Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
EJOT® fastening solutions for the building technology
2
Content
3
Content
Content
Fasteners for the building technology
EJOFAST® self-drilling screw JF2-4.2 (steel)......................................... Page 11
Drop-in anchor LAL+ ........................................................................... Page 13
Setting tool for drop-in anchors LAL+ .................................................. Page 13
Screw anchor TSM 6x40 SW13 ........................................................... Page 14
Screw anchor TSM 6x35 vz M8/M10 ................................................... Page 15
Metal anchor MOLA ............................................................................ Page 16
Dry construction anchor KLA ............................................................... Page 17
Ceiling nail .......................................................................................... Page 18
Injection technology
Injection resin Multifix PSF ................................................................... Page 22
Injection resin Multifix VSF.................................................................... Page 23
Injection resin Super Epoxy SE 800 ..................................................... Page 24
Anchor rod AST ................................................................................... Page 25
Sleeves ................................................................................................ Page 25
Injection system accessories ............................................................... Page 24
Anchor bolts
EJOT® anchor bolt BA-V ...................................................................... Page 29
EJOT® anchor bolt BA-F ...................................................................... Page 30
EJOT® anchor bolt BA-E ...................................................................... Page 31
Facade anchors & nail anchors
EJOT® facade anchor SDF-KB-8V ...................................................... Page 34
EJOT® facade anchor SDF-KB-10V ..................................................... Page 35
EJOT® facade anchor SDF-KB-10H .................................................... Page 36
EJOT® facade anchor SDF-KB-14A ..................................................... Page 37
EJOT® facade anchor SDP-KB-10G .................................................... Page 38
Nail anchor ND-K ................................................................................ Page 39
Notes .................................................................................................. Page 40
Legal notice ......................................................................................... Page 42
International contact ............................................................................ Page 43
4
The Fastener.
Fastening technology for the building industryThe EJOT Construction Division caters to selected segments of the building indus-try with professional applications on facades. EJOT offers a broad product range and special expertise in fastening solutions.
The aspiration to high product quality is not an
end in itself for EJOT. Indeed, the user benefits
from our screws and anchors. And so reliable
installation also means low failure costs for
the customer. Moreover, durable quality joints
provide the best protection against expensive
customer complaints. This is why we will conti-
nue to manufacture our strategic product lines
to the highest quality standards in our plants,
which are certified to ISO/TS 16949.
Our services include outstanding logistics and
availability of products, qualified advice for
product selection, as well as professional pro-
cessing. We convey to our customers expert
knowledge about the use our products.
And if needs be, we are on hand with advice
and support for fastening systems. Further
service includes advice over the telephone,
application advice on site, initial sizing, compo-
nent tests in the EJOT test centre and a com-
prehensive training programme for architects,
specifiers and assemblers.
Innovative products are the key to success.
We leave nothing to chance. We identify our
customers' needs in-situ under real conditions
on the job site. Communication from the
market and about market requirements to
the development departments is ensured by
regular meetings between our technical experts
and specialists and users from the international
building industry. This is how we develop
innovative product solutions that have a clear
added value and inspire customers.
Bi-met screws manufacturing location"In der Aue", Bad Laasphe factory
5
The Fastener.
Experience and innovationChallenging fastening jobs call for competence and expert knowledge. No matter whether the construction of the highest tower or the southernmost polar station in the world - you benefit from over 30 years' of expertise in fastening systems for the building envelope.
Industrial lightweight constructionHigh-quality fasteners for fixing profiled sheets
and sandwich panels in the industrial light-
weight construction sector
External Thermal Insulation Composite SystemsSpecial anchors for fixing insulation on external
wall systems
Flat roofingFasteners and installation tools for the mecha-
nical fixing of insulation and roofing membra-
nes to flat roofs and slightly sloping roofs.
Rear ventilated facadesFastening, fixing and embedding elements for
fixing substructures and facade cladding of
rear ventilated systems
Industrial window and facade technologyHigh-quality fasteners for window and door
production and for use in aluminium/glass
facade systems
Solar Fastening technology for solar applications
One thing applies to all EJOT products:They were developed by experienced fastening
specialists. A strong team of developers, pro-
duct managers and application engineers.
We aspire to create solutions that meet your
requirements. The results are reliable product
solutions that simplify your work on the job
site. Everyone can sell products - but we can
meet your needs.
6
The Fastener.
Technical support by EJOT
Providing total confidence ON-SITEFor safety-relevant fixing in undefined or old masonry substrates, the EJOT team highly recommends an anchor pull-out test for drawing conclusions about the load capacity of the substrate and for choosing the right fastener.
The reason for this is simple.
Whilst we can be wholly confident that our
products will deliver maximum performance,
we believe that no one should second guess
the integrity of substrates. Where high loads
in critical structural components present a
EJOT® engineer’s testing and report service
Far more than simply "added value"No matter whether the inspection is instigated
by us, the installation engineer, the contractor
or the structural engineer - we formally agree
a time and date for the job site inspection.
In the run-up, our technical team gathers
information and creates a short yet concise
report to ensure our engineer is fully briefed.
With site-induction cleared, the tests are
carried out according to standard procedures
developed by EJOT’s technical support teams
globally. As a result, our engineers are fully-
briefed on all products, substrates, and the
impact of climatic conditions.
Within the building, fasteners are installed
at various heights and test points are then
identified. The pull-out force up to failure of the
substrate is then tested in each area.
potential risk, we want our customers to have
absolute peace of mind and confidence in the
match between fixing and substrate – and the
correct installation process.
At the end, our engineers write a report. The
data provide an average result that will enable
any structural engineer to compare loads
against the requisite European Technical Ap-
proval specifications.
7
The Fastener.
On-site test process
The engineers identify multiple test points within the building. The latest portable anchor extraction devices are used to check the substrate at the test points to establish the failure point.
DefinitionDetermination of load capacity values in un-
defined or old substrates in the roof or on the
wall, with tensile tests on the building followed
by recording in a test report and a recommen-
dation for the proper fastener.
ServicesTravel to and from, testing and recording
Requirements l Completed questionnaire with information
on the building and the local points of
contact
l The test site must be accessible and
secured
l Any necessary re-sealing work must be
carried out by the contractor
The benefits to you: l Pull-out tests by specially trained
EJOT® staff
l Use of calibrated test equipment
l Determination of the load values
l Provision of a test report
l Advice and evaluation of the test results
8
The Fastener.
Our Applitec Centre works in partnership with numerous
OEM’s, all of whom pursue the integrated aim of deve-
loping even better and more efficient products for the
building trade.
Technical support by EJOT
Providing total support OFF-SITEAPPLITEC - it’s derived from two words; Application Technology. EJOT APPLITEC is at the heart of everything we do worldwide; design, origination, testing and manufacturing progressive fastening systems that provide high installation performance and longevity in application.
Recreating on-site conditions for problem solving off-site
able to replicate conditions off-site – providing a resour-
ce of immeasurable value.
There are many different scenarios in which the Applitec
team can define or resolve a specific issue. In many
cases, this will be related to installation omissions or
substrate inconsistencies. Either way, the EJOT laborato-
ry is equipped with highly sophisticated equipment and
has the technical capability required to recreate and test
virtually any scenario, during or prior to installation.
Testing reports compiled by Applitec technicians can
enable structural engineers to determine if an incorrect
installation is still fit for purpose.
Equally, where there is any doubt surrounding subs-
trates, test conditions can be created as a means of
forecasting performance.
When customers need support with technical issues on-site, particularly
where there are structural implications, our team of Applitec technicians are
9
The Fastener.
10
Fasteners for the building technology
EJOFAST® screwsFast. No swarf. Reliable. The EJOFAST® screws are self-drilling screws without the classic cutting bit. Thanks to the innovative point geometry and special thread shape, the EJOFAST® screw not only fastens without any swarf and at high speed, it also has excellent retention properties.
Self-drilling screws with innovative point geometry
EJOFAST®
JF2-4.2EJOFAST®
Side lap screw JF2EJOFAST®
Side lap screw JF3
EJOFAST®
Thin sheet metal screw JF3
EJOFAST®
Wood screw JF3
MaterialSteel
Case-hardened zinc-plated
Steel Case-hardened
zinc-plated
A2 stainless steelwith hardened
steel point
A2 stainless steelwith hardened
steel point
A2 stainless steelwith hardened
steel point
For components from Steel SteelSteel
or aluminiumSteel
or aluminiumSteel
or aluminium on timber
Max. drilling capacity of steel[mm]
0.75 + 0.75 0.88 + 0.88 0.88 + 0.88 1.0 + 1.0 0.88
Ø [mm] 4.2 4.8 4.8 5.5 6.8
EJOFAST® product range overview
4
2
6
1
3
5
Free Spin Zone for a locked joint according to the latest IFBS assembly guidelines (only side lap screws)
Innovative screw point geome-try for skid-free application and no-swarf fixing
Hexagon drive
Asymmetrical screw thread for high pull-out strength
(except JF2-4.2xL)
Double-start thread for extremely high-speed fastening
(except thin sheet metal screws)
JF3-5.5 and JF3-6.8
Optional bonded washer made of zinc-plated steel or stainless steel with vulcanised elastomer, very good weather and UV resis-tance.
Fasteners for the building technology
11
Application range For the efficient connection of steel air ducts
Properties l Fastening without swarf
l Swarf does not need to be cleaned from the
ventilation ducts
l Case-hardened steel, zinc lamella coating
l Innovative screw point geometry
l Non-skid application
Ø [mm]
Length [mm]
Clamp thickness [mm]
PU Order description Article number
4.2 13 0-5 1,000 JF2-2-4.2x13 7 381 300 609
4.2 16 0-8 1,000 JF2-2-4.2x16 7 381 600 609
EJOFAST® self-drilling screw JF2-2-4.2
Technical specifications
Drilling capacity tI + tII 0.75 + 0.75 mm
Drive Hexagon AF7
AF7
J2
12
Fasteners for the building technology
Fasteners for the building technology
13
Application range l For use as single fastener according to
ETAG 001; Part 4 in non-cracked concrete
(see ETA-13/0442)
l For use as a multiple fastener in non-
supporting systems in cracked and non-
cracked concrete, e.g. suspension systems,
pipelines, air ducts, sprinkler systems,
cable racks, machines, supports and ceiling
beams (see ETA 13/0441)
l Also suitable for reinforced concrete hollow
floor, natural stone and brick
l Suitable for dry indoor areas
Properties l With collar, steel, galvanized zinc-plated
l Internal thread for metric screws and rods
l The suitable bolt length is 1-1.5 x nominal
anchor length + component thickness
l The smallest required drill hole depth
facilitates drilling and overhead mounting
Drop-in anchor LAL+ Galvanized zinc-plated steel, with collar
Ø[mm]
Length [mm]
PU Order description Article number
10 30 100 Drop-in anchor LAL+8 9 650 070 072
12 40 100 Drop-in anchor LAL+10 9 650 070 074
Characteristic values LAL+8 LAL+10
Outside diameter of sleeve dnom 10 mm 12 mm
Inside diameter of thread 8 mm 10 mm
Nominal drill diameter d0 10 mm 12 mm
Effective Embedment depth hef 30 mm 40 mm
Max. installation depth Ls, max 13 mm 16 mm
Max. installation depth Ls, min 8 mm 10 mm
Through hole diameter in the attached part df
9 mm 12 mm
Max. locating torque max. Tinst 8 Nm 15 Nm
Setting tool for drop-in anchors LAL+
PU Order description Article number
Setting tool for drop-in anchors LAL+8 9 900 102 975
Setting tool for drop-in anchors LAL+10 9150 001 040
Application range l For fast and reliable installation of
hammer-in anchor LAL+8 and LAL+10
l For making the drill hole
Note l The use of specially developed setting tools
is highly recommended for installing drop-in
anchors
l Drop-in anchors cannot be tightened by a
screw or bolt!
l If makeshift tools instead of professional
setting tools are used to install anchors,
the thread can be damaged and this causes
problems during installation.
ApprovalETA-13/0441ETA-13/0442
Performance data LAL+8 LAL+10
Non-cracked concrete C20/25 NRec
3.6 kN 4.8 kN
Non-cracked concrete C20/25 VRec
3.1 kN 4.5 kN
14
Fasteners for the building technology
Application range l For use as single fastener according to
ETAG 001; Part 3 in cracked and non-
cracked concrete (see ETA-15/0514)
l For use as a multiple fastener for non-
supporting systems in cracked and non-
cracked concrete and reinforced concrete
hollow-slab ceilings (see ETA-16/0123)
l Suitable for natural stone with compact
structure
l For fastening pipelines, ceiling brackets,
handrail brackets, shelves in high rack
warehouses, ventilation ducts and timber
substructures
Properties l Fast and reliable installation
l High load-bearing capacity in cracked and
non-cracked concrete
l Load transfer through free spin zone
l Complete removal if required
l Immediately resilient
Characteristic values
Min. drill hole depth 40 mm
Min. embedment depth 35 mm
Max. fastening height 5 mm
Screw anchor 6x40 SW13Hexagon head with flange
Ø[mm]
Length [mm]
PU Order description Article number
7.5 40 100 Screw anchor TSM 6x40 SW13 9 560 136 040
ApprovalETA-15/0514ETA-16/0123
Fasteners for the building technology
15
Application range l For use as single fastener according to
ETAG 001; Part 3 in cracked and non-
cracked concrete (see ETA-15/0514)
l For use as a multiple fastener for non-
supporting systems in cracked and non-
cracked concrete and reinforced concrete
hollow-slab ceilings (see ETA-16/0123)
l Suitable for natural stone with compact
structure
l For fastening pipelines, ceiling brackets,
ventilation ducts and timber substructures
Properties l Fast and reliable installation
l High load-bearing capacity in cracked and
non-cracked concrete
l Variable internal thread for metric screws
and rods M8 and M10
l Load transfer through free spin zone
l Complete removal if required
l Immediately resilient
Characteristic values
Min. drill hole depth 40 mm
Min. embedment depth 35 mm
Screw anchor 6x35 vz M8/M10Countersunk head with metric internal thread
Ø[mm]
Length [mm]
PU Order description Article number
7.5 35 100 Screw anchor TSM 6x35 vz M8/M10 9 560 006 035
ApprovalETA-15/0514ETA-16/0123
16
Fasteners for the building technology
Application range l Solid metal anchor with arms spreading out
and resting firmly on the back of the plate
l Suitable for fastening heavier loads acc.
to the characteristics of the sheet
l Suitable for areas where fire resistance is
required
Properties l The attached part can be removed and
replaced by loosening the screw
l Attach the anchor using a screwdriver or
with the MOLA special gripper
(Art. No.: 9 650 079 101)
l For dry indoor areas and outdoor areas for
limited periods.
Characteristic values for MOLA 6/13 gvz
Drill hole diameter do 12 mm
Max. clamp thickness Tfix 13 mm
Characteristic values for MOLA 6/26 gvz
Drill hole diameter do 12 mm
Max. clamp thickness Tfix 21 mm
Drywall anchor MOLAZinc-plated steel with flange
Length [mm]
PU Order description Article number
45 100 Drywall anchor MOLA 6/13 gvz 9 650 075 710
72 100 Drywall anchor MOLA 6/26 gvz 9 650 075 711
Fasteners for the building technology
17
Application range l Self-tapping fast anchor for fastening in
drywall
l Fireproof self-tapping anchor for standard-,
double and composite walls made of
plasterboard
l For fastening electrical installations, for
example
Properties l The fastest method for fastening lightweight
objects. No special tools required, a PZ2
screwdriver suffices. Attach flush with the
board surface, do not over-tighten
l Equipped with a 4.5x35 mm screw, ZP. Can
also be used with other self-tapping wood
and chipboard screws, hook bolts and
eyelets screws.
l For dry indoor areas and outdoor areas for
limited periods
Characteristic values
Max. clamp thickness Tfix 12 mm
Min. sheet thickness Tsheet, min 9 mm
Drywall anchor KLA
Galvanized zinc-plated steel
Length [mm]
PU Order description Article number
31 100 Drywall anchor KLA - metal 9 650 075 920
Installation note l To fasten plasterboards and plasterboard
double walls, pre-drill with an 8 mm drill
18
Fasteners for the building technology
Application range l For use as a multiple fastener of non-
supporting systems in concrete.
l Approved for concrete strengths from
C20/25 to C50/60
Properties l Multiple fastening
l High load bearing capacity in cracked and
non-cracked concrete
l Small drill holes
l Fast and reliable installation
Characteristic values without fire exposure
Drill hole diameter do 6 mm
Drill hole depth ≥ h1 40 mm
Embedment depth ≥ hef 32 mm
Min. component thickness hmin 80 mm
Edge distance cmin 150 mm
Centre distance smin 200 mm
Max. attached part thickness tfix 5 mm
Height of the attached part ≤ tfix 5 mm
Ceiling nailGalvanized zinc-plated steel
Ø[mm]
Length [mm]
PU Order description Article number
6 35 100 Ceiling nail T-DN 6-35 9 700 050 035
ApprovalETA-06/0259
19
Notes
20
Fasteners for the building technology
EJOT® chemical anchorsMortar cartridge for embedment of anchor rods indoors and outdoors with high load capacity and safety requirements Ideal for meeting the requirement for low axis and edge distances
Application range l Bridge construction
l Balcony railings
l Tunnel construction
l Building technology
Advantages l Can be used in water-filled drill holes
l A drill hole sealed with mortar protects the
reinforcements in the concrete against per-
manent wetness
l No spreading, enabling minimal axis and
edge distances
l Ideal for perforated brick
Minimal edge distance
Expansion pressure freeApprovalETA-13/0918 ETA 15/0282ETA 15/0287ETA-15/0342
Fasteners for the building technology
21
22
Fasteners for the building technology
EJOT® Injection resin Multifix PSFPolyester based Injection resin, styrene free
ApprovalETA-15/0342ETA 15/0287
Content [mm]
Composite mortar PUPrice/1
[EUR]Order description Article number
410 Polyester, styrene free EJOT Multifix PSF 9 570 000 410
Order information: Also available in 300 ml.
Application area l Suitable for masonry blocks (solid and
hollow)
l Approval for threaded rods in
concrete: M8, M10, M12, M16
solid masonry: M8, M10, M12
hollow masonry: M10
DescriptionTwo-component injection chemical anchor
based on polyester resin without styrene and
low odor.
Characteristics l For medium loads
l Good durability
l Without styrene, low odor
l Ideal for indoor and outdoor applications
l Fast curing
l Universal purpose
l Suitable also for colder environments
Certification l ETA-15/0342 for Masonry
l ETA 15/0287 for Concrete Option 7
l VOC classification A+
NoteFor details/questions please check with
technical department
Working and hardening times
-10* 50’ 4h 8h
-5 40’ 3h 6h
5 20’ 1h30’ 3h
15 9’ 1h 2h
25 5’ 30’ 1h
35 3’ 20’ 40’
*Resin temperature must be at least 20 °CFull cure 24 hoursAll specifications based on supplied mixer
4x
4x
4x
4x
2x
4x
Fasteners for the building technology
23
Application area l Suitable to anchor threaded rods and rebar
in cracked and non-cracked concrete.
l Approval for threaded rods M8, M10, M12,
M16, M20, M24
Description Two-component injection chemical anchor
based on vinylester resin without styrene and
low odor.
Characteristics l For high and critical loads
l High durability
l Without styrene, low odor
l Ideal for indoor and outdoor applications
l Fast curing
l Suitable for underwater applications
l Dynamic resistance
l Fire rated
l For use with potable water
Certification l ETA 15/0282 for Concrete
Option 1 and Rebar
l VOC classification A+
l BS6920 Approved
NoteFor details/questions please check with
technical department
EJOT® Injection resin Multifix VSFVinylester, styrene free
Content [mm]
Composite mortar PUPrice/1
[EUR]Order description Article number
410 Vinylester, styrene free EJOT Multifix VSF 9 571 000 410
Order information: Also available in 300 ml.
ApprovalETA 15/0282
Working and hardening times
-10* 50’ 4h 8h
-5 40’ 3h 6h
5 20’ 1h30’ 3h
15 9’ 1h 2h
25 5’ 30’ 1h
35 3’ 20’ 40’
*Resin temperature must be at least 20 °CFull cure 24 hoursAll specifications based on supplied mixer
4x
4x
4x
24
Fasteners for the building technology
EJOT® Injection resin Super Epoxy SE 800Pure Epoxy Injection Mortar
Content [mm]
Composite mortar PUPrice/1
[EUR]Order description Article number
400 Pure epoxy EJOT Super Epoxy SE 800 9 570 000 400
ApprovalETA-13/0918
Application area l Suitable for stone, rod and rebar connection
l Approval for threaded rods M8, M10, M12,
M16, M20
l Approval for rebar Ø 8 – Ø 32 mm
DescriptionTwo component injection chemical anchor
based on pure epoxy resin for high perfor-
mance and structural applications.
Characteristics l For high loads
l No shrinkage
l Useable in wet and flooded environments
l High chemical and temperature resistance
l Useable with diamond drilled holes
l Dynamic and long term loads resistance
l Fire resistance classification
l Suitable for warmer/hot regions
Certification l ETA 13/0918
l VOC classification A+
Working and hardening times
5 1h 33h 50h
10 50’ 24h 36h
20 30’ 6h 9h
30 15’ 4h 6h
40 8’ 3h 4h
Minimum resin temperature for injection: +10 ºC Minimum concrete temperature for injection: +5 ºC
4x
4x
4x
Fasteners for the building technology
25
Application area l For embedment in concrete and solid brick
l For installation in perforated brick in con-
nection with mesh sleeve
Properties AST steel l Anchor rod: strength grade 5.8 or 6.8
acc. to EN ISO 898-1
l Nut: strength grade 5 or 6
acc. to EN 20898-2
l Washer: acc.to EN ISO 7089
Anchor rod ASTapproved for polyester and vinyl ester composite mortar
ThreadLength
[mm]
min. embed-
ment depth in concrete
[mm]
min. embed-
ment depth in solid
brick [mm]
Drill hole diameter
Concrete/solid brick [mm]
PUPrice/100
[EUR]Order description Article number
Zinc-plated steel
M8 110 60 80 10 10 AST M8x110-V 9 570 098 110
M10 130 70 85 12 10 AST M10x130-V 9 570 910 130
M12 160 80 95 14 10 AST M12x160-V 9 570 912 160
M16 190 100 - 18 10 AST M16x190-V* 9 570 916 190
A4 stainless steel
M8 110 60 80 10 10 AST M8x110-E 9 571 098 110
M10 130 70 85 12 10 AST M10x130-E 9 571 910 130
M12 160 80 95 14 10 AST M12x160-E 9 571 912 160
M16 190 100 - 18 10 AST M16x190-E* 9 571 916 190
*No approval for embedment in solid brick masonryOrder information: Further lengths ant threads upon request.
Properties AST stainless steel A4 (1.4401 / 1.4571)
l Anchor rod: EN 10088; strength grade 70
(A4-70) acc. to EN ISO 3506
l Nut: EN 10088; strength grade 70
(A4-70) acc. to EN ISO 3506
l Washer: acc. to EN 10088
NoteTo determine the characteristic load-carrying
capacity in concrete the approval ETA-14/0121
has to considered. To determine the charac-
teristic load-carrying capacity in solid and
perforated brick the approval ETA-0092 has to
be considered.
Drill-hole diameter [mm]
Hole depth t ≤ mm
for threaded
rodPU
Price/10[EUR]
Order description Article number
12 50 M8, M10 10 Sleeve 12x50 9 570 012 050
12 80 M8, M10 10 Sleeve 12x80 9 570 012 080
16 85 M16 10 Sleeve 16x85 9 570 016 085
16 130 M16 10 Sleeve 16x130 9 570 016 130
20 85 M20 10 Sleeve 20x85 9 570 020 085
Sleeves
Application area l Indispensable for hollow masonry applica-
tions.
Characteristics l Once the resin has been injected, the cap
holds the fixing centered.
26
Fasteners for the building technology
EJOT® anchor boltAnchor bolt for installation of metal and wooden structures into concrete (facade, ceiling and floor). Meets high requirements for load capacity and safety. The anchor bolt is a true allrounder due to the range of possible applications and the availability of many different sizes.
Application Examples l Building technology
l Escalators
l Elevators
Advantages l Direct application of loads
l Setting tools for overhead installation
l Hot dip zinc plated version available
l EJOT dimensioning tool
ApprovalETA-14/0219
Fire ratingF30F60F90F120
Highly corrosion resistant
High load capacity
Fasteners for the building technology
27
28
Fasteners for the building technology
Anchor bolt range BA-V and BA-E
Punched bolt head prevents
thread destruction while
hammering.
Nut and washer are standar-
dised components.
The threaded body has been cold-
forged to guarantee a precision, high-
performance thread.
Marking indicates the size
of the anchor bolt and the
maximum fastening thick-
ness.
Active knurls ensure a good
grip and quick tightening of
the anchor.
The cylindrical shape of the cone at
the lower end allows controlled re-
expansion.
The curvature
permits anchor
insertion through
fixtures such as
timber.
A chamfered lower end of the sleeve
prevents jamming between the cone
and the sleeve.
A technically perfected
expansion sleeve.
Fasteners for the building technology
29
EJOT® anchor bolt BA-VGalvanized zinc-plated steel
ApprovalETA-14/0219
Application range l For embedment in cracked and non-
cracked concrete ≥ C20/25
l Dry indoor areas
Properties l Galvanized zinc-plated steel
l Approval for concrete, option I
l Fire resistance classes
F30, F60, F90, F120
Type of anchor
Design load Fper. [kN]
Centre distance [mm] Edge distance [mm] Permissible bending moment [Nm]
Tightening torque MD [Nm]Scr, N S min C Ccr, N C min S
BA-V-8 2.0 135 50 50 68 50 50 10.0 20
BA-V-10 3.6 180 55 80 90 50 100 22.9 35
BA-V-12 4.8 210 60 90 105 55 145 34.3 50
BA-V-16 9.5 255 70 120 128 85 150 88.6 120
Ø d0 [mm]
Length L [mm]
Fasteningthickness tfix
≤ [mm]
Drill hole depth h1 ≥
[mm]
Embedment depth hef ≥
[mm]PU Order description Article number
BA-V-8
8 72 10 60 45 50 BA-V-8/10 9 650 001 112
8 92 30 60 45 50 BA-V-8/30 9 650 001 114
8 112 50 60 45 40 BA-V-8/50 9 650 001 116
8 147 85 60 45 40 BA-V-8/85 9 650 001 118
BA-V-10
10 92 10 75 60 40 BA-V-10/10 9 650 001 132
10 102 20 75 60 25 BA-V-10/20 9 650 001 135
10 112 30 75 60 25 BA-V-10/30 9 650 001 136
10 132 50 75 60 25 BA-V-10/50 9 650 001 137
10 162 80 75 60 25 BA-V-10/80 9 650 001 139
BA-V-12
12 103 5 90 70 20 BA-V-12/5 9 650 001 150
12 118 20 90 70 20 BA-V-12/20 9 650 001 152
12 128 30 90 70 20 BA-V-12/30 9 650 001 153
12 163 65 90 70 20 BA-V-12/65 9 650 001 155
12 178 80 90 70 20 BA-V-12/80 9 650 001 157
BA-V-16
16 138 20 110 85 10 BA-V-16/20 9 650 001 171
Order information: Other dimensions upon request
NoteCharacteristic values apply to the compression
strength of C20/25 concrete. Design load of an
anchor for centric tension in cracked concrete.
F30F60F90F120
30
Fasteners for the building technology
EJOT® anchor bolt BA-FHot dip zinc plated steel
ApprovalETA-14/0219
Application range l For embedment in cracked and non-
cracked concrete ≥ C20/25
l Dry indoor areas
l For embedment of medium heavy to heavy
fixings indoors, such as pillars, metal
structures and wooden structures
Properties l Hot dip zinc plated steel
l Approval for concrete, option I
l Fire resistance classes
F30, F60, F90, F120
l For increased corrosion protection
Type of anchor
Design load Fper. [kN]
Centre distance [mm] Edge distance [mm] Permissible bending moment [Nm]
Tightening torque MD [Nm]Scr, N S min C Ccr, N C min S
BA-F-8 2.0 135 50 50 68 50 50 10.0 15
BA-F-10 3.6 180 55 80 90 50 100 22.9 35
BA-F-12 4.8 210 60 90 105 55 145 34.3 50
BA-F-16 9.5 255 70 120 128 85 150 88.6 120
Ø d0 [mm]
Length L [mm]
Fasteningthickness tfix
≤ [mm]
Drill hole depth h1 ≥
[mm]
Embedment depth hef ≥
[mm]PU Order description Article number
BA-F-8
8 72 10 60 45 50 BA-F-8/10 9 650 003 112
8 92 30 60 45 50 BA-F-8/30 9 650 003 114
8 112 50 60 45 40 BA-F-8/50 9 650 003 116
BA-F-10
10 92 10 75 60 40 BA-F-10/10 9 650 003 132
10 102 20 75 60 25 BA-F-10/20 9 650 003 135
10 112 30 75 60 25 BA-F-10/30 9 650 003 136
10 132 50 75 60 25 BA-F-10/50 9 650 003 137
BA-F-12
12 118 20 90 70 20 BA-F-12/20 9 650 003 152
12 128 30 90 70 20 BA-F-12/30 9 650 003 153
12 163 65 90 70 20 BA-F-12/65 9 650 003 155
12 178 80 90 70 20 BA-F-12/80 9 650 003 157
Order information: Other dimensions upon request
NoteCharacteristic values apply to the compression
strength of C20/25 concrete. Design load of an
anchor for centric tension in cracked concrete.
F30F60F90F120
Fasteners for the building technology
31
EJOT® anchor bolt BA-EStainless steel A4 (stainless steel HCR on request)
ApprovalETA-14/0219
Application range l For embedment in cracked and non-
cracked concrete ≥ C20/25
l Dry indoor areas
l Wet areas
l Outdoors, including in industrial atmos-
pheres and coastal environments
l HCR (1.4529) anchor for embedment in
chlorinated atmosphere available upon
request
Properties l A4 stainless steel
l Approval for concrete, option I
l Fire resistance classes
F30, F60, F90, F120
Type of anchor
Design load Fper. [kN]
Centre distance [mm] Edge distance [mm] Permissible bending moment [Nm]
Tightening torque MD [Nm]Scr, N S min C Ccr, N C min S
BA-E-8 2.0 135 50 50 68 50 50 10.5 20
BA-E-10 3.6 180 55 80 90 50 100 21.4 35
BA-E-12 4.8 210 60 90 105 55 145 37.6 70
BA-E-16 9.5 255 70 120 128 85 150 95.2 120
NoteCharacteristic values apply to the compression
strength of C20/25 concrete. Design load of an
anchor for centric tension in cracked concrete.
Ø d0 [mm]
Length L [mm]
Fasteningthickness tfix
≤ [mm]
Drill hole depth h1 ≥
[mm]
Embedment depth hef ≥
[mm]PU Order description Article number
BA-E-8
8 72 10 60 45 50 BA-E-8/10 9 650 005 112
BA-E-10
10 92 10 75 60 40 BA-E-10/10 9 650 005 132
10 112 30 75 60 25 BA-E-10/30 9 650 005 136
10 132 50 75 60 25 BA-E-10/50 9 650 005 138
BA-E-12
12 103 5 90 70 20 BA-E-12/5 9 650 005 150
12 118 20 90 70 20 BA-E-12/20 9 650 005 152
12 128 30 90 70 20 BA-E-12/30 9 650 005 154
Order information: Other dimensions upon request
F30F60F90F120
32
Fasteners for the building technology
Chamberlain Hall Student Residen-
ces, University of Birmingham, UK.
This £42 million development utilises
Kingspan’s framing systems, Bench-
mark copper panels and ceramic
terracotta facade.
Image courtesy of Speedclad Ltd, Northallerton North Yorkshire
Fasteners for the building technology
33
EJOT® facade anchorPlastic anchors for multiple structural fixing or embedment of non-load-bearing systems according to ETAG 020 for all common substrate. Particularly suitable for high bending moment requirements.
Application range l Facade systems
l Metal wall brackets
l Timber substructure
l Awnings, stairs
l Bracing, pillars
Advantages l High bending moment and high load
capacity
l Increased safety lock against torsion of the
anchor
l Small setting depths
l Very broad length range
ApprovalETA-10/0305 ETA-12/0502 ETA-15/0027 ETA-15/0387
High load capacity
High bending moment
34
Fasteners for the building technology
Application range l For embedment of metal substructures in
solid brick masonry and concrete
Properties l Hexagon head with flange
l Small drill-hole diameter
l Thermal and electrical isolation
l Product identification through different
sleeve colours
NoteFor planning and processing, please observe
ETA-15/0387
EJOT® facade anchor SDF-KB-8Vwith hexagon head
Characteristic values
Drive Hexagon A/F10
Drill hole depth ≥ h1 60 mm
Embedment depth ≥ hnom 50 mm
Ø [mm]
Anchor length L [mm]
Fasteningthickness B
≤ [mm]PU Order description Article number
Anchors with steel screws with zinc-plated Cr(VI)-free coating (-V)
8 60 10 100 SDF-KB-8Vx60-V 8 570 060 430
8 80 30 100 SDF-KB-8Vx80-V 8 570 080 430
8 100 50 100 SDF-KB-8Vx100-V 8 570 100 430
8 120 70 100 SDF-KB-8Vx120-V 8 570 120 430
8 140 90 100 SDF-KB-8Vx140-V 8 570 140 430
8 160 110 100 SDF-KB-8Vx160-V 8 570 160 430
8 180 130 100 SDF-KB-8Vx180-V 8 570 180 430
8 200 150 100 SDF-KB-8Vx200-V* 8 570 200 430
8 220 170 100 SDF-KB-8Vx220-V* 8 570 220 430
* Delivery time upon request
AF10
ApprovalETA-15/0387
Characteristic loads*
Tensile strength NRk,p in concrete < C16/20 4.50 kN
Tensile strength NRk,p in concrete ≥ C16/20 6.50 kN
Brick Mz 28-1.8, NF 2.50 kN
Solid lime sand brick KS, NF 20-2,0 2.00 kN
Transverse strength VRk,s
Anchor with steel screw 5.30 kN
Bending moment MRk,s
Anchor with steel screw 8.20 Nm
*applies to temperature range 30-50 °C / 50-80 °C
Fasteners for the building technology
35
Application range l Installation of metal attachments
l For all non-load carrying redundant systems
according to ETAG 020
l Suitable for the structural fastening of wall
cupboards, cladding, metal angle pieces
Properties l Anchor with an embedment depth of 40 mm
in concrete
l Two installation depths (embedment in
masonry 50 mm)
l Very short expansion part for extremely fast
installation
l Optimal expanding part due to radial
expansion
l Very high bending moment
l Product identification through different
sleeve colours
l Double safety lock against torsion for secure
installation
NotePlease observe European Technical Approval
ETA-10/0305 in the planning and processing of
products. Further information about parameters
and loads can be found in the approval.
EJOT® facade anchor SDF-KB-10Vwith hexagon head
Characteristic values
Hole depth in concrete h1,1 ≥ 50 mm
Effective embedment depth in concrete hnom,1
≥ 40 mm
Hole depth in masonry h1,2 ≥ 60 mm
Effective Embedment depth in masonry hnom,2
≥ 50 mm
Drill hole diameter d0 10 mm
Hole diameter of component to be fixed df ≤ 10.5 mm
Drive AF13/T40
Characteristic loads
Tensile load NRk,p in concrete C12/15
Temperature range 30 °C / 50 °C 4.50 kN
Temperature range 50 °C / 80 °C 4.00 kN
FRk brick Mz 20-1.8, NF 2.50 kN
FRk solid lime sand brick KS 36, NF 4.00 kN
FRk solid lime sand brick KS 20, 8 DF 4.50 kN
Transverse load VRk,s in concrete C12/15 at hnom,1 = 40 mm
Anchor with steel screw 7.93 kN
Anchor with stainless steel screw A4 9.12 kN
Transverse load VRk,s at hnom,2 = 50 mm
Anchor with steel screw 11.09 kN
Anchor with stainless steel screw A4 12.94 kN
Bending moment MRk,s at hnom,1 =40 mm
Anchor with steel screw 13.80 kN
Anchor with stainless steel screw A4 16.09 kN
Side load MRk,s at hnom,2 = 50 mm
Anchor with steel screw 23.01 Nm
Anchor with stainless steel screw A4 26.62 Nm
ApprovalETA-10/0305
Ø[mm]
Anchorlength L
[mm]
Fasteningthickness t
fix
(concrete)≤ [mm]
Fasteningthickness t
fix (masonry)
≤ [mm]
PU Order description Article number
Anchors with steel screws with zinc-plated Cr(VI)-free coating (-V)
10 50 10 – 100 SDF-KB-10Vx50-V 8 581 050 450
10 60 20 10 100 SDF-KB-10Vx60-V 8 581 060 450
10 70 30 20 100 SDF-KB-10Vx70-V 8 581 070 450
10 80 40 30 100 SDF-KB-10Vx80-V 8 581 080 450
10 100 60 50 100 SDF-KB-10Vx100-V 8 581 100 450
10 120 80 70 100 SDF-KB-10Vx120-V 8 581 120 450
10 140 100 90 100 SDF-KB-10Vx140-V 8 581 140 450
10 160 120 110 100 SDF-KB-10Vx160-V 8 581 160 450
10 180 140 130 100 SDF-KB-10Vx180-V 8 581 180 450
10 200 160 150 100 SDF-KB-10Vx200-V 8 581 200 450
10 220 180 170 100 SDF-KB-10Vx220-V 8 581 220 450
Anchor with A4 stainless steel screw (-E)
10 50 10 – 100 SDF-KB-10Vx50-E 8 581 050 650
10 60 20 10 100 SDF-KB-10Vx60-E 8 581 060 650
10 70 30 20 100 SDF-KB-10Vx70-E 8 581 070 650
hh1nomh ttol
t fix
h
h1,1hnom,1
t fixtolt
h
h1,2hnom,2
t fixtolt
Concrete
hh1nomh ttol
t fix
h
h1,1hnom,1
t fixtolt
h
h1,2hnom,2
t fixtolt
Masonry
AF13/T40
36
Fasteners for the building technology
Application range l Installation of metal attachments
l For all non-load carrying redundant systems
according to ETAG 020
l Suitable for the structural fastening of wall
cupboards, cladding, metal angle pieces
l For embedment in rain screens
Properties l Approved for all common building materials
l Reliable hold in problematic building material
thanks to optimised expansion part
l Radial expansion for reliable hold
l Product identification through different
sleeve colours
l Double safety lock against torsion for secure
installation
NotePlease observe European Technical Approval
ETA-10/0305 in the planning and processing of
products. Further information about parameters
and loads can be found in the approval.
EJOT® facade anchor SDF-KB-10Hwith hexagon head
Characteristic values
Hole depth in concrete h1,1 ≥ 80 mm
Effective Embedment depth hnom ≥ 70 mm
Drill hole diameter d0 10 mm
Hole diameter of component to be fixed df ≤ 10.5 mm
Drive AF13/T40
Characteristic loads
Tensile load NRk,p in concrete C12/15
Temperature range 30 °C / 50 °C 4.50 kN
Temperature range 50 °C / 80 °C 4.00 kN
Brick Mz 20-1.8, NF 4.00 kN
Solid lime sand brick KS 36, NF 4.50 kN
Solid lime sand brick KS 20, 8 DF 4.50 kN
Solid lightweight concrete brick V6, 2 DF 2.00 kN
Vertically perforated brick HLz 12-0.9, NF 2.00 kN
Perforated lime sand brick KSL 12, 4 DF 2.50 kN
Cavity block made of lightweight concrete Hbl 10, 12 DF
1.20 kN
Transverse load VRk,s
Anchor with steel screw 9.35 kN
Anchor with stainless steel screw A4 10.91 kN
Bending moment MRk,s
Anchor with steel screw 17.67 Nm
Anchor with stainless steel screw A4 20.62 Nm
ApprovalETA-10/0305
Ø [mm]
Anchor length L [mm]
Fasteningthickness tfix
≤ [mm]PU Order description Article number
Anchors with steel screws with zinc-plated Cr(VI)-free coating (-V)
10 80 10 100 SDF-KB-10Hx80-V 8 513 080 420
10 100 30 100 SDF-KB-10Hx100-V 8 513 100 420
10 120 50 100 SDF-KB-10Hx120-V 8 513 120 420
10 140 70 100 SDF-KB-10Hx140-V 8 513 140 420
10 160 90 100 SDF-KB-10Hx160-V 8 513 160 420
10 180 110 100 SDF-KB-10Hx180-V 8 513 180 420
10 200 130 100 SDF-KB-10Hx200-V 8 513 200 420
10 220 150 100 SDF-KB-10Hx220-V 8 513 220 420
Anchor with A4 stainless steel screw (-E)
10 80 10 100 SDF-KB-10Hx80-E 8 513 080 620
10 100 30 100 SDF-KB-10Hx100-E 8 513 100 620
10 120 50 100 SDF-KB-10Hx120-E 8 513 120 620
10 140 70 100 SDF-KB-10Hx140-E 8 513 140 620
10 160 90 100 SDF-KB-10Hx160-E 8 513 160 620
10 180 110 100 SDF-KB-10Hx180-E 8 513 180 620
10 200 130 100 SDF-KB-10Hx200-E 8 513 200 620
10 220 150 100 SDF-KB-10Hx220-E 8 513 220 620
hh1nomh ttol
t fix
h
h1,1hnom,1
t fixtolt
h
h1,2hnom,2
t fixtolt
Installationsubstrate
AF13/T40
Fasteners for the building technology
37
Application range l Installation of metal attachments
l For all non-load carrying redundant systems
according to ETAG 020
l Suitable for the structural fastening of wall
cupboards, cladding, metal angle pieces
Properties l Approved for all common building materials
l Reliable hold in problematic building material
thanks to optimised expansion part
l Radial expansion for reliable hold
l Product identification through different
sleeve colours
l Double safety lock against torsion for secure
installation
NoteFor the planning please note approval ETA-
15/0027.
EJOT® facade anchor SDF-KB-14Awith hexagon head
Characteristic values
Drive Hexagon A/F17
Drill hole depth ≥ t 80 mm
Embedment depth ≥ hv 70 mm
AF17
Ø [mm]
Anchor length L [mm]
Fixingthickness B
≤ [mm]PU Order description Article number
Anchors with steel screws with zinc-plated Cr(VI)-free coating (-V)
14 80 10 50 SDF-KB-14Ax80-V 8 590 080 430
14 100 30 50 SDF-KB-14Ax100-V 8 590 100 430
Anchor with A4 stainless steel screw (-E)
14 80 10 50 SDF-KB-14Ax80-E* 8 590 080 630
14 100 30 50 SDF-KB-14Ax100-E* 8 590 100 630
* Delivery time upon request
Characteristic loads*
Tensile load NRk,p in concrete > C12/15 8.50 kN
Brick Mz 20-1.8, NF 5.50 kN
Solid lime sand brick KS 20-2.0 6.00 kN
Solid lime sand brick KS 20-1.8 7.00 kN
Solid brick V, 3 DF 3.00 kN
Vertically perforated brick HLz, 2 DF 28-1.2 2.00 kN
Perforated lime sand brick KSL, 8 DF 16-1.4
2.50 kN
Cavity block tile made of lightweight concrete Hbl, 12 DF
2.00 kN
Aerated concrete fb ≥ 2 N/mm2 1.20 kN
Aerated concrete fb ≥ 4 N/mm2 2.50 kN
Aerated concrete fb ≥ 6 N/mm2 3.50 kN
Transverse load VRk,s
Anchor with steel screw 21.7 kN
Anchor with stainless steel screw A4 25.3 kN
Bending moment MRk,s
Anchor with steel screw 62.5 Nm
Anchor with stainless steel screw A4 72.9 Nm
*applies to temperature range 30-50 °C / 50-80 °C
ApprovalETA-15/0027
ht fixh1
nomh tolt
ht fixh1
nomh tolt
Ø14A
SDF-KB
Ø14A
SDF-S
Accessories
Order description PU Article number
Socket A/F17-3/8“x25 1 9 250 522 000
38
Fasteners for the building technology
Characteristic values
Drive AF13/T40
Drill hole depth ≥ t 80 mm
Embedment depth ≥ hv 70 mm
Characteristic values
Compressive strength aerated concrete [N/mm2]
Aerated concrete 2 0.75 kN
Aerated concrete 3 1.31 kN
Aerated concrete 4 1.87 kN
Aerated concrete 6 3.00 kN
Partial safety factor γMAAC 2.00
Characteristic bending moment
Steel screw 17.7 Nm / γMs 1.50
Stainless steel screw 20.6 Nm / γMs 1.87
ApprovalETA-12/0502
Application range l For embedment of metal components in
aerated concrete
Properties l Facade anchor with two-stage screw
l Reliable form-fit in the substrate thanks to
combined expansion zones
l High load capacity
l Available with steel screws or stainless steel
screws
NoteFor planning and processing, please observe
approval ETA-12/0502.
EJOT® facade anchor SDP-KB-10Gwith hexagon head
Ø [mm]
Anchor length L [mm]
Clamping thickness tfix
≤ [mm]PU Order description Article number
Anchors with steel screws with zinc-plated Cr(VI)-free coating (-V)
10 80 10 100 SDP-KB-10Gx80-V 8 532 080 420
10 100 30 100 SDP-KB-10Gx100-V 8 532 100 420
10 120 50 100 SDP-KB-10Gx120-V 8 532 120 420
10 140 70 100 SDP-KB-10Gx140-V 8 532 140 420
10 160 90 100 SDP-KB-10Gx160-V 8 532 160 420
10 180 110 100 SDP-KB-10Gx180-V 8 532 180 420
10 200 130 100 SDP-KB-10Gx200-V 8 532 200 420
10 220 150 100 SDP-KB-10Gx220-V 8 532 220 420
Anchor with A4 stainless steel screw (-E)
10 80 10 100 SDP-KB-10Gx80-E 8 532 080 620
10 100 30 100 SDP-KB-10Gx100-E 8 532 100 620
10 120 50 100 SDP-KB-10Gx120-E 8 532 120 620
10 140 70 100 SDP-KB-10Gx140-E 8 532 140 620
10 160 90 100 SDP-KB-10Gx160-E 8 532 160 620
10 180 110 100 SDP-KB-10Gx180-E 8 532 180 620
10 200 130 100 SDP-KB-10Gx200-E 8 532 200 620
10 220 150 100 SDP-KB-10Gx220-E 8 532 220 620
AF13/T40
Fasteners for the building technology
39
Application range l Time saving anchor for light fastenings:
substructures, wardrobes, floorboards, bars,
cable racks, cable clamps, tube holders
l For dry indoor conditions
Eigenschaften l Polyamid countersunk anchor
l Nail screw with steel countersunk head,
galvanized zinc plated
d0
[mm]L
[mm]tfix
[mm]hnom
[mm]h1
[mm]PU Order description Article number
5 30 5 25 40 200 ND-K-5x30 9 650 075 658
5 50 20 30 60 200 ND-K-5x50 9 650 075 659
6 40 10 30 50 200 ND-K-6x40 9 650 075 660
6 60 30 30 70 200 ND-K-6x60 9 650 075 661
6 80 50 30 90 100 ND-K-6x80 9 650 075 662
8 60 20 40 70 100 ND-K-8x60 9 650 075 665
8 80 40 40 90 100 ND-K-8x80 9 650 075 663
8 100 60 40 110 100 ND-K-8x100 9 650 075 664
8 120 80 40 130 100 ND-K-8x120 9 650 075 610
Nail anchor ND-K
PZ
40
Notes
41
Notes
4242
Imprint
ImprintPublisher:
EJOT Baubefestigungen GmbH
57334 Bad Laasphe, Germany
Layout and realisation:
EJOT Baubefestigungen GmbH
57334 Bad Laasphe, Germany
Legal Notes
EJOT products undergo continuous further development. We
reserve the right to make changes to ranges and prices. For
current product data please visit our online shop at www.
bau.ejot.de
During planning and use of our products, please comply with
the accepted rules of technology, construction legislation
and the relevant safety regulations. The national technical
approvals granted to our products can be downloaded on
the Internet at www.ejot.com.
General terms and conditions:
Our general terms and conditions can also be found at www.
ejot.com (footer: Terms & Conditions)
© 2017 by EJOT Baubefestigungen GmbH
EJOT®, ejotherm®, Delta PT® and PT® are registered trade-
marks of EJOT GmbH & Co. KG. CRONIMAKS®, Corremaks®,
EJOFAST®, Dabo®, ECOmate® FR-variotool® and Solar
Ready® are registered trademarks of EJOT Baubefestigun-
gen GmbH. SDS plus® is a registered trademark of Robert
Bosch GmbH. DEKTITE® is a registered trademark of Deks
Industries Pty. Ltd., Bayswater Victoria, AU. TORX®, TORX
PLUS® and AUTOSERT® are registered trademarks of Acu-
ment Intellectual Properties, LLC, Troy Mich., US.
Cover:
Katuaq Nuuk Godthab Modern Architecture, Greenland
Credit: Getty Images/iStockphoto © Mlenny
Your contact:
www.ejot.com
43
ContactInternational
AustriAEJOT Austria GmbH & Co KGGrazer Vorstadt 146 A-8570 Voitsberg phone: +43 3142 2 76 00-0 fax: +43 3142 2 76 00-30 e-mail: [email protected] Internet: www.ejot.at
BAltic stAtesUAB EJOT BalticTitnago g. 19 LT-02300 Vilnius phone: +370 5 23 11-437 fax: +370 5 23 11-439 e-mail: [email protected]: www.ejot.lt
BeneluxEJOT Benelux bvba/sprlReedonk 19-1B-2880 Bornemphone: +32 3 740 79 70fax: +32 3 740 79 79e-mail: [email protected] Internet: www.ejot.be
BrAZilEJOT & Fey Ltda. Rod BR 470, 2451 - Rio MortoIndaial - SC, 89130-000, BrasilPhone: +55 47 3281-7000e-mail: [email protected]
BulgAriAEJOT Bulgaria EOOD & Co. KDLogistic center „Mimi DM“ No 31Miroviane 1289 phone: +359 2421 96 37fax: +359 2421 96 37e-mail: [email protected]
BOsniA AnD HerZegOVinAEJOT d.o.o. SarajevoRajlovacka b.b.BiH-71000 Sarajevophone: +387 33 782 760e-mail: [email protected]
cHinAEJOT Fastening System (Taicang) Co., LtdNo.165 Fada Road Loudong Street Taicang, Jiangsu ProvinceP.R. China 215413phone: +86 512 53 56 52 90-105fax: +86 512 53 56 62 92e-mail: [email protected]: www.ejot.cn
crOAtiAEJOT Spojna Tehnika d.o.o.Franje Lučića 23/3HR-10090 Zagrebphone: +385 1 349 86 12fax: +385 1 349 89 63e-mail: [email protected]
cZecH repuBlic EJOT CZ, s.r.o.Zdĕbradská 65CZ-25101 Řičany-Jažlovicephone: +420 323 62 78 11fax: +420 323 62 78 20e-mail: [email protected]: www.ejot.cz
DenmArkEJOT Danmark ApSIndustrisvinget 8 DK-4683 Rønnede phone: +45 56 39 08 42fax: +45 56 39 91 06e-mail: [email protected]: www.ejot.dk
FinnlAnDSormat OyHarjutie 5FI-21290 Ruskophone: +358 (0)207 94 0200fax: +358 (0)201 76 3888e-mail: [email protected] Internet www.sormat.com
FrAnceEJOT France S.à.r.l.Z.I. de Villé - 5 rue du Climont B.P. 40023 F-67220 Villé phone: +33 388 58 92 00fax: +33 388 58 92 01e-mail: [email protected]: www.ejot.fr
germAnyEJOT Baubefestigungen GmbHIn der Stockwiese 35D-57334 Bad Laasphephone: +49 2752 908-0fax: +49 2752 908-731e-mail: [email protected]: www.ejot.de
HungAryEJOT Hungaria Kft.Leshegy út 16.H-2310 Szigetszentmiklósphone: +36 30 546 6807e-mail: [email protected]: www.ejot.hu
inDiALPS-EJOT Fastening Systems Pvt. Ltd.A-501/502, Millennium Plaza, Sector-27, Gurgaon -1240022, Haryana, lndiaphone: +91 124 4200 492fax: +91 124 4200 493mobile: +91 98180 7 77 92e-mail: [email protected]
itAlyEJOT Tecnologie di fissaggio S.a.s.Via Marco Polo 16I-35011 Campodarsego (PD)phone: +39 049 98690 00e-mail: [email protected]: www.ejot.it
JApAn EJOT Japan L.L.C. 1742-1 Yamada, Kawagoe-Shi, Saitama-Ken, 350-0822 Japanphone: +81 49 227 9181fax: +81 49 227 9112
mexicOEJOT ATF Fasteners de México y Compañía, S. en C. División Fijaciones para la ConstrucciónAv. Del Siglo No. 180 Parque Industrial MillenniumSan Luis Potosí S.L.P.C.P. 78395 Méxicophone: +52 444 8 70 82 25e-mail: [email protected]: www.ejot-atf.com
nOrwAyEJOT Festesystem A/SAslakveien 20AN-0701 Oslophone: +47 23 25 30 40fax: +47 23 25 30 41e-mail: [email protected]: www.ejot.no
pOlAnDEJOT Polska Spółka z ograniczoną odpowiedzialnością Spółka komandytoUl. Jeżowska 9 PL-42-793 Ciasna phone: +48 34 351 06 60 fax: +47 23 353 54 10 e-mail: [email protected] Internet: www.ejot.pl
rOmAniAEJOT Romania SRLStr. Depozitelor 27RO-110078 Pitestiphone: +40 248 223 886fax: +40 248 223 887e-mail: [email protected]
russiAOOO EJOT WOSTOK105523 Moscow, RussiaSchelkovskoe highway, 100 bld. 1Office 5111phone: +7 495 259 09 09fax: +7 495 259 09 09e-mail: [email protected]: www.ejot.ru
serBiAEJOT Tehnika spajanja d.o.o. Autoput Beograd-Novi Sad 296X SCG-Serbia, 11080 Zemunphone: +381 11 748 60 82fax: +381 11 748 00 56e-mail: [email protected]
singApOreEJOT Asia Pacific Pte. Ltd.32 Old Toh Tuck Road#04-05 I.Biz CentreSingapore 597658phone: +65 65 62 8600fax: +65 65 62 8601email: [email protected]
slOVAkiAEJOT Slovakia, s.r.o.Juzná trieda 82 (Areál VSS)SK-04017 Košicephone: +421 55 622 17 60fax: +421 55 678 09 57e-mail: [email protected]: www.ejot.sk
spAinEJOT Ibérica, S.L.U.C/ Chile, 4 edificio II - oficina 30E-28290 Las Matas (Las Rozas) Madridphone: +34 916 300 822fax: +34 911 383 815e-mail: [email protected] Internet: www.ejot.es
sweDenEJOT Sverige ABSandtagsvägen 9S-70236 Örebrophone: +46 19 20 65 00fax: +46 19 20 65 28e-mail: [email protected]: www.ejot.se
switZerlAnDEJOT Schweiz AGUttwiler Strasse 3CH-8582 Dozwilphone: +41 71 414 52 22fax: +41 71 414 52 50 e-mail: [email protected]: www.ejot.ch
tAiwAnEJOT Taiwan Branch4No. 8, Aly. 81, Ln. 296, Xinya Rd., Qianzhen Dist. 80673 Kaohsiung, Taiwan, R.O.C.phone: +886 7 811 08 18e-mail: [email protected]
turkeyEJOT TezmakCebeci Cad. No. 84TR-34250 Küçükköy-Istanbulphone: +90 212 477 77 92-95fax: +90 212 538 00 93e-mail: [email protected]: www.ejot-tezmak.com
uniteD ArAB emirAtesEJOT Middle East FZESharjah Airport International Free ZoneP.O. Box 120588 SharjahUnited Arab Emirates phone: +971 6 557 97-70fax: +971 6 557 97-75 e-mail: [email protected] Internet: www.ejot.com
uniteD kingDOmEJOT U.K. Ltd.Hurricane CloseSherburn Enterprise ParkSherburn- in- ElmetGB- Leeds LS25 6PBphone: +44 1977 68 70 40fax: +44 1977 68 70 41e-mail: [email protected]: www.ejot.co.uk
usAEJOT Fastening Systems L.P.9900 58th Place, Suite 100Kenosha, Wisconsin 53144 USAphone: +1 262 612 35 50fax: +1 262 721 12 45e-mail: [email protected]: www.ejot-usa.com
www.globalfasteneralliance.com
EJOT Baubefestigungen GmbHIn der Stockwiese 35
D-57334 Bad Laasphe, Germany
Phone: +49 2752 908-0
Fax: +49 2752 908-731
E-Mail: [email protected]
Website: www.ejot.com
595-
EN
/0.5
/03.
17 |
I00
00
005
33