Upload
daniel-maft
View
215
Download
0
Embed Size (px)
Citation preview
7/29/2019 Edges information
1/130
for
mm 1 2 3 1 2 3 2 2 3 2 mm mm
Recommended standard edge designs and grid dimensions
GK straight edge on all sides 1 00/00for screw mounting 3 1200/00
AK-00 bevelled on long sides ( mm bevel) 00/00, 2/2for screw mounting 3 1200/00, 120/2
AK-01 bevelled on all sides ( mm bevel) 00/00, 2/2for screw mounting 1200/00, 120/2
SK-0*) straight edges only for visible T-section 1 00/00, 2/2undercut as of 3 mm thickness
22 1200/00, 120/2
SK-0 straight on the long side, front side with 20, bevelled edges for Omega section ( mm bevel)
202
Special Designs
AK-02 shiplap on all sides 3 00/00, 1200/00
for screw mounting 2/2, 120/2
AK-03 shiplap on all sides with mm bevel 00/00, 1200/00for screw mounting 2/2, 120/2
SK-0 shiplap on all sides for visible T-section 2 00/00, 1200/00
22/2, 120/2
SK-0 shiplap on all sides with mm bevel 2 00/00, 1200/00for T-section
22/2, 120/2
VK-0**) concealed T-section for push-in mounting panels 3 00/00, 2/2 grooved and bevelled on all sides ( mm bevel)
31200/00, 120/2
VK-10**) concealed T-section panels can be disassembled 2 00/00 panels grooved and bevelled on all sides.
33 1200/00
VK-12 shiplap all round on alternating sides 2 110/0
with mm bevel. 3 120/1
System Edges
SY-01 straight edges on all sides, grooved on the long sides, 00/00 undercut on the cross sides for modo ceiling system 1200/00
SY-02 grooved on the long sides, bevelled on all sides 3 00/00, 2/2 for Heradesign retaining claw 1200/00, 120/2
The Heradesign decorative panels can be equipped with
various edge designs in order to match the architecturalconcept and the planned method of installation.
As a result, Heradesign decorative panels can be used
for almost all commercially available hanging systemsand installation methods.
Please note:
***) Heradesignplano: : Panel thickness only 2 mm, max. width 00 mm; for edge VK-0: bevel only 3 mm
Heradesign fine/A2: Panel thickness only 2 mm, max. width 00 mm
Attention:*) Heradesign fine and Heradesignsuperfine are only available in the format 00/00 or alternatively 2/2 for a thickness of 1 mm and edge SK-0.
**) Custom formats only on request length 100 mm (contact technical customer service)
1 The straight edge is not an exposed edge. Straight edge only produced at theexpress request of the customer.
2 The billing dimensions or alternatively the ordering dimensions are always the
grid dimensions.3 Installation pattern in cross joints requires very careful installation, because four
visible panel edges have to meet at one point.
Heradesignsuperfine
Abbreviation
Design
Heradesignfine
Heradesignfine/A2***)
Heradesignmicro
Heradesignplano***)
Recommended
profilewidth
References
Grid
dimensions2)3)
Paneldimensions
00/001200/00
00/00, 2/21200/00, 120/2
00/00, 2/21200/00, 120/2
/, 1/111/, 12/1
/00, 20/2/1200, 20/120
00/00, 1200/00
2/2, 120/2
00/00, 1200/002/2, 120/2
/, 1/111/, 12/1
/, 1/111/, 12/1
00/00, 2/21200/00, 120/2
1/001/1200
1200/00
120/2
/001200/
00/00, 2/21200/00, 120/2
Edge Designs for 1-Layer Decorative Panels
Product Details: Trend Product Line
More extensive detailed information and drawings can be found on our website www.heradesign.at or local Heradesign websites.