EL Series - PakMarkas · • Polycarbonate lens and ABS base • High voltage transient and polarity reversal protection fitted • Operating Temp: -30°C - +55°C (-30°C lower limit

INDUSTRIAL

Directional Lighting │ Signal Towers

t +44(0)113 2375340 │ [email protected] │ www.deltadesign.co.uk

BEACONS

Models

Features and Benefits

PART NO. VOLTAGE WATTS AMPS COLOUR

423001 230Vac 15W 140mA Clear

423002 230Vac 15W 140mA Amber

423003 230Vac 15W 140mA Red

423004 230Vac 15W 140mA Blue

423005 230Vac 15W 140mA Green

423021 110Vac 15W 260mA Clear

423022 110Vac 15W 260mA Amber

423023 110Vac 15W 260mA Red

423024 110Vac 15W 260mA Blue

423025 110Vac 15W 260mA Green

• Single Flash• Polycarbonate lens and ABS base• High voltage transient and polarity reversal

protection fitted • Operating Temp: -30°C - +55°C

(-30°C lower limit subject to intermittent and non-continuous use at temperature below - 20°C)

• CE

The EL Seires is a high powered xenon beacon with an inner fresnel lens and a somooth easy-clean outter lens.

April 2013 Rev 1

EL SeriesXenon Beacon

INDUSTRIAL



BEACONS

Models



450002 230Vac 15W 140mA Amber

450003 230Vac 15W 140mA Red

450004 230Vac 15W 140mA Blue

450005 230Vac 15W 140mA Green

• Single Flash• Low power consumption• No moving parts - maintenance free• Polycarbonate lens and ABS base• High voltage transient and polarity reversal

protection fitted• Operating Temp: -20°C - +50°C• CE

The LB Series is a large high powered single flash xenon beacon with low power consumption. This range of beacons is available in Amber, Red, Blue and Green.

LB SeriesXenon Beacon

April 2013 Rev 1

INDUSTRIAL



BEACONS

LT SeriesLED Beacons

Models


PART NO. VOLTAGE AMPS @ 48V DC

AMPS @ 30V AC

COLOUR

30102170 10-100Vdc, 20-72Vac 77mA 270mA Clear

30102270 10-100Vdc, 20-72Vac 77mA 270mA Amber

30102370 10-100Vdc, 20-72Vac 77mA 270mA Red

30102470 10-100Vdc, 20-72Vac 77mA 270mA Blue

30102570 10-100Vdc, 20-72Vac 77mA 270mA Green

LP SeriesXenon Beacon

• Single Flash• Low current consumption• 360° Visibility• Voltage: 10-100Vdc and 20-72Vac• Operating temperature

-20°C to +50°C• 75FPM• High voltage transient and polarity reversal

protection fitted

• Polycarbonate base and lens • IP67 when installed correctly• CE

The LP is a low profile, single flash, 2 watt, xenon mini beacon. This range of beacons is suitable for forklift trucks, material handling, machine guard and warning, machine fault indication, process line status indication and automated door indicators. The LP Xenon is available in 5 colours.

45 mm

22.5 mm

3 X 5.5 mm holes

April 2013 Rev 1

INDUSTRIAL



BEACONS


Models


PART NO. VOLTAGE AMPS (Flashing)

AMPS (Constant)

COLOUR

30000160 10-100Vdc, 10-100Vac

110mA @ 12Vdc, 55mA @ 24Vdc, 35mA @ 50Vac, 25mA @ 100Vac


Clear

30000260 10-100Vdc, 10-100Vac



Amber

30000360 10-100Vdc, 10-100Vac



Red

30000460 10-100Vdc, 10-100Vac

110mA @ 12Vdc, 55mA @ 24Vdc, 35mA @ 50Vac, 25mA @100Vac


Blue

30000560 10-100Vdc, 10-100Vac



Green

LP SeriesLED Beacon

• 360° Visibility• Voltage: 10-100Vdc and 10-100Vac• Operating temperature

-20°C to +60°C• High voltage transient and polarity reversal

protection fitted

• Polycarbonate base and lens • IP67 when installed correctly• Reduced output ‘steady burn’ function• CE

The LP is a low profile LED mini beacon. This range of beacons is suitable for forklift trucks, material handling, machine guard and warning, machine fault indication, process line status indication and automated door indicators. The LP LED is available in 5 colours.

45 mm

22.5 mm

3 X 5.5 mm holes

April 2013 Rev 1

INDUSTRIAL



BEACONS


Models



AMPS (Constant)

COLOUR

466002 10-100Vac, 10-100Vdc



Amber

466003 10-100Vac, 10-100Vdc



Red

448002 110/230Vac 15mA @ 110Vac, 10mA @ 230Vac15mA @ 110Vac, 10mA @ 230Vac Amber

448003 110/230Vac 15mA @ 110Vac, 10mA @230Vac15mA @ 110Vac, 10mA @ 230Vac Red

LT SeriesLED Beacon

• Six Burst Flash• Low current consumption• 360° Visibility• 65-75 FPM• Flashing and continuously lit modes• Clear lens with coloured LEDs• Operating temperature


protection fitted


The LT is a low profile, compact, low power consumption, LED mini beacon. This beacon is suitable for forklift trucks, material handling, machine guard and warning, machine fault indication, process line status indication and automated door indicators. The LT LED is available in amber and red.

45 mm

22.5 mm

3 X 5.5 mm holes

April 2013 Rev 1

INDUSTRIAL



BEACONS


Models


PART NO. VOLTAGE AMPS @ 48V DC

AMPS @ 30V AC

COLOUR

31105170 10-100Vdc 20-72Vac 92mA 540mA Clear

31105270 10-100Vdc 20-72Vac 92mA 540mA Amber

31105370 10-100Vdc 20-72Vac 92mA 540mA Red

31105470 10-100Vdc 20-72Vac 92mA 540mA Blue

31105570 10-100Vdc 20-72Vac 92mA 540mA Green

LT SeriesXenon Beacon

• Single Flash• Voltage: 10-100Vdc and 20-72Vac• Operating temperature

-20°C to +50°C• 75FPM• All materials ROHS complaint • High voltage transient and polarity reversal

protection fitted


The LT is a low profile single flash, 5 watt, xenon mini beacon. This range of beacons are suitable for forklift trucks, material handling, machine guard and warning, machine fault indication, process line status indication and automated door indicators. The LT Xenon is available in 5 colours.

45 mm

22.5 mm

3 X 5.5 mm holes

April 2013 Rev 1

INDUSTRIAL



BEACONS


Models


PART NO. VOLTAGE AMPS (RED FLASHING)

AMPS (GREEN FLASHING)

COLOUR

446021 10-100Vdc



Red/Green

448021 85-265Vdc 15mA @ 110Vac, 10mA @ 230mA15mA @ 110Vac, 10mA @ 230Vac Red/Green

LT2 SeriesLED Beacon

• Six Burst Flash • A unique low cost alternative to conventional

tower beacons• Clear lens with coloured LEDs• Low power consumption• Operating temperature


protection fitted


The LT2 is a low profile, compact dual function LED mini beacon with green con-tinuous and red flashing light. Making this beacon ideal for indicating process/system status operations with the green continuous light for normal operation and red flashing light to indicate status change.

45 mm

22.5 mm

3 X 5.5 mm holes

April 2013 Rev 1

INDUSTRIAL



BEACONS

Models



428001 230Vac 5W 50mA Clear

428002 230Vac 5W 50mA Amber

428003 230Vac 5W 50mA Red

428004 230Vac 5W 50mA Blue

428005 230Vac 5W 50mA Green

428011 110Vac 5W 110mA Clear

428012 110Vac 5W 110mA Amber

428013 110Vac 5W 110mA Red

428014 110Vac 5W 110mA Blue

428015 110Vac 5W 110mA Green

• Single Flash• Polycarbonate lens and ABS base• High voltage transient and polarity reversal

protection fitted• Up to 4 beacons can be synchronised• Operating Temp: -20°C - +55°C• CE

The Mayday is a bright directional low profile single xenon beacon.

Mayday BeaconXenon Beacon

April 2013 Rev 1

INDUSTRIAL



BEACONS

Lenses


PART NO. LENS

425041 Clear

425042 Amber

425043 Red

425044 Blue

425045 Green

• Single Flash• High intensity xenon flash• Compact one piece housing • Small size makes it easy to install• Polycarbonate lens and ABS back box• High voltage transient and polarity reversal


The Microstrobe beacons are compact one peice housing and reliable high intensity xenon warning lights with polycarbonate lens unit and ABS back box. This range of beacons are simple to install in 22mm drilled hole plus keyway and available in a range of different colours.

Microstrobe

Lenses and drive units are sold separately

Drive Units

PART NO. VOLTAGE

425031 20-72Vac

429020 230Vac

429030 110Vac

Xenon Beacon

April 2013 Rev 1

INDUSTRIAL

Beacons │ Signal Towers


DIRECTIONAL LIGHTING


• Single Flash• Low power consumption• Acrylic lens and synthetic rubber base• High voltage transient and polarity reversal


The Ministrobe series are compact and reliable, low power consumption, xenon flasher units that include two assemblies; a drive module and a xenon lamp unit.This product is available in a range of different colours.

Ministrobe

Lenses

PART NO. LENS

571001 Clear

571002 Amber

571003 Red

571004 Blue

571005 Green

Lenses and drive units are sold separately

Drive Units

PART NO. VOLTAGE

471007 12V

471008 24V

Xenon Beacon

April 2013 Rev 1

INDUSTRIAL



BEACONS

Models


• Six Burst Flash• No moving parts• 360° Visibility• 65-75 FPM• Low power consumption• Compact Design• Polycarbonate lens and ABS base• High voltage transient and polarity reversal

protection fitted• Operating Temp: -20°C - +50°C• IP67 when installed correctly• CE

The RB Series LED are bright, compact, low consumption, low voltage beacons which are available in 5 colours.

RB SeriesLED Beacon


AMPS (Constant)

COLOUR

46801102 10-100Vac, 10-100Vdc



Clear

46801202 10-100Vac, 10-100Vdc



Amber

46801302 10-100Vac, 10-100Vdc



Red

46801402 10-100Vac, 10-100Vdc



Blue

46801502 10-100Vac, 10-100Vdc



Green

April 2013 Rev 1

INDUSTRIAL



BEACONS

Models



408021 110VAC 10W 130mA Clear

408022 110VAC 10W 130mA Amber

408023 110VAC 10W 130mA Red

408024 110VAC 10W 130mA Blue

408025 110VAC 10W 130mA Green

408051 230VAC 10W 70mA Clear

408052 230VAC 10W 70mA Amber

408053 230VAC 10W 70mA Red

408054 230VAC 10W 70mA Blue

408055 230VAC 10W 70mA Green

• Single Flash• No moving parts• Low power consumption• Compact Design• Polycarbonate lens and ABS base• High voltage transient and polarity reversal


The RB Series are bright single flash, compact, low consumption, low voltage and mains voltage beacons with a fast flash rate.

RB SeriesXenon Beacon

April 2013 Rev 1

INDUSTRIAL



BEACONS

Models


PART NO. VOLTAGE WATTS FLASH RATE COLOUR

420035 12/24V 2W 64FPM Amber

• Single Flash• Supplied with 12/24V charging lead, 230Vac

mains charging option• Polycarbonate lens and ABS base• High voltage transient and polarity reversal

protection fitted• Other Colour replacement lenses available• Operating Temp: -20°C - +50°C• CE

The Sentry is a compact, stand-alone, rechargeable battery powered xenon beacon with six hours flash time and is supplied with 12/24V charging lead.

Sentry BeaconXenon Beacon

April 2013 Rev 1

INDUSTRIAL

Beacons │ Directional Lighting


SIGNAL TOWERS

Models

Click and Fit

PART NO. OPERATING STATUS

VOLTAGE LENGTH LED COLOUR

DIS5213 Dangerous 85-275Vac 50mm Red

DIS5215 Abnormal 85-275Vac 50mm Yellow

DIS5212 Normal 85-275Vac 50mm Green

DIS5211 Discontinuity 85-275Vac 50mm Blue

DIS5214 Other 85-275Vac 50mm White

DIS5223 Dangerous 24Vdc 50mm Red

DIS5225 Abnormal 24Vdc 50mm Yellow

DIS5222 Normal 24Vdc 50mm Green

DIS5221 Discontinuity 24Vdc 50mm Blue

DIS5224 Other 24Vdc 50mm White

DIS7213 Dangerous 85-275Vac 70mm Red

DIS7215 Abnormal 85-275Vac 70mm Yellow

DIS7212 Normal 85-275Vac 70mm Green

DIS7211 Discontinuity 85-275Vac 70mm Blue

DIS7214 Other 85-275Vac 70mm White

DIS7223 Dangerous 24Vdc 70mm Red

DIS7225 Abnormal 24Vdc 70mm Yellow

DIS7222 Normal 24Vdc 70mm Green

DIS7221 Discontinuity 24Vdc 70mm Blue

DIS7224 Other 24Vdc 70mm White

• To lock, just twist clockwiose to align with the symbol, until it clicks into place

• To unlock, just twist anti-clockwise to align the with the symbol

The Stacker Lights unique modular stacker light system allows you to easily mount and replace LED modules. Supplied in the standard variety of colours: red, yellow, green, blue, and white, the modules clip together without the use of specialist tools or complicated wiring diagrams. All the benefits of LED lighting, long life, anti-shock, durability and low current draw make this stacker light range great value.

Stacker Lights - LED Modules

Continuous / Flashing Light

• Each light module has a manual switch to change between a continuous or flashing light

Easy Connection

• No need to wire the cable from the top light element to the base. Each light module comes with easy click and fit wiring

April 2013 Rev 1

INDUSTRIAL



SIGNAL TOWERS

Models

PART NO. SIZE MOUNT COLOUR

DIS5331 50mm 1 Bolt Black

DIS5332 50mm 1 Bolt White



DIS5311 50mm Side Mount Black

DIS5312 50mm Side Mount White

DIS5341 50mm Pole Mount Black

DIS5342 50mm Pole Mount White

DIS5321 50mm Adjustable Pole Black

DIS5322 50mm Adjustable Pole White





DIS7311 70mm Side Mount Black

DIS7312 70mm Side Mount White

DIS7341 70mm Pole Mount Black

DIS7342 70mm Pole Mount White

DIS7321 70mm Adjustable Pole Black

DIS7322 70mm Adjustable Pole White

Choose from 5 mounting options in either black or white with matching cap in 50mm or 70mm diameter. The easy to mount modular system means that you can clip and fit any of our modular lamps, alarms and buzzers to the base of your choice.

Stacker Lights - Bases

50mm Dimensions

70mm Dimensions

April 2013 Rev 1

INDUSTRIAL



SIGNAL TOWERS

Models


PART NO. SIZE COLOUR VOLTAGE VOLUME

DIS5111 50mm Black 85-275Vac 100dB

DIS5112 50mm White 85-275Vac 100dB

DIS5121 50mm Black 24Vdc 100dB

DIS5122 50mm White 24Vdc 100dB

DIS7111 70mm Black 85-275Vac 100dB

DIS7112 70mm White 85-275Vac 100dB

DIS7121 70mm Black 24Vdc 100dB

DIS7122 70mm White 24Vdc 100dB

DIS7121X 70mm Black 24Vdc 120dB

• All buzzers easily switchable between continuous or intermittent mode

• 60 - 80 beeps per minute• Just turn a switch on the unit to change

the volume on the adjustable volume buzzer up to 120dB

The Stacker Light range includes an adjustable buzzer for audio signalling. Which is available in both the 50mm and 70mm. The 100dB buzzer is switchable between a continous and intermittent alarm. Also available in the 70mm range is the high volume buzzer with an adjustable volume of up to 120dB.

Stacker Lights - Buzzer

April 2013 Rev 1

EL_Series_Delta_Design_A4LB_Beacon_Delta_Design_A4LP_Beacon-MV_Delta_A4LP_LED_Beacon_Delta_A4LT_Beacon_LED_Delta_A4LT_Beacon-MV_Delta_A4LT2_Beacon_LED_Delta_A4Mayday_Beacon_Delta_Design_A4Microstrobe_Delta_Design_A4Ministrobe_Delta_Design_A4RB_LED_Series_Delta_Design_A4RB_Series_Delta_Design_A4Sentry_Beacon_Delta_Design_A4Stacker Beacons_LED_Modules_Delta_Design_A4Stacker_Beacons_Bases_Delta_Design_A4Stacker_Beacons_Buzzer_Delta_Design_A4

Documents

EL Series - PakMarkas · • Polycarbonate lens and ABS base • High voltage transient and polarity reversal protection fitted • Operating Temp: -30°C - +55°C (-30°C lower limit