EFSERIES

BULLETIN NO. EF0212

E L E C T R I CC H A I NHOI S T

125kg 250kg 500kg 1000kg 2000kg

Emergency stopas option

Note: Al l measurements used in this catalogue

are based on metr ic f igures(Sl uni t system).

Three phase and Single phase

Single and dual speeds

Direct and low voltage control

Highly economical

K I T O E F S e r i e sE l e c t r i c C h a i n H o i s t

1

2

3

4

5

6

7

8

1

2

4

8

5

3

6

7

CapacitiesSingle phase hoist:250 to 1000kgs, three phase hoist: 125 to 2000kgs.

Dual SpeedsDual speed is available for each model on 3 phase hoists.

Interchangeable Mechanical PartsMechanical parts are almost interchangeable between those of 3 phase and single phase hoists for easy maintenance.

Standard Voltages and Frequencies3 phase: 220/380V-50Hz, 415V-50Hz,346V-50Hz and 220/440V-60Hz.1 phase: 220V, 240V-50Hz, 110V, 115V, 220-60HZ and 230V-50/60Hz.

ApprovedC.S.A (Canada) D.B.G (Germany) D.I.R (Australia) Marine Dept. (New Zealand)

Pull-Rotor Type Motor BrakeExclusive Pull-rotor type motor braking system provides high braking capability for the most sure way to stop the load at the desired positions.

Pull-Rotor Type MotorTotally enclosed exclusive pull rotor type motor permits ideal operation of hoists. (Insulation Class B)

Wear-Resistant Friction ClutchKITO's friction clutch,which prevents from over-winding,allows the motor to run free at the highest and lowest hook positions. The Friction Clutch is factory preset and needs no adjustment under normal operations.

Special Load ChainExclusively developed case hardened alloy steel chain with high and uniform strength complies with JIS specifications. ND chain is available for use in such applications where rain, sea water,steam, chemical or other harmful atmosphere might affect regular chains.

Aluminum Hoist BodyAluminum die-casting hoist body provides lighter weight, compactness, high mobility and rapid heat dissipation. Totally enclosed weather-resistance construction allows ideal use in humid atmosphere.(Equivalent to IP 54 Grade as specified by I.E.C. Push button swich IP 65)

Quick Change of Voltage To change from the voltage to the other, it is only necessary to change the position of lead wires on three phase hoists.

Highly Insulated Push Button StationPush button station enclosed in a high insulation plastic houseing."UP" and "DN" buttons are mechanically interlocked for safe swich operations. Low Voltage: 48V push button station and direct voltage model are available on request on both 3 phase and single phase hoists.

Emergency Stop Device is available as option upon request.

Swivel Bottom HookDrop-forged heat treated hook does not fracture but opens slowly when excessively overloaded. Built-in bearing assures easy swiveling of bottom hook.Overload warning device: Load Bell is available as option for warning overloading.

Features of TrolleysDeveloped motorized trolleys with exclusive motor combined directly with trolley brake for simple mechanism and accurate positioning of loads.Also, plain and geared type trolleys are developed with protective lugs as standard.All trolleys are adjustable for various beam widths including wider width are option.

— —EFSSP(EFSSG)003SEFSSP(EFSSG)005LEFSSP(EFSSG)005SEFSSP(EFSSG)010L — — — — — — — — — —

EF, EFL, EFS, EFSL EF: 3 phase, hook suspension type, direct voltage control. EFS: 1 phase, hook suspension type, direct voltage control. "L" in code shows low voltage control system.

•Figures in parentheses are data for single phase hoists. Other data for single phase hoists are same as the figures for 3 phase hoists.•Data for EFSL are same as the data for EFS. Codes for EFSL are specified as EFSL 003S and EFSL 005L.•D.V.C.=Direct voltage control L.V.C.=Low voltage control.•Data in column "Duty Rating" are shown by % ED for 50Hz and TIME RATING(minutes) for 60Hz.

EF001SEF003LEF003SEF005LEF005SEF010LEF010SEF020LEF001SDEF003LDEF003SDEF005LDEF005SDEF010LDEF010SDEF020LD

125250250500500

100010002000

125250250500500

100010002000

Capacity(kg)

Std.Lift(m)

Test Load(kg)

PushButton Cord:L

(m)

LoadChainFalls

(Lines)

Min. Headroom

: C(mm)

1phaseD.V.C.

1phaseD.V.C.

3phasekW Duty Rating

Code MotorLifting Speed M.P.M.

D.V.C. L.V.C.3phase

Mass (Net Weight) (kgs)

D.V.C. L.V.C.50Hz 60Hz

Sin

gle

Sp

eed

Typ

eD

ual S

pee

d T

ype

3.0

3.0

EFL001SEFL003LEFL003SEFL005LEFL005SEFL010LEFL010SEFL020LEFL001SDEFL003LDEFL003SDEFL005LDEFL005SDEFL010LDEFL010SDEFL020LD

——

EFS003SEFS005LEFS005SEFS010L

——————————

2.82.82.92.93.03.03.03.12.82.82.92.93.03.03.03.1

490525510550560635630800490525510550560635630800

1212121212121212

26292832414656622629283241465763

28313135444959652831313544496167

——32364550——————————

156313313625625

125012502500156313313625625

125012502500

0.30.3

0.45(0.25)0.45(0.25)

0.8(0.4)0.8(0.4)

1.51.5

0.3/0.10.3/0.1

0.45/0.150.45/0.150.8/0.270.8/0.271.5/0.51.5/0.5

5050

50(30)50(30)50(30)50(30)

5050

40/4040/4040/4040/4040/4040/4040/4040/40

10.05.0

8.0(3.8)4.0(1.9)7.0(3.5)3.5(1.8)

6.53.3

10.0/3.35.0/1.78.0/2.74.0/1.37.0/2.33.5/1.26.5/2.23.3/1.1

12.06.0

9.6(4.6)4.8(2.3)8.4(4.2)4.2(2.1)

7.83.9

9.3/3.14.6/1.59.6/3.24.8/1.68.4/2.84.2/1.47.8/2.63.9/1.3

EFSP(EFSG), EFLSP(EFLSG), EFSSP(EFLSG), EFSLSP(EFSLSG) SP: complete with TS2 model plain trolley. SG: complete with TS2 model geared trolley.

•Data for motor, lifting speed, load chain falls and test load are same as the data for EF, EEFL, EEFS, EEFSL.•W20*, W30* mean 203 and 305mm beam width adjustability respectively as option.•In case of only straight 1-beam, 0.5ton plain trolley can be used on 58mm and less width beam and 1ton plain trolley and geared trolley can be used on 74mm and less width beam.•Economical trolleys available upon request.•Figures in parentheses are data for geared trolley type hoists.

EFSP(EFSG)001SEFSP(EFSG)003LEFSP(EFSG)003SEFSP(EFSG)005LEFSP(EFSG)005SEFSP(EFSG)010LEFSP(EFSG)010SEFSP(EFSG)020LEFSP(EFSG)001SDEFSP(EFSG)003LDEFSP(EFSG)003SDEFSP(EFSG)005LDEFSP(EFSG)005SDEFSP(EFSG)010LDEFSP(EFSG)010SDEFSP(EFSG)020LD

125250250500500

100010002000

125250250500500

100010002000

Capacity(kg)

Std.Lift(m)

PushButton Cord:L

(m)

Std.HandChainLength: N (m)

Min. Headroom

: C(mm)

Min.Radius

For Curve(mm)

1phaseD.V.C.

1phaseD.V.C.

3phaseCode

D.V.C. L.V.C.3phaseOption

Mass (Net Weight) (kgs)Flange Width Adjustibility (mm)

D.V.C.W20* W30*Standard

L.V.C.

Sin

gle

Sp

eed

Typ

eD

ual S

pee

d T

ype

3.0

3.0

EFLSP(EFLSG)001SEFLSP(EFLSG)003LEFLSP(EFLSG)003SEFLSP(EFLSG)005LEFLSP(EFLSG)005SEFLSP(EFLSG)010LEFLSP(EFLSG)010SEFLSP(EFLSG)020LEFLSP(EFLSG)001SDEFLSP(EFLSG)003LDEFLSP(EFLSG)003SDEFLSP(EFLSG)005LDEFLSP(EFLSG)005SDEFLSP(EFLSG)010LDEFLSP(EFLSG)010SDEFLSP(EFLSG)020LD

2.82.82.92.93.03.03.03.12.82.82.92.93.03.03.03.1

31(39)34(42)33(41)37(45)46(54)54(59)64(69)74(78)31(39)34(42)33(41)37(45)46(54)54(59)66(71)76(80)

33(41)36(44)36(44)40(48)49(57)57(62)67(72)77(81)33(41)36(44)36(44)40(48)49(57)57(62)69(74)79(83)

——

37(45)41(49)50(58)57(63)

——————————

1100(1300)

1300

1500

1100(1300)

1300

1500

204 to 305(204 to 305)

154 to 305(154 to 305)

204 to 305(204 to 305)

154 to 305(154 to 305)

103 to 203(128 to 203)

128 to 203(128 to 203)

—

103 to 203(128 to 203)

128 to 203(128 to 203)

—

50 to 102(58 to 127)

58 to 127

82 to 153

50 to 102(58 to 127)

58 to 127

82 to 153

2.7

2.7

480(495)520(535)500(525)540(555)550(565)

630625775

480(495)520(535)500(525)540(555)550(565)

630635775

EFM, EFLM M:complete with motorized trolley

•Data for hoist motor, lifting speed, load chain falls and test load are same as the data for EF, EEFL.•W20*, W30* mean 203 and 305mm beam width adjustability as option.•Data in column "Duty Raing" are shpwn by % ED for 50Hz and TIME RATING(minute) for 60Hz.•Figures in ( )show one inch (25mm) wider than standard as option by using standard range suspension shaft and adding extra spacers.

EFM001SEFM003LEFM003SEFM005LEFM005SEFM010LEFM010SEFM020LEFM001SDEFM003LDEFM003SDEFM005LDEFM005SDEFM010LDEFM010SDEFM020LD

125250250500500

100010002000

125250250500500

100010002000

Capacity(kg)

Std.Lift(m)

PushButton Cord:L

(m)

Min. Headroom

: C(mm)

Min.Radius

For Curve(mm)

3phaseCode

D.V.C. L.V.C. 60Hz50HzDuty RatingkW

Traveling SpeedM.P.M.

Motor 3 phase(For Traveling) 3phaseOption

Mass(Net Weight )(kgs)Flange Width Adjustibility (mm)

D.V.C.W20* W30*Standard

L.V.C.

3.0

3.0

EFLM001SEFLM003LEFLM003SEFLM005LEFLM005SEFLM010LEFLM010SEFLM020LEFLM001SDEFLM003LDEFLM003SDEFLM005LDEFLM005SDEFLM010LDEFLM010SDEFLM020LD

3.2

3.2

54575660698090

11254575660698091

113

56595963728393

11556595963728395

117

1500

2000

1500

2000

204 to 305

154 to 305

179 to 305

204 to 305

154 to 305

179 to 305

128 to 203

—

—

128 to 203

—

—

58 to 127

58 to 127(128 to 153)

100 to 153(154 to 178)

58 to 127

58 to 127(128 to 153)

100 to 153(154 to 178)

530565550590600685675860530565550590600685675860

0.3

0.4

0.3

0.4

40

40

20

20

24

24

Sin

gle

Sp

eed

Typ

eD

ual S

pee

d T

ype

pg

ca

d

b eab

d

125250500

HoistCapacity

(kg)

125250

500-L

500-S1000-L

1000-S2000-L

HoistCapacity

(kg)

1000

2000

28

24

31

37

g

35.5

42.5

50

e

17.5

22.5

29

d

28

36.5

47.5

a

5

6.3

7.1

dTradeside

6.3

7.9

8.9

aInsidewidth

18

22

25

bOutsidewidth

15

19

21

p

Pitch

17.5

22.5

29

b

23.5

31

40

c

Top

Bottom

T&B

T&B

T: Top hook B: Bottom hook

(mm) (mm)

Capacity(kg)

125-S, 250-S250-L, 500-L

500-S, 1000-S1000-L, 2000-L

Max. lift (m)small

6384

large126157.5

Standard dimension of hook Standard dimension of load chain link•Any lift of chains is available on request. KITO chains are case hardened. No addition to the chain to increase the length is possible. The chain must be replaced with a new one of desired length. Specify the length of the chain when ordering.

•Chain container Chain containers made of canvas shown in the right table are available on request.

When the lift of your hoist exceeds the maximum lift values shown in the right table, a chain container made of steel is available on request including the lift range of canvas made container.

•Side plates of KITO trolleys are specially mounted to shaft, which allows the trolley to travel smoothly on the I-Beam. Thus, the load is equally distributed over the four track wheels.

•The Beam on which the trolley travels must be at least 125mm (in case of 2 ton: 150mm) in height for the smooth and sure operation of the trolley.

Hook suspension type,single fall chain Cap.

125,250,500,1000kgs 3 Phase(EF),250,500kgs 1 Phase(EFS)

Hook suspension type,double fall chain Cap.

250,500,1000,2000kgs 3 Phase500,1000kgs 1 Phase Plain trolley type Geared trolley type Motorized trolley type

Dimensions (mm)

EF,EFS EFEFLEFSEFSL

EFSPEFLSPEFSSPEFSLSP

EFSGEFLSGEFSSGEFSLSG

EFMEFLM

EFSP,EFSSP EFSG,EFSSG EFM

Capacity (kg)125-S

abdee1

e2

ghijko

SPSGMFSPSG

SPSGSPSGMFSPSGMFSPSGMF

e3

f

p

q

s

u

250-L 250-S 500-L 500-S 1-L 1-S 2-L143(218)

140

159

260[270]

180.5[190.5]

590[680]

580[670]

595[685]

630[720]

182

236

24

276

201

510

152

46

204

345

76

106

100

19

28

25

B-45

B-48

B-45

143(218)

140

159

260[270]

180.5[190.5]

590[680]

580[670]

595[685]

630[720]

182

236

24

276

201

510

152

46

204

345

76

106

100

19

28

25

B-45

B-48

B-45

147(241)

148

174

269[282]

182[195]

610[700]

600[690]

615[705]

650[740]

182

236

24

276

201

510

152

46

204

345

76

106

100

19

28

25

B-45

B-48

B-45

147(241)

148

174

269[282]

182[195]

610[700]

600[690]

615[705]

650[740]

182

236

24

276

201

510

152

46

204

345

76

106

100

19

28

25

B-45

B-48

B-45

147(224)

167

218

311[390]

202[281]

750[830]

740[820]

755[835]

790[870]

182

236

24

276

201

510

152

46

204

345

76

106

100

19

28

25

B-45

B-48

B-45

147(224)

167

218

311[390]

202[281]

765[845]

755[835]

755[835]

810[890]

236

236

31

306

203

510

152

56

249

345

95

106

102

28

28

24

B-48

B-48

B-45

169(253)

183

233

348.5[417.5]

232[301]

870[910]

860[900]

860[900]

915[955]

236

236

31

306

203

510

152

56

249

345

95

106

102

28

28

24

B-48

B-48

B-45

169(253)

183

250.5

366[435]

293[362]

970[1010]

940[980]

940[980]

1030[1070]

280

280

37

342

236

510

154

69

300

385

112

109

115

34

34

32

B-57

B-57

B-56•Dimension are approximate. •Dimension for dual speed hoists are the same as for single speed hoists.•Figures in brackets are data for large size chain containers. •Figures in parentheses are data for L.V.C.

The contactor box for emergency stop device is attachedoutside hoist body when the hoist is 125kg or 250(L)kg forL.V.C. and dual speed type.

po

q

Contactorbox

Contactorbox

Contactorbox

f

f

t

t

t

q

h

g

g

g

e3

e3

LC

LC

e3

L

C

Ci j

u

s

N

e2

e1

e

d123

L

a b

C

g

s123

123

B

p

qs

B k

u

u

Features and performances of all the products described in this catalogue are designed for their own intended purposes.KITO will not be held liable for any malfunction, lack of performance or accident if the product is being used in conjunction with any other equipment.If the product is to be used for unintended purposes, please confirm with your dealer in advance. Printed in Japan 14.12(A.H)EF01-10

100% recycled-content lebel

3-37-4, Yoyogi, Shibuya-ku, Tokyo 151-0053, Japan

TEL: +81 3-5371-7341 FAX: +81 3-5371-7349

E-mail: overseas@kito.co.jp

URL http://www.kito.co.jp

Overseas Subsidiaries (and Affiliated Company) for Sales

S u b s i d i a r i e s

U.S.A.HARRINGTON HOISTS, INC.

401 West End Avenue, Manheim, PA 17545, U.S.A.

TEL: +1 717-665-2000 FAX: +1 717-665-2861

URL http://www.harringtonhoists.com/

CANADAKITO CANADA INC.

309-3815 1st. Avenue, Burnaby, BC, V5C 3V6, CANADA

TEL: +1 604-291-9955 FAX: +1 604-294-8855

E-mail: info@kito.ca

URL http://www.kito.ca/

A f f i l i a t e d C o m p a n y

THAILANDSIAM KITO CO., LTD.

138/16-17 Jewellery Center Building, 11th Floor, Nares Road,

Bangrak, Bangkok 10500 THAILAND

TEL: +66 2-267-3388~94 FAX: +66 2-267-3395

E-mail: siamkito@asiaaccess.net.th

Distributed by:

All specifications herein are subject to change without notice.