The Next Level of Technology

ITW Dynatec and Extrusion Dies Industries, LLC (EDI) provide a turnkey coating and laminating system with guaranteed application performance resulting in faster production speeds and reduced adhesive usage. This highly-accurate and reliable system prevents streaking, permits ultra-thin coatings and maintains a coat weight accuracy of 1%.

Precision Coating & Laminating System

Turnkey Coating and Laminating System:

• Web widths available from 61cm (24in) to 457cm (180in)• Coat weights from .5 to 100 Mils with accuracies down to 1%• Compatible with a wide variety of adhesives including: PSA, APAO, EVA, PUR, and Polyamides.• Continuous or intermittent application speeds up to 610 MPM (2000 FPM) • Viscosity range from 100cps to 120,000cps• Temperature range from ambient to 260°C (500°F)

Adhesive Supply Unit

Heated Hoses

Coating Module

• Melts and conditions the polymer• Filters the polymer• Precision pumps the polymer• PLC based control system for complete

process control

• Built-in downtime prevention • Maintains polymer temperature from the adhesive supply unit to the die

• Robust design maintains repeatability• Precision fine adjustment for die accuracy• Accurate temperature controlled backing roll(s)

Shown: ITW Dynatec High-Volume Supply Unit and EDI Die Coating Station

T h e D y n a t e c D i f f e r e n c e . . .

Closed Loop Process ControlsITW Dynatec and EDI know that consistent quality requires repeatable process and have achieved that in their turn-key coating system. The two most critical controls to maintainduring coating are temperature and pressure. These attributes are monitored and automatically adjusted for with the Dynatec/EDI system to make sure that you get the repeatable process that will deliver consistent quality every single time.

Coating Die• Maintains fluid temperature• Uniformly distributes the fluid• Maintains accurate coat weight• Accurately defines coat width

ASIAITW Dynatec Hong KongUnit A-B, 11/Fl., LeahanderCentre 28Wang Wo Tsai StreetTsuen Wan NT Hong Kong

AMERICASITW Dynatec31 Volunteer DriveHendersonville, TN 37075Telephone 615•824•3634+1.800.860.6150Fax +1.615.264.5248dynatec@itwdynatec.com

JAPANITW Dynatec K.K.Tsukimura Building 5th Floor26-11, Nishikamata 7-chomeOta-ku, Tokyo 144-0051, JapanTelephone +81.3.5703.5501Fax +81.3.5703.5505info@itwdynatec.co.jp

EUROPE, AFRICA andMIDDLE EASTITW Dynatec GmbHIndustriestrasse 28D-40822 Mettmann, GermanyTelephone +49.210.4915.0Fax +49.210.491.5111e.mail@itwdynatec.de

Visit us at www.itwdynatec.com

® 12/2010 ITW DynatecITW Dynatec reserves the right to discontinue or change specifications, designs, materials and equipment without notice or obligation.

Alternative Large Adhesive Melters

High-Volume Adhesive Supply Equipment Bulk Adhesive Supply Equipment

Precision Coating & Laminating System

DM55 DynaDrum™The air-operated DM55 DynaDrum™ bulk adhesive melter is a stationary drum unloader that combines a heated platen, pump and all controls needed to melt and dispense hot melt adhesives, sealants or coatings.The DM55 is well suited for coating and laminating applications where high adhesive volumes are required.

Dynamelt™ M Series

ITW Dynatec’s high-volume adhesive supply units (ASU) are PLC-based hot melt supply units. The control panels provide comparative data of all set points, motors, etc. on a few convenient, comprehensive display screens. High-volume melters feature patented no-char, Melt-On-Demand™ system to provide consistent and reliable adhesive supply to your coating and/or laminating applications.

• High-speed coating and laminating stations up to 2,500 FPM• Materials up to 51cm (20in) wide• 7.6cm (3in) diameter cores / 76cm (30in) diameter rolls

Proof of Process Capabilities/Equipment

• High-speed video• Instron® measurement and testing equipment