Ejection Scrapers

EJECTION SCRAPERS MODELS 850 | 1200 | 1450

IronWolf offers three models of forcedejection scrapers with capacities from 8-1/2 to 14-1/2 cubic yards, providing ver-satility to handle a variety of applications.

Primarily used in agriculture and small con-tractor industry, pull-type scrapers are one of the most efficient methods of earth moving and land leveling. They allow you to not only unload any material, but also level the materi-al as you unload.

IronWolf Ejection Scrapers are designed to be easily pulled with agriculture tractors. They can also be loaded with a track hoe or loader bucket and used as a dump truck with spreading capabilities.

When the work area is too wet to use a dump truck, a tractor and ejection scraper equipped with front dolly tires can get in and out easier. All scraper models from IronWolf offer front- and rear-wheel traction tires for superior

stability in the worst of work conditions.The Model 850 scraper is designed to be pulled easily behind a 120-HP agriculture tractor. Its 84-in cutting width is ideal for cleaning waterways and ditches.

The Model 1200 has a 12-1/2 cubic yard capacity and offers a wide 108-in cut. It works well for cutting terrace channels. Able to pack soil while ejecting each load, the Model 1200 is a workhorse to build ponds and dams.

The new Model 1450 has the same width of cut as the 1200, but offes a longer bowl — still easy to load, but carries more material. At the same time, its rugged construction al-lows this scaper to be pulled behind a 200- to 500-HP tractor with ease.

All IronWolf ejection scrapers can have a bracket mounted for GPS or laser capabilities. They work well for leveling fields, as well as maintaining good drainage.

APPLICATIONSR Building and Cleaning Ponds

R Building Pads for Residential or

Commercial Sites

R Maintaining Landfills

R Land Leveling for Field Irrigation

R Dam Construction

R Building Wetland Projects

R Road Construction

R Maintaining Feedlots

R Waterways and Terrace Channels

R Building Lagoons and Runoff Pits

A LOW CAPITAL INVESTMENT THAT RETAINS ITS VALUE FOR YEARS.

www.ironwolf.com | 405.872.1890

www.ironwolf.com | 405.872.1890

IRONWOLF RESERVES THE RIGHT TO MAKE CHANGES IN ENGINEERING, DESIGN AND SPECIFICATION; ADD IMPROVEMENT; OR DISCONTINUE MANUFACTURING AT ANY TIME WITHOUT NOTICE OF OBLIGATION. COPYRIGHT© 2016 IRONWOLF. ALL RIGHTS RESERVED.

Ejection Scrapers

MODEL 850 1200 1450

Weight 9,220 lb. 12,720 lb. 15,540 lb.

HP Required (Min) 120+ 200+ 200+

Capacity Heaped 8.5 Cubic Yds. 12 Cubic Yds. 14.5 Cubic Yds.

Capacity Struck 6.5 Cubic Yds. 9 Cubic Yds. 11 Cubic Yds.

Width of Cut 84" 108" 108"

Apron Clearance 46" 46" 46"

Ground Clearance 13" 18" 18"

Overall Width 96" 120" 120"

Overall Height 78" 97" 97"

Overall Length 25' 25' 6" 27'

Front Tires

Rear Tires

Reversible Center (1) 0.75" x 10" x 36" (1) 0.75" x 10" x 36" (1) 0.75" x 12" x 36"

Outer Reversible (2) 0.75" x 8" x 24" (1) 0.75" x 8" x 36" (1) 0.75" x 10" x 36"

Reversible Outer (2) 0.75" x 8" x 12" (2) 0.75" x 8" x 12" (2) 0.75" x 8" x 12"

H41 x 15-18 / 22 ply aircraft

*H40.5 x 14.5 x 19 / 24traction treaded

H44.5 s 16.5 - 21/32 ply aircraft

*46 x 18-20 traction / tread 32 ply

H41 x 15 -18 / 22 ply aircraft

*40.5 x 14.5 x 19 / 24 ply traction tread

20.00 X 20 ply aircraft

*20.00 x 20 traction / tread 26 ply

1600 R 20 G ply rating

20.5 x 25L2 tread 16 ply

MODEL 1450

MODEL 1200

MODEL 850

Cutting Edge

Cutting Edge

Wear Pads *optional tire available