HOLY MARY INSTITUTE OF TECHNOLOGY

(COLLEGE OF ENGINEERING)

Bogaram(v),Keesara(M),RR.Dist-501301

DEPARTMENT OF MECHANICAL ENGINEERING

TEACHING SCHEDULE

Faculty : V.Sandeepa Designation : Asst ProfessorClass : I B.Tech Subject : Engineering Graphics.

Unit No. Name of the Topic

No.of Periods required

Total Periods / Unit

No.of Periods-available

Action Plan for backlogs

I

INTRODUCTION TO ENGINEERING DRAWING :

1

21 120

3 Extra periods

per week from

4.00 PM to4.50 PM

Principles of Engineering Graphics and their Significance

1

Drawing Instruments and their Use

1

Conventions in Drawing – Lettering – BIS Conventions.

3

Curves used in Engineering Practice & their Constructions

3

Conic Sections including the Rectangular Hyperbola – General method only

3

Cycloid, Epicycloid and Hypocycloid

3

Involute. 3Scales: Different types of Scales, Plain scales comparative scales, scales of chords

3

II

DRAWING OF PROJECTIONS OR VIEWS ORTHOGRAPHIC PROJECTION IN FIRST ANGLEPROJECTION

2

11 99

3 Extra periods

per week from

4.00 PM to4.50 PM

Principles of Orthographic Projections

3

Conventions – First and Third Angle

3

Projections ofPoints and Lines inclined to both planes True lengths, traces.

3

III PROJECTIONS OF PLANES & SOLIDS:

2 11 88 2 Extra periods

per week from

4.00 PM to4.50 PM

Projections of regular Planes, 3auxiliary planes and Auxiliaryprojection inclined to both planes

3

Projections of Regular Solids inclined to both planes – Auxiliary Views.

3

IV

SECTIONS AND SECTIONAL VIEWS:-

2

23 77

Right Regular Solids 3Prism, Cylinder, Pyramid, Cone 3Auxiliary views. 3DEVELOPMENT AND INTERPENETRATION OF SOLIDS:

3

Development of Surfaces of Right

3

Regular Solids – Prisms, Cylinder, Pyramid Cone and their parts

3

Interpenetration of Right Regular Solids

3

V

INTERSECTION OF SOLIDS:- 3

12 54Intersection of Cylinder Vs Cylinder

3

Cylinder Vs Prism, 3Cylinder Vs Cone. 3

VI

ISOMETRIC PROJECTIONS 3

21 42

Principles of Isometric Projection

3

Isometric Scale – Isometric Views

3

Conventions – Isometric Views of Lines

3

Plane Figures, Simple and Compound Solids

3

Isometric Projection of objects having non- isometric lines

3

Isometric Projection of Spherical Parts.

3

VII

TRANSFORMATION OF ROJECTIONS

3

9 21Conversion of Isometric Views to Orthographic Views

3

Conventions. 3

VIII

PERSPECTIVE PROJECTIONS 3

12 Nil

Perspective View : Points, Lines, Plane Figures

3

Perspective View : Simple Solids,

3

Vanishing Point Methods (General Method only).

3

Signature of Faculty Signature of HOD Signature of Principal