Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
EFFICIENT PRESSURE BOOSTING MADE SIMPLEBY GRUNDFOS
GRUNDFOS HYDRO MULTI-E
GRUNDFOS HYDRO MULTI-E
2
COMPOUND ENERGY SAVINGS AT PART LOAD OPERATIONThe story behind the savingsMany pumps system applications have a variable flow rate requirement and spend the majority of operation time in a much lower part load condition compared to design condition. Multiple pump systems offer increased hydraulic efficiency at part load.
The Grundfos ECM MLE motors exceed IE5 motor efficiency standards, set by the International Electrotechnical Commission, currently the highest efficiency level worldwide for electrical motors. NEMA premium efficient motors are equal to IE3 level, so these motors represent two levels above NEMA premium. The result of this increased efficiency is reduced energy consumption/operating costs by 7-9%, based on a typical domestic water load profile.
Efficiency Comparison between Conventional and Grundfos MLE Motors Motors are 460-480V, TEFC
ECM MLE vs. NEMA Premium Motor/VFD Comparison
0102030405060708090
100
0 20 40 60 80 100
Com
bine
d V
FD/M
otor
E�
cien
cy
Percent Rated HP
ECM vs. NEMA Premium Motor/VFD Comparison
ECM VFD/MotorNEMA Premium Motor/VFD
INCREASED EFFICIENCYAT PART LOAD OPERATION
COMPOUNDED ENERGY SAVINGS AT PART LOAD OPERATION
PARTLOAD VS. FULL
LOAD
H
Q
Design ConditionPEAK
OPERATION TIME
HP
TEFC Motor + Conventional VFD Grundfos MLE
NEMAPremium(IE3) Eff.
TypicalVFD
Efficiency
CombinedMotor+VFD
Efficiency
MLEIE5
Efficiency
EfficiencyIncrease
2 85.5 97.0 82.9 89.4 6.5
3 86.5 97.0 83.9 90.7 6.8
5 88.5 97.0 85.8 92.5 6.7
7.5 89.5 97.0 86.8 92.4 5.6
10 90.2 97.0 87.5 92.5 5.0
15 91.0 98.0 89.2 93.2 4.0
GRUNDFOS HYDRO MULTI-E
3
PLUG AND PUMP WITH HYDRO MULTI-EGrundfos Hydro Multi-E pump systems are ideal for pressure boosting of clean water in places such as:
System control interfaceAdvanced control interface installed in one pump. The control interface allows all control variables to be configured or viewed. With addition of flow measuring, system specific energy (kWh/gallon) can be displayed directly from control interface.
Single point power connectionThe Hydro Multi-E offers a single point power connection disconnect panel and has individual pump disconnects for servicing pump while Multi-E system is in operation.
100% redundancyAll motors on system are capable of system control. Two sensors are installed as standard resulting in 100% system control redundancy.
Product Range 2 & 3 Pumps (CRE3 - CRE20)
Max Flow, Q: 460 gpm
Max Head, H: 475 ft
Liquid Temperature: +32°F to +176°F
Working Pressure: max. 232 psi
FUNCTIONALITYThe New Hydro Multi-E pump system offers a list of new functions and features.
• Redundant master motors• Redundant sensors• IE5 motors, two levels above NEMA premium• GO communication possible• Customer defined standby pumps• 2 digital inputs & outputs• 2 analog inputs• Limit exceed functions• Optional built in Field-BUS Communication• Optional sensor for dry-run protection• Pipe filling function• External setpoint influence• DP control using two sensors, discharge/suction subtraction• Predefined setpoint – makes it possible to remotely switch
between different predefined setpoints.• Pulse flow meter – makes it possible to measure the flow and
show specific energy (kWh/gallon)
• Apartment Buildings• Hotels
• Industry• Hospitals• Schools
0 50 100 150 200 250 300 350 400 450 500Q [US GPM]
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480[ft]H
0 10 20 30 40 50 60 70 80 90 100 Q [m³/h]
10
20
30
40
50
60
70
80
90
100
110
120
130
140
[m]H
Hydro Multi-ECRE
ISO 9906:2012 Annex A
CRE 20CRE 15CRE 5 CRE 10CRE 3
The
nam
e G
rund
fos,
the
Gru
ndfo
s log
o, a
nd b
e th
ink
inno
vate
are
regi
ster
ed tr
adem
arks
ow
ned
by G
rund
fos H
oldi
ng A
/S o
r Gru
ndfo
s A/S
, Den
mar
k. A
ll rig
hts r
eser
ved
wor
ldw
ide.
L-H
ME-
SL-0
1 10
-17
GRUNDFOS Americas2001 Butterfield Rd, Ste 1700 Downers Grove, IL 60515
www.grundfos.uswww.grundfos.cawww.grundfos.mx
About GrundfosIf you are looking for a competent partner for your pump requirements, Grundfos fits the label. We have produced high-quality industrial pumps for more than half a century. Every solution is backed by solid knowhow and a desire to constantly push the boundaries in innovative pump technology.
The range of booster pumps is a result of our commitment to excellence, offering reliable, efficient performance in a variety of applications, including:
• High rise buildings
• Irrigation systems
• Booster substations
• General buildings like offices, schools, hospitals and apartments.
As a truly global company, Grundfos is present in over 55 countries around the world. Wherever you are based, extensive pump and pump application knowhow is available to you in your local language.
Explore the complete Grundfos portfolio at www.grundfos.us.
GRUNDFOS TECHNICAL INSTITUTEThe Grundfos Technical Institute (GTI) offers busy professionals the opportunity to enhance their professional knowledge and maintain continuing education credits through a wide variety of flexible learning avenues.
Visit www.grundfos.us/training, to choose from a number of education possibilities that suit your needs and schedule, including face-to-face classes, group webinars and self-directed online courses.