EEVX.1_rhrter

Xpedition Enterprise Flow Release Highlights

Software Version X-ENTP VX.1 November 2014

2014 Mentor Graphics Corporation All rights reserved.

This document contains information that is proprietary to Mentor Graphics Corporation. The original recipient of this document may duplicate this document in whole or in part for internal business purposes only, provided that this entire notice appears in all copies. In duplicating any part of this document, the recipient agrees to make every reasonable effort to prevent the unauthorized use and distribution of the proprietary information.

This document is for information and instruction purposes. Mentor Graphics reserves the right to make changes in specifications and other information contained in this publication without prior notice, and the reader should, in all cases, consult Mentor Graphics to determine whether any changes have been made.

The terms and conditions governing the sale and licensing of Mentor Graphics products are set forth in written agreements between Mentor Graphics and its customers. No representation or other affirmation of fact contained in this publication shall be deemed to be a warranty or give rise to any liability of Mentor Graphics whatsoever.

MENTOR GRAPHICS MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

MENTOR GRAPHICS SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR RELATED TO THIS PUBLICATION OR THE INFORMATION CONTAINED IN IT, EVEN IF MENTOR GRAPHICS CORPORATION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

RESTRICTED RIGHTS LEGEND 03/97

U.S. Government Restricted Rights. The SOFTWARE and documentation have been developed entirely at private expense and are commercial computer software provided with restricted rights. Use, duplication or disclosure by the U.S. Government or a U.S. Government subcontractor is subject to the restrictions set forth in the license agreement provided with the software pursuant to DFARS 227.7202- 3(a) or as set forth in subparagraph (c)(1) and (2) of the Commercial Computer Software - Restricted Rights clause at FAR 52.227-19, as applicable.

Contractor/manufacturer is: Mentor Graphics Corporation

8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. Telephone: 503.685.7000

Toll-Free Telephone: 800.592.2210 Website: www.mentor.com

SupportNet: www.mentor.com/supportnet Contact Your Technical Writer: www.mentor.com/supportnet/documentation/reply_form.cfm

TRADEMARKS: The trademarks, logos and service marks ("Marks") used herein are the property of Mentor Graphics Corporation or other third parties. No one is permitted to use these Marks without the prior written consent of Mentor Graphics or the respective third-party owner. The use herein of a third- party Mark is not an attempt to indicate Mentor Graphics as a source of a product, but is intended to indicate a product from, or associated with, a particular third party. A current list of Mentor Graphics trademarks may be viewed at: www.mentor.com/terms_conditions/trademarks.cfm.

End-User License Agreement: You can print a copy of the End-User License Agreement from: www.mentor.com/terms_conditions/enduser.cfm.

Introduction This document provides a high-level summary of the Xpedition Enterprise VX.1 release. It includes a summary of the new features in this release, any authorization code changes required, any major installation changes, and any transitioning issues you should be aware of before installing. Additionally, any last minute issues found in the final stages of testing are included.

This document is located on the top level of the CD and on SupportNet. Changes may be added to this document after the release. Refer to the Release Highlights documentation on SupportNet for the most up-to-date release information.

New Features

xPCB Layout (Expedition PCB) Expedition and Xtreme PCB has been enhanced with a number of new features that improve product usability and efficiency. Details of the following changes can be found within the following presentations.

Xpedition xPCB Layout VX.1

Xpedition Layout Differences VX.1

Xpedition 3D-Component Import

Xpedition 3D Designer

Xpedition 3D Multi-board

Mentor Graphics 3D Library

Searching Mentor 3D Library from Xpedition Layout xPCB Layout Feature Videos

General Environment

Context-based selection and editing

Selection and Editing: Access crucial design information with cursor intelligence

Editing Drawing Objects

Component Management, Xpedition planning and placement

Planning group management

Physical circuit groups and manipulation, PCB planning and placement group manipulation

Real Trace Plow: Auto-active PCB trace routing mode

High-speed routing: High-speed PCB routing for tuning high-speed connections

Dynamove, dynamic object movement

Sketch Routing

xDX Designer (DxDesigner) xDX Designer has been enhanced with a number of new features that improve product usability and efficiency. Details of the following changes can be found within the xDX Designer Release Highlights.

xSD System Designer xSD Systems Designer is a new product in the Mentor portfolio which extends the PCB design flow into multi-board electronic systems definition, partitioning, optimization and implementation. It provides automated data and connectivity management capabilities for both multi-board system definition and implementation, significantly reducing design time while increasing overall quality and reducing schedule risks. Innovative connectivity creation and management capabilities reduce the need for manual synchronization of inter-board connectivity, ensuring the integrity of the design. Fully integrated into the Xpedition PCB design flow through xDM Design, Mentors unique work-in-progress data management hub, xSD Systems Designer provides a unique environment for system specialists, hardware engineers, PCB designers, as well as cable and harness designers to develop complex multi-board systems in a fully concurrent engineering environment. To get an overview of the product concept and description of features please look at the web seminars, product demos and other material available on the Mentor Graphics website.

Contraint Manager (CES/iCES) Constraint Manager has been enhanced with new features that improve product usability and efficiency, and a new resource to help new users get on board with our constraint system. Details of the changes can be found within the Constraint Manager Release Highlights.

xDM Library (DMS) xDM Library (DMS) has been enhanced with a number of new features that improve product usability and efficiency. Details of the following changes can be found within the xDM Library Release Highlights. xDM Design (EDM) xDM Design (EDM) is available to all Xpedition flow customers in VX.1and has been enhanced with a number of new features that improve product usability and efficiency. Details of the following changes can be found within the xDM Design Release Highlights. For overview of the product, please refer to the Mentor Graphics website

System Utilities Toolbox for xDM Server Configuration

Oracle Connection, Improved Configuration, Test, and Diagnostic Monitoring o Pre-Test and Diagnostic monitoring of Oracle Configuration and Connection

Active xDM Server and Data Directories outside of Install Tree o Avoidance of changes to the install tree as good Enterprise software solutions

require Diagnostics

Diagnostic Dashboard, Web Presentation Advanced Diagnostic Capabilities for xDM Server monitoring, with plug-in

framework support Summary Page

o Web Page with over-all summary of xDM Server status and diagnostic summary Historical Event & Timeline Presentation

o Recording, monitoring, and reporting of key life-cycle events for xDM Server with graphical timeline presentation

xDM Server Status and General Information o Similar to DiagServerStatus, but presented within Diagnostic Dashboard

Dashboard Panels with expanded details, on-off capabilities o Display of multiple diagnostic key monitor and test results for the xDM Server.

Collection option to send data to Mentor Graphics with IP masking o Dashboard option that will collect all data contributing to Dashboard so that

Mentor or others can also view non-IP information Troubleshooter Integration

o Interaction between Dashboard and Troubleshooter Utility to help triage issues the Dashboard detects

Diagnostic Configuration Page o Dashboard Port and Alert Manager Configuration plus Diagnostic Panel on-off

Features

Integration Log File Collection Interface o Direct access to DiagCollectLogs utility from within Dashboard

Diagnostic Alert Manager SMTP Feature

o Mechanism in which events that trigger alerts can be email to a distribution list to make IT Administrators aware of issues

Configurable Alerts o XML file containing alert events with option for IT Administrator to customize

time or events On-Off Option

o Option to turn on and off the Alert Manager Log File Scanner & Monitor

Inclusive of Error Filter Feature o Ability to provide regular expression of log file errors that customer wishes to

ignore Security Monitoring, SSL Resources

Diagnostics to monitor the SSL resources associated to xDM Server, both external utility and Dashboard presentation

xDM Server Uptime Information Utility to report the xDM Server and associated resources uptime as well as

presentation within Dashboard Performance Monitoring

Active Bean Pool Threads o Monitoring of the xDM Server's Active Bean Pool, with alert if threshold is met.

Active Database Connections o Monitoring of the xDM Server's Active Database Connections, with alert if

threshold is met. Database Creation Time

o Monitoring of the xDM Server's Database Creation Time, with alert if threshold is met.

%age of Host Machine Memory in Use o Monitoring of the host machines %age of memory use, with alert if threshold is

met. Backup & Restore Information

Utility to report backup and restore history, with panels of information within Dashboard as well

Improved performance for CollectLogs and Troubleshooter Speed and memory improvements for both DiagCollectLogs and DiagTroubleshooter

Utilities Improved disk space, directory access, and RAM pretests

Management

Backup & Restore Management Improvements Number of improvements within the Backup and Restore utilities for customer's

benefit

Deployment Support for Java 8 based policy files Secure SMTP connection

Valor NPI The following new features are available in this release.

The main application tree is now version specific, VNPI_94, and the executable directory is now generically named, edir. Refer to the section Application Protection in a following section for more information.

Support for ODB++ Version 8 Improve ODB++ export functionality in the support ODB++ version 7 True 64 bit application support

o Enlarges the available memory from 4 GB to 1024 GB. Partial BOM generation from Expedition designs Automated component properties to attribute assignment New designer focused DFF functionality activated directly from Expedition (Valor-NPI

DFF) MRA

o Report generation o View by Category o Define which checklists which are not to be read by the MRA o Manage, create and execute checklists o Measurement tool improved

Multiple DFM analysis improvements o Location of narrow rectangular disconnected surfaces (IDEA-8466) o Through hole space from land pattern on opposite side of placement (IDEA-9115) o Small pad size report per component placement (IDEA-8523) o Improved on the DFM handling of vias location in copper lugs found underneath

a component o Improved silkscreen analysis to consider reference designators distance when

collected together within a bound box o Enhanced Solderpaste analysis to locate potential bridging between vias and

copper areas most commonly under components o Enhanced Soldermask analysis to located areas where planes are exposed. o Enable component shields to be used for height validation o HDI Signal and Soldermask analysis can now treat teardrop line segments as

either fillets or lines.

The addition of a Sharelist item now includes the overview section indicating the location of the hazard on the product model

Lean NPI Electronic Documentation Replacement o Product Model summary data can now be passed through the Mentor flow into

fabrication and assembly. o This includes previously documented content such a silkscreen and soldermask

requirements, UL or Lead-free requirements, test requirements, board, copper and dielectric thickness, etc.

Selected Design Center is now present on the title bar of the Design Process Wizard CAM Compare can now compare two ODB++ product models Search by pin name has been extended to work by reference designator, part number, or

package and will result in the highlighting of the specific pin Several new mouse behaviors were added to the graphic areas. Enhance Assembly Board Merge to work with multiple solderpaste locations for a single

pin (IDEA-8256) Output Automation now has additional variables for use while customizing templates Mentor CCE Output IPC-2581 Input Management of miscellaneous layer types during the board flipping process. Mentor ODB++ Viewer

o Measurement tool improved o Search by pin name has been extended to work by reference designator, part

number, or package and will result in the highlighting of the specific pin o The ability to snap to feature, edge, grid, etc. is available. o Unified highlight net interface

A number of Mentor Boardstation and Zuken Board Designer interface improvements.

General Information for VX.1 Xpedition Enterprise 64 bit information The Xpedition Enterprise VX.1 release supports both native 32-bit and 64-bit for both Windows and Linux operating systems. The 32-bit compiled version will run on either a 32-bit or 64-bit Operating System. However, the native 64-bit compiled version is only compatible with 64-bit Operating Systems.

NOTE: The Mentor Install Program will prevent native 64-bit compiled programs from being installed on 32-bit Operating Systems

NOTE: The following products, xDM Server, xDM Library Server and System Utilities Toolbox, are only available on the native 64-bit installation. Beginning with the VX.1 release, only 64 bit is supported for the server of xDM Library and/or xDM Design in order to provide optimum performance and stability. We continue to support clients on 32 bit thus clients can be either 32 bit or 64 bit. If both native 64-bit and 32-bit applications are to be loaded onto the same 64-bit Operating System, they must be installed into separate target directories to ensure the applications find and load the corrected run time libraries. NOTE: The Mentor Install Program will not allow native 32-bit and 64-bit applications to be installed into the same target directory. NOTE: The project and design data models on disk are the same for both 32 and 64-bit applications.

Xpedition Enterprise 64-bit Flow VX.1 Xpedition Enterprise Automation

VX.1 Automation

NOTE: The following products are not available on the native 64-bit installs and are available on a separate media (Addon for 64 Bit) download on SupportNet. This supplement release is intended for customers who have installed the 64-bit X-ENTP VX.1 application software. It contains 32-bit application software for the following products that are not included on the 64-bit media: These products are:

Allegro to Xpedition Layout and Library Translators xPCB CAM Output Manager xPCB EDIF Schematic Interface xPCB Report Writer SymGen CellGen

This supplement release must be installed in a separate target from your 64-bit X-ENTP VX.1 application software. These products are all included in the 32-bit X-ENTP VX.1 application software media. You should not install this supplement if you installed your application software from that media set.

2

Note that when you install these products on Linux platforms, you must install the 32-bit OS libraries. See the section on platform requirements for your platform.

Graphics Card and Driver Version The following graphics cards and drivers were used when testing the X-ENTP VX.1 release of Xpedition and Xtreme PCB:

GFX card Platform

RHEL5 64 RHEL6 32 RHEL6 64 SuSe11 64 W7 64 WIN 2012

AMD Radeon HD 5770 9.012 --- 13.352.1009 --- 14.10.1006 ---

AMD Radeon HD 5830 --- --- 13.352.1009 --- 14.10.1006 ---

AMD FirePro V5900 --- --- 13.352.1009 13.352.1009 13.352.1009 ---

AMD FirePro V7900 --- 13.352.1009 13.352.1009 --- 13.352.1009 13.352.1009

AMD FirePro W7000 --- --- 13.352.1009 --- 13.352.1009 ---

NVidia Quadro NVS 295 --- --- 340.24 --- 337.88 ---

NVidia Geforce GTX460 340.24 --- 340.24 --- 337.88 ---

NVidia Quadro 600 --- --- 340.24 340.24 337.88 ---

NVidia Quadro 2000 --- 340.24 340.24 --- 337.88 337.88

NVidia Quadro K2000 --- --- 340.24 --- 337.88 ---

Intel HD Graphics --- --- --- --- 8.15.10.2014 ---

In the process of validating this release weve found that you can try the following steps when you notice performance problems in certain situations:

1. When running on Linux with some NVidia drivers: Uncheck the Sync to VBlank option.

2. When running on Linux in GDI mode using some AMD drivers: Enable OpenGL or use the default system driver.

3. When running on Windows in GDI mode with Aero enabled: Enable OpenGL or disable Aero.

Please join our graphics hardware and driver community to share tips or problems and be notified of any issues that we find and the solutions we are able to provide: http://communities.mentor.com/mgcx/community/pcb/expedition/graphics_hardware_drivers

Licensing The license consumption model has changed in the X-ENTP XV.1 release. Applications that previously checked out licenses using a set of values consisting of user/host/display now check out licenses using user/host/design_project. For more detail, please refer to TechNote MG588427 (https://supportnet.mentor.com/portal?do=reference.technote&id= MG588427) License server must be upgraded to Mentor Licensing v2013_2 In order to run VX.1, your license server must be upgraded to run Mentor Licensing v2013_2. All products contained in VX.1 Flow are using v2013_2 and it is delivered with this install. However, license servers that are being used by the VX.1 products that would not otherwise be impacted by the install must also be upgraded to run this version of Mentor Licensing. The upgrade can be loaded from the install media onto your license server via the Manage Licensing option on the main install menu. Alternatively, the licensing software can be separately downloaded from SupportNet at http://supportnet.mentor.com/portal?do=releases&id=201305039&prod=C106-S128-G159-P11292. Note that this version of licensing will update the license server to use FlexNet v11.11.1.1, as well as delivering the compatible version of the Mentor licensing daemon. It does not require regeneration of existing licenses.

Authorization Codes To use the latest releases, you must be on support contracts for these products as of August 2014. For more information about "Exact Access" authorization code formats, see the explanation on SupportNet at:

http://www.mentor.com/supportnet/process_policy/exact_access.html

You may download your site's existing authorization codes from SupportNet at:

http://www.mentor.com/supportnet/licenses

Two new authorization codes have been added to enable the Assembly Panel Design module, vlrnpiseatapd or vlrnpistnapd and are available with purchases of new vSeat and vStn Assembly Panel Design products.

4

Installation Information

Documentation Delivered in a Separate Install Download With this release of Xpedition Enterprise Flow, product documentation is provided as a separate download from the software. This requires two separate downloads and installs of the complete Xpedition Enterprise Flow:

Download and install product software Download and install product documentation.

You are given the option of performing a Typical Install of the software and documentation to a single location. This option most closely resembles the install you may be familiar with if you have previously installed Mentor Graphics products. Both software and documentation reside on the same computer. Refer to Installing Mentor Graphics Software and Documentation in the Managing Mentor Graphics Systems Software manual for more information.

Shared Documentation Installation

As a second installation option, you can install the software and specify a shared documentation location from the software install(s). The following are points for consideration with this choice:

You want to install the documentation to a single location and allow multiple software installs access to that documentation location; documentation does not have to be installed on every computer. The documentation tree is self-contained so you can have software installs on different platforms (Windows, UNIX, and Linux) access the documentation from a single location. For example, you have installed the documentation on a UNIX server; software installs on Windows, Linux, and UNIX can access the documentation from this one UNIX server. The documentation can be installed to a web server (as the shared documentation location) as long as it is within your companys firewall (think same city, same campus).

Refer to Installing Mentor Graphics Software and Documentation in the Managing Mentor Graphics Systems Software manual for more information.

The Mentor Graphics Documentation System

This release includes the updated v3 Mentor Graphics Documentation System. The System consists of a search and navigational interface called InfoHub, and documents in PDF and HTML formats.

NOTE: An updated v3 movie is available on SupportNet (accessible from this link and from the InfoHub Overview link in the InfoHub footer). Watch the movie for an overview of highlights and tips on getting the most from InfoHub.

InfoHub Enhancements Substantially improved search performance. Refined search algorithm, to increase relevancy of hits. Results list appears within InfoHub (instead of the Search tab in the sidebar of a document.

Additional results list improvements: o SupportNet-like results, with filtering options, snippets, and page navigation. o contextual links to submit searches to SupportNet, for quick access to content not

available in InfoHub. New Release Information scope enables you to quickly scan the available release content,

as well as other materials pertinent to the release. New My Document List scope enables you to create a custom list of documents for quick

access to documents and enhanced searching. Custom tab displayed by default enables you to add links to the Custom tab of InfoHub to

customize the interface.

Custom Tab Effective in v3, the Custom tab displays by default. Use this tab to customize the InfoHub experience by providing company-specific links to information. To learn how to customize the Custom tab, click the Custom Tab link in the InfoHub footer.

HTML Document Enhancements Substantially improved search performance and other enhancements:

o search limited to current document only. o filtering options. o search snippets display by default. o results list page navigation. o contextual links to submit searches to SupportNet, for quick access to content not

available in InfoHub. Support for native browser bookmark/favorites. Refined index navigation index entries limited to current document only.

Providing Feedback We welcome your feedback on the documentation system. You can access the feedback form in multiple ways, for example:

Click Feedback in the button bar of HTML documents. Click Documentation Feedback in the Bookmark list of PDF documents.

6

If interested, you can discuss your feedback with the technical writer responsible for the documentation for your product line.

Additional Release Notes and Workarounds The following three files/products will report errors during Verify:

xDM Library

xDM Library Cache Manager

xDM Library Server

This is due to the files being modified during the installation process and do not represent a potential installation issue.

xDX Designer Color Scheme

From the VX.1 release onward it will be possible to install more than one version of Mentor Graphics PCB software. In order to support these side-by-side installs each release has its own unique WDIR directory for its configuration settings. At installation time you will be prompted to copy the content of your previous WDIR to this new version specific WDIR. Also in the VX.1 release we are promoting a new enhanced color scheme with a white background as the default setting in xDX Designer when the product is installed. If you wish to retain your previous color scheme you may do so by selecting the option to copy the previous WDIR contents at the time you install VX.1. If you do not copy the previous content of your WDIR directory to the VX.1 WDIR directory but still wish to change the color scheme to the EE7.9.x colors you may do so by selecting a scheme in Settings Display Objects. The default EE7.9.x color scheme name is Expedition.dxc. If you have a customized color scheme it should also be listed in this dialog. On Linux you will not have the option to copy the previous WDIR content. To restore your previous color scheme you may manually copy the content of your previous WDIR to the new VX.1 WDIR or change the scheme in Settings Display Objects. For both Windows and Linux we include a utility to revert the new color scheme to the default Expedition color scheme (this will not restore any custom color scheme you may be using). Under Windows this new command must be run from within an MGC Console window (accessible from the Start Menu All Programs Xpedition Enterprise VX.1.. - Administrative Tools MGC PCB Command Window VX.1). mgcmd> c:\MentorGraphics\EEVX.1\SDD_HOME\wv\win32\bin\whitebackground.exe off

Under Linux this can be run from a terminal window directly: /common//bin/ whitebackground off

ODBC Connections

Installation of 64 bit applications are incompatible with 32-bit Microsoft ODBC Drivers (Access and Excel) If using a 64-bit version of the Mentor Tools then 64-bit ODBC drivers must be installed

- 64-bit drivers can be downloaded from the Microsoft web site If using MS Access or MS Excel as a data source then either:

a. The 64-bit version of Microsoft Office should be installed to support compatible drivers No version of Office is installed on the client and 64-bit drivers are be installed

HyperLynx Analog

HyperLynx Analog will not work with RHEL 6.0 or higher, if the qualified version of ADMS (2010.2A) is running.

Suggested grid color settings for the new Lined Grid in DxDesigner?

For customers using their own color schemes and settings it is suggested that the new lined grid be set with the following values, though users may of course set their own values. The following entries are suggested for the settings within the color scheme settings file (*.dxc file). For white backgrounds For black backgrounds Notes on supported characters for object names in DxDesigner?

DxDesigner is able to support a large number of special characters for net names and object names though some of these may prevent downstream tools such as Simulators and net list outputs from working. For this reason it is suggested that the following characters be avoided in the name attribute.

For nets

@ $ space \ / * % #

For blocks

/ \ space * % < > ? , =

8

Can Smart Utilities be installed on a PC with multiple SDD flow versions? (Windows) Yes, if you have completed the procedure in the table below. Smart Utilities version SU2007.4 or earlier cannot be switched using MGC SDD Configurator. To install Smart Utilities in the environment with multiple Smart Utilities versions, take the following procedure and switch the version.

*1 EE200

7.7(+) Smart Utilities version EE2007.7 or later. *2 SU2007.4(-) Smart Utilities version SU2007.4 or earlier. Executable and Batch Files The executable and batch files described in the table above are stored in the following location.

\win32\configurator.exe \2007(.n)EE\SDD_HOME\SmartUtilities\startup\DisableSmartUtilities.bat

Note: (.n) represents the installed SDD flow version. Where can I find application program interface documentation for DxDesigner?

Please refer to the Automation and Scripting InfoHub, which includes automation documentation for DxDesigner, CES, Expedition PCB, and other applications. All automation reference titles are provided in PDF and HTML formats.

What are the recommended Central Library permissions?

To prevent individuals from making changes to a Central Library but still allow Read access for viewing library data, the Central Library must be loaded on a Windows NTFS or Linux/UNIX OS disk. All files, whether they are on Windows or Linux/UNIX, should have Write permission except for individual library files, which can be write-protected as desired to control access.

Note: Windows users can use the Properties/Security dialog box and Linux/UNIX users can use the chmod command to adjust Central Library permissions to corporate guidelines. Files that can be permission-controlled are:

EE2007.7(+) *1 SU2007.4(-) *2

EE2007.7(+) From EE2007.7(+) to EE2007.7(+) Execute configurator.exe on the version you want to enable.

From EE2007.7(+) to SU2007.4(-) 1. Execute configurator.exe on SU2007.4(-). 2. Reinstall SU2007.4(-).

SU2007.4(-)

From SU2007.4(-) to EE2007.7(+) Execute configurator.exe on EE2007.7(+).

From SU2007.4(-) to SU2007.4(-) 1. Execute DisableSmartUtilities.bat on the version you want to disable. 2. Execute configurator.exe on the version you want to enable. 3. Reinstall the version of Smart Utilities to be enabled.

Common property (centlib.prp) file Padstack library (padstackDB.psk) file located in the Layout folder Layout template and Panel template files Files in the CellDBLibs, IBISModels, PartDBLibs, and SymbolLibs subdirectories. Parts Manager database (partsmanager.mdb) file (DC/DV to Expedition flow only)

All other files in the central library should remain Everyone = Change (read-write) to ensure proper operation of the library. The Windows share that allows access to the central library directory from remote machines must have permissions set to Everyone = Full Control. The share permissions are superseded by the individual file permissions.

Can I configure xDM Library to support spaces in my Component Part Numbers and Cell catalog names in DMS Librarian and Librarian Flow Manager?

The default configuration of the xDM Library Data Model sets special character restrictions based on being able to support all Mentor Graphics products, but some special characters are supported in DMS Librarian and Librarian Flow Manager please refer to DMS Librarian User's Guide for more details.

Are there any issues with defining MGLS_LICENSE_FILE and LM_LICENSE_FILE?

Yes. Beginning with this release, the Configurator sets MGLS_LICENSE_FILE instead of LM_LICENSE_FILE to define the location of your licenses. If you already have defined LM_LICENSE_FILE to point to your licenses, this results in duplicate entries. Under some conditions, these duplicate entries may cause the tool to invoke more slowly. For more information on this issue and how to address it, see technote mg59067 (available on SupportNet).

Will .vfm forms continue to work in this release?

Beginning with the EXP2005.05 release, DxDesigner no longer supports the .vfm format for forms. However, forms in the .efm format are still supported. You should rewrite any existing .vfm forms, which were used in prior releases, to .efm format for use in this and subsequent releases of DxDesigner.

Is client/server setup available for the Windows platform?

Yes. The Server Setup for Client installs is used to install the software to a server-class system where multiple Windows client machines actually run the software across the network.

The System Administrator should install the desired applications onto the server and select the Server Setup for Client Installs > Client/Server Setup option at the same time. The Client/Server Setup option installs a file called ClientInstallSetup.exe onto the server during installation.

10

To set up the clients, map a network drive to the location on the server where the applications were installed and run ClientInstallSetup.bat in the dialog that displays. Enter the path to the location where the applications are installed on the server.

Supported Platforms Overall Notes

Specified patches below are minimum levels. Later versions of the patches are valid, supported configurations.

Except as noted, all products are supported on all platforms. Processor and memory requirements assume a single user for the system. Minimum

requirements are for use of a single product with small datasets in a desktop environment. Recommended requirements are for general usage with one or two Mentor applications and moderate size data sets. Users who use many applications simultaneously or who work with high-end designs will benefit from larger memory configurations. These requirements also do not attempt to quantify the impact of non-Mentor applications, system infrastructure requirements like virus scanners, network monitoring, etc. In general, more memory results in better performance.

For server configurations supporting multiple concurrent interactive users (via remote desktop or X Windows technologies), the memory requirements should be scaled by the number of concurrent users.

For server configurations running Mentor server-based products (e.g., xDM Server supporting xDM Design or xDM Library), the processor and memory requirements are contained in the planning guide for those specific products, and these requirements vary greatly depending on many aspects of the application and the number of users supported. Please consult the product-specific planning guides for these products when sizing these servers.

Processor Note for Intel/AMD Processors All Windows and Linux OS variants run on Intel or AMD x86 or x64 processors. In the past, the processor GHz speed determined the performance, but recent changes in the internal architecture of both Intel and AMD processors have made these comparisons difficult. Therefore, the following recommendations are being made for all Windows and Linux systems.

Supported processors and systems are those manufactured since 2008 which conform to the subsequent requirements.

Intel Celeron processors are not recommended. Minimum requirement is a dual-core (or dual processor) system. A quad core is

recommended for improved overall system performance. A hyperthreaded processor should be considered a single processor, not a dual processor.

For best results, maximize processor speed and L1/L2/L3 processor cache memory.

Typically, cost is the best indicator of performance, and extra investment in processor capability returns better system performance.

Red Hat Enterprise Linux WS 5 (RHEL5) This release supports both the 32-bit and 64-bit versions of RHEL5. Customers running AMD64-based systems or Intel Pentium4 or Xeon-based systems with EM64T capabilities should use 64-bit operating systems together with 32-bit applications support.

Note: The version numbers of the packages shown below as output of the uname or rpm command are for the RHEL Update noted in parentheses, and are included as examples of the output. For RHEL Updates supported but whose package versions are not shown below, the version information may vary, but the package is required, and must be the version that is delivered with that RHEL Update.

OS Version:

$ uname rs Linux 2.6.18-8.el5 (RHEL5 Base Version) or newer Required File Sets:

Select the following options on the Package Groups offered from install:

Desktop Environments: GNOME Desktop Environment

Applications Package Group: Graphical Internet

Development Package Group: Legacy Software Development, X Software Development

Base System: Base, X Window System, Legacy Software Support (add openmotif22 rpm)

Separately add the libXp rpm (libXp-1.0.0-8.i386.rpm in RHEL5 Base version) after selecting the above file sets.

Windowing System:

$ /bin/rpm -q gdm gdm-2.16.0 $ /bin/rpm -q -f /usr/bin/X Xorg-x11-server-Xorg-1.1.1

Configuration Verification: $ /bin/rpm q libXp libXp-1.0.0.8 $ /bin/rpm q compat-libstdc++-33 compat-libstdc++-33-3

12

$/bin/rpm q openmotif22 openmotif22-2

IT Administration Notes: Optionally disable firewall and SELinux (This option is needed for XtremePCB, and may be needed for other system-level administrative activities.)

1. Applications->SystemSettings-> Security Level

2. Firewall Options tab select Security Level: Disable firewall

3. SELinux tab uncheck Enabled (Modification Requires Reboot)

4. Reboot the system

Minimum Required OS Patches: None

Processor: Dual-core Intel or AMD processor minimum. See Processor Note for Intel/AMD Processors above.

Memory: 4 GB Minimum, 8 GB Recommended Swap Space: 2X the amount of RAM

Kernel Parameters: No changes required.

Red Hat Enterprise Linux WS 6 (RHEL6) This release supports both the 32-bit and 64-bit versions of RHEL6. Customers running AMD64-based systems or Intel Pentium4 or Xeon-based systems with EM64T capabilities should use 64-bit operating systems together with 32-bit applications support.

NOTE: Red Hat Enterprise Linux WS 6 (Update 6 and higher) is not supported in this release. The version numbers of the packages shown below as output of the uname or rpm command are for the RHEL Update noted in parentheses, and are included as examples of the output. For RHEL Updates supported but whose package versions are not shown below, the version information may vary, but the package is required, and must be the version that is delivered with that RHEL Update.

OS Version:

$ uname rs Linux 2.6.32-71 (RHEL6 Base Version) or newer

Recommended Installation: Select the following options on the Package Groups offered from the interactive install:

Install set - Software Development Workstation Package group selection Base System

o Base dos2unix unix2dos

o Compatibility libraries o Debugging Tools o Directory Client o Java Platform o Legacy UNIX compatibility

rsh rsh-server telnet telnet-server ksh

o Network file system client o Performance Tools o Perl Support o Printing client

Servers o CIFS file server o FTP server o NFS file server o Server Platform

Web Services o PHP Support o Web Server

Databases o (nothing)

System Management o SNMP Support

Virtualization o (nothing)

Desktops o Desktop o Desktop Debugging and Performance o Desktop Platform o Fonts o General Purpose Desktop o Graphical Administration Methods o Input Methods o KDE Desktop o Legacy X Window System compatibility

libXp openmotif openmotif22

o Remote Desktop Clients o X Window System

Applications

14

o Emacs o Internet Applications o Internet Browser o Office Suite and Productivity

Development o Additional Development

openmotif-devel o Desktop Platform Development o Development tools o Eclipse o Server Platform Development

Languages o (nothing)

The following package groups are required for a conformant RHEL6 installation. While not all applications require all packages, predictability and support of the installation is best when all of the following guidelines are followed. Package Groups:

These are the kickstart package groups used when installing RHEL6: # Package groups @additional-devel @base @basic-desktop @cifs-file-server @compat-libraries @debugging @desktop-debugging @desktop-platform @desktop-platform-devel @development @directory-client @eclipse @emacs @fonts @ftp-server @general-desktop @graphical-admin-tools @input-methods @internet-applications @internet-browser @java-platform @kde-desktop @legacy-unix @legacy-x @network-file-system-client @network-tools @nfs-file-server @office-suite @performance @perl-runtime @php @print-client @remote-desktop-clients

@server-platform @server-platform-devel @system-management-snmp @web-server @x11

These are the package groups as seen from an interactive installation:

Install set - Software Development Workstation Package group selection Base System

o Base dos2unix unix2dos

o Compatibility libraries o Debugging Tools o Directory Client o Java Platform o Legacy UNIX compatibility

rsh rsh-server telnet telnet-server ksh

o Network file system client o Performance Tools o Perl Support o Printing client

Servers o CIFS file server o FTP server o NFS file server o Server Platform

Web Services o PHP Support o Web Server

Databases o (nothing)

System Management o SNMP Support

Virtualization o (nothing)

Desktops o Desktop o Desktop Debugging and Performance o Desktop Platform o Fonts o General Purpose Desktop o Graphical Administration Methods o Input Methods o KDE Desktop o Legacy X Window System compatibility

libXp openmotif openmotif22

16

o Remote Desktop Clients o X Window System

Applications o Emacs o Internet Applications o Internet Browser o Office Suite and Productivity

Development o Additional Development

openmotif-devel o Desktop Platform Development o Development tools o Eclipse o Server Platform Development

Languages o (nothing)

Native File Sets: The following additional RPMs are required for this release. Note that these must be the 32-bit or 64-bit versions of these file sets, depending upon the platform. (If installed interactively, using the previously listed interactive package groups, most of these should already be installed.)

# Individual RPMs libXp openmotif openmotif22 ksh gdm-2 xorg-x11-server-Xorg xorg-x11-server-Xvfb (Must be downloaded from Red Hat directly.) dos2unix unix2dos

32/64-bit File Sets: The following additional file sets and rpms are required for this product. Note that both the 32-bit and 64-bit versions of these file sets must be installed (*.i686.rpm and *.x86_64.rpm), if the platform is 64-bit. In RHEL6, Red Hat no longer loads the 32-bit versions by default on a 64-bit machine. The package groups listed previously will install these RPM files on a 32-bit or a 64-bit machine. These are the additional 32-bit RPMs that must be installed on a 64-bit machine: (If installed interactively, using the previously listed interactive package groups, most of these should already be installed.)

#32-bit packages openmotif22.i686 libXext.i686 libX11.i686 libxcb.i686 libXau.i686 libXp.i686 libXtst.i686 libXi.i686 libdrm.i686 expat.i686 libselinux.i686 libtalloc.i686 libstdc++.i686 mesa-dri-drivers.i686 libXxf86vm.i686 libXfixes.i686 libXdamage.i686

mesa-libGL.i686 mesa-libGLU.i686 compat-libstdc++-33.i686 libICE.i686 libuuid.i686 libSM.i686 libXt.i686 libXmu.i686 ncurses-libs.i686 nspr.i686 libXrender.i686 freetype.i686 fontconfig.i686 libXft.i686 libXinerama.i686 gamin.i686 glib2.i686 zlib.i686 lib-png.i686 libtiff.i686 libjpeg.i686 compat-expat1.i686 libXrandr.i686 nss-util.i686 readline.i686 sqlite.i686 nss-softokn.i686 nss.i686 audit-libs.i686 cracklib.i686 db4.i686 pam.i686 redhat-lsb-core.i686 libXcomposite.i686 libXcursor.i686 atk.i686 pixman.i686 cairo.i686 dbus-libs.i686 avahi-libs.i686 libcom_err.i686 libgpg-error.i686 libgcrypt.i686 libtasn1.i686 gnutls.i686 keyutils-libs.i686 krb5-libs.i686 cups-libs.i686 jasper-libs.i686 libthai.i686 pango.i686 gtk2.i686 compat-libcap1.i686 libattr.i686 libcap.i686 libpng.i686 gtk2-engines.i686 libcanberra-gtk2.i686 PackageKit-gtk-module.i686 openssl098e-0.9.i686 compat-readline5.i686 compat-libtermcap.i686 libxslt.i686

18

compat-openldap.i686 libaio.i686 elfutils-libelf.i686 numactl.i686 libXdmcp.i686

IT Administration Notes: Optionally disable firewall and SELinux (This option is needed for XtremePCB, and may be needed for other system-level administrative activities.)

1. Applications->SystemSettings-> Security Level

2. Firewall Options tab select Security Level: Disable firewall

3. SELinux tab uncheck Enabled (Modification Requires Reboot)

4. Reboot the system

Minimum Required OS Patches: None




SuSE Linux Enterprise 11 (SLES 11) OS Version:

$ uname rs

Linux 2.6. 32 (SuSE Linux Enterprise Server 11 or later)

Linux 3.0. (SuSE Linux Enterprise Server 11 or later)

Windowing System:

$ /bin/rpm q gdm gdm-2.24

$ /bin/rpm q xorg-x11-server Xorg-x11-server-6.9 Xorg-x11-server-7.4 RPMs Required

Gnome Desktop Mgr RPM gdm-2.24 or higher X Windows RPM xorg-x11-server 32-bit Compat C++ Libraries (for 64-bit SLES11) RPM libstdc++33-32bit Compat C++ Libraries RPM libstdc__33-3 Open Motif RPM openmotif22 Libexpat0 Library RPM libexpat0 NOTE: The OpenMotif and libexpat0 RPMs are not delivered with SLES11, and must be separately downloaded from SUSE directly, or can be also be downloaded from opensuse.org. Individual files required These are provided by the above RPMs 32 bit libXm.so - /usr/lib/libXm.so 32 bit libexpat.so.0 - /usr/lib/libexpat.so.0

Minimum Required OS Patches: None Processor: Dual-core Intel or AMD processor minimum. See Processor Note for Intel/AMD Processors above.



Windows Server 2003 The following configurations are supported:

Microsoft Windows Server 2003, Standard Edition Service Pack 2 with all current updates via Windows Update, both 32-bit and 64-bit versions.

Microsoft Windows Server 2003, Enterprise Edition or Datacenter Edition have not been tested and therefore are unsupported.

Windows Server 2003 for Itanium-based Systems are not supported.


Minimum RAM: 4GB, 8GB recommended. (per simultaneously logged in user)

20

Swap space: 2X the amount of RAM

Microsoft Windows Vista (32 and 64 bit versions), Ultimate Edition, Business Edition, and Enterprise Edition

While there is no known issue with running Microsoft Windows Vista Home Basic Edition and Microsoft Windows Vista Home Premium Edition, the product has not been tested with these editions, and therefore is not supported.

Kernel Configuration: N/A


Memory: 4GB Minimum, 8GB recommended.

Swap Space: 2x the amount of RAM.

Microsoft Windows 7 Microsoft Windows 7 (32 and 64 bit versions), Professional Edition, Ultimate Edition, and Enterprise Edition are supported.

While there is no known issue with running Microsoft Windows 7 Starter Edition and Microsoft Windows 7 Home Premium Edition, the product has not been tested with these editions, and therefore is not supported.

Kernel Configuration: N/A


Memory: 4GB Minimum, 8GB recommended.

Swap Space: 2x the amount of RAM.


Microsoft Windows Server 2008, with all current updates via Windows Update, both 32-bit and 64-bit versions.

Microsoft Windows Server 2008 R2 (64-bit only) with all current updates via Windows Update

Windows Server 2008 for Itanium-based Systems are not supported.


Memory: 4GB Minimum, 8GB recommended. (per simultaneously logged in user)

Swap Space: 2X the amount of RAM


Microsoft Windows Server 2012, with all current updates via Windows Update

Microsoft Windows Server 2012 R2, with all current updates via Windows Update


Memory: 4 GB Minimum, 8 GB recommended. (per simultaneously logged in user)

Swap Space: 2X the amount of RAM

Component Management, Xpedition planning and placement Planning group management Physical circuit groups and manipulation, PCB planning and placement group manipulation Real Trace Plow: Auto-active PCB trace routing mode High-speed routing: High-speed PCB routing for tuning high-speed connections Dynamove, dynamic object movement Sketch RoutingIn the process of validating this release weve found that you can try the following steps when you notice performance problems in certain situations:LicensingSupported PlatformsOverall NotesProcessor Note for Intel/AMD Processors

Documents

EEVX.1_rhrter