Electrical Conduit Rigid Entry Boot

Electrical Conduit Rigid Entry BootAPT™ brand rigid entry boots allow you to connect electrical conduit to containment sumps with a significant reduction in installation time, while also completely removing exposed rubber from the connection. This durable entry boot requires only a single 2.75” entry hole for installation, removing the time-consuming process of drilling multiple holes for fastening purposes.

A clamping nut and two clamping seals are used to compress the fitting into place against the sump wall simply by tightening it into place, providing a watertight connection between the boot and the sump surface. The same method is used to seal the pipe into place simply by tightening the integrated conduit seal nut. The interior pipe seal then compresses on to the pipe, providing another watertight connection between the boot and pipe.

Highlights

•Design requires only a single 2.75” entry hole offering a significant reduction in installation time.

•Features a dual-seal design that will work with either galvanized or coated conduit.

•Suitable for use with flat and round sump surfaces and polyethylene or fiberglass sumps.

•A clamp plate and two gasketed seals ensure a watertight connection.

PIPING & CONTAINMENT SYSTEMS

Approvals

•ULc listed when installed with APT™ brand ULc listed sumps.

Specifications•Body material: Glass-filled nylon •Interior length once installed: 3¼”

Components

Conduit Seal Nut

Clamping Nut

Main Body

Conduit Seal

Clamping Seal

3760 Marsh Rd. • Madison, WI 53718, USATel: +1 608 838 8786 • Fax: +1 608 838 6433Tel: USA & Canada +1 800 225 9787 • Tel: UK +44 (0)1473 243300

franklinfueling.com

Tel: Mex 001 800 738 7610 • Tel: FR +33 (0)1 69 21 41 41 • Tel: CH +86 10 8565 4566 FFS-0280 10-13

Model Description

REB-C-0075 Rigid entry boot ¾" conduit/ flat surface

REB-C-0100 Rigid entry boot 1" conduit/ flat surface

REB-C-R-0075 Rigid entry boot ¾" conduit/ round surface

REB-C-R-0100 Rigid entry boot 1" conduit/ round surface

Note: Each size of rigid entry boot utilizes the same body allowing you to switch out the conduit seal to fit different pipe sizes in the field if necessary.

Ordering Information

Model Description

408066001 Conduit seal ¾" (replacement)

408066002 Conduit seal 1" (replacement)

408070001 Clamping seal (flat) (replacement)

408072001 Clamping seal (round) (replacement)

•Clamp nut and nut material: Glass-filled nylon•Face seal and pipe seal material: Nitrile