173

© 2014 National Oilwell Varco www.nov.com/Elmar

Elmar Product Line

Sect

ion

3 -

WPC

E W

irelin

e Pr

essu

re C

ontro

l

Elmar designs and manufactures pressure control equipment and accessories for slickline and braided cable operations.NOV Elmar Pressure Control Equipment Strings are fully traceable and certifi ed by independent authorities.

Electric Line PressureControl Equipment String

TYPICAL PRESSURE CONTROLEQUIPMENT STRING RIG-UPItem Description1 “Enviro” Stuffing Box, Line Wiper and Grease Head with (6) concentric flow tubes1.1 Extra Injection Coupling and flotube for dual injection1.2 Protector Sleeve for cable head2 Flow Control Manifold *2.1 Hydraulic Line Wiper with cable guide 7/32” / .230”2.2 Grease Injection Control Head with (4) concentric flow tubes .230” wire2.3 Low Pressure Waste Grease Hose x 120ft (from line wiper) 3.5K psi WP3 Grease Hose 1/2” x 120ft long with hex unions *4 Combination Hydraulic Tool Catcher/Ball Check Valve 1 3/16” fish neck 4.1 Combination Hydraulic Tool Catcher/Ball Check Valve 1 3/16” fish neck c/w 1.2” NPT port 5 Integral Grease Head Cable Cutter Sub for cutting cable up 15/32”5.1 Hand Pump Assembly for Cable Cutter Sub 5.2 Hose Assembly 1/4” x 100ft long with quick connections 10,000 psi WP 6 Hydraulic Stuffing Box with 16” dia wheel .108” wire7 Lightweight Lubricator Section with threaded quick unions, 4ft long 8 Lightweight Lubricator Section with threaded quick unions, 5ft long 9 Lightweight Lubricator Section with threaded quick unions, 6ft long 10 Lightweight Lubricator Section with threaded quick unions, 8ft long 11 Lightweight Lubricator Section with threaded quick unions, 10ft long12 3” Lubricator Section with integral quick unions (various lengths available on request)13 Lubricator Lifting Clamp, Spreader and wire rope slings (sling length to be specified) 13.1 Lubricator Dolly with 4 3/4” -4x2thd quick union14 Hydraulic Tool Trap with external indicator15 Quick Test Sub15.1 Hand Pump Assembly for Quick Test Sub15.2 Hose Assembly 1/4” x 25ft long with quick connections 10,000 psi WP16 Triple Hydraulic Compact BOP with manifold block17 Galvanised Triple BOP Cage18 Dual Hydraulic Compact BOP with manifold block19 Galvanised Dual BOP Cage20 Single Hydraulic Compact BOP with manifold block21 Galvanised Single BOP Cage22 Lightweight BOP with manifold block; available in Single, Dual and Triple configurations23 Stainless Steel Crash Frame for “Lightweight” BOP configurations24 0-10,000 PSI BOP Manifold Gauge25 Pump-In Sub with (1) 2”-1502 side outlet 25.1 Plug Valve 2”-1502 Weco male x female 26 Wellhead Adapter Flange 3 1/16” 10,000LB 6BX BX-154 27 5 Series 3-BOP Grease and Hydraulic Control Module with (2) 175:1 pumps (see versions)28 5 Series Mainframe29 Grease Transfer Pump 4:1 ratio30 Hydraulic Actuator LW/SB/TC/3-BOP *31 Lifting Bail32 Test Cap33 Test Plug and Collar34 Safety Flow Diverter Valve and wire clamp35 Male Thread Protector (spare)36 Female Thread Protector (spare)37 Line Wiper, Stuffing Box or Tool Catcher Hand Pump *38 Hydraulic Hose 1/4” x 100ft long with quick couplings *39 Tool Trap or BOP Hand Pump *40 Hydraulic Hose 1/4” x 50ft long with quick couplings *41 “Y” Hose, BOP Open *42 “Y” Hose, BOP Close *43 Low Pressure Waste Grease Hose x 60ft long (from BOP) 3.500 psi WP44 Low Pressure Waste Grease Hose x 60ft long (from module) 3.500 psi WP

Ball Check ValveThe Elmar Ball Check Valve is a safety device for installation below the grease injection control head. It will seal off the well in the event of the cable being broken/pulled out of the Grease Injection Head.

Tool TrapThe Elmar Hydraulic Tool Trap with External Indicator protects the wellbore from inadvertent tools pull-off.

Wireline ValveThe Elmar Lightweight Wireline Valve gives positive protection during well service operations, when operating with slickline, braided wireline and electric line. Multiline ram seals allow the use of the same seal configuration for electric line and slickline.

Tool CatcherThe Elmar Tool Catcher is used to catch and hold the tool safely both during pressure testing and in the event of the cable being inadvertently pulled off at surface thus preventing a possible fishing job.

Lubricator SectionsElmar Lubricators are used to insert and retrieve a tool string on a well under pressure.

Quick Test SubThe Elmar Quick Test Sub (QTS) is designed to save substantial rig time while pressure testing the Wireline Pressure Control Equipment String in multiple run operations.

Wellhead Adapter FlangeThe Elmar Wellhead Adapter Flange provides a means of connecting in a safe manner the Wireline Pressure Control Equipment String to thewellhead.

Pump-in SubThe Elmar Pump-in Sub is designed to allow introduction of high volumes of fluid into the well via a hammer lugtype connection.

Enviro™ Grease InjectionControl HeadThe Elmar Enviro™ GreaseInjection Control Headcreates a seal around a movingwireline, allowing interventionaccess to wells under pressure.

Note: For corresponding diagram see next page. Additional equipment available on request.

Cable Cutter Sub - CCSThe Elmar CCS has been designed for use in the event of wire becoming jammed in the grease injection flotubes, to the extent that no wireline movement (upwards or downwards) is possible, the wireline can be cleanly cut well above the wireline valve.

Pressure Control Equipment Hook-up

Sect

ion

3 -

WPC

E W

irelin

e Pr

essu

re C

ontro

l

174

© 2014 National Oilwell Varco www.nov.com/Elmar

Elmar Product Line

The Elmar Pressure Control Equipment String is designed for complete control of the well pressure during electric/strandedline operations on a “live” well.

Typical Electric Line Pressure Control Equipment String Rig-up

They are available with 5,000 psi, 10,000 psi, 15,000 psi and 20,000 psi working pressurerating, Standard and H2S service. ID ranges from 2 1/2” to 6 3/8”.

Please refer to table on previous page.*Not required when Control Module is purchased.Equipment supplied with thread protectors. Wire sizeto be specified when ordering - where appropriate.

37 38

38

3

2

-

39

37

37

13

13.1 39

40

41

42

4318

35

25

26

1643 43

32

24

20

36 31 15 34 33

19 21

17

15.2 15.1

40 14

7 11 12

27

44

30

29

28

386 4

2.2

2.3

2.1

55.1

5.2

4.1 31

11.1

1.2

25.1

22

23

167

183

181

180

183 182

183

187 206

188

190 192

217

202 195

167

167

167

167

167

165

142

130197

167

195

199199

182

Item number from table on previous page Data sheet page number