2
FarmPaint.com Technical Data Sheet Elastomeric Pourable Driveway Crack Filler Polymer Modified Asphalt Emulsion Based Crack Sealant Revised: 11/10 Form No.: FP-TD15571 Manufacturer: FarmPaint.com 700 Phillips Lane Lexington, KY 40504 877-441-3276 Description A polymer modified elastomeric asphalt emulsion crack sealant designed for sealing cracks up to 3/4” wide in asphalt pavement surfaces. Uses • All types of asphalt pavements. • DO NOT USE on concrete or masonry surfaces. • Do not apply to cracks/holes containing water. Surface Preparation Proper preparation of the crack to be treated is vital to ensuring maximum performance. Use a stiff brush to remove all loose material, dirt, oil, vegetation and existing sealants. Cracks deeper than 1” should be filled with backer-rod or a suitable material to 1/2” depth. Application Shake well before using. Using pour spout, pour product into crack slightly above surface level. Material may settle, requiring a second application. Always allow 24 hours between applications. Drying Time Depending on weather conditions, Crack Sealant will develop a skinned surface that may be opened to traffic in 1 to 12 hours. However, to assure a traffic-resistant surface, the pavement should be closed to traffic for 12 to 24 hours from application. Always test for trafficability before opening for regular use. Clean Up Wash tools with water before material dries. Weather Conditions • Application temperature must be a minimum of 50 °F and rising. Do not apply when temperature is expected to drop below 40 °F within a 24 hour period. • In areas where dew or fog accumulates in the early evening, it is best to coat in the morning. Stop coating by early afternoon (3:00 pm) to prevent wash off, which will occur if dew, fog, or rain arrives before coating dries. • Do not apply if rain is imminent or forecast within 24 hours of application. Coverage (Approximate) • For estimation purposes, up to 150 lineal feet per gallon for cracks 1/2” x 1/4” deep. Precautions • Do Not Heat OrThin • Do Not Freeze • Do Not Store AtTemperatures Below 50 ºF Safety And Environmental Precautions • ReferTo Material Safety Data Sheet Before Using • For Exterior Application Only • Apply In A Well Ventilated Area • Close Container When Not In Use • Environmental Information Is OnThe Material Safety Data Sheet • Do Not Reuse Empty Container • Volatile Organic Content (VOC) Is 10 Gm/Liter Max • Keep Out Of Reach Of Children • Avoid BreathingVapors And Contact With Eyes And Skin. Do Not Take Internally • Wear Eye Protection And Gloves When Applying Elastomeric Pourable Driveway Crack Filler Polymer Modified Asphalt Emulsion Based Crack Sealant • Elastomeric Formula for Outstanding Flexibility & Adhesion • Fills & Seals Cracks in Asphalt Driveways • Seals Out Moisture • High Solids Formula for Lasting Repair • Dries Black

Elastomeric Pourable Revised: 11/10 Driveway Crack Fillerfarmpaint.com/pdfs/Tech Data/FP-TD15571.pdf · 2010-11-08 · FarmPaint.com Technical Data Sheet Elastomeric Pourable Driveway

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Elastomeric Pourable Revised: 11/10 Driveway Crack Fillerfarmpaint.com/pdfs/Tech Data/FP-TD15571.pdf · 2010-11-08 · FarmPaint.com Technical Data Sheet Elastomeric Pourable Driveway

FarmPaint.com

Technical Data Sheet

Elas

tom

eric

Pou

rabl

e D

rive

way

Cra

ck F

iller

Pol

ymer

Mod

ified

Asp

halt

Emul

sion

Bas

ed C

rack

Sea

lant

Revi

sed:

11/

10Fo

rm N

o.: F

P-TD

1557

1

Manufacturer:FarmPaint.com700 Phillips LaneLexington, KY 40504877-441-3276

DescriptionA polymer modified elastomeric asphalt emulsion crack sealant designed for sealing cracks up to 3/4” wide in asphalt pavement surfaces.

Uses•Alltypesofasphaltpavements.•DONOTUSEonconcreteormasonrysurfaces.•Donotapplytocracks/holescontainingwater.

Surface PreparationProper preparation of the crack to be treated is vitaltoensuringmaximumperformance.Useastiff brush to remove all loose material, dirt, oil, vegetation and existing sealants. Cracks deeper than 1” should be filled with backer-rod or a suitable material to 1/2” depth.

ApplicationShakewellbeforeusing.Usingpourspout,pourproduct into crack slightly above surface level. Material may settle, requiring a second application. Always allow 24 hours between applications.

Drying TimeDependingonweatherconditions,CrackSealantwill develop a skinned surface that may be opened to traffic in 1 to 12 hours. However, to assure a traffic-resistant surface, the pavement should be closed to traffic for 12 to 24 hours from application. Always test for trafficability before opening for regular use.

Clean UpWash tools with water before material dries.

Weather Conditions•Applicationtemperaturemustbeaminimumof 50°Fandrising.Donotapplywhentemperature is expected to drop below 40 °F within a 24 hour period. • Inareaswheredeworfogaccumulatesinthe early evening, it is best to coat in the morning. Stopcoatingbyearlyafternoon(3:00 pm) to prevent wash off, which will occur if dew, fog, or rain arrives before coating dries. •Donotapplyifrainisimminentorforecastwithin 24 hours of application.

Coverage (Approximate)•Forestimationpurposes,upto150linealfeetper gallon for cracks 1/2” x 1/4” deep.

Precautions•DoNotHeatOrThin•DoNotFreeze• DoNotStoreAtTemperaturesBelow50ºF

Safety And Environmental Precautions•ReferToMaterialSafetyDataSheetBeforeUsing•ForExteriorApplicationOnly•ApplyInAWellVentilatedArea•CloseContainerWhenNotInUse•EnvironmentalInformationIsOnTheMaterial SafetyDataSheet•DoNotReuseEmptyContainer•VolatileOrganicContent(VOC)Is10 Gm/Liter Max•KeepOutOfReachOfChildren•AvoidBreathingVaporsAndContactWithEyes AndSkin.DoNotTakeInternally•WearEyeProtectionAndGlovesWhenApplying

Elastomeric Pourable Driveway Crack FillerPolymer Modified Asphalt Emulsion Based Crack Sealant•ElastomericFormulaforOutstanding Flexibility & Adhesion •Fills&SealsCracksinAsphalt Driveways •SealsOutMoisture

•HighSolidsFormulafor LastingRepair •DriesBlack

Page 2: Elastomeric Pourable Revised: 11/10 Driveway Crack Fillerfarmpaint.com/pdfs/Tech Data/FP-TD15571.pdf · 2010-11-08 · FarmPaint.com Technical Data Sheet Elastomeric Pourable Driveway

700PhillipsLane•Lexington,KY40504Phone:877-441-3276

Copyright © 2010, FarmPaint.comAll rights reserved.

FarmPaint.com

•Warning:ThisProductContainsChemicals KnownToTheStateOfCaliforniaToCauseCancer AndBirthDefectsOrOtherReproductiveHarm

Packaging

Item# ContainerSize Pack Weight

65571 .9 Gallon 6 62.3 lbs.

* At time of manufacturing, containers are filled to maximum. However, due to the reduction in volume that occurs after cooling and settling, the actual volume may be less.

Ingredients: Cas No.Petroleum Asphalt 8052-42-4

Quartz 14808-60-7

SyntheticRubber 108-18-5

Water 7732-18-5

Alum.Silicate 1332-58-7

FormNo.:FP-TD15571Revised:11/10