Upload
others
View
15
Download
0
Embed Size (px)
Citation preview
Training & Certification Course in
EMINENT NDT SERVICES PRIVATE LIMITEDNo. 10, 2nd Cross street, Kalaimagal Nagar,Ekkattuthangal, Chennai -600032,IndiaTel: 91-4443536117, 9500062099, [email protected]
15th - 20th December 2014
By the Eminent in NDT Dr O Prabhakar-OP Techs R.Balakrishnan- Manager/CQ/BHEL (Retd)C.Balamurugan
(As per ASNT- Practice SNT - TC-1A 2006)EDDY CURRENT TESTING - Level II
ddy current is currently widely used to inspect Ethe ferrous and non-ferrous steel materials like Stainless steel, Brass & Aluminum.
Eddy currents (Electromagnetic testing) are generated in a conductive material by a changing magnetic field. The strength of these eddy currents can be measured. Material defects cause interruptions in the flow of the eddy currents which alert the inspector to the presence of a defect.
Eddy currents are also affected by the electrical conductivity and magnetic permeability of a material, which makes it possible to sort some materials based on these properties.
Eddy current testing is utilized to
lDetermine general tube integrity
lDetect tube OD problems
lDetect tube ID problems
lDetect water treatment problems Detect water flow problems
lDetect machine vibration problems Detect tube manufacturing problems
Benefits in Eddy Current Testing
lAssessment of residual life of the tubes
lAvoid unnecessary shutdown due to tube leakage in condenser
l100% Quality Testing with Repeatability.
lBest method for sorting of components, When compare to other Existing Method
lMaterials sorter for Ferrous and Non Ferrous
lThis testing is used for sorting Mixup Materials at any stages for finished components like Bars, Fasteners, Pins, Bushes, etc
The subjects to be taught
lBasic of eddy current testing
lgeneration of eddy current
lTypes of probe
lTest methods
lInstrument handling
lInspection procedure
lTypes of detection by eddy current testing
ltesting procedure
lselection of technique
lselection of probe
lcalibration standards
ET level 2 Practical Training
Equipments familiarization + Methodology of Testing Materials with calibration standards, evaluation and recording of signal and strip chart.
The adequate ET equipments with accessories and test specimen would be provided to the participants for both the practical and Examination.A Fee Discount of 10% is applicable to the participants who spare the required ET equipments for our Training & Examination.
The BENEFICIARIES
The NDT Technicians & executives who are working in Industries, Air Services, Ships, Pipe& Tube Manufacturers, Defence, Public Works, Railways, Roads & Buildings, Power, Irrigation, Oil & Gas Sector
Engineering Faculty, Students and Research Scholars would also find the course highly beneficial.
PROGRAMME VENUE:
Dates : 15th - 20th December 2014 Timings : 9.00 to 1800 Hrs in all training Days: 15th to 19th December 2014-Theory & Practical Sessions: 20th Dec 2014-Examination
On the first day Registration will commence at 0830 hrs. On all other days the programme timings will be from 0900 - 1800 hrs with breaks in between for tea and lunch.
COURSE DIRECTOR
C.Balamurugan, M.Tech (NDT) –ASNT NDT Level –III (RT,UT,MT & PT) - Radiation Safety Officer (RSO) - ISO 9001: 2008 Auditor / Lead Auditor
Chief Executive- (Technical & Business Development) of Eminent NDT Services Private Limited, Chennai.
Address For CommunicationEMINENT NDT SERVICES PRIVATE LIMITEDNo 10,2ND Cross street,Kalaimagal Nagar,
Ekkattuthangal,Chennai -600032,IndiaTel: 91-4443536117, 9500062099
Dr.O.PRABHAKAR –OP Techs
He worked as a Professor at the Indian Institute of Technology, Chennai in the D e p a r t m e n t o f M e t a l l u r g i c a l Engineering. He was also the Head of the Department for three years from 1987 to 1990. Subsequently he took voluntary
R. BALAKRISHNAN M.Sc (Physics)
He is now serving as a Guest faculty At Anna University, Guindy, Chennai since Aug 2013 and handling classes for B.Tech -Material Science, B.E-Mechanical Engineering and M.E-Manufacturing Engineering students.
COURSE PERFORMERS
retirement from the Indian Institute of Technology in the year 1998 after teaching and doing research in the areas of nondestructive evaluation and metal casting for nearly 30 years and later he taught at the Nanyang Technological University, Singapore from 1998 to 2004.
Presently he is stationed in Chennai and is working as a consultant to M/S Sundaram Brake Lining, Chennai and a few steel foundries. He has published multimedia educational CDs and conducts Level III orientation courses.
Dr. O. Prabhakar obtained his B.Tech and Ph.D in Metallurgy from the Indian Institute of Technology, Chennai and M.E in Mechanical Engineering from Indian Institute of Science, Bangalore. His primary areas of interests are nondestructive evaluation and metal casting.
He retired as Manager in Corporate Quality-Chennai in Feb 2013. He has 34 years of field experience in NDT & Quality Audit and surveillance activities in the Global recognized organization Bharat Heavy Electricals Limited (BHEL) in various divisions.
He acted as Secretary- ISNT Chennai Chapter –He is one of the Faculty of ISNT Chennai Chapter and promoting NDT activities of the organization since 1988 onwards. He occupied himself as course director for several ASNT-SNTTC-1A Certification Training Courses in various NDT methods as organized by ISNT Chennai Chapter and several academic Institutions and Industries.
ADDITIONAL FACULTY
Highly experienced faculties from reputed organizations / institutions with wide experience in the field will also be assigned to share the sessions with case studies & demonstrations.
COURSE FEE:
Rs. 18,000/- + (12.36% ST) per participant. The Fee includes, course material, course kit, Lunch, Tea / coffee and snacks during the Tea Breaks in the Morning & Evening Sessions on all actual days of training programme and Examination days. All payments may be made either by DD or by cheque payable at all branches in favour of EMINENT NDT SERVICES PRIVATE LIMITED, Chennai
The course fees paid would not be returned in case of cancellation or absent by the participants.
DISCOUNTS
10% discount for three or more participants, if sponsored by the same organization.Additional 10% discount on course fee is allowed for the participants who are bringing equipments with accessories (All discounts are applicable only if fee is received by the Institution before the commencement of the programme. Service Tax as applicable (FY 2012-13 @ 12.36%) is to be paid extra over and above the training fee.
Please Note: The participants who make payment will get the course material in advance subject to their assurance in bringing the same to the Training Programme otherwise the course book will be issued subject on the receipt of additional payment for course book.
The participation certificates will be issued only to the participants who have attended all Theoretical and Practical sessions.
Examination
The examination application forms & qualification norms and necessary instructions would be forwarded to those who have registered for the NDT Programme . The Examination fee Rs 500 + Service Tax to be paid extra by the participants who wish to appear ASNT –SNT-TC1A Certification Examination at the time of Registration .The Examination will be conducted by authorized ASNT-Level III personnel as per norms of ASNT-SNT-TC1A .
EMINENT NDT SERVICES PRIVATE LIMITEDNDNo 10, 2 Cross street, Kalaimagal Nagar,
Ekkattuthangal, Chennai -600032,IndiaTel: 91-4443536117, 9500062099, [email protected]
Training & Certification Course in
EDDY CURRENT TESTING-Level II15th - 20th December 2014
APPLICATION FORM
Signature
Note: Please attach two Passport Size Photographs and Photostat copies of qualification and Experience certificates; Exam fees Rs 500 to be paid separately
Name:
Mr/Mrs
Designation
Qualification
Organization
Experience
D O B & Age
Address for Communication
Contact No Email ID
Course Fee Payment Details Amount DD / Cheque No Bank Address