Upload
indra-jeet
View
18
Download
0
Embed Size (px)
DESCRIPTION
AAAA
Citation preview
RN20024EN14GLN1
(E)GPRS Network Optimization
1
1 © Nokia Siemens Networks RN20024EN14GLN1
RN 2002(E)GPRS Explain: Chapter 4(E) GPRS Network optimization
RN20024EN14GLN1
(E)GPRS Network Optimization
2
2 © Nokia Siemens Networks RN20024EN14GLN1
Legal Notice
Intellectual Property Rights
All copyrights and intellectual property rights for Nokia Siemens Networks training documentation, product documentation and slide presentation material, all of which are forthwith known as Nokia Siemens Networks training material, are the exclusive property of Nokia Siemens Networks . Nokia Siemens Networks owns the rights to copying, modification, translation, adaptation or derivatives including any improvements or developments. Nokia Siemens Networks has the sole right to copy, distribute, amend, modify, develop, license, sublicense, sell, transfer and assign the Nokia Siemens Networks training material.
Individuals can use the Nokia Siemens Networks training material for their own personal self-development only, those same individuals cannot subsequently pass on that same Intellectual Property to others without the prior written agreement of Nokia Siemens Networks .
The Nokia Siemens Networks training material cannot be used outside of an agreed Nokia Siemens Networks training session for development of groups without the prior written agreement of Nokia Siemens Networks.
RN20024EN14GLN1
(E)GPRS Network Optimization
3
3 © Nokia Siemens Networks RN20024EN14GLN1
Module objectives
After completing this learning element, the participant will be able to:
Theory:
• Sketch the (E)GPRS Optimisation process and the main optimisation tasks• List the most important tools for (E) GPRS planning and optimisation• Know some important KPIs
RN20024EN14GLN1
(E)GPRS Network Optimization
4
4 © Nokia Siemens Networks RN20024EN14GLN1
(E)GPRS BSS Network Optimization - Structure
GSM Network Optimization• Coverage maximization • Interference reduction• Capacity optimization (air interface and connectivity)
(E)GPRS Network Optimization• Signaling capacity & resource allocation improvement• Data Rate
– Connectivity Capacity (MS-SGSN)– TSL data rate improvement and multislot usage maximization (BSS)– End to End (E2E) data rate (applications)
• Mobility improvement
RN20024EN14GLN1
(E)GPRS Network Optimization
5
5 © Nokia Siemens Networks RN20024EN14GLN1
GSM Network OptimizationThe optimal GSM network from PSW services point of view has: As high signal level as possible• It means that even the indoor signal level should be high enough to have MCS9 for getting the highest
data rate on RLC/MAC layer.As low interference as possible • The aim of having high C/I is to avoid throughput reduction based on interference. Enough capacity• Enough BSS hardware capacity (interface and connectivity) is needed to provide the required capacity for
PSW services in time. Both CSW and PSW traffic management should be harmonized with the layer structure and long term plans.
As few cell-reselection as possible• The dominant cell coverage is important to avoid unnecessary cell-reselections for mobility. The PCU
allocation can help to reduce the inter PCU cell reselections. • Dominant cell structure can help to maximize the signal level and reduce the interference, too.Features• All the features should be used which can improve the PSW service coverage, capacity and quality in
general. Examples:– Since S14 it is possible to use (E)GPRS on DFCA TRXs– The (E)GPRS coverage can be used in the extended area
Before any (E)GPRS optimization related activities the GSM network should be optimized!!!
RN20024EN14GLN1
(E)GPRS Network Optimization
6
6 © Nokia Siemens Networks RN20024EN14GLN1
GSM Network Optimization - features
The following information should be collected related to the volume of network element and connectivity usage of network elements:• of BSCs• # of PCU/BSC ratio• # of BCF/PCU ratio• # of Cells/PCU• # of Abis TSLs/PCU • # of DAP/PCU• Average DAP size/BCF• # of Gb links size/PCU or PSEThe connectivity limits can be estimated based on the list above.
The following information should be collected related to terminals used in the network:• Ratio of AMR capable terminals• Ratio of R97, R98, R99, R4, R5, R6, R7 capable terminals• Ratio of the different tsl capability terminals (like 1+2, 4+2, dual carrier capable, etc)The capacity requirements and feature possibilities can be analyzed by the list above
RN20024EN14GLN1
(E)GPRS Network Optimization
7
7 © Nokia Siemens Networks RN20024EN14GLN1
(E)GPRS Network Optimization - Netact
BSCNetAct
Measurement data
Measurement administration
NetAct Reporter is a family of applications for processing, analysing, and visualising performance data that is coming from different sources. Raw data becomes meaningful information that is visualised in graphical and textual reports. NetAct Reporter gives a view of the network and service performance and makes it possible to analyse network data, create reports based on the data and distribute the information.
RN20024EN14GLN1
(E)GPRS Network Optimization
8
8 © Nokia Siemens Networks RN20024EN14GLN1
(E)GPRS Network Optimization - KPI
NetAct reporter counter and KPI analysis gives exact picture about network performance.The analysis of KPIs can be based on the following list:Signaling related KPIs
CCCH usage and congestionTRXSIG congestionBCSU load
Data rate and Territory related KPIsNetwork usage (RLC Payload, Packet Erlangs, etc)Data rate (CS - MCS selection, retransmission, UL BLER, throughput, etc.)Blocking (timeslot sharing, soft blocking, hard blocking, EDAP congestion, PCU congestion, Gb congestion, etc)
Mobility related KPIsTBF release due to flash
Features like NCCR and NACC will not only increase the performance of the network in general, additionally better statistics will get available, helping again to increase the performance of the system!
RN20024EN14GLN1
(E)GPRS Network Optimization
9
9 © Nokia Siemens Networks RN20024EN14GLN1
Tools for (E)GPRS Planning
The field measurements and drive tests are usually used for analyzing accessibility, data rate measurements in stationary and mobility environment to see the end-users perception.
PSW (Packet Switched) accessibility analysis The PSW accessibility measurements measure the success rate and time period of access to
the PSW core (GPRS attach and PDP context activation), as well as the access to BSS (TBF establishment).
- Accessibility measurements contain GPRS attach/detach, PDP context activation and TBF establishment/release measurements.
- The attach/detach, PDP context activation/deactivation and Routing Area Update are LLC related measurements (MS-SGSN) and can be measured and trouble shooted.
RN20024EN14GLN1
(E)GPRS Network Optimization
10
10 © Nokia Siemens Networks RN20024EN14GLN1
TCP/IP measurements Useful commands in IP networks to estimate end to end performance:1. Ping: The command Ping can be used to check the network Round Trip Time to one or several remote hosts. The command runs an application which generates an ICMP (Internet Control Message Protocol) Echo Request data packet (this is an IP packet with Protocol = 1, Type field = 8) which is sent to the host. An Echo Reply is expected from the host (this is an IP packet with Protocol = 1, Type field = 0
Example: Ping 0.0.0.0 – 1000 where 0.0.0.0 is an IP address and 1000 the size of the ping package in Bytes
2. Tracert: The Tracert (trace route) tool checks the route to a destination by sending ICMP (Internet Control Message Protocol) Echo Request data packets with different TTL (time to live) values starting with TTL=1 for the first packet, then TTL=2 for the next packet,…
Example: tracert 0.0.0.0 where 0.0.0.0 is an IP address3. PathPing: The tool PathPing extends the features of the Ping and Tracert commands and offers more information than those commands do.During a certain time, data packets are sent to each node contained in the path to a certain destination. Statistics are calculated based on the data packets which are sent back from these nodes. Since the PathPing command shows losses of packets for each of the nodes and each connection, this command can be used to localize those nodes and/or connections making problems.
Example: pathping 0.0.0.0 where 0.0.0.0 is IP address
RN20024EN14GLN1
(E)GPRS Network Optimization
11
11 © Nokia Siemens Networks RN20024EN14GLN1
Throughput analysis – Stationary- Average throughput (RLC/MAC and Application)- MCS distribution- RX Level- BLER - C/I ratio
Throughput analysis – Mobility (intra/inter PCU and RAU cell-reselection)- Cell reselection latency
- RLC/MAC- LLC- Application level
- Retransmission based on cell reselection
The throughput analysis is always the analysis of signal level and C/I, because low data rate can be caused by signal, capacity and interference issues
Tools for (E)GPRS Planning
RN20024EN14GLN1
(E)GPRS Network Optimization
12
12 © Nokia Siemens Networks RN20024EN14GLN1
Tools for (E)GPRS PlanningAs supplement to drive tests from network side protocol analyzer provide real-time monitoring and analysis on different interfaces. Several vendors supported by NSN-Nethawk-Tektronix-AgilentOther post-processing tools can help to analyze the measurements captured by the drive test tools, protocol analyzers and application testers.