Upload
vuongcong
View
216
Download
2
Embed Size (px)
Citation preview
Electric tools
Woodworking
Garden equipment
Drills & hammer drills 4-6
Cordless screwdrivers 6-11 Angle grinders & grinders 12-16 Hand-held circular saws & jigsaws 18-20
Electric planes & cutters 21-22
Solder guns & hot glue guns 23
Machine sets 24-25
Double grinders 26
Tile and stone cutting machines 28-29
Drag crosscut and mitre saws 30-31
Bench circular saws 32-34
Band saws & metal crosscut saws 35-36
Column drills 37
Compressors 38-41
Electric shielding gas welding sets 42-43
Generators 45-47
Cable hoists 48
Pressure washers 49-50
Wet & dry vacuum cleaners 51-52
Lawn trimmers 54
Motor scythes & motor trimmers 55
Lawnmowers & cultivators 56
Cordless lawn care tools 57
Hedge cutters 58
Chainsaws 59-60 Domestic waterworks 61
Garden pumps 62
Dirty water pumps 63
Leaf blowers 64
Petrol hoes 65
Garden shredders & garden sprayers 66
Table of contents - Tools and Garden Equipment
Drilling, hammer drilling
Hammer drillsPowerful, ergonomically balanced hammer drills with keyless chucks. Can be switched from drilling to hammer drilling and vice versa. Impact-resistant plastic casing, electronic drilling speed control. Additional power handle with integral depth stop for easy, effective working.
ED-E 850Impact drill
Article number: 120.100.094
Mains: 230 V~50 HzRating: 850 WDrilling capacity: Steel 13 mmSpeed: 0-2,900 rpm
Features:Keyless chuck 0-13 mmAuxiliary handleDeep ruler
ED-E 500-13Hammer drill
Mains: 230 V~50 HzRating: 500 WDrilling capacity: Wood 20 mm Concrete 13 mm Steel 10 mmSpeed: 0-2,600 rpm
Article number: 120.100.054 EAN-Code: 4250116801954
Features:Infinite electronic speed controlDrilling and hammer drillingKeyless chuck: 2-13 mmAdditional handle with depth stop
ED-E 1050-16Professional hammer drill
Article number: 120.100.034 EAN-Code: 4250116800063
Mains: 230 V~50 Hz Electronic 2-speedRating: 1050 WDrilling capacity: 1.5-13 mmSpeed: 1st speed: 0-1,000 rpm 2nd speed: 0-3,000 rpm
Features:Electronic reversing facility2-speedHammer drillingSecond handle with depth stopKeyless chuck
4
EHD 1400-28Hammer drill in case
Optional accessories: SDS-Plus drill bit set (diameter 5/6 x 100; 8,10,12 x 150; 14,16 x 200; 18,22 x 350), Article number: 120.210.010SDS-Plus chisel set (2x pointed chisels, 1x flat chisel), Article number: 120.210.020
Mains: 230 V ~ 50Rating: 1,400 WSpeed: 680 rpmStroke speed: 3,600 rpmDrilling capacity: 260 mm concrete/steelHammer force: 4.2 J
Article number: 120.200.074 EAN-Code: 4250116890767
Features:SDS-Plus mountingAdditional handle with depth stopHammer stop for starting holesRotation stop for chisellingDrill bit diameters 8/10/12 – 150 mm1x pointed chisel1x flat chiselDust capin PVC case
Drilling, hammer drilling Drilling, hammer drilling, chiselling
Hammer drillsPowerful, comfortable hammer drill with SDS-Plus mounting for drilling, hammer drilling and chiselling.Can be switched over: Hammer stop for starting holes, rotation stop for chiselling.Ideal for renovation and demolition work.
5
EHD 1000-26Hammer drill in case
Optional accessories: SDS-Plus drill bit set (diameter 5/6 x 100; 8, 10, 12 x 150; 14,16 x 200; 18,22 x 350), Article number: 120.210.010SDS-Plus Chisel set (2x pointed chisels, 1x flat chisel), Article number: 120.210.020
Mains: 230 V ~ 50Rating: 950 WSpeed: 900 rpmStroke speed: 4,500 rpmDrilling capacity: 260 mm concrete /steelHammer force: 4.0 J
Article number: 120.200.064 EAN-Code: 4250116890750
Features:SDS-Plus mountingAdditional handle with depth stopHammer stop for starting holesRotation stop for chisellingDust capin PVC case
Optional accessories: SDS -Plus-Hammer drill set, (Ø 5, 6 x 100; Ø 8, 10, 12 x 150; Ø 14, 16 x 200; Ø 18, 22 x 350), Article number: 120.210.010SDS-Plus-Chisel set (2 x pointed chisel, 1 x flat chisel), Article number: 120.210.020
EHD 851-28-SetHammer drill
Article number: 120.200.0204EAN-Code: 4250116800117
Mains: 230 V~50 HzRating: 850 WSpeed: 750 rpmStroke speed: 2,920 rpmDrilling capacity: 28 mm concrete/SteelHammer force: 3.5 J
Features:Sturdy metal hammer unitSDS-Plus mountingAdditional handle with depth stopHammer stop for starting holesRotation stop for chiselling workDrill bits: 8, 10 and 12 mm1x pointed chisel1x flat chiselDust capCase
EHD 1010Hammer Drill
Article number: EAN-Code:
Product Description 900w Hammer DrillSpecificationRated Voltage 230VRated Frequency 50HZ Rated Power 900WRated Speed 850r/minMax Drilling Diame 26mm
EHD 800Hammer drill
Article number: 120.200.094 EAN-Code: 4250116892600
Mains: 230 V~50 HzRating: 800 WIdling speed: 0-780 rpmStroke speed: 0-3,900 rpmDrilling capacity in concrete: 26 mm diameterHammer force: 3 J
Features:3 functions: Drilling, hammer drilling, chisellingSDS-Plus mountingAdditional handleDepth stopElectronic controlPlastic caseDrill bits: 8/10/12 mmPointed and flat chisels
Drilling, hammer drilling, screwing
Hammer drill and cordless screwdrivers
Powerful and ergonomically balanced hammer drill with SDS-Plus mounting for drilling, hammer drilling and demolition work. Can be switched over: Hammer stop for starting holes, rotation stop for chiselling.
Powerful and ergonomically balanced cordless screwdriver for working at home, on a site or in the garden. For fast screwing and drilling without requiring a mains socket. With electronic speed control, battery charger and lots of accessories.
6
EHD 1210Hammer Drill
Article number: EAN-Code:
Product Description 1200w Hammer DrillSpecificationRated Voltage 230VRated Frequency 50HZ Rated Power 1200WRated Speed 900r/minMax Drilling Diame 30mm
CD 24-2 SI Set2-speed cordless drill/hammer drill/screwdriver
Article number: 120.300.034 EAN-Code: 4250116800094
Features:2-speed hammer drillD-handle cordless screwdriver with electronic speed controlMetal gearboxHammer drill functionincluding two 24 V, 1.2 Ah batteries17 torque settingsincluding 16-piece set in plastic caseBatter charger: 1 hour charger
Rating: 24 V – 1.2 Ah Ni-Cd batterySpeed: 0-500 rpm 1st gear 0-1,400 rpm 2nd gear Reversing facilityKeyless chuck: 13 mmDrilling capacity: Wood 15 mm Metal 10 mmCharging time: 1 hourGearbox: 2-speed gearbox
CD 18-PROMO2-speed cordless screwdriver
Article number: 120.300.100 EAN-Code: 4250116891764
Features:T-handle cordless screwdriver with electronic speed control2 NC battery, 18 V16 torque settingsKeyless chuck 10 mmHigh speed charger 1 hourincluding 16-piece set in plastic case
Rating: 18 V – 1.3 Ah Ni-Cd batterySpeed: 0-550 rpm 0-1,050 rpmKeyless chuck: 1-10 mmDrilling capacity: Wood 10 mm Metal 8 mmCharging time: 1 hour
Cordless screwdrivers and drills Powerful and ergonomically balanced cordless screwdriver with double power for work at home, on site or in a workshop. For fast screwing and drilling without requiring a mains socket. PIC charge control in the charging station.With electronic speed control, battery charger and lots of accessories.
7
Drilling, screwing
CD 18-2 SI Set2-speed cordless screwdriver
Article number: 120.300.040 EAN-Code: 4250116801299
Features:2-speed cordless drill and screwdriverT-handle cordless screwdriver with electronic speed control2 NC battery, 18V16 torque settingsKeyless chuck 10 mmincluding 16-piece set in plastic caseBattery charger: 1 hour
Rating: 18 V – 1.2 Ah Ni-Cd batterySpeed: 0-550 rpmKeyless chuck: 1-10 mmDrilling capacity: Wood 10 mm Metal 8 mmCharging time: 1 hourGearbox: 2-speed gearbox
Drilling, screwing
Cordless screwdrivers and drills Powerful and ergonomically balanced cordless screwdriver for work at home, on site or in a workshop. For fast screwing and drilling without requiring a mains socket. Charge control in the charging stationWith electronic speed control, battery charger and lots of accessories.
8
AK 14.4Cordless screwdriver
Article number: 120.300.314 EAN-Code: 4250116892327
Features:T-handle cordless screwdriver with electronic speed control16 torque settingsBattery charger: 3-5 hours
Rating: 14.4 V – 1.2 Ah Ni-Cd batterySpeed: 0-550 rpmKeyless chuck: 1-10 mmDrilling capacity: Wood 10 mm Metal 8 mmCharging time: 3-5 hours
AK 18-2 SetCordless screwdriver
Article number: 120.300.364 EAN-Code: 4250116892341
Features:T-handle cordless screwdriver with electronic speed controlIncluding two 18 V batteries 16 torque settingsBattery charger: 3-5 hoursincluding 16-piece set in plastic caseKeyless chuck 10 mm
Rating: 18 V – 1.2A h Ni-Cd batterySpeed: 0-550 rpmKeyless chuck: 1-10 mmDrilling capacity: Wood 10 mm Metal 8 mmCharging time: 3-5 hours
AK 18 SetCordless screwdriver
Article number: 120.300.354 EAN-Code: 4250116892334
Features: T-handle cordless screwdriver with electronic speed control1 NC battery, 18V16 torque settingsKeyless chuck 10 mmPresentation boxBattery charger: 3-5 hoursincluding 16-piece set in plastic case
Rating: 18 V – 1.2 Ah Ni-Cd batterySpeed: 0-550 rpmKeyless chuck: 1-10 mmDrilling capacity: Wood 10 mm Metal 8 mmCharging time: 3-5 h
AK 14.4 LiCordless screwdriver
Article number: 120.300.400 EAN-Code: 4250116892952
Features:T-handle cordless screwdriver with electronic speed control16 torque settingsBattery charger: 5-6 hoursincluding 16-piece set in plastic caseLithium-ion batteryNo memory effect
Rating: 14.4 V – 1.3 Ah Lithium batterySpeed: 0-550 rpmKeyless chuck: 1-10 mmDrilling capacity: Wood 10 mm Metal 8 mmCharging time: 5-6 hours
AK 18 Li Set Cordless screwdriver
Article number: 120.300.390 EAN-Code: 4250116892945
Features:T-handle cordless screwdriver with electronic speed control16 torque settingsBattery charger: 5-6 hoursincluding 16-piece set in plastic caseLithium-ion batteryNo memory effect
Rating: 18 V – 1.3 Ah Lithium batterySpeed: 0-550 rpmKeyless chuck: 1-10 mmDrilling capacity: Wood 10 mm Metal 8 mmCharging time: 3-5 h
Cordless screwdrivers and drills with lithium-ion battery
Powerful and ergonomically balanced cordless screwdriver for work at home, on site or in a workshop. For fast screwing and drilling without requiring a mains socket. Durable lithium-ion battery with no memory effect. Charge control in the charging station.With electronic speed control, battery charger and lots of accessories.
9
Drilling, screwing
AK 18-2 SetCordless screwdriver
Article number: 120.300.364 EAN-Code: 4250116892341
Features:T-handle cordless screwdriver with electronic speed controlIncluding two 18 V batteries 16 torque settingsBattery charger: 3-5 hoursincluding 16-piece set in plastic caseKeyless chuck 10 mm
Rating: 18 V – 1.2A h Ni-Cd batterySpeed: 0-550 rpmKeyless chuck: 1-10 mmDrilling capacity: Wood 10 mm Metal 8 mmCharging time: 3-5 hours
CD 3.6-46 Li Set Quick DrillCordless screwdriver with toolbox charging station
Article number: 120.300.114 EAN-Code: 4250116891412
Rating: 3.6 V-1.4 AhCharger: 3-5 hour chargerBattery: Lithium-Battery-300mASpeed: 0-150 rpmMounting: 6.35 mm diameterCharging time: 3-5 hours
Features:Charge status indicatorDocking station including wall mountingMagnetic holdersIncluding 45 different bits
Drilling, screwing
Cordless screwdriver with toolbox charging station
Small, handy cordless screwdriver for quick jobs at home. For fast screwing and drilling without requiring a mains socket. Combined battery charging station with bits, magnetic holder and drill bits.
CD 4.8 Set Quick Drill CD 3.6-24 LiGun cordless screwdriver / drill
Article number: CD 4.8 Set 120.300.150 EAN-Code: 4250116891108 Article number: CD 3.6-24 Set 120.300.115 EAN-Code: 4250116890811
CD 4.8 Set Quick Drill CD 3.6-24 LiRating: 4.8 V-1.2 Ah 4.8 V-1.4 AhCharger: 3-5 hour charger 3-5 h hour chargerIdling speed: 150 rpm 150 rpmBattery Spannung: 6 V battery 6 V battery Charge current: 300 mAh 300 mAhCharger: 230 V~50 Hz 230 V~50 HzMounting: Ø 6.35 mm Ø 6.35 mm
Features:3 drill bits1 bit holder2 long bits18 bitsLED charge status indicatorMagnetic holders230 V charger
10
short long
short
short
short
short
long
long
long
long
short
short long
short
short
short
short
long
long
long
long
short
Drilling, screwing
Cordless screwdriver with 120-piece tool set
Powerful and ergonomically balanced cordless screwdriver for working at home, on a site or in the garden. Angled handle makes it particularly practical.For fast screwing and drilling without requiring a mains socket. Battery charger and lots of accessories.
11
CD 4.8-120 SetCordless screwdriver
Article number: 120.300.094 EAN-Code: 4250116801770
Rating: 4.8 V – 1.2 AhCharger: 3-5 h chargerTorque: 23 settings
Features:120-piece accessory set Titanium-coated bitsIn a portable folding plastic case
Grinding, cutting
One-handed angle grinder
AG 900-125Angle grinder
Practical, powerful angle grinder for grinding, cutting, separating and polishing. A comfor-table position can be found for all types of work thanks to the fact that the handle can be fitted on both sides. A flat head makes work in places with difficult access easier. The spindle lock allows the grinding discs to be changed quickly.
Article number: 120.400.084 EAN-Code: 4250116892297
Mains: 230 V~50 HzRating: 900 WSpeed: 11,000 rpmDisque diameter: ø 125 mm
Features:Spindle lockGuide handle can be fitted on the right or leftSafety hoodSpindle thread M14
AG 800-125 Evolution Angle grinder
Article number: 120.400.124 EAN-Code: 425011689411
Mains: 230 V~50 HzRating: 800 WSpeed: 11,000 rpmDisque diameter: ø 125 mm
Features:Aluminum headingMetal transmission headingSpindle lockAddition handle on the right left screwable
AG 500-115Angle grinder
Mains: 230 V~50 HzRating: 500 WSpeed: 11,000 rpmDisque diameter: ø 115 mm
Article number: 120.400.044 EAN-Code: 4250116801961
Features:Spindle lockGuide handle can be fitted on the right or leftSafety hoodSpindle thread M14
12
All models without discs
AG 2200-230 EvolutionAngle grinder
AG 2000 EcoAngle grinder
Article number: 120.400.094 EAN-Code: 4250116892624
Mains: 230 V~50 HzRating: 2,000 WIdling speed: 6,400 rpmDisque diameter: ø 230 mmSoft Start
Features:Metal gearbox headSpindle lockGuide handle can be mounted in 3 positions – right, left or topAdditional handle can be turned through 90° to the right and leftFlange wrench
Article number: 120.400.144 EAN-Code: 4250116894635
Mains: 230 V~50 HzRating: 2200 WSpeed: 6000 rpmDisque diameter: ø 230 mm
Features:Soft start power limiterMetal gearbox headSpindle lockSwivelling handle (90°-rechts-links)addition handle (on the right-left above)Safety hoodSpindle thread M14
AG 1100 EvolutionAngle grinder
Mains: 230 V~50 HzRating: 1100 WSpeed: 11,000 rpmDisque diameter: ø 125 mm
Article number: 120.400.134 EAN-Code: 4250116894628
Features:Metal gearbox headSpindle lock2-hand handleGuide handle can be mounted in 2 positions – right, left Safety hoodSpindle thread M14Aluminium head
Two-handed angle grinders Powerful angle grinder for grinding, cutting, separating and polishing. A comfortable position can be found for all types of work thanks to the fact that the handle can be fitted on three sides. A flat head makes work in places with difficult access easier. The spindle lock allows the grinding discs to be changed quickly.
13
Grinding, cutting
All models without discs
ADS 7.2 Volt- LiLithium-ion battery delta sander
Article number: 120.300.160 EAN-Code: 4250116892235
Battery: Lithium batteries 7.2 Volt – 1,000 mAhIdling speed: 10,000 rpmCharging time: 3-5 hoursCharger: 400 mA, 9 VAbrasive paper: 95 x 135 mm
Features:Including charging stationWall mounting for charging stationLED charge status indicator3 sheets of abrasive paper1 x 120 grit2 x 80 grit
Grinding, smoothing
Delta grinder for fine and coarse grinding work
Battery and 220 V delta grinder for specialist work. For smoothing and grinding wooden surfaces, plastic or metal. An ergonomic handle position and vibration-free operation of the machines mean they do not cause fatigue.
OS 105 DMulti-grinder
Mains: 230 V~50 Hz Rating: 105 WOscillations: 12,000 rpmAbrading area: 140 x 140 x 80 mmAbrasive paper size: 140 x 140 x 80 mm
Article number: 130.200.040 EAN-Code: 4250116891207
Features:Adapter for dust extractionIncluding 1 sheet of abrasive paper
14
OS 300-115Orbital sander
Article number: 130.200.030 EAN-Code: 4250116891085
Mains: 230 V~50 HzRating: 300 WOscillations: 12,000 rpmAbrading area: 225 x 115 mmAbrasive paper size: 280 x 115 mm
Features:Aluminium sanding plateSoft handleAdapter for dust extractionDust bagIncluding 1 sheet of abrasive paper
Article number: 120.300.160 EAN-Code: 4250116892235
Grinding, smoothing
Belt and orbital sanders For smoothing and grinding wood, plastic, metal or painted finishes. Ergonomic handles and vibration-free operation of the machines mean they do not cause fatigue and produce a clean result.
15
BS 800-75/1Belt grinder
Optional accessories:Accessory set2 x grinding belt k40 2 x grinding belt k802 x grinding belt k60 2 x grinding belt k100Article number: 130.410.010
Mains: 230 V~50 HzRating: 730 WIdling speed: 360 rpmGrinding belt size: 760 x 460 mm
Article number: 130.400.020 EAN-Code: 4250116891443
Features:Second handle for working without fatigue Precise belt guideIntegral dust extractionDust bag1 grinding beltBelt tensioning device
OS 135Orbital sander
Article number: 130.200.020 EAN-Code: 4250116891573
Mains: 230 V~50 HzRating: 135 WOscillations: 10,000 rpmAbrading area: 185 x 90 mm
Features:Adapter for dust extractionIncluding 1 sheet of abrasive paper
GES 135Drill/Grinder Set
Article number: 120.600.054 EAN-Code: 4250116892792
Mains: 230 V~50 HzRating: 135 WSpeed: 10,000-35,000 rpmFlexible shaft
Features:40-piece accessory set for cutting, drilling, grinding, engraving, milling, polishing and cleaningFlexible shaftTelescoping standBMC case
Grinding, polishing and engraving
Grinding and engraving set with flexible shaft
The multiple grinder with lots of accessories for grinding, drilling, cutting, polishing and engraving. The precise spindle guide and hardened collect chuck are ideal for producing clean work on wood, stone, glass and metal.The flexible shaft also allows very fine engraving and polishing work to be carried out.
16
Hand-held circular saw and jigsaw
Electric plane and surfacing/thicknessing plane
Moulding machines and masonry channel cutter
Hot air guns and solder guns
Tool sets
Woo
dwor
king
SWISSM [email protected], w w w.swissm.ch
2008
CS 1200-190L CS 1400-190LProfessional hand-held circular saw with laser
Article number: CS 1200-190L 130.600.030 EAN-Code: 4250116800254
Article number: CS 1400-190L 130.600.060 EAN-Code: 4250116893881
Mains: 230 V~50 HzRating: 1,200 W / 1,400 WSpeed: 4,500 rpmCutting depth at 90°: max. 66 mmCutting depth at 45°: 56-58 mmCarbide metal saw blade: ø 190 mmBench: Can be adjusted to an angle of 45°
Features:Laser guideCarbide metal saw blade 190 mm / 24 TParallel stopSocket wrenchDust extractionPivot-mounted bench: 45°
CS 1200-180 PromoHand-held circular saw
Mains: 230 V~50 HzRating: 1,200 WSpeed: 4,500 rpmCutting depth at 90°: 65 mmCutting depth at 45°: 56-58 mmSaw blade: ø 185 mm x 20 x 24 T
Article number: 130.600.020 EAN-Code: 4250116800247
Features:Carbide metal saw blade, 185 mmParallel stopDust extractionPivot-mounted bench: 45°
Figure: CS 1200-190 with laser
Sawing, cutting
Hand-held circular saws with and without laser guide
Lightweight, powerful and ergonomic circular saws with parallel stop, dust extraction and a base plate that can be adjusted to an angle of 45°. The laser display on the CS 1200-190L allows precise free-hand cutting.
18
MRS 850-150Universal saw
Mains: 230 V~50 HzRating: 850 WIdling speed: 500-2,600 rpmCutting heigh: Wood – max. 150 mmStroke height: 30 mm
Features:Electronic controlSoft handleSDS blade mountingMetal gearbox head+ 1,150 mm saw blade for wood+ 1,100 mm saw blade for metal
Article number: 130.700.020 EAN-Code: 4250116800278 Optional accessories:Saw blade set 3 x wood, 2x metalArticle number: 130.710.020
EJS 450-55 Set – jigsaw in case setEJS 450-55 jigsaw
Article number: EJS 450-55-Set 130.100.020 EAN-Code: 4250116800162 Article number: EJS 450-55 130.100.050 EAN-Code: 4250116890910
Mains: 230 V~50 HzRating: 450 WNo. of strokes: 500-3,000 rpmMax. cutting depth: 55 mmAngled cuts: max. 45°
Features:Adjustable bench can be pivoted up to 45° to the left and rightSaw blade roller guideFinger guardIntegral adapter for dust extraction
Case with accessories (EJS 450-55 Set only)
Accessories:Stop angle
Combination pliers
6 mm round file
7 mm firmer chisel
10 mm firmer chisel
Straight slot screwdriver
Philips screwdriver
3 m tape measure
3 joiner’s pencils
70 Spax 3.0x30 mm
60 Spax 3.5x30 mm
40 Spax 4.0x30 mm
3 jigsaw blades for iron
7 jigsaw blade for wood
5 sheets of abrasive paper 2x60, 1x150, 2x320
Sawing, cutting
Commercial jigsaw setUniversal saw
Extensive commercial set with powerful, ergonomic jigsaw for universal use in the home and workshop.
Universal saw, suitable for various materials such as wood, plastic or metal. For cutting wooden beams, boards and branches as well as copper pipes, etc.Ergonomic, simple electrical adjustment.
19
Mains: 230 V~50 HzRating: 610 WStroke rate 0-3000 minCutting depth: Wood max.60 mm Metal max.8 mmAngled cuts: Max 45°Weight: 2,3kg packing
Article number: 130.100.060EAN-Code: 4250116891436
Features:Stroke rate electronic control With electronics and pendulum strokeAdjustable desk to 45°, on the left and on the right Saw blade - roller apronFinger protectionIntegrated adapter for dust extraction1 saw blade
EJS 750 EvolutionJigsaw
Features:Electronic regulationSDS page accommodationAluminum desk with parallel guide stopPendulum stroke control quadrupleSoft grasp2 saw blades for wood1 universal saw blade1 Allen key
Mains: 230 V~50 HzRating: 750 W No. of strokes: 0-3,000 rpmCutting depth: Wood/iron: 80/8mm Plastic – max. 60 mm Metal – max. 8 mmAngled cuts: Max 45°pendulum stroke: 0, 1, 2, 3
EJS 610-60 EvolutionProfessional pendulum-action jigsaw
Jigsaws with and without laser guide
Powerful, ergonomic electronic jigsaw with a pendulum action and adjustable angle base for universal use.
The EJS 600-80L Set includes a precise laser cutting indicator that allows precise free-hand cutting.
20
Sawing, cutting
Article number: 130.100.090 EAN-Code: 4250116894581
EP 1500-204-2 Surfacing/Thicknessing plane
Article number: 230.100.079 EAN-Code: 4250116892761
Features:Surfacing plate bench size: 737 x 210 mmThicknessing plane bench size: 255 x 204 mmNumber of blades: 2Blade shaft diameter: 50 mmHSS planing knivesSurfacing stopAutomatic, uniform workpiece feedThicknessing bench with multiple mountingsThe thicknessing and surfacing benches are made of solid die-cast aluminium, chip discharge hoodIncluding 1 pair of spare bladesIntegral dust extraction with dust bag
Mains: 230 VoltRating: 1,500 WIdling speed-Rating: 8,000 rpmMax. planing width: 204 mmMax. surfacing height: 2 mmMax. clearance heigh: 12 cm
EP 710-82Electric plane
Mains: 230 V~50 HzRating: 710 WSpeed: 16,400 rpmChip depths: 0-3 mmPlaning width: 82 mm
Article number: 130.300.030 EAN-Code: 4250116891061
Features:Carbide metal bladeInfinitely adjustable chip thickness 0-3 mmParallel stopSocket wrenchDrive belt
EP 650-82Electric plane
Article number: 130.300.020 EAN-Code: 4250116891078
Mains: 230 V~50 HzRating: 650 WSpeed: 16,000 rpmChip depths: 0-2 mmPlaning width: 82 mm
Features:Carbide metal bladeInfinitely adjustable chip thickness 0-2 mmSocket wrenchParallel stopSpare drive belt
Electric planeSurfacing/Thicknessing plane
The ergonomic and lightweight electric planes are notable for their smooth operation. The adjustable chip thickness and interchangeable carbide metal blades make for professio-nal joinery results.
Compact, universal surfacing and thicknessing plane for hobby and workshop. The stable, torsion-free metal machine casing provides great strength and almost zero vibration operations. The machine can be converted from a surfacing to a thicknessing plane without needing any tools. Durable universal motor with sturdy belt drive.
21
Surfacing planes, thicknessing planes
R 1050-12-SET/1Router
Article number: 130.500.020 EAN-Code: 4250116800223
Features:Plastic caseSpindle lock for easy changing of the router tools Parallel stopCutting depth adjustmentClamping tool mounting, 8 mmAdapter for dust extractionIncludes 12-piece routing set made of carbide metal
Mains: 230 V~50 HzRating: 1,050 WSpeed: 11,500-28,000 rpmStroke height: 44 mmChip size: ø 8 mmMoulder: ø 45 mm
WLC 1500-150Masonry channel cutter
Article number: 120.500.010 EAN-Code: 4250116890774
Features:Plastic caseAdditional handleSoft start and constant motor powerDepth stop indicatorFast sheet changing systemCutting width presetting with flangesCutting depth adjustmentSafety switchExternal brushesAdapter for dust bag
Mains: 230 V~50 HzRating: 1,500 WSpeed: 8,500 rpmBlade: ø 150 mm / 125 mmCutting depth: 10 – 40 mmCutting width: 8 - 30.5 mm
BJ 850-100Biscuit jointer
Article number: 120.500.020 EAN-Code: 4250116890781
Mains: 230 V~50 HzRating: 850 WSpeed: 11,000 rpmBlade: ø 100 mmCutting depth: 19 mm
Features:Plastic caseAngle adjustmentDepth adjustmentSpacing adjustment
Router, biscuit jointer and masonry channel cutter
This range contains powerful, precise machines for hobby and commercial use for all cutting work in wood, such as cutting oval holes and channels, moulding and making wood joints as well as for cutting slots in masonry.
22
Cutting, slotting
SG 100Soldering gun
Article number: 240.300.024 EAN-Code: 4250116892709
Mains: 230 V~50 HzRating: 100 WTemperature: 500°CHeating time: 12 seconds
Features:2 soldering tips10 g soldering wire10 g soldering greasePlastic case
HG 2000/2 EHot air gun
Article number: 240.300.014 EAN-Code: 4250116892693
Features:Ergonomic handlingPlastic transport case- Including 22 mm reducer nozzle- Paint scraper- Wide jet nozzle- Jetting nozzle
Mains: 230 V~50 HzRating: 2,000 WTemperaturee: Setting 1 - 300° Setting 2 - 600°Air volume: Setting 1 - 300 l/min Setting 2 - 500 l/min
23
Coating removal, deforming, soldering
Hot air gunSoldering gun
This powerful hot air gun with all the necessary accessories is essential for removing paint and coatings and for deforming and welding plastics.
High quality soldering gun with interchangeable tips and integral light for soldering wires and cables, and tin-plating.
3-piece machine set including bits and jigsaw blades
Article number: 511.010.074 EAN-Code: 4250116802012
Consisting of:Cordless screwdriver CD 1818 V - 1.2 Ah 120.300.010Router R 10501,050 W 130.500.022Jigsaw EJS 610-60610 W 130.100.010
Features:Including 10 cuttersIncluding 10 jigsaw blades and 7-piece bit boxPacked in a carton
3-piece machine setin a case
Article number: 511.010.124 EAN-Code: 4250116893409
Consisting of:Hammer drill ED E 800-13800 W 120.100.070Angle grinder AG 900-125 900 W 120.400.080Jig saw EJS 610-60 610 W 130.100.060
Features:Including 10 jigsaw bladesSDS drill bit set and 6 grinding discs
Drilling, screwing, sawing, cutting and grinding
3-piece tool setswith powerful professional machines
This practical tool set makes renovation work at home or in the workshop child’s play.
24
5-piece machine setin a case
3-Part Maschine setHome bau Starter Set
Article number: 511.010.064 EAN-Code: 4250116801855
Article number: 511.010.110 EAN-Code:
Cosisting of:Drill 500 W 120.100.050Jigsaw 350 W 130.100.040Cordless screwdriver 14.4 Volt 120.300.080Orbital sander 135 W 130.200.020Angle grinder 115 500 W 120.400.040including mobile case
Art. Nr: 511-010-110.1 511-010-110Consisting of 120-200-020EHD of 850 electrical drilling hammers, 850 Wattswith 4 drills and 2 chiseis 130-600-050CS 1200-160 portable circular saw 1200 Watts120-400-030 AG 2000-230- Set angle sander 2000W230mm disk diameter, 3 metal
Features:5-piece machine setin a mobile casewith a telescoping handle
NEW
25
Drilling, screwing, sawing, cutting and grinding
5-piece tool setsElectric drill, cordless screwdriver, jigsaw, angle grinder and orbital sander
The ideal machine set in a practical trolley for all mobile DIY work.
DWG 200Double grinder
Article number: 120.600.024 EAN-Code: 4250116892723
Mains: 230 V~50 HzRating: 400 WGrinding disc size: 200 x 20 x 32 mmIdling speed: 2,950 rpm
Features:1 fine grinding disc1 coarse grinding disc2 tool supports2 spark guards
Article number: 120.600.034 EAN-Code: 4250116892648
Features:1 wet grinding disc1 dry grinding discWater bath containerSpark guardTool support
Mains: 230 V~50 HzRating: 400 WWet disc: 200 x 40 x 20 mmDry disc: 150 x 20 x 12.7 mmIdling speed of wet disc: 134 rpmIdling speed of dry disc: 2,950 rpm
DWG 150Double grinder
Article number: 120.600.014 EAN-Code: 4250116892631
Mains: 230 V~50 HzRating: 150 WSpeed: 2,950 rpmDry disc: 50 x 16 x 12.7 mm
Features:1 fine grinding disc1 coarse grinding disc2 tool supportsSpark guard
WDG 150/200Wet & dry grinder
26
Wet & dry grinders
Double grindersfor wet and dry grinding
Compact, powerful double grinder for wet and dry work.Sturdy, compact metal casing with grinding shafts mounted in ball bearings.The powerful motor ensures smooth, non-vibration working and excellent results.
Tile cutters and stone cutting machine
Sawing units
Column drills
Compressors
Paint sprayers
Welding sets
Mac
hine
tool
sCo
mpr
esso
rs SWISSM [email protected], w w w.swissm.ch
2008
Compact tile cutter for private and commercial use
This compact tile cutter is ideal for large scale tiling work at home.The precise, adjustable bench with parallel stop and diagonal stop allows floor and wall tiles to be cut precisely and cleanly.The high speed diamond disc runs in a water bath to ensure that the cutting work generates virtually no dust.
TCM 600-180Tile cutter
Optional accessories: Diamond cutting disc 180 x 22,2Article number: 110.110.010
Mains: 230 V~50 HzRating: 600 W – S2Speed: 3,000 rpmCutting heigh: 35 mmBench size: 330 x 360 mmDiamant disc: 180 x 22.2 mm
Article number: 110.100.010 EAN-Code: 4250116800025
Features:Diamond disc: 180 mmParallel stopPivot-mounted bench
28
Cutting tiles and natural stone
SSCM 1500-250Stone cutting machine
Optional accessories: Diamond cutting disc 250 x 25.4 mm
Mains: 230 V~50 HzRating: 1,500 W S2Speed: 3,000 rpmCutting depth: 65 mm at 90° 48 mm at 45°Cutting lenght: 570 mmBench size: 960 x 530 mmDiamant disc: 250 x 25.4 mmCutting angle: 0-45°
Article number: 110.200.040 EAN-Code: 4250116892907
Features:Steel bench with rubber coatingAluminium guideSturdy sub-frameMotor mounted in four ball bearingsAttachable sub-frameIntegral water pumpMotor can be pivoted infinitely from 0°-45°Integral transit guards
29
Cutting tiles and natural stone Cutting tiles and natural stone
Professional tile and stone cutting machines for commercial use
Compact, transportable tile and stone cutting machines for longitudinal, mitre, double mitre and jolly cuts. Sturdy, textured bench with workpiece stop and adjustable angle stop. Motor carriage mounted in four ball bearings with replaceable diamond cutting disc. The precision mounting of the motor and the integral water bath with coolant pump makes precision cutting with clean results and virtually no dust possible.These cutting machines are suitable for all stone and tile work, such as:Cutting kerbstones, foundation slabs, steps, tiles made of natural and synthetic stone as well as ceramic tiles.
SSCM 800-200-3 SSCM 600-180-1Stone cutting machine
Optional accessories:Diamond cutting disc: 200x25.4 mm (SSCM 800-200-1) Article number: 110.210.010 Diamond cutting disc: 180x25.4 mm (SSCM 600-200-1)
Article number: SSCM 800-200-3 110.200.021 EAN-Code: 4250116893430
Article number: SSCM 600-180-1 110.200.030 EAN-Code: 4250116892891
Features:Steel bench with rubber coatingAluminium guideSturdy sub-frameMotor mounted in four ball bearings Attachable sub-frame Large water capacityIntegral water pumpMotor can be pivoted infinitely from 0°-45°Integral transit guardsFoot level adjustment
SSCM 800-200-3 SSCM 600-180-1Mains: 230 V~50 Hz 230 V~50 HzRating: 800 W 600 WSpeed: 2,950 rpm 3,000 rpmCutting depth: 30 mm at 90° 25 mm at 90° 25 mm at 45° 17 mm at 45°Cutting lenghth: 560 mm 460 mmWorking height: 690 mm 690 mmBench size: 830 x 430 mm 730 x 410 mmDiamant disc: 200 x 25.4 mm 180 x 25.4 mmCutting angle: 0°-45° 0°-45°
Mains: 230 V~50 HzRating: 1,200 WIdling speed: 4,500 rpmCarbide metal saw blade: Ø 210 x Ø 18 x1.6 mmCutting angle: 3 x 45°Cutting capacity: at 90°: 130 x 54 mm at 45°: 90 x 54 mm at 2x45°: 90 x 40 mm
Article number: 210.200.140 EAN-Code: 42501168091658
Features:Laser guideCarbide metal saw blade – 24 TTurntable with precision angle adjustment from –45° to +45°Sawing head can be pivoted to the left from 0° to 45°Locking position at 15°, 22,5°, 30°, 45°, 90°Bag for chips
30
Crosscutting
Precision drag, crosscut and mitre saw with double shaft design and belt drive
Well-designed, multi-functional drag, crosscut/mitre saw with sturdy double shaft drag moun-ting. This machine contains all the functions of a professional commercial machine. Turntable with angle adjustment – double guide for precise drag cuts – turning handle for a wide range of working positions – Motor-protecting, sturdy belt drive – Double laser cutting guide – Saw blade angle to the left and right, 2 x 45° - Stop extension – Vice with fast-action spindle.
MS 1200-210L/1Crosscut and mitre saw with laser guide
Article number: SMS 1400-216 210.200.133 EAN-Code: 4250116892020
Article number: SMS 2000-250-350 210.200.210 EAN-Code: 4250116892037
SMS 1400-216 SMS 2000-250-350Mains: 230 V~50 Hz 230 V~50 HzRating: 1,400 W 2,000 WIdling speed: 4,500 rpm 4,500 rpmCarbide metal saw blade: ø 210 x 30 x 2,5mm ø 250 x 30 x 2.5mmCutting angle: 0° x 45° 0° x 45°Cutting capacity: at 0°/90° 310 x 65mm 340 x 60mm at 0°/45° 310 x 30mm 340 x 42mm Cutting length: 310 mm 335 mm
Features SMS 1400-216:Carbide metal saw blade 210 mm – 24 TTurntable with precision angle adjustment from –55° to +55°Sawing head can be pivoted to the left from 0° to 45°Bag for chipsBench made of die-cast aluminiumExtra long drag with 310 mm cutting length
Features SMS 2000-250-350:Carbide metal saw blade 250 mm – 30 TTurntable with precision angle adjustment from –55° to +55°Sawing head can be pivoted to the left from 0° to 45°Bag for chipsBench made of die-cast aluminiumExtra long drag with 335 mm cutting length
SMS 1400-216 SMS 2000-250-350Drag crosscut and mitre saws with laser guide
SMS 2000-250-LV SMS 2000-250-block guideDrag/crosscut and mitre saws
Article number: SMS 2000-250-LV 210.200.170 EAN-Code: 4250116891986
Article number: SMS 2000-250-Block 210.200.190 EAN-Code: 4250116892006
Features of the SMS 1400-216:Carbide metal saw blade 210 mm – 24 TTurntable with precision angle adjustment from –55° to +55°Sawing head can be pivoted to the left from 0° to 45°Bag for chipsBench made of die-cast aluminiumExtra long drag with 310 mm cutting length
Features of the SMS 2000-250-350:Carbide metal saw blade 250 mm – 30 TTurntable with precision angle adjustment from –55° to +55°Sawing head can be pivoted to the left from 0° to 45°Bag for chipsBench made of die-cast aluminiumExtra long drag with 335 mm cutting length
SMS 2000-250-LV SMS 2000-250-BlockMains: 230 V ~ 50 Hz 230 V~50 HzRating: 2,000 W 2,000 WCarbide metal saw blade: Ø 250 x 30 x 2.5 mm/36T Ø 250 x 30 x 3.2mm/36TIdling speed: 4,500 rpm 4,500 rpmCutting depth: 0°/90° 510 x 70 mm 300 x 75 mm 45°/90° 360 x 70 mm 210 x 75 mm 0°/45° 510 x 40 mm 300 x 45 mm 45°/45° 360 x 40 mm 210 x 45 mm
With precision block guide
Crosscutting
31
Crosscutting
Precision drag, crosscut and mitre saws with belt drive or double shaft design
Sturdy, multi-functional drag, crosscut and mitre saw with precise aluminium machine bed and double shaft parallel drag guide.Turntable with angle adjustment, saw blade pivots to the left and right, 2 x 45° workpiece support and vice for the safe, clean cutting of wood, metal and plastic.
SMS 2000-305-belt driveDrag crosscut and mitre saw
Article number: 210.200.200 EAN-Code: 4250116892013
Mains: 230 V ~ 50 HzRating: 2,000 W belt driveCarbide metal saw blade: ø 305 x 30 x 3.2mm/36TIdling speed: 3,500 rpmCutting angle: 2 x 0° x 45°Cutting capacity: at 0°/90° 340 x 100 mm at 45°/90° 240 x 100 mm at 0°/45° 340 x 43 mm at 45°/45° 240 x 43 mm
Features:Carbide metal saw blade 305 mm – 32 teethTurntable with precision angle adjustment from –55° to +55°Sawing head can be pivoted to the left and right from 0° to 45°Bag for chipsBench made of die-cast aluminium2 bench extensions1 workpiece clampTurning handle for four positionsDouble laser guideFast-action clamp functionBelt drive – precise and accurateFast fixing
TS 800-200Bench circular saw
Article number: 210.100.050 EAN-Code: 4250116801350
Features:Parallel stop / Angle stop
Mains: 230 Volt~50 HzRating: 800 WLehrlaufdrehzahl: 2,950 rpmMax. Cutting depth: 40 mmBench size: 500 x 335 mmSaw blade: Ø 200 x 16 mm 20 teeth
Article number: 210.100.010 EAN-Code: 4250116800353
TS 1000-205Bench circular saw
Mains: 230 V~50 HzRating: 1,000 WIdling speed: 2,950 rpmBench size: 513 x 400 mm (600)Saw blade: Ø 205 x 16 x 2.5 mmTeeth: 20Cutting depth: at 90° - 43 mm at 45° - 36 mm
32
Universal bench circular saws These compact bench circular saws are suitable for all normal sawing work in a workshop or on a building site. Compact and mobile, they are easy to transport in the case and can be made ready for action in a trice.
Sawing
Article number: 220.100.011 EAN-Code: 4250116891962
TST 1500-250/1Bench circular saw with underfloor bench
Features:Die-cast aluminium benchCarbide metal saw blade 250 mm - 36 teethSaw blade angle can be infinitely adjustedSaw blade height can be infinitely adjustedParallel stop with 2 stop heightsLateral stop and mitre stopBench size without extensions: 460 x 625mmBench size with extensions: 625 mm x 925 mm
Mains: 230 V~50 HzRating: 1,500 W-S6Speed: 4,000 rpmSaw blade: Ø 250 x 30 x 3.2 mmMax. cutting height.: 90°: 76 mm, 45°: 60 mmSaw blade height adjustment: Infinite 0-76 mmCutting angle: 0°-45°Bench size: 460 mm x 625 mmBench height: 902 mm
Article number: 230.100.040 EAN-Code: 4250116801640
MUTS 1700-210Bench circular saw with underfloor drag
Features:Underfloor dragTextured benchCarbide metal saw blade 210 mm - 26 teethParallel longitudinal stopHeight adjustmentPivots through 45°Scale in millimetresEmergency stop safety switchAdapter for dust extraction including hoseSub-frame
Mains: 230 V~50 HzRating: 1,700 W S6-40%Carbide metal saw blade: Ø 210 x 30 x 2.8Idling speed: 4,300 rpmCutting depth: 0°/90° – 62 mm 0°/45° – 40 mmDrag length: 210 mmBench size: 661 mm x 608 mmBench height: ca. 900 mm
Sawing
33
Bench circular saws
Compact, precise and universal bench circular saw for normal sawing work with parallel stop and angle stop.
MUTS 1700-210Underfloor drag device for sawing a stationary workpiece.
Sawing
34
Duo-CutCrosscut bench circular saw with sub-frame
Article number: 210.200.160 EAN-Code: 4250116891863
Features:Die-cast aluminium benchFour feet, attachableParallel and angle stopEmergency power safety switchDust bagHeight and angle adjustment
Combination bench circular saw/ crosscut and mitre saw
2-in-1, combination machine for circular and crosscut sawing.Simple adjusting the saw bench creates a full bench circular saw or a convenient crosscut and mitre saw with all the benefits of a solo machine. This compact, easy to transport machine is perfect for site assembly work.
Sawing, crosscutting, mitre sawing
Mains: 230 V~50 HzRating: 1,800 WCarbide metal saw blade: Ø 250 x 30 x 3.2 mm 36 teethIdling speed: 4,500 rpmBench size: 510 x 470 mmBench circular saw cutting depth: 90° – 65 mm 45° – 40 mmCrosscut and mitre saw cutting depth: 0°/90° – 130 x 65 mm 45°/90° – 90 x 65 mm 0°/45° – 130 x 40 mm 45°/45° – 90 x 40 mm
BS 250 BS 350Band saw
BS 250 BS 350Mains: 230 V~50 Hz 230 V~50 HzRating: 250 W 350 WMax. cutting depth: 40 mm 80 mmMax. cutting width: 150 mm 190 mmBench size: 240 x 200 mm 300 x 300 mmBend length: 1,085 mm 1,425 mmBend width: 3.5 mm 6.35 mm
Article number: BS 250 130.300.110 EAN-Code: 4250116893041
Article number: BS 350 130.300.100 EAN-Code: 4250116892938
Features:Solid metal casingAluminium benchAluminium parallel stopsSaw bench can be angled from 0-45°3-point roller saw band guide
Sawing
Band saws for wood and metal The wood band saws in the BS series are notable for their precise 3-roller saw band guide and a solid, pivot-mounted aluminium saw bench with longitudinal and angle stop.Their smooth, low noise action makes them ideal for sawing in hobby rooms.
Sturdy, compact metal bow saw for workshops and installation contractors.Precise saw band guide using simple saw band clamp adjustment, heavy duty machine vice and base frame.
MCS 400Metal band saw
Article number: 190.100.050 EAN-Code: 4250116892921
Features:Automatic cut-outLongitudinal stopSturdy sub-frameClampSafety switchPivot-mounted head 0-45°Adjustable saw blade guide
Mains: 230 V~50 HzRating: 400 WSpeed: 1,450 rpmBend length: 1,300 mmBend width: 12.5 mm Max. cutting depth: 90° round material 90 mm 90° square material 85 x 85 mm 45° round material 40 mm 45° square material 38 x 38 mm
Sawing, crosscutting, mitre sawing
35
36
Crosscutting
Metal crosscut saw Powerful, safe crosscut saw with high torque and low speed.The perfect saw for building sites and workshops for cutting a wide range of metal sections, band steel, pipes, etc.Safe to use with adjustable vice and cutting disc safety cover.
MMS 2000Metal crosscut saw
Article number: 190.100.020 EAN-Code: 4250116892822
Features:Spindle lockMachine vice with fast adjustmentDepth stopDust extraction
Mains: 230 V~50 HzRating: 2,000 WSpeed: 3,900 rpmMitre cut: 0-45°Saw thickness: 100 mm in diameterSaw width for square material: 70 x 170 mm
DP 350-13 DP 500-16Column drills
Article number: DP 350-13 120.600.100 EAN-Code: 4250116892914
Article number: DP 500-16 120.600.110 EAN-Code: 4250116893034
Features:5 drilling speedsChuck guardDepth stopPowerful motor
DP 350-13 DP 500-16Mains: 230 V~50 Hz 230 V~50 HzRating: 350 W 500 WDrilling capacity: Ø 13 mm Ø 16 mmSpindle: MT2 MT2Spindle deflection: 46 mm 46 mmSpeed: 5/580-2,650 rpm 9/280-2,350 rpmMax. spindle shaft/head distance 104 mm 115 mmBench size: 160 x 160 mm 170 x 170 mmBase size: 314 x 200 mm 320 x 198 mm
SB 400 SB 600Column drills
Article number: SB 400 120.600.120 EAN-Code: 4250116893751
Article number: SB 600 120.600.130 EAN-Code: 4250116893768
SB 400 SB 600Mains: 230 V~50 Hz 230 V~50 HzRating: 350 W 500 WDrilling capacity: Ø 13 mm Ø 16 mmSpindle: MT2 MT2Spindle deflection: 50 mm 60 mmSpeed: 5/580-2650 rpm 12/425-2545 rpm 5/760-3100 rpm 12/510-3140 rpmMax. spindle shaft/head distance 102 mm 126 mmBench size: 152 x 170 mm 200 x 200 mmBase size: 320 x 190 mm 380 x 250 mm
Column drills High quality, powerful column drills for drilling a wide range of materials. Easy to use. Reliab-le and durable with a powerful motor and 3-way belt drive to set a wide range of speeds. The height-adjustable drilling bench, hinged transparent drilling guard and sturdy metal stand ticks all the boxes.
37
Drilling
Crosscutting
Metal crosscut saw Powerful, safe crosscut saw with high torque and low speed.The perfect saw for building sites and workshops for cutting a wide range of metal sections, band steel, pipes, etc.Safe to use with adjustable vice and cutting disc safety cover.
MMS 2000Metal crosscut saw
Article number: 190.100.020 EAN-Code: 4250116892822
Features:Spindle lockMachine vice with fast adjustmentDepth stopDust extraction
Mains: 230 V~50 HzRating: 2,000 WSpeed: 3,900 rpmMitre cut: 0-45°Saw thickness: 100 mm in diameterSaw width for square material: 70 x 170 mm
Spraying, blowing, grinding, screwing, drilling
Compressor set for universal use
Compact mobile compressed air compressors for all conventional pneumatic tools such as spray guns, hammer-action screwdrivers, nail guns, tyre inflators and much more.Long life motor with aluminium compressor unit, effective air cooling to relieve the strain on the motor, sturdy steel tank with condensation drain, pressure reducer with pressure gauge and standard compressed air connector.
AC 2000-25Compressor (induction motor)
Article number: 240.100.010 EAN-Code: 4250116802029
Mains: 230 V~50 HzMotor rating: 1,500 W – 2 PSIntake capacity: 200 l / min.Max. pressure: 8 barIdling speed: 2,850 rpmTank capacity: 24 litres
Features:Pressure controllerPressure gauge2 pressure connectorsMobileSafety valve
38
AC 2000-25-2 Compressor (universal motor)
Article number: 240.100.011 EAN-Code: 4250116891900
Mains: 230 V~50 HzMotor rating: 1,500 W – 2 PSMotor: Universal motorIntake capacity: 200 l / min.Max. pressure: 8 barIdling speed: 2,850 rpmTank capacity: 24 litres
Features:Tank capacity: 24 litresIntake capacity 206 litres / min.with pressure reducerPressure gauge2 quick-action connectorsCoupling
Spraying, blowing, grinding, screwing, drilling
Compressor set for universal use
Compact module compressed air compressor for all conventional pneumatic tools. Including tool set with spray gun, blow gun, tyre inflator and spiral extension hose.Long life motor with aluminium compressor unit, effective air cooling to relieve the strain on the motor, sturdy steel tank with condensation drain, pressure reducer with pressure gauge and standard compressed air connector to meet high workshop demands.
39
AC 2100-50 Compressor
Mains: 230 V~50 HzMotor Rating: 1,500 W – 2 PSIntake capacity: 210 l / min.Max. pressure: 8 barIdling speed: 2,850 rpmTank capacity: 50 litres
Article number: 240.100.030 EAN-Code: 4250116802043
Features:Pressure controllerPressure gauge2 pressure connectorsMobileSafety valve
AC 12Car Tyre Inflator
Technical data:-Power supply with 12 V cigarette lighter socket-Operting Pressure max 18 bar-Air capacity max 4,5 l/min-Weight: 0,7 kg-Packing dimension 165 x 80 x 145 mm
Article number: 240.1000.54 EAN-Code: 4250116893089
Features:Pressure gauge 0 to 18 barr2,9 m connection cable (12 V) with cigarette lighter socketAir hose with quick locking-valve3 pcs spare adapters (water ball-, air bed-, ball adapter)
5-piece pneumatic tool set Article number: 180.200.010 EAN-Code: 4250116890699
Compressed air hose
Article number: 180.200.011 EAN-Code: 4250116893898
Compressed air hose
Article number: 180.200.012 EAN-Code: 4250116893904
Blowing gunArticle number: 180.200.013 EAN-Code: 4250116893911
Tyre inflators Article number: 180.200.014EAN-Code: 4250116893928
Sand-blasting gunsArticle number: 180.200.015EAN-Code: 4250116893835
Underseal gunsArticle number: 180.200.016EAN-Code: 4250116893842
Ratchet screwdriver setArticle number: 180.200.034EAN-Code: 4250116893959
Hammer-action screwdriver setArticle number: 180.200.044EAN-Code: 4250116893966
Hammer-action chisel setArticle number: 180.200.054EAN-Code: 4250116893973
Spraying, blowing, grinding, screwing, drilling
Professional compressor accessories
We specialise in universal DIY and commercial compressors and offer an extensive range of accessories for all the compressor tools needed at home, for hobbies and by tradesmen.
40
10 m 5 m PU
CP 450Paint spray unit
Article number: 240.100.040 EAN-Code: 4250116802050
Mains: 230 VRating: 450 WAir intake capacity: 1,500 l / min.Operating pressure: 0.15 bar
Features:Compressor with adjustable spray gunHose length: 1.5 mGun: 1 lIncludes viscosimeterAdapter with connectors for inflating boats and balls.Carry strap
Underseal gunsArticle number: 180.200.016EAN-Code: 4250116893842
Hammer-action chisel setArticle number: 180.200.054EAN-Code: 4250116893973
Painting, glazing
Painting set Practical painting set with quiet compact compressor and ergonomic paint spray gun with adjustable nozzle. The high performance compressor guarantees an excellent spraying result thanks to its large air volume.The set contains a viscosimeter and an extension hose for the spray gun to ensure outstan-ding results.
41
Welding
Electric welding sets
EWS 200Combination welding set
Compact electric welding sets for manual arc welding for use at home, in garages and workshops. The high performance transformer with cooling fan provides a long duty cycle and a steady arc. The infinite welding current regulation with optical display of the electrode thickness relative to the current strength means that even beginners can produce perfect welding results.
Article number: 170.100.010 EAN-Code: 4250116800971
Mains: 230 V/400 V~50 HzWelding current: 60 – 200 AInsulation class: H-IP21Duty cycle: 10 % EDElectrodes: 1.5 – 4 mmIdling voltage: 48 V
Features:MobileInfinitely adjustable welding currentElectrodes from 1.5 – 4 mmCan be switched from 230 V to 400 VFan coolingEarth cableElectrode cable and holderWelding shield, hammer and brush
EWS 160Electric welding set
Article number: 170.100.050 EAN-Code: 4250116892976
Mains: 230 V~50 HzWelding current: 45 – 160 AInsulation class: H-IP21Duty cycle: 10 % EDElectrodes: 1.6 – 3.25 mmIdling voltage: 48 V
Features:PortableInfinitely adjustable from 45 – 160 AEarth cableElectrode cable with holderFan coolingWelding shield, hammer and brush
EWS 150Electric welding set
Mains: 230 V~50 HzWelding current: 45 – 100 AInsulation class: H - IP21Duty cycle: 10 % EDElectrodes: 1.6 – 2.5 mmIdling voltage: 48 V
Article number: 170.100.020 EAN-Code: 4250116801596
Features:PortableInfinitely adjustable from 45 – 100 AEarth cableElectrode cable with holderFan coolingWelding shield, hammer and brush
42
Welding
MIG-MAG welding sets,inverters
Compact shielding gas welding sets for arc welding for use at home, in garages and work-shops. The high performance transformer with cooling fan provides a long duty cycle and a steady arc. The precisely adjustable wire feed ensures uniformed welds and good welding quality.
43
MAG 140Shielding gas welding set
Mains: 230 V~50 HzWelding current: 36-120 AInsulation class: HProtection type: IP21Welding wire thickness: 0.6-0.8 mmIdling voltage: 34 V
Article number: 170.200.050 EAN-Code: 4250116893652
Features:Sturdy sheet steel casing with rubber impact guardWelding current adjustmentLevel settingAdjustable wire feedWelding electrode cableWelding shield, hammer and brush
MIG-MAG 160Shielding gas welding set
Article number: 170.200.030 EAN-Code: 4250116893621
Features:Sturdy sheet steel casing with rubber impact guardWelding current adjustmentLevel settingAdjustable wire feedFan coolingMobile with 2 wheelsWelding electrode cableWelding shield, hammer and brush
MIG-MAG 200Shielding gas welding set
Mains: 230 V-400 V~50 HzWelding current: 65-200 AInsulation class: HProtection type: IP21Welding wire thickness: 0.6-1.2 mmIdling voltage: 36.5 V
Article number: 170.200.040 EAN-Code: 4250116893638
Features:Sturdy sheet steel casing 5 welding settingsVariable wire feedFan coolingRemovable hose packageWelding electrode cableWelding shield, hammer and brush
EWS 250 - 230/ 400 V
Rated Input Voltage 230V/400V 1ph/50HzNo -load Voltage 50 V Input Capacity 14KVA Current Range 65-250Protection Class IP 21Insulation Class H
Article number: EWS 250
Features:Cooling FanWelding cableWelding shieldhammer and brushElectrode TorcProtective Mask
Mains: 230 V~50 HzWelding current: 60-140 AFuse: 10 AInsulation class: HProtection type: IP21Welding wire thickness: 0.5-0.8 mmIdling voltage: 35 V
Generators with alternating current
Hoist
Pressure washers
Wet & dry vacuum cleaners
Gene
rato
rs / H
oist
Pres
sure
was
hers
/ Wet
& dr
y vac
uum
clea
ners
SWISSM [email protected], w w w.swissm.ch
2008
Power generation
Petrol synchronous generator Compact generator to generator 230 V alternating current. Economical petrol engine with effective air cooling provides reliability, requires no maintenance and generates electricity in the event of a power failure.The reliable power source for holiday homes and summerhouses, for camping and on boats – in fact anywhere without a power supply.
PG 810Generator
Voltage (output): 230 V~50 HzMax. rating: 800 WPermanent rating: 650 WEngine type: 2-stroke air-cooledMax. engine power: 2 PSIdling speed 3,600 rpmDisplacement: 63 ccTank capacity: 4.2 lFuel typ: 1:50 Weight: 24.5 kgGenerator mode: Synchronous
Article number: 160.100.114 EAN-Code: 4250116800346
Features:1 x 230 V socketOverload switchChokeCarry handleStart with pull-cord
45
PG 3010 and PG 2200Generator
PG 3010 PG 2200Voltage (output): 230 V~50 Hz 230 V~50 HzMax. rating: 2,800 W 2,200 WPermanent rating: 2,500 W 2000 WMax. engine power: 6.5 bhp 5.5 bhpIdling speed: 3,600 rpm 3,000 rpmTank capacity: 15 l 15 lGenerator mode: Synchronous SynchronousEngine type: 4-stroke 4-stroke air-cooled air-cooledConsumption/h: 2.15 lOil capacity: 0.6 l
Article number: PG 3010 160.100.124 EAN-Code: 4250116891771
Article number: PG 2200 160.100.105
Features:Overload protection2 x 230 V socketsLow oil guardTank indicatorVoltmeterMobile (PG 3000F only)
46
Petrol synchronous generators Compact generators to generator 230 V alternating current. Economical petrol engines with effective air cooling provide reliability, require no maintenance and generate electricity in the event of a power failure.The reliable power source for holiday homes and summerhouses, for camping and on boats – in fact anywhere without a power supply.
Power generation
47
StromerzeugungPower generation
Petrol synchronous generator Compact generator to generate 12 V direct current, 230 V alternating current and 400 V heavy current. Economical petrol engine with effective air cooling provides reliability, requires no maintenance and generates electricity in the event of a power failure.The reliable power source for holiday homes and summerhouses, for camping and on boats – in fact anywhere without a power supply.Electric starter ensures that the generator starts easily.
PG 5510Generator
Voltage (output): 230 V~50 HzMax. rating: 5,500 WPermanent rating: 5,000 WMax. engine power: 13 bhpIdling speed: 3,600 rpmTank capacity: 25 lGenerator mode: SynchronousEngine type: 4-stroke air-cooledConsumption/h: 2.95 lOil capacity: 1.1 l
Article number: 160.100.134 EAN-Code: 4250116891504
Features:Overload protection2 x 230 V sockets1 x 400 V socketLow oil guardTank indicatorElectric startVoltmeterMobile
Includes 12 V batteryIncludes 12 V output
EH 1600/1000Hoist
Article number: 140.100.030 EAN-Code: 4250116892679
Features:Safety control switch with immediate stopSecured with two double clipsReturn roller with load hookMotor with thermal switch
EH 900-500Hoist
Article number: 140.100.020 EAN-Code: 4250116800308
Features:Safety control switch with immediate stopAutomatic brake (Secure the weight at any height)Motor with thermal switchReturn rollers with load holder and additional safety spring hook
EH 500-250Hoist
Article number: 140.100.010EAN-Code: 4250116800292
Features:Safety control switch with immediate stopAutomatic brake (Secure the weight at any height)Motor with thermal switchReturn rollers with load holder and additional safety spring hook
Rating: 500 WLifting capacity: 100 kg without return roller 200 kg with return rollerLifting height: 12 m without return roller 6 m with return rollerSteel cable: ø 4 mmSteel cable length: 12 m
Rating: 1,000 WLifting capacity: 250 kg without return roller 500 kg with return rollerLifting height: 12 m with return roller 6 m without return rollerSteel cable: ø 4 mmSteel cable length: 12 m
Mains: 230 V~50 HzRating: 1600 WTragkraft: 500 kg without return roller 1,000 kg with return rollerLifting height: 12 m without return roller 6 m with return rollerCable speed: 10 m/min without return roller 5 m/min with return roller
48
Electric hoists Powerful, compact winches for universal use on sites, in workshops and in garages. High safety standard using remote control with EMERGENCY STOP, a powerful motor, large brake to secure the load at any height and automatic limit switch with mechanical IMMEDIATE STOP.Increased safety:No uncontrolled turning of the elevated load since the steel cables are “non-rotating”.
Lifting
EH 1600/1000Hoist
Article number: 140.100.030 EAN-Code: 4250116892679
Features:Safety control switch with immediate stopSecured with two double clipsReturn roller with load hookMotor with thermal switch
EH 900-500Hoist
Article number: 140.100.020 EAN-Code: 4250116800308
Features:Safety control switch with immediate stopAutomatic brake (Secure the weight at any height)Motor with thermal switchReturn rollers with load holder and additional safety spring hook
EH 500-250Hoist
Article number: 140.100.010EAN-Code: 4250116800292
Features:Safety control switch with immediate stopAutomatic brake (Secure the weight at any height)Motor with thermal switchReturn rollers with load holder and additional safety spring hook
Rating: 500 WLifting capacity: 100 kg without return roller 200 kg with return rollerLifting height: 12 m without return roller 6 m with return rollerSteel cable: ø 4 mmSteel cable length: 12 m
Rating: 1,000 WLifting capacity: 250 kg without return roller 500 kg with return rollerLifting height: 12 m with return roller 6 m without return rollerSteel cable: ø 4 mmSteel cable length: 12 m
Mains: 230 V~50 HzRating: 1600 WTragkraft: 500 kg without return roller 1,000 kg with return rollerLifting height: 12 m without return roller 6 m with return rollerCable speed: 10 m/min without return roller 5 m/min with return roller
49
Pressure washing
Powerful pressure washers Portable/mobile compact and very powerful units for cleaning a very wide range of surfaces. For washing cars, cleaning facade, preparing for coatings and removing dirt from places with difficult access. High performance for cleanliness and hygiene at home, in the garage, in workshops and for agriculture.Complete with high pressure hose and detergent tank.
HPC 1850-160Pressure washer
Mains: 230 V~50 HzRating: 1,850 WOperating pressure: 90 bar, max. 160 bar
Water capacity: 6 l / min.
Article number: 150.200.054 EAN-Code: 4250116891559
Features:3-cylinder steel pumpRoll-up pressure hose, 5 mSpray lance with adjustable nozzleAuto-StopUniversal motorMobileMixing tank
HPC 1400-120Pressure washer
Article number: 150.200.044 EAN-Code: 4250116891467
Features:Universal motorSteel pumpPressure hose, 5 mLance with adjustable nozzleMixing tank
Mains: 230 V~50 HzRating: 1,400 WOperating pressure: 70 bar up to max. 120 barWater capacity: 5 l / min
HPC 2200-160 HPC 1800-180Pressure washer
HPC 2200-160 HPC 1800-180Motor: Universal motor Induction motorMains: 230 V~50 Hz 230 V~50 HzRating: 2,200 W 1,900 WOperating pressure: 110 bar 110 bar up to max. 160 bar up to max. 160 barWater capacity 6l/min 6l/min
Article number: HPC 2200-160 150.200.034 EAN-Code: 4043722000077
Article number: HPC 1800-180 150.200.024 EAN-Code: 4250116801541
Features HPC 2200-160:3-cylinder steel pumpUniversal motorPressure hose, 5mSpray lance with adjustable nozzleMobileMixing tankAutomatic cut-outFeatures of HPC 1800-180:3-cylinder steel pumpInduction motorPressure hose, 5mSpray lance with adjustable nozzleMobileMixing tankAutomatic cut-out
Pressure washing
Powerful pressure washers Portable/mobile compact and very powerful units for cleaning a very wide range of surfaces. For washing cars, cleaning facade, preparing for coatings and removing dirt from places with difficult access. High performance for cleanliness and hygiene at home, in the garage, in workshops and for agriculture.Complete with high pressure hose and detergent tank.
50
WDCN 1000-15-L15L Vacuum cleaner
Article number: 150.100.174 EAN-Code: 4250116895021
Features:three pieces pipelong-squae nozzleshort nozledust paper bagsponge filterFlxible hose: 1.5 m
Mains: 230 V~50 HzRating: 1,000 WWater column: 1,500 mmTank: 15 lCabel 4MCase NIROVacuum Rate >=14KPa
VC 1250-20L VC 1400-20LWet & dry vacuum cleaners
Article number: VC 1250-20L 150.100.104 EAN-Code: 4250116893119
Article number: VC 1400-20L 150.100.114 EAN-Code: 4250116893126
Features:1 combination brush for carpets and smooth flooring1 crevice nozzle, 1 wet filter1 dirt bag1.5 m hose, 36 mm4 wheels2 extension tubesSuck/blow function switchover point
VC 1250-20L VC 1400-20LMains: 230 V~50 Hz 230 V~50 HzRating: 1,250 W 1,400 WCapacity: 20 l 20 lSuction capacity: >=16,5 KPa >=18 KPaTank: Stainless steel Stainless steelCable: 4 m 4 m
Universal wet & dry vacuum cleaner with outstanding suction power and a functional design
Compact, powerful industrial vacuum cleaners with anti-tipping chassis, durable motor with suck and blow function and practical accessories.
51
Wet & dry vacuuming
VCW 1250-20LWet & dry vacuum cleaners
Mains: 230 V~50 HzRating: 1,250 WCapacity: 29 lSuction capacity: >= 16.5 KPaTank: Stainless steelCable: 4 mMulti-function chassis with two castors
Article number: 150.100.124 EAN-Code: 4250116893133
Features:Dual function combination brush for carpetsand smooth flooring1 crevice nozzle1 wet filter1.5 m hose, 36 mm1 long life pleated filter1 telescopic suction tubeSuck/blow function switchover point
VCW 1400-30L VCW 1400-30L EWet & dry vacuum cleaners
Article number: VCW 1400-30L 150.100.134 EAN-Code: 4250116893140
Article number: VCW 1400-30L E 150.100.144 EAN-Code: 4250116893157
Features:Dual function combination brush for carpets and smooth flooring1 crevice nozzle, 1 wet filter1.5 m hose, 36 mm1 long life pleated filter1 stainless steel telescopic suction tubeSuck/blow function switchover point
VCW 1400-30L VCW 1400-30L EMains: 230 V~50 Hz 230 V~50 HzRating: 1,400 W 1,400 WCapacity: 30 l 30 lSuction capacity: >=18 KPa >=18 KPaTank: Stainless steel Stainless steelCable: 4 m 4 mElectric socket: No Yes Multi-function chassis: Yes Yes2 castors: Yes Yes
VCW 1400-50L EWet & dry vacuum cleaners
Mains: 230 V~50 HzRating: 1,400 WCapacity: 50 lSuction capacity: >= 18 KPaTank: Stainless steelCable: 4 mMulti-function chassis with two castors
Article number: 150.100.124 EAN-Code: 4250116893133
Features:Dual function combination brush for carpetsand smooth flooring1 crevice nozzle1 wet filter1.5 m hose, 36 mm1 long life pleated filter1 telescopic suction tubeSuck/blow function switchover pointElectric socket with slow-down functionWater drain valve
Wet & dry vacuuming
Universal wet & dry vacuum cleaner with outstanding suction power and a functional design
Compact, powerful industrial vacuum cleaners with anti-tipping chassis, durable motor, with suck and blow function and practical accessories.
52
VCW 1400-30L E - with Synchro socket
Trimmer and motor scythe
Electric lawn mower and electric cultivator
Cordless grass shears
Electric and petrol hedge cutters
Electric chainsaw
Domestic waterworks
Garden pump
Dirty water pump
Leaf blowers
Garden hoeGard
en eq
uipm
ent
SWISSM [email protected], w w w.swissm.ch
2008
Lawn trimming
Electric lawn trimmers
RT 550DLawn trimmer
Powerful, lightweight units for cutting grass on small areas, for path maintenance and for cutting grass in places where access is difficult for a lawn mower. With replaceable double line spool and automatic line extension. Ergonomic, fatigue-free use thanks to an adjustable additional handle.
Article number: 310.550.030 EAN-Code: 4250116804689
Mains: 230 V~50 HzRating: 550 WSpeed: 10,000 rpmCutting circle: Ø 320 mmLine diameter: 1.6 mmLine length: 8 m
Features:Twin line automatic jog system2. HandleCable strain relief clampTelescopic handleAngle adjustmentTurning handle
RT 280-21Lawn trimmer
Mains: 230 V~50 HzRating: 280 WSpeed: 10,000 rpmCutting circle: Ø 210 mmLine diameter: 1.2 mmLine length: 10 m
Article number: 310.550.026 EAN-Code: 4250116890859
Features:Twin line automatic jog system2nd handleCable strain relief clamp
54
Trimming lawns, cultivating
BMT 700Petrol motor trimmer
Article number: 310.550.040 EAN-Code: 4250116801800
Rating: 700 WEngine type: 26cc 2-stroke engineCutting circle: Ø 380 mm
Features:Line diameter: 2 mm Automatic jog systemCarry strapAdjustable handle
BMS 900 BMS 900 TPetrol motor scythe
BMS 900 BMS 900 TRating: 0.9 kW 0.9 kWEngine type: 33cc 2-stroke engine 33cc 2-stroke engineCutting circle: 380 mm with line 380 mm with lineLine diameter: 2 mm 2 mmCutting circle with blade 3-tooth 230 mm 3-tooth 230 mmTeilbare Welle: No Yes
Article number: BMS 900 310.750.020 EAN-Code: 4250116806737
Article number: BMS 900 T 310.750.040 EAN-Code: 4250116891924
Features:Twin line with automatic jog systemBike handleCarry strapPatented easy start system
Lightweight, powerful motor scythes
Powerful motor scythes with combination head for twin line spool or cultivating blades.Reliable start with manual petrol injectionLightweight, ergonomic handling with compact motor head and double handle that can be adjusted to the user’s body size with safety ON/OFF switch and adjustable shoulder strap. The perfect maintenance unit for lawns, meadows and uncultivated land.
55
BMS 900 T with split shaft
LS 1200-330Electric cultivator
Rating: 1,200 WWorking width: 33 cmGrass box: 30 l - textileNo. of blades: 20Blade thickness: 2 mmFront wheels: Ø 200 mm Rear: Ø 50 mm roller
Article number: 310.400.030 EAN-Code: 4250116890668
Features:Ergonomic, folding guide handleBall bearing mounted blade shaft with steel blades3 height settings
Lawn care
Electric lawn mowers Electric cultivators
Low cost, simple and safe to use. Low noise level does not annoy the neighbours. Comfortable to use with grass box and cutting height adjustment. Lightweight, compact construction, attractive design with durable high performance motors.
ELM 1000-33 ELM 1300-360Electric lawn mowers
ELM 1000-33 ELM 1300-360Mains: 250 V~50 Hz 250 V~50 HzRating: 1,000 W 1,300 WIdling speed: 2,850 rpm 2,800 rpmMotor: Induction motor Induction motorCutting width: 33 cm 36 cmHeight adjustment: 3 settings from 25-70 mmGrass box: 28 l 40 l
Article number: ELM 1000-33 310.200.020 EAN-Code: 4250116805785
Article number: ELM 1300-360 310.200.050 EAN-Code: 4250116892440
Features of the ELM 1300-360:Central height adjustmentErgonomic, folding guide handleCable guideCutting height adjustment from 25 – 70 mm
56
AGS 7.2-70Cordless grass shears
Article number: 310.100.020 EAN-Code: 4250116800476
Rating: 7.2 V – 1,200 mAhCharging time: 3-5 hoursCutting width: ø 70 mmOperating time: approx. 70 min
Features:Guide handleWheelsSafety switchCharger
AHT 19-460Battery-Heckenschere
Article number: 320.120.030 EAN-Code: 4250116892068
Rating: 19.2 VBattery: 1.7 Ah Ni-CaIdling speed: 1,500 rpmCutting length: 46 cmTooth spacing: 10 mm Bar length: 510 cm Charging time: 1 hour
Features:Hand guardBlades cut on both sides
Cordless lawn care toolsCordless hedge cutter
Our battery-powered grass shears and lawn trimmers are the perfect tools for small gardens and for keeping lawn edges and paths neat and tidy. Complete with chargers, they can be used at any time and then quickly recharged. Lightweight and cordless, they can be used easily and without causing fatigue even by older people.
Lawn care & sawing and wood care
57
AGS 19-240Cordless lawn trimmer
Article number: 310.520.010 EAN-Code: 4250116890569
Rating: 19.2 VBattery: 1.7 AhSpeed: 800 rpmCutting circle: 25 cmLine diameter: 1.2 cmCharging time: 1 hour
Features:Twin lineAutomatic jog system2nd handleTelescopic handle1 h charger
HT 520-580 HT 500-555Electric hedge cutter
HT 520-580 HT 500-555Mains: 230 V~50 Hz 230 V~50 HzRating: 520 W 500 WBar length: 570 mm 555 mmTooth spacing: 20 mm 16 mmSpeed: 3,000 rpm 3,000 rpm
Article number: HT 520-580 320.100.020 EAN-Code: 4250116800490
Article number: HT 500-555 320.100.010 EAN-Code: 4250116800483
PHT 500-560Petrol hedge cutter
Engine type: 22 cc – 2 strokeRating: 500 WBar length: 630 mmCutting length: 600 mmTooth spacing: 24 mm
Article number: 320.150.020 EAN-Code: 4250116800926
Features:2-hand safety switch with double, counter-rotating safety blades that cut on both sidesBlade coverBar guardPatented easy start system
HT 620-600Electric hedge cutter
Mains: 230 V~50 HzRating: 620 WBar length: 680 mmCutting length: 600 mmTooth spacing: 24 mmSpeed: 3,000 rpm
Article number: 320.100.070 EAN-Code: 4250116892198
Features:2-hand safety switch with mechanical immediate stop3-point circuit for extended useCounter-rotating safety blades that cut on both sidesAluminium blade coverImpact guardCable strain relief clampMetal gearboxITS – GS approved
Features:2-hand safety switch with immediate stop (on HT 500-555)with mechanical immediate stop(on HT 520-580)Counter-rotating safety blades that cut on both sidesAluminium blade coverImpact guard, cable strain relief clampMetal gearboxITS – GS approved
Electric and petrol hedge cutters SWISSM hedge cutters are extremely powerful and ergonomically balanced for long, fatigue-free work, even on difficult land.They have a high safety standard with an IMMEDIATE STOP and safe, easy grip two-hand control. The specially hardened blades ensure a perfect cut over a long time. The low vibrati-on and low noise level make hedge cutting easy and prevent fatigue.
58
Cutting and trimming hedges
PCS 42-40Petrol chainsaw
Article number: 320.450.020 EAN-Code: 4250116892099
Displacement: 42.5 ccRating: 1.8 kWOil capacity: 260 mlFuel capacity: 550 mlBar length: 45 cmOregon chainCutting speed: 18.5 m/sec
Features:Safety switchLarge hand guardChain guide with return pinionChain catch boltAnti-vibration system
EK 2000-400 Electric chainsawwith chain tensioning without tools
Mains: 230 V~50 HzRating: 2,000 WCutting speed: 13 m/sec.Cutting length: 400 mm
Article number: 320.400.070 EAN-Code: 4250116892259
Features:Chain from Carlton or OregonChinese barSturdy claw stopFelling handleAutomatic chain lubricationRecoil guard with mechanical brake2nd mechanical brakeBalanced centre of gravityErgonomic designTÜV – GS approved
Petrol chainsaw, Electric chainsaw
Sturdy, ergonomic, easy to use.The perfect tool for felling and sawing branches.The chainsaws are notable for their high capacity and safety.Ergonomically positioned handles and a perfect centre of gravity mean the saws can be used for a lengthy period without fatigue.
Sawing and wood care
59
With chain tensioning without tools
KS 200Chain sharpener
Article number: 340.400.140 EAN-Code: 4250116893508
Features:Rotary clamp 35° to the right/left.Chain fixed by large clamp screws
Mains: 230 V~50 HzRating: 220 WIdling speed: 7,500 rpmGrinding disc: 100 x 4.5 mm
EK 2400-400 wlkElectric chainsawwith chain tensioning without toolsMains: 230 V~50 HzRating: 2,400 WCutting speed: 17 m/sec.Cutting length: 400 mm
Article number: 320.400.120 EAN-Code: 4250116892853
Features:Oregon chain + Oregon barSturdy claw stopFelling handleAutomatic chain lubrication
60
Electric chainsaw The electric chainsaws are notable for their high capacity and safety.Ergonomically positioned handles and a perfect centre of gravity mean the saws can be used for a lengthy period without fatigue.The motor has been fitted lengthways to make it more comfortable to work with and for better weight distribution.
Sawing and wood care
With chain tensioning without tools
WW 1200-3800Domestic waterworks
Article number: 340.200.010 EAN-Code: 4250116800612
Features:24 l stainless steel tankStainless steel pump casing2-3 bar pressure switchPressure gauge
Mains: 230 V~50 HzRating: 1,200 WDelivery rate: 3,800 l/hDelivery pressure: 5 barMax. intake head: 8 m
WW 600-2800Domestic waterworks
Article number: 340.200.020 EAN-Code: 4250116890538
Features:Pressure and intake connection 1”Carry handle20 l steel tank2-3 bar pressure switchPressure gauge
Mains: 230 V ~ 50 HzRating: 600 WDelivery rate: max. 2,800 lDelivery pressure: 4 barMax. intake head: 8 m
61
Domestic waterworks Essential for the independent water supply for irrigating lawns and vegetables as well as supplying water to summerhouses, holiday homes or hunting lodges from a well or water butt. Water can even be extracted from a stream at any time. The storage tank integrated on the pump has an excess pressure switch and pressure gauge to ensure constant water pressure during extraction. In addition the pressure storage tank ensures that the quiet pump switches on less frequently.
Fresh water without mains connection
GPJ 1200-3800Garden pump
Article number: 340.100.010 EAN-Code: 4250116800605
Mains: 230 V~50 HzRating: 1,200 WMax. delivery rate: 3,800 l/hMax. delivery head: 50 mMax. delivery pressure: 5 barIntake head: 8 m
Features:Stainless pump casingCarry handleON/OFF switchPressure and intake connection 1”Overload guard
GPJ 600-2800Garden pump
Article number: 340.100.030 EAN-Code: 4250116892082
Features:Pressure and intake connection 1”Carry handleON/OFF switch
Mains: 230 V ~ 50 HzRating: 600 WDelivery rate: max. 2,800 lDelivery pressure: 3.5 barIntake head: 8 mWith or without plastic guard for motor
62
High performance garden pumps Our garden pumps enable you to extract water from a wide range of reservoirs such as cisterns, rainwater tanks, garden ponds or a stream with the spray pressure of a water pipe. They are also ideal for draining building trenches or flooded cellars.The high performance pump motors and dirt filters ensure that they will offer a long, trouble-free service life.
High pressure for watering the garden
WWP 400-8000Dirty water pump
Mains: 230 V~50 HzRating: 400 WMax. delivery rate: 7,500 l/hMax. delivery head: 5 mSubmersion depth: 5 mForeign bodies up to: 30 mm
Article number: 340.400.010 EAN-Code: 4250116800636
Features:Mains cable: 10 m H05RNFFloat switch1½“ IG pump outletOverload guard
Article number: 340.400.020 EAN-Code: 4250116800834
230 V~50 Hz750 W13,000 l/h9 m8 m35 mm
WWP 750-12500Dirty water pump-Niro
Article number: 340.400.040 EAN-Code: 4250116892075
Features:Mains cable 10m H07RNFFloat switch1¼“ IG hose connectorOverload guardTÜV – GS approved
Mains: 230 V~50 HzRating: 750 WMax. delivery rate: 12,500 l/hMax. delivery head: 8 mSubmersion depth: 5 mForeign bodies up to: 35 mm
WWP 800-13000Dirty water pump
CWP 250Dirty water pump-Niro
Article number: 340.300.040 EAN-Code: 4250116800629
Features:Mains cable: 10 m H05RNFFloat switch1½“ IG pump outletOverload guardTÜV – GS approved
Mains: 230 V~50 HzRating: 250 WMax. delivery rate: 6,500 l/hMax. delivery head: 5,5 mSubmersion depth: 5 mForeign bodies up to: 3 mm
63
Submersible motor pumps for dirty water
Powerful dirty water pumps for draining ponds, cellars, garden fountains or flooded building trenches and pumping water from rainwater tanks into the garden pond and much more.The integral float switch reliably prevents accidental dry operation.
Draining, pumping out and pumping over
EGV 2500Electric leaf blower
Article number: 320.200.070 EAN-Code: 4250116893485
Features:3 functions: vacuuming, blowing, shreddingCarry strapLeaf bag 45 lWheels
Mains: 230 V~50 HzRating: 2,500 WBlower speed: max. 275 km/hSuction capacity: 13.5 cbm/minVolume reduction: 10:1
64
Leaf vacuuming and blowing
Leaf blowers Powerful leaf blower with shredder and large debris bag. Easy handling with rollers on the bottom and an adjustable shoulder strap.Can be switched to suction and blowing function. The integral shredder reduces the size of the vacuumed leafs to around 1/10 of its volume. This means that large volumes of leafs can be removed without having to empty the debris bag.
Article number: PMT 40 310.750.010 EAN-Code: 4250116801701
Article number: PMT 50 310.750.050 EAN-Code: 4250116893744
PMT 40 PMT 50Garden care hoes
PMT 40 PMT 50Motor: 1-cyl, 4-stroke 1-cyl, 4-stroke OHV, 118 cc OHV, 163 ccRating: 2.93 kW / 4 PS 3.5 kW / 4.76 PSWorking width: 36 cm 56 - 60 cmTank capacity: 1.6 l
Features PMT 40/PMT 50:Hoe blades: 4 x 26 cm diameterFuel: Unleaded petrolDead man’s controlGuide wheel
65
Loosening soil
Petrol hoes These powerful hoes are designed for turning over even very compacted soil. The sturdy 4-stroke engine and specially designed blades ensure rapid operation and perfect soil loosening.Comfortable projecting handles with throttle lever and IMMEDIATE STOP as well as the slewing guide wheel ensure mobility and easy control of the motor hoe.
SG 3-5Garden sprayer
Max. capacity: 5 lOperating pressure: 3 bar
Article number: 330.200.014 EAN-Code: 4250116800582
Features:Carry strapBrass lanceBrass nozzle
EGS 2400Electric shredder
Mains: 230 V~50 HzRating : 2,400 WMax. branch size: 40 mm
Article number: 320.300.030 EAN-Code: 4250116890842
Features: Large filling openingSturdy chassis with wheelsMotor brake Motor circuit-breaker
66
Electric garden shreddersGarden sprayers
Powerful and safe garden shredders with automatic branch infeed and sturdy cutting units for shredding hedge and tree cuttings, shrubs and bushes into small pieces for composting.The features of all MATRIX shredders comply with the latest safety standards with a safety motor brake, motor circuit-breaker, large branch hopper with recoil guard. Large wheels provide stability and mobility.
Shredding, composting
plug and work [email protected], www.swissm.ch
SWISSM2008
SWISSM Kanalga Impex GmbHLaettenstrasse 58 5242 BirrSwitzerlandTel: +41 765 393 881 Fax: +41 565 353 791 E-mail: [email protected] www.swissm.ch
SW
ISS
Mp
lug
an
d w
ork