Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
EKS Series
BOLE The Passionate Pursuit of Perfection
www.boleamerica.com
BOLE Machinery Inc. ADD: 4706 Hudson Drive Stow, Oh 44224
Tel:(330) 983-4700
Email :[email protected]
EKS Hydraulic Servo Energy-Sav ing Injec t ion Molding Machine
THIS CATALOGUE ARE PROTECTED BY LAW OF COPY RIGHT. ANY USE WITHOUT THE EXPRESS PERMISSION OF THE LAW OF COPY RIGHT,
MUST GET APPROVAL OF BOLE IN ADVANCE.
THIS VERSION WAS PRINTED IN NOVEMBER 2019.
BOLE Injection Molding Machine
Version: 2020.01.01-US
. 01.
Excellent Stability BOLE has increased the structural rigidity of the EKS by 30% to provide greater stability during molding, especially of large molds
Accurate • BOLE's EKS provides precise mold open/close
positioning: +/- 0.5mm
• Injection positioning accuracy of+/- 0.2mm
Economical BOLE's central clamping toggle design saves 2-5% in material for 80% of our Customerscompared to traditional edge-clamping toggledesigns
Intelligent Networking Management System
• Designed for Industry 4.0 Intelligent Factories
• High-performance PLC obtains information from allsystems including robot, mold temperature controller,cooling, and machine accessories.
• Wireless network management system interacts with cellphones to display machine information, operational status,machine downtime, and product analysis at a glance.
• Orders dispatched via computer for greater productionefficiency, better production planning and operational control.
• EMS data exchange terminal makes it possible to automateevery machine line
. 02.
. 01.
Excellent Stability BOLE has increased the structural rigidity of the EKS by 30% to provide greater stability during molding, especially of large molds
Accurate • BOLE's EKS provides precise mold open/close
positioning: +/- 0.5mm
• Injection positioning accuracy of+/- 0.2mm
Economical BOLE's central clamping toggle design saves 2-5% in material for 80% of our Customerscompared to traditional edge-clamping toggledesigns
Intelligent Networking Management System
• Designed for Industry 4.0 Intelligent Factories
• High-performance PLC obtains information from allsystems including robot, mold temperature controller,cooling, and machine accessories.
• Wireless network management system interacts with cellphones to display machine information, operational status,machine downtime, and product analysis at a glance.
• Orders dispatched via computer for greater productionefficiency, better production planning and operational control.
• EMS data exchange terminal makes it possible to automateevery machine line
. 02.
Clamping Unit
. 03.
Toggle System Comparison:
No Platen deformation
Injection force
No Mold deformation Clamping force transmit
BOLE
BOLE Center Clamping Structure
• Provides I 00% clamping force efficiency
• 2-5% material savings• Reduces mold wear and eliminates platen deflection• Reduces the possibility of part flash, eliminating
secondary trim work
Platen deformation
Injection force
Mold deformation Clamping force transmit
Others
Traditional Toggle Systems
• 80-85% clamping force efficiency
• Platen deflection causes flash, waste of material andincreases labor costs to trim parts
Center-clamping Structure Obtained the National Invention Patent of China (Patent No.: ZL2011 10250342.5)
Newly designed EKS clamping structure offers improved rigidity for less platen deflection, less mold wear saving on mold maintenance
280-4000-ton clamping structure offersmore tie-bar spacing and has built-inclamping cylinder
Patented pneumatic fast-forced resetting connector makes assembly and disassembly easy; adaptable to all ejector types
Optimized platen structure means easy installation of ejector back rod
Unique Center Clamping Structure designed to increase overall structural rigidity by 30%
' I • ,, I I' 8,
, .., ' I I
.;' I I ' • . '
Innovative Toggle structure offers greater machine stability, faster speed and shorter dry-cycle times.
Moving platen support structure for I 00-470-ton presses uses a linear guide without lubrication rather than tie-bars to keep the mold area clean for clean-room use
550-ton and above offers a non-slip foot designto increase machine stability for greater reliabilitywhen using large molds
. 04 .
Clamping Unit
. 03.
Toggle System Comparison:
No Platen deformation
Injection force
No Mold deformation Clamping force transmit
BOLE
BOLE Center Clamping Structure
• Provides I 00% clamping force efficiency
• 2-5% material savings• Reduces mold wear and eliminates platen deflection• Reduces the possibility of part flash, eliminating
secondary trim work
Platen deformation
Injection force
Mold deformation Clamping force transmit
Others
Traditional Toggle Systems
• 80-85% clamping force efficiency
• Platen deflection causes flash, waste of material andincreases labor costs to trim parts
Center-clamping Structure Obtained the National Invention Patent of China (Patent No.: ZL2011 10250342.5)
Newly designed EKS clamping structure offers improved rigidity for less platen deflection, less mold wear saving on mold maintenance
280-4000-ton clamping structure offersmore tie-bar spacing and has built-inclamping cylinder
Patented pneumatic fast-forced resetting connector makes assembly and disassembly easy; adaptable to all ejector types
Optimized platen structure means easy installation of ejector back rod
Unique Center Clamping Structure designed to increase overall structural rigidity by 30%
' I • ,, I I' 8,
, .., ' I I
.;' I I ' • . '
Innovative Toggle structure offers greater machine stability, faster speed and shorter dry-cycle times.
Moving platen support structure for I 00-470-ton presses uses a linear guide without lubrication rather than tie-bars to keep the mold area clean for clean-room use
550-ton and above offers a non-slip foot designto increase machine stability for greater reliabilitywhen using large molds
. 04 .
. 05.
All BOLE series injector units can be fit with A\B\C screw, with L/D ratio of 23: I to achieve optimum plasticizing with greater efficiency
Plasticizing unit design of German
Plasticizing unit design offers German Engineering offering efficiencies in excess of 20% of competing plasticizing units
An upgraded module design with high rigidity at the injection seat, with a linear guide supporting structure
Enhanced cooling ring for the barrel offers better temperature control and charge efficiency
New injection cylinder offers lower injection offers less back resistance
Stronger charge unit offers greater stability and longer life
\ • German-designed screws are custom-made to meetcomplex technical requirements for special plasticizingsystems
• All series can be outfitted with A\B\C screws to achieveoptimum plasticizing efficiency
Compatible injection base for three different models
. 06.
. 05.
All BOLE series injector units can be fit with A\B\C screw, with L/D ratio of 23: I to achieve optimum plasticizing with greater efficiency
Plasticizing unit design of German
Plasticizing unit design offers German Engineering offering efficiencies in excess of 20% of competing plasticizing units
An upgraded module design with high rigidity at the injection seat, with a linear guide supporting structure
Enhanced cooling ring for the barrel offers better temperature control and charge efficiency
New injection cylinder offers lower injection offers less back resistance
Stronger charge unit offers greater stability and longer life
\ • German-designed screws are custom-made to meetcomplex technical requirements for special plasticizingsystems
• All series can be outfitted with A\B\C screws to achieveoptimum plasticizing efficiency
Compatible injection base for three different models
. 06.
Machine comes standard with one set of valve-gated manifold for fast combination
. 07.
Special hydraulic system for clamping with patented software algorithms for greater position accuracy of=/- 0.5 mm
Non-welded hydraulic pipe system means solid structure with no leakage problems
A low momentum servo system offers quick response time (30-50 milliseconds); system pressure rises to I 7.5Mga. Injection pressure and speed are greatly increased for faster cycle times
Oil temperature auto-control systems means less cooling water required and more stability in the machine .
. 08.
Machine comes standard with one set of valve-gated manifold for fast combination
. 07.
Special hydraulic system for clamping with patented software algorithms for greater position accuracy of=/- 0.5 mm
Non-welded hydraulic pipe system means solid structure with no leakage problems
A low momentum servo system offers quick response time (30-50 milliseconds); system pressure rises to I 7.5Mga. Injection pressure and speed are greatly increased for faster cycle times
Oil temperature auto-control systems means less cooling water required and more stability in the machine .
. 08.
Intelligent Software Design
KEBA controller
. 09.
• Be ready for Industry 4.0 with BOLE's new IntelligentNetworking Management System
• Greater accuracy can be achieved with the intelligentcontrol software of Mold Open Positioning providingan accuracy of +/-0.Smm with a BOLE EKS injectionmolding machine
• Integrated with the patented control software forIntelligent Injection Process Compensation, accuracyin repeatability can be achieved
• BOLE's EKS comes equipped with 1/0 safety notice toprevent short-circuits
• Electrical components offer the engineering expertiseof vendors including Schneider Electric, Eaton, ABBand Fuji to ensure the highest-quality components forlonger service life
• Independent wiring layout with anti-interference alongwith an independent control box offers easy installation,and convenience for repair
Intelligent Networking Management System March into industry 4.0 ,opening a new era of intelligent factories
Cell phone terminal
PC terminal
Communication module
Machine
Machine
◄···■--►
ilink
Data interaction I- - - - - - - � I - - - - - - ., I - - - - - - .,i■-------■1 Robot I I Mold temperature I I Cooling water :
1 _______ J 1 __ c�n�o�e,'.:_ _ � 1 _______ J
Data interaction I- - - - - - - � I - - - - - - ., I - - - - - - �1■-------■1 Robot I I Dryer : I •,, , , ,
I _______ J I _______ J I _______ �
The high performance PLC of the BOLE EKS injection molding machine captures the information of the robotics, mold temperature controller, cooling system and other machine accessories. A wireless network management system provides data interaction so that information can be obtained through PC or cell phone for checking processing parameters and operation status remotely. It also offers machine failure incidents as well as product analysis at a glance for better production efficiencies, product planning and scheduling. BOLE provides EMS data exchange terminal making it possible to implement automation through the entire factory for true Industry 4.0 manufacturing .
. 10.
Intelligent Software Design
KEBA controller
. 09.
• Be ready for Industry 4.0 with BOLE's new IntelligentNetworking Management System
• Greater accuracy can be achieved with the intelligentcontrol software of Mold Open Positioning providingan accuracy of +/-0.Smm with a BOLE EKS injectionmolding machine
• Integrated with the patented control software forIntelligent Injection Process Compensation, accuracyin repeatability can be achieved
• BOLE's EKS comes equipped with 1/0 safety notice toprevent short-circuits
• Electrical components offer the engineering expertiseof vendors including Schneider Electric, Eaton, ABBand Fuji to ensure the highest-quality components forlonger service life
• Independent wiring layout with anti-interference alongwith an independent control box offers easy installation,and convenience for repair
Intelligent Networking Management System March into industry 4.0 ,opening a new era of intelligent factories
Cell phone terminal
PC terminal
Communication module
Machine
Machine
◄···■--►
ilink
Data interaction I- - - - - - - � I - - - - - - ., I - - - - - - .,i■-------■1 Robot I I Mold temperature I I Cooling water :
1 _______ J 1 __ c�n�o�e,'.:_ _ � 1 _______ J
Data interaction I- - - - - - - � I - - - - - - ., I - - - - - - �1■-------■1 Robot I I Dryer : I •,, , , ,
I _______ J I _______ J I _______ �
The high performance PLC of the BOLE EKS injection molding machine captures the information of the robotics, mold temperature controller, cooling system and other machine accessories. A wireless network management system provides data interaction so that information can be obtained through PC or cell phone for checking processing parameters and operation status remotely. It also offers machine failure incidents as well as product analysis at a glance for better production efficiencies, product planning and scheduling. BOLE provides EMS data exchange terminal making it possible to implement automation through the entire factory for true Industry 4.0 manufacturing .
. 10.
Technical Data Descri tion Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
Theoretical shot volume
Maximum shot weight ( PS)
Injection rate into the air
mm
in
cu in
oz
cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure
Screw stroke
Max. injection speed
Max. Screw speed
General
System Pressure
Pump Motor
Heater power
psi
in
in/s
r/min
psi
kw
kw
Number of temp. control zones t:t
Oil tank capacity us gal
Machine dimensions (LXWX H) ftXftXft
Machine weight lbs
28
1 .1 0
20
6.76
3.60
4.78
2.52
45324
5.8
BL I 00EKS/ C340
16.54
30.71
3.94
3.8
340
32 36
1.26 1.42
23 23
8.83 11 .17
4.70 5.95
6.25 7.91
3.29 4.17
34701 27418
7.09
5.02
280
13.4
6.8 7.9
110
14.17
16.1x14.2
23.2 X 21.3
6.30
2.5
5
40 32
1.57 1.26
23 20
13.80 9.81
7.35 5.23
9.76 6.41
5.14 3.38
22209 42261
9
2538
3+1
40
7.8
15.1 x4.6x7.2
8157
. I I. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
BL I 00EKS/C460
16.54
16.54
3.94
3.8
460
36 40
1.42 1.57
23 23
12.42 15.33
6.61 8.17
8.12 10.02
4.28 5.28
33392 27047
7.87
5.15
250
16.4
8.8 10
BL I 40EKS/C340 BL I 40EKS/C460 BL I 40EKS/C630 BL I 70EKS/C460
154 187
16.54 18.90
18.1x16.1 20.1x16.1
26.0 X 24.0 29.5x27.6
7.09 7.87
18.50 18.50 18.50 20.87
35.04 18.50 18.50 39.76
5.12 5.12 5.12 5.91
5.5 5.5 5.5 5.5
4.2 4.2
5 5
340 460 630 460
45 28 32 36 40 32 36 40 45 36 40 45 50 32 36 40 45
1.77 1 .1 0 1.26 1.42 1.57 1.26 1.42 1.57 1.77 1.42 1.57 1.77 1.97 1.26 1.42 1.57 1.77
23 20 23 23 23 20 23 23 23 20 23 23 23 20 23 23 23
19.40 6.76 8.83 11.17 13.80 9.81 12.42 15.33 19.40 13.97 17.25 21.83 26.95 9.81 12.42 15.33 19.40
10.34 3.60 4.70 5.95 7.35 5.23 6.61 8.17 10.34 7.44 9.19 11.63 14.35 5.23 6.61 8.17 10.34
12.68 5.98 7 .81 9.89 12.20 6.41 8.12 10.02 12.68 6.95 8.58 10.85 13.40 6.41 8.12 10.02 12.68
6.68 3.15 4.12 5.21 6.43 3.38 4.28 5.28 6.68 3.66 4.52 5.72 7.06 3.38 4.28 5.28 6.68
21371 45324 34701 27418 22209 42261 33392 27047 21371 39953 32362 25570 20711 42261 33392 27047 21371
11 .3 5.8
7.09
6.27
280
6.8 7.9 9 7.8
16.4x4.9x7.5
7.87
5.15
250
2538
16.4
8.8
3+ 1
48
9921
10 11.3 11.2 12
8.86
4.40
300
13.2 14.4 7.8
17.4x4.9x7.5
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice .
7.87
5.15
250
2538
16.4
8.8
3+ 1
10
61
18.4x5.2x7.5
14330
11 .3
. 12.
Technical Data Descri tion Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
Theoretical shot volume
Maximum shot weight ( PS)
Injection rate into the air
mm
in
cu in
oz
cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure
Screw stroke
Max. injection speed
Max. Screw speed
General
System Pressure
Pump Motor
Heater power
psi
in
in/s
r/min
psi
kw
kw
Number of temp. control zones t:t
Oil tank capacity us gal
Machine dimensions (LXWX H) ftXftXft
Machine weight lbs
28
1 .1 0
20
6.76
3.60
4.78
2.52
45324
5.8
BL I 00EKS/ C340
16.54
30.71
3.94
3.8
340
32 36
1.26 1.42
23 23
8.83 11 .17
4.70 5.95
6.25 7.91
3.29 4.17
34701 27418
7.09
5.02
280
13.4
6.8 7.9
110
14.17
16.1x14.2
23.2 X 21.3
6.30
2.5
5
40 32
1.57 1.26
23 20
13.80 9.81
7.35 5.23
9.76 6.41
5.14 3.38
22209 42261
9
2538
3+1
40
7.8
15.1 x4.6x7.2
8157
. I I. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
BL I 00EKS/C460
16.54
16.54
3.94
3.8
460
36 40
1.42 1.57
23 23
12.42 15.33
6.61 8.17
8.12 10.02
4.28 5.28
33392 27047
7.87
5.15
250
16.4
8.8 10
BL I 40EKS/C340 BL I 40EKS/C460 BL I 40EKS/C630 BL I 70EKS/C460
154 187
16.54 18.90
18.1x16.1 20.1x16.1
26.0 X 24.0 29.5x27.6
7.09 7.87
18.50 18.50 18.50 20.87
35.04 18.50 18.50 39.76
5.12 5.12 5.12 5.91
5.5 5.5 5.5 5.5
4.2 4.2
5 5
340 460 630 460
45 28 32 36 40 32 36 40 45 36 40 45 50 32 36 40 45
1.77 1 .1 0 1.26 1.42 1.57 1.26 1.42 1.57 1.77 1.42 1.57 1.77 1.97 1.26 1.42 1.57 1.77
23 20 23 23 23 20 23 23 23 20 23 23 23 20 23 23 23
19.40 6.76 8.83 11.17 13.80 9.81 12.42 15.33 19.40 13.97 17.25 21.83 26.95 9.81 12.42 15.33 19.40
10.34 3.60 4.70 5.95 7.35 5.23 6.61 8.17 10.34 7.44 9.19 11.63 14.35 5.23 6.61 8.17 10.34
12.68 5.98 7 .81 9.89 12.20 6.41 8.12 10.02 12.68 6.95 8.58 10.85 13.40 6.41 8.12 10.02 12.68
6.68 3.15 4.12 5.21 6.43 3.38 4.28 5.28 6.68 3.66 4.52 5.72 7.06 3.38 4.28 5.28 6.68
21371 45324 34701 27418 22209 42261 33392 27047 21371 39953 32362 25570 20711 42261 33392 27047 21371
11 .3 5.8
7.09
6.27
280
6.8 7.9 9 7.8
16.4x4.9x7.5
7.87
5.15
250
2538
16.4
8.8
3+ 1
48
9921
10 11.3 11.2 12
8.86
4.40
300
13.2 14.4 7.8
17.4x4.9x7.5
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice .
7.87
5.15
250
2538
16.4
8.8
3+ 1
10
61
18.4x5.2x7.5
14330
11 .3
. 12.
Technical Data Descri tion Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed ___
r/min
General
System Pressure
Pump Motor
Heater power
Number of temp. control zones
Oil tank capacity
psi
kw
kw
t:t
us gal
Machine dimensions (LXWX H) ftXftXft
Machine weight lbs
36
1.42
20
13.97
7.44
6.95
3.66
39953
11 .2
BL I 70EKS/C630
630
40 45
1.57 1.77
23 23
17.25 21 .83
9.19 11 .63
8.58 10.85
4.52 5.72
32362 25570
12
8.86
4.40
300
2538
16.4
3+1
13.2
18.4x5.2x7.5
187
18.90
20.1x16.1
29.5 X 27.6
7.87
20.87
39.76
5.91
5.5
4.2
5
50 40
1.97 1.57
23 20
26.95 19.16
14.35 1 0.21
13.40 8.49
7.06 4.48
20711 40214
14.4 11 .4
61
14330
. 13. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
BL I 70EKS/C860
860
45 50
1.77 1.97
23 23
24.25 29.94
12.92 15.95
10.75 13.27
5.66 6.99
31774 25737
9.84
13
4.36
300
2538
20.5
4+1
14.6
19.4x5.2x7.5
55
2.17
23
36.23
19.30
16.06
8.46
21270
16.2
BL230EKS/C630 BL230EKS/C860 BL230EKS/C 1450
254
20.87
22x20.1
32.3 X 30.3
8.66
22.83
43.70
5.91
7.5
4.4
9
630 860 1450
36 40 45 50 40 45 50 55 50 55 60 65
1.42 1.57 1.77 1 .97 1.57 1.77 1.97 2.17 1.97 2.17 2.36 2.56
20 23 23 23 20 23 23 23 20 23 23 23
13.97 17.25 21.83 26.95 19.16 24.25 29.94 36.23 34.73 42.02 50.01 58.69
7.44 9.19 11 .63 14.35 10.21 12.92 15.95 19.30 18.50 22.39 26.64 31.27
8.55 10.55 13.36 16.49 8.49 10.75 13.27 16.06 11 .69 14.14 16.83 19. 75
4.50 5.56 7.04 8.69 4.48 5.66 6.99 8.46 6.16 7.45 8.87 10.41
39953 32362 25570 20711 40214 31774 25737 21270 37108 30668 25769 21957
8.86 9.84 11 .42
5.42 4.36 3.84
300 300 260
2538
20.5 26.7
11 .2 12 13.2 14.4 11 .4 13 14.6 16.2 18.5 18.5 21 23
3+1 4+1
74
19.4x5.6x7.9 21.0x5.6x7.9
15432
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice . . 14.
Technical Data Descri tion Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed ___
r/min
General
System Pressure
Pump Motor
Heater power
Number of temp. control zones
Oil tank capacity
psi
kw
kw
t:t
us gal
Machine dimensions (LXWX H) ftXftXft
Machine weight lbs
36
1.42
20
13.97
7.44
6.95
3.66
39953
11 .2
BL I 70EKS/C630
630
40 45
1.57 1.77
23 23
17.25 21 .83
9.19 11 .63
8.58 10.85
4.52 5.72
32362 25570
12
8.86
4.40
300
2538
16.4
3+1
13.2
18.4x5.2x7.5
187
18.90
20.1x16.1
29.5 X 27.6
7.87
20.87
39.76
5.91
5.5
4.2
5
50 40
1.97 1.57
23 20
26.95 19.16
14.35 1 0.21
13.40 8.49
7.06 4.48
20711 40214
14.4 11 .4
61
14330
. 13. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
BL I 70EKS/C860
860
45 50
1.77 1.97
23 23
24.25 29.94
12.92 15.95
10.75 13.27
5.66 6.99
31774 25737
9.84
13
4.36
300
2538
20.5
4+1
14.6
19.4x5.2x7.5
55
2.17
23
36.23
19.30
16.06
8.46
21270
16.2
BL230EKS/C630 BL230EKS/C860 BL230EKS/C 1450
254
20.87
22x20.1
32.3 X 30.3
8.66
22.83
43.70
5.91
7.5
4.4
9
630 860 1450
36 40 45 50 40 45 50 55 50 55 60 65
1.42 1.57 1.77 1 .97 1.57 1.77 1.97 2.17 1.97 2.17 2.36 2.56
20 23 23 23 20 23 23 23 20 23 23 23
13.97 17.25 21.83 26.95 19.16 24.25 29.94 36.23 34.73 42.02 50.01 58.69
7.44 9.19 11 .63 14.35 10.21 12.92 15.95 19.30 18.50 22.39 26.64 31.27
8.55 10.55 13.36 16.49 8.49 10.75 13.27 16.06 11 .69 14.14 16.83 19. 75
4.50 5.56 7.04 8.69 4.48 5.66 6.99 8.46 6.16 7.45 8.87 10.41
39953 32362 25570 20711 40214 31774 25737 21270 37108 30668 25769 21957
8.86 9.84 11 .42
5.42 4.36 3.84
300 300 260
2538
20.5 26.7
11 .2 12 13.2 14.4 11 .4 13 14.6 16.2 18.5 18.5 21 23
3+1 4+1
74
19.4x5.6x7.9 21.0x5.6x7.9
15432
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice . . 14.
Technical Data Descri tion Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed __
r/min
General
System Pressure
Pump Motor
Heater power
psi
kw
kw
Number of temp. control zones t:t
Oil tank capacity us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
40
1.57
20
19.16
10.21
10.78
5.68
40214
11 .4
BL280EKS/C860
860
45 50 55 50
1.77 1.97 2.17 1.97
23 23 23 20
24.25 29.94 36.23 34.73
12.92 15.95 19.30 18.50
13.65 16.85 20.39 11 . 71
7.19 8.88 10.74 6.14
31774 25737 21270 37108
9.84
5.54
300
26.7
13 14.6 16.2 18.5
21.7x5.9x7.9
. 15. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
BL280EKS/C 1450
309
22.83
26 X 24
36.2 X 34.3
9.45
26.77
49.61
7.48
7.6
4.9
13
1450
55 60 65
2.17 2.36 2.56
23 23 23
42.02 50.01 58.69
22.39 26.64 31.27
14.16 16.84 19.77
7.44 8.85 10.41
30668 25769 21957
11.42
3.86
260
2538
18.5 21 23
4+1
92
19842
BL280EKS/C2050 BL350EKS/C 1450 BL350EKS/C2050
386
25.98
28 X 26
39.4 X 37 .4
10.63
28.35
54.33
7.48
7.6
4.9
13
2050 1450 2050
60 65 75 80 50 55 60 65 60 65 75 80
2.36 2.56 2.95 3.15 1.97 2.17 2.36 2.56 2.36 2.56 2.95 3.15
23 23 23 21 .3 20 23 23 23 23 23 23 21.3
56.05 65.78 87.57 99.64 34.73 42.02 50.01 58.69 56.05 65.78 87.57 99.64
29.86 35.04 46.65 53.08 18.50 22.39 26.64 31.27 29.86 35.04 46.65 53.08
16.52 19.39 25.81 29.36 14.61 17 .68 21.04 24.69 16.52 19.39 25.81 29.36
8.70 10.21 13.60 15.47 7.70 9.31 11 .09 13.01 8.70 10.21 13.60 15.47
32820 27965 21005 18461 37108 30668 25769 21957 32820 27965 21005 18461
12.80 11 .42 12.80
3.77 4.80 3.77
200 260 200
2538
40.9 40.9
21.8 24 26.2 26.2 18.5 18.5 21 23 21.8 24 26.2 26.2
4+1
111
23.3 X 5.9 X 7.9 24.3 X 6.6 X 8.2
27558
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice . . 16.
Technical Data Descri tion Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed __
r/min
General
System Pressure
Pump Motor
Heater power
psi
kw
kw
Number of temp. control zones t:t
Oil tank capacity us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
40
1.57
20
19.16
10.21
10.78
5.68
40214
11 .4
BL280EKS/C860
860
45 50 55 50
1.77 1.97 2.17 1.97
23 23 23 20
24.25 29.94 36.23 34.73
12.92 15.95 19.30 18.50
13.65 16.85 20.39 11 . 71
7.19 8.88 10.74 6.14
31774 25737 21270 37108
9.84
5.54
300
26.7
13 14.6 16.2 18.5
21.7x5.9x7.9
. 15. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
BL280EKS/C 1450
309
22.83
26 X 24
36.2 X 34.3
9.45
26.77
49.61
7.48
7.6
4.9
13
1450
55 60 65
2.17 2.36 2.56
23 23 23
42.02 50.01 58.69
22.39 26.64 31.27
14.16 16.84 19.77
7.44 8.85 10.41
30668 25769 21957
11.42
3.86
260
2538
18.5 21 23
4+1
92
19842
BL280EKS/C2050 BL350EKS/C 1450 BL350EKS/C2050
386
25.98
28 X 26
39.4 X 37 .4
10.63
28.35
54.33
7.48
7.6
4.9
13
2050 1450 2050
60 65 75 80 50 55 60 65 60 65 75 80
2.36 2.56 2.95 3.15 1.97 2.17 2.36 2.56 2.36 2.56 2.95 3.15
23 23 23 21 .3 20 23 23 23 23 23 23 21.3
56.05 65.78 87.57 99.64 34.73 42.02 50.01 58.69 56.05 65.78 87.57 99.64
29.86 35.04 46.65 53.08 18.50 22.39 26.64 31.27 29.86 35.04 46.65 53.08
16.52 19.39 25.81 29.36 14.61 17 .68 21.04 24.69 16.52 19.39 25.81 29.36
8.70 10.21 13.60 15.47 7.70 9.31 11 .09 13.01 8.70 10.21 13.60 15.47
32820 27965 21005 18461 37108 30668 25769 21957 32820 27965 21005 18461
12.80 11 .42 12.80
3.77 4.80 3.77
200 260 200
2538
40.9 40.9
21.8 24 26.2 26.2 18.5 18.5 21 23 21.8 24 26.2 26.2
4+1
111
23.3 X 5.9 X 7.9 24.3 X 6.6 X 8.2
27558
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice . . 16.
Technical Data Descri tion Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed __
r/min
General
System Pressure
Pump Motor
Heater power
Number of temp. control zones
Oil tank capacity
psi
kw
kw
t:t
us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
70
2.76
23
86.85
46.27
22.02
11.60
30769
27
BLlS0EKS/Cl000
386
25.98
28 X 26
39.4 X 37 .4
10.63
28.35
54.33
7.48
7.6
4.9
13
3000
75 85
2.95 3.35
23 23
99.70 128.06
53.11 68.22
25.28 32.47
13.32 1 7. 11
26803 20867
14.57
29.2
3.69
230
2538
50.7
4+1
111
31.4
25.6 X 6.6 X 8.2
27558
90
3.54
21.5
143.57
76.48
36.41
19.18
18613
31.4
. 17. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
BL470EKS/C2050
2050
60 65 75
2.36 2.56 2.95
23 23 23
56.05 65.78 87.57
29.86 35.04 46.65
20.65 24.23 32.26
10.88 12.77 17.00
32820 27965 21005
12.80
4.71
200
21.8 24 26.2
BL470EKS/Cl000 BL470EKS/Cl700
518
29.53
31.9 X 29.9
44.9 X 41.7
11 .81
32.28
61 .81
8.27
13.0
8.1
1 7
3000 3700
80 70 75 85 90 75 80 90 95 70
3.15 2.76 2.95 3.35 3.54 2.95 3.15 3.54 3.74 2.76
21.3 23 23 23 21.5 23 23 23 21 .7 23
99.64 86.85 99.70 128.06 143.57 111 . 83 127 .23 161.03 179.42 86.85
53.08 46.27 53.11 68.22 76.48 59.57 67.78 85.78 95.58 46.27
36.71 22.02 25.28 32.47 36.41 27.49 31.28 39.59 44.11 26.43
19.34 11 .60 13.32 17 .11 19.18 14.49 16.48 20.86 23.24 13.93
18461 30769 26803 20867 18613 29578 25996 20540 18435 30769
14.57 16.34
3.69 4.02
230 200
2538
50.7 40.9+16.4
26.2 27 29.2 31.4 31.4 32 35.5 37.5 37.5 27
4+1 5+1
132
26.6 X 7.2 X 8.2 28.2 X 7.2 X 8.2
35274
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice .
BLSS0EKS/C2950
606
33.46
33.9 X 31.5
47.2 X 44.9
13.78
34.65
68.11
8.66
13.0
8.1
17
2950
75 85
2.95 3.35
23 23
99.70 128.06
53.11 68.22
30.34 38.97
15.99 20.53
26803 20867
14.57
4.43
250
2538
40.9+16.4
29.2
4+1
198
31.4
29.5 X 7.5 X 9.5
44092
90
3.54
21.5
143.57
76.48
43.69
23.02
18613
31.4
. 18.
Technical Data Descri tion Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed __
r/min
General
System Pressure
Pump Motor
Heater power
Number of temp. control zones
Oil tank capacity
psi
kw
kw
t:t
us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
70
2.76
23
86.85
46.27
22.02
11.60
30769
27
BLlS0EKS/Cl000
386
25.98
28 X 26
39.4 X 37 .4
10.63
28.35
54.33
7.48
7.6
4.9
13
3000
75 85
2.95 3.35
23 23
99.70 128.06
53.11 68.22
25.28 32.47
13.32 1 7. 11
26803 20867
14.57
29.2
3.69
230
2538
50.7
4+1
111
31.4
25.6 X 6.6 X 8.2
27558
90
3.54
21.5
143.57
76.48
36.41
19.18
18613
31.4
. 17. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
BL470EKS/C2050
2050
60 65 75
2.36 2.56 2.95
23 23 23
56.05 65.78 87.57
29.86 35.04 46.65
20.65 24.23 32.26
10.88 12.77 17.00
32820 27965 21005
12.80
4.71
200
21.8 24 26.2
BL470EKS/Cl000 BL470EKS/Cl700
518
29.53
31.9 X 29.9
44.9 X 41.7
11 .81
32.28
61 .81
8.27
13.0
8.1
1 7
3000 3700
80 70 75 85 90 75 80 90 95 70
3.15 2.76 2.95 3.35 3.54 2.95 3.15 3.54 3.74 2.76
21.3 23 23 23 21.5 23 23 23 21 .7 23
99.64 86.85 99.70 128.06 143.57 111 . 83 127 .23 161.03 179.42 86.85
53.08 46.27 53.11 68.22 76.48 59.57 67.78 85.78 95.58 46.27
36.71 22.02 25.28 32.47 36.41 27.49 31.28 39.59 44.11 26.43
19.34 11 .60 13.32 17 .11 19.18 14.49 16.48 20.86 23.24 13.93
18461 30769 26803 20867 18613 29578 25996 20540 18435 30769
14.57 16.34
3.69 4.02
230 200
2538
50.7 40.9+16.4
26.2 27 29.2 31.4 31.4 32 35.5 37.5 37.5 27
4+1 5+1
132
26.6 X 7.2 X 8.2 28.2 X 7.2 X 8.2
35274
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice .
BLSS0EKS/C2950
606
33.46
33.9 X 31.5
47.2 X 44.9
13.78
34.65
68.11
8.66
13.0
8.1
17
2950
75 85
2.95 3.35
23 23
99.70 128.06
53.11 68.22
30.34 38.97
15.99 20.53
26803 20867
14.57
4.43
250
2538
40.9+16.4
29.2
4+1
198
31.4
29.5 X 7.5 X 9.5
44092
90
3.54
21.5
143.57
76.48
43.69
23.02
18613
31.4
. 18.
Technical Data Descri tion Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed __
r/min
General
System Pressure
Pump Motor
Heater power
psi
kw
kw
Number of temp. control zones t:t
Oil tank capacity us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
75
2.95
23
111 .8
59.57
27.49
14.49
29578
32
BLSS0EKS/C3700
606
33.46
33.9 X 31.5
47 .2 X 44.9
13.78
34.65
68.11
8.66
13.0
8.1
1 7
3700
80 90 95 80
3.15 3.54 3.74 3.15
23 23 21.7 23
127.2 161 .0 179.4 139.5
67.78 85.78 95.58 74.31
31.28 39.59 44.11 31 .15
16.48 20.86 23.24 16.41
25996 20540 18435 30458
16.34
4.02
200
2538
40.9+16.4
35.5 37.5 37.5 36
5+1
198
29.5x7.5x9.5
44092
. 19. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
BLSS0EKS/C4800
4800
85 90 100
3.35 3.54 3.94
23 23 20.7
157.5 176.5 218.0
83.89 94.05 116.11
35.16 39.42 48.67
18.53 20.77 25.64
26980 24066 19493
17 .91
4.00
220
50.7+16.4
38.3 40.6 40.6
30.2 X 7.5 X 9.5
BL650EKS/C3700
3700
75 80 90 95 80
2.95 3.15 3.54 3.74 3.15
23 23 23 21.7 23
111 .8 127.2 161.0 179.4 139.5
59.57 67.78 85.78 95.58 74.31
32.07 36.49 46.19 51.46 31 .15
16.90 19.23 24.34 27.12 16.41
29578 25996 20540 18435 30458
16.34
4.69
200
50.7+16.4
32 35.5 37.5 37.5 36
31.8 X 7.9 X 9.8
BL650EKS/C4800
716
37.40
37.8x33.9
52.6 X 48.6
15.75
39.37
76.77
9.45
17.3
12.4
21
4800
85 90
3.35 3.54
23 23
157.5 176.5
83.89 94.05
35.16 39.42
18.53 20.77
26980 24066
17 .91
38.3
4.00
220
2538
5+1
225
55116
40.6
100 80
3.94 3.15
20.7 23
218.0 153.3
116.11 81.66
48.67 33.36
25.64 17.58
19493 33313
40.6 43
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice .
BL650EKS/C5900
5900
90 100 11 0
3.54 3.94 4.33
23 23 21
194.0 239.5 289.8
103.35 127.60 154.39
42.22 52.12 63.07
22.25 27.47 33.23
26322 21321 17620
19.69
4.28
224
50.7+26.7
48.5 54 59.5
33.1 x7.9x9.8
. 20.
Technical Data Descri tion Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed __
r/min
General
System Pressure
Pump Motor
Heater power
psi
kw
kw
Number of temp. control zones t:t
Oil tank capacity us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
75
2.95
23
111 .8
59.57
27.49
14.49
29578
32
BLSS0EKS/C3700
606
33.46
33.9 X 31.5
47 .2 X 44.9
13.78
34.65
68.11
8.66
13.0
8.1
1 7
3700
80 90 95 80
3.15 3.54 3.74 3.15
23 23 21.7 23
127.2 161 .0 179.4 139.5
67.78 85.78 95.58 74.31
31.28 39.59 44.11 31 .15
16.48 20.86 23.24 16.41
25996 20540 18435 30458
16.34
4.02
200
2538
40.9+16.4
35.5 37.5 37.5 36
5+1
198
29.5x7.5x9.5
44092
. 19. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
BLSS0EKS/C4800
4800
85 90 100
3.35 3.54 3.94
23 23 20.7
157.5 176.5 218.0
83.89 94.05 116.11
35.16 39.42 48.67
18.53 20.77 25.64
26980 24066 19493
17 .91
4.00
220
50.7+16.4
38.3 40.6 40.6
30.2 X 7.5 X 9.5
BL650EKS/C3700
3700
75 80 90 95 80
2.95 3.15 3.54 3.74 3.15
23 23 23 21.7 23
111 .8 127.2 161.0 179.4 139.5
59.57 67.78 85.78 95.58 74.31
32.07 36.49 46.19 51.46 31 .15
16.90 19.23 24.34 27.12 16.41
29578 25996 20540 18435 30458
16.34
4.69
200
50.7+16.4
32 35.5 37.5 37.5 36
31.8 X 7.9 X 9.8
BL650EKS/C4800
716
37.40
37.8x33.9
52.6 X 48.6
15.75
39.37
76.77
9.45
17.3
12.4
21
4800
85 90
3.35 3.54
23 23
157.5 176.5
83.89 94.05
35.16 39.42
18.53 20.77
26980 24066
17 .91
38.3
4.00
220
2538
5+1
225
55116
40.6
100 80
3.94 3.15
20.7 23
218.0 153.3
116.11 81.66
48.67 33.36
25.64 17.58
19493 33313
40.6 43
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice .
BL650EKS/C5900
5900
90 100 11 0
3.54 3.94 4.33
23 23 21
194.0 239.5 289.8
103.35 127.60 154.39
42.22 52.12 63.07
22.25 27.47 33.23
26322 21321 17620
19.69
4.28
224
50.7+26.7
48.5 54 59.5
33.1 x7.9x9.8
. 20.
Technical Data Descri tion Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed __
r/min
General
System Pressure
Pump Motor
Heater power
Number of temp. control zones
Oil tank capacity
psi
kw
kw
t:t
us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
80
3.15
23
139.5
74.31
36.49
19.23
30458
36
BL750EKS/C4800
4800
85 90 100 80
3.35 3.54 3.94 3.15
23 23 21.8 23
157.5 176.5 218.0 153.3
83.89 94.05 116.11 81.66
41.19 46.18 57.01 33.36
21.70 24.33 30.04 17.58
26980 24066 19493 33313
17 .91
4.69
289
50.7+26.7
38.3 40.6 40.6 43
5+1
34.1x8.5x10.2
. 21. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
BL750EKS/C5900
827
41.34
41. 7 X 37 .8
57.3 X 53.3
17.72
43.31
84.65
10.63
22.3
14.5
21
5900
90 100 11 0
3.54 3.94 4.33
23 23 21
194.0 239.5 289.8
103.35 127.60 154.39
42.22 52.12 63.07
22.25 27.47 33.23
26322 21321 17620
19.69
4.28
224
2538
48.5 54 59.5
264
68343
BL750EKS/C7900
7900
90 100 110 120 80
3.54 3.94 4.33 4.72 3.15
23 23 23 21 23
211 .5 261.1 315.9 375.9 153.3
112.66 139.08 168.29 200.28 81.66
40.65 50.18 60.72 72.27 40.68
21.42 26.44 32.00 38.08 21.44
33341 27006 22319 18754 33313
21.46
4.12
183
50.7+50.7
50 54.2 58.4 58.4 43
6+1
35.8 X 8.5 X 10.2
BL850EKS/C5900
5900
90 100
3.54 3.94
23 23
194.0 239.5
103.35 127.60
51.49 63.57
27.13 33.50
26322 21321
19.69
5.22
254
48.5 54
5+1
937
43.31
44.1 X 40.2
61.4x57.5
17.72
45.28
88.58
11 .81
22.3
14.5
21
110 90
4.33 3.54
21 23
289.8 211 .5
154.39 112.66
76.92 40.65
40.53 21.42
17620 33341
2538
50.7+50.7
59.5 50
317
37.7 X 8.9 X 10.2
88185
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice .
BL850EKS/C7900
7900
100 110 120
3.94 4.33 4.72
23 23 21
261 .1 315.9 375.9
139.08 168.29 200.28
50.18 60.72 72.27
26.44 32.00 38.08
27006 22319 18754
21.46
4.12
183
54.2 58.4 58.4
6+1
. 22.
Technical Data Descri tion Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed __
r/min
General
System Pressure
Pump Motor
Heater power
Number of temp. control zones
Oil tank capacity
psi
kw
kw
t:t
us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
80
3.15
23
139.5
74.31
36.49
19.23
30458
36
BL750EKS/C4800
4800
85 90 100 80
3.35 3.54 3.94 3.15
23 23 21.8 23
157.5 176.5 218.0 153.3
83.89 94.05 116.11 81.66
41.19 46.18 57.01 33.36
21.70 24.33 30.04 17.58
26980 24066 19493 33313
17 .91
4.69
289
50.7+26.7
38.3 40.6 40.6 43
5+1
34.1x8.5x10.2
. 21. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
BL750EKS/C5900
827
41.34
41. 7 X 37 .8
57.3 X 53.3
17.72
43.31
84.65
10.63
22.3
14.5
21
5900
90 100 11 0
3.54 3.94 4.33
23 23 21
194.0 239.5 289.8
103.35 127.60 154.39
42.22 52.12 63.07
22.25 27.47 33.23
26322 21321 17620
19.69
4.28
224
2538
48.5 54 59.5
264
68343
BL750EKS/C7900
7900
90 100 110 120 80
3.54 3.94 4.33 4.72 3.15
23 23 23 21 23
211 .5 261.1 315.9 375.9 153.3
112.66 139.08 168.29 200.28 81.66
40.65 50.18 60.72 72.27 40.68
21.42 26.44 32.00 38.08 21.44
33341 27006 22319 18754 33313
21.46
4.12
183
50.7+50.7
50 54.2 58.4 58.4 43
6+1
35.8 X 8.5 X 10.2
BL850EKS/C5900
5900
90 100
3.54 3.94
23 23
194.0 239.5
103.35 127.60
51.49 63.57
27.13 33.50
26322 21321
19.69
5.22
254
48.5 54
5+1
937
43.31
44.1 X 40.2
61.4x57.5
17.72
45.28
88.58
11 .81
22.3
14.5
21
110 90
4.33 3.54
21 23
289.8 211 .5
154.39 112.66
76.92 40.65
40.53 21.42
17620 33341
2538
50.7+50.7
59.5 50
317
37.7 X 8.9 X 10.2
88185
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice .
BL850EKS/C7900
7900
100 110 120
3.94 4.33 4.72
23 23 21
261 .1 315.9 375.9
139.08 168.29 200.28
50.18 60.72 72.27
26.44 32.00 38.08
27006 22319 18754
21.46
4.12
183
54.2 58.4 58.4
6+1
. 22.
Technical Data Descri tion Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed __
r/min
General
System Pressure
Pump Motor
Heater power
Number of temp. control zones
Oil tank capacity
psi
kw
kw
t:t
us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
BLSS0EKS/C I 0000
100
3.94
23
285.0
151 .84
50.01
26.35
31219
56.2
937
43.31
44.1 X 40.2
61.4 X 57.5
17.72
45.28
88.58
11 .81
22.3
14.5
21
10000
11 0 120
4.33 4.72
23 23
344.9 410.4
183.73 218.65
60.51 72.01
31.89 37.95
25801 21680
23.43
4.11
173
2538
50.7+40.9+20.5
60.4
6+1
317
62.4
39.4 X 8.9 X 10.2
88185
130
5.12
21
481.7
256.61
84.52
44.53
18473
62.4
. 23. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
BL I 000EKS/C7900
7900
90 100 11 0
3.54 3.94 4.33
23 23 23
211 .5 261 .1 315.9
112.66 139.08 168.29
46.83 57.81 69.95
24.68 30.46 36.86
33341 27006 22319
21.46
4.75
202
50 54.2 58.4
BL I 000EKS/C I 0000
1102
45.28
45.7x41.7
64.1 X 60.0
19.69
47.24
92.52
11 .81
27.9
18.6
21
10000
120 100 11 0 120 130
4.72 3.94 4.33 4.72 5.12
21 23 23 23 21
375.9 285.0 344.9 410.4 481.7
200.28 151 .84 183.73 218.65 256.61
83.25 50.01 60.51 72.01 84.52
43.87 26.35 31.89 37.95 44.53
18754 31219 25801 21680 18473
23.43
4.11
173
2538
50.7+40.9+20.5
58.4 56.2 60.4 62.4 62.4
6+1
370
33.5 X 9.5 X 9.8
99208
BL I 000EKS/C 13500
13500
11 0 120 130 140
4.33 4.72 5.12 5.51
23 23 23 21 .3
371.0 441.5 518.1 600.9
197.62 235.19 276.02 320.12
59.12 70.36 82.57 95.76
31 .15 37.07 43.51 50.46
32094 26968 22979 19813
25.20
4.02
153
50.7+50.7+40.9
74.6 78.1 81.6 81.6
7+1
34.4 X 9.5 X 9.8
BL I 200EKS/C7900
90
3.54
23
211 .5
112.66
46.83
24.68
33341
50
1323
51 .97
49.6 X 44.1
69.9 X 64.4
21.65
51 .18
103.15
13.78
27.9
18.6
21
7900
100 110
3.94 4.33
23 23
261 .1 315.9
139.08 168.29
57 .81 69.95
30.46 36.86
27006 22319
21.46
4.75
202
2538
50.7+40.9+20.5
54.2 58.4
6+1
370
36.7x10.8x13.8
114640
120
4.72
21
375.9
200.28
83.25
43.87
18754
58.4
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice . . 24.
Technical Data Descri tion Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed __
r/min
General
System Pressure
Pump Motor
Heater power
Number of temp. control zones
Oil tank capacity
psi
kw
kw
t:t
us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
BLSS0EKS/C I 0000
100
3.94
23
285.0
151 .84
50.01
26.35
31219
56.2
937
43.31
44.1 X 40.2
61.4 X 57.5
17.72
45.28
88.58
11 .81
22.3
14.5
21
10000
11 0 120
4.33 4.72
23 23
344.9 410.4
183.73 218.65
60.51 72.01
31.89 37.95
25801 21680
23.43
4.11
173
2538
50.7+40.9+20.5
60.4
6+1
317
62.4
39.4 X 8.9 X 10.2
88185
130
5.12
21
481.7
256.61
84.52
44.53
18473
62.4
. 23. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
BL I 000EKS/C7900
7900
90 100 11 0
3.54 3.94 4.33
23 23 23
211 .5 261 .1 315.9
112.66 139.08 168.29
46.83 57.81 69.95
24.68 30.46 36.86
33341 27006 22319
21.46
4.75
202
50 54.2 58.4
BL I 000EKS/C I 0000
1102
45.28
45.7x41.7
64.1 X 60.0
19.69
47.24
92.52
11 .81
27.9
18.6
21
10000
120 100 11 0 120 130
4.72 3.94 4.33 4.72 5.12
21 23 23 23 21
375.9 285.0 344.9 410.4 481.7
200.28 151 .84 183.73 218.65 256.61
83.25 50.01 60.51 72.01 84.52
43.87 26.35 31.89 37.95 44.53
18754 31219 25801 21680 18473
23.43
4.11
173
2538
50.7+40.9+20.5
58.4 56.2 60.4 62.4 62.4
6+1
370
33.5 X 9.5 X 9.8
99208
BL I 000EKS/C 13500
13500
11 0 120 130 140
4.33 4.72 5.12 5.51
23 23 23 21 .3
371.0 441.5 518.1 600.9
197.62 235.19 276.02 320.12
59.12 70.36 82.57 95.76
31 .15 37.07 43.51 50.46
32094 26968 22979 19813
25.20
4.02
153
50.7+50.7+40.9
74.6 78.1 81.6 81.6
7+1
34.4 X 9.5 X 9.8
BL I 200EKS/C7900
90
3.54
23
211 .5
112.66
46.83
24.68
33341
50
1323
51 .97
49.6 X 44.1
69.9 X 64.4
21.65
51 .18
103.15
13.78
27.9
18.6
21
7900
100 110
3.94 4.33
23 23
261 .1 315.9
139.08 168.29
57 .81 69.95
30.46 36.86
27006 22319
21.46
4.75
202
2538
50.7+40.9+20.5
54.2 58.4
6+1
370
36.7x10.8x13.8
114640
120
4.72
21
375.9
200.28
83.25
43.87
18754
58.4
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice . . 24.
Technical Data Descri tion BL I 200EKS/C I 0000 BL I 200EKS/C 13500
Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed __
r/min
General
System Pressure
Pump Motor
Heater power
Number of temp. control zones
Oil tank capacity
psi
kw
kw
t:t
us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
100
3.94
23
285.0
151 .84
50.01
26.35
31219
56.2
1323
51.97
49.6 X 44.1
69.9 X 64.4
21.65
51 .18
103.15
13.78
27.9
18.6
21
10000
11 0 120 130 110
4.33 4.72 5.12 4.33
23 23 21 .2 23
344.9 410.4 481.7 371.0
183.73 218.65 256.61 197.62
60.51 72.01 84.52 59.12
31.89 37.95 44.53 31 .15
25801 21680 18473 32094
23.43
4.11
173
2538
50.7+40.9+20.5
60.4 62.4 62.4 74.6
6+1
370
36.7x10.8x13.8
114640
. 25. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
13500
120 130 140
4.72 5.12 5.51
23 23 21.3
441.5 518.1 600.9
235.19 276.02 320.12
70.36 82.57 95.76
37.07 43.51 50.46
26968 22979 19813
25.20
4.02
153
50.7+50.7+40.9
78.1 81.6 81.6
7+1
38.4x 10.8x 13.8
BL I 400EKS/C I 0000 BL I 400EKS/C 13500 BL I 400EKS/C 19300
1543
57.09
55.9 X 48
78.3 X 70.5
25.59
57.09
114.17
13.78
27.9
18.6
29
10000 13500 19300
100 110 120 130 110 120 130 140 120 135 145 155
3.94 4.33 4.72 5.12 4.33 4.72 5.12 5.51 4.72 5.31 5.71 6.10
23 23 23 21.2 23 23 23 21.3 23 23 23 21.4
285.0 344.9 410.4 481.7 371.0 441.5 518.1 600.9 500.1 633.0 730.2 834.4
151 .84 183.73 218.65 256.61 197.62 235.19 276.02 320.12 266.42 337 .19 389.00 444.50
60.78 73.54 87.52 102.71 59.12 70.36 82.57 95.76 67.45 85.36 98.48 112.53
32.02 38.75 46.12 54.12 31 .15 37.07 43.51 50.46 35.54 44.98 51.89 59.30
31219 25801 21680 18473 32094 26968 22979 19813 34159 26990 23396 20474
23.43 25.20 28.54
4.99 4.02 3.85
200 153 139
2538
50.7+50.7+40.9 50. 7 +40.9+40.9+40.9
56.2 60.4 62.4 62.4 74.6 78.1 81.6 81.6 70.7 76.5 80.7 80.7
6+1 7+1
436
39.7x11.5x14.1 41.3x11.5x14.1
147710
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice . . 26.
Technical Data Descri tion BL I 200EKS/C I 0000 BL I 200EKS/C 13500
Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed __
r/min
General
System Pressure
Pump Motor
Heater power
Number of temp. control zones
Oil tank capacity
psi
kw
kw
t:t
us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
100
3.94
23
285.0
151 .84
50.01
26.35
31219
56.2
1323
51.97
49.6 X 44.1
69.9 X 64.4
21.65
51 .18
103.15
13.78
27.9
18.6
21
10000
11 0 120 130 110
4.33 4.72 5.12 4.33
23 23 21 .2 23
344.9 410.4 481.7 371.0
183.73 218.65 256.61 197.62
60.51 72.01 84.52 59.12
31.89 37.95 44.53 31 .15
25801 21680 18473 32094
23.43
4.11
173
2538
50.7+40.9+20.5
60.4 62.4 62.4 74.6
6+1
370
36.7x10.8x13.8
114640
. 25. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
13500
120 130 140
4.72 5.12 5.51
23 23 21.3
441.5 518.1 600.9
235.19 276.02 320.12
70.36 82.57 95.76
37.07 43.51 50.46
26968 22979 19813
25.20
4.02
153
50.7+50.7+40.9
78.1 81.6 81.6
7+1
38.4x 10.8x 13.8
BL I 400EKS/C I 0000 BL I 400EKS/C 13500 BL I 400EKS/C 19300
1543
57.09
55.9 X 48
78.3 X 70.5
25.59
57.09
114.17
13.78
27.9
18.6
29
10000 13500 19300
100 110 120 130 110 120 130 140 120 135 145 155
3.94 4.33 4.72 5.12 4.33 4.72 5.12 5.51 4.72 5.31 5.71 6.10
23 23 23 21.2 23 23 23 21.3 23 23 23 21.4
285.0 344.9 410.4 481.7 371.0 441.5 518.1 600.9 500.1 633.0 730.2 834.4
151 .84 183.73 218.65 256.61 197.62 235.19 276.02 320.12 266.42 337 .19 389.00 444.50
60.78 73.54 87.52 102.71 59.12 70.36 82.57 95.76 67.45 85.36 98.48 112.53
32.02 38.75 46.12 54.12 31 .15 37.07 43.51 50.46 35.54 44.98 51.89 59.30
31219 25801 21680 18473 32094 26968 22979 19813 34159 26990 23396 20474
23.43 25.20 28.54
4.99 4.02 3.85
200 153 139
2538
50.7+50.7+40.9 50. 7 +40.9+40.9+40.9
56.2 60.4 62.4 62.4 74.6 78.1 81.6 81.6 70.7 76.5 80.7 80.7
6+1 7+1
436
39.7x11.5x14.1 41.3x11.5x14.1
147710
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice . . 26.
Technical Data Descri tion BL I 600EKS/C 13500 BL I 600EKS/C 19300
Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed __
r/min
General
System Pressure
Pump Motor
Heater power
Number of temp. control zones
Oil tank capacity
psi
kw
kw
t:t
us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
11 0
4.33
23
371.0
197.62
71.79
37.83
32094
74.6
13500
120 130 140 120
4.72 5.12 5.51 4.72
23 23 21.3 23
441.5 518.1 600.9 500.1
235.19 276.02 320.12 266.42
85.43 100.27 116.28 67.45
45.02 52.83 61.27 35.54
26968 22979 19813 34159
25.20
4.88
178
50. 7 +40.9+40.9+40.9
78.1 81.6 81.6 70.7
7+1
43.0 X 11 .8 X 14.1
. 27. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
1764
61.02
59.8 X 52
83.9 X 76.0
27.56
61.02
122.05
15.75
40.8
31.5
29
19300
135 145 155
5.31 5.71 6.10
23 23 21.4
633.0 730.2 834.4
337 .19 389.00 444.50
85.36 98.48 112.53
44.98 51.89 59.30
26990 23396 20474
28.54
3.85
139
2538
76.5 80.7 80.7
594
207235
BL I 600EKS/C25000
25000
140 150 160 170
5.51 5.91 6.30 6.69
23 23 23 21.6
737.0 846.1 962.7 1086.8
392.64 450.74 512.84 578.95
83.06 95.35 108.49 122.47
43.77 50.24 57.17 64.53
31002 27006 23736 21025
30.91
3.48
126
50. 7+50. 7 +50.7 +40.9
11 2 .1 116.4 120.7 120.7
8+1
44.3 X 11.8 X 14.1
BL I 850EKS/C 13500 BL I 850EKS/C 19300
13500
110 120 130
4.33 4.72 5.12
23 23 23
371.0 441.5 518.1
197.62 235.19 276.02
71.79 85.43 100.27
37.83 45.02 52.83
32094 26968 22979
25.20
4.88
178
74.6 78.1 81.6
2039
66.14
63.8 X 55.9
89.8 X 81.9
29.53
64.96
131.10
15.75
40.8
31.5
29
140 120
5.51 4.72
21.3 23
600.9 500.1
320.12 266.42
116.28 67.45
61.27 35.54
19813 34159
2538
50. 7 +40.9+40.9+40.9
81.6
7+1
594
89.9
45.9x 12.1 X 14.8
233690
19300
135 145 155
5.31 5.71 6.10
23 23 21 .5
633.0 730.2 834.4
337.19 389.00 444.50
85.36 98.48 112.53
44.98 51.89 59.30
26990 23396 20474
28.54
3.85
139
95.7 99.8 99.8
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice . . 28.
Technical Data Descri tion BL I 600EKS/C 13500 BL I 600EKS/C 19300
Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed __
r/min
General
System Pressure
Pump Motor
Heater power
Number of temp. control zones
Oil tank capacity
psi
kw
kw
t:t
us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
11 0
4.33
23
371.0
197.62
71.79
37.83
32094
74.6
13500
120 130 140 120
4.72 5.12 5.51 4.72
23 23 21.3 23
441.5 518.1 600.9 500.1
235.19 276.02 320.12 266.42
85.43 100.27 116.28 67.45
45.02 52.83 61.27 35.54
26968 22979 19813 34159
25.20
4.88
178
50. 7 +40.9+40.9+40.9
78.1 81.6 81.6 70.7
7+1
43.0 X 11 .8 X 14.1
. 27. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
1764
61.02
59.8 X 52
83.9 X 76.0
27.56
61.02
122.05
15.75
40.8
31.5
29
19300
135 145 155
5.31 5.71 6.10
23 23 21.4
633.0 730.2 834.4
337 .19 389.00 444.50
85.36 98.48 112.53
44.98 51.89 59.30
26990 23396 20474
28.54
3.85
139
2538
76.5 80.7 80.7
594
207235
BL I 600EKS/C25000
25000
140 150 160 170
5.51 5.91 6.30 6.69
23 23 23 21.6
737.0 846.1 962.7 1086.8
392.64 450.74 512.84 578.95
83.06 95.35 108.49 122.47
43.77 50.24 57.17 64.53
31002 27006 23736 21025
30.91
3.48
126
50. 7+50. 7 +50.7 +40.9
11 2 .1 116.4 120.7 120.7
8+1
44.3 X 11.8 X 14.1
BL I 850EKS/C 13500 BL I 850EKS/C 19300
13500
110 120 130
4.33 4.72 5.12
23 23 23
371.0 441.5 518.1
197.62 235.19 276.02
71.79 85.43 100.27
37.83 45.02 52.83
32094 26968 22979
25.20
4.88
178
74.6 78.1 81.6
2039
66.14
63.8 X 55.9
89.8 X 81.9
29.53
64.96
131.10
15.75
40.8
31.5
29
140 120
5.51 4.72
21.3 23
600.9 500.1
320.12 266.42
116.28 67.45
61.27 35.54
19813 34159
2538
50. 7 +40.9+40.9+40.9
81.6
7+1
594
89.9
45.9x 12.1 X 14.8
233690
19300
135 145 155
5.31 5.71 6.10
23 23 21 .5
633.0 730.2 834.4
337.19 389.00 444.50
85.36 98.48 112.53
44.98 51.89 59.30
26990 23396 20474
28.54
3.85
139
95.7 99.8 99.8
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice . . 28.
Technical Data Descri tion Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed __
r/min
General
System Pressure
Pump Motor
Heater power
Number of temp. control zones
Oil tank capacity
psi
kw
kw
t:t
us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
BL I 850EKS/C25000
140
5.51
23
737.0
392.64
83.06
43.77
31002
11 2. 1
2039
66.14
63.8 X 55.9
89.8 X 81.9
29.53
64.96
131.10
15.75
40.8
31.5
29
25000
150 160 170
5.91 6.30 6.69
23 23 21.6
846.1 962.7 1086.8
450.74 512.84 578.95
95.35 108.49 122.47
50.24 57 .17 64.53
27006 23736 21025
30.91
3.48
126
2538
50. 7 +50. 7+50. 7 +40.9
116.4
8+1
594
120.7
48.9x 12.1 X 14.8
233690
120.7
. 29. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
BL2200EKS/C 19300 BL2200EKS/C25000 BL2200EKS/C36000
2425
72.83
67.7x59.8
94.9 X 87 .0
29.53
68.90
141. 73
17.72
52.3
41.1
33
19300 25000 25000
120 135 145 155 140 150 170 185 160 170 185 195
4.72 5.31 5.71 6.10 5.51 5.91 6.69 7.28 6.30 6.69 7.28 7.68
23 23 23 21.5 23 23 22 21.6 23 23 23 21.7
500.1 633.0 730.2 834.4 737.0 846.1 1086.8 1287.0 1134.4 1280.6 1516.5 1684.9
266.42 337 .19 389.00 444.50 392.64 450.74 578.95 685.62 604.30 682.20 807.90 897.60
75.38 95.41 110.06 125.77 83.06 95.35 122.47 145.04 94.34 106.50 126.12 140.12
39.72 50.27 58.00 66.27 43.77 50.24 64.53 76.43 49.71 56.12 66.46 73.84
34159 26990 23396 20474 31002 27006 21025 17754 28733 25452 21492 19344
28.54 30.91 36.42
4.30 3.48 3.03
152 126 105
2538
50. 7+50. 7 +50.7 +40.9 50. 7 +50. 7 +50. 7 +50. 7
89.9 95.7 99.8 99.8 112 .1 116.4 120.7 120.7 175.8 180.7 188.7 188.7
7+1 8+1
660
52.2x13.5x15.1 54. 1 X 1 3. 5 X 1 5. 1
291010
BL2500EKS/C25000
140
5.51
23
737.0
392.64
87.43
46.07
31002
11 2. 1
2756
78.74
71.7x63.8
100.8 X 92.9
31.50
72.83
151.57
19.69
52.3
41.1
33
25000
150 170
5.91 6.69
23 22
846.1 1086.8
450.74 578.95
100.37 128.92
52.89 67.93
27006 21025
30.91
3.67
131
2538
50. 7 +50. 7+50. 7 +50.7
116.4
8+1
726
120.7
55.8x 14.1 x 15.7
352740
185
7.28
20
1287.0
685.62
152.67
80.45
17754
120. 7
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice . . 30.
Technical Data Descri tion Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure psi
Screw stroke in
Max. injection speed in/s
Max. Screw speed __
r/min
General
System Pressure
Pump Motor
Heater power
Number of temp. control zones
Oil tank capacity
psi
kw
kw
t:t
us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
BL I 850EKS/C25000
140
5.51
23
737.0
392.64
83.06
43.77
31002
11 2. 1
2039
66.14
63.8 X 55.9
89.8 X 81.9
29.53
64.96
131.10
15.75
40.8
31.5
29
25000
150 160 170
5.91 6.30 6.69
23 23 21.6
846.1 962.7 1086.8
450.74 512.84 578.95
95.35 108.49 122.47
50.24 57 .17 64.53
27006 23736 21025
30.91
3.48
126
2538
50. 7 +50. 7+50. 7 +40.9
116.4
8+1
594
120.7
48.9x 12.1 X 14.8
233690
120.7
. 29. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
BL2200EKS/C 19300 BL2200EKS/C25000 BL2200EKS/C36000
2425
72.83
67.7x59.8
94.9 X 87 .0
29.53
68.90
141. 73
17.72
52.3
41.1
33
19300 25000 25000
120 135 145 155 140 150 170 185 160 170 185 195
4.72 5.31 5.71 6.10 5.51 5.91 6.69 7.28 6.30 6.69 7.28 7.68
23 23 23 21.5 23 23 22 21.6 23 23 23 21.7
500.1 633.0 730.2 834.4 737.0 846.1 1086.8 1287.0 1134.4 1280.6 1516.5 1684.9
266.42 337 .19 389.00 444.50 392.64 450.74 578.95 685.62 604.30 682.20 807.90 897.60
75.38 95.41 110.06 125.77 83.06 95.35 122.47 145.04 94.34 106.50 126.12 140.12
39.72 50.27 58.00 66.27 43.77 50.24 64.53 76.43 49.71 56.12 66.46 73.84
34159 26990 23396 20474 31002 27006 21025 17754 28733 25452 21492 19344
28.54 30.91 36.42
4.30 3.48 3.03
152 126 105
2538
50. 7+50. 7 +50.7 +40.9 50. 7 +50. 7 +50. 7 +50. 7
89.9 95.7 99.8 99.8 112 .1 116.4 120.7 120.7 175.8 180.7 188.7 188.7
7+1 8+1
660
52.2x13.5x15.1 54. 1 X 1 3. 5 X 1 5. 1
291010
BL2500EKS/C25000
140
5.51
23
737.0
392.64
87.43
46.07
31002
11 2. 1
2756
78.74
71.7x63.8
100.8 X 92.9
31.50
72.83
151.57
19.69
52.3
41.1
33
25000
150 170
5.91 6.69
23 22
846.1 1086.8
450.74 578.95
100.37 128.92
52.89 67.93
27006 21025
30.91
3.67
131
2538
50. 7 +50. 7+50. 7 +50.7
116.4
8+1
726
120.7
55.8x 14.1 x 15.7
352740
185
7.28
20
1287.0
685.62
152.67
80.45
17754
120. 7
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice . . 30.
Technical Data Descri tion BL2500EKS/C36000 BL2500EKS/C49000
Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
160
6.30
23
36000
170
6.69
23
185
7.28
23
2756
78.74
71.7 X 63.8
100.8 X 92.9
31.50
72.83
151.57
195
7.68
21.7
19.69
52.3
41 .1
33
170
6.69
23
Theoretical shot volume cu in 1134.4 1280.6 1516.5 1684.9 1446.7
Maximum shot weight(PS) oz 604.30 682.20 807.90 897.60
Injection rate into the air cu in/s 94.34 106.50 126.12 140.12
Injection rate into the air(PS) oz/s 49.71 56.12 66.46 73.84
Specific Injection pressure psi 28733 25452 21492 19344
Screw stroke
Max. injection speed
Max. Screw speed
General
in
in/s
r/min
36.42
3.03
105
770.70
103.77
54.68
30300
2538
49000
190 200 220
7.48 7.87 8.66
23 23 21.4
1807 .1 2002.4 2422.9
962.71 1066.7 1290.7
129.62 143.63 173.79
68.30 75.68 91.58
24257 21892 18092
41.14
2.95
99
System Pressure
Pump Motor
Heater power
psi
kw
kw
50.7 +50. 7 +50. 7 +50. 7 50.7 +50. 7 +50. 7 +50. 7+26. 7
Number of temp. control zones
Oil tank capacity
t:t
us gal
Machine dimensions(LXWXH) ftXftXft
175.8 180.7 188.7
55.8x 14.1 x 15.7
188.7
8+1
726
222.7
Machine weight lbs 352740
. 3 I. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
233.7 239.5 239.5
59.7x14.1 x15.7
BL2800EKS/C36000 BL2800EKS/C49000
160
6.30
23
1134.4
604.30
109.43
57.66
28733
175.8
36000
170
6.69
23
185
7.28
23
195
7.68
21.7
1280.6 1516.5 1684.9
682.20 807 .90 897 .60
123.54 146.30 162.54
65.10 77.09 85.65
25452 21492 19344
36.42
3.51
118
170
6.69
23
1446.7
770.70
103. 77
54.68
30300
3086
82.68
75.6x67.7
107.1 x99.2
35.43
76.77
159.45
19.69
52.3
41.1
33
49000
190 200
7.48 7.87
23 23
1807 .1 2002.4
962.71 1066.7
129.62 143.63
68.30 75.68
24257 21892
41.14
2.95
99
2538
50. 7 +50. 7 +50. 7 +50. 7 +26.7
180.7 188.7 188.7 222.7
793
61.0x14.8x16.4
418878
233.7 239.5
8+1
220
8.66
21.4
2422.9
1290.7
173.79
91.58
18092
239.5
BL2800EKS/C80000
80000
210 220 240 260
8.27 8.66 9.45 10.24
23 23 23 22
2556.2 2805.4 3338.7 3918.3
1361. 7 1494.5 1778.6 2087.4
137.36 150.75 179.41 210.56
72.38 79.44 94.54 110.95
27626 25172 211 51 18022
47.64
2.56
78
50. 7+50. 7 +50.7 +50. 7 +40.9+40.9
222.7 229.1 242.9
925
65.0 X 14.8 X 16.4
584225
242.9
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice . . 32.
Technical Data Descri tion BL2500EKS/C36000 BL2500EKS/C49000
Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
160
6.30
23
36000
170
6.69
23
185
7.28
23
2756
78.74
71.7 X 63.8
100.8 X 92.9
31.50
72.83
151.57
195
7.68
21.7
19.69
52.3
41 .1
33
170
6.69
23
Theoretical shot volume cu in 1134.4 1280.6 1516.5 1684.9 1446.7
Maximum shot weight(PS) oz 604.30 682.20 807.90 897.60
Injection rate into the air cu in/s 94.34 106.50 126.12 140.12
Injection rate into the air(PS) oz/s 49.71 56.12 66.46 73.84
Specific Injection pressure psi 28733 25452 21492 19344
Screw stroke
Max. injection speed
Max. Screw speed
General
in
in/s
r/min
36.42
3.03
105
770.70
103.77
54.68
30300
2538
49000
190 200 220
7.48 7.87 8.66
23 23 21.4
1807 .1 2002.4 2422.9
962.71 1066.7 1290.7
129.62 143.63 173.79
68.30 75.68 91.58
24257 21892 18092
41.14
2.95
99
System Pressure
Pump Motor
Heater power
psi
kw
kw
50.7 +50. 7 +50. 7 +50. 7 50.7 +50. 7 +50. 7 +50. 7+26. 7
Number of temp. control zones
Oil tank capacity
t:t
us gal
Machine dimensions(LXWXH) ftXftXft
175.8 180.7 188.7
55.8x 14.1 x 15.7
188.7
8+1
726
222.7
Machine weight lbs 352740
. 3 I. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
233.7 239.5 239.5
59.7x14.1 x15.7
BL2800EKS/C36000 BL2800EKS/C49000
160
6.30
23
1134.4
604.30
109.43
57.66
28733
175.8
36000
170
6.69
23
185
7.28
23
195
7.68
21.7
1280.6 1516.5 1684.9
682.20 807 .90 897 .60
123.54 146.30 162.54
65.10 77.09 85.65
25452 21492 19344
36.42
3.51
118
170
6.69
23
1446.7
770.70
103. 77
54.68
30300
3086
82.68
75.6x67.7
107.1 x99.2
35.43
76.77
159.45
19.69
52.3
41.1
33
49000
190 200
7.48 7.87
23 23
1807 .1 2002.4
962.71 1066.7
129.62 143.63
68.30 75.68
24257 21892
41.14
2.95
99
2538
50. 7 +50. 7 +50. 7 +50. 7 +26.7
180.7 188.7 188.7 222.7
793
61.0x14.8x16.4
418878
233.7 239.5
8+1
220
8.66
21.4
2422.9
1290.7
173.79
91.58
18092
239.5
BL2800EKS/C80000
80000
210 220 240 260
8.27 8.66 9.45 10.24
23 23 23 22
2556.2 2805.4 3338.7 3918.3
1361. 7 1494.5 1778.6 2087.4
137.36 150.75 179.41 210.56
72.38 79.44 94.54 110.95
27626 25172 211 51 18022
47.64
2.56
78
50. 7+50. 7 +50.7 +50. 7 +40.9+40.9
222.7 229.1 242.9
925
65.0 X 14.8 X 16.4
584225
242.9
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice . . 32.
Technical Data Descri tion B Ll 300 E KS/C49000 BL3300EKS/C80000
Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure
Screw stroke
Max. injection speed
Max. Screw speed
General
System Pressure
Pump Motor
Heater power
psi
in
in/s
r/min
psi
kw
kw
Number of temp. control zones t:t
Oil tank capacity us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
170
6.69
23
1446.7
770.70
125.24
65.99
30300
222.7
49000
190 200
7.48 7.87
23 23
1807 .1 2002.4
962.71 1066.7
156.44 173.34
82.43 91.34
24257 21892
41.14
3.56
105
220
8.66
21 .4
2422.9
1290.7
209.74
110.52
18092
210
8.27
23
3638
86.61
83.1 X 75.2
116.5x108.7
39.37
78.74
165.35
21.65
69.5
54.3
25
80000
220
8.66
23
240
9.45
23
2556.2 2805.4 3338.7
1361.7 1494.5 1778.6
137.36 150.75 179.41
72.38 79.44 94.54
27626 251721151
47.64
2.56
78
2538
50. 7 +50. 7 +50. 7 +50. 7 +40.9+40.9
233.7 239.5 239.5 222.7
66.3x15.1 x16.7
229.1
8+1
925
242.9
584225
. 33. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
260
10.24
22
3918.3
2087.4
210.56
110.95
18022
242.9
BL3300EKS/Cl20000
120000
220 240 260 270
8.66 9.45 10.24 10.63
23 23 23 22.1
3524.2 4194.1 4922.2 5308.1
1877.4 2234.3 2622.2 2827.8
135.02 160.69 135.02 135.02
71 .15 84.67 71 .15 71.15
30112 25302 21559 19992
59.84
2.29
74
50.7 +50. 7 +50. 7 +50. 7+50. 7 +50.7
246 259.8 274.8 274.8
71.9 x15.1 x16.7
BL4000EKS/C80000 BL4000EKS/Cl20000
210
8.27
23
2556.2
1361. 7
147.17
77.55
27626
222.7
4409
92.52
95.3x87.4
132.3 X 124.4
43.31
82.68
175.20
23.62
63.6
49.7
25
80000 120000
220 240 260 220 240 260
8.66 9.45 10.24 8.66 9.45 10.24
23 23 22 23 23 23
2805.4 3338.7 3918.3 3524.2 4194.1 4922.2
1494.5 1778.6 2087.4 1877.4 2234.3 2622.2
161 .52 192.22 225.60 135.02 160.69 188.59
85.11 1 01 .29 118.87 71 .15 84.67 99.37
25172 211 51 18022 30112 25302 21559
47.64 59.84
2.74 2.29
92 74
2538
50. 7 +50. 7 +50. 7 +50. 7 +50. 7 +50. 7
229.1 242.9 242.9 246
8+1
1057
73.8x 17.4x 17.7
705479
259.8 274.8
270
10.63
22.1
5308.1
2827.8
203.37
1 07 .16
19992
274.8
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice . . 34.
Technical Data Descri tion B Ll 300 E KS/C49000 BL3300EKS/C80000
Clamp Unit
Clamping force us ton
Opening stroke in
Distance between tie bars(hXv) in
Platen dimension (hXv) in
Min. mould height in
Max. mould height in
Maximum daylight in
Ejector stroke in
Ejector force forward us ton
Ejector force back us ton
Number of ejector ping pc
Injection Unit
International specification
Screw diameter
Screw diameter
• Screw ratio
mm
in
Theoretical shot volume cu in
Maximum shot weight ( PS) oz
Injection rate into the air cu in/ s
Injection rate into the air(PS) oz/s
Specific Injection pressure
Screw stroke
Max. injection speed
Max. Screw speed
General
System Pressure
Pump Motor
Heater power
psi
in
in/s
r/min
psi
kw
kw
Number of temp. control zones t:t
Oil tank capacity us gal
Machine dimensions(LXWXH) ftXftXft
Machine weight lbs
170
6.69
23
1446.7
770.70
125.24
65.99
30300
222.7
49000
190 200
7.48 7.87
23 23
1807 .1 2002.4
962.71 1066.7
156.44 173.34
82.43 91.34
24257 21892
41.14
3.56
105
220
8.66
21 .4
2422.9
1290.7
209.74
110.52
18092
210
8.27
23
3638
86.61
83.1 X 75.2
116.5x108.7
39.37
78.74
165.35
21.65
69.5
54.3
25
80000
220
8.66
23
240
9.45
23
2556.2 2805.4 3338.7
1361.7 1494.5 1778.6
137.36 150.75 179.41
72.38 79.44 94.54
27626 251721151
47.64
2.56
78
2538
50. 7 +50. 7 +50. 7 +50. 7 +40.9+40.9
233.7 239.5 239.5 222.7
66.3x15.1 x16.7
229.1
8+1
925
242.9
584225
. 33. Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice.
260
10.24
22
3918.3
2087.4
210.56
110.95
18022
242.9
BL3300EKS/Cl20000
120000
220 240 260 270
8.66 9.45 10.24 10.63
23 23 23 22.1
3524.2 4194.1 4922.2 5308.1
1877.4 2234.3 2622.2 2827.8
135.02 160.69 135.02 135.02
71 .15 84.67 71 .15 71.15
30112 25302 21559 19992
59.84
2.29
74
50.7 +50. 7 +50. 7 +50. 7+50. 7 +50.7
246 259.8 274.8 274.8
71.9 x15.1 x16.7
BL4000EKS/C80000 BL4000EKS/Cl20000
210
8.27
23
2556.2
1361. 7
147.17
77.55
27626
222.7
4409
92.52
95.3x87.4
132.3 X 124.4
43.31
82.68
175.20
23.62
63.6
49.7
25
80000 120000
220 240 260 220 240 260
8.66 9.45 10.24 8.66 9.45 10.24
23 23 22 23 23 23
2805.4 3338.7 3918.3 3524.2 4194.1 4922.2
1494.5 1778.6 2087.4 1877.4 2234.3 2622.2
161 .52 192.22 225.60 135.02 160.69 188.59
85.11 1 01 .29 118.87 71 .15 84.67 99.37
25172 211 51 18022 30112 25302 21559
47.64 59.84
2.74 2.29
92 74
2538
50. 7 +50. 7 +50. 7 +50. 7 +50. 7 +50. 7
229.1 242.9 242.9 246
8+1
1057
73.8x 17.4x 17.7
705479
259.8 274.8
270
10.63
22.1
5308.1
2827.8
203.37
1 07 .16
19992
274.8
Due to the continuous product improvement, we reserve the right to adjust the individual parameters, without notice . . 34.
_ lifl_
BL 1 00EKS
�C
J��+--l•��l
,'----:--'-·-· .-.-_: _;;;i -�·· _____ j
e------'-C::=J f".,...-C.--=----, . . . . 'ffi � -ITT
BL 140EKS
BL 170EKS
. 35. "A" means enlarge injection unit size higher level (one level)
- ��- u _
-- -
BL230EKS
BL280EKS
't===;=t:=�· �I ·5F~ ;:_-'a--_ =
=
�:c::
--.Sl
BL350EKS
"A" means enlarge injection unit size higher level (one level)
::J ,7
\· . I l "I _-- '
_ ----+- ----,
. 36.
_ lifl_
BL 1 00EKS
�C
J��+--l•��l
,'----:--'-·-· .-.-_: _;;;i -�·· _____ j
e------'-C::=J f".,...-C.--=----, . . . . 'ffi � -ITT
BL 140EKS
BL 170EKS
. 35. "A" means enlarge injection unit size higher level (one level)
- ��- u _
-- -
BL230EKS
BL280EKS
't===;=t:=�· �I ·5F~ ;:_-'a--_ =
=
�:c::
--.Sl
BL350EKS
"A" means enlarge injection unit size higher level (one level)
::J ,7
\· . I l "I _-- '
_ ----+- ----,
. 36.
BL470EKS
�--J-r] I .= . /d-�'-11 I!; . I!;
� [A� ::j ::j
- >----c..J =
BL550EKS
,�,-
J;. BL650EKS
. 37. "A" means enlarge injection unit size higher level (one level)
BL750EKS
BL850EKS
BL 1000EKS _ ----j ----j
"A" means enlarge injection unit size higher level (one level)
=;�.'.' nrc,=;
. i . ··.
. 38.
BL470EKS
�--J-r] I .= . /d-�'-11 I!; . I!;
� [A� ::j ::j
- >----c..J =
BL550EKS
,�,-
J;. BL650EKS
. 37. "A" means enlarge injection unit size higher level (one level)
BL750EKS
BL850EKS
BL 1000EKS _ ----j ----j
"A" means enlarge injection unit size higher level (one level)
=;�.'.' nrc,=;
. i . ··.
. 38.
'-rrm�P�·��I� = J, L _J rn'
,-----+ -------, -------,-�___ __ �
� _,1
'--'--r��-�������� -~[l U'
•··,-/' ::-, I
BL1200EKS
BL1400EKS
BL1600EKS
. 39. "A" means enlarge injection unit size higher level (one level)
tI:l
'
'
. . '
BL1850EKS
BL2200EKS
"A" means enlarge injection unit size higher level (one level) . 40.
'-rrm�P�·��I� = J, L _J rn'
,-----+ -------, -------,-�___ __ �
� _,1
'--'--r��-�������� -~[l U'
•··,-/' ::-, I
BL1200EKS
BL1400EKS
BL1600EKS
. 39. "A" means enlarge injection unit size higher level (one level)
tI:l
'
'
. . '
BL1850EKS
BL2200EKS
"A" means enlarge injection unit size higher level (one level) . 40.
BL2500EKS
BL2800EKS
. 41. "A" means enlarge injection unit size higher level (one level)
i--2:))
�1lni�-�('ij� _--�'J
� I l �
I 1�1%���-e_" •· - -=-'cl · II-it-'� -.-- - -
� I - , , )
J -�-��-��-�����-�II_": n M
BL3300EKS
BL4000EKS
"A" means enlarge injection unit size higher level (one level) . 42.
BL2500EKS
BL2800EKS
. 41. "A" means enlarge injection unit size higher level (one level)
i--2:))
�1lni�-�('ij� _--�'J
� I l �
I 1�1%���-e_" •· - -=-'cl · II-it-'� -.-- - -
� I - , , )
J -�-��-��-�����-�II_": n M
BL3300EKS
BL4000EKS
"A" means enlarge injection unit size higher level (one level) . 42.
. 43.
Screw Specifications Upgraded version of the patented outside five-point mold clamping structure
Manual lubrication of mold ajustment nut
Platen /cross head/toggle use qtS00-7 high rigid ductile iron
T slot platen
The sliding foot of moving plate is supported by linear guideway
Anti-down support in slide shoes of movable platen, high hardness steel strip, reduce the deformation of tie-bar
EU2 mold mounting dimension
Hydraulic and Electrolic, dual security protection
Hydraulic motor drive gear; automatic mold heigh adjustment
Automatic adjustment of clamping force on demand
EU 18 robot postion
Precision low-pressure mold protection
Equipped with safety screen in the clamping unit.
Auto-door control and safety switch in its bottom and confirmed button in mold closing.
The operation of the open/close mold ,ejection is controlled by a high precision electronic ruler.
High precision open-close mold positioning control system, positioning repetition accuracy up to ±0.5 mm (patent design)
Optional: Multiple ejector model, seperated settings for speed & pressure
Equipped with synchronous ejector and core pulling system.
Five process in mold opening and mold closing, adjustable pressure
Self-detector for volumetric central oil lubrication, equiped with terminal pressure detection
Fully enclosed safety sheet metal, movable safty door
Open type security door I 000-4000eks)
Safe top cover plate for clamping area (70-280eks)
I set water manifold
2 sets water manifold
Buffer strip for security door
Magnetic platen
Hydraulic clamper
Moveable tiebar
Mold plate heat shield
Bigger mold height allowance
Electrolic/hydraulic spin demolding system
Mold lifting rod
Wider machine cover&door
Heightened frame(70-850eks)
Central ejector rod reinforced resetting function
Bigger eject force
Bigger eject stroke
Compulsive ejector back device
Machanical safety protection
Sepecial water manifold(flow meter)
2 air blow
Automatic lubrication of mold adjustment nut
Screw hole platen
• Standard @ Optional
100-470EKS 550-1 BS0EKS 2200-4000EKS
iiMIIAMiiiMIIAMliiMIIAMI • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
@ • • @ @ @
@ @ @
@ @ @
@ @ @
@ @ @
@ @ @
@
@ @ @
@
@ @ @
@ @ @
@ @ @
@ @ @
@ @
@ @ @
@ @ @
@ @ @ • • •
Injection Unit
A new type double cylinder balanced injection system with ultra-low oil return resistance
Linear guide rail support structure
Low speed high-torque hydraulic motor
German design high efficiency plasticizing screw barrel of high quality nitrided steel
Ceramic heater band
Multi-segment temperature controller for nozzle & barrel
Fully enclosed heat shield
Twin injection cyclinder design
Injection stroke control with precise transducer
The strimming device of the nozzle
Heating function timed to start
Screw anti-fluid device (pull-out/retract/suck back)
Rigid beam supporting structure
6 injection stages, 5 stages holding pressure, 5 stages chargin pressure/speed adjustable
Screw rotation speed detection
Auto-purge function for cleaning barrel
Proportional back pressure
Central lubrication in injection unit
Bearing type mobile hopper seat with ordinary hopper I 000-4000EKS loading platform)
Feeding plate, without hopper ( I 000-4000EKS)
Barrel supporting structure
Anti-slip board for injection base
Nozzle extension to 50mm.
Nozzle extension to I 00mm.
Spring or hydraulic, penumatic and self-locking nozzle
Hopper temperature control
Enlarged carrying structure
Decrease structure of shot out
Special screw barrel (electroplated, alloy, full-hard pcmma, pbt,pa, etc.)
Central self-lubrication in injection unit
Infrared heating band
Barrel fan cooling system
Electrical charge
Hydraulic synchronous melting system
Penumatic assistant injection signal interface
Signal interface of color machine
Micro - foaming molding
100-470EKS
iiMIIAMI • • • • • • • • • • • • • • • • • • • • •
@
@
@
@
@
@
@
@
@
@
@
@
@
@
• • • • • • • • • • • • • • • • • • • • • • •
• Standard @ Optional
. .
@
@
@
@
@
@
@
@
@
@
@
@
@
@
2200-4000EKS
• • • • • • • • • • • • • • • • • • • • • •
. . . .
@
@
@
@
@
@
@
@
@
@
@
@
@
@
. 44 .
. 43.
Screw Specifications Upgraded version of the patented outside five-point mold clamping structure
Manual lubrication of mold ajustment nut
Platen /cross head/toggle use qtS00-7 high rigid ductile iron
T slot platen
The sliding foot of moving plate is supported by linear guideway
Anti-down support in slide shoes of movable platen, high hardness steel strip, reduce the deformation of tie-bar
EU2 mold mounting dimension
Hydraulic and Electrolic, dual security protection
Hydraulic motor drive gear; automatic mold heigh adjustment
Automatic adjustment of clamping force on demand
EU 18 robot postion
Precision low-pressure mold protection
Equipped with safety screen in the clamping unit.
Auto-door control and safety switch in its bottom and confirmed button in mold closing.
The operation of the open/close mold ,ejection is controlled by a high precision electronic ruler.
High precision open-close mold positioning control system, positioning repetition accuracy up to ±0.5 mm (patent design)
Optional: Multiple ejector model, seperated settings for speed & pressure
Equipped with synchronous ejector and core pulling system.
Five process in mold opening and mold closing, adjustable pressure
Self-detector for volumetric central oil lubrication, equiped with terminal pressure detection
Fully enclosed safety sheet metal, movable safty door
Open type security door I 000-4000eks)
Safe top cover plate for clamping area (70-280eks)
I set water manifold
2 sets water manifold
Buffer strip for security door
Magnetic platen
Hydraulic clamper
Moveable tiebar
Mold plate heat shield
Bigger mold height allowance
Electrolic/hydraulic spin demolding system
Mold lifting rod
Wider machine cover&door
Heightened frame(70-850eks)
Central ejector rod reinforced resetting function
Bigger eject force
Bigger eject stroke
Compulsive ejector back device
Machanical safety protection
Sepecial water manifold(flow meter)
2 air blow
Automatic lubrication of mold adjustment nut
Screw hole platen
• Standard @ Optional
100-470EKS 550-1 BS0EKS 2200-4000EKS
iiMIIAMiiiMIIAMliiMIIAMI • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
@ • • @ @ @
@ @ @
@ @ @
@ @ @
@ @ @
@ @ @
@
@ @ @
@
@ @ @
@ @ @
@ @ @
@ @ @
@ @
@ @ @
@ @ @
@ @ @ • • •
Injection Unit
A new type double cylinder balanced injection system with ultra-low oil return resistance
Linear guide rail support structure
Low speed high-torque hydraulic motor
German design high efficiency plasticizing screw barrel of high quality nitrided steel
Ceramic heater band
Multi-segment temperature controller for nozzle & barrel
Fully enclosed heat shield
Twin injection cyclinder design
Injection stroke control with precise transducer
The strimming device of the nozzle
Heating function timed to start
Screw anti-fluid device (pull-out/retract/suck back)
Rigid beam supporting structure
6 injection stages, 5 stages holding pressure, 5 stages chargin pressure/speed adjustable
Screw rotation speed detection
Auto-purge function for cleaning barrel
Proportional back pressure
Central lubrication in injection unit
Bearing type mobile hopper seat with ordinary hopper I 000-4000EKS loading platform)
Feeding plate, without hopper ( I 000-4000EKS)
Barrel supporting structure
Anti-slip board for injection base
Nozzle extension to 50mm.
Nozzle extension to I 00mm.
Spring or hydraulic, penumatic and self-locking nozzle
Hopper temperature control
Enlarged carrying structure
Decrease structure of shot out
Special screw barrel (electroplated, alloy, full-hard pcmma, pbt,pa, etc.)
Central self-lubrication in injection unit
Infrared heating band
Barrel fan cooling system
Electrical charge
Hydraulic synchronous melting system
Penumatic assistant injection signal interface
Signal interface of color machine
Micro - foaming molding
100-470EKS
iiMIIAMI • • • • • • • • • • • • • • • • • • • • •
@
@
@
@
@
@
@
@
@
@
@
@
@
@
• • • • • • • • • • • • • • • • • • • • • • •
• Standard @ Optional
. .
@
@
@
@
@
@
@
@
@
@
@
@
@
@
2200-4000EKS
• • • • • • • • • • • • • • • • • • • • • •
. . . .
@
@
@
@
@
@
@
@
@
@
@
@
@
@
. 44 .
. 45.
Control Unit
12" KEBA Computer with color screen
Transducer, weak current switch, solenoid valve line, control line with waterproof bellows.
Equipped set value reference & on line operation help function
Simple robot interface
Multiple operating language
Safety realy module monitoring
Tricolor alarm light
Real-time energy consumption monitoring
Real-time clamping force monitoring
The driver adopts ac contactor protection device
Parameter data protection lock
Pid automatic temperature control,realizes the cylinder temperature self-correcting
Heating dual protection and solid state relay control.
USB interface, easy backup panel application update and mould parameters save
Have stop memory function,random can store 240 sets mould data
200 group abnormal alarm and 200 group modify record store
Multi-levelpasswordsettingstoprevent theerror revising/changingunintentional�andtheuser couldbefreelyauthorizedthequalifierto accessthe relatedpasswordlevelas request.
Input, output point detection and i/o on line simulation function, can quickly confirm the machine operation status.
The front and rear door emergency stop switch protection
Emergency stop switch protection of mold area ( I 200-4000eks)
Quality data process monitoring interface.
Production statistical process control real-time list interface (spc)
Equipped with feeding and detective sensor(70-3SOEKS)
Socket: 5-core 32AX I +5 core I 6AX I, 3-core multi-function X2
Socket: 5-core 32Ax I +5 core I 6Ax I, 3-core multi-function X2
Socket: 5-core 32Ax2+5 core I 6Ax I, 3-core multi-function x2
The(euro map I 2)robot interface
Hot runner interface
Reserve air blow, core pulling, ejector backward protection and other kinds of interfaces.
Techmation computer 12 inch color screen
IV3 I 00 computer (IO inch, 12 inch)
Beckhoff computer (IO inch, 12 inch)multiple operating language
Servo system adopts digital (CAN) communication (inovance drive)
Built-in operating instructions for computer (IV3 I 00 computer )
Special requirement socket
Computer network centralized control, network monitoring system.
Injection moulding machine industry 4.0 networking function (RS232\CAN\ETHERCAT)
Front and rear safety door light curtains protection
11 .. • • • • • • • • • • • • • • • • • • • • • • • @
@
@ • @
@
@
@
@
@
@
@
@
@
@
• Standard @ Optional
550-1 BS0EKS 2200-4000EKS
• • • • • • • • • • • • • • • • • • • • • • • •
@
@
·· · · iiiiiEEI
@
@
@
@
@
@
@
@
@
@
• • • • • • • • • • • • • • • • • • • • • •
• •
@
@
@
@
@
@
@
@
@
@
@
Hydraulic Unit
Servo energying-savingsystem
Oil temperature deviation automatic alarm
Motor overload protection function
Net oil suction filter
Self-sealing soil filter
Standard:one core pulling, reserve one core pulling(fixed platen)
Standard with 2 core pulling(! on fixed & I moving),reserve 2 core puliing(I on fixed & I on moving) with core hold and release function.
Uncovering high pressure hose with explosion-proof chain
Mold open differential device
Imported famous brand hydraulic control valve.
Imported famous brand hydraulic seals.
Imported nameplate high pressure hose.
Multi-group sequential injection function (electrical interface)
Multi-group sequential injection function ( independent 11 kw servo pump, ordinary motor, pneumatic valve available.)
High precision bypass filter
Enlarge plasticizing motor
Ejector backward buffering function
Nitrogen injection function (ACC)
Special numbers of core pulling
Enlarge pump motor power
Injection servo valve
Injection proportional valve
Mold open/clos proportional valve.
Ejector proportional valve
Other Standard machine color of Bole EKS
Adjustable level pad
Ground steel plate( I 850-4000EKS)Ground bolt
Spare parts tool box,common tools ,vulnerable parts ,extended nozzle,user1s guide
Pick-up platform( I 850-4000eks)
Machine fixed I-shaped positioning block
Special color (for cover)
Robot
Magnetic shelf
Hopper dryer
Auto-loader
Fumigation wood package
Hydrualic oil
Multiple language warning signs
• Standard @ Optional
I 00-470EKS 550-1 BS0EKS 2200-4000EKS
iiiiiEEiiiiiiGEliiiiiGEI • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • •
@ @
@ @
@ @
@ @
@ @
@ @
@ @
@ @
@ @
@
@ @
@ @
@
@
@
@
@
@
@
@
@
@
I00-470EKS 550-1 BS0EKS 2200-4000EKS
iiiiiGMiiiiiiGMliiiiiGMI • • • • • • • • • • • • •
@ @
@ @
@ @
@ @
@ @
@ @
@ @
@ @
@ @
@
@
@
@
@
@
@
@
@
. 46 .
. 45.
Control Unit
12" KEBA Computer with color screen
Transducer, weak current switch, solenoid valve line, control line with waterproof bellows.
Equipped set value reference & on line operation help function
Simple robot interface
Multiple operating language
Safety realy module monitoring
Tricolor alarm light
Real-time energy consumption monitoring
Real-time clamping force monitoring
The driver adopts ac contactor protection device
Parameter data protection lock
Pid automatic temperature control,realizes the cylinder temperature self-correcting
Heating dual protection and solid state relay control.
USB interface, easy backup panel application update and mould parameters save
Have stop memory function,random can store 240 sets mould data
200 group abnormal alarm and 200 group modify record store
Multi-levelpasswordsettingstoprevent theerror revising/changingunintentional�andtheuser couldbefreelyauthorizedthequalifierto accessthe relatedpasswordlevelas request.
Input, output point detection and i/o on line simulation function, can quickly confirm the machine operation status.
The front and rear door emergency stop switch protection
Emergency stop switch protection of mold area ( I 200-4000eks)
Quality data process monitoring interface.
Production statistical process control real-time list interface (spc)
Equipped with feeding and detective sensor(70-3SOEKS)
Socket: 5-core 32AX I +5 core I 6AX I, 3-core multi-function X2
Socket: 5-core 32Ax I +5 core I 6Ax I, 3-core multi-function X2
Socket: 5-core 32Ax2+5 core I 6Ax I, 3-core multi-function x2
The(euro map I 2)robot interface
Hot runner interface
Reserve air blow, core pulling, ejector backward protection and other kinds of interfaces.
Techmation computer 12 inch color screen
IV3 I 00 computer (IO inch, 12 inch)
Beckhoff computer (IO inch, 12 inch)multiple operating language
Servo system adopts digital (CAN) communication (inovance drive)
Built-in operating instructions for computer (IV3 I 00 computer )
Special requirement socket
Computer network centralized control, network monitoring system.
Injection moulding machine industry 4.0 networking function (RS232\CAN\ETHERCAT)
Front and rear safety door light curtains protection
11 .. • • • • • • • • • • • • • • • • • • • • • • • @
@
@ • @
@
@
@
@
@
@
@
@
@
@
• Standard @ Optional
550-1 BS0EKS 2200-4000EKS
• • • • • • • • • • • • • • • • • • • • • • • •
@
@
·· · · iiiiiEEI
@
@
@
@
@
@
@
@
@
@
• • • • • • • • • • • • • • • • • • • • • •
• •
@
@
@
@
@
@
@
@
@
@
@
Hydraulic Unit
Servo energying-savingsystem
Oil temperature deviation automatic alarm
Motor overload protection function
Net oil suction filter
Self-sealing soil filter
Standard:one core pulling, reserve one core pulling(fixed platen)
Standard with 2 core pulling(! on fixed & I moving),reserve 2 core puliing(I on fixed & I on moving) with core hold and release function.
Uncovering high pressure hose with explosion-proof chain
Mold open differential device
Imported famous brand hydraulic control valve.
Imported famous brand hydraulic seals.
Imported nameplate high pressure hose.
Multi-group sequential injection function (electrical interface)
Multi-group sequential injection function ( independent 11 kw servo pump, ordinary motor, pneumatic valve available.)
High precision bypass filter
Enlarge plasticizing motor
Ejector backward buffering function
Nitrogen injection function (ACC)
Special numbers of core pulling
Enlarge pump motor power
Injection servo valve
Injection proportional valve
Mold open/clos proportional valve.
Ejector proportional valve
Other Standard machine color of Bole EKS
Adjustable level pad
Ground steel plate( I 850-4000EKS)Ground bolt
Spare parts tool box,common tools ,vulnerable parts ,extended nozzle,user1s guide
Pick-up platform( I 850-4000eks)
Machine fixed I-shaped positioning block
Special color (for cover)
Robot
Magnetic shelf
Hopper dryer
Auto-loader
Fumigation wood package
Hydrualic oil
Multiple language warning signs
• Standard @ Optional
I 00-470EKS 550-1 BS0EKS 2200-4000EKS
iiiiiEEiiiiiiGEliiiiiGEI • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • •
@ @
@ @
@ @
@ @
@ @
@ @
@ @
@ @
@ @
@
@ @
@ @
@
@
@
@
@
@
@
@
@
@
I00-470EKS 550-1 BS0EKS 2200-4000EKS
iiiiiGMiiiiiiGMliiiiiGMI • • • • • • • • • • • • •
@ @
@ @
@ @
@ @
@ @
@ @
@ @
@ @
@ @
@
@
@
@
@
@
@
@
@
. 46 .
EKS Series
BOLE The Passionate Pursuit of Perfection
www.boleamerica.com
BOLE Machinery Inc. ADD: 4706 Hudson Drive Stow, Oh 44224
Tel:(330) 983-4700
Email :[email protected]
EKS Hydraulic Servo Energy-Sav ing Injec t ion Molding Machine
THIS CATALOGUE ARE PROTECTED BY LAW OF COPY RIGHT. ANY USE WITHOUT THE EXPRESS PERMISSION OF THE LAW OF COPY RIGHT,
MUST GET APPROVAL OF BOLE IN ADVANCE.
THIS VERSION WAS PRINTED IN NOVEMBER 2019.
BOLE Injection Molding Machine
THE CATALOG IS PROTECTED BY LAW OF COPY RIGHT.ANY USE WITHOUT THE EXPRESS PERMISSION OF BOLE MACHINERY, INC IS PROHIBITED.
THIS VERSION WAS PRINTED IN JANUARY 2020.