Paper ID Surname Name Affiliation

17 Egizabal Pedro Fundfación TECNALIA

18 Lauke Bernd Leibniz Institut fuer Polymerforschung Dresden e

19 Robert Sekula ABB Corporate Research

24 Tsierkezos Nikos Technical University Ilmenau

25 Tomassetti Giordano IMAST scarl Technological District on Polymeric

26 Scheerer Michael Aerospace and Advanced Composites GmbH

28 Swolfs Yentl KULeuven

31 Scott James CAMBRIDGE UNIVERSITY

33 Pham Dinh Chi Institute of High Performance Computing, A*ST

39 Lin Leyu Mechanical and Process Engineering

40 Nakai Yoshikazu Kobe University

42 Boehm Robert TU Dresden

44 Rey Rodriguez Pilar AIMEN Technology Centre

50 Maille Laurence Laboratoire des Composites Thermostructuraux

51 RODRIGUEZ BELLIDOANA AIRBUS OPERATIONS, S.L.

55 Binte Mokhtar Hanan ISAT, Université de Bourgogne

59 SEVKAT ERCAN Meliksah UniversityMechanical Engineering

60 Kaynak Cevdet Middle East Technical University

61 COUPEAU Christophe Institut P'-University of Poitiers

64 Katunin Andrzej Silesian University of Technology

69 Taraiya Ajay GE India Technology Centre

71 Stier Bertram RWTH Aachen University

72 Wimmer Johannes RWTH Aachen University

76 Wang Qing Harbin Institute of Technology

78 Tsai Jia-Lin National Chiao Tung University

79 Hassinger Irene Institute for Composite Materials

82 Xu Xiaodong University of Bristol

83 Fliegener Sascha Fraunhofer Institute for Mechanics of Material

84 Matsuzaki Ryosuke Tokyo University of Science

101 Carole Rakotoariso Safran Snecma

104 Sennewald Cornelia TU Dresden

105 Lascoup Bertrand ESTACA

112 Fernberg Patrik Swerea SICOMP AB

115 Naito Kimiyoshi National Institute for Materials Science

117 GRIPPON EDITH LCTS

122 Christophe DUPIN LCTS

125 Dorigato Andrea University of Trento

126 Yokozeki Tomohiro University of Tokyo

132 Kano Ibarretxe Joana LEARTIKER-UNIVERSITY OF THE BASQUE COUNT

133 Matsuo Tsuyoshi The University of Tokyo

134 Koyanagi Jun Japan Aerospace Exploration Agency

136 Polyzois Dimos University of Manitoba

137 Matsutani Hiroaki Toray Industries, Inc.

140 Zhang Xin The University of Tokyo

141 Schmidt Frank TU Braunschweig

143 Kazanci Zafer Turkish Air Force Academy

144 GRIESSER Aurelia LCTS

145 Rohmer Eric Laboratoire des Composites Thermo Structuraux

147 Yamashita Shinichiro The Univercity of Tokyo

148 Jensen Alf Egil FiReCo AS

150 Fermeglia Maurizio University of Trieste

152 Boyer Francois Institut Clement Ader

155 Kose Kim Inpro GmbH

157 Silberschmidt Vadim Loughborough University

158 Roy Samit University of Alabama

163 Kong Changduk Chosun University

165 Selyugin Sergey AIRBUS

169 CHAPALAIN Flora Ifsttar

173 Amandine CELINO Institut de Recherche en Genie Civil et Mecani

174 Carlson Tony Swerea SICOMP AB

177 Nixon-Pearson Oliver University of Bristol

184 Pantano Antonio185 GALAN-MARIN CARMEN UNIVERSITY OF SEVILLE

196 julien jumel universite de bordeaux

198 Yamane Masachika The University of Tokyo

199 Yudhanto Arief Tokyo Metropolitan University

201 George Akhras Royal Military College of Canada

203 Wim VAN PAEPE Ghent University

205 Bovtun Viktor Institute of Physics ASCR

207 Carotenuto Gianfranco National Research Council

213 Thomason Jim University of Strathclyde

215 KIM HOJUNG Changwon national university

221 Cai Dongyu Loughborough University

228 Christmann Marcel Insitut für Verbundwerkstoffe GmbH

230 Oliveux Geraldine LTN/ICAM

236 Boehm Robert TU Dresden

237 Thieme Mike TU Dresden

239 Arif Abul Fazal King Fahd University of Petroleum & Minerals

243 Diaz Rodriguez Luis AntonioNanomaterials and Nanotechnology Research Ce

246 Sano Kentaro Toray industries, inc.

249 Crevel Jeremy Ecole des Mines d\'Albi Carmaux

250 Peter Hornsby Queen\'s University Belfast

255 Dereims Arnaud ESI Group / Ecole Nationale Superieure des Mine

256 Subhash Ghatu University of Florida

258 Christian Fagiano LMT-Cachan

259 Theotokoglou Efstathios National Technical University of Athens

261 Szpieg Magdalena Swerea SICOMP

264 Jacques Eric KTH Royal Institute of Technology

270 Camanho Pedro University of Porto

271 Audrey Coradi Laboratoire des Composites Thermostructuraux

272 Broughton William National Physical Laboratory

280 Roskowicz Marek Military University of Technology

282 Tan Kwek-Tze Purdue University

286 Sexton Anthony Australian National University

Università degli Studi di Palermo

288 Thorvaldsen Tom Norwegian Defence Research Establishment (FFI

290 De Amitabha Saha Institute of Nuclear Physics

291 De Baere Ives Ghent University

293 Serror Maéva Arts et Metiers Paris Tech / Nexans

294 Johnsen Bernt B. Norwegian Defence Research Establishment (FFI

295 Dong Yu Curtin university, UniversityMechanical Engine

300 Sejnoha Michal CTU in Prague, Faculty of Civil Engineering

303 Pegoretti Alessandro University of Trento

304 Tashkinov Mikhail State National Research Polytechnic University

307 Mindivan Harun Ataturk University

308 Dumas David Cenaero

311 Zucchelli Andrea University of Bologna

313 Acchar Wilson Federal University of Rio Grande do Norte

314 Kao Chih-chuan University of Strathclyde

317 Tsouvalis Nicholas National Technical University of Athens

320 Sipiczki Monika University of Szeged

321 Baranger Emmanuel LMT-Cachan

322 MARCO Yann ENSTA Bretagne

324 JEGOU Loïc IUT Saint-Brieuc

327 Yang Liu University of Strathclyde

332 HAYASHI TAKAHIRO MITSUBISHI RAYON CO,, LTD

334 Ecault Romain CNRS - Institut P'

335 Meatherall Stephen Composites Innovation Centre

336 Hirsekorn Martin Onera

338 Archer Edward University of Ulster

339 SARIFAH FAUZIAH SYED DRAM UNIVERSITI TEKNOLOGI MARA

344 Aniskevich Andrey Institute of Polymer Mechanics, University of La

356 INOUE Yuta Tokyo University of Science

363 Hakeem Abbas SaeedKing Fahd University of Petroleum and Minerals

368 Lee Hyunjung kOOKMIN uNIV,

369 Pasbakhsh Pooria Monash University Sunway Campus

374 Ogihara Shinji Tokyo University of Science

378 Emilie Trousset Onera - The French Aerospace Lab

379 Albouy William INSA Rouen - GPM

380 Azran Aymeric Laboratoire de Mécanique de l'Ingénieur de Cle

382 Grüber Bernd Technische Universitaet Dresden

384 Wucher Benoit Cenaero

385 TAKEDA Nobuo The University of Tokyo

389 Khastgir Dipak Indian Institute of Technology

390 Medeiros Araujo Thiago University of Trento

392 HADDAD Madjid IUT GMP Toulouse

393 Berro Ramirez Juan Pedro Institut P Prime

395 Worrall Chris TWI Ltd

397 Caton-Rose Fin University of Bradford

398 Santos Edval UFPE

402 Schumacher Shane Sandia National Laboratories

403 Sebaey Tamer UDG

407 Rans Calvin Carleton University

412 Harada Yoshihisa National Institute of Advanced Industrial Scienc

413 Gumula Teresa AGH University of Science and Technology

414 WALID HARIZI ECOLE DES MINES DE DOUAI

416 Modniks Janis University of Latvia

419 Laachachi Abdelghani CRP Henri Tudor

421 Gentles Fiona University of Strathclyde

424 Alexander Scott Sandia National Laboratories

425 Brocks Thatiane UNESP - Univ. Estadual Paulista

426 Watanabe Naoyuki Tokyo Metropolitan University

428 Nakatani Hayato Tokyo University of Science

429 Berg David Christ Clausthal UT

433 Grazyna Zietek Wroclaw University of Technology

439 Novo Paulo Polytechnic Institute of Leiria

441 Kandola Baljinder University of Bolton

443 Luangtriratana Piyanuch Institute of Meterials Research and Innovation

446 KASANO HIDEAKI Takushoku University

447 Kafi Abdullah Deakin University

450 Tanaka Yoshihisa National Institute for Materials Science

452 Chang Li University of Sydney

454 Sapozhnikov Sergei South Ural State University

455 Ye Lin The University of Sydney

457 Rao Sanjeev University of Auckland

459 Wang Qing Harbin Institute of Technology

465 Avanzini Andrea University of Brescia

467 Vidal-Salle EmmanuelleINSA Lyon

468 Bernasconi Andrea Politecnico di Milano

477 FEO Luciano University of Salerno

480 Cayzac Henri-Alexa Mines Paristech, Centre des Materiaux

484 NIMDUM Pongsak Centre des Matériaux, Ecole des Mines de Pari

487 De Vasconcellos Davi S. Institut PPRIME

491 Eiamnipon Naruepon Centre des Matériaux, Ecole des Mines de Paris

493 Lauter Christian of PaderbornAutomotive Lightweight Constructi

494 Bluemel Sven Laser Zentrum Hannover e.V.

495 Wippo Verena Laser Zentrum Hannover e.V.

502 Melemez Fazli Fatih Sabanci University

508 Yakushin Vladimir Latvian State Institute of Wood Chemistry

511 Bellmann Cornelia Leibniz Institut of Polymer Research Dresden

512 Tanaka Mototsugu Kanazawa Institute of Technology

515 Wendling Audrey INSA Lyon

517 Echevarria Luis Instituto de Ciencias de la Construcción Eduardo

518 HOSAKI Kosuke Graduate School, Kanazawa Institute of Technol

519 MOROMIZATO Toru Graduate School, Kanazawa Institute of Technol

520 ilczyszyn florent Université de technologie de troyes

521 Sklenicka Václav Institute of Physics of Materials AS CR,v.v.i.

525 Sharos Philip University of Limerick

526 Panella Prancesco Università del Salento

531 LISLE Teddy Institut Clément Ader (ICA)

535 Benedito Borrás Adolfo AIMPLAS

537 HARA Shuhei Graduate School, Kanazawa Institute of Technol

541 Lee Byoung-Sun Seoul National University

542 Hörold Andreas BAM Fed. Inst. for Materials Research and Testi

545 Richter Henning German Aerospace Center

546 Burgio Federica ENEA

547 Villalonga Stephane CEA

553 Sarfaraz Khabbaz Roohollah Ecole Polytechnique Federale de Lausanne (EPFL

554 Berardi Valentino University of Salerno

555 Van Ackeren Johan Vrije Universiteit Brussel (VUB)

557 Vassilopoulos Anastasios Ecole Polytechnique Federal de Lausanne

558 Long Andrew University of Nottingham

559 WESTPHAL Ophélie Ecole Centrale Nantes

564 Patamaprohm Baramee Centre des Matériaux, Ecole des Mines de Paris

565 VARGAS ROJAS Erik Universite de Franche-Comte

569 Rouhi MohammadChalmers University of Technology

571 Vaibhav Phadnis Loughborough UniversityWolfson School of MM

573 NI Lingli University of Haute Alsace

574 Nuno Loureiro University of Porto - Faculty of Engineering

575 Rezaei Ali Ghent University

576 bouvet christophe ISAE

577 Melro Antonio Rui IDMEC - Polo FEUP

578 Conroy Mark University College Dublin

580 Kalinski Dariusz Institute of Electronic Materials Technology

582 Baran Ismet Technical University of Denmark (DTU)

583 Bull Daniel Southampton University

589 Farines Ludovic Mahytec

593 Young Robert University of Manchester

594 Mortell Daniel University of Limerick

595 CHARALAMBOUS GEORGIA UNIVERSITY OF BRISTOL

596 Minervino Matteo ISAE ENSMA - Pprime - Poitiers

598 Fangueiro Raul Universidade do Minho

600 Carra Guglielmo Politecnico di Milano

601 Gigliotti Marco ENSMA - Institut Pprime - University of Poitiers

602 Müller Thomas Institute of Polymer Technology

603 Carvelli Valter Politecnico di Milano

604 Sanchez Serrano Javier FIDAMC

608 Maurice Julien Airbus Operations S.A.S

611 Lattimer Jessica North Dakota State University

612 Ulven Chad North Dakota State University

613 Dorr Kathrin MLU Halle

615 Pinto Roberto Federal University of Santa Catarina

616 Matveev Mikhail The University of Nottingham

618 Pierre-Olivier Renault University of Poitiers

619 Papantoniou Ioannis University of Patras

623 Mikkonen Kirsi University of Helsinki

628 Hine Peter Univeristy of Leeds

630 ZHANG Jing ECOLE CENTRALE PARIS

632 HONGKARNJANAKULNatthawat Institut Clement Ader

635 Maples Henry Imperial College London

637 Fuentes Carlos KULeuven

646 Kalaitzidou Kyriaki Georgia Institute of Technology

649 KUSANO Hideaki Shimadzu corporation

651 Milani Abbas University of British Columbia

655 Kim Seong Su Chonbuk National University

659 Wada Daichi The University of Tokyo

660 Nomura Yasutomo The University of Tokyo

661 Tomioka Tomoko The University of Tokyo

664 MIYAKE Takushi Gifu University

666 Davey Seb Australian National University

668 Kalyanasundaram Shankar The Australian National University

671 Oh Hyun-ju Chonbuk National University

675 Kang Tae-Hyung Seoul National University

680 Akhavan Zanjani Nima Australian National University

686 Threepopnatkul Poonsub Silpakorn University

687 Abraham Eldho CMS College, Kottayam

690 Sánchez Cebrián Alberto ETH Zürich

693 Laffan Matthew Jo Imperial College London

696 KOBARA Nozomi Graduate School, Kanazawa Institute of Technol

699 kanny Krishnan Durban University of Technology

705 Urena Alejandro Universidad Rey Juan Carlos

709 Quero Lopez Vinas EADS-CASA Airbus Military

711 Lukaszewicz Dirk BWM Group

713 Ivanov Dmitry University of Bristol

719 Horejsi Konstantin University of Leoben

720 Grieser Timo IVW GmbH

723 Fullriede Hendrik Leibniz Universitaet Hannover

724 Bedogni Enrico Università di Parma

725 Demircan Özgür Kyoto Institute of Technology

726 Moolkaew Wiriya Silpakorn University

727 Fauster Ewald Montanuniversitaet Leoben

729 CHEN Yu National University of Singapore

732 Stackler Matthieu Université de Technologie de Compiègne

735 Hildebrandt Klaus Institut für Verbundwrkstoffe GmbH

736 Coletti Marco TA Instruments - A division of Waters ltd

739 Glage Alexander TU Bergakademie Freiberg

744 Manes Andrea Politecnico di Milano

747 schipperen Ingrid tno

748 Hirano Yoshiyasu Japan Aerospace Exploration Agency

749 Pietrzak Katarzyna Institute of Electronic Materials technology

750 Tran Le Quan NgoKatholieke Universiteit Leuven

752 Hardiman Mark University of Limerick

757 MBACKE MAMADOU AMINES PARISTECH

758 Trabelsi Wassim Mines ParisTech

759 Lani Frédéric Université Catholique de Louvain

760 Rieber Gunnar Institut für Verbundwerkstoffe GmbH

761 Allen Robert University of Exeter

765 Chmielewski Marcin Institute of Electronic Materials Technology

766 ALLEMAND Alexandre CEA

769 Qian Cheng Knowledge Centre WMC

770 Moehle Enrico Technical University Braunschweig

772 SOHIER Laurent LBMS

775 COGNARD Jean Yves ENSTA Bretagne

777 Fabré Maarten Katholieke Universiteit Leuven

779 Trujillo Eduardo Universiteit Katholieke Leuven

785 Ward Ian University of Leeds

786 Lenz Franziska University of Bayreuth

794 OZDEN YENIGUN ELIF SABANCI UNIVERSITY

798 Schlimper Ralf Fraunhofer Institute for Mechanics of Material

799 Bouhala Lyazid CRP Henri Tudor

800 CAMPO MONICA UNIVERSITY REY JUAN CARLOS

801 Erceg Matko Faculty of Chemistry and Technology

804 Samoshina Marina National University of Science and Technology "

807 Narnhofer Matthias Montanuniversität Leoben

808 Georges Bertrand KAMGAING Mines-paristech (écoles des mines de Paris)

810 Munoz Raul Imdea Materials Institute

812 Chaudhari Raman Fraunhofer ICT

813 Young Robert University of Manchester

814 Grail Gaël ONERA

816 Grauers Lisa Swerea SICOMP

822 Cauda Valentina Italian Institute of Technology

823 Sanderson Andrew University of Surrey

824 Ghidini Massimo University of Cambridge and Parma

829 chang HONG University of Exeter

831 Weiland Frank EUROCOPTER

833 Justusson Brian University of Michigan

839 Yoshimura Akinori Japan Aerospace Exploration Agency

841 Kempf Manuel University of Bayreuth

843 Dickert Matthias Clausthal University of Technology

848 Toldy Andrea Budapest University of Technology and Economi

851 Sato Narumichi TORAY

856 Sheikh Md FadzullahSiti H Universiti of Liverpool

858 Tesinova Pavla Technical University of Liberec

860 Buffel Bart KULeuven - KHBO

864 Mohammad Mahdi Kheirikhah Islamic Azad University, Qazvin Branch

865 Scapin Martina Politecnico di Torino

867 Morton Hannah University of Southampton

869 HENRY Edwin Université catholique de Louvain

870 Fleckenstein Johanna Fraunhofer LBF

874 Drozdov Aleksey Danish Technological Institute

876 Peroni Lorenzo Politecnico di Torino

880 HERNANDEZ SILVIA Institute IMDEA Materials

885 Hartmann Marco AKTS AG

886 Mathur Neil University of Cambridge

887 Lecouvet Benoît University of Louvain

889 laik suzanne INSA Lyon

895 Yamamoto Go Tohoku University

896 Zubillaga Lierni IK4-Ikerlan

902 Cerny Ivo SVUM a.s.

905 Savina Irina University of Brighton

907 Wilmes Andre Imperial College London

911 Bens Jan Lessius Mechelen - Campus De Nayer

912 Ma Li Harbin Institute of Technology

914 Gary Seidel Virginia TechAerospace and Ocean Engineering

915 nadot-martin carole Pprime - ENSMA - University of Poitiers - UPR C

916 Freire Carmen Uiversity of Aveiro

921 Marotzke Christian BAM

922 Vo Hong Nhan Katholieke Universiteit Leuven

924 Krimmer Alexander EUROS GmbH

927 Hassan Azman Universiti Teknologi Malaysia

931 Mohan Ram North Carolina A&T State University

932 Czigany Tibor Budapest University of Technology and Economi

937 Trappe Volker BAM

939 TANAKA FUMIHIKO The University of Manchester

940 Erçin Gülsüm HilalInegi - University of Porto

941 Moya Xavier University of Cambridge

943 Arnold Ulrich Karlsruhe Institute of Technology (KIT)

944 Catapano Anita UPMC Paris 6 and CRP Henri Tudor

946 Gabr Mohamed Doshisha University

947 HALM Damien ENSMA

950 Bois Christophe Universite de Bordeaux

951 KINET Damien University of Mons

952 Vanaerschot Andy K.U.Leuven

953 Njuhovic Edin University of Bayreuth

954 ABOURA ZOHEIR University of Technology Of Compiegne

955 Paul Hanna Fraunhofer IWM

956 Karatzas Vassilios NTUA

959 Duchemin Benoit Le Havre University

960 LONG Mardy Laboratoire Génie Civil et Géo-Environnement (

962 Hornig Andreas TU Dresden

967 Russo Salvatore Alenia Aeronautica

968 Neumeyer Thomas University of Bayreuth

970 ELALDI FARUK University of BASKENT

973 Aretxabaleta Laurentzi Mondragon Goi Eskola Politeknikoa, JMA S. Coo

974 ARVIEU CORINNE Université Bordeaux1

976 Engström Jonas Swerea SICOMP AB

977 Phuong Thanh Vu Pisa University

978 KURASHIKI Tetsusei Osaka University

979 Airoldi Alessandro Politecnico di Milano

983 UYSAL Mehmet Sakarya University

984 Sket Federico IMDEA Materials Institute

986 Othman Ramzi Ecole Centrale de Nantes

990 Wu Chang-Mou FengChia University

993 Farmer Benjamin EADS UK Ltd

998 Sanchez Maria Rey Juan Carlos University

1000 El-Dessouky Hassan University of Leeds

1001 Verpoest Ignaas Katholieke Universiteit Leuven (KULeuven)

1005 Regel Franziska University of Minho

1006 Ghita Oana University of Exeter

1013 laurin frederic ONERA

1015 Marchisio Silvia Politecnico di Torino

1016 Mugica Joseba Mondragon University

1020 Szolnoki Beáta Budapest University of Technology and Economi

1021 Reine Bénédicte Institut Clément Ader

1023 Herreros miguel-angelETSIN (UPM)

1024 Avril Christophe MAHYTEC

1025 Gutkin Renaud Swerea SICOMP

1027 MAILLET Irène ISAE

1029 Merijs Meri Remo Riga Technical University

1030 Komeili Mojtaba University of British Columbia

1034 Cordenier François UCL

1039 Nassar Eduardo Universidade de Franca

1044 Geandier Guillaume Institut Jean L:amour

1048 Matveeva Anna University of Minho

1051 Psarras Spyridon Imperial College

1052 Enoksson Peter Chalmers University of Technology

1054 JOLIFF Yoann MAPIEM - ISITV

1061 Asp Leif Swerea SICOMP

1062 BELEC Lénaïk Labo MAPIEM

1063 LENZ E SILVA GUILHERME SAO PAULO UNIVERSITY

1069 Stassi Stefano Politecnico di Torino

1074 Alcock Mercedes Composites Innovation Centre

1076 Stocchi Cesare Imperial College London

1079 Steven Phillips McGill University

1081 Gonzalez Carlos UPM & IMDEA

1086 Yoshida Yukihiro Tokyo University of Science

1087 Lebrão Guilherme CEUN IMT / IPEN

1088 DE ALMEIDA Olivier Ecole des Mines d'Albi

1089 Patsidis Anastasios University of Patras

1092 Reilly Susan University of Strathclyde

1093 Pinho Silvestre Imperial College London

1094 Kotoul Michal Brno University of Technology

1097 Elmarakbi Ahmed University of Sunderland

1099 Lessard Larry McGill University

1102 Olsson Robin Swerea SICOMP AB

1112 ORGEAS Laurent CNRS / Università de GrenobleLaboratoire 3SR

1113 Breitzman Timothy US Air Force Research Laboratory

1115 Denev Yordan Prof. Asen Zlatarov University of Burgas

1120 Kelkar Ajit Joint School of Nanoscience and Naoengineerin

1122 Soleiman Fallah Arash Imperial College London

1124 Fragoudakis Roselita Tufts University

1125 Micallef Karl Imperial College London

1128 Struzziero Giacomo Cranfield University

1133 Sarasini Fabrizio Sapienza - Universitá di Roma

1136 Goto Kentaro The University of Tokyo

1137 George Andrew Swerea SICOMP

1141 Ankersen Jesper Imperial College London

1146 Harstad Eric Sandia National Laboratories

1147 Shamsuddin Siti Rosmina Imperial College London

1148 Koricho Ermias Politenico Di Torino

1150 Martorana Brunetto Centro Ricerca Fiat

1154 Pavese Matteo Politecnico di Torino

1155 Horita Masaomi Shinshu University

1157 Pillay Selvum UAB (University of Alabama at Birmingham)

1162 Hatsukade Yoshimi Toyohashi University of Technology

1163 Nakamura Rie Nihon University

1169 Bettini Paolo Politecnico di Milano

1173 Le Corre Steven Université de Nantes

1175 Nitta Yuji Yamaguchi University

1180 Harjkova Galina Riga Technical University

1181 Lee Koonyang Imperial College London

1183 Bismarck Alexander Imperial College London

1185 COLIN Xavier ARTS ET METIERS ParisTech

1188 Motochika Toshihiro kyoto institute of technology

1191 Pimenta Soraia Imperial College London

1194 nasir vahid tehranraymand consulting engineers company

1196 Ivanov Sergey KULeuven

1198 HIVET gilles University of Orleans

1200 BEN GOICHI College of Industrial Technology, Nihon Universi

1208 Schledjewski Ralf University of Leoben

1210 Suzuki Kazuya The University of Tokyo

1213 Nahvi Hassan Isfahan University of Technology

1215 CUTARD Thierry Mines Albi

1219 Dumont Pierre Grenoble INP

1223 Katok Kseniia University of Brighton

1225 Hallstrom Stefan Royal Institute of technology (KTH)

1227 Tahir Mohammad Royal Institute of Technology (KTH) Stockholm

1231 Rudeiros Fernandez Jose Luis University of Strathclyde

1237 Skordos Alex Cranfield University

1242 Bonefeld Dirk Bond-Laminates GmbH

1246 ADEKUNLE KAYODE MOUAU/ UNIVERSITY OF BORAS

1249 Salah KHALFALLAHUniversity

1252 Yokogawa Hideto Kyushu University

1256 monchiet vincent University of Paris-Est Marne la Vallée

1257 Jenkins Peter University of Strathclyde

1260 MATHIAS Jean-Denis IRSTEA

1265 SADASIVUNI KISHOR KUMUNIVERSITY OF SUD BRITTANY,LORIENT,FRANCE

1266 Lomov Stepan K.U.Leuven

1268 Hallander Per Saab

1273 Doostejtema Ali tehranraymand oil and gas company

1275 Volponi Ruggero CIRA Italian Aerospace Research Centre

1276 Zaldivar Rafael The Aerospace Corporation

1284 Michaud Véronique EPFL

1291 Ramamoorthy Sunil Kumar Högskolan I Borås

1292 BOURBIGOT Serge ENSCL

1300 JOANNES Sébastien Mines ParisTech

1302 Teixeira Rita Imperial College London

1303 Luyckx Geert Ghent University

1308 LIU Yong Nanjing University of Aeronautics and Astronaut

1313 Serna Moreno María del C University of Castilla-La Mancha

1316 Panciroli Riccardo Università di Bologna

1318 Brown Eric Los Alamos National Laboratory

1325 Uesu Yoshiaki Waseda University

1332 Duquesne Sophie Ecole Nationale Supérieure de Chimie de Lille

1339 Callens Michaël K.U.Leuven

1342 Byun Joon-Hyung Korea Institute of Materials Science

1343 Ersoy Nuri Bogazici University

1347 Jakobsen Johnny Aalborg University

1351 Hwang Hui Yun Andong National University

1353 Czeller Anna Budapest University of Technology and Economi

1358 PLACET Vincent FEMTO-ST

1363 Chakrabarti Anupam Indian Institute of Technology Roorkee

1365 Cinar Kenan Bogazici University

1366 Riccio Aniello Second University of naples

1369 LUBINEAU GILLES COHMAS/KAUST

1371 Sirtautas Justas University of Stuttgart

1372 Chiang Fu-pen Stony Brook University

1380 Marinucci Gerson Nuclear Research Institute

1392 Speck Thomas University of Freiburg

1395 Minak GiangiacomoAlma Mater Studiorum - Università di Bologna

1396 Arao Yoshihiko Doshisya University

1399 Lopresto Valentina University of Naples Federico II

1400 Starkova Olesja Institute of Polymer Mechanics, University of La

1401 Shchukin Dmitry MPI of Colloids and Interfaces

1410 Morelle Xavier Université Catholique de Louvain

1420 RAMIREZ FERNANDO UNIVERSIDAD DE LOS ANDES

1423 Fakirov Stoyko The University of Auckland

1427 GAO Xiguang Nanjing University of Aeronautics and Astronaut

1429 Haller Peer Technische Universität Dresden

1432 Büter Andreas Fraunhofer LBF

1434 Czel Gergely Advanced Composite Centre for Science and Innov

1439 Mannov Evgenij TUHH

1440 Atas Akin The University of Sheffield

1441 Bougherara Habiba Ryerson University

1443 Makradi Ahmed CRP Henri Tudor

1445 Gorbatikh Larissa Katholieke Universiteit Leuven (KU Leuven)

1446 LUTZ Vincent INSA LYON / CNRS

1447 Kosmann Nils TUHH

1449 Kalwak Gordon Rolls-Royce plc

1453 Liebig Wilfried Technische Universität Hamburg-Harburg

1455 Sob Mojmir Masaryk University

1467 Wang Wenxue Kyushu University

1470 Gurka Martin Institut für Verbundwerkstoffe GmbH

1473 Johnson W. Steven Georgia Tech

1474 Hamilton Andrew Aalborg University

1475 Shojaei Akbar Sharif University of Technology

1476 Hochard Christian LMA Marseille

1478 Boisse Philippe INSA Lyon

1480 LAMON Jacques CNRS

1481 Tola Maria del C Nanocyl S.A

1482 Chronopoulou Laura University of Rome La Sapienza

1483 Knoll Julia B. Technische Universität Hamburg-Harburg

1486 Dulieu-Barton Janice University of Southampton

1488 Kawai Masamichi University of Tsukuba

1492 Viets Christian Technische Universität Hamburg-Harburg

1497 Feissel Pierre UTC

1498 Mai Fang Queen Mary, University of London

1500 Chaeichian Sina Concordia University

1508 Schuck Marcus Jacob Plastics GmbH

1509 Meneghetti Giovanni University of Padova

1510 Mösenbacher Andreas Chair of Mechanical Engineering

1516 Shojaei Akbar Sharif University of Technology

1518 Thomsen Ole Thybo Aalborg University

1519 Foreman Joel University of Sheffield

1521 Mahdi Stephane Airbus Operations SAS

1523 Russo Pietro High Tech District on Polymeric and Composite M

1524 Pavia Fabio Brown University

1526 Olofsson Kurt Swerea SICOMP

1528 KLAPISZEWSKI LUKASZ POZNAN UNIVERSITY OF TECHNOLOGY

1530 Sorrentino Luigi National Research Council

1531 Kiefer Konstanze Imperial College London

1533 Valenza Antonino University of Palermo

1534 Aurilia Marco CYTEC EGINEERED MATERIALS

1535 gao shanglin Leibniz-Institut fur Polymerforschung Dresden e.

1537 Pham Chi Vinh Hanoi University of Science

1540 Schuett Martin Technische Universität Hamburg-Harburg

1541 Guemes Alfredo Univ Politecnica Madrid (UPM)

1542 Pirondi Alessandro1548 Gramegna Nicola EnginSoft SpA

1550 Longana Marco Luigi University of Southampton

1551 Ciappa Alessandra Delta Tech

1557 Schweizer Nicole Fraunhofer Institute for Structural Durability an

1559 Battams Gary University of Southampton

1561 Winkler Anja Technische Universität Dresden

1562 Jozsef Gabor Kovacs Budapest University of Technology and Economi

Università di Parma

1564 Ó Brádaigh Conchúr National University of Ireland, Galway

1572 Bangalore SridharanSugun CSIR - National Aerospace Laboratories

1576 Pantelelis Nikos NTUA

1578 Laustsen Steffen Aalborg University

1579 Boehler Patrick University of Stuttgart

1583 Correa Montoto Elena University of Seville

1586 Aubry Julien ICA

1587 Eman Jesper Swerea SICOMP AB

1590 Mannberg Peter Swerea SICOMP

1591 Popov Vladimir National University of Science and Technology "

1596 Downes Kerrie Ann University of Strathclyde

1598 Moroni Fabrizio University of Parma

1600 Solazzi Luigi Università di Brescia

1601 Butler Richard University of Bath

1602 Zhang Xiaohua Suzhou Institute of Nano-Tech and Nano-Bionics

1603 Barroso Alberto University of Seville

1604 Parkes Philip University of Bath

1605 Favela-Gallegos Carlos Adria The University of Sheffield

1607 Tábi Tamás Budapest University of Technology and Economi

1611 Lopresto Valentina University of Naples Federico II

1613 Toso-Pentecôte Nathalie German Aerospace Center (DLR)

1616 Tzeng Shinn-ShyonTatung University

1619 Dieringa Hajo Helmholtz-Zentrum Geesthacht

1622 Decker Julia Fraunhofer LBF

1623 Ivancevic Darko University of Zagreb, Faculty of Mechanical Eng

1626 AKBULUT HATEM SAKARYA UNIVERSITY

1633 Grundberg Staffan Umea University

1638 Grzesiak Dariusz West Pomeranian University of Technology

1644 Hassan Osama Umea university

1647 Chandrasekaran Swetha Technische Universitat Hamburg-Harburg

1650 Feng Dianshi University of Cagliari

1656 Torres Marques António FEUP

1657 Macanas Jorge Universitat Politècnica de Catalunya

1658 Feissel Pierre UTC

1659 Tavara Luis Universidad de Sevilla

1660 Teuscher Rémy EPFL

1663 Kjell Maria KTH Royal Institute of Technology

1665 Iannace Salvatore National Research Council of Italy

1669 KARA EMRE Hitit University

1671 Manfredi Diego IIT

1672 Robinson Paul Imperial College London

1676 Mecklenburg Matthias Hamburg University of Technology

1681 Canturri Carla Imperial College

1682 De Nicola Antonio Unisa

1684 Makowska Katarzyna Motor Transport Institute

1686 Colom Xavier Universitat Politècnica de Catalunya

1687 Fayazbakhsh Kazem McGill University

1688 Viktorova Irina Clemson University

1689 Richard Wool University of Delaware

1692 Tabashi Sara Islamic Azad Univ. Science and Research Branc

1699 Yousefi Nariman The Hong Kong University of Science and Techn

1702 Kim Yeong Korea Aerospace University

1709 Bulota Mindaugas Aalto University, School of Chemical Technology

1713 Yokota Hiroko Chiba University

1714 Montagnier olivier CReA (Centre de Recherche de l'Armée de l'air)

1719 Greenhalgh Emile Imperial College London

1722 Soutrenon Mathieu Ecole Polytechnique Fédérale de Lausanne

1723 Tavangari Abdoulnabi Hormozgan University

1729 Raimondo Lucio Imperial College London

1731 Rahaman Ariful KAUST

1734 Del Rosso Stefano Imperial College London

1739 Stein Jasmin The University of Manchester

1743 Stasiuk Galyna Karlsruhe Institute of Technology

1744 Grozdanov Anita Faculty of Technology and Metallurgy

1746 Sinchuk Yuriy Karlsruhe Institute of Technology

1751 WYSOKOWSKI MARCIN POZNAN UNIVERSITY OF TECHNOLOGY

1752 Thomsen Ole Thybo Aalborg University

1754 Balasubramaniam Kaveendran Harbin Institute of Technology

1755 PANOPOULOU AIKATERINI University of Patras

1759 Merah Necar King Fahd University of Petroleum &Minerals

1761 Gouzman Irina Soreq NRC

1763 Lian Wei Commercial Aircraft Corporation of China

1764 Ionita Mariana University Politehnica of Bucharest

1770 Phillips Scott The Pennsylvania State University

1772 Suga Kazuhiro Tokyo University of Science

1777 Shishkina Oksana Katholieke Universiteit Leuven

1780 MAROSI Gyorgy Budapest University of Technology and Economi

1782 Cwik Tomasz Imperial College London

1790 Alekseeva Sofya Institute of Machines Science of RAS

1791 Joki Reidar KvaleSINTEF

1796 Fernandez Villegas Irene Delft University of Technology

1797 Mittelstedt Siham Technische Universität Hamburg-Harburg

1798 BERTANI ROBERTA UNI PD

1799 Petrone Giuseppe University of Naples Federico II

1800 Both Jan Institute of Lightweight Structures

1801 APOSTOL Dragos AlexaUniversity POLITEHNICA of Bucharest

1802 Kiasat Mehdi SaeedAmirkabir University of Technology

1803 Broekhuis Ton University Groningen

1804 Akbulut Ahsen Sakarya University, Engineering Faculty

1807 Bhattacharyya Debes University of Auckland

1808 ISRAR AHMAD HARIS AHM Université de Toulouse-ISAE

1809 Kim Su-Hyeon Korea Institute of Materials Science

1812 Lekakou Constantina University of Surrey

1813 Vivolo Marianna KULeuven LRD

1817 Saleem MuhammadRyerson University

1821 Katogi Hideaki kanagawa university

1825 CHIACHIO-RUANO JUAN UNIVERSITY OF GRANADA

1832 Ding Yining Dalian University of Technology

1837 Gager Jakob Polymer Competence Center Leoben GmbH

1844 Zinno Alberto University of Napoli Federico II

1849 Povarova Kira A.A.Baikov Institute of Metallurgy and Matirials

1851 Bosia Federico Università di Torino

1856 Schedin Staffan Umea university

1861 Chard Jonathan University of Surrey

1862 Yu HaNa University of Bristol

1865 Cheung Karen Hoi YaUniversity of Cambridge

1867 Sasaki Gen Hiroshima University

1870 Soerensen Rene Aalborg University

1871 Kuwata Manabu Queen Mary, University of London

1872 Diao Hele Imperial College London

1873 Pereira Gilmar INEGI

1875 Kollar Laszlo Budapest University of Technology and Economi

1876 Eaton Mark Cardiff University

1879 Jimenez-Melendo Manuel Universidad de Sevilla

1880 Aravand Mohammadalkatholieke universiteit leuven (KUL)

1884 Bismarck Alexander Imperial College London

1887 Rutecka Agnieszka Institute of Fundamental Technological Research

1889 sellam Charline Queen Mary University of London

1893 ALP Ahmet Sakarya University

1896 Caminero Miguel AngeUniversity of Castilla-La Mancha

1898 Hodzic Alma The University of Sheffield

1900 ByungChul Kim University of Bristol

1906 Zhou Gang Loughborough University

1907 Karger-Kocsis Jozsef Budapest University of technology and Economi

1908 Wienrich Malte BAM Federal Institute for Materials Research an

1913 Schmutzler Henrik Technische Universität Hamburg-Harburg

1914 Lindgaard Esben Aalborg University

1915 Willgert Markus KTH Royal Institute of Technology

1916 Stefaniak Daniel DLR - German Aerospace Center

1923 Gvishi Raz Soreq

1924 Blázquez Antonio Escuela Superior de Ingenieros, University of Sev

1925 Crossley Richard University of Nottingham

1926 Paris Federico University of Seville

1928 Muc Aleksander Cracow University of Technology

1935 Mileiko Sergei Institute of Solid State Physics

1936 CELEBI EFE Gozde Fatm Sakarya University

1938 Joelly Ines Polymer Competence Center Leoben GmbH

1939 Lafferty Austin University of Sheffield

1940 Girhammar Ulf Arne Luleå University of Technology

1943 Cetinkaya Tugrul Sakarya University

1944 Nakai Asami Gifu University

1945 Cichosz Joerg Institute for Carbon Composites

1951 reveillon damien femto-st

1952 Grande Antonio Politecnico di Milano

1953 Sheikh Hamid University of Adelaide

1955 Howarth Jack University of Sheffield

1957 Potluri Prasad University of Manchester

1958 Karslioglu Ramazan Sakarya University

1959 GNIDAKOUONG NG Joel Renaud Ulsan National Institute of Science and Technol

1961 Vilatela Juan IMDEA

1963 Bak Brian Siemens Wind Power / Aalborg University

1965 Tomkova Blanka Technical University of Liberec

1967 Quatmann Michael RWTH Aachen University

1968 Cao Keqin University of Michigan

1972 de fazio piero enea-italian national agency for new technolog

1973 Boria Simonetta University of Camerino

1975 BALTOPOULOS ATHANASIOSUniversity of Patras / Applied Mechanics Labora

1976 Lekakou Constantina University of Surrey

1977 Tchoudakov Roza Technion - Israeli Institute of Technology, IIT

1978 Miranda Guedes Rui INEGI-Instituto de Engenharia Mecânica e Gestão

1980 Gibson Geoff Newcastle University - Centre for Composite Mat

1981 Bilotti Emiliano Queen Mary University of London

1982 Celebi Hande Anadolu University

1984 Pineda Castillo Ubaldo Cardenal Herrera University

1986 De Greef Niels Katholieke Universiteit Leuven (KUL)

1988 Peng Josh Z. University of Missouri-Kansas City

1991 Ohtani Akio Gifu University

2000 Rodriguez-Hortala Marta Vienna University of Technology

2006 Garcia Israel G. School of Engineering. University of Seville

2007 Palumbo Davide Politecnico di Bari

2008 Silva Leide Technological Faculty of Pindamonhangaba

2010 Galietti Umberto Politecnico di Bari

2012 Zaitsev Alexey Perm National Research Polytechnic University

2015 Mouzakis Dionysios Technological Educational Institute of Larisa

2023 Abdel-Magid Beckry Winona State University

2024 Trakakis George Institute of Chemical Engineering and High Tem

2026 Ma Jing Aalborg University

2027 Varna Janis Lulea University of Technology

2031 Allikas Georg Tallinn University of Technology

2037 Porras Alicia Universidad de los Andes

2042 Lund Erik Aalborg University

2043 Mantic Vladislav School of Engineering. University of Seville

2046 Tsoukleri Georgia FORTH/ ICE_HT - Un. of Patras

2047 Jones Frank University of Sheffield

2055 Cerny Miroslav Czech Technical University, Klokner Institute

2059 Holeczek Klaudiusz Technische Universitaet Dresden

2061 Bochynek Ralph Leichtbau-Zentrum Sachsen GmbH

2063 Cho Maenghyo Seoul National University

2065 Persson Maria University of Oulu

2068 Erdmann Eleonora ITBA

2072 Jacob Karl Georgia TEch

2073 Bai Su Imperial College London

2074 ARAI MASAHIRO Shinshu University

2084 Lee Woo Il Seoul National University

2089 Korach Chad Stony Brook University

2090 DAMIAN Celina MariaUniversity Politehnica of Bucharest

2093 Berglund Lars KTH

2095 Perillo Giovanni NTNU - Norwegian University of Science and Te

2097 Gibson Geoff Newcastle University

2098 Linden Johannes Newcastle University

2105 Tejchman Jacek Gdansk University of Technology

2106 DRISSI HABTI Monssef IFSTTAR

2110 Kupfer Robert Technische Universitaet Dresden

2114 BERGEROT Alain EADS Astrium-ST

2118 Ben Abdelwahed Amine Laboratoire Ondes et Milieux Complexes-CNRS

2121 Pitarresi Giuseppe University of Palermo

2125 Milano Giuseppe IMAST

2127 Valentini Manlio University of Rome Tor Vergata

2129 Dano Marie-LaureUniversite Laval

2138 SUSLER SEDAT ISTANBUL TECHNICAL UNIVERSITY

2139 Klepka Andrzej AGH University of Science and Technology

2143 Yang Zhihua Harbin Institute of Technology

2144 zhuo tian Harbin institute of technology

2147 Zhou Rui Harbin Institute of Technology

2156 Spagnoli Andrea University of Parma

2166 Sørensen Bent F. Technical University of Denmark

2169 Zhang Xuexi Harbin Institute of Technology

2170 CHALIORIS Constantin Democritus University of Thrace

2171 Ahmed Awais Delft University of Technology, Delft, The Nethe

2172 Grave Jon Harald L NTNU

2176 Qian Cheng University of Nottingham

2177 Dunlop John Max Planck Institute of Colloids and Interfaces

2178 Bond Ian University of Bristol

2179 Trask Richard University of Bristol

2183 Murin Justin Slovak University of Tecnnology

2186 Rabolt John University of Delaware

2188 Siochi Emilie NASA Langley Research Center

2189 Harrington Matthew Max Planck Institute of Colloids and Interfaces

2192 Cornwell Charles USACEITL

2198 Doherty Michael University of California Santa Barbara

2201 Blanco Norbert Universitat de Girona

2202 Galvanetto Ugo Università di Padova

2206 Leibler Ludwik ESPCI

2207 Arruda Ellen University of Michigan

2208 Fratzl Peter Max Planck Institute of Colloids and Interfaces

2209 Leach Kent University of California, Davis

2212 Shirshova Natasha Imperial College London - Chemical Engineering

2213 Wetzel Eric U.S. Army Research Laboratory

2214 Wetzel Eric U.S. Army Research Laboratory

2216 Geubelle Philippe University of Illinois

2217 Guelcher Scott Vanderbilt University

2221 Labordus Maarten Infra Composites BV

2222 QAZI Samiuallah INSA Lyon

2224 Jimsher Aneli Institute of Machine mechanics

2229 Schuett Matthias EADS Germany

2235 Morimune Seira Kobe University

2237 Sadeghinia Mahdi Delft University Of Technology

2239 Begley Matthew University of California, Santa Barbara

2246 Weinkamer Richard Max Planck Institute of Colloids and Interfaces

2251 Sottos Nancy University of Illinois

2256 Chee Siaw Soon Nanyang Polytechnic

2257 Twist Benjamin Swansea University / Airbus

2258 Aktas Alper University of Southampton

2261 van der Meer Frans Delft University of Technology

2266 OZAWA Yoshihito Fukushima University

2267 MONTEMURRO MARCO CRP HENRI TUDOR and UPMC Paris 6

2268 Bonora Nicola University of Cassino

2269 Zuccarello Bernardo university of Palermo

2271 Palardy Genevieve McGill University

2274 Ali Abdalla Chonbuk National University, Jeonju,, Republic

2275 Rana Sohel University of Monho, Portugal

2278 Pracella Mariano Ist. Materiali Compositi e Biomedici, IMCB-CNR

2283 Cunningham Paul Loughborough University

2286 Shimoda Masatoshi Toyota Technological Institute

2287 Seifoori Sajjad Tarbiat Modares University -Mechanical Enginee

2288 Rhee Sang-Hoon Seoul National University

2290 Duda Georg Charité - Universitätsmedizin Berlin

2295 Ahmad A M Mabrur Nanyang Technological University

2302 Chai Herzl Tel Aviv University

2303 Alston Sue Swansea University

2305 Jones Stephen University of Sheffield

2306 McMillan Alison University of Glamorgan

2310 Ye Yicong National university of defense technology

2311 Hoa Suong Concordia University

2313 Erdmann Eleonora ITBA

2314 Romão Cristina Faculty of Egineering of University of Porto

2316 Lungu Claudiu University of Alabama at Birmingham (UAB)

2317 Pearce Garth University of New South Wales

2319 Montesano John Ryerson University

2321 Zhang Faai Guilin University of Technology

2325 Martyniuk Karolina Risoe DTU

2329 AlSaidy Abdullah Sultan Qaboos University

2333 Knappe Stephan NETZSCH-Geraetebau GmbH

2336 Gruhl Andreas TU Dresden

2347 Arnold Cris Swansea University

2355 Zhang xuan Université de Technologie de Compiègne

2357 Raju GangadharaUnivesity of Bristol

2362 Moore Jeffrey University of Illinois

2374 Iannucci Lorenzo Imperial College

2376 White Scott University of Illinois

2383 Daud Norlinda RMIT University

2386 Mustapa Izan RoshawRMIT University,

2387 Frache Alberto Politecnico di Torino

2390 Le Moigne Nicolas CMGD - Ecole des Mines d'Alès

2391 Ben Ramdane Camélia Herakles (SAFRAN Group)

2395 Zhang Zhongyi University of Portsmouth

2398 Zangenberg Jens Technical University of Denmark

2399 Kakigi Hideyuki Osaka University

2401 Murayama Hideaki The University of Tokyo

2413 Reindl Andreas Fraunhofer IFAM

2417 Kaden Markus German Aerospace Center

2420 Gambarotta Luigi University of Genova

2426 Njuguna James Cranfield University

2427 Fina Alberto Politecnico di Torino

2429 Olszówka-Myalska Anita Silesian University of Technology

2433 Wilckens Dirk DLR

2434 Carrere Nicolas ENSTA-Bretagne

2437 Anzlovar Alojz National Institute of Chemistry

2439 Mallick Pankaj University of Michigan-Dearborn

2443 WARD CARWYN UNIVERSITY OF BRISTOL

2449 Greiner Andreas University of Marburg

2452 Zouari Wajdi Reims University, IUT de Troyes

2458 Buchely Mario Universidad de los Andes

2459 harrison philip university of glasgow

2463 Barber Asa Queen Mary University of London

2464 Zechner Johannes Austrian Academy of Sciences

2467 Kanarachos Stratis Frederick University

2470 Nobre João University of Coimbra

2472 Ortiz Christine Massachusetts Institute of Technology

2476 Lane J Matthew Sandia National Labs

2477 BARUAH Eju AIRBUS Operations GmbH

2479 Vignjevic Rade Cranfield University

2481 Zorica Siniša University Centre for Professional Studies

2483 ZAKRI Cécile Centre de recherche Paul Pascal

2484 Kwon Young US Naval Postgraduate School

2487 Massabo Roberta University of Genova

2493 Shukla Arun University of Rhode Island

2499 CAMINO Giovanni Politecnico di Torino Sede di Alessandria

2500 Camino Giovanni Politecnico di Torino Sede di Alessandria

2501 VIX-GUTERL Cathie CNRS - IS2M

2502 Frollini Elisabete University of Sao Paulo

2503 Bartolucci Nadia University of Bologna

2507 Brodowsky Hanna Leibniz-Institut für Polymerforschung Dresden e.

2509 Zein Samih LMS Samtech

2510 Koorevaar Arjen Polyworx BV

2513 Clegg Dennis University of Californa Santa Barbara

2516 Wolska Anna Warsaw University of Technology

2520 Tapinos Ilias National Technical University of Athens

2523 Boczkowska Anna Warsaw University of Technology

2531 Li Peifeng Nanyang Technological University

2533 Minghini Fabio University of Ferrara

2535 Tazelaar-Glattfeld Katrin Technical university of Delft

2536 Wachinger Georg EADS - Innovation Works

2538 CROUZEIX Laurent Institut Clément Ader

2539 Grunevald Yves-Henri Composites, Expertise & Solutions

2540 COLLOMBET Francis CLEMENT ADER INSTITUTE

2543 Zappalorto Michele University of Padova

2544 Salviato Marco University of Padova

2547 Quaresimin Marino University of Padova

2548 Carraro Paolo AndreUniversity of Padova

2549 Talreja Ramesh Texas A&M University

2550 Rajapakse Yapa Office of Naval Research

2551 De Monte Matthias Robert Bosch GmbH

2552 Vescovi Luca Dallara Automobili

2553 Manzi Stefania Università di Bologna - Fac. di Ingegneria

2554 Sankar Bhavani University of Florida

2569 Zallo Antonio Avio Spa

2571 Linari Mauro MSC Software

2574 Thalin Lennart DIAB International

2577 Kozlowski Marek Wroclaw University of Technology

2579 Dzenis Yuris University of Nebraska-Lincoln

2583 Furedi Milhofer Helga the Hebrew University of Jerusalem

Opening PresentationRemembering Daniela

Presentation Title Session Topic Session Day

DEVELOPMENT AND CHARACTT.S. Metal matrix compo Th2.12.1 Session Th2.12 Thursday 28thDoubly-curved interfaces foG.S. Interfaces and inte We1.13.1 Session We1.13 Wednesday 27thOPPORTUNITIES IN WASTE G.S. Processing and man We4.4.1 Session We4.4 Wednesday 27thSensors Based on Multi-WaG.S. Bio-based composit Mo3.14.1 Session Mo3.14 Monday 25thStructural particle swarm oT.S. Composite materials Tu3.8.4 Session Tu3.8 Tuesday 26thEffect of production induc T.S. Multiscale analysis We3.1.6 Session We3.1 Wednesday 27thA 3D finite element analysisT.S. Probabilistic appro Th1.6.1 Session Th1.6 Thursday 28thMultiferroic Composites T.S. Multiferroic-magne Tu3.6.1 Session Tu3.6 Tuesday 26thAn integrated approach forT.S. Fracture and Dama Th3.2.5 Session Th3.2 Thursday 28thProcessing Controlled Prop G.S. Nanocomposites: Pr We1.6.2 Session We1.6 Wednesday 27thEvaluation of Mode I and MG.S. Damage and fractu Th1.13.3 Session Th1.13 Thursday 28thIn-situ CT based damage chaT.S. Micro-CT applicatio Tu4.8.1 Session Tu4.8 Tuesday 26thInfluence of content and paT.S. Metal matrix compo Th2.12.2 Session Th2.12 Thursday 28thC/C composites obtained by G.S. Ceramic matrix: Pre We2.14.4 Session We2.14 Wednesday 27thIMPACT DAMAGE AND SHEART.S. Joining of composit We1.11.3 Session We1.11 Wednesday 27thComparison of Single and G.S. Damage and fractur Tu3.10.5 Session Tu3.10 Tuesday 26thTorsional Fatigue Behavio T.S. Fatigue of composit Tu3.7.6 Session Tu3.7 Tuesday 26thUSING MICRO- AND NANO-T.S. Daniela Tabuani - F Tu1.3.4 Session Tu1.3 Tuesday 26thUnderstanding the bucklin G.S. Mechanical and phy Th3.7.5 Session Th3.7 Thursday 28thInfluence of the self-heatin T.S. Fatigue of composit Tu1.7.1 Session Tu1.7 Tuesday 26thPolypropylene reinforced witT.S. Bio-based /natural Mo3.1.1 Session Mo3.1 Monday 25thSolid-shell concept applied G.S. Multiscale modelli Mo2.8.4 Session Mo2.8 Monday 25thApplying the solid-shell co G.S. Sandwich technolog Th3.10.1 Session Th3.10 Thursday 28thCOMPRESSIVE FAILURE OF T.S. Metal matrix compo Th2.12.3 Session Th2.12 Thursday 28thInvestigating local particle G.S. Damage and fractur Th4.13.5 Session Th4.13 Thursday 28thProduction of nanocompositeT.S. Advances in Nanoc Tu1.6.1 Session Tu1.6 Tuesday 26thAN EXPERIMENTAL AND NUMG.S. Damage and fractur Mo4.6.3 Session Mo4.6 Monday 25thMICROSTRUCTURE-BASED MG.S. Polymer matrix com We4.13.3 Session We4.13 Wednesday 27thControl of resin flow using T.S. Innovative Manufac We3.4.1 Session We3.4 Wednesday 27thDevelopment of a fatigue T.S. Fatigue of composit Tu1.7.2 Session Tu1.7 Tuesday 26thTextile based metal sandwicT.S. Metal matrix compo Th1.12.5 Session Th1.12 Thursday 28thDEFECT DETECTION BASED G.S. NDE technologies Mo4.4.1 Session Mo4.4 Monday 25thCarbon nanotube treated caG.S. Interfaces and inte We1.13.2 Session We1.13 Wednesday 27thThe effect of interlayer mo T.S. Delamination and i Mo2.2.1 Session Mo2.2 Monday 25thDamage characterization ofT.S. Multiscale analysis We1.1.3 Session We1.1 Wednesday 27thModelling the mechanical T.S. Multiscale analysis We2.1.3 Session We2.1 Wednesday 27thBiodegradable polyvinylalc T.S. Sustainable Compos Th1.8.1 Session Th1.8 Thursday 28thShear Thinning Behavior a G.S. Nanocomposites: M We3.9.3 Session We3.9 Wednesday 27thEffect of different silane c G.S. Interfaces and inte We1.13.3 Session We1.13 Wednesday 27thNew design approach for higT.S. Composites for aut Mo2.3.1 Session Mo2.3 Monday 25thPeriodic unit-cell simulatio G.S. Damage and fractur Tu2.10.3 Session Tu2.10 Tuesday 26thDevelopment of MeteorologG.S. Applications 2- Co Th3.8.1 Session Th3.8 Thursday 28thFlow Simulation of Long-fi T.S. Composites for aut Mo4.3.1 Session Mo4.3 Monday 25thStudy on Optimal CFRP AutT.S. Composites for aut Mo2.3.3 Session Mo2.3 Monday 25thEffects of defects on the m T.S. Manufacturing defec We1.9.1 Session We1.9 Wednesday 27thComparison of different typT.S. Composites under d Mo2.13.1 Session Mo2.13 Monday 25th

Presentation code

Enhanced SiC/SiC compositeG.S. Ceramic matrix: Pre We2.14.5 Session We2.14 Wednesday 27thMODELLING THE MECHANICAT.S. Multiscale analysis We2.1.6 Session We2.1 Wednesday 27thResearch on soft skin effec T.S. Composites for aut Mo2.3.4 Session Mo2.3 Monday 25thCreep measurements of steelT.S. Joining of composit We2.11.6 Session We2.11 Wednesday 27thNano tools for macro problT.S. Computer aided desi Tu1.1.1 Session Tu1.1 Tuesday 26thMECHANICAL AND ELECTRIG.S. Nanostructured fib Tu1.2.4 Session Tu1.2 Tuesday 26thOn the Problem of generatinT.S. Short fiber composi Mo3.11.2 Session Mo3.11 Monday 25thDynamic loading of fibre-reT.S. Composites under d Tu2.5.3 Session Tu2.5 Tuesday 26thA Concurrently Coupled MulT.S. Computer aided desi Tu1.1.5 Session Tu1.1 Tuesday 26thA Study on Structural DesigT.S. Composite materials Tu3.5.5 Session Tu3.5 Tuesday 26thON OPTIMIZATION OF COMPG.S. Optimization of la Mo3.4.1 Session Mo3.4 Monday 25thMICROINDENTATION BEHAVT.S. Multiscale modelli Tu4.1.1 Session Tu4.1 Tuesday 26thStudy of the diffusion behavT.S.Natural fibre and b Th1.1.1 Session Th1.1 Thursday 28thPlasma treatment- A route T.S. Composite material We3.12.3 Session We3.12 Wednesday 27thAn experimental investigat T.S. Fatigue of composit Tu1.7.3 Session Tu1.7 Tuesday 26thReinforcing effect of carb T.S. Mechanics of nano Tu3.1.4 Session Tu3.1 Tuesday 26thAbstract A combination of ST.S. Bio-based /natural Mo3.1.2 Session Mo3.1 Monday 25thInvestigation of cohesive f G.S. Damage and fractu Mo2.6.3 Session Mo2.6 Monday 25thPossibility of Repeated Rec T.S. Composites for aut Mo2.3.5 Session Mo2.3 Monday 25thDamage characterization inT.S. Mechanical behavio Tu2.13.3 Session Tu2.13 Tuesday 26th3D FINITE LAYER METHOD FOT.S. Thermal methods fo Th1.9.1 Session Th1.9 Thursday 28thLarge-scale blast loading ofT.S. Composites under d Mo2.13.2 Session Mo2.13 Monday 25thBroadband AC Conductivity T.S. CNT nanocomposite Tu2.2.1 Session Tu2.2 Tuesday 26thGRAPHITE NANOPLATELETSG.S. Nanocomposites: Pr We3.6.4 Session We3.6 Wednesday 27thNatural fibre cross sectionaT.S.Natural fibre and b Th2.1.5 Session Th2.1 Thursday 28thSYNTHESIS AND CHARACTERT.S. Advances in Nanoc Tu2.6.3 Session Tu2.6 Tuesday 26thToughening Polyethylene byG.S. Nanocomposites: Ap Th1.11.1 Session Th1.11 Thursday 28thInnovative Temperature DistT.S. Processing of ther We1.4.1 Session We1.4 Wednesday 27thRecycling the glass fibres G.S. Processing and man We4.4.2 Session We4.4 Wednesday 27thTextile based metal sandwicT.S. Mechanical behavio Tu2.13.2 Session Tu2.13 Tuesday 26thProbabilistic simulation for T.S. Probabilistic appro Th1.6.3 Session Th1.6 Thursday 28thEffect of Carbon Nanotube G.S. Multiscale modelli Tu4.1.3 Session Tu4.1 Tuesday 26thALUMINA-CERIA-TZP NANOG.S. Bio-based composit Mo3.14.2 Session Mo3.14 Monday 25thThe Development of Novel CT.S. Composites for aut Mo3.3.1 Session Mo3.3 Monday 25thExperiment and Modelling oG.S. Damage and fractur Mo3.6.3 Session Mo3.6 Monday 25thNano-cellulose Reinforced T.S. Bio-based /natural Mo3.1.3 Session Mo3.1 Monday 25thSimulation of Liquid Resin T.S. Liquid composite m Tu2.11.3 Session Tu2.11 Tuesday 26thComparison of Dynamic andT.S. Composites under d Mo2.13.3 Session Mo2.13 Monday 25thComputational Strategy fo T.S. Textile composites We2.7.1 Session We2.7 Wednesday 27thPREDICTION OF CRACK PR G.S. Damage and fractu Th1.13.6 Session Th1.13 Thursday 28thDevelopment and CharacteriG.S. Polymer matrix com We4.13.1 Session We4.13 Wednesday 27thEFFECT OF LITHIUM-ION I T.S. Composite material We2.12.1 Session We2.12 Wednesday 27thA 3D smeared crack to simuT.S. Micromechanics an Mo4.9.3 Session Mo4.9 Monday 25thA multiscale damage model T.S. Multiscale analysis We2.1.1 Session We2.1 Wednesday 27thOptical Techniques for MeaG.S. NDE technologies Mo4.4.5 Session Mo4.4 Monday 25thThe use of composite materiT.S. Composites repair We4.7.1 Session We4.7 Wednesday 27thValidation of Delamination T.S. Delamination and i Mo2.2.2 Session Mo2.2 Monday 25thExperimental and numerical T.S. Processing and Fab Tu3.11.1 Session Tu3.11 Tuesday 26th

A three-phase rule of mixtuT.S. Mechanics of nano Tu3.1.1 Session Tu3.1 Tuesday 26thConducting Polymer based G.S. Hybrid composites We3.10.3 Session We3.10 Wednesday 27thInfluence of specimen geomeT.S. Fatigue of composit Tu1.7.4 Session Tu1.7 Tuesday 26thPrediction of the cavitatio T.S. Durability of organ Tu2.4.1 Session Tu2.4 Tuesday 26thPreparation and characteri G.S. Nanocomposites: Pr We1.6.1 Session We1.6 Wednesday 27thElectrospun PLA/PCL/MPs NaT.S.Natural fibre and b Th3.1.5 Session Th3.1 Thursday 28thMesoscopis study of textileT.S. Multiscale analysis We1.1.4 Session We1.1 Wednesday 27thEpoxy nanocomposite adheG.S. Nanocomposites: Ap Th1.11.2 Session Th1.11 Thursday 28thHigh Order Multipoint ApprG.S. Multiscale modelli Mo2.8.2 Session Mo2.8 Monday 25thRECYCLING OF MG CHIPS G.S. Recycling We4.10.1 Session We4.10 Wednesday 27thNumerical prediction of the G.S. Health monitoring We4.14.3 Session We4.14 Wednesday 27thNANOFIBER INFLUENCE ON G.S. Experimental Techn We4.8.5 Session We4.8 Wednesday 27thMechanical Properties of A G.S. Ceramic matrix: Pre We1.14.5 Session We1.14 Wednesday 27thMechanical study on surfaceG.S. Fiber performaces Tu2.14.1 Session Tu2.14 Tuesday 26thExperimental parametric stuT.S. Joints in composite Mo2.7.5 Session Mo2.7 Monday 25thIndole-2-carboxylate- and dG.S. Nanocomposites: Pr We4.6.3 Session We4.6 Wednesday 27thModelling of the evolution oG.S. Ceramic matrix: Mo Th4.5.3 Session Th4.5 Thursday 28thHEAT BUILT-UP MEASUREMET.S. Short fiber composi Mo2.11.2 Session Mo2.11 Monday 25thTHERMOMECHANICAL IDENTIT.S. Short fiber composi Mo2.11.4 Session Mo2.11 Monday 25thThe Role Of Residual ThermaT.S. Thermal methods fo Th1.9.5 Session Th1.9 Thursday 28thFlexural behavior of CF/PP T.S. Composites for aut Mo3.3.2 Session Mo3.3 Monday 25thLASER DRIVEN SHOCK WAVG.S. Damage and fractu Mo2.6.4 Session Mo2.6 Monday 25thDevelopment and ImplementT.S. Biocomposites: syn We1.2.1 Session We1.2 Wednesday 27thMulti-scale and multi-physiG.S. Mechanical and phy Th1.7.1 Session Th1.7 Thursday 28thInternal strain measuremenT.S. Mechanical behavio Tu2.13.4 Session Tu2.13 Tuesday 26thSynthesis and characterizatT.S. Biocomposites: syn We1.2.2 Session We1.2 Wednesday 27thEXPERIMENTAL INVESTIGATG.S. Estimation of dura Th2.14.1 Session Th2.14 Thursday 28thThe effect of carbon nanotuT.S. CNT nanocomposite Tu2.2.2 Session Tu2.2 Tuesday 26thCarbon Nanotube Reinforc G.S. Nanocomposites: M We3.9.4 Session We3.9 Wednesday 27thHighly Conductive Organic-G.S. Hybrid composites We1.10.1 Session We1.10 Wednesday 27thSYNTHESIS AND CHARACTET.S. Biocomposites: syn We1.2.3 Session We1.2 Wednesday 27thEffect of Ply Thickness on G.S. Damage and fractur Mo3.6.1 Session Mo3.6 Monday 25thTowards the assessment of T.S. Composites under d Mo2.13.4 Session Mo2.13 Monday 25thInvestigations on the creepT.S. Environmental effe Tu4.4.1 Session Tu4.4 Tuesday 26thCharacterization of the lon G.S. Mechanical and phy Mo4.10.5 Session Mo4.10 Monday 25thAn analytical calculation m G.S. Design of composit Mo2.4.5 Session Mo2.4 Monday 25thAn example of mold compensT.S. Innovative Manufac We3.4.2 Session We3.4 Wednesday 27thQuality Evaluation of Adva T.S. Innovative Manufac We3.4.3 Session We3.4 Wednesday 27thPolymer-Ceramic Composites G.S. Polymer matrix com Mo2.14.5 Session Mo2.14 Monday 25thLiquid crystalline single-po T.S. Interfaces and Inte We3.13.1 Session We3.13 Wednesday 27thHIGH SPEED TRIMMING OFT.S. Manufacturing defec We2.9.2 Session We2.9 Wednesday 27thFracture simulation of wou G.S. Damage and fractur Tu2.10.1 Session Tu2.10 Tuesday 26thInduction Welding of ThermT.S. Joining of composit We2.11.1 Session We2.11 Wednesday 27thMeasurement and prediction T.S. Short fiber composi Mo2.11.5 Session Mo2.11 Monday 25thNanostructured ZnO-particleG.S. Nanocomposites: Pr We3.6.1 Session We3.6 Wednesday 27thAnisotropic Shock ResponseT.S. Shock compression Tu1.12.1 Session Tu1.12 Tuesday 26thIN-SITU STRENGTH MEASU T.S. Micromechanics an Mo2.9.1 Session Mo2.9 Monday 25thDamage tolerance analysis oT.S. Fatigue of composit Tu1.7.5 Session Tu1.7 Tuesday 26th

Environmental Effects on MeG.S. Polymer matrix com We4.13.4 Session We4.13 Wednesday 27thMechanical and electrical G.S. Ceramic matrix: Pre We2.14.2 Session We2.14 Wednesday 27thCHARACTERIZATION OF TH G.S. Health monitoring - We3.14.1 Session We3.14 Wednesday 27thApparent IFSS in misorienteT.S. Short fiber composi Mo3.11.3 Session Mo3.11 Monday 25thDevelopment of new approacG.S. Bio-based composit Th2.4.4 Session Th2.4 Thursday 28thInvestigation of interfacia G.S. Fibers and matrices Tu1.14.4 Session Tu1.14 Tuesday 26thDynamic Response of a CarbT.S. Shock compression Tu1.12.2 Session Tu1.12 Tuesday 26thEffects of interfacial adhe T.S. Delamination and i Mo2.2.3 Session Mo2.2 Monday 25thFormulation of 3-D HomogenT.S. Textile composites We2.7.2 Session We2.7 Wednesday 27thEvaluation of Notched Str G.S. Damage and fractur Mo3.6.2 Session Mo3.6 Monday 25thInfluence of shear on the Tu4.9.1 Session Tu4.9 Tuesday 26thHOMOGENIZATION AND IDENT.S. Multiscale analysis We2.1.2 Session We2.1 Wednesday 27thDevelopment of a new pultrT.S. Processing of ther We2.4.1 Session We2.4 Wednesday 27thMelt dripping and FlammabiT.S. Sustainable Compos Th1.8.2 Session Th1.8 Thursday 28thThermal insulation of fibre T.S. Daniela Tabuani - F Tu2.3.1 Session Tu2.3 Tuesday 26thBallistic Impact Behavior a T.S. Composites under d Tu2.5.4 Session Tu2.5 Tuesday 26thPreparation and PropertiesG.S. Nanocomposites: Pr We1.6.3 Session We1.6 Wednesday 27thMeasurement of thermal strG.S. Experimental Techn We4.8.1 Session We4.8 Wednesday 27thNew Insights into the Tribo T.S. Mechanics of nano Tu2.1.1 Session Tu2.1 Tuesday 26thStrength/stiffness quality c G.S. Applications 2- Co Th3.8.2 Session Th3.8 Thursday 28thInterlaminar fracture and T.S. Delamination and i Mo2.2.4 Session Mo2.2 Monday 25thSandwich Films with GrapheT.S. Advances in Nanoc Tu1.6.3 Session Tu1.6 Tuesday 26thSTUDY ON DIMENSIONAL STG.S. Durability and agei Th3.14.2 Session Th3.14 Thursday 28thEffect of micro-notch on th T.S. Short fiber composi Mo2.11.1 Session Mo2.11 Monday 25thHyperelastic constitutive mT.S. Mechanical behavio Tu3.13.2 Session Tu3.13 Tuesday 26thFibre orientation distribut T.S. Short fiber composi Mo4.11.5 Session Mo4.11 Monday 25thCharacterization of MechaniG.S. Applications 1 - Ma Th2.6.1 Session Th2.6 Thursday 28thExperimental investigation T.S. Multiscale analysis We3.1.3 Session We3.1 Wednesday 27thUse of acoustic emission toG.S. Health monitoring - We3.14.2 Session We3.14 Wednesday 27thCyclic fatigue behavior of G.S. Bio-based composit Th3.4.1 Session Th3.4 Thursday 28thLow velocity impact responT.S. Composites under d Mo3.13.1 Session Mo3.13 Monday 25thCrash tests of hybrid struc T.S. Composites for aut Tu2.8.6 Session Tu2.8 Tuesday 26thLaser machining of CFRP usiG.S. Processing and man We4.4.5 Session We4.4 Wednesday 27thThe influence of carbon fib T.S. Joining of composit We2.11.2 Session We2.11 Wednesday 27thDamage Detection in ComposG.S. Damage and fractu Th3.13.2 Session Th3.13 Thursday 28thEffect of the filler shape o G.S. Mechanical and phy Th1.7.4 Session Th1.7 Thursday 28thInvestigation of CompetitiveT.S. Sustainable Compos Th1.8.3 Session Th1.8 Thursday 28thTrial of Hybrid Interface C T.S. Organic-inorganic c Th4.1.2 Session Th4.1 Thursday 28thMesoscopic simulation of woT.S. Multiscale analysis We2.1.4 Session We2.1 Wednesday 27thActive reinforcement of cylG.S. FRP reinforced con Th3.9.1 Session Th3.9 Thursday 28thEffect of physical aging on O.N.R. session Mo3.5.4 Session Mo3.5 Monday 25thApplicability of Time-TempeO.N.R. session Mo3.5.5 Session Mo3.5 Monday 25thEffect of the fibre morphol T.S.Natural fibre and b Th3.1.4 Session Th3.1 Thursday 28thCreep behaviour and microsT.S. Metal matrix compo Th3.12.5 Session Th3.12 Thursday 28thAn analytical model to simuT.S. Joining of composit We1.11.5 Session We1.11 Wednesday 27thAbstract Title (write h T.S. Thermal methods fo Th2.9.2 Session Th2.9 Thursday 28thDAMAGE ASSESSMENT OF TG.S. Experimental Techni We2.8.1 Session We2.8 Wednesday 27thSelective Heating Applicati T.S. Processing of ther We1.4.3 Session We1.4 Wednesday 27th

T.S. 3D fiber preforming for composite structures

Effect of Water Absorption O.N.R. session Mo3.5.3 Session Mo3.5 Monday 25thManufacture of Si core/C shT.S. Advances in Nanoc Tu1.6.4 Session Tu1.6 Tuesday 26thStructural integrity in fire T.S. Daniela Tabuani - F Tu2.3.2 Session Tu2.3 Tuesday 26thHierarchic multi scale anal T.S. Multiscale analysis We3.1.5 Session We3.1 Wednesday 27thValidation of Py-C ChemicalG.S. Ceramic matrix: Mo Th4.5.2 Session Th4.5 Thursday 28thMechanical behaviour of 70G.S. Applications 2- Co Th3.8.5 Session Th3.8 Thursday 28thInfluence of the mean load eT.S. Fatigue of composit Tu2.7.1 Session Tu2.7 Tuesday 26thLocal buckling analysis of T.S. Composites in civil Tu2.9.2 Session Tu2.9 Tuesday 26thInfluence of strain rate on T.S. Shock compression Tu1.12.3 Session Tu1.12 Tuesday 26thMode I fatigue and fractur T.S. Joints in composite Mo3.7.1 Session Mo3.7 Monday 25thMULTI-SCALE STUDY OF RET.S. Innovative Manufac We3.4.4 Session We3.4 Wednesday 27thThermomechanical analysis T.S. Thermal methods fo Th1.9.2 Session Th1.9 Thursday 28thThree-dimensional analysis T.S. Probabilistic appro Th1.6.2 Session Th1.6 Thursday 28thDetermination of the roving T.S. Polymer composites We4.2.4 Session We4.2 Wednesday 27thCONSTITUTIVE MODELLINGG.S. Multiscale modellin Mo4.8.4 Session Mo4.8 Monday 25thUltrasonically assisted drill T.S. Composites under d Tu2.5.6 Session Tu2.5 Tuesday 26thPhotoinduced Synthesis and G.S. Hybrid composites We2.10.1 Session We2.10 Wednesday 27thDevelopment and characteriG.S. Mechanical and phy Th2.7.1 Session Th2.7 Thursday 28thUSING CAPACITORS IN PR G.S. Experimental Techni We2.8.2 Session We2.8 Wednesday 27thComparative study on the i T.S. Composites under d Mo3.13.2 Session Mo3.13 Monday 25thModelling the micromechaniT.S. Textile composites We2.7.3 Session We2.7 Wednesday 27thMODE-MIXITY IN BEAM-LIKG.S. Damage and fractu Th1.13.1 Session Th1.13 Thursday 28thMECHANICAL, THERMAL ANDG.S. Mechanical and phy Mo2.10.3 Session Mo2.10 Monday 25thPROBABILISTIC THERMO-C T.S. Probabilistic appro Th1.6.4 Session Th1.6 Thursday 28thMulti-scale 3D imaging of T.S. Micro-CT applicatio Tu4.8.2 Session Tu4.8 Tuesday 26thCompressed Hydrogen FormG.S. Applications 2- Co Tu4.11.3 Session Tu4.11 Tuesday 26thCarbon nanofibres producedT.S. Composites from R Tu1.13.1 Session Tu1.13 Tuesday 26thAn Investigation into the G.S. Testing and charact Th2.10.1 Session Th2.10 Thursday 28thTemperature Effects on FatT.S. Fatigue of composit Tu2.7.2 Session Tu2.7 Tuesday 26thIdentification of the therm T.S. Durability of organ Tu2.4.2 Session Tu2.4 Tuesday 26thPredicting Mechanical Beha Tu4.9.3 Session Tu4.9 Tuesday 26thTime dependent behaviour ofG.S. Applications 3 - C Th4.8.1 Session Th4.8 Thursday 28thLocal degradation and damaT.S. Durability of organ Tu2.4.3 Session Tu2.4 Tuesday 26thProcess combinations as a kT.S. Processing of ther We2.4.2 Session We2.4 Wednesday 27thA NON-CRIMP 3D ORTHOGOT.S. Mechanical behavio Tu2.13.5 Session Tu2.13 Tuesday 26thVARIATIONS IN THE FRAC G.S. Polymer matrix com We4.13.5 Session We4.13 Wednesday 27thAnalysis and modeling of thT.S. Joints in composite Mo3.7.2 Session Mo3.7 Monday 25thTORREFIED BIOMASS REIN T.S. Biocomposites: syn We1.2.4 Session We1.2 Wednesday 27thBAST NATURAL FIBER REI T.S. Biocomposites: syn We2.2.3 Session We2.2 Wednesday 27thStrain control of ferroic pr T.S. Multiferroic-magne Tu3.6.2 Session Tu3.6 Tuesday 26thStructural Behavior of Co T.S. Composites in civil Tu1.9.4 Session Tu1.9 Tuesday 26thMechanical properties of teT.S. Fracture and Dama Th3.2.2 Session Th3.2 Thursday 28thInvestigation of the mechanG.S. Experimental Techni We3.8.1 Session We3.8 Wednesday 27thFlexural Behavior of One-WT.S. Composites in civil Tu1.9.5 Session Tu1.9 Tuesday 26thMicrofibrillated cellulose T.S. Sustainable Compos Th1.8.4 Session Th1.8 Thursday 28thThe effect of fibre length o T.S. Short fiber composi Mo2.11.3 Session Mo2.11 Monday 25thINTERFACIAL STUDIES OF G.S. Interfaces and inte We1.13.4 Session We1.13 Wednesday 27thThe effect of stacking sequ G.S. Damage and fractur Tu3.10.1 Session Tu3.10 Tuesday 26th

T.S. 3D fiber preforming for composite structures

High Performance Carbon FiG.S. Interfaces and inte We1.13.5 Session We1.13 Wednesday 27thEffect of interfacial adhes T.S. Sustainable Compos Th1.8.5 Session Th1.8 Thursday 28thUnderstanding the propertyT.S. Graphene-based Po Th1.5.1 Session Th1.5 Thursday 28thThe experimental comparisoG.S. Experimental Techni We2.8.3 Session We2.8 Wednesday 27thSELECTION OF WOVEN FABRG.S. Applications 3 - C Th4.8.5 Session Th4.8 Thursday 28thNovel foaming methods to faT.S. Processing and Fab Tu3.11.2 Session Tu3.11 Tuesday 26thStrain distribution monitoriG.S. Experimental Techni We2.8.4 Session We2.8 Wednesday 27thBasic study on welding join T.S. Composites for aut Mo3.3.3 Session Mo3.3 Monday 25thBasic study on mechanicallyT.S. Composites for aut Mo3.3.4 Session Mo3.3 Monday 25thAbstract Title (write here) G.S. Damage and fractu Mo2.6.2 Session Mo2.6 Monday 25thInvestigation into the For T.S. Processing and Fab Tu3.11.3 Session Tu3.11 Tuesday 26thForming Analysis of ComposT.S. Processing and Fab Tu3.11.4 Session Tu3.11 Tuesday 26thThe effect of electrospun mT.S. Joints in composite Mo2.7.4 Session Mo2.7 Monday 25thShape Memory Polymer CompT.S. Polymer composites We4.2.3 Session We4.2 Wednesday 27thAn Investigation on the eff T.S. Processing and Fab Tu3.11.5 Session Tu3.11 Tuesday 26thSTUDY OF SURFACE TREATMT.S. Composites from R Tu1.13.2 Session Tu1.13 Tuesday 26thPreparation and characterizT.S. Sustainable Compos Th2.8.1 Session Th2.8 Thursday 28thMultistep heating to optimiT.S. Joining of composit We2.11.3 Session We2.11 Wednesday 27thAn experimental investigat G.S. Damage and fractu Th1.13.4 Session Th1.13 Thursday 28thTime and Temperature DepenO.N.R. session Mo3.5.6 Session Mo3.5 Monday 25thFATIGUE STUDIES OF UNTRT.S. Biocomposites: syn We1.2.5 Session We1.2 Wednesday 27thNanostructured epoxy adhesT.S. Joining of composit We3.11.4 Session We3.11 Wednesday 27thResearch activities on NanoG.S. Multifunctional co Th3.6.1 Session Th3.6 Thursday 28thExperimental Investigation T.S. Composites under d Mo2.13.5 Session Mo2.13 Monday 25thLocal compressibility of dr Tu3.9.3 Session Tu3.9 Tuesday 26thProcess selection optimizatT.S. Liquid composite m Tu1.11.3 Session Tu1.11 Tuesday 26thProduction of Continuously Tu3.9.5 Session Tu3.9 Tuesday 26thSilica nanoparticles with anG.S. Hybrid composites We2.10.2 Session We2.10 Wednesday 27thCREATING FINITE ELEMEN T.S. Mechanical behavio Tu4.13.1 Session Tu4.13 Tuesday 26thEffect of stitch and reinfo G.S. Processing and man We4.4.4 Session We4.4 Wednesday 27thPreparation of High Impact T.S. Daniela Tabuani - F Tu1.3.3 Session Tu1.3 Tuesday 26thA modular model-based proG.S. Processing and man Tu1.8.2 Session Tu1.8 Tuesday 26thNumerical Modeling of DamaG.S. Nanocomposites: M We4.9.5 Session We4.9 Wednesday 27thStudy and analysis of mixedG.S. Damage and fractu Th1.13.5 Session Th1.13 Thursday 28thDevelopment of a unit cell T.S. Processing of ther We1.4.4 Session We1.4 Wednesday 27thEvaluation of the barrier e G.S. Mechanical and phy Mo3.10.2 Session Mo3.10 Monday 25thLow cycle fatigue behavior T.S. Fatigue of composit Tu2.7.3 Session Tu2.7 Tuesday 26thStrain rate effects on Nom T.S. Shock compression Tu1.12.4 Session Tu1.12 Tuesday 26thValidation of a progressive T.S. Composites under d Mo3.13.3 Session Mo3.13 Monday 25thDamage behavior of CFRP lamT.S. Composite materials Tu4.5.1 Session Tu4.5 Tuesday 26thMICROSTRUCTURE AND MECHG.S. Mechanical and phy Mo2.10.4 Session Mo2.10 Monday 25thCOIR FIBRE COMPOSITES: T.S. Bio-based /natural Mo3.1.4 Session Mo3.1 Monday 25thExperimentation and NumeriG.S. Damage and fractu Mo2.6.5 Session Mo2.6 Monday 25thPredicting mechanical behavT.S. Multiscale analysis We3.1.2 Session We3.1 Wednesday 27thDurability of a 3D woven coT.S. Multiscale analysis We3.1.1 Session We3.1 Wednesday 27thNumerical study of the relaT.S. Fracture and Dama Th3.2.3 Session Th3.2 Thursday 28thInfluence of textile parame T.S. Liquid composite m Tu2.11.2 Session Tu2.11 Tuesday 26thWetting Mechanisms of VertT.S. Additive Manufactu Mo4.12.1 Session Mo4.12 Monday 25th

T.S. 3D fiber preforming for composite structures

T.S. 3D fiber preforming for composite structures

Effect of rhenium addition G.S. Mechanical and phy Mo2.10.5 Session Mo2.10 Monday 25thProtection against oxidatio T.S. Composites for aero We3.5.1 Session We3.5 Wednesday 27thFatigue simulations of multG.S. Multiscale modelli Mo3.8.2 Session Mo3.8 Monday 25thBehaviour of Impacted AsymG.S. Testing and charact Th1.10.4 Session Th1.10 Thursday 28thAnalysis of the mechanical T.S. Joints in composite Mo4.7.1 Session Mo4.7 Monday 25thAnalysis of the behaviour G.S. Testing and charact Th1.10.1 Session Th1.10 Thursday 28thHeating shape memory polymG.S. Applications 1 - Ma Th2.6.5 Session Th2.6 Thursday 28thWeibull statistics of bambooT.S.Natural fibre and b Th2.1.1 Session Th2.1 Thursday 28thDeveloping the next generaG.S. Polymer matrix com Tu4.12.2 Session Tu4.12 Tuesday 26thFabrication of Ceramic MatrG.S. Ceramic matrix: Pre We1.14.1 Session We1.14 Wednesday 27thTRACING THE SUPERIOR THG.S. Multiscale modelli Th3.5.3 Session Th3.5 Thursday 28thInfluence of mesoscopic fo G.S. Damage and fractur Th4.13.1 Session Th4.13 Thursday 28thDebonding in reinforced c T.S. Micromechanics an Mo4.9.4 Session Mo4.9 Monday 25thInterlaminar properties of G.S. Hybrid composites We3.10.4 Session We3.10 Wednesday 27thPreparation and characterizT.S. Composite material We1.12.5 Session We1.12 Wednesday 27thMechanically alloyed compT.S. Metal matrix compo Th2.12.5 Session Th2.12 Thursday 28thCFD Simulations of a hot gaT.S. Processing of ther We1.4.5 Session We1.4 Wednesday 27thAbstract Title (the predicti T.S. Delamination and i Mo2.2.5 Session Mo2.2 Monday 25thMechanical characterisatio T.S. Mechanical behavio Tu4.13.3 Session Tu4.13 Tuesday 26thCharacterization of High P T.S. Liquid composite m Tu2.11.4 Session Tu2.11 Tuesday 26thOptimization of the Reinf T.S. Graphene-based Po Th2.5.1 Session Th2.5 Thursday 28thMESO-SCALE MODELING OFT.S. Textile composites We2.7.4 Session We2.7 Wednesday 27thDeformation processes in G.S. Experimental Techn We4.8.2 Session We4.8 Wednesday 27thConfined polymeric nanowirG.S. Nanocomposites: Ap Th1.11.4 Session Th1.11 Thursday 28thMonitoring the disbonding G.S. Damage and fractu Th3.13.3 Session Th3.13 Thursday 28thThermal and electrical contT.S. Multiferroic-magne Tu3.6.3 Session Tu3.6 Tuesday 26thUltra rapid sintering and chG.S. Nanocomposites: Pr We4.6.5 Session We4.6 Wednesday 27thA simple model to predict tT.S. Liquid composite m Tu1.11.1 Session Tu1.11 Tuesday 26thHigh strain rate deformati T.S. Shock compression Tu1.12.5 Session Tu1.12 Tuesday 26th3D Simulation of High-Velo T.S. Composites under d Mo3.13.4 Session Mo3.13 Monday 25thAcoustic emission analysis G.S. Damage and fractu Th3.13.4 Session Th3.13 Thursday 28thInfluence of Binder on the G.S. Polymer matrix com Mo2.14.1 Session Mo2.14 Monday 25thDevelopment of MWCNT/carbG.S. Hybrid composites We2.10.3 Session We2.10 Wednesday 27thNovel test method for charaT.S. Delamination and i Mo3.2.1 Session Mo3.2 Monday 25thThe effect of angle of inci G.S. Damage and fractur Tu3.10.2 Session Tu3.10 Tuesday 26thCOMPUTED PROPERTIES OFG.S. Multiscale modelli Mo3.8.4 Session Mo3.8 Monday 25thElastic behaviour of cellula G.S. Multiscale modelli Mo2.8.3 Session Mo2.8 Monday 25thHigh Order Analytical and 3G.S. Sandwich technolog Th3.10.3 Session Th3.10 Thursday 28thInvestigation of the mecha G.S. Metal matrix compo Th4.12.1 Session Th4.12 Thursday 28thQuantification of Carbon F G.S. Damage and fractu Th3.13.5 Session Th3.13 Thursday 28thThermoplastic as carrier of G.S. Nanocomposites: Pr We1.6.4 Session We1.6 Wednesday 27thMean stress effect on the cT.S. Fatigue of composit Tu2.7.4 Session Tu2.7 Tuesday 26thCyclic viscoelasticity and v G.S. Nanocomposites: M We3.9.5 Session We3.9 Wednesday 27thHigh strain-rate mechanicalT.S. Shock compression Tu2.12.1 Session Tu2.12 Tuesday 26thAnalysis of curing cycle ef T.S. Manufacturing defec We1.9.2 Session We1.9 Wednesday 27thApplication of isoconversionG.S. Durability and agei Th3.14.1 Session Th3.14 Thursday 28thElectrically driven magneticT.S. Multiferroic-magne Tu3.6.4 Session Tu3.6 Tuesday 26thTHERMAL AND FIRE BEHAVT.S. Daniela Tabuani - F Tu1.3.2 Session Tu1.3 Tuesday 26th

Influence of residual stres G.S. Mechanical and phy Mo3.10.5 Session Mo3.10 Monday 25thMeasurements of Carbon NaT.S. CNT nanocomposite Tu2.2.3 Session Tu2.2 Tuesday 26thA failure criteria for free T.S. Delamination and i Mo3.2.2 Session Mo3.2 Monday 25thVerifying the potential of f G.S. Experimental Techni We2.8.5 Session We2.8 Wednesday 27thMacroporous highly permeabT.S. Composite materials Tu3.8.1 Session Tu3.8 Tuesday 26thA MOLECULAR DYNAMICS DT.S. Computer aided desi Tu1.1.2 Session Tu1.1 Tuesday 26thDevelopment of material- aG.S. Low cost technolog We4.11.1 Session We4.11 Wednesday 27thDesign and Fabrication of G.S. Mechanical and phy Th1.7.3 Session Th1.7 Thursday 28thComputational Multiscale MG.S. Multiscale modelli Tu3.1.6 Session Tu3.1 Tuesday 26thFATIGUE LIFE ASSESSMEN T.S. Short fiber composi Mo4.11.2 Session Mo4.11 Monday 25thNancocellulose fibers and T.S. Sustainable Compos Th2.8.4 Session Th2.8 Thursday 28thFailure of Composites undeT.S. Micromechanics an Mo3.9.5 Session Mo3.9 Monday 25thPreparation of biocompositeT.S.Natural fibre and b Th2.1.2 Session Th2.1 Thursday 28thAn approach for the explicitG.S. Mechanical and phy Th2.7.3 Session Th2.7 Thursday 28thTensile, Barrier and Biodeg G.S. Hybrid composites We2.10.4 Session We2.10 Wednesday 27thAtomistic Modeling in Poly G.S. Multiscale modellin Mo4.8.5 Session Mo4.8 Monday 25thA comparative analysis of hG.S. Fibers and matrices Tu1.14.3 Session Tu1.14 Tuesday 26thModelling the damage behaviT.S. Short fiber composi Mo3.11.5 Session Mo3.11 Monday 25thThe Effect of Nanostructur G.S. Fiber performaces Tu2.14.4 Session Tu2.14 Tuesday 26thSIZE EFFECTS ON THE TEN T.S. Composites for aero We3.5.2 Session We3.5 Wednesday 27thPhotoemission electron micrT.S. Multiferroic-magne Tu3.6.5 Session Tu3.6 Tuesday 26thManufacture of compositesT.S. Biocomposites: syn We2.2.1 Session We2.2 Wednesday 27thStrength optimisation of orG.S. Mechanical and phy Th3.7.1 Session Th3.7 Thursday 28thMechanical, thermal, and mG.S. Bio-based composit Mo3.14.4 Session Mo3.14 Monday 25thOne year OSIRHYS IV projectT.S. Composite material We4.12.1 Session We4.12 Wednesday 27thDesign of hybrid (bonded/faT.S. Joining of composit We2.11.4 Session We2.11 Wednesday 27thStructural health monitorinT.S. Structural Health M Tu3.14.1 Session Tu3.14 Tuesday 26thStatistical description of T.S. Mechanical behavio We1.7.3 Session We1.7 Wednesday 27thChemical surface treatment T.S. Composite material We3.12.5 Session We3.12 Wednesday 27thFinite elements modeling oT.S. Mechanical behavio Tu4.13.2 Session Tu4.13 Tuesday 26thEvaluation of the joining T.S. Joining of composit We3.11.5 Session We3.11 Wednesday 27thA parametric investigation oT.S. Joints in composite Mo3.7.3 Session Mo3.7 Monday 25thHybrid sustainable nanocompT.S. Sustainable Compos Th2.8.2 Session Th2.8 Thursday 28thDurability of CFRP-concret G.S. Hygrothermal durab Th1.14.1 Session Th1.14 Thursday 28thExperimental and numericalG.S. Testing and charact Th1.10.2 Session Th1.10 Thursday 28thThermoplastic concepts for T.S. Composites for aero We3.5.3 Session We3.5 Wednesday 27thFire behaviour and mechanicaT.S. Daniela Tabuani - F Tu2.3.4 Session Tu2.3 Tuesday 26thAN EXPERIMENTAL STUDY T.S. Composites repair We4.7.2 Session We4.7 Wednesday 27thDe-icing of carbon compositT.S. Composites for aero We3.5.4 Session We3.5 Wednesday 27thNUMERICAL SIMULATION OG.S. Metal matrix compo Th4.12.2 Session Th4.12 Thursday 28thCHARACTERIZATION OF CA G.S. Multifunctional co Th3.6.2 Session Th3.6 Thursday 28th“Green†Biocomposites � T.S.Natural fibre and b Th3.1.3 Session Th3.1 Thursday 28thEffects of Stitching Param T.S. Mechanical behavio Tu3.13.5 Session Tu3.13 Tuesday 26thA BI-PHASIC APPROACH T T.S. Fracture and Dama Th3.2.4 Session Th3.2 Thursday 28thWear Mechanisms of Bronze G.S. Metal matrix compo Th4.12.3 Session Th4.12 Thursday 28thDetailed damage mechanismT.S. Fracture and Dama Th4.2.1 Session Th4.2 Thursday 28thTesting the mechanical behaT.S. Composites under d Mo3.13.5 Session Mo3.13 Monday 25thGRAPHENE MODIFIED ELECT.S. Graphene-based Po Th1.5.5 Session Th1.5 Thursday 28th

Strategies to combine nanoT.S. Additive Manufactu Mo4.12.2 Session Mo4.12 Monday 25thSensors based on epoxy matrT.S. Structural Health M Tu3.14.2 Session Tu3.14 Tuesday 26thUltra-Light Weight ThermopT.S. Processing of ther We2.4.4 Session We2.4 Wednesday 27thInterlayer hybridization of G.S. Damage and fractur Mo4.6.4 Session Mo4.6 Monday 25thNumerical modelling approaT.S. Mechanical behavio We1.7.1 Session We1.7 Wednesday 27thAnalysis of recoated glass G.S. Fiber performaces Tu2.14.5 Session Tu2.14 Tuesday 26thA MULTISCALE HYBRID DA T.S. Fracture and Dama Th4.2.2 Session Th4.2 Thursday 28thCarbon nanotubes - reinforG.S. Metal matrix compo Th4.12.4 Session Th4.12 Thursday 28thImpact characterization andT.S. Composites under d Mo4.13.1 Session Mo4.13 Monday 25thComparison of additive and G.S. Multifunctional co Th3.6.3 Session Th3.6 Thursday 28thStudy of thermal behaviour G.S. Nanocomposites: Pr We4.6.2 Session We4.6 Wednesday 27thMaLECoN: a new fiber-metalT.S. Composites for win Mo4.5.1 Session Mo4.5 Monday 25thDevelopment of flax-reinfo T.S. Biocomposites: syn We3.2.4 Session We3.2 Wednesday 27thPredicting fibre kinking andG.S. Damage and fractur Tu1.10.1 Session Tu1.10 Tuesday 26thComparison between static T.S. Fatigue of composit Tu3.7.1 Session Tu3.7 Tuesday 26thStructure and properties ofT.S. Structure-property We4.5.4 Session We4.5 Wednesday 27thINVERSE IDENTIFICATION G.S. Testing and charact Th1.10.3 Session Th1.10 Thursday 28thAddition of a block copoly G.S. Nanocomposites: Pr We1.6.5 Session We1.6 Wednesday 27thPolyamide/Mesoporous SilicG.S. Hybrid composites We3.10.1 Session We3.10 Wednesday 27thStructural evolution of st T.S. Metal matrix compo Th2.12.4 Session Th2.12 Thursday 28thStructure-property relatio T.S. Structure-property We4.5.3 Session We4.5 Wednesday 27thInvestigating the damage-toG.S. Damage and fractur Th4.13.2 Session Th4.13 Thursday 28thNi/C/SiO2 nanostructured cG.S. Nanocomposites: Sy Th3.11.4 Session Th3.11 Thursday 28thWater diffusion in compositG.S. Hygrothermal durab Th1.14.2 Session Th1.14 Thursday 28thStructural battery materialsT.S. Composite material We1.12.1 Session We1.12 Wednesday 27thComparative effects betweeT.S. Effect of aggressi Tu3.4.5 Session Tu3.4 Tuesday 26thOxide-carbon refractories: G.S. Ceramic matrix: Mo Th4.5.1 Session Th4.5 Thursday 28thAn innovative copper-PDMS pG.S. Polymer matrix com Mo2.14.2 Session Mo2.14 Monday 25thHIGH RESOLUTION CHARACT.S. Biocomposites: syn We2.2.2 Session We2.2 Wednesday 27thUsing Strain Gauges to MoniT.S. Joints in composite Mo2.7.2 Session Mo2.7 Monday 25thEXPERIMENTAL INVESTIGATG.S. Bio-based composit Th1.4.1 Session Th1.4 Thursday 28thMicromechanical modellin ofG.S. Damage and fractur Tu2.10.5 Session Tu2.10 Tuesday 26thStatistical analysis of effe G.S. Testing and charact Th2.10.2 Session Th2.10 Thursday 28thMicrowave assist functionalG.S. Nanocomposites: Sy Th2.11.1 Session Th2.11 Thursday 28thInfluence of processing par G.S. Polymer matrix com Mo2.14.3 Session Mo2.14 Monday 25thDielectric, thermomechanicT.S. Polymer composites We4.2.2 Session We4.2 Wednesday 27thTHE EFFECT OF AGING ON G.S. Interfaces and inte We2.13.1 Session We2.13 Wednesday 27thStochastic Modelling of W T.S. Textile composites We2.7.6 Session We2.7 Wednesday 27thStudy of Crack Growth in MG.S. Ceramic matrix: Pre We2.14.3 Session We2.14 Wednesday 27thNumerical Analysis of dela T.S. Delamination and i Mo3.2.3 Session Mo3.2 Monday 25thMultiscale Finite Element T.S. Delamination and i Mo3.2.4 Session Mo3.2 Monday 25thTesting of carbon/epoxy NCG.S. Damage and fractu Th1.13.2 Session Th1.13 Thursday 28thMicrostructures and deformT.S. Micromechanics an Mo4.9.5 Session Mo4.9 Monday 25thDiscreet Damage Modeling G.S. Damage and fractur Tu2.10.2 Session Tu2.10 Tuesday 26thSTUDY ON A THERMOPLASTG.S. Polymer matrix com We4.13.2 Session We4.13 Wednesday 27thCOMPRESSION AFTER IMPAG.S. Mechanical and phy Mo3.10.6 Session Mo3.10 Monday 25thMesh-insensitive finite ele T.S. Shock compression Tu2.12.2 Session Tu2.12 Tuesday 26thUSING FAILURE THEORIES G.S. Damage and fractur Tu1.10.5 Session Tu1.10 Tuesday 26th

On constitutive modelling oT.S. Shock compression Tu2.12.3 Session Tu2.12 Tuesday 26thMulti-Objective optimisatioG.S. Processing and man Tu1.8.4 Session Tu1.8 Tuesday 26thTHERMAL AND MECHANICALT.S. Bio-based /natural Mo3.1.5 Session Mo3.1 Monday 25thPractical Design and EvaluaT.S. Composites for aut Mo3.3.5 Session Mo3.3 Monday 25thVoid characterization and G.S. Processing and man Tu1.8.5 Session Tu1.8 Tuesday 26thDynamic fracture in CFRP pG.S. Damage and fractur Th4.13.3 Session Th4.13 Thursday 28thModeling Layered CompositeT.S. Shock compression Tu2.12.4 Session Tu2.12 Tuesday 26thCarbon fibre reinforced PVDG.S. Polymer matrix com Mo2.14.4 Session Mo2.14 Monday 25thCrashworthiness analysis o T.S. Composites for aut Tu2.8.5 Session Tu2.8 Tuesday 26thAdhesive Joining TechnologiT.S. Composites for aut Mo3.3.6 Session Mo3.3 Monday 25thEfficient dispersion of car G.S. Nanocomposites: Pr We2.6.1 Session We2.6 Wednesday 27thMechanical properties of T G.S. Mechanical and phy Mo4.10.1 Session Mo4.10 Monday 25thProcessing and Characteriz T.S. Biocomposites: syn We2.2.4 Session We2.2 Wednesday 27thNondestructive Evaluation G.S. NDE technologies Mo4.4.2 Session Mo4.4 Monday 25thEffect of Yarn Structure o G.S. Bio-based composit Th1.4.2 Session Th1.4 Thursday 28thEmbedded Fibre Optic TechnG.S. Health monitoring We4.14.4 Session We4.14 Wednesday 27thA 3D image analysis method T.S. Micro-CT applicatio Tu4.8.3 Session Tu4.8 Tuesday 26thEffect of Alkali-Treatment T.S.Natural fibre and b Th1.1.2 Session Th1.1 Thursday 28thMECHANICAL PROPERTIES CT.S. Mechanical behavio We1.7.4 Session We1.7 Wednesday 27thBACTERIAL CELLULOSE AS G.S. Bio-based composit Th3.4.2 Session Th3.4 Thursday 28thNANO-FIBRILLATED CELLULG.S. Bio-based composit Mo4.1.1 Session Mo4.1 Monday 25thA non-empirical kinetic modT.S. Durability of organ Tu2.4.4 Session Tu2.4 Tuesday 26thDevelopment of Pultrusion G.S. Hybrid composites We1.10.5 Session We1.10 Wednesday 27thHierarchical scaling laws f T.S. Fracture and Dama Th1.2.1 Session Th1.2 Thursday 28thComparison between the CorT.S. Effect of aggressi Tu3.4.1 Session Tu3.4 Tuesday 26thMESO-FE MODELS OF TIGHT.S. Mechanical behavio Tu3.13.3 Session Tu3.13 Tuesday 26thConsistent geometrical modeT.S. Mechanical behavio Tu3.13.4 Session Tu3.13 Tuesday 26thOptimum Structural Design oG.S. Optimization of la Mo3.4.3 Session Mo3.4 Monday 25thComparison of permeabilityT.S. Liquid composite m Tu2.11.1 Session Tu2.11 Tuesday 26thJoint Efficiency of Ultrason T.S. Composites for aut Mo2.3.2 Session Mo2.3 Monday 25thPULL-IN INSTABILITY OF T.S. Advances in Nanoc Tu2.6.5 Session Tu2.6 Tuesday 26thFibre reinforced refractory G.S. Ceramic matrix: Pre We1.14.3 Session We1.14 Wednesday 27thX-ray microtomography and T.S.Natural fibre and b Th1.1.3 Session Th1.1 Thursday 28thSynthesis of Hydride Silicas G.S. Hybrid composites We1.10.2 Session We1.10 Wednesday 27th3D-textile reinforcement inT.S. Mechanical behavio Tu2.13.1 Session Tu2.13 Tuesday 26thINTERLAMINAR STRENGTH T.S. Mechanical behavio We1.7.2 Session We1.7 Wednesday 27thCharacterisation of the mecG.S. Bio-based composit Th1.4.5 Session Th1.4 Thursday 28thLightning strike performan T.S. CNT nanocomposite Tu2.2.4 Session Tu2.2 Tuesday 26thSpriForm: A hybrid techniquT.S. Processing of ther We2.4.3 Session We2.4 Wednesday 27thImpact and Flexural PropertT.S. Bio-based /natural Mo2.1.4 Session Mo2.1 Monday 25thAbstract Title (write here) T.S. Composites in civil Tu2.9.3 Session Tu2.9 Tuesday 26thMODE II DELAMINATION FAT.S. Delamination and i Mo3.2.5 Session Mo3.2 Monday 25thA polarization and FFT baseG.S. Multiscale modelli Mo3.8.1 Session Mo3.8 Monday 25thThe Effect of Thermal CondiG.S. Recycling We4.10.2 Session We4.10 Wednesday 27thMechanical behavior of sunG.S. Bio-based composit Th3.4.3 Session Th3.4 Thursday 28thAbstract Title (A ComparatiG.S. Nanocomposites: Sy Th3.11.3 Session Th3.11 Thursday 28thCompression behaviour of aT.S. Mechanics of nano Tu3.1.2 Session Tu3.1 Tuesday 26thInfluence of the forming pr Tu3.9.4 Session Tu3.9 Tuesday 26thT.S. 3D fiber preforming for composite structures

Effect of Matrix Type on F T.S. Environmental effe Tu4.4.2 Session Tu4.4 Tuesday 26thA comparative study on damG.S. Nanocomposites: M We4.9.1 Session We4.9 Wednesday 27thMECHANICAL AND CHEMICAT.S. Joining of composit We2.11.5 Session We2.11 Wednesday 27thUV-curable epoxy primer foT.S. Interfaces and Inte We3.13.2 Session We3.13 Wednesday 27thCan the outdoor properties T.S.Natural fibre and b Th3.1.2 Session Th3.1 Thursday 28thINTUMESCENCE AS METHODT.S. Daniela Tabuani - F Tu2.3.3 Session Tu2.3 Tuesday 26thContinuous fibre reinforcedT.S. Joining of composit We3.11.1 Session We3.11 Wednesday 27thTranslaminar Fracture ToughT.S. Fracture and Dama Th1.2.2 Session Th1.2 Thursday 28thTemperature insensitive curG.S. NDE technologies Mo4.4.3 Session Mo4.4 Monday 25thMechanical Properties and G.S. Ceramic matrix: Pre We1.14.4 Session We1.14 Wednesday 27thStress and strain states of T.S. Multiaxial fatigue We2.5.5 Session We2.5 Wednesday 27thEffect of the boundary condO.N.R. session Mo2.5.5 Session Mo2.5 Monday 25thShock Compression and StraT.S. Shock compression Tu3.12.1 Session Tu3.12 Tuesday 26thNew ferroelectric phases i T.S. Multiferroic-magne Tu4.6.1 Session Tu4.6 Tuesday 26thFlame Retardancy of Bio-B T.S. Daniela Tabuani - F Tu3.3.1 Session Tu3.3 Tuesday 26thTensile behaviour of ductil T.S. Fracture and Dama Th1.2.3 Session Th1.2 Thursday 28thPolydopamine Embedded ReT.S. Graphene-based Po Th2.5.4 Session Th2.5 Thursday 28thMicromechanical ProgressivT.S. Fracture and Dama Th1.2.4 Session Th1.2 Thursday 28thThermal Performance of a CT.S. Innovative Manufac We3.4.5 Session We3.4 Wednesday 27thAdhesion Characteristics ofG.S. Fibers and matrices Tu1.14.2 Session Tu1.14 Tuesday 26thEffect of healing agent-loa Complex materials for se Th1.3.1 Session Th1.3 Thursday 28thModeling the influence of eT.S.Natural fibre and b Th1.1.4 Session Th1.1 Thursday 28thC0 FE model for the analysiG.S. Sandwich technolog Th3.10.2 Session Th3.10 Thursday 28th3D PROCESS MODELLING F T.S. Manufacturing defec We2.9.4 Session We2.9 Wednesday 27thA Progressive Damage ApproT.S. Fatigue of composit Tu3.7.2 Session Tu3.7 Tuesday 26thModeling challenges in cycliG.S. Hygrothermal durab Th1.14.3 Session Th1.14 Thursday 28thMeso-modelling of biaxial n Tu4.9.2 Session Tu4.9 Tuesday 26thMECHANICAL PROPERTIES OO.N.R. session Mo3.5.1 Session Mo3.5 Monday 25thDetermination of isochronoG.S. Testing and charact Th2.10.3 Session Th2.10 Thursday 28thPlants as concept generatorComplex materials for se We1.3.4 Session We1.3 Wednesday 27thMechanical and impact charaT.S. Composites under d Mo4.13.2 Session Mo4.13 Monday 25thHybrid effects on mechanicG.S. Hybrid composites We3.10.2 Session We3.10 Wednesday 27thA global-local approach to T.S. Composites under d Mo4.13.3 Session Mo4.13 Monday 25thCreep behaviour of epoxy T.S. CNT nanocomposite Tu3.2.1 Session Tu3.2 Tuesday 26thNanocontainer-Based FeedbaComplex materials for se We1.3.5 Session We1.3 Wednesday 27thThe elasto-viscoplasticity T.S. Micromechanics an Mo2.9.2 Session Mo2.9 Monday 25thBAMBOO-GUADUA FIBERS G.S. Fiber performaces Tu2.14.3 Session Tu2.14 Tuesday 26thFrom Polymer Blends to NanG.S. Nanocomposites: Sy Th2.11.2 Session Th2.11 Thursday 28thNode Interpolation Cell MetT.S. Multiscale analysis We1.1.2 Session We1.1 Wednesday 27thNumerical and ExperimentalT.S. Sustainable Compos Th2.8.5 Session Th2.8 Thursday 28thMultiaxial Fatigue behaviouT.S. Short fiber composi Mo4.11.1 Session Mo4.11 Monday 25thDevelopment and characteriT.S. Fracture and Dama Th1.2.5 Session Th1.2 Thursday 28thINFLUENCE OF MOISTURE AT.S. Structural Health M Tu3.14.3 Session Tu3.14 Tuesday 26thStrength prediction of bolt T.S. Joints in composite Mo2.7.3 Session Mo2.7 Monday 25thUsing Infrared ThermographT.S. Fatigue of composit Tu3.7.3 Session Tu3.7 Tuesday 26thStudy of microstructure eff T.S. Probabilistic appro Th1.6.5 Session Th1.6 Thursday 28thOn localization of carbon n T.S. CNT nanocomposite Tu3.2.2 Session Tu3.2 Tuesday 26thCarbon multi-nanotubes fi G.S. Fiber performaces Tu2.14.2 Session Tu2.14 Tuesday 26th

T.S. 3D fiber preforming for composite structures

Influence of voids on the f G.S. Polymer matrix com Tu4.12.3 Session Tu4.12 Tuesday 26thEXPERIMENTAL ASSESSMENTT.S. Delamination and i Mo4.2.1 Session Mo4.2 Monday 25thInvestigation of the structuT.S. Manufacturing defec We1.9.3 Session We1.9 Wednesday 27thMechanical and magnetic pG.S. Mechanical and phy Mo4.10.3 Session Mo4.10 Monday 25thAbstract Title (New unidire T.S. Composites for aut Mo4.3.2 Session Mo4.3 Monday 25thSwitchable Fiber Reinforce G.S. Multifunctional co Th3.6.4 Session Th3.6 Thursday 28thOptimization of Joints in L T.S. Joining of composit We1.11.1 Session We1.11 Wednesday 27thMECHANICAL CHARACTERIZG.S. Experimental Techni We3.8.2 Session We3.8 Wednesday 27thCorrelation between Stres G.S. Nanocomposites: M We3.9.2 Session We3.9 Wednesday 27thfatigue of laminated composT.S. Fatigue of composit Tu3.7.4 Session Tu3.7 Tuesday 26thSimulation of the mechanicaT.S. Mechanical behavio Tu3.13.1 Session Tu3.13 Tuesday 26thINVESTIGATION OF SUBCRI G.S. Estimation of dura Th2.14.2 Session Th2.14 Thursday 28thFracture toughness of CarbT.S. CNT nanocomposite Tu3.2.3 Session Tu3.2 Tuesday 26thEnzyme immobilization on pG.S. Nanocomposites: Sy Th2.11.3 Session Th2.11 Thursday 28thOn the flexural failure mod G.S. Damage and fractur Tu1.10.2 Session Tu1.10 Tuesday 26thMEASURING VISCO-ELASTICG.S. Experimental Techni We1.8.1 Session We1.8 Wednesday 27thOff-axis notched fatigue beT.S. Fatigue of composit Tu3.7.5 Session Tu3.7 Tuesday 26thElectrical Resistance based G.S. Health monitoring We4.14.1 Session We4.14 Wednesday 27thIdentification of elastic pr G.S. Experimental Techn We4.8.3 Session We4.8 Wednesday 27thSELF-REINFORCED POLYLACT.S. Bio-based /natural Mo2.1.5 Session Mo2.1 Monday 25thSynthesis of thermoplastic/G.S. Nanocomposites: Sy Th3.11.5 Session Th3.11 Thursday 28thNEW PROCESSES FOR MASST.S. Innovative Manufac We3.4.6 Session We3.4 Wednesday 27thThe influence of reinforce T.S. Short fiber composi Mo3.11.4 Session Mo3.11 Monday 25thInvestigation of Concepts DT.S. Short fiber composi Mo4.11.4 Session Mo4.11 Monday 25thExperimental Study and TheT.S. Structure-property We4.5.1 Session We4.5 Wednesday 27thAssessment of Interlaminar/T.S. Fracture and Dama Th2.2.1 Session Th2.2 Thursday 28thPredicting the Material Pro G.S. Multiscale modelli Mo3.8.3 Session Mo3.8 Monday 25thAdvances in Industrial App T.S. Structural Perfor We1.5.3 Session We1.5 Wednesday 27thThermoplastic PolyUrethane T.S. Composites for aut Mo4.3.5 Session Mo4.3 Monday 25thOptimizing Strength and ToG.S. Ceramic matrix: Pre We1.14.2 Session We1.14 Wednesday 27thNew TailCast ManufacturinG.S. Low cost technolog We4.11.2 Session We4.11 Wednesday 27thModern composite materials T.S. Biocomposites: syn We2.2.5 Session We2.2 Wednesday 27thMonomatrix thermoplastic sT.S. Processing and Fab Tu4.11.2 Session Tu4.11 Tuesday 26thSIMULATION OF HIGH-CYCLT.S. Delamination and i Mo4.2.2 Session Mo4.2 Monday 25thMechanical behaviour of SPT.S. Joining of composit We3.11.2 Session We3.11 Wednesday 27thMWCNTs FOR TUNING VISCOT.S. CNT nanocomposite Tu3.2.4 Session Tu3.2 Tuesday 26thNanostructured Fibre SurfaG.S. Interfaces and inte Tu4.10.1 Session Tu4.10 Tuesday 26thExplicit secular equations a G.S. NDE technologies Mo4.4.4 Session Mo4.4 Monday 25thCompressive failure of CFRP G.S. Damage and fractur Tu1.10.3 Session Tu1.10 Tuesday 26thStructural testing and simulT.S. Structural Health M Tu3.14.4 Session Tu3.14 Tuesday 26thModelling delamination of TG.S. Hybrid composites We1.10.3 Session We1.10 Wednesday 27thModeling percolation in Ca T.S. Computer aided desi Tu1.1.3 Session Tu1.1 Tuesday 26thIdentification of constitut G.S. Experimental Techni We1.8.2 Session We1.8 Wednesday 27thSemi impregnated micro-saT.S. Composites for aut Mo4.3.3 Session Mo4.3 Monday 25thDevelopment of a CompositT.S. Composites for aut Tu2.8.4 Session Tu2.8 Tuesday 26thMethodology Development fT.S. Shock compression Tu3.12.3 Session Tu3.12 Tuesday 26thIntegration and evaluation oG.S. Multifunctional co Th4.6.3 Session Th4.6 Thursday 28thDevelopment of thermal coG.S. Hybrid composites We3.10.5 Session We3.10 Wednesday 27th

Manufacturing of Large Int T.S. Processing of ther We1.4.2 Session We1.4 Wednesday 27th3D weaving possibilities on Tu3.9.1 Session Tu3.9 Tuesday 26thIndustrial cure monitoring T.S. Liquid composite m Tu1.11.4 Session Tu1.11 Tuesday 26thAnalysis of grid-scored sandT.S. Composites for win Mo4.5.2 Session Mo4.5 Monday 25thINNOVATIVE JOINING OF A T.S. Joints in composite Mo4.7.3 Session Mo4.7 Monday 25thNUMERICAL AND EXPERIMENT.S. Micromechanics an Mo2.9.3 Session Mo2.9 Monday 25thPolymeric foams modelling bG.S. Multiscale modelli Mo2.8.1 Session Mo2.8 Monday 25thResidual stresses of cross-pG.S. Mechanical and phy Th2.7.4 Session Th2.7 Thursday 28thExperimental investigation G.S. Mechanical and phy Th2.7.5 Session Th2.7 Thursday 28thMetal Matrix Composites T.S. Advances in Nanoc Tu1.6.5 Session Tu1.6 Tuesday 26thThe absorption of automotivT.S. Effect of aggressi Tu3.4.4 Session Tu3.4 Tuesday 26thSimulation of 3D fatigue d T.S. Joining of composit We1.11.2 Session We1.11 Wednesday 27thFeasibility study of a lift G.S. Applications 2- Co Th3.8.4 Session Th3.8 Thursday 28thTHE EFFECT OF TOW GAPS T.S. Delamination and i Mo4.2.3 Session Mo4.2 Monday 25thMechanical Properties of C T.S. New Nanoscale and Mo2.12.3 Session Mo2.12 Monday 25thBiaxial testing of composit T.S. Micromechanics an Mo2.9.4 Session Mo2.9 Monday 25thGROWTH OF DAMAGE IN ADT.S. Additive Manufactu Mo4.12.3 Session Mo4.12 Monday 25thDamage evolution under benG.S. Damage and fractur Th2.13.1 Session Th2.13 Thursday 28thDevelopment of heat resis G.S. Bio-based composit Th1.4.4 Session Th1.4 Thursday 28thPenetration and indentationT.S. Composites under d Mo4.13.4 Session Mo4.13 Monday 25thExperimental study of damaT.S. Delamination and i Mo4.2.4 Session Mo4.2 Monday 25thPreparation and mechanicalG.S. Nanocomposites: M We4.9.3 Session We4.9 Wednesday 27thUltrasonic stirring as prod T.S. Metal matrix compo Th1.12.1 Session Th1.12 Thursday 28thInvestigations on the appli T.S. Short fiber composi Mo4.11.3 Session Mo4.11 Monday 25thMultiscale Damage AnalysisT.S. Multiscale analysis We3.1.4 Session We3.1 Wednesday 27thElectrochemical Energy St T.S. Composite material We4.12.2 Session We4.12 Wednesday 27thDynamics of axially loaded G.S. Mechanical and phy Th3.7.2 Session Th3.7 Thursday 28thMECHANICAL PROPERTIES OFG.S. Nanocomposites: M We4.9.2 Session We4.9 Wednesday 27thDynamics of partially inter G.S. Mechanical and phy Th3.7.3 Session Th3.7 Thursday 28thFracture toughness and theT.S. Graphene-based Po Th1.5.3 Session Th1.5 Thursday 28thSimulation of impact damagT.S. Composites under d Tu1.5.1 Session Tu1.5 Tuesday 26thDesign and Manufacture ofG.S. Processing and man Tu1.8.1 Session Tu1.8 Tuesday 26thUse of chicken feathers wasT.S. Composites from R Tu1.13.3 Session Tu1.13 Tuesday 26thStrain reconstruction from G.S. Experimental Techni We1.8.3 Session We1.8 Wednesday 27thStudy of transverse and delT.S. Micromechanics an Mo2.9.5 Session Mo2.9 Monday 25thCARBON FIBRE RECYCLING:G.S. Recycling We4.10.3 Session We4.10 Wednesday 27thPAN-based carbon fibers for T.S. Composite material We2.12.2 Session We2.12 Wednesday 27thMultifunctional lightweigh G.S. Bio-based composit Th3.4.5 Session Th3.4 Thursday 28thLow Velocity Impact ResponT.S. Composites under d Tu1.5.2 Session Tu1.5 Tuesday 26thRealization and characteriz T.S. Additive Manufactu Mo4.12.4 Session Mo4.12 Monday 25thDesign and evaluation of a G.S. Damage and fractu Mo2.6.1 Session Mo2.6 Monday 25thElectrical and mechanical pT.S. CNT nanocomposite Tu2.2.5 Session Tu2.2 Tuesday 26thDelamination Growth DirectT.S. Delamination and i Mo4.2.5 Session Mo4.2 Monday 25thAtomistic Simulations of In T.S. Computer aided desi Tu1.1.4 Session Tu1.1 Tuesday 26thAn influence of SiC contentT.S. Metal matrix compo Th1.12.2 Session Th1.12 Thursday 28thCOMPOSITES FROM KERATINT.S. Composites from R Tu1.13.4 Session Tu1.13 Tuesday 26thThe effect of gaps and overlT.S. Manufacturing defec We2.9.3 Session We2.9 Wednesday 27thOptimization Problems in NoG.S. Multiscale modelli Mo3.8.5 Session Mo3.8 Monday 25th

T.S. 3D fiber preforming for composite structures

BIOBASED POLYMERS AND G.S. Bio-based composit Th2.4.2 Session Th2.4 Thursday 28thViscoelastic Properties of G.S. Bio-based composit Th2.4.1 Session Th2.4 Thursday 28thProcessing and Properties T.S. Graphene-based Po Th1.5.4 Session Th1.5 Thursday 28thThermo-mechanical BehavioT.S. Composites for aut Mo4.3.4 Session Mo4.3 Monday 25thAcetylated TEMPO oxidized ceT.S. Bio-based /natural Mo2.1.1 Session Mo2.1 Monday 25thDesigned multiferroics: BaTT.S. Multiferroic-magne Tu4.6.2 Session Tu4.6 Tuesday 26thEffect of damage on the torT.S. Composite materials Tu3.5.1 Session Tu3.5 Tuesday 26thStructural Power CompositeT.S. Composite material We3.12.1 Session We3.12 Wednesday 27thShock absorption using encT.S. Shock compression Tu2.12.5 Session Tu2.12 Tuesday 26thAnalysis of elastic fields G.S. Damage and fractur Tu2.10.6 Session Tu2.10 Tuesday 26thSTRATEGIES FOR LOW, HI T.S. Composite Impact Tu1.4.1 Session Tu1.4 Tuesday 26thInfluence of Carbon Nanot G.S. Nanocomposites: Pr Mo4.6.5 Session Mo4.6 Monday 25thInvestigation of novel hybriT.S. Composite Impact Tu1.4.2 Session Tu1.4 Tuesday 26thThe Influence of PES and TrG.S. Damage and fractur Mo3.6.4 Session Mo3.6 Monday 25thCalculation of the Effective T.S. Multiscale analysis We1.1.5 Session We1.1 Wednesday 27thSurface treatment effects ofG.S. Bio-based composit Mo3.14.5 Session Mo3.14 Monday 25thINELASTIC DESIGN OF MET T.S. Micromechanics an Mo3.9.1 Session Mo3.9 Monday 25thSynthesis and characterisatT.S. Biocomposites: syn We3.2.1 Session We3.2 Wednesday 27thFatigue Failure of Sandwic T.S. Composites for win Mo4.5.3 Session Mo4.5 Monday 25thFabrication process of 3D G.S. Experimental Techn We4.8.4 Session We4.8 Wednesday 27thINTELLIGENT HEALTH MONG.S. Health monitoring - We3.14.4 Session We3.14 Wednesday 27thEffect of Sonication and Hi G.S. Mechanical and phy Mo2.10.1 Session Mo2.10 Monday 25thConductive CNT-Polyimide T.S. CNT nanocomposite Tu3.2.5 Session Tu3.2 Tuesday 26thA new strength simulation mG.S. Damage and fractur Th2.13.5 Session Th2.13 Thursday 28thA Molecular Modelling approT.S. Mechanics of nano Tu2.1.4 Session Tu2.1 Tuesday 26thShape Changing Plastics viaComplex materials for se We2.3.4 Session We2.3 Wednesday 27thNumerical study on identifiG.S. Experimental Techni We3.8.3 Session We3.8 Wednesday 27thMulti-level characterisatio T.S. Composites for win Mo4.5.4 Session Mo4.5 Monday 25thFire Retardancy of Biofibre T.S. Daniela Tabuani - F Tu3.3.5 Session Tu3.3 Tuesday 26thDynamic Testing of High P T.S. Composite Impact Tu1.4.3 Session Tu1.4 Tuesday 26thCREEP AND DURABILITY O G.S. Durability and agei Th3.14.4 Session Th3.14 Thursday 28thProgressive Damage Model G.S. Damage and fractur Th4.13.4 Session Th4.13 Thursday 28thPROCESSING WINDOWS FORT.S. Joining of composit We3.11.3 Session We3.11 Wednesday 27thMicromechanical analysis of T.S. Micromechanics an Mo3.9.2 Session Mo3.9 Monday 25thNew ETFE nanocomposites bG.S. Nanocomposites: Sy Th3.11.2 Session Th3.11 Thursday 28thTHE EFFECT OF CORE HEIG T.S.Natural fibre and b Th2.1.3 Session Th2.1 Thursday 28thSimulation and experimentalT.S. Joints in composite Mo4.7.4 Session Mo4.7 Monday 25thAbstract Title (write h G.S. Applications 3 - C Th4.8.2 Session Th4.8 Thursday 28thDynamic Response of CompoT.S. Composites under d Tu1.5.3 Session Tu1.5 Tuesday 26thAlternating polyketones as vComplex materials for se We2.3.3 Session We2.3 Wednesday 27thThe Effect of Different S T.S. Composite material We3.12.4 Session We3.12 Wednesday 27thNanocellulose-based polyanT.S. Advances in Nanoc Tu2.6.1 Session Tu2.6 Tuesday 26thExperimental Test to IdentiG.S. Damage and fractur Mo3.6.5 Session Mo3.6 Monday 25thHigh temperature formabilitT.S. Metal matrix compo Th3.12.1 Session Th3.12 Thursday 28thMeso-nano and micro-nano iT.S. Composite material We2.12.3 Session We2.12 Wednesday 27thEffects of core geometry onT.S.Natural fibre and b Th2.1.4 Session Th2.1 Thursday 28thEffect of drilling processe G.S. Damage and fractur Th2.13.2 Session Th2.13 Thursday 28thEffect of Matrix on Fatigue T.S. Fatigue of composit Tu2.7.5 Session Tu2.7 Tuesday 26th

Fatigue Diagnosis in CompoG.S. Damage and fractur Th2.13.4 Session Th2.13 Thursday 28thDIPHASIC CONDUCTIVE CONG.S. Health monitoring We4.14.2 Session We4.14 Wednesday 27thAssessing the operation loaT.S. Fracture and Dama Th2.2.2 Session Th2.2 Thursday 28thThermoplastic Composite strT.S. Composite materials Tu3.8.2 Session Tu3.8 Tuesday 26thOXIDE-REINFORCED COMPOT.S. Metal matrix compo Th1.12.3 Session Th1.12 Thursday 28thStrength improvement of fibT.S. New Nanoscale and Mo3.12.2 Session Mo3.12 Monday 25thExperimental analysis of c G.S. FRP reinforced con Th3.9.4 Session Th3.9 Thursday 28thCoupling Agent for Natural T.S. Bio-based /natural Mo2.1.2 Session Mo2.1 Monday 25thA NOVEL MANUFACTURING T.S. Short fiber composi Mo3.11.1 Session Mo3.11 Monday 25thCharacterization of PLA-SilkT.S.Natural fibre and b Th1.1.5 Session Th1.1 Thursday 28thFabrication Conditions of C T.S. Metal matrix compo Th3.12.2 Session Th3.12 Thursday 28thPly-based Optimization of G.S. Optimization of la Mo3.4.4 Session Mo3.4 Monday 25thMode-I interlaminar toughnT.S. Delamination and i Tu4.7.1 Session Tu4.7 Tuesday 26thPseudo-ductile behaviour ofG.S. Hybrid composites We3.10.6 Session We3.10 Wednesday 27thStudy and Calibration of FBG.S. Health monitoring - We3.14.5 Session We3.14 Wednesday 27thNew Composite Beam TheoryG.S. Design of composit Mo2.4.4 Session Mo2.4 Monday 25thStructural Health Monitori T.S. Structural Health M Tu3.14.5 Session Tu3.14 Tuesday 26thMicrostructure and mechaniG.S. Mechanical and phy Th1.7.5 Session Th1.7 Thursday 28thEvolution of carbon nano-t T.S. CNT nanocomposite Tu4.2.1 Session Tu4.2 Tuesday 26thCARBON FIBRE MODIFICAT T.S. Composite material We2.12.4 Session We2.12 Wednesday 27thDamage analysis of Al(Mg)/G.S. Damage and fractur Th2.13.3 Session Th2.13 Thursday 28thSPRAYING LAYER-BY-LAYERT.S. Graphene-based Po Th2.5.2 Session Th2.5 Thursday 28thEffect of Reciprocating Sl T.S. Metal matrix compo Th3.12.3 Session Th3.12 Thursday 28thDIGITAL IMAGE CORRELAT G.S. Experimental Techni We1.8.4 Session We1.8 Wednesday 27thTHE INVESTIGATION OF MEG.S. Mechanical and phy Mo3.10.4 Session Mo3.10 Monday 25thMulti-tow shearing mechaniG.S. Applications 3 - C Th4.8.3 Session Th4.8 Thursday 28thInvestigation of interlamin G.S. Damage and fractur Mo4.6.1 Session Mo4.6 Monday 25thOn the Toughness of PolymeT.S. New Nanoscale and Mo3.12.4 Session Mo3.12 Monday 25thImpact of ionic liquid on t T.S. Composite material We1.12.4 Session We1.12 Wednesday 27thInfluence of loading case o T.S. Thermal methods fo Th2.9.1 Session Th2.9 Thursday 28thA novel rational design metG.S. Optimization of la Mo3.4.2 Session Mo3.4 Monday 25thNEW APPROACHES FOR SOLT.S. Composite material We1.12.3 Session We1.12 Wednesday 27thImproving the mechanical pG.S. Hybrid composites We1.10.4 Session We1.10 Wednesday 27thMORPHOLOGICAL CHANGES G.S. Hybrid composites We2.10.5 Session We2.10 Wednesday 27thAnalysis of a stringer run-o T.S. Structural Perfor We1.5.5 Session We1.5 Wednesday 27thThe Development and ProcessT.S. Bio-based /natural Mo2.1.3 Session Mo2.1 Monday 25thOn the use of three dimensioT.S. Structural Perfor We1.5.4 Session We1.5 Wednesday 27thIdentification of Defects i T.S. Mechanics of nano Tu2.1.5 Session Tu2.1 Tuesday 26thCreep behavior of metal matT.S. Metal matrix compo Th1.12.4 Session Th1.12 Thursday 28thIMPROVING PROPERTIES OF G.S. Mechanical and phy Mo4.10.4 Session Mo4.10 Monday 25thStudy of mechanical and phyT.S. Composites repair We4.7.3 Session We4.7 Wednesday 27thDispersion and Mechanical/G.S. Nanocomposites: Pr We2.6.3 Session We2.6 Wednesday 27thHuman-induced vibrations iG.S. Mechanical and phy Mo3.10.3 Session Mo3.10 Monday 25thImproving discharge capacitT.S. Composite material We4.12.3 Session We4.12 Wednesday 27thCooperative relationship b G.S. Interfaces and inte We2.13.2 Session We2.13 Wednesday 27thMaterial modeling of 2x2 b G.S. Multiscale modelli Mo2.8.5 Session Mo2.8 Monday 25thExperiments on laminated pG.S. Applications 1 - Ma Th2.6.2 Session Th2.6 Thursday 28thSelf-healing behaviour of i Complex materials for se Th1.3.2 Session Th1.3 Thursday 28th

Web core sandwich bridge dT.S. Composites in civil Tu1.9.1 Session Tu1.9 Tuesday 26thInterface Optimisation of G.S. Interfaces and inte Tu4.10.2 Session Tu4.10 Tuesday 26th3D weaving of near-net pre Tu3.9.2 Session Tu3.9 Tuesday 26thSelf Lubricating Effect of G.S. Hybrid composites We2.10.6 Session We2.10 Wednesday 27thDesign Optimization and FaG.S. Multifunctional co Th3.6.5 Session Th3.6 Thursday 28thMulifunctional composites T.S. New Nanoscale and Mo2.12.2 Session Mo2.12 Monday 25thUtilization of Large Cohesi T.S. Fracture and Dama Th2.2.3 Session Th2.2 Thursday 28thMULTISCALE MODELING OFG.S. Ceramic matrix: Pre We2.14.1 Session We2.14 Wednesday 27thPREDICTION OF THE CRIPP T.S. Composite materials Tu3.5.2 Session Tu3.5 Tuesday 26thKevlar-Based NanocompositeT.S. New Nanoscale and Mo3.12.3 Session Mo3.12 Monday 25thBFRP: qualification and contG.S. Durability and agei Th3.14.3 Session Th3.14 Thursday 28thInvestigation of the most efT.S. Composite Impact Tu1.4.4 Session Tu1.4 Tuesday 26thElectrical-based methods foG.S. Health monitoring - We3.14.3 Session We3.14 Wednesday 27thElectrospinning of hydroxyaT.S. Biocomposites: syn We3.2.2 Session We3.2 Wednesday 27thAbstract Title (write here) G.S. Nanocomposites: Pr We2.6.4 Session We2.6 Wednesday 27thThe effects of moisture and G.S. Hygrothermal durab Th1.14.4 Session Th1.14 Thursday 28thAcoustic emission monitorinT.S. Multiaxial fatigue We2.5.4 Session We2.5 Wednesday 27thSynergistic effects in tern T.S. Daniela Tabuani - F Tu1.3.1 Session Tu1.3 Tuesday 26thDEVELOPMENT OF ANTIBACG.S. Bio-based composit Mo3.14.3 Session Mo3.14 Monday 25thExperimental Analysis by ThG.S. Applications 3 - C Th4.8.4 Session Th4.8 Thursday 28thGrafting carbon nanotubes oG.S. Nanostructured fib Tu1.2.2 Session Tu1.2 Tuesday 26thSynthesis, Morphology and T.S. Polymer composites We4.2.1 Session We4.2 Wednesday 27thInvestigation in MechanicalG.S. Testing and charact Th1.10.5 Session Th1.10 Thursday 28thStructural characterisation T.S. Manufacturing defec We1.9.4 Session We1.9 Wednesday 27thSize effect on transverse cr T.S. Micromechanics an Mo3.9.3 Session Mo3.9 Monday 25thNon destructive evaluation T.S. Thermal methods fo Th2.9.3 Session Th2.9 Thursday 28thSynthesis of Thermoplastic G.S. Interfaces and inte We2.13.4 Session We2.13 Wednesday 27thTHERMAL ANALYSIS AND MT.S. Thermal methods fo Th1.9.3 Session Th1.9 Thursday 28thComputational Models for thG.S. Damage and fractur Tu2.10.4 Session Tu2.10 Tuesday 26thCOMPRESSION AFTER IMPAT.S. Composites for aero We3.5.5 Session We3.5 Wednesday 27thLong-term Effect of Seawa T.S. Effect of aggressi Tu3.4.2 Session Tu3.4 Tuesday 26thCarbon nanotubes buckypapeT.S. CNT nanocomposite Tu4.2.2 Session Tu4.2 Tuesday 26thHSP study on the dispersionG.S. Nanocomposites: Pr We2.6.5 Session We2.6 Wednesday 27thModelling mechanical stresseT.S. Composite material We3.12.2 Session We3.12 Wednesday 27thDesign of light-weight sandwG.S. Sandwich technolog Th3.10.5 Session Th3.10 Thursday 28thECO FRIENDLY CORE SANDWT.S. Composites from R Tu1.13.5 Session Tu1.13 Tuesday 26thDesign optimization of lamiG.S. Optimization of la Mo3.4.5 Session Mo3.4 Monday 25thThe effect of transverse loaT.S. Micromechanics an Mo3.9.4 Session Mo3.9 Monday 25thTensile mechanical propertiT.S. Graphene-based Po Th1.5.2 Session Th1.5 Thursday 28thTHE LOCUS OF FAILURE OF G.S. Interfaces and inte We2.13.3 Session We2.13 Wednesday 27thViscoelastic Behavior of C G.S. Sandwich technolog Th3.10.4 Session Th3.10 Thursday 28thCharacterisation of Impact G.S. Damage and fractur Mo4.6.2 Session Mo4.6 Monday 25thThe influence of textile ar T.S. Composites under d Tu2.5.5 Session Tu2.5 Tuesday 26thMultiscale modeling of hyg G.S. Multiscale modelli Th3.5.1 Session Th3.5 Thursday 28thPoly(lactic acid)/hydroxyap G.S. Bio-based composit Mo4.1.4 Session Mo4.1 Monday 25thPreparation of Poly (vinyla G.S. Nanocomposites: Sy Th3.11.1 Session Th3.11 Thursday 28thStructure Dependent Inter G.S. Interfaces and inte We2.13.5 Session We2.13 Wednesday 27thIMPACT OF CONTINUOUS ATG.S. Interfaces and inte Tu4.10.3 Session Tu4.10 Tuesday 26th

T.S. 3D fiber preforming for composite structures

Characteristic of mode I cr T.S. CNT nanocomposite Tu4.2.3 Session Tu4.2 Tuesday 26thExperimental Analysis of thG.S. Nanocomposites: Sy Th2.11.4 Session Th2.11 Thursday 28thCharacterization of Carbon O.N.R. session Mo3.5.2 Session Mo3.5 Monday 25thSynthesis of nanocompositeG.S. Mechanical and phy Th2.7.2 Session Th2.7 Thursday 28thBioinspired clay nanocomposG.S. Nanocomposites: Sy Th2.11.5 Session Th2.11 Thursday 28thEvaluation of mode I inter G.S. Experimental Techni We3.8.4 Session We3.8 Wednesday 27thModelling the fire respons T.S. Daniela Tabuani - F Tu3.3.3 Session Tu3.3 Tuesday 26thModelling of composite repaT.S. Composites repair We3.7.1 Session We3.7 Wednesday 27thExperimental and numerical T.S. Composites in civil Tu1.9.2 Session Tu1.9 Tuesday 26thOn the Way to Smart Bi-ReiT.S. Multiscale modelli Tu4.1.2 Session Tu4.1 Tuesday 26thWarm-shaped loop connectioT.S. Joints in composite Mo3.7.4 Session Mo3.7 Monday 25thAdvanced Mechanical JustifT.S. Fracture and Dama Th2.2.4 Session Th2.2 Thursday 28thVoid prediction during Liq G.S. Multiscale modellin Mo4.8.2 Session Mo4.8 Monday 25thMode I fracture toughness bG.S. Mechanical and phy Th1.7.2 Session Th1.7 Thursday 28thMultiscale Molecular SimulG.S. Multiscale modellin Mo4.8.1 Session Mo4.8 Monday 25thPoly(ï¥-caprolactone) rei� G.S. Fibers and matrices Tu1.14.1 Session Tu1.14 Tuesday 26thInvestigation of damage mecT.S. Composites under d Tu1.5.4 Session Tu1.5 Tuesday 26thNonlinear Dynamic BehaviouT.S. Composites under d Tu1.5.5 Session Tu1.5 Tuesday 26thNonlinear Vibro-Acoustic G.S. Damage and fractu Th3.13.1 Session Th3.13 Thursday 28thMicrostructure and Electro G.S. Ceramic matrix: Pre We2.14.6 Session We2.14 Wednesday 27thEffect of AlN content on t G.S. Ceramic matrix: Mo Th4.5.4 Session Th4.5 Thursday 28thEffect of reinforcement ConT.S. Metal matrix compo Th3.12.4 Session Th3.12 Thursday 28thSHAKEDOWN LIMIT IN BRITG.S. FRP reinforced con Th3.9.5 Session Th3.9 Thursday 28thA new generation of J integT.S. Delamination and i Tu4.7.2 Session Tu4.7 Tuesday 26thEnhancing interfacial bodi T.S. Interfaces and Inte We3.13.5 Session We3.13 Wednesday 27thFRP DEBONDING PREVENTIG.S. FRP reinforced con Th3.9.3 Session Th3.9 Thursday 28thA computational model for G.S. Damage and fractur Tu3.10.4 Session Tu3.10 Tuesday 26thEvaluation of the strain fie T.S. Joining of composit We1.11.4 Session We1.11 Wednesday 27thStructural optimisation of T.S. Composites for aut Tu2.8.1 Session Tu2.8 Tuesday 26thControlling tissue growth b Complex materials for se We4.3.2 Session We4.3 Wednesday 27thRECOVERY AND REMODELLIComplex materials for se We3.3.5 Session We3.3 Wednesday 27thBIOMIMICRY OF MECHANOTComplex materials for se Th1.3.4 Session Th1.3 Thursday 28thEffect of the shear correct G.S. Multifunctional co Th4.6.2 Session Th4.6 Thursday 28thStatic and Time-Resolved S T.S. New Nanoscale and Mo2.12.4 Session Mo2.12 Monday 25thChallenges for Insertion of T.S. New Nanoscale and Mo3.12.1 Session Mo3.12 Monday 25thNature’s self-repairing Complex materials for se We2.3.1 Session We2.3 Wednesday 27thEFFECT OF CNT CHIRALITY G.S. Nanostructured fib Tu1.2.1 Session Tu1.2 Tuesday 26thMolecular Design Rules for Complex materials for se Th2.3.1 Session Th2.3 Thursday 28thOn the delamination of multT.S. Delamination and i Tu4.7.3 Session Tu4.7 Tuesday 26thImpact tests and simulationT.S. Composite materials Tu3.5.3 Session Tu3.5 Tuesday 26thVitrimers, organic materialsComplex materials for se We2.3.2 Session We2.3 Wednesday 27thRegeneration of Native AntComplex materials for se We4.3.4 Session We4.3 Wednesday 27thOsteocyte networks and coComplex materials for se We3.3.1 Session We3.3 Wednesday 27thInstructive hydrogels in bo Complex materials for se We4.3.5 Session We4.3 Wednesday 27th

T.S. Composite material We1.12.2 Session We1.12 Wednesday 27thStructural Composite CapaciT.S. Composite material We2.12.5 Session We2.12 Wednesday 27thSelf-Patterning Vascular SysComplex materials for se We3.3.4 Session We3.3 Wednesday 27thComputational Modeling anComplex materials for se We3.3.2 Session We3.3 Wednesday 27th

Multifunctional Epoxy Resin for Structural Supercapacitors

Injectable Weight-bearing Complex materials for se We2.3.5 Session We2.3 Wednesday 27thComposite edge profiles forT.S. Composites in civil Tu1.9.3 Session Tu1.9 Tuesday 26thMechanical behavior of CFRPG.S. FRP reinforced con Th3.9.2 Session Th3.9 Thursday 28thAnisotropic polymer composT.S. Structure-property We4.5.2 Session We4.5 Wednesday 27thMulti-layered composites wiT.S. Daniela Tabuani - F Tu3.3.4 Session Tu3.3 Tuesday 26thPreparation of Graphene OxT.S. Graphene-based Po Th2.5.3 Session Th2.5 Thursday 28thAbstract Title (Thermo-MecG.S. Experimental Techni We3.8.5 Session We3.8 Wednesday 27thScaling Relationships for B Complex materials for se Th2.3.2 Session Th2.3 Thursday 28thComputer simulation of str Complex materials for se Th1.3.3 Session Th1.3 Thursday 28thPressurized Vascular SystemComplex materials for se We3.3.3 Session We3.3 Wednesday 27thInfluence of Different Orga G.S. Nanocomposites: M We4.9.4 Session We4.9 Wednesday 27thBonded Repair of CFRP PrimaT.S. Composites repair We4.7.4 Session We4.7 Wednesday 27thMEASUREMENT OF PERMEABIT.S. Liquid composite m Tu1.11.5 Session Tu1.11 Tuesday 26thModeling transverse crackinT.S. Micromechanics an Mo4.9.1 Session Mo4.9 Monday 25thFabrication Method and MecG.S. Bio-based composit Th2.4.3 Session Th2.4 Thursday 28thOptimal Design of Damping G.S. Design of composit Mo2.4.1 Session Mo2.4 Monday 25thCHARACTERIZATION OF GL T.S. Structural Perfor We1.5.1 Session We1.5 Wednesday 27thAN EXPERIMENTAL STUDY T.S. Joints in composite Mo4.7.5 Session Mo4.7 Monday 25thDevelopment of a post-procG.S. Nanostructured fib Tu1.2.3 Session Tu1.2 Tuesday 26thSTUDY ON THE DEGRADATIG.S. Nanocomposites: M Mo3.14.6 Session Mo3.14 Monday 25thStrain and Damage Sensing T.S. Structural Health M Tu4.14.1 Session Tu4.14 Tuesday 26thPreparation and characterizG.S. Nanocomposites: Pr We3.6.2 Session We3.6 Wednesday 27thThe numerical analysis of dT.S. Multiscale analysis We2.1.5 Session We2.1 Wednesday 27thShape Optimization Method G.S. Design of composit Mo2.4.2 Session Mo2.4 Monday 25thAnalytical studies on the G.S. Damage and fractur Tu3.10.3 Session Tu3.10 Tuesday 26thPreparation of bioactive ch T.S. Organic-inorganic c Th4.1.5 Session Th4.1 Thursday 28thMechano-biology & aging: Complex materials for se We1.3.3 Session We1.3 Wednesday 27thCruciform specimen design fG.S. Testing and charact Th2.10.4 Session Th2.10 Thursday 28thTooth enamel as a smart bioG.S. Bio-based composit Th3.4.4 Session Th3.4 Thursday 28thFinite element modelling ofG.S. Estimation of dura Th2.14.3 Session Th2.14 Thursday 28thMixed-mode (I/II) fracture sG.S. Experimental Techni We1.8.5 Session We1.8 Wednesday 27thDefect identification and c T.S. Manufacturing defec We1.9.5 Session We1.9 Wednesday 27thInvestigation of anti-ablati G.S. Mechanical and phy Mo4.10.2 Session Mo4.10 Monday 25thConductive structural adhesG.S. Nanocomposites: Ap Th1.11.3 Session Th1.11 Thursday 28thPreparation and CharacteriG.S. Nanocomposites: Pr We3.6.3 Session We3.6 Wednesday 27thWOVEN FLAX FABRIC FIBERG.S. Bio-based composit Th2.4.5 Session Th2.4 Thursday 28thCarbon Capture with NaturG.S. Bio-based composit Mo4.1.5 Session Mo4.1 Monday 25thPull-through Failure Predic T.S. Joints in composite Mo3.7.5 Session Mo3.7 Monday 25thFatigue Damage CharacterizaT.S. Textile composites We2.7.5 Session We2.7 Wednesday 27thEffects of mesoporous sil T.S. Advances in Nanoc Tu2.6.4 Session Tu2.6 Tuesday 26thEXPERIMENTAL INVESTIGATT.S. Fracture and Dama Th2.2.5 Session Th2.2 Thursday 28thTextile Reinforced Mortar T.S. Composites in civil Tu2.9.4 Session Tu2.9 Tuesday 26thCure Monitoring of ComposG.S. Processing and man We4.4.3 Session We4.4 Wednesday 27thThin and Lightweight RadarT.S. Composites for win Mo4.5.5 Session Mo4.5 Monday 25thThe Long-Term Water AbsorpG.S. Hygrothermal durab Th1.14.5 Session Th1.14 Thursday 28thMechanical behavior of tuf G.S. Mechanical and phy Th3.7.4 Session Th3.7 Thursday 28thBuckling analysis of Variab G.S. Applications 1 - Ma Th2.6.3 Session Th2.6 Thursday 28thMechanochemical ApproachComplex materials for se Th1.3.5 Session Th1.3 Thursday 28th

Modelling low to high velocT.S. Composite Impact Tu1.4.5 Session Tu1.4 Tuesday 26thSelf-Healing Materials – Complex materials for se We1.3.2 Session We1.3 Wednesday 27thCentrifugal Preparation of G.S. Nanocomposites: Pr We4.6.1 Session We4.6 Wednesday 27thDynamic Mechanical PropertT.S. Mechanics of nano Tu3.1.5 Session Tu3.1 Tuesday 26thCOMBUSTION BEHAVIOUR OFT.S. Daniela Tabuani - F Tu4.3.1 Session Tu4.3 Tuesday 26thImproving the interface in G.S. Bio-based composit Mo4.1.2 Session Mo4.1 Monday 25thMODELLING AND IDENTIFI T.S. Composites for aero We3.5.6 Session We3.5 Wednesday 27thStudy on T-Bolt Bearing Str T.S. Joining of composit We3.11.6 Session We3.11 Wednesday 27thFatigue Damage PropagationT.S. Fracture and Dama Th3.2.1 Session Th3.2 Thursday 28thHard tissue formation in a T.S. Organic-inorganic c Th4.1.4 Session Th4.1 Thursday 28thAbstract Title (write here) T.S. Structural Health M Tu4.14.2 Session Tu4.14 Tuesday 26thWhisker reinforced HA/PLA-T.S. Organic-inorganic c Th4.1.3 Session Th4.1 Thursday 28thEconomical Validation of a G.S. Low cost technolog We4.11.3 Session We4.11 Wednesday 27thSecond grade modeling and sT.S. Multiscale analysis We1.1.1 Session We1.1 Wednesday 27thMechanical properties and G.S. Mechanical and phy Mo3.10.1 Session Mo3.10 Monday 25thFLAME IGNITION MECHANIT.S. Daniela Tabuani - F Tu1.3.5 Session Tu1.3 Tuesday 26thAn influence of carbon partT.S. Composites for aut Tu2.8.2 Session Tu2.8 Tuesday 26thStringer stiffened panel un T.S. Composite materials Tu3.5.4 Session Tu3.5 Tuesday 26thFailure of notched compositG.S. Damage and fractur Tu1.10.4 Session Tu1.10 Tuesday 26thMechanical Properties of T.S. Advances in Nanoc Tu2.6.2 Session Tu2.6 Tuesday 26thInfluence of Injection Mold G.S. Estimation of dura Th2.14.4 Session Th2.14 Thursday 28thTHE COMPACTION OF UNCUT.S. Processing and Fab Tu4.11.1 Session Tu4.11 Tuesday 26thHomogenous functional polyT.S. New Nanoscale and Mo3.12.5 Session Mo3.12 Monday 25thMechanical properties analyT.S. Biocomposites: syn We3.2.3 Session We3.2 Wednesday 27thEffect of the bonding layer T.S. Composites under d Tu2.5.1 Session Tu2.5 Tuesday 26thRate and Temperature DepeG.S. Multiscale modellin Mo4.8.3 Session Mo4.8 Monday 25thNanomechanics of antler b T.S. Mechanics of nano Tu3.1.3 Session Tu3.1 Tuesday 26thToughening of high-strengthT.S. Fracture and Dama Th4.2.3 Session Th4.2 Thursday 28thA fluid-structure interactio G.S. Low cost technolog We4.11.4 Session We4.11 Wednesday 27thUsing the Incremental Hole-G.S. Testing and charact Th2.10.5 Session Th2.10 Thursday 28thNanomechanics ApplicationsComplex materials for se We4.3.1 Session We4.3 Wednesday 27thMolecular Dynamics simulaT.S. Shock compression Tu3.12.2 Session Tu3.12 Tuesday 26thComposite mechanically fastT.S. Joints in composite Mo4.7.2 Session Mo4.7 Monday 25thPROGRESSIVE DAMAGE IN T.S. Shock compression Tu3.12.4 Session Tu3.12 Tuesday 26thInsitu SAXS/WAXS study of G.S. Multifunctional co Th4.6.1 Session Th4.6 Thursday 28thCarbon nanotube composite fT.S. New Nanoscale and Mo2.12.1 Session Mo2.12 Monday 25thEffect of Fluid Structure I O.N.R. session Mo2.5.3 Session Mo2.5 Monday 25thDamage progression in compoO.N.R. session Mo2.5.4 Session Mo2.5 Monday 25thEffect of Plate Curvature o O.N.R. session Mo2.5.2 Session Mo2.5 Monday 25thCOMPREHENSIVE METHODOLOT.S. Daniela Tabuani - F Tu2.3.5 Session Tu2.3 Tuesday 26thFlammability Assessment forT.S. Daniela Tabuani - F Tu4.3.2 Session Tu4.3 Tuesday 26thInfluence of fiber surface T.S. Interfaces and Inte We3.13.3 Session We3.13 Wednesday 27thAdding Value to Brazilian FiG.S. Bio-based composit Mo4.1.3 Session Mo4.1 Monday 25thComposites based on poly(buG.S. Bio-based composit Th1.4.3 Session Th1.4 Thursday 28thBeta-crystallized Interphas T.S. Interfaces and Inte We3.13.4 Session We3.13 Wednesday 27thA Primal-Dual Backtracking G.S. Design of composit Mo2.4.3 Session Mo2.4 Monday 25thLIQUID INJECTION MOLDINGT.S. Liquid composite m Tu1.11.2 Session Tu1.11 Tuesday 26thBio-mimetic scaffolds for ceComplex materials for se We4.3.3 Session We4.3 Wednesday 27th

Fire behavior and thermal sT.S. Daniela Tabuani - F Tu3.3.2 Session Tu3.3 Tuesday 26thA METHODOLOGY TO CALCT.S. Advances in Nanoc Tu1.6.2 Session Tu1.6 Tuesday 26thCeramic- elastomer composiT.S. Composite materials Tu3.8.3 Session Tu3.8 Tuesday 26thConstitutive Behaviour of GT.S. Composites under d Tu2.5.2 Session Tu2.5 Tuesday 26thFINITE ELEMENT BUCKLINGT.S. Micromechanics an Mo4.9.2 Session Mo4.9 Monday 25thA new method to measure crT.S. Structural Perfor We1.5.2 Session We1.5 Wednesday 27thDetection of ContaminationT.S. Composites repair We3.7.2 Session We3.7 Wednesday 27thStudy of double step lap coT.S. Composites repair We3.7.3 Session We3.7 Wednesday 27thOn field repair of primary T.S. Composites repair We3.7.4 Session We3.7 Wednesday 27thPrimary principal compositeT.S. Composites repair We3.7.5 Session We3.7 Wednesday 27thFracture toughness enhancT.S. Mechanics of nano Tu2.1.2 Session Tu2.1 Tuesday 26thA multiscale analytical mo T.S. Mechanics of nano Tu2.1.3 Session Tu2.1 Tuesday 26thDamage mechanics in composT.S. Multiaxial fatigue We2.5.1 Session We2.5 Wednesday 27thModelling of crack initiatio T.S. Multiaxial fatigue We2.5.2 Session We2.5 Wednesday 27thStochastic cracking evolutioT.S. Multiaxial fatigue We2.5.3 Session We2.5 Wednesday 27thAn overview of the ONR so O.N.R. session Mo2.5.1 Session Mo2.5 Monday 25thLifetime assessment of plasT.S. Effect of aggressi Tu3.4.3 Session Tu3.4 Tuesday 26thExperimental and numerical T.S. Composites for aut Tu2.8.3 Session Tu2.8 Tuesday 26thA preliminary study of physT.S. Sustainable Compos Th2.8.3 Session Th2.8 Thursday 28thEffects of Architectural Va T.S. Manufacturing defec We2.9.1 Session We2.9 Wednesday 27thEXPLICIT FEM SIMULATIONT.S. Composite materials Tu4.5.2 Session Tu4.5 Tuesday 26thComposite material simulatG.S. Applications 1 - Ma Th2.6.4 Session Th2.6 Thursday 28thComposites in buildings and T.S. Composites in civil Tu2.9.1 Session Tu2.9 Tuesday 26thInfluence of mechanical r G.S. Recycling We4.10.4 Session We4.10 Wednesday 27thExperimental and ComputatT.S. New Nanoscale and Mo2.12.5 Session Mo2.12 Monday 25thOrganic-inorganic compositeT.S. Organic-inorganic c Th4.1.1 Session Th4.1 Thursday 28th

Complex materials for se We1.3.1 Session We1.3 Wednesday 27thT.S. Daniela Tabuani - F Tu4.3.3 Session Tu4.3 Tuesday 26th

Time

11.20 - 11.408.30 - 8.50

16.50 - 17.1014.50 - 15.1015.50 - 16.1016.30 - 16.50

8.30 - 8.5014.50 - 15.1016.10 - 16.30

8.50 - 9.109.10 - 9.30

16.50 - 17.1011.40 - 12.0012.20 - 12.40

9.10 - 9.3016.10 - 16.3013.00-13.209.30 - 9.50

16.10 - 16.308.30 - 8.50

14.50 - 15.1012.20 - 12.4014.50 - 15.1012.00 - 12.2018.10 - 18.30

8.30 - 8.5017.30 - 17.5017.30 - 17.5014.50 - 15.10

8.50 - 9.109.50 - 10.10

16.50 - 17.108.50 - 9.10

11.20 - 11.409.10 - 9.30

12.00 - 12.208.30 - 8.50

15.30 - 15.509.10 - 9.30

11.20 - 11.4012.00 - 12.2014.50 - 15.1016.50 - 17.1012.00 - 12.20

8.30 - 8.5011.20 - 11.40

12.40 - 13.0013.00 - 13.2012.20 - 12.4013.00-13.208.30 - 8.509.30 - 9.50

15.10 - 15.3012.00 - 12.209.50 - 10.10

16.10 - 16.3014.50 - 15.1016.50 - 17.10

8.30 - 8.5015.30 - 15.50

9.10 - 9.3015.50 - 16.1015.10 - 15.3012.00 - 12.2012.40 - 13.0012.00 - 12.20

8.30 - 8.5011.40 - 12.0011.20 - 11.4015.50 - 16.1012.40 - 13.0012.00 - 12.20

8.30 - 8.508.30 - 8.50

17.10 - 17.3011.40 - 12.00

9.10 - 9.3017.30 - 17.5015.10 - 15.3014.50 - 15.1015.30 - 15.5015.30 - 15.5012.00 - 12.2012.00 - 12.2011.20 - 11.4013.00-13.20

16.50 - 17.1011.20 - 11.4017.30 - 17.5011.20 - 11.4018.10 - 18.3016.50 - 17.1011.40 - 12.0014.50 - 15.10

14.50 - 15.1015.30 - 15.50

9.30 - 9.5011.20 - 11.40

8.30 - 8.5016.30-16.509.30 - 9.508.50 - 9.10

11.40 - 12.0016.50 - 17.1017.30 - 17.5018.10 - 18.309.50 - 10.10

11.20 - 11.4012.40 - 13.0017.30 - 17.5017.30 - 17.5011.40 - 12.0012.20 - 12.409.50 - 10.10

15.10 - 15.3012.20 - 12.40

8.30 - 8.508.30 - 8.50

12.20 - 12.408.50 - 9.10

11.20 - 11.4011.40 - 12.0015.50 - 16.10

8.30 - 8.509.10 - 9.30

14.50 - 15.1012.20 - 12.4016.50 - 17.1018.10 - 18.3012.40 - 13.0015.10 - 15.3015.30 - 15.5012.40 - 13.0014.50 - 15.1011.40 - 12.0011.20 - 11.4011.20 - 11.4012.40 - 13.0014.50 - 15.10

8.30 - 8.5011.20 - 11.409.50 - 10.10

17.50 - 18.1011.40 - 12.0014.50 - 15.1015.30 - 15.5012.20 - 12.40

9.30 - 9.508.50 - 9.10

12.00 - 12.2011.40 - 12.0015.10 - 15.3016.50 - 17.1011.40 - 12.0011.20 - 11.40

8.50 - 9.1011.20 - 11.4012.20 - 12.40

9.10 - 9.3016.50 - 17.1011.20 - 11.4015.10 - 15.3012.20 - 12.40

9.10 - 9.3015.10 - 15.3011.20 - 11.4015.10 - 15.3018.10 - 18.3011.20 - 11.4015.30 - 15.5015.10 - 15.3014.50 - 15.1014.50 - 15.1013.00-13.20

18.10 - 18.3011.40 - 12.0015.10 - 15.30

9.30 - 9.509.10 - 9.30

17.10 - 17.3012.20 - 12.4014.50 - 15.1015.50 - 16.1016.10 - 16.3015.50 - 16.1016.10 - 16.309.50 - 10.10

11.40 - 12.0011.20 - 11.40

9.10 - 9.30

15.30 - 15.509.30 - 9.50

11.40 - 12.0016.10 - 16.3017.10 - 17.3016.10 - 16.3011.20 - 11.4011.40 - 12.00

9.10 - 9.3014.50 - 15.1015.50 - 16.10

8.50 - 9.108.50 - 9.10

17.50 - 18.1017.50 - 18.1013.00-13.20

11.20 - 11.4011.20 - 11.4011.40 - 12.0015.10 - 15.3012.00 - 12.20

8.30 - 8.5012.00 - 12.20

9.30 - 9.5017.10 - 17.3017.30 - 17.50

8.30 - 8.5011.20 - 11.4011.40 - 12.0011.40 - 12.0017.30 - 17.5016.50 - 17.1012.00 - 12.2011.40 - 12.0012.40 - 13.0018.10 - 18.3015.10 - 15.30

9.30 - 9.5012.00 - 12.2015.10 - 15.30

9.30 - 9.5015.10 - 15.3014.50 - 15.109.50 - 10.109.30 - 9.50

12.00 - 12.209.30 - 9.50

14.50 - 15.10

9.50 - 10.109.50 - 10.108.30 - 8.50

12.00 - 12.2018.10 - 18.3015.10 - 15.3012.20 - 12.4015.30 - 15.5015.50 - 16.1011.40 - 12.0015.30 - 15.5015.50 - 16.1012.20 - 12.4017.30 - 17.5016.10 - 16.30

8.50 - 9.1011.20 - 11.4012.00 - 12.20

9.30 - 9.5016.30 - 16.509.50 - 10.10

15.50 - 16.1014.50 - 15.1012.40 - 13.0015.30 - 15.50

9.10 - 9.3016.10 - 16.3011.40 - 12.0016.50 - 17.1017.50 - 18.10

9.10 - 9.308.50 - 9.10

18.10 - 18.309.50 - 10.109.30 - 9.50

15.10 - 15.3012.00 - 12.20

9.30 - 9.5015.30 - 15.5016.50 - 17.1012.20 - 12.4015.50 - 16.1012.40 - 13.0015.10 - 15.3014.50 - 15.1015.30 - 15.5011.40 - 12.0016.50 - 17.10

12.40 - 13.0014.50 - 15.1015.10 - 15.30

9.30 - 9.5016.50 - 17.10

8.30 - 8.5012.40 - 13.0011.20 - 11.4017.10 - 17.30

8.30 - 8.5015.30 - 15.5016.50 - 17.1017.50 - 18.1015.50 - 16.109.50 - 10.10

12.40 - 13.009.50 - 10.10

12.40 - 13.0017.30 - 17.5012.20 - 12.4011.20 - 11.4012.20 - 12.4017.10 - 17.30

9.30 - 9.5015.30 - 15.5015.30 - 15.5018.10 - 18.30

8.30 - 8.509.50 - 10.10

15.50 - 16.1015.50 - 16.1011.20 - 11.4012.00 - 12.2014.50 - 15.1015.10 - 15.3015.50 - 16.1012.00 - 12.2015.30 - 15.5016.50 - 17.1016.10 - 16.30

9.30 - 9.5012.20 - 12.4016.10 - 16.3011.20 - 11.40

8.50 - 9.1014.50 - 15.1015.50 - 16.10

8.50 - 9.10

16.10 - 16.3012.00 - 12.2015.10 - 15.3012.40 - 13.0014.50 - 15.10

8.50 - 9.1016.50 - 17.10

9.10 - 9.3016.30-16.50

17.10 - 17.3012.20 - 12.4016.10 - 16.3011.40 - 12.0012.00 - 12.2012.20 - 12.4018.10 - 18.30

9.10 - 9.3016.10 - 16.3012.20 - 12.4015.10 - 15.3016.10 - 16.3011.20 - 11.4014.50 - 15.1015.50 - 16.1016.50 - 17.1012.20 - 12.4014.50 - 15.10

9.10 - 9.3016.10 - 16.3017.10 - 17.3016.10 - 16.3015.30 - 15.5011.40 - 12.00

8.30 - 8.508.50 - 9.10

15.30 - 15.5012.20 - 12.4017.10 - 17.3015.50 - 16.1017.10 - 17.3015.10 - 15.3015.30 - 15.5016.10 - 16.3015.50 - 16.1017.30 - 17.5016.50 - 17.1016.10 - 16.309.50 - 10.10

17.10 - 17.3015.10 - 15.3012.20 - 12.4017.50 - 18.10

8.30 - 8.5012.40 - 13.0017.10 - 17.3017.50 - 18.1016.50 - 17.1015.30 - 15.5017.10 - 17.3016.50 - 17.1015.50 - 16.10

8.30 - 8.5014.50 - 15.1017.50 - 18.10

9.10 - 9.309.50 - 10.10

14.50 - 15.1012.20 - 12.4017.30 - 17.5017.10 - 17.3015.50 - 16.10

8.50 - 9.108.30 - 8.50

16.10 - 16.3016.50 - 17.1011.40 - 12.0011.40 - 12.0011.40 - 12.00

8.30 - 8.5012.40 - 13.0011.40 - 12.0011.20 - 11.4012.00 - 12.2017.10 - 17.3011.20 - 11.4013.00 - 13.2012.00 - 12.2015.30 - 15.5015.50 - 16.10

8.50 - 9.1018.10-18.30

11.40 - 12.0017.10 - 17.3016.30 - 16.5011.40 - 12.009.50 - 10.10

12.00 - 12.209.30 - 9.50

16.10 - 16.3016.10 - 16.309.50 - 10.10

17.30 - 17.5012.20 - 12.4012.20 - 12.4012.40 - 13.0016.30 - 16.5011.20 - 11.4016.50 - 17.1012.20 - 12.4017.10 - 17.30

8.50 - 9.1017.50 - 18.1017.30 - 17.50

8.50 - 9.109.30 - 9.50

15.10 - 15.3016.50 - 17.1012.20 - 12.409.50 - 10.108.30 - 8.50

14.50 - 15.1015.30 - 15.5015.50 - 16.1015.30 - 15.5011.20 - 11.4011.40 - 12.0012.40 - 13.00

9.10 - 9.309.10 - 9.308.50 - 9.10

11.20 - 11.408.50 - 9.10

9.50 - 10.1012.20 - 12.4012.00 - 12.2012.20 - 12.4012.00 - 12.2016.10 - 16.3014.50 - 15.1017.10 - 17.3015.30 - 15.5015.30 - 15.5015.10 - 15.3015.50 - 16.10

17.10 - 17.3016.50 - 17.1012.40 - 13.0015.10 - 15.3015.10 - 15.3012.00 - 12.2014.50 - 15.10

8.50 - 9.1017.30 - 17.50

9.30 - 9.5012.40 - 13.0012.40 - 13.0014.50 - 15.1016.50 - 17.1014.50 - 15.10

9.10 - 9.3012.20 - 12.40

9.30 - 9.5016.10 - 16.30

8.50 - 9.108.30 - 8.509.30 - 9.50

15.10 - 15.3012.20 - 12.4015.10 - 15.30

9.10 - 9.3017.10 - 17.3014.50 - 15.1012.00 - 12.20

9.30 - 9.5017.10 - 17.3015.10 - 15.3017.30 - 17.5014.50 - 15.109.50 - 10.10

11.40 - 12.0012.00 - 12.2011.40 - 12.00

8.50 - 9.1012.40 - 13.0016.50 - 17.109.50 - 10.10

15.30 - 15.5012.00 - 12.2015.30 - 15.509.50 - 10.10

15.10 - 15.3011.40 - 12.00

17.30 - 17.5016.50 - 17.10

9.10 - 9.3017.30 - 17.5017.10 - 17.3015.50 - 16.10

8.30 - 8.5015.10 - 15.3015.10 - 15.3015.50 - 16.1014.50 - 15.1011.40 - 12.0015.30 - 15.5012.00 - 12.20

8.50 - 9.108.30 - 8.50

16.10 - 16.3016.50 - 17.1017.30 - 17.5012.40 - 13.0016.10 - 16.3016.30 - 16.5015.50 - 16.1017.50 - 18.1016.50 - 17.1011.20 - 11.4015.30 - 15.50

9.10 - 9.3018.10 - 18.30

8.50 - 9.1017.10 - 17.3012.40 - 13.0017.10 - 17.3017.10 - 17.3015.10 - 15.3015.50 - 16.1016.50 - 17.1017.50 - 18.10

9.10 - 9.3015.50 - 16.10

9.10 - 9.309.10 - 9.308.50 - 9.10

17.30 - 17.5012.20 - 12.4015.30 - 15.5017.30 - 17.5016.10 - 16.30

8.50 - 9.1014.50 - 15.10

9.30 - 9.5017.10 - 17.3017.30 - 17.5012.00 - 12.2011.20 - 11.4012.20 - 12.4012.40 - 13.009.50 - 10.10

15.50 - 16.108.50 - 9.10

15.50 - 16.1017.30 - 17.5012.00 - 12.2012.20 - 12.4017.30 - 17.5011.20 - 11.40

9.30 - 9.5017.50 - 18.1017.50 - 18.1017.30 - 17.50

8.30 - 8.5017.30 - 17.5015.50 - 16.1017.10 - 17.3015.10 - 15.3017.10 - 17.3015.30 - 15.50

9.10 - 9.308.30 - 8.508.30 - 8.509.10 - 9.309.10 - 9.30

12.40 - 13.0017.30 - 17.5011.40 - 12.0016.10 - 16.30

8.50 - 9.1017.50 - 18.1011.20 - 11.4012.40 - 13.0018.10 - 18.30

9.30 - 9.508.50 - 9.109.30 - 9.50

12.00 - 12.2016.10 - 16.30

11.40 - 12.0011.20 - 11.40

9.30 - 9.5017.50 - 18.1011.20 - 11.4017.10 - 17.3014.50 - 15.1014.50 - 15.1012.40 - 13.0013.00-13.208.30 - 8.50

18.10 - 18.308.50 - 9.10

15.50 - 16.109.50 - 10.10

16.10 - 16.3014.50 - 15.1014.50 - 15.1017.30 - 17.5017.50 - 18.1015.50 - 16.1011.20 - 11.4016.10 - 16.3012.40 - 13.0012.20 - 12.4012.20 - 12.4015.30 - 15.5017.50 - 18.1016.10 - 16.30

9.10 - 9.3015.50 - 16.1017.50 - 18.1015.30 - 15.5015.10 - 15.3015.10 - 15.3012.00 - 12.2017.50 - 18.1017.10 - 17.30

9.10 - 9.3012.00 - 12.2015.50 - 16.1011.20 - 11.4016.10 - 16.3014.50 - 15.1012.00 - 12.2012.20 - 12.4011.40 - 12.0012.40 - 13.00

12.20 - 12.4017.10 - 17.3011.40 - 12.0015.10 - 15.30

9.10 - 9.3015.10 - 15.3015.50 - 16.1011.40 - 12.0014.50 - 15.109.50 - 10.10

15.10 - 15.3015.50 - 16.1016.50 - 17.1016.30 - 16.5016.10 - 16.3012.20 - 12.4016.10 - 16.309.50 - 10.10

16.50 - 17.1012.20 - 12.4012.00 - 12.2011.40 - 12.0015.30 - 15.50

9.30 - 9.5015.50 - 16.1017.30 - 17.5016.50 - 17.1015.50 - 16.10

9.30 - 9.5011.20 - 11.4015.10 - 15.30

9.10 - 9.309.30 - 9.50

12.40 - 13.009.50 - 10.10

12.00 - 12.209.30 - 9.50

12.40 - 13.009.30 - 9.50

17.50 - 18.1017.30 - 17.5012.00 - 12.2015.30 - 15.5017.30 - 17.5011.40 - 12.0012.40 - 13.0011.40 - 12.00

8.50 - 9.10

8.30 - 8.5017.10 - 17.3015.10 - 15.3013.00 - 13.2016.10 - 16.3011.40 - 12.0012.00 - 12.2011.20 - 11.4015.10 - 15.3015.30 - 15.5015.30 - 15.50

9.30 - 9.5015.30 - 15.5015.10 - 15.3012.20 - 12.40

9.30 - 9.5012.20 - 12.40

8.30 - 8.5015.30 - 15.5017.50 - 18.10

8.50 - 9.1016.50 - 17.109.50 - 10.109.30 - 9.50

15.30 - 15.5012.00 - 12.2012.20 - 12.40

9.10 - 9.3012.20 - 12.4016.10 - 16.3015.10 - 15.3017.10 - 17.3012.40 - 13.0015.10 - 15.3016.10 - 16.309.50 - 10.10

16.10 - 16.3015.50 - 16.10

8.50 - 9.1012.00 - 12.2015.50 - 16.1017.10 - 17.3012.40 - 13.0014.50 - 15.1017.50 - 18.1014.50 - 15.1012.40 - 13.0017.30 - 17.50

17.30 - 17.5012.20 - 12.4015.10 - 15.3011.40 - 12.0012.40 - 13.0015.50 - 16.1015.30 - 15.5014.50 - 15.10

8.50 - 9.1017.10 - 17.3015.50 - 16.1012.20 - 12.4017.10 - 17.30

8.50 - 9.1016.50 - 17.10

8.30 - 8.509.30 - 9.50

9.50 - 10.1014.50 - 15.1013.00 - 13.2017.50 - 18.1015.50 - 16.1016.10 - 16.3017.10 - 17.3016.10 - 16.3015.30 - 15.5015.50 - 16.10

9.30 - 9.5011.20 - 11.4017.10 - 17.3016.10 - 16.30

9.30 - 9.5017.10 - 17.3012.20 - 12.4014.50 - 15.1011.20 - 11.40

8.30 - 8.5011.20 - 11.4017.30 - 17.5015.30 - 15.5011.40 - 12.0017.50 - 18.1014.50 - 15.1018.10 - 18.30

8.50 - 9.1012.40 - 13.0015.50 - 16.1015.10 - 15.30

12.40 - 13.009.10 - 9.30

15.10 - 15.3017.10 - 17.3015.50 - 16.1012.00 - 12.2016.10 - 16.3011.40 - 12.00

9.10 - 9.3015.30 - 15.5017.50 - 18.1017.50 - 18.109.50 - 10.10

16.50 - 17.1012.00 - 12.2011.20 - 11.40

8.30 - 8.5018.10 - 18.30

9.10 - 9.3016.30 - 16.5016.50 - 17.1015.10 - 15.3012.40 - 13.0011.40 - 12.0015.30 - 15.5018.10 - 18.30

9.10 - 9.3012.20 - 12.4015.50 - 16.1012.00 - 12.209.50 - 10.109.50 - 10.10

17.10 - 17.309.10 - 9.30

15.30 - 15.5012.40 - 13.0018.10 - 18.3016.10 - 16.3012.40 - 13.0012.20 - 12.4012.40 - 13.0012.20 - 12.4017.30 - 17.5018.10 - 18.309.50 - 10.10

15.50 - 16.1012.00 - 12.209.50 - 10.10

9.50 - 10.108.50 - 9.10

16.50 - 17.1016.10 - 16.3016.50 - 17.1017.10 - 17.3016.30 - 16.5016.30 - 16.5014.50 - 15.1017.50 - 18.1017.10 - 17.3017.30 - 17.5017.30 - 17.50

8.30 - 8.5014.50 - 15.109.50 - 10.10

11.40 - 12.0015.50 - 16.10

9.30 - 9.5011.40 - 12.0012.20 - 12.4016.50 - 17.1016.10 - 16.3015.30 - 15.5011.20 - 11.4017.30 - 17.5015.30 - 15.5017.30 - 17.5017.50 - 18.1012.40 - 13.0016.50 - 17.1015.10 - 15.3017.10 - 17.3015.50 - 16.1016.50 - 17.1011.20 - 11.4012.00 - 12.2012.20 - 12.4011.40 - 12.0012.40 - 13.0017.10 - 17.3015.30 - 15.5017.30 - 17.50

9.10 - 9.3015.50 - 16.1012.00 - 12.20

8.50 - 9.1017.30 - 17.50

15.10 - 15.308.50 - 9.10

15.30 - 15.5011.40 - 12.0017.10 - 17.30

8.50 - 9.1015.10 - 15.3015.30 - 15.5015.50 - 16.1016.10 - 16.3011.40 - 12.0012.00 - 12.2011.20 - 11.4011.40 - 12.0012.00 - 12.2011.20 - 11.4015.30 - 15.5012.00 - 12.2012.00 - 12.2011.20 - 11.4017.10 - 17.3012.20 - 12.4011.20 - 11.4017.50 - 18.1012.40 - 13.0016.50 - 17.10

8.30 - 8.5017.30 - 17.50

Paper ID Name

53 Dr. Woo Chang Su - Korea Institute of Machinery Nano

77 Mr. Vasilakos Sozon - NTUAChemical engineering

129 Mr. Herbreteau Matthieu - LCTSMechanics

135 Dr. Gueorguiev Gueorgui - Linkoping UniversityIFM Depa

146 Prof. Kimura Teruo - Kyoto Institute of TechnologyAdva

160 Prof. Sumin Kim - Soongsil UniversitySchool of Architec

178 Prof. Hussainova Irina, Tallinn University of Techn

180 Dr. Pozzi Angela - A-Technology S.p.A.Design

220 Mr. Sagara Katsuhiro - Chiba universityGraduate school,

306 Mrs. Ponomareva Alina - ETUChair of Microelectronics

342 Dr. Jiratumnukul Nantana - Chulalongkorn UniversityMat

347 Mr. Had Jiri, CTU in Prague

404 Dr. Karabanova Lyudmyla - Institute of Macromolecula

418 Dr. Cammarano Aniello - IMASTTechnological District o

431 Dr. Varshoee Tabrizy Ali - Islamic Azad UniversityWood

432 Khoshgoftar Mohammad Javad Tarbiat Modares Uni

456 Ms. Grayfer Ekaterina - Nikolaev Institute of Inorganic

464 Mr. Razali Mohd Zikri - Universiti Kebangsaan Malaysia

498 Dr. Kim Kyoung Ju - Seoul National UniversityMaterials

509 Mr. P. M Visakh - Mahatma Gandhi UniversityCentre f

579 Prof. Oliet Mercedes - University Complutense of Madr

669 Trusova Marina National Reasearch Tomsk Polytech

670 Yi Jin Woo, Korea Institute of Materials Science(KI

677 Dr. Kim Heesuk - Korea Institute of Science and Techno

689 Prof. Polinga Lady Marianne - University of the Philipp

762 Dr. Noda Junji - Yamaguchi universityMechanical engine

773 Dr. Pana Ioan-Ovidiu - Natl. Inst. for Isotopic and Mol

776 Ms. Osorio Lina - Katholieke Universiteit LeuvenDepart

781 Mrs. Walentowska Judyta - Institute of Natural Fibres

784 Dr. Garcia Martinez Jesus Maria - ICTP/CSICGrupo de In

787 Dr. Batog Jolanta - Institute of Natural Fibres Composi

803 Dr. Garcia Pardo Santiago - University of A CorunaPol

805 Mr. Rajan Rathish - Tampere University of TechnologyLa

878

882 Dr. VARGAS Gustavo - University of the Basque Countr

884 Dr. Pionteck Jürgen - Leibniz Institute of Polymer Re

999 Mr. Shirasu Keiichi - Tohoku UniversityFracture and Relia

1037 Dr. Zicans Janis - Riga Technical UniversityInstitute of

1053 Dr. Ouagne Pierre - Université OrleansLaboratoire P

1065 Ms. Simões Sónia - CEMUCDepartamento de Engenharia

1096 Prof. Jacek Kaczmar - Politechnika WrocławskaMe

1111 Ms. Perinović Sanja - Faculty of chemistry and techno

1160 Dr. Yoo Yoon Jong - Korea Institute of Energy ReseachE

1170 Lin Xiuyi, Hong Kong University of Science and Techno

1206 Mrs. Schulze Karola - DLRInstitut of Materials Research

1334

1355 Lipinska Magdalena Technical University of Lodz

1390 Mr. Hassani Baygi Ali - Imperial College LondonDepartm

1405 Mrs. Schulz Carolin - Technical University Hamburg-Harbu

1435 Dr. Bienias Jaroslaw - Lublin University of TechnologyD

1458 Prof. Cho Donghwan - Kumoh National Institute of Tec

1511 Ms. Farrugia Anais - Institut Clement AderEcole des Mi

1515 Mr. Müller Viktor - Karlruhe Intitute of TechnologyIn

1631 Govorcin Bajsic Emi Faculty of chemical engineeri

1632 Dr. Stefan Maria - National Institute for Research and

1666 Dr. Varga CSilla - University of PannoniaDepartment o

1670 Ms. RABACHE Camille - Ecole Centrale de ParisLaborato

1692 Ms. tabashi sara - Islamic Azad Univ.science and Rese

1712 Ms. Garmaeva Darima - North-Easterm Federal Univers

1725 Mrs. BEN KHLIFA SANA - Ecole Nationale d Ingenieurs d

1745 Dr. Romana Piat - Karlsruhe Institute of TechnologyMec

1760 Prof. Chen Jieng-Chiang - Vanung UniversityGraduate In

1765 Prof. Min Byung-Gil - Kumoh National Institute of Tech

1778 Mrs. Pandele Andreea Madalina - University Politehnic

1833 Mrs. Molins Gemma - Universitat Politecnica de Catalu

Mrs. Ortega Zaida - Universidad de Las Palmas de Gran CanariaIngenierà a de Procesos

Dr. Raimondo Marialuigia - Università di SalernoDipartimento di Ingegneria Industriale

1841 Mrs. Andronescu Corina - University POLITEHNICA of B

1890 Mr. Giang Bach Long - Pukyong National UniversityDep

1904 Prof. MARTINEZ-MATEO ISIDORO - UNIVERSIDAD POLI

1905 Ms. Cruz Santos Joyce Cristina - UFMGMetallurgical an

1921 Dr. Mezghani Khaled - King Fahd University of Petrole

1929 Mr. Dias Gustavo - Universidade Estadual de MaringaDe

1930 Dr. Trapalis Christos - NCSR DemokritosInstitute of Mate

1933 Dr. Dragoi Cristina - National Institute of Materials Phy

1983 Ms. Lombardo Patricia - Universidade de Sao PauloInsti

1997

2003 Mr. IOANNOU IOANNIS - UNIVERSITY OF SHEFFIELDME

2091 Mr. Mosavi Amir - University of Debrecen, Faculty of In

2112 Dr. Amendola Eugenio - CNR-Italy’s National Council

2143 Dr. Yang Zhihua - Harbin Institute of Technology I

2145 Mr. Shengjin Wang - Harbin institute of technologyinsti

2154 Dr. Carvalho Maria Gabriela - UFMGOccupational Thera

2155 Mr. Hasanuzzaman Muhammad - Dublin City University

2181 Dr. Lee Sang-Soo - KISTNanohybrid Research Center

2223 Mr. Sadiq Imran - Beihang UniversityMaterials Science

2225 Dr. Rashkovan Izabella - UVICOM Co.Ltdcomposite mater

2234 Ms. omar Azimah - Universiti Kebangsaan MalaysiaElectri

2294 Mr. Lim Jae Kyoo - CHO-NBUK NATIONAL UNIVERSITY

2296 Ms. Jo Mi-Yeong - Inha UniversityPolymer Science and

2299 Ms. Jo Mi-Yeong - Inha UniversityPolymer Science and

2324 Mr. T Gobi Kannan - Feng Chia UniversityFiber and Com

2335 Ms. Iturrondobeitia Maider - EUITIB, University of Basq

2342 Mrs. Piekarska Klaudia - The Centre of Molecular and M

2353 Mrs. Parveen Shama - University of Minho, Campus de

2365 Mr. Amini Hossein, Islamic Azad University

2397 Prof. YOSHIKAWA MASATAKA - OSAKA DENTAL UNIVER

2404 Dr. Kuscer Danjela - Jožef Stefan InstituteElectronic

2405 Ms. Grala Magdalena - Centre of Molecular and Macromo

2428 Dr. Jerzy Myalski - Silesian University of TechnologyDe

Mr. Silveira Luiz Gustavo - Universidade Estadual de MaringáDepartamento de Fà sica

2471 Prof. Esteves Jose Luis - INEGI-Institute of Mechanica

2504 Prof. Frollini Elisabete - University of Sao PauloMacrom

2505 Prof. Frollini Elisabete - University of Sao PauloMacrom

2514 Dr. Pilan Luisa - University Politehnica of BucharestDE

2518 Mrs. Salasinska Kamila - Warsaw University of Technolo

2525 Mrs. Chabera Paulina - Warsaw University of Technology

2558 Mr. Seo Hyeon Myeong - University of UlsanChemstry

2566 Prof. goulbourne nakhiah - university of michiganaeros

2567 Dr. Hargitai Hajnalka - Széchenyi István University

2570 Mrs. LI WEIKANG - ECOLE CENTRLE DE PARISLaboratoire

46 Prof. Chiang Chin-lung - Hungkuang UniversityDepartme

47 Prof. Hwu Chyanbin - National Cheng Kung UniversityDe

85 Ms. Phulkerd Panitha - Japan Advanced Institute of Sci

86 Prof. Yamaguchi Masayuki - Japan Advanced Institute o

130 Mr. Anakabe Jon - LEARTIKERMaterials dept.

154 Dr. Rodriguez Elena - AIMEN TECHNOLOGY CENTERJOI

166 Mr. Maillet Emmanuel - INSA-LyonMATEIS

183 Mr. Spickenheuer Axel - Leibniz-Institut für Polymerf

200 Dr. Yokota Rikio - Japan Aerospace Exploration AgencyIn

209 Mr. ROUAULT Thomas - Institut Clement AderMSC

227 Dr.Moisés Frías Rojas - Eduardo Torroja Institute (CSI

296 Mr. Voltsihhin Nikolai - Tallinn University of Technolo

299 Mr. Allaer Klaas - Ghent UniversityDepartment of Mater

305 Dr. Lascoup Bertrand - ESTACAStructure and Material L

310 Prof. Zucchelli Andrea - University of BolognaMechanica

319 Ms. Bugris Valeria - University of SzegedDepartment o

353 Ms. Resende Juliana - UniFOAMEMAT

354 Dr. Mulinari Daniella - UERJDME

375 Dr. Kotzev Georgi - Institute of MechanicsPolymer Comp

376 Mrs. Bessard Emeline - Institut Clément AderComposi

377 Dr. Zhou Heng - Institute of Chemistry, Chinese Academ

405 Mr. Zhao Jie - University of TwenteFaculty of Engineeri

411 Mrs. Brunotte Gabriella-Paula - Clausthal University of

430 Dr. Drozd Zdenek - Charles University in Prague, Facul

474 Postnikov Pavel Tomsk polytechnic university

501 Dr. Kromm Francois-Xavier - Université Bordeaux 1I2

504 Ms. Kyung min Oh - University of UlsanChemistry

528 Ms. Han Su Jin - University of UlsanChemistry

529 Mr. Na Wonjin - Seoul National UniversityDepartment o

543 Mr. Bin Bahari Shahril Anuar - Universiti Teknologi M

548 Mr. tableau nicolas - de Technologie de Compiègne

563 Dr. Rudawska Anna - Lublin University of TechnologyDe

568 Mr. Molnar Kolos - Budapest University of Technology

584 Dr. Rentsch Ruediger - IWTManufacturing Technology

599 Dr. Barbero Enrique - University Carlos III of MadridD

640

667 Mr. Kim Hyungmin - Seoul National UniversityDepartmen

695 Ms. Olave Mireia - IKERLAN Mechanical Department

737 Mr. Soni Ganesh - IITB-Monash Research Academy Depa

740 Prof. Yoon Juil - Hansung UniversityMechanical System

767 Dr. Fischer Fabian - Institute for Joining and Welding

771 Mrs. Strojny-Nedza Agata - Institute of Electronic Mate

830 Ms. Berriozabal Edurne - TeknikerTribology unit

906 Dr. Fischer Fabian - Institute for Joining and Welding

961 Mr. MATEOS Modesto - Mondragon UnibertsitateaMechan

966 Mr. Zabala Haritz - Mondragon Goi Eskola Politeknikoa,

994 Mr. Escalé Laurent - Institut Clément AderEcole de

1014 Mrs. Kotelnikova-Weiler Natalia, UR Navier

1085 Mr. Ryo Morinaga - Kyoto institute of technologyAdvan

1091 Dr. Debski Hubert - Lublin University of TechnologyDe

1095 Mr. Patsidis Anastasios - University of PatrasDeparteme

1117 Mr. Tretiakov Mikhail - Perm National Researche Polyte

1119 Prof. Surowska Barbara - Lublin University of Technolo

1126 Mrs. Tretiakova Tatiana - State National Research Poly

1138 Mr. LE GOFF Erwann - I2MIMC

1145 Prof. Borrego Luis - CEMUCMechanical Engineering De

Ms. Munzarová Pavlà na - Technical university of LiberecDepartment of textile materials

1168 Mrs. Abisset Emmanuelle - LMT CachanStructure

1224 Mr. Lobanov Dmitriy - PSTU SNRPUPCenter of Experime

1270 Prof. Oh Tae hwan - Yeungnam UniversityDepartment of

1306 Mr.Thanh Binh Mai, Pukyong National University

1315 Mr. Kadlec Martin - Czech Technical University in Pragu

1341 Prof. Oishi Tsutomu - Yamaguchi UniverityApplied Chem

1381 Prof. Zhang Ya-fang - GuangZhou UniversityCivil En

1397 Mr. Lerpiniere Achille - UR-Navier Ecole des pontsSeine

1426 Prof. Chao Ching-Kong - National Taiwan University of

1438 Mr. NAOKI YAMAMOTO - IHI CorporationResearch Labo

1469 Mr. Sodhani Deepanshu - Institute of Applied Mechanic

1504 Dr. Scheider Ingo - Helmholtz-Zentrum GeesthachtInstit

1544 Ms. Karolina Gaska - AGH University of Science and Tec

1563 Prof. El Fray Miroslawa - West Pomeranian University o

1566 Mr. Pavkovic Krunoslav - Polytechnic of ZagrebDepartme

1634 Ms.Masek Anna, Technical University of Lodz,

1648 Prof.Tong Jingwei, University of Tianjin

1653 Dr. Josep Costa - Universitat de GironaAMADE

1661 Ms. López Laura - University of ZaragozaChemical Engi

1701 Prof. Chan Wen - University of Texas at ArlingtonMech

1794 Mr. Bin Mohamed Rehan Muhammad Saifuddin - ISAT - U

1822 Mrs. Kovalevskaya Olga - Siberian Federal UniversityPoly

1863

1864 Ms. Boyina Dhatreyi - Indian Institute of Technology

1922 Mr. Pastuszak Przemyslaw - Cracow University of Tech

1934 Mr. KOC Murat - Yildiz Technical UniversityMechanical

1937 Ms. Lang Anna - Faserinstitut Bremen e.V.Composite St

1960 Mrs. kavrar deniz - istanbul techical universityfaculty o

1970 Dr. Stübler Nacera - University TU-ClusthalInstitute of

2035 Mr. Santos Alberto - Faculty of Engineering, FEG/UNES

2053 Dr. Ionita Mariana - University Politehnica of Bucharest

2060 Dr. von Bestenbostel Wolfgang - EADSInnovation Works

2123 Mr. Wong King Jye - Universite de BourgogneDeparteme

Mr. Å liseris Janis - Riga Technical UniversityCivil engineering

2151 Mr. Kmetty Ãkos - Budapest University of Technology �

2160 Prof. Sheen Jyh - National Formosa UniversityDepartmen

2200 Mr. Reiter Martin - Johannes Kepler University LinzInst

2232 Dr. Mohammadi Bijan - Iran University of Science and

2334 Dr. Mohammadi Bijan - Iran University of Science and

2339 Dr. Tamas Barany - Budapest University of Technology

2359 Mr. Mohebbi Behzad - Tabriz UniversityMechanical Eng

2438 Dr. KHELLIL KAMEL - Univesity of technology of Comp

2448 Mr. AKHAVAN HAMED - IDMECFaculdade de Engenharia

2490 Mr. Pereira Paulo - UnespMaterials and Technology

2519 Mrs. Auguscik Monika - Warsaw University of Technolog

2534 Prof. Chun Heoung-Jae - Yonsei UniversitySchool of Mec

2542 Ms. BOUTALEB Sabrina - Djillali Liabes University of Sid

2546 Mr. Florio Massimiliano - University of PadovaDepart

2562 Mr. Hensen Guido - DSM Ahead Materials Sciences RChe

2573 Dr. CASALEGNO VALENTINA - POLITECNICO DI TORIN

2575 Dr. Makarenko Irina - Moscow State UniversityFaculty o

2576 Mr. Babkin Alexander - Moscow State Universitychemist

2581 Maragoni Lucio, University of Padova

52 Mrs. Azman Nur Jannah - University Kebangsaan Malaysi

87 Prof. LEE JUNGYOON - Sungkyunkwan UniversityDept. of

89 Mr. Kaina Steffen - TU Dresdenmaterial science

92 Dr. Lee Jung-Moo - Korea Institute of Materials Science

151 Dr. ALMERICH-CHULIA ANA - UNIVERSIDAD POLITECNIC

176 Mr. BabiÄ Matej - Emo-Orodjarna d.o.o./�

219 Prof. Lu Yun - Chiba universityDepartment of mechanica

233 Dr. Ballesteros Yolanda - Universidad Pontificia Comill

254 Prof. Rebillat Francis - University Bordeaux 1Laborato

284 Mr. Jeong Kwang Jin - Changwon National UniversityDe

285 Mr. Caratin Reinaldo - IPEN-CNEN/SPCCN

287 Dr. Cho GueSerb - Korea Institutue of Industrial Techn

325 Prof. bouvet christophe - ISAEDMSM

372 Mr. Sánchez-Heres Luis Felipe - Chalmers University

417 Mr. Aruniit Aare - Tallinn University of TechnologyDep

437 Prof. Silva Joao - ISEPMechanical Engineering

438 Prof. Nunes Joao Pedro - Minho UniversityPolymer Engi

561 Mr. Blom Johan - Vrije Universiteit BrusselMeMC

572 Mr. Moothoo Julien - Laboratoire PRISMEMMH

597 Mr. POUMADERE Thomas - Institut Clément AderMatÃ

607 Dr. Ramos Juan I. - Universidad de MalagaEscuela de Ing

644 Mr. KANAZAWA Kazuya - Doshisha UniversityDepartment

645 Ms. JI Yeongmi - Pohang University of Science and Tec

653 Dr. Lee Sang-Bok - Korea Institute of Materials Scienc

674 Prof. Han Jun Hyun - Chungnam National UniversityDept

679 Dr. Jeong Ha-Guk - Korea Institute of Industrial Techn

755 Mr. Sbarufatti Claudio - Politecnico di MilanoMechanica

817 Dr. Bryantsev Pavel - National University of Science a

863 Mr. Gussone Joachim - German Aerospace CenterInstitu

871 Mr. Suarez Luis - Universidad de Las Palmas de Gran Ca

877 Prof. Iwasaki Atsushi - Gunma UniversityMechanical Sy

898 Mr. Nielsen Michael Wenani - Technical University of

938 Mr. Bilge Kaan - Sabanci University Materials Science

991 Mr. Martin Antoine - Ecole Centrale de NantesGeM

1007 Mr. Arakama Jon Ander - Mondragon UnibertsitateaDepa

1035 Mr. Tena Iosu - Mondragon UnibertsitateaDepartment o

1036 Prof. Cerny Frantisek - Czech Technical University in P

1038 Mr. Orban Richard - Eotvos Lorand UniversityMineralog

1070 Ms. Baser Gulnur - ITU , Institute of Science Polymer Sci

1103 Mr. Maenz Stefan - Friedrich Schiller University JenaIns

1116 Prof. Makhlouf Makhlouf - Worcester Polytechnic Insti

1144

1166 Prof. Toribio Jesus - University of SalamancaMaterials E

1176 Mr. KIM HYUNBUM - Yamaguchi UniversityGraduate Scho

1178 Dr. Takeda Shin-ichi - Japan Aerospace Exploration A

1179 Prof. Krasnikovs Andrejs - Riga Technical UniversityInst

1218 Prof. Tong Lili - Harbin Engineering University Aerospace

Prof. Costa Luàs Cadillon - University of AveiroPhysics

1277 Prof. XU Ying - Harbin Institute of Technology Shenzhe

1298 Mr. Nash Pete - Loughborough UniversityAeronautical

1304 Prof. Kawada Hiroyuki

1319 Ms. CHAPALAIN Flora - IfsttarMACS

1324 Prof. ZAOUTSOS STEFANOS - TECHNOLOGICAL EDUCATI

1345 Mr. Taudt Christopher - University of Applied Sciences

1354 Ms. Zang Lin

1402 Dr. Chluda Cédric - UMONSElectromagnetism

1460 Mr. Batalu Dan - Pollitehnica University of BucharestMa

1543 Mr. Cioffi Salvatore - CNR Institute for Composite and

1546

1585

1595 Figiel Pawel - West Pomeranian University of

1614 Prof. Nikolay Kuznetsov - N,S.Kurnakov Institute of Gen

1617 Dr. BORRIELLO ANNA - National Research Council of Ital

1664 Dr. Giorgini Loris - University of BolognaChimica Industri

1690 Mr. ZHANG Han - Queen Mary, University of LondonScho

1728 Mr. GÃœL Harun - Duzce UniversityMetallurgy

1830 Prof. Ding Yining - Dalian University of Technology Scho

1846 Dr. Bang Hyung-joon - Korea Institute of Energy Resear

1931 Mr. Altinsoy Ibrahim - Sakarya UniversityMetallurgy and

2016 Dr. Zaitsev Alexey - Perm National Research Polytechni

2019 Mr. MOM Sophanarith - DalembertMises

2020 Prof. Guler Mehmet Oguz - Sakarya UniversityEngineering

2022 Dr. van Vuure Aart Willem - KU LeuvenMTM

2039 Dr. Antonucci Vincenza - CNRInstitute for Composite an

2070 Dr. Iovinella Ivano - University of NaplesDepartment of

2071 Mr. Indermuehle Kyle - Dassault Systemes SIMULIAAero

2086 Dr. Blacklock Matthew - University of California, Santa

2099 Mr. Akram Muhammad - Delft University of Technolog

2100 Dr. Iovinella Ivano - University of NaplesDepartment of

2107 Prof. Jacquemin Frédéric - Université de Nan

2115 Dr. Penna Rosa - University of Salerno, Department

Mr. D'Auria Marco - Università degli Studi Federico IIDipartimento di Ingegneria dei Materiali e della Produzione

Mr. DÃ az Enrique - AIMPLASComposites

2126 Dr. Hamza-cherif Sidi Mohammed - University of Tlemc

2187 Dr. Jerabek Michael - Borealis Polyolefine GmbHModelli

2191 Mr. POLAT Riza, Atatürk University

2236 Mr. Chen Cheng - University of Toulouse - ISAEDMSM

2260 Prof. Pinto Nicholas - University of Puerto Rico - Huma

2289 Dr. Górski Radoslaw - Silesian University of Technolo

2291 Mr. Iqbal AKM Asif - Saitama UniversityMechanical Engi

2320 Dr. Kazunori Asano - Kinki UniversityMechanical Engine

2351 Prof. Wang Rong-Min - Norwest Normal UniversityInstit

2358 Dr. Dyzia Maciej - Silesian University of TechnologyFacu

2381 Prof. SHIN Chow-Shing - National Taiwan UniversityDep

2402 Mrs. Ozay Serap - Marmara UniversityChemical Enginne

2414 Dr. Dang Quoc-Khanh - Hanoi University of Science and

2422 Mrs. ESIYOK UKUSER Gokcen - Istanbul Kultur University

2431 Dr. Dolata Anna - Silesian University of TechnologyFacu

2441 Dr. Karamian Ebrahim

2474 Dr. KEE Youngjung, Korea Aerospace Research Insti

2517 Ms. Pietrzak Kamila - Warsaw University of TechnologyF

2532 Prof. Song Kigook - Kyung Hee UniversityMaterials Rese

2545 Dr. Pontefisso Alessandro - University of PadovaDepa

2560 Mr. Tong Yonggang - National University of Defense Te

2563 Dr. SAHU DIPTIRANJAN - University of the Witwatersran

2568 Mr. Mühlstädt Mike - Friedrich-Schiller-UniversitätI

2572 Prof. Salvo Milena - Politecnico di TorinoDepartment o

2580 Santi Matteo, University of Padova

9999 L. Biasetto- University of Padova

493 Lauter Christian University of PaderbornAutomoti

345 Sajjia Mustafa - Dublin City UniversitySchool of Me

722 Prof. SONG Jungil - Changwon National University

754 Ms. Jeongmyeong Byeon - Changwon National Univ

1373 Wu Kuang-Chong - National Taiwan UniversityInsti

Poster Title Day

Durability analysis process for vulcanized rubber component Monday 25th

In-situ monitoring of the curing of polysiloxane/organoclay nanocomposites, Monday 25th

A new push-out procedure for the evaluation of interfacial properties of SiC Monday 25th

NANOSTRUCTURED FLUORO-CARBIDE (CFx) THIN FILMS: DEPOSITION GUIDE Monday 25th

Development of Bio-based Composites from Waste Vegetables Monday 25th

PCM using paraffin/exfoliated graphite composites as energy saving building Monday 25th

Toward high temperature tough ceramics Monday 25th

Mechanical properties of woven natural fiber reinforced composites Monday 25th

Effect of metal composite on properties of Metal/TiO2-x composite thermoel Monday 25th

Fractal analysis of surfaces comprising hierarchical pore structures Monday 25th

PLA-nanocomposite film for packaging applications Monday 25th

Fatigue Properties of the Cell 3D Composite Structure by Tension and Monday 25th

Nanocomposites based on multicomponent polymer matrix and artificial dia Monday 25th

A Study of Adhesion of Silicon Dioxide on Polymeric Substrates Monday 25th

Abstract Title (write here) Monday 25th

Delamination studying in polymer composites reinforced by glass fiber Monday 25th

COMPOSITES BASED ON NANOSIZED HIGHLY EXFOLIATED GRAPHITE Monday 25th

Study the Characteristic of Carbon/TiO2 Nanocomposite for Dye-Sensitized So Monday 25th

Microstructure and Bonding Strength of Carbon Nanotubes Directly Grown o Monday 25th

Elastomeric nanocomposites: Potential of chitin and cellulose nanocrystals a Monday 25th

Study of lignin nanoparticle-reinforced phenolic composite foams formulati Monday 25th

The covalent grafting of organic and biomolecules to carbon surfaces Monday 25th

Cryogenic thermal expansion and mechanical properties of epoxy resi Monday 25th

Facile preparation of polymer-graphite nanosheets composites with high diele Monday 25th

Formation and mechanical characterization of single-layered woven abaca/u Monday 25th

Development and mechanical properties of open-holed CFRP with non-cut fi Monday 25th

Interface charge transfer in polypyrrole coated LSMO magnetic nanoparticle Monday 25th

MICROSTRUCTURAL ANALYSIS AND MECHANICAL BEHAVIOUR OF BAMBOO F Monday 25th

Investigation on microbial resistance of polymer composites containing lignoc Monday 25th

From polymerization wastes to interfacial agents: Atactic polypropylene base Monday 25th

Effect of enzymatic treatment on toxicity of lignocellulosic composites Monday 25th

Relationships between electrical, mechanical properties and morphology of Monday 25th

A Study on Surface Modified Flax Yarn and its Adhesion with Polyhydroxybut Monday 25th

Developments towards a more sustainable rotational moulding process Monday 25th

In-plane shear properties of multiscale hybrid f-MWCNTs / long carbon fibre Monday 25th

Percolation phenomena of modified expanded graphites in TPU and PP comp Monday 25th

Abstract Title (Further development of carbon nanotube/alumina composite Monday 25th

Structure, elastic and electrical properties of polyethylene (PE) / carbon n Monday 25th

Complex shape forming of a new generation of flax woven and non-crimped Monday 25th

CNT-Al Metal Matrix Nanocomposites Monday 25th

Mechanical and Development Properties of Sintered Copper-Alumina Compos Monday 25th

Influence of different processing techniques on the thermal properties of pol Monday 25th

Characteristics of the ceramic sheet hybrid biocomposite Monday 25th

Effects of reduction and size of graphene on mechanical and electrical prope Monday 25th

Properties of thermoplastic Fibre Metal Laminates (FML) Monday 25th

Electrical, and dynamic mechanical properties of MWCNTs/epoxy composite Monday 25th

The properties of butadiene-acrylonitrile rubber NBR filled with modifi Monday 25th

Structural testing and repair procedure of fiberglass composite sections p Monday 25th

On the effect of non-covalent interactions over the dispersion state of ca Monday 25th

The mechanical properties and failure analysis of selected Fibre Metal Lamin Monday 25th

Effect of Electron Beam Irradiation on Properties of Poly(lactic acid) and Ke Monday 25th

Processing glass-ceramic matrix composites by liquid moulding : characterisa Monday 25th

Multiscale modeling of short-fiber reinforced composites in context of large Monday 25th

Effect of filler treatment on the thermal properties of composites an Monday 25th

STUDIES ON MAGNETITE AND SEMICONDUCTORS BASED CORE-SHELL NANOP Monday 25th

Application of carbon nanotubes and newly developed coupling agents in dif Monday 25th

Microstructural and mechanical properties of alumina-based composites (ZTA)Monday 25th

Viscoelastic Properties of Biodegradable Cellulose Diacetate Nanocomposites Monday 25th

Developing of medical materials on the basis of biological polymersAbstract T Monday 25th

THE INFLUENCE OF MORPHOLOGY AND TOPOLOGY OF REINFORCEMENTS ON Monday 25th

Modeling of the elastic response and structural optimization of carbon/car Monday 25th

FABRICAION AND MECHANICAL PROPERTIES OF 3D JUTE FABRICS REINFORC Monday 25th

Preparation and Antibacterial Properties of Organic-Inorganic Polymer Hybr Monday 25th

A Molecular Modelling approach for designing poly(vinyl-alcohol)-Chitosan meMonday 25th

CHICKEN FEATHERS BASED COMPOSITES: A LIFE CYCLE ASSESSMENT Monday 25th

SYNTHESIS OF A NEW BENZOXAZINE MONOMER FOR MMT/POLYBENZOXAZI Monday 25th

A Facile Synthesis and Characterization of PHEMA Anchored Hydroxyapatite HyMonday 25th

Study of the injection flow of glass fiber reinforced PBT and its influence on Monday 25th

Biohybrid Nanocomposites Based on PVA/Carbon Nanotubes Bioconjugated w Monday 25th

Effect of CNT on the Mechanical Properties of Melt Spun PET/CNT Nanocomp Monday 25th

Fast Sintered BiFeO3 Single-Phased Ceramics Monday 25th

Activation of Few Layer Graphene Towards High Surface Area Carbon Based Monday 25th

Multiferroic behavior on symmetric and nonsymmetric heterostructures bas Monday 25th

Photodegradation and Characterization of Poly(ethylene oxide) / Montmorill Monday 25th

HR-TEM investigations in advanced BiFeO3-PbTiO3 multiferroic multifunction Monday 25th

Numerical Characterization of Random Glass Fibre Composite Material Monday 25th

Multiple criteria decision making for material selection of composites; utiliz Monday 25th

Silicone Resins filled with alumina nanoparticles for impregnation of electric Monday 25th

Microstructure and Electroconductivity of TiN-Al2O3 Composites Prep Monday 25th

Effect of h-BN on the mechanical and dielectric properties of porous h-BN/S Monday 25th

NANOMODIFIED MATERIAL TO ORTHESIS MANUFACTURING Monday 25th

Development of Alkali resistant controlled pore Glass Monday 25th

Graphene-wrapped electroconductive hybrid spheres Monday 25th

Estimation of interfacial properties of various carbon fiber epoxy composite Monday 25th

How do nanoparticles influence on physical-mechanical properties of carbon fibers reinforced thermoplMonday 25th

Electron Transport inside Nanoporous ZnO-Based Dye-Sensitized Solar Cell Monday 25th

Study on Corrosion Protection and Conductive Nanocomposite Layers (Epox Monday 25th

Preparation and Applicability of EVOH/TiO2 Nanocomposites Prepared by Si Monday 25th

Morphology and Mechanical Properties of urethane link polydimethylsiloxan Monday 25th

A study on the open hole tension of the unidirectional flax fiber reinforced Monday 25th

RELEVANCE OF PROCESSING PARAMETERS AND STRUCTURE OF LAYERED SILI Monday 25th

Preparation and properties of PLA nanocomposites with inorganic nanofillers Monday 25th

Mechanical Behaviour of Natural Fibre Reinforced Thermoplastic Braided C Monday 25th

The role of silicon doped carbon powder on the formation ß-SiC whis Monday 25th

Hard tissue formation in sponges by bone marrow cells suspended in an algin Monday 25th

Piezeoelctric-polymer composites processed by ink-jet printing technology Monday 25th

Polyolefins - Polyhedral Oligomeric Silsesquioxanes (POSS) Nanocomposites Monday 25th

Microstructure of the magnesium alloy ZRE1-glassy carbon composite interf Monday 25th

Experimental and Numerical Characterization of Composite Materials With Lo Monday 25th

BIOPOLYETHYLENE/CURAUA FIBER COMPOSITES Monday 25th

Composites based on recycled poly (ethylene terephthalate) (PET) and sisal Monday 25th

Supercapacitance of Single-Walled Carbon Nanotube-Polyaniline Composites Monday 25th

Natural fiber composites from polyethylene waste and walnut shell Monday 25th

Effect of the coupling agent on the adhesion of phases in ceramic-elastomer Monday 25th

Functionalized graphene stably dispersible in water and poly(vinyl alcohol) Monday 25th

High Strain Response and Deformation Mechanisms in Kinking Nonlinear Ela Monday 25th

Development of nanoclay reinforced PA6/HDPE nanocomposites Monday 25th

IN-SITU SENSING OF ELASTIC AND PLASTIC DEFORMATION BEHAVIOR IN E Monday 25th

Preparation, thermal stability and flame retardant properties of halogen-fr Tuesday 26th

Fracture Parameters for the Multi-material Interface Corners Tuesday 26th

Mechanical Properties of Injection-Molded Polypropylene with Plywood stru Monday 25th

Novel Material Design of Immiscible Polymer Blends with Localized Distribut Monday 25th

Effects of the processing conditions and maleation on the properties of basal Tuesday 26th

Crack repair of steel vessels with bonded composite patches: damage contro Tuesday 26th

Rupture time prediction of ceramic matrix composites in fatigue using equiva Tuesday 26th

Carbon fiber reinforcement of wooden parts with small cross sections: proce Tuesday 26th

Novel Asymmetric Addition-type Imide Resins for High Temperature Compos Tuesday 26th

A bundle-scale model of propagation of a through-the-thickness notch in a Tuesday 26th

The combined effect of activated paper sludge and fly ash on the ternary ce Tuesday 26th

Optimization of WC-Ni-ZrO2 structure Tuesday 26th

Assessment of the infrared welding process for a carbon fabric reinforced PP Tuesday 26th

Acoustic emission approach to quantify damage evolution Tuesday 26th

LOCALIZATION AND LENGTH ESTIMATION OF DELAMINATION IN COMPOSIT Tuesday 26th

Polyacrylate-CaFe layered double hydroxide nanocomposites - structural charaTuesday 26th

Morphological and Mechanical Properties of Pineapple-Glass Fibres/ PP Com Tuesday 26th

Mechanical Behavior of Hybrid Composites with Synthetic and Natural Fibres Tuesday 26th

ELECTRICAL PROPERTIES OF FOAMED POLYPROPYLENE/CARBON BLACK COM Tuesday 26th

Modelling of Isothermal and anisothermal crystallization of PEEK matrix and Tuesday 26th

Study on one Phthalonitrile resin system suitable for RTM process Tuesday 26th

Development of a high performance composite with benzoxazine/phenolic b Tuesday 26th

Synthesis and Processing of Soft Magnetic Thermoplast-Nano@Micropartic Tuesday 26th

Temperature Deformation of the AX41 Saffil Fibre Composites studied by t Tuesday 26th

The new method of covalent grafting of organic fynctional groups on Tuesday 26th

Manufacturing process and characterisation of C/C large diameter filament Tuesday 26th

Graphene modified by alcohols and their nanocomposites of shape memory Tuesday 26th

Shape memory polyurethane nanocomposites of functionalized graphene sh Tuesday 26th

In-situ Damage Monitoring of Textile Composites Using X-ray Computer To Tuesday 26th

Hardness and Frictional Resistivity of Cocopeat (Cocos Nucifera)-Polymer Co Tuesday 26th

Contribution to the experimental measurement of in plane and out of plane Tuesday 26th

The bonded joints strength of aramid/epoxy and graphitic/epoxy composites Tuesday 26th

Development of continuous electrospun precursors for carbon fiber manufac Tuesday 26th

Surface integrity of machined CFRP structures Tuesday 26th

Influence of out-of-plane stresses on failure prediction of composite bolted j Tuesday 26th

Composite materials with different fibers and matrixs Tuesday 26th

Enhanced thermally conductive composites based on polyphenylene sulfide, Tuesday 26th

Modeling of nesting effect on the delaminated surface for woven structures Tuesday 26th

Prediction of composite laminate failure via a Multilayered Representative Tuesday 26th

Evaluation of the effective thermal Properties of Metal-Matrix Composites by Tuesday 26th

Pre-treatment of CFRP for adhesive bonding using laser radiation Tuesday 26th

Abstract TiThe relationship between obtaining technique and morphology of i Tuesday 26th

CHARACTERIZATION OF PTFE COMPOSITES THROUGH THE STUDY OF DESORB Tuesday 26th

Investigation of behavior of butt-jointed composite sandwich structures unde Tuesday 26th

HYSTERETIC BEHAVIOUR OF FIBRE-REINFORCED COMPOSITES Tuesday 26th

Effects of the velocity in the delamination of carbon-epoxy plates subjected Tuesday 26th

Comparison of the impact resistance of carbon/epoxy and carbon/PEEK comp Tuesday 26th

Kinetic of fiber ruptures in a unidirectional composite with a viscoelas Tuesday 26th

Desgin of Braided fabrics considering internal structure Tuesday 26th

BUCKLING AND POSTBUCKLING NUMERICAL ANALYSIS OF THIN-WALLED CO Tuesday 26th

Conductivity and Dielectric Response in Poly(ethylene oxide) – Mo Tuesday 26th

The postcritical deformation stage and non-local failure conditions Tuesday 26th

Fatigue of unidirectional carbon fiber reinforced epoxy composites Tuesday 26th

Experimental investigation of space-time inhomogeneity at elasto-plastic and Tuesday 26th

Bushing hole reinforcement on joined composite structural part using expa Tuesday 26th

ASSESSMENT OF THE FATIGUE BEHAVIOUR ON NANOFILLED EPOXY COMPOSI Tuesday 26th

On the intra/interlaminar coupling of laminated composites Tuesday 26th

Deformation and fracture of fibrous polymer composites in thermo-mechanic Tuesday 26th

Preaparation of Syndiotactic Poly(vinyl alcohol) Nanocomposite with Zirconi Tuesday 26th

CHEMICAL MODIFICATION OF Al2O3 NANOPARTICLES BY PMMA VIA A Tuesday 26th

Fractographic analysis of the interlaminar shear failure in a carbon fibre- Tuesday 26th

Synthesis and Characterization of Polymer Composite from ABS Resin and Mo Tuesday 26th

Numerical Study on Single Fiber Pull-out Test for Fiber Reinforced Co Tuesday 26th

2D-Modelling of delamination in impacted multi-layer plates Tuesday 26th

Thermal stresses in a nonuniformly coated circular inclusion Tuesday 26th

Prediction of Mode-I Delamination Growth for the Multidirectional Laminate Tuesday 26th

Finite element modeling of filler reinforced polymers Tuesday 26th

Size effect in the damage behaviour of short fibre reinforced composites Tuesday 26th

A study of thermal conductivity of boron-nitride epoxy-matrix composites. Tuesday 26th

Mechanical hysteresis loop method for creep assessment of elastomeric na Tuesday 26th

LOCALY REINFORCED LAMINATED TIMBER WITH GLASS FIBER GLUED-IN BET Tuesday 26th

Influence of flavonoids and aminoacids on the stabilization of polymer Tuesday 26th

APPLICATION OF CARRIER-ESPI FOR MEASUREMENT OF OUT OF PLAN Tuesday 26th

Study of adherent conditioning on the fracture toughness of bonded joints f Tuesday 26th

PCL/MCM-41 nanocomposites prepared by “in situ†polymer� Tuesday 26th

Modeling for Composite Structures by Finite Element Method Tuesday 26th

Effects of fiber orientation on the mode I crack propagation in a multidirect Tuesday 26th

POLYMER COMPOSITE MATERIALS BASED ON ULTRA HIGH MOLECULAR WEIG Tuesday 26th

A new design method of orthotropic flexural plate with variable in-plane stif Tuesday 26th

Suitability of cruciform specimens for characterizing bi-axial behaviour of c Tuesday 26th

PREDICTION OF SUBSURFACE DEFECTS THROUGH A PULSE THRMOGRAPHY; Tuesday 26th

FAILURE BEHAVIOR OF FIBER REINFORCED LAMINATED COMPOSITE PLATES Tuesday 26th

Experimental Investigation of Fibre Pretension on Miniaturised Loop Connect Tuesday 26th

Production and Mechanical Testing of an Unmanned Helicopter Tail Cone Tuesday 26th

Abstract Title (Electrical and mechanical properties of graphite-based polym Tuesday 26th

Production of Thermoplastic Composites from Carbon Fibers Treated by Diele Tuesday 26th

Well-dispersed single-walled carbon nanotube/ polypyrrole composite films: Tuesday 26th

Fatigue crack growth and reinforcement structure Tuesday 26th

NUMERICAL SIMULATION OF MODE I DELAMINATION BEHAVIOUR OF MULTID Tuesday 26th

Tensile and flexural creep behavior of self-reinforced polypropylene compo Tuesday 26th

Microwave Measurements of Dielectric Constants From Composite Samples Tuesday 26th

Micromechanical simulation of the failure behavior of short fiber reinforced Tuesday 26th

Edge Delamination Prediction in Laminated Composite Materials Based on E Tuesday 26th

Effects of Edge Delamination Onset and Growth on the Post Buckling Behav Tuesday 26th

Fracture and failure behavior of self-reinforced poly(ethylene terephthalate) Tuesday 26th

Delamination Detection in Composite Beam Using Modified AIS Algorithm Tuesday 26th

Mechanical behavior of stiffened panel composite loaded in four-point bend Tuesday 26th

Large deflection and stresses in the variable stiffness composite laminate Tuesday 26th

AbstractPreparation and characterization mechanical and thermal properties Tuesday 26th

MATRIX SELECTION FOR UREURETHANE/BIOGLASS COMPOSITES IN SCAFFO Tuesday 26th

Study of determine design variable with loading condition for composite lam Tuesday 26th

Composite materials containing biodegradable polymers - Rheological BehavioTuesday 26th

Mixed mode fracture and notch thougness of claymodified epoxy resin Tuesday 26th

New high performance unsaturated polyester resins Tuesday 26th

Pressure-less joining of ceramic matrix composites Tuesday 26th

SIMULATION OF THERMOPHYSICAL PROCESSES IN COMPOSITE PRODUCTION Tuesday 26th

MECHANICAL PROPERTIES OF SILTEM MODIFIED BISMALEIMIDE RESINS Tuesday 26th

Influence of the stress ratio on the multiaxial fatigue behaviour of gla Tuesday 26th

Preparation of Bi(Pb)-Sr-Ca-Cu-O Superconductor with Nano Co3O4 Addition Wednesday 27th

Bond Behavior of GFRP Bars Embedded in Fiber Reinforced Concrete Wednesday 27th

Textile based metal sandwiches and metal-matrix-composites reinforced with Wednesday 27th

Fabrication of in-situ Al/TiC composites in liquid aluminum by thermally act Wednesday 27th

NEW GFRP BARS AS INTERNAL REINFORCEMENT IN CONCRETE STRUCTURES Wednesday 27th

Fractal dimension nanostructure of point robot laser hardened materials G Wednesday 27th

Fabrication and photocatalytic activity of TiO2 composite photocatalyst thi Wednesday 27th

Application of acoustic NDT method to detect damage on composite structu Wednesday 27th

Introduction of rare earth elements to replace silicon in the usual composit Wednesday 27th

Synthesis and Characterization of Tb doped SiO2 Thin Film by Sol-Gel Proces Wednesday 27th

Analysis of fiber-concrete interface in cement matrix composites Wednesday 27th

Fabrication of CNT-reinforced Aluminum Matrix Composite Rod by HydrostatWednesday 27th

Abstract Title (write here) Wednesday 27th

Effects of matrix cracking on the safety of fibre reinforced composites struct Wednesday 27th

Chemical resistance factors of particulate filled polymer composite Wednesday 27th

Filament wound products made with thermoplastic matrix towpregs Wednesday 27th

Processing of continuous fibre reinforced thermoplastics Wednesday 27th

DETERMINATION OF MATERIAL PARAMETERS OF A TEXTILE REINFORCED CE Wednesday 27th

Impact of uptake behaviour on tensile properties of flax fibre reinforced co Wednesday 27th

Influence of manufacturing process on mechanical properties of discontinu Wednesday 27th

Drawing of compound polymeric fibers Wednesday 27th

Formability Evaluation of Non-Crimp Carbon Fabrics Wednesday 27th

Abstract Title (Effect of bonding geometry on strength of adhesive joint for Wednesday 27th

FABRICATION OF NANO CABONS REINFORCED METAL MATRIX COMPOSITES BWednesday 27th

Wear characterization of CNF/Al composites fabricated by liquid processing Wednesday 27th

Growth Behavior of Cu/Al Intermetallic Compounds by a Multi-pass of HydrosWednesday 27th

SHM application on sandwich panels with Nomex honeycomb core and aluminiWednesday 27th

Formation of microstructure of Al-Cu-Fe alloy with quasicrystalline phases d Wednesday 27th

Tensile properties and microstructure of SiC fibre reinforced multi metal ma Wednesday 27th

Use of banana fibre in injection – moulded parts for the automotive Wednesday 27th

Estimation of the probability of critical damage using bayesian theorem at t Wednesday 27th

Experimental determination and numerical modelling of process induced straiWednesday 27th

Effect of TEX on the strength and failure envelopes for non-crimp glass fiber Wednesday 27th

Thermoplastic composite shock absorber simulation Wednesday 27th

Effects of the configuration of the SMA based FML on morphing behaviour Wednesday 27th

Effect of thickness on the interfacial strength of layer by layer in situ UV curi Wednesday 27th

Thin film carbon and nitrogen based nanocomposites on Ti6Al4V alloy Wednesday 27th

Preparation and characterization of an aluminum diboride – alumi Wednesday 27th

Investigation of the strength and failure envelopes of non-crimp glass fiber Wednesday 27th

Microwave Curing of RTM Produced Polymer Matrix Composites Wednesday 27th

In-situ Manufacturing of Aluminum-Aluminum Nitride Castable NanocomposiWednesday 27th

Dielectric properties of carbon black copolymer Wednesday 27th

INFLUENCE OF REINFORCEMENT GEOMETRY ON THE ELASTIC BEHAVIOUR OFWednesday 27th

A new method for continuous production of ramie yarn reinforced compositeWednesday 27th

Influence of absorbed water in CFRP laminates on embedded FBG sensors Wednesday 27th

PULL-OUT MICRO-MECHANISM FOR FIBERS IN CONCRETE Wednesday 27th

Computational fluid dynamics simulation for wind pressure of composite radoWednesday 27th

3D Delamination patch detection in laminate composites with an novel NDE Wednesday 27th

Investigation of in-plane compressive behaviour in unsymmetrical composi Wednesday 27th

Off-Axis Properties of Woven GFRP under Constant Tensile Load in H

Flexural behavior of smart composite materials - Effects on FBGs signalsGs Wednesday 27th

Durability Analysis of MWNT Nanocomposites through Dynamic Mechanical Wednesday 27th

Interlaminar photoelastic health monitoring of adhesive joints and composit Wednesday 27th

Microwave-assisted Homopolymerization of Epoxy Resins and their th

Temperature and strain effects discrimination into composite materials with Wednesday 27th

Influence of addition powders with different morphology to MgB2 supercon Wednesday 27th

Polyester based nanocomposites as matrix for lightweight reinforced composWednesday 27th

Improving Micro-CT accuracy on feature extraction through image upscaling Wednesday 27th

Microwave curing of long fibre reinforced composited in an open antenna sy Wednesday 27th

SYNTHESIS OF CERAMICS BY SOL - GEL METHOD IN MOLYBDENUM, S

SYNTHESIS OF FINE-DISPERSED YTTRIUM-ALUMINUM GARNET Al5Y3O12 VIA Wednesday 27th

Fireproof Silicone sealants for shipbuilding Wednesday 27th

Thick carbon fibre reinforced composite materials: investigation of an industrWednesday 27th

Damage Sensing in Carbon Fibre Composites using Carbon Nanotube NetworksWednesday 27th

Reciprocating sliding speed effect on the tribological properties of SiCp rei Wednesday 27th

Triphasic electric conductive materials for detection of the damage and cra Wednesday 27th

Shape Estimation and Health Monitoring of Composite Wind Turbine Blade UWednesday 27th

Effect of Copper Particle Size on Properties of Cu-Al2O3 Composites Wednesday 27th

Probabilistic methods for the analysis of random stress and strain fields in Wednesday 27th

Non linear micromechanical modelling of hemp concretes Wednesday 27th

Nano Crystalline ZnO Thin Films Reinforced With MWCNT Based Buckypapers aWednesday 27th

On the potential of fine steel fibres to create stiff but tough polymer compos Wednesday 27th

A new vacuum Infusion technology: Pulse Infusion Wednesday 27th

Experimental Campaign on Masonry Panel Strengthened by FRG Wednesday 27th

ADVANCED OPTIMIZATION OF COMPOSITE STRUCTURES INCORPORATING STRWednesday 27th

The Virtual Test Pipeline - Characterisation, Generation and Simulation of Wednesday 27th

Durability of Polyimide to titanium bonds Wednesday 27th

Retrofit of concrete columns Wednesday 27th

INTERNAL STRAIN MEASUREMENT OF GLASS-POLYESTER COMPOSITES UNDERWednesday 27th

PRELIMINARY RESULTS OF AN EXPERIMENTAL AND COMPUTATIONAL

Wednesday 27th

Wednesday 27th

Wednesday 27th

Wednesday 27th

Abstract Title (thermally induced vibration of composite flexible solar panels oWednesday 27th

Characterization of short fiber reinforced polypropylene composites Wednesday 27th

Steel Fibers Effect in Bending and Compressive Strength Enhanceme

A NUMERICAL APPROACH FOR ANALYZING POST-IMPACT BEHAVIOR OF COMWednesday 27th

Composite nanofibers of electroactive polymers prepared via electrospinnin Wednesday 27th

Analysis of composites with rigid reinforcements by the boundary element Wednesday 27th

Effect of Hybrid Reinforcement on Crack Initiation and Propagation Mechani Wednesday 27th

Turning machinability of short potassium titanate fiber reinforced aluminum Wednesday 27th

Polymer modified Loess with in-situ polymerization for removing cation dyes Wednesday 27th

Selection of parameters of the manufacturing process of composites AlMMC Wednesday 27th

Integrity monitoring of composite patch repairs using Fiber Bragg Grating Se Wednesday 27th

Preparation of organically modified CaCO3 and its use in the manufacture o Wednesday 27th

Consolidation and properties of Cu-TiC composite by reduction sintering and Wednesday 27th

PREPARATION OF CROSSLINKED POLYVINYLPYRROLIDONE NANOCOMPOSITES Wednesday 27th

Effect of selected casting methods on microstructural characteristic of part Wednesday 27th

The effect of parameters on physical and strength properties of comp

Resonant Fatigue Testing of Full-Scale Compoiste Helicopter Rotor Bl

Polyurethane composites with the addition of graphite with different expans Wednesday 27th

Nano-scale Patterning of Composite Resins Using UV Imprinting Technique Wednesday 27th

Application of the Voronoi cell concept to assess agglomeration effects on Wednesday 27th

A low cost fabrication route for continuous carbon fiber reinforced ZrC-bas Wednesday 27th

Sintering and dielectric studies of Ti doped Al-Zr Oxide Composites Wednesday 27th

Laminate Characterization of Fiber-Reinforced Polymer Composites by Mic Wednesday 27th

INNVIN - Innovative materials solutions for Transport, Energy and Biomedic Wednesday 27th

Fracture thoughness of nanomodified epoxy resins and glass reinforc

PRELIMINARY INVESTIGATIONS ON THE USE OF PRECERAMIC POLYM

Crash tests of hybrid structures consisting of sheet metal and local C

Heat treatment of cobalt ferrite prepared by the sol-gel method

Finite element prediction of mechanical properties of plain weave c Tuesday 26th

Mechanical Behaviors of Jute/Hemp Fibers Reinforced Polypropylene Tuesday 26th

Diffraction of A Plane Stress Wave by A Propagating Semi-Infinite Cra Tuesday 26th

Wednesday 27th

Wednesday 27th

Wednesday 27th

Wednesday 27th

Wednesday 27th

Wednesday 27th

Wednesday 27th