire resisting characteristics of electric cables

10 IEC 60439-1,2,3,4 & 5 (1996) Low-voltage switchgear and controlgear assemblies

11 IEC 60502-1,2,4 (2004,2005,1999)Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to

30 kV (Um = 36 kV)

12 IEC 60529 (2001-02) Degrees of protection provided by enclosures (IP Code)

13 IEC 60598-1,2 , 2-14 , 2-22 (1997) Luminaires

14 IEC 60811-1-1/2/3 ; 2-1 ( 2000,2001) Common test methods for insulating and sheathing materials of electric cables and optical cables

15 IEC 60831-1 (1996) Shunt Power Capacitors of the self-healing type for a.c systems having a rated voltage upto including 1000V

16 IEC 60909-0,1,2,3 & 4 (2002) Short-circuit currents in three-phase a.c. systems - Calculation of currents

17 IEC 62305-1,2,3 & 4 (2010) Protection against lightning

18 IEC 60228 (1982) Conductors of Insulated cables - Guide to the dimensional limits of circular conductors

19 IEC60364-5-52/523-1/2 ; -4-41/43 (1999) Electrical Installation of Buildings

20 IEC 60227-3,7 (2001) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V

21 IEC.60034.1,5,9 (2004,2000) Rotating electrical machines

22 IEC.60079.1,2,6,7,15,17,25,29 (2007) Explosive Atmospheres

23 IEC.60534-1, .2.1/2.3 ; 3-1/3-2 ; 4 ; 8-3 ; 8-4 Industrial-Process Control Valves

24 IEC.60947.1,2,3,4-1,2,3 & 5-1,2 ; 6-1 (2007,2003,1999) Low-voltage switchgear and controlgear

25 IEC.62271.1 , 102 , 105, 200 , 201 , 203 , 207 (2007) High-Voltage Switchgear and Controlgear

26 IEC 60479-1 (2005-07) Effects of current on human beings and livestock

27 IEC 61537 (2006) Cable Management - Cable tray systems and cable ladder systems

28 IEC 61892-1,2,3,4,5,6,7 (2007-2012) Mobile and fixed offshore units Electrical installations

29 IEC 60751 (1999) Industrial Platinum Thermometer sensors

30 IEC 60617-1 ,2,3 (1996) Graphical Symbols for Diagrams

31 IEC 62040 (2002-08) Uninterruptible power systems (UPS)

32 IEC 61439-1 (2011-08) Low-voltage switchgear and controlgear assemblies

33 IEC 60708 (2005-06) Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath


4/6

34 IEC 61131-3 Programmable controller (PLC)

INDIAN STANDARDS (IS/BIS)

1 THE INDIAN ELECTRICITY RULES, (1956)

2 IS.1332.(1986) precast reinforced concrete street lighting poles

3 IS.2193.(1986) Precast Prestressed Concrete Street Lighting Poles

4 IS.10322.1,2,3,4 & 5-1 /5.2 /5.3 /5.4 /5.5 (2012) Luminaires

5 IS.13383.1,2,3 (1992) Methods of Photometry of Luminaires

6 IS 694-(1990) PVC Insulated cables for working voltages up to including 1100volts and specification

7 IS 692 Paper Insulated Lead Sheathed Cables for Rated Voltage Up To and Including 33 Kv Specification

8 IS 2309 (1989 R2005) Protection of Buildings and Allied Structures against Lightning Code of Practice

9 IS 2633-(1986) Method of testing Uniformity of coating on Zinc coated articles

10 IS 3043 (1997,1998) Code of Practice for Earthing

11 IS 3975 (1988) Specification for mild steel wires , formed wires and tapes for armouring of cables

12 IS 4722 (2001) Rotating Electrical Machines - Specification

13 IS 5831-(1984) PVC Insulation and sheathing of Electric Cables

14 IS.325.(1996) Three-phase induction motors

15 IS.1248.1,2,3,4,5,6,8,9, (2003) Direct Acting Indicating Analogue Electrical Measuring Instruments and their Accessories

16 IS.1460.(2005) Automotive Diesel Fuel

17 IS.1885.17.1979 ( Reaffirmed 2002 ) Electrotechnical vocabulary : Part 17 - Switchgear and control gear

18 IS.1885.32 ( Reaffirmed 2002 ) Electrotechnical Vocabulary

19 IS.2026.1,2,3,4,5,7,8,10 (2011 , 2010, 2009) Power Transformers

20 IS.2705.1,2,3 & 4 (1992) Current transformers

21 IS.3231.1.3, 2.1,2.3 , 3.1 (1986,1987) Electrical realys for power system protection

22 IS.3639.(1966) Fittings and Accessories for Power Transformers

23 IS.3844.(1989) Code of Practice for Installation and Maintenance of Internal Fire Hydrants and Hose Reels on Premises

24 IS 3961 PART 2,4,5 Recommended Current Ratings for Cables


5/6

25 IS.4201.1983(1) Application Guide for Current Transformer

26 IS_4759 (1996) Hot-Dip Zinc coatings on structural steel and other allied products-specification

27 IS.5422.(1996) Turbine type generators

28 IS.5571.(2009) Guide for Selection and installation of Electrical Equipment for Hazardous Areas (other than mines)

29 IS.5572.(2009)Classification of hazardous areas (other than mines) having flammable gases and vapours for electrical

installation

30 IS.5831.(1984) PVC insulation and sheath of electric cables

31 IS.5819 Recommended Short-Circuit T Ratings of High Voltage PVC Cables

32 IS 6474 Specification for Polyethylene Insulation and Sheath of Electric Cables

33 IS 6600 (1972) Guide for loading of oil immersed transformers

34 IS.6665.(1972) Code of practice for industrial lighting

35 IS.7098.1,2,3 (1998,2011,1993)Crosslinked polyethylene insulated PVC sheathed cables, Part 1: For working voltage upto and including

1100 V

36 IS 7132 (1973) Guide for testing synchronous machines

37 IS.7204.1,2 (1974,1980) Stabilized power supplies dc output

38 IS.7820.(2004) Electrical Apparatus for Explosive Gas Atmospheres - Method of Test for Ignition Temperature

39 IS.8084.(1976) Interconnecting busbars for ac voltage above 1 kV up to and including 36 kV

40 IS.8130 (1984) Specification for Conductors for Insulated Electric cables and Flexible cords

41 IS.8623.1,2,3 (1993)Low-Voltage Switchgear and Control gear Assemblies, Part 1: Requirements for Type-Tested and Partially

Type-Tested Assemblies

42 IS 8686 (1977) Static protective relays

43 IS 8784 (1987) Specification for Thermocouple Compensating Cables

44 IS.8789(1996) Values of performance characteristics for three-phase induction motors

45 IS.9402 (1980) High voltage fuses for the external protection of shunt power capacitors

46 IS.9974.1,2 (1981) High pressure sodium vapour lamps

47 IS.10000.1,2,3,4,5,6,7,8,9,10,11,12,13 (1980) Method of tests for internal combustion engines

48 IS.10028.1/2/3 (1981) Code of Practice for Selection, Installation and Maintenance of Transformers

49 IS.10189.1, 2.1 , 2.2 (1993) Industrial process control valves

50 IS.12360 (1988) Voltage Bands for Electrical Installations Including Preferred Voltages and Frequency


6/6

51 IS.13340. (1993) Power Capacitors of self healing type for AC power systems having rated voltage upto 650V

52 IS.13341 (1992) Requirements for ageing test, self healing test & destruction test

53 IS.13573.1,2,3 (2011)Cable Accessories for Extruded Power Cables, Part 1: for Working Voltages for 1.1 kV upto and Including

3.3kV(E) - Test Methods and Test Requirements

54 IS.14254.1 , 2 (2006) Programmable controller, Part 1: General information

55 IS.14927.1 , 2 (2001) Cable Trunking and Ducting Systems for Electrical Installations

56 IS.15999.2.1.(2011) Rotating Electrical Machines

57 IS.iec.60034.1,5,8 (2004 , 2000) Rotating electrical machines

58 IS.iec.60071.1 , 11 (2006) Insulation Co-ordination

59 IS.iec.60320.1 , 2.2 , 2.3 (2001,1998) Appliance couplers for household and similar general purposes

60 IS.iec.60529.(2001) Degrees of protection provided by enclosures (IP Code)

61 IS 9537 (1980,1983) Conduits for electrical installations

62 IS 10810.43 General Methods of Test for Cables

63 IS.iec.60947.1,2,3,4.1 , 4.2 , 4.3 , 5.1 , 5.2 (2007,2003, 2000, 1999) Low-voltage switchgear and controlgear

64 IS.iec.62271.1.(2007) High-Voltage Switchgear and Controlgear

65 IS-1554 (1990) Specification for PVC insulated heavy duty cables (electric cables)

66 IS 3646 (1992) Code of Practice for Interior Illumination

67 IS 15382-1,2,3,4, (2003) Insulation Coordination for Equipment within Low-Voltage Systems,

National Electric Manufacturers Assosciation (NEMA)

1 NEMA STANDARDS VE 1- (1991) Metallic Cable Tray Systems

2 NEMA April (2006) Product related scopes of NEMA subdivisions

Documents

Electrical Reference Standards-1