EGX100 Firmware Click the Files tab to access the latest EGX100 firmware. EGX100 Version 3.000 Firmware This firmware version provides improved validation of the IP Address, and the IP Address / Subnet Mask combination. To properly update the EGX100: 1. Transfer the version 3.000 firmware file (eg03000.bin) to your computer. 2. Via FTP, copy the eg03000.bin file from your computer to the root directory of the EGX100. Do not remove power until programming is complete. Once the file transfer is complete, the EGX100 will automatically reboot. Refer to the EGX100 user’s guide if you need more information 3. Verify that the download was a success by browsing the Firmware Version in the ‘ Gateway Information’ section of the Diagnostics page. Note: During firmware updates, communication to serial devices through the EGX100 is not available.
EGX100 FirmwareClick the Files tab to access the latest EGX100
firmware.EGX100 Version 3.000 Firmware This firmware version
provides improved validation of the IP Address, and the IP Address
/ Subnet Mask combination.To properly update the EGX100:1.Transfer
the version 3.000 firmware file (eg03000.bin) to your computer.
2.Via FTP, copy the eg03000.bin file from your computer to the root
directory of the EGX100. Do not remove power until programming is
complete. Once the file transfer is complete, the EGX100 will
automatically reboot. Refer to the EGX100 users guide if you need
more information 3.Verify that the download was a success by
browsing the Firmware Version in the Gateway Information section of
the Diagnostics page. Note: During firmware updates, communication
to serial devices through the EGX100 is not available.
