Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem Compact Fluorescent Ballasts Digital Dimming Ballasts
369339h 1 03.06.18
EcoSystem Digital Ballasts
EcoSystem compact ballasts provide high-performance dimming for any compact fluorescent application, including within an EcoSystem Lighting Control System. EcoSystem compact ballasts offer 100% to 5% dimming, providing both energy savings and lighting flexibility.
Features
•Continuous,flicker-freedimmingfrom100%to5%•CompatiblewithEnergi Savr Node with EcoSystem
devices, GRAFIK Eye QS with EcoSystem connection, PowPakdimmingmodulewithEcoSystem connection, and Quantum systems, allowing for integration into an existing/planned EcoSystem lighting control system
•Supportsstandard3-wireline-voltagephasecontroltechnology.
•Programmedrapidstartdesignensuresfull-ratedlamplife while dimming and cycling.
•Lampsturnontoanydimmedlevelwithoutflashingtofull brightness.
•Lowharmonicdistortionthroughouttheentire dimming range.
•Frequencyofoperationensuresthatballastdoesnotinterfere with infrared devices.
•Inrushcurrentlimitingcircuitryeliminatescircuitbreakertripping, switch arcing, and relay failure.
•Ultra-quietoperation.•Protectedfrommiswiresofanyinputpowertocontrol
lead, or from lamp leads to each other and/or ground.•End-of-lamp-lifeprotectioncircuitryensuressafe
operation throughout entire lamp life•Nonvolatilememoryrestoresallballastsettingsafter
power failure•100%compatiblewithallLutron3-wirefluorescent
controls and EcoSystem digital controls.•100%performancetestedatfactory.•Customballastfactorsavailable.
Design tool and specifications can be found at www.lutron.com/ballasttool
•BAA-compliant(BuyAmericanAct)modelnumbersavailable.Adda"U"prefixtothemodelnumber.
EcoSystem ballast, case type K
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem Compact Fluorescent Ballasts Digital Dimming Ballasts
369339h 2 03.06.18
Specifications
Regulatory Approvals•ULListed(evaluatedtotherequirementsofUL935)•ULType1Outdoorfordamplocations•CSACertified(evaluatedtotherequirementsofC22.2No.74)
•ClassPthermallyprotected•MeetsANSIC82.11HighFrequencyBallastStandard•ThisdevicecomplieswithPart18(Non-ConsumerLimits)oftheFCCRules.Operationissubjecttothefollowing conditions:(1)Thisdevicemaycauseinterferencetoradio
equipment.(2)Thisdeviceshouldnotbeinstallednearmaritime
safetycommunicationsequipmentorothercriticalnavigationorcommunicationequipmentoperatingbetween0.45–30MHz.
ModificationnotexpresslyapprovedbyLutronElectronics Co., Inc. could void the users authority to operatethisequipment.ThisNon-ConsumerRFLDcomplieswiththeCanadianstandard ICES-005.
•MeetsANSIC62.41CategoryAsurgeprotection standardsuptoandincluding4kV
•ManufacturingfacilitiesemployESDreduction practicesthatcomplywiththerequirementsof ANSI/ESDS20.20
•LutronQualitySystemsregisteredto ISO9001.2008
Environment•Minimumlampstartingtemperature:50 °F(10 °C)•Relativehumidity:lessthan90%non-condensing•SoundRating:ClassA•Maximumballastcasetemperature:167 °F(75 °C)
Lamp SeasoningRefer to lamp manufacturer for lamp seasoning requirementspriortodimming
Performance•OperatingVoltage:120V~,220/240V~,277 V~ at50 or60 Hz
•Grounding:ballastandfixturemustbegroundedforproper dimming
•DimmingRange:100%to5%measuredrelativelight output
•LampStarting:programmedrapidstart•LampCurrentCrestFactor:lessthan1.7•LightOutputVariation:Constant±2%lightoutputforlinevoltagevariationsof±10%
•LampLife:Averagelamplifemeetsorexceeds specified lamp ratings
•PowerFactor:0.95minimum•TotalHarmonicDistortion(THD):Lessthan10%•Inaudibleina27 dBAambient•MaximumInrushCurrent:3 Aperballastat277 V~, 7 Aperballastat120 V~
•Standbypower:Lessthan1 W
Ballast Wiring & Mounting•Ballastisgroundedbythespecifiedterminalorbya
mounting screw to the fixture•Terminalblocksontheballastacceptthefollowing
wire gauges: –PowerWiringandEcoSystemBus:one18 AWGor
16 AWG(0.75mm2 or 1.5 mm2)solidperterminal –LampWiring:one18 AWGor16 AWG(0.75mm2
or 1.5 mm2)solidperterminal•Ballastmountsusingtwomountingtabsorstuds
within a fluorescent fixture•Wiringfromtheballasttolampsocketsshallnot exceed3ft(0.9m)forT4compactlamps
•Ballastdoesnothavesensorterminals
Warranty 5-year limited warranty with Lutron field service commissioning(3-yearstandardwarranty)fromdate ofpurchase.ForadditionalWarrantyinformation,please visit www.lutron.com/TechnicalDocumentLibrary/Ballast%20and%20Driver%20Warranty.pdf
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem Compact Fluorescent Ballasts Digital Dimming Ballasts
369339h 3 03.06.18
EcoSystem Compact Fluorescent Ballast ModelsLamp Type
Lamp Watts
No. ofLamps
Model CaseSize
InputVoltage
(V~)
InputCurrent
(A)
InputPower
(W)
BallastFactor(BF)
SystemLumens
(lm)
SystemEfficacy(lm/W)
BallastEfficacyFactor
RelativeEfficacy
(RSE)
T44-PinQuad-TubeorTriple-Tube
18W 1 EC3DT418KU1S(Studded)
EC3DT418KU1(Non-studded)
K 120 0.18 21.3 0.95 1140 53.5 4.46 0.80
K 220 0.10 21.1 0.95 1140 54.0 4.50 0.81
K 240 0.09 21.4 0.95 1140 53.3 4.44 0.80
K 277 0.08 20.8 0.95 1140 54.8 4.57 0.82
2 EC3DT418KU2S(Studded)
EC3DT418KU2(Non-studded)
K 120 0.34 41.1 0.95 2280 55.5 2.31 0.83
K 220 0.18 39.6 0.95 2280 57.6 2.40 0.86
K 240 0.17 39.4 0.95 2280 57.9 2.41 0.87
K 277 0.15 39.9 0.95 2280 57.1 2.38 0.86
26W 1 EC3DT4MWKU1S(Studded)
EC3DT4MWKU1(Non-studded)
K 120 0.22 26.4 0.95 1710 64.8 3.60 0.94
K 220 0.12 26.8 0.95 1710 63.9 3.55 0.92
K 240 0.11 26.9 0.95 1710 63.7 3.54 0.92
K 277 0.10 27.0 0.95 1710 63.4 3.52 0.92
2 EC3DT4MWKU2S(Studded)
EC3DT4MWKU2(Non-studded)
K 120 0.43 51.6 0.95 3420 66.3 1.84 0.96
K 220 0.23 49.9 0.95 3420 68.5 1.90 0.99
K 240 0.21 50.6 0.95 3420 67.5 1.88 0.98
K 277 0.19 51.4 0.95 3420 66.6 1.85 0.96
T44-PinTriple-Tube
32W 1 EC3DT4MWKU1S(Studded)
EC3DT4MWKU1(Non-studded)
K 120 0.29 34.8 0.95 2280 65.5 2.73 0.87
K 220 0.15 33.0 0.95 2280 69.1 2.88 0.92
K 240 0.14 33.6 0.95 2280 67.9 2.83 0.90
K 277 0.12 33.2 0.95 2280 68.6 2.86 0.91
2 EC3DT4MWKU2S(Studded)
EC3DT4MWKU2(Non-studded)
K 120 0.55 66.0 0.95 4560 69.1 1.44 0.92
K 220 0.29 64.5 0.95 4560 70.7 1.47 0.94
K 240 0.26 63.0 0.95 4560 72.3 1.51 0.96
K 277 0.24 65.5 0.95 4560 69.7 1.45 0.93
42W 1 EC3DT442KU1S(Studded)
EC3DT442KU1(Non-studded)
K 120 0.36 43.2 0.95 3040 70.4 2.20 0.92
K 220 0.20 42.9 0.95 3040 70.8 2.21 0.93
K 240 0.18 42.7 0.95 3040 71.2 2.23 0.93
K 277 0.15 42.6 0.95 3040 71.3 2.23 0.94
2 EC3DT442KU2S(Studded)
EC3DT442KU2(Non-studded)
K 120 0.73 87.6 0.95 6080 69.4 1.08 0.91
K 220 0.39 85.9 0.95 6080 70.8 1.11 0.93
K 240 0.35 85.1 0.95 6080 71.5 1.12 0.94
K 277 0.31 85.4 0.95 6080 71.2 1.11 0.93
NOTE:The"S"attheendoftheballastmodelnumberindicatesastuddedoption.Removethe"S"foranon-studdedballast.
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem Compact Fluorescent Ballasts Digital Dimming Ballasts
369339h 4 03.06.18
EcoSystem Compact Fluorescent Ballast Case Dimensions
A 4.20in(107mm)
B 1.00in(25mm)
C 3.00in(76mm)
D 4.90in(124mm)
E 4.60in(117mm) (mountingcenters)
F 1.42in(36mm)
G 1.99in(51mm)
H 1.09in(28mm)
I 2.00in(51mm)
J 1.60in(41mm)
A C
ED
B
F
G
H
I
J
AC
ED
B
F
G
Studded
Non-studded A 4.20in(107mm)
B 1.00in(25mm)
C 3.00in(76mm)
D 4.90in(124mm)
E 4.60in(117mm) (mountingcenters)
F 1.42in(36mm)
G 1.99in(51mm)
NOTE: Studded version does not have side connectors.
8-32ThreadedStud0.29in(0.736mm)
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem Compact Fluorescent Ballasts Digital Dimming Ballasts
369339h 5 03.06.18
Lamp Wiring Diagrams
EcoSystem Power Wiring Diagrams
1 Ballastisgroundedviathecaseorterminal.2 WirecolorsshownareforLutroncontrolsandballastsonly.Dimmingcontrolwiresmaynotmatchballastwirecolors.3 TheConstantHotmustnotbewiredtoaswitchingdevice.
Note: ForT4compactlamps,maximumlamp-to-ballastwirelengthis3ft(0.9m)toguaranteeproperperformance.
One Compact Fluorescent Lamp
Two Compact Fluorescent Lamps
EcoSystem Compact Ballast
EcoSystem Compact Ballast
EcoSystem® Compact Ballast
4-pin Lamp Holder
Red
Blue
Red
Blue
Red
Blue
Yellow
Yellow
Red
Blue
Ground1
Ground1
Ground1
Ground1
Neutral
Black(ConstantHot)2,3
E1
E2
4-pin Lamp Holder
4-pin Lamp Holder
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem Compact Fluorescent Ballasts Digital Dimming Ballasts
369339h 6 03.06.18
EcoSystem Bus Wiring Diagrams
EcoSystem Digital Link Overview•TheEcoSystemDigitalLinkwiring(E1andE2)connects
the digital ballasts and drivers together to form a lighting control system.
•EachEcoSystemDigitalLinksupportsupto64 digitalballastsorLEDdrivers,64 occupantsensors,16 daylightsensors,and64 wallstationsorIRreceivers.*
•SensorsdonotdirectlyconnecttoEcoSystemH-Seriesballasts.
•No3-wirephasecontrolwithEcoSystemH-Seriesballasts.
•E1andE2(EcoSystemdigitallinkwires)arepolarityinsensitive and can be wired in any topology.
•AnEnergiSavrNodewithEcoSystemunit,GRAFIK EyeQS control unit with EcoSystem, or Quantum system providespowerfortheEcoSystemDigitalLinkandsupports system programming.
•AllEcoSystemDigitalLinkprogrammingiscompletedbyusing the Energi Savr App for an Apple iPad or iPhone mobile digital devices, GRAFIK Eye QS with EcoSystem, PowPak dimming module with EcoSystem, or Quantum System.
•Forcompleteinformation,seetheEcoSystem Design & Application Guide(P/N367-1533)at www.lutron.com.
EcoSystem Digital Link Wiring•BallastEcoSystemDigitalLinkterminalsonlyacceptone18 AWGor16 AWG(0.75mm2 or 1.5 mm2)solidcopperwire per terminal.
•MakesurethatthesupplybreakertotheDigitalBallastandEcoSystemDigitalLinkSupplyisOFFwhenwiring.
•ConnectthetwoconductorstothetwoDigitalBallastterminalsE1andE2asshown.
•UsingtwodifferentcolorsforE1andE2willreduceconfusion when wiring several ballasts together.
•TheEcoSystemDigitalLinkmaybewiredClass1orClass2.Consultapplicableelectricalcodesforproperwiring practices.
* PowPakdimmingmodulewithEcoSystemcansupport32ballastsor LED drivers.
TotheEcoSystem DigitalLink Supply
Notes•TheEcoSystemDigitalLinkSupplydoesnothavetobelocatedattheendoftheDigitalLink.
•EcoSystemDigitalLinklengthislimitedbythewiregaugeusedforE1andE2asfollows:
Wire Gauge Digital Link Length (max)
12AWG 2200ft
14AWG 1400 ft
16AWG 900ft
18AWG 550 ft
Wire Size Digital Link Length (max)
4.0 mm2 828m
2.5mm2 517 m
1.5 mm2 310m
1.0 mm2 207m
0.75 mm2 155 m
BallastTerminals
BallastTerminals
GRDNEUDHSH
E1E2
LINE
Class 2 Bus
GRDNEUDHSH
E1E2
LINE
Class 2 Bus
Apple,iPad,andiPhoneareregisteredtrademarksofAppleInc.
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem Compact Fluorescent Ballasts Digital Dimming Ballasts
369339h 7 03.06.18
EcoSystem Ballast Wiring: Line Voltage Dimmers
EcoSystem Ballasts and 3-wire dimmers
•Lutron3-wiredimmersonlycontroltheballaststheyare wired to; EcoSystem ballasts do not support groupingof3-wirecontrolinput.
3-Wire Control Wiring
•MakesurethatthesupplybreakertotheDigital BallastisOFFwhenwiring.
•Wireasshown
Line input Connects toHot DimmerBlackWire
Neutral DimmerWhiteWire
Dimmer wire Connects toYellow BallastOrange(DH)
Red BallastBlack(SH)
White BallastWhite(NEU)
Green EarthGround(GND)
•EcoSystemballastlinevoltageand3-wireinput terminalsonlyacceptone18AWG(0.75mm2)or16 AWG(1.5mm2)solidwire.
Emergency and 3-wire
•EcoSystemballastscontrolledbyawallboxdimmershould not be used for emergency/egress lighting unless an external emergency ballast is used in the fixture. See Lutron App Note #50 at www.lutron.com.
•EcoSystemballastsmaybeusedforemergency/egress lighting when controlled by a Lutron dimming panel(GP);wherethepanelisadedicated emergency panel.
Notice
3-Wirecontrolturnsoffdigitalballastswhenthecontrol is in the off position.
LUTRON
GRDNEUDHSH
E1E2
LINE
Class 2 Bus
GRDNEUDHSH
E1E2
LINE
Class 2 Bus
3-WireDimmer
Black
White
Ground1
Ground1
1Ballastisgroundedviathecaseorterminal
Ground1
Gre
en1
White
Orang
e
Black
Gre
en1
Yellow
Hot
Neutral
Red
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
EcoSystem Compact Fluorescent Ballasts Digital Dimming Ballasts
369339h 8 03.06.18
ATTENTION ELECTRICIANS AND CONTRACTORS
Ballast/Socket Leads
Leadlengthsfromballasttosocketmustnotexceed7 ft(2 m)forT8,T5,andT5HOlinearlamps.
Lamp Sockets
LampsocketsasperIEC 60400arerequiredtoensurepositivelamp-pintosocketcontact.
Lamp Mounting
Manyfluorescentlampsocketsareavailablewithmounting slots to vary the height of the lamp away fromthegroundedmetalsurface.Havingafluorescent lamp too close to the grounded metal will reducelamplife.Havingafluorescentlamptoofarawayfromthegroundedmetalwillmakethelampflickerornotturnonatall.Pleasenotethatallofthelamp heights are measured between the grounded metal surface and the glass wall of the lamp.
Mounting for T4 Lamps
Do not allow lamp glass to come in direct contact with any grounded metal surface.
Ballast Operating Temperature
Ballastcasetemperaturemustnotexceed167 °F(75 °C) at any point on ballast.
Cold Air Flow
Ensurethatnocoldair(fromHVACsystem,etc)isblowing across the lamps. Cooling the lamp will cause performanceissuesasnotedinNEMA LSD-34.
Wiring and Grounding
Ballastandlightingfixturemustbeeffectivelygrounded.Ballastsmustbeinstalledpernationalandlocal electrical codes.
IMPORTANT: Lamps must never touch ground plane and should be placed without obstruction.
Lamp Lamp Socket(side view)Mounting height
Grounded metalBallast
ATTENTION FACILITIES MANAGERS
PERFORMANCE
Lamp Seasoning
Consult lamp manufacturer’s recommendations on lamp seasoning prior to dimming.
SERVICE
Replacement Parts
UsereplacementpartswithexactLutronmodelnumbers.ConsultLutronifyouhaveanyquestions.
Further Information
For further information, please visit us at www.lutron.com/ballasts or contact Lutron Customer Assistanceat1-844.LUTRON1.
)Lutron,Lutron,Quantum,GRAFIKEye,PowPak,andEcoSystemaretrademarksofLutronElectronicsCo.,Inc.,registeredintheU.S.andother countries.
EnergiSavrNodeisatrademarkofLutronElectronicsCo.,Inc.
Apple,iPad,andiPhoneareregisteredtrademarksofAppleInc.
pdfformfields_file_11pages.pdfpdfformfields_file_11pages.pdf
A: B: C: D: E: F: G: 1H: 2I: 3J: 4K: 5L: 6M: 7N: 8