Upload
vudiep
View
219
Download
3
Embed Size (px)
Citation preview
Economical pocket type dust collector with manual shaker cleaning
Superior technology generating substantial operating savings
AQC Dust collecting systems
• (95to99%@5-10 microns)efficiency pockettypefilter
• Economicaland easytoinstall
• Upto5000CFM capacity
• Variousapplications
nancefree
• Idealforsmallshops andtrainingcenters
(wooddusts,metal,plastics,composites)
• Virtuallymainte-
Maxiply Economical pocket type dust collector with manual shaker cleaningBased on the MaxiViBE design, the Maxiply is more economical since it does not need an enclosed cabinet and the cleaning system is performed by manually shaking the filter envelope. The (95 to 99% @ 5-10 microns) efficiency filter pocket envelope allows clean air to be recycled back into the premises for maximum energy savings. primarily developed for interior installation in small shops and vocational schools, its use is per-fect for medium to large size pollutants such as sawdust, grinding, buffing or sanding of different metals, powders and compo sites. air volume capacity can vary from 500 CFM to 5000 CFM. The satin interior coated filter helps to minimize dust caking on filter surface. The angled hopper ensures cons tant sliding of pollutants into the dust storage drum. The support structure can be easily dismantled for relo cation into another part of the facility using the unit or for a new installation in a room with limited size doorways.
A Leading-Edge, High-Performance CompanyAQC’s strength lies in its innovative products designed and developed to generate substantial savings throughout their entire operating life.
AQC is renowned for its technological innovation, safe and sophisticated equipment design, as well as its robust and precise product manufacturing. For example, the unique design of the baffles inside AQC dust collectors makes filter cleaning easy. The AQC cartridge holder design provides maximum filter surface and enhanced filter performance. The ultra-smooth concept inside AQC fume arms makes them maintenance-free.
In short, AQC equipment is designed and built to generate substantial operating savings in terms of time, money and energy. This translates to major reductions in operating costs – from 10 to 20% – throughout the equip-ment’s service life. This scale of savings can represent a significant portion of the equipment’s total purchase price. Companies looking to maximize their profitability should factor in these savings when purchasing equipment.
The unique design and manufacturing of AQC equipment generates significant savings for various reasons:
• Substantialincreaseinthedurationoffilters.
• Lowerenergyconsumptionduringyearsofuse.
• Significantlylessmaintenance(easytoclean,robustmanufacturing, a minimum number of more reliable and durable parts).
• Reducedoperatingcosts(lessfrequentoverhauls,lackof or minimum down time, etc.).
• Loweradministrativecosts(coordination,follow-ups,supervision) due to much less frequent breakdowns.
• Safedesigncanpreventseriousorevenfatalaccidents.
• Increasedcomfortandproductivityofpersonnel.
Equipment acquisition cost
Equipment operating cost* : energy, filters, maintenance, overhauls, repairs, breakdowns…
Equipmenttotal cost
The acquisition cost is just one part of the equation. It’s the total cost including the operating cost *throughout the life cycle of the equipment that must be kept low. This is what AQC delivers. The advanced technology, design, robustness, durability and safety of AQC products generate major savings during the equipment’s entire life cycle.
Dust collecting systems
3
Fume Arms
MAXIPLY efficient dust filtration with economy in mind
• Auniqueinexpensivesolutionforsolidparticlefiltration
• Efficiencycombinedwitheaseofuse
• Minimumdustcakingonfilter
• Idealforschoolsandsmallshops
• (95to99%@5-10microns)efficiencyfilterpocketenvelope
• Directdriveblower.Nopulleyadjustement
• Upto5000CFMwithlowtomediumstaticpressure
• Filtercleaningbymanualshakermechanism
Pocket type dust collector with manual shaker cleaning
Note : ideal for capture and filtration of wood dusts, plastic shavings, non reactive metal sanding and buffing, composites shops*.
*RefertoNFPArequirementsinpage7ofthisleaflet.
Typical applications for the MAXIPLY
• Smalltomediumsizewoodshops,cabineterymaking
• Trainingcentersandvocationalschools
• Plasticandcompositesshops
• Nonereactivemetaltransformingfacilities
Outstanding MAXIPLY features
General descriptionTheMAXIPLYdustcollectorsingleinletdesignallowsthemainmanifoldtobeconnectedtomultipledropstowardpickuppoints.Sincenoreturnairductworkordiffusersarerequired,filteredairisrecycledintothefacilitybymeansofthefour(4)opened sides of the pocket filter envelope. The direct drive fan and motor assembly carries the particulates into the angled hopper. Heavy dusts and solids fall into the drum by gravity and finer dusts are pushed into the high efficiency multiple pocket filter envelope. Integrity of the installation is ensured by bolting the support structure on the floor surface. When cleaning the filter is required, the handle is moved rapidly back and forth making a rocking motion on the camshaft thus dislodging the particulates inside the filter. After a few minutes, the decanter effect allows the particulates to fall into the dust storage drum.
Pocket type dust collector with manual shaker cleaning
Extended surface high efficiency pocket filter
Bolted steel structure for easy assembly
Angled hopper for constant dust discharge
Handle grip
Radial blade high pressure impeller
Dust storage drum with grab handles
Direct drive with TEFC motor
Pre-drilled holes for floor anchors
Quick release drum latch
Manual handle for filter cleaning
MAXIPLY general dimensions
Pocket type dust collector with manual shaker cleaning
93 1
/2"
(233
5 m
m)
31 7/8"(795 mm)
" (108
0 m
m)
8/1 34
40 5/8"(1015 mm)
Maxiply DMP-170S
52"(1320 mm)
76"(1930 mm)
92 7
/8"
(232
0 m
m)
44 7/8"(1122 mm)
45 3
/4"
(114
0 m
m)
49 3/4"(1240 mm)
Maxiply DMP-270S
55 3/4"(1420 mm)
91 1/2"(2330 mm)
5Note : width and depth footprint dimensions indicated above are with largest fans available. Actual dimensions with smaller fans will be submitted.
Maximum air capacity Surface of filtration
1700 CFM / 805 L/s 170 sq. ft. / 18 sq. m.
Maximum air capacity Surface of filtration
2700 CFM / 1280 L/s 270 sq. ft. / 25 sq. m.
DMP-270S
DMP-170S
MAXIPLY general dimensions
Pocket type dust collector with manual shaker cleaning
92
7/8"
(232
0 m
m)
44 7/8"(1120 mm)
46 1
/4"
(115
5 m
m)
49 3/4"(1240 mm)
Maxiply DMP-350S
93 1/2"(2440 mm)
55 3/4"(1420 mm)
101
3/8"
(253
5 m
m)
44 7/8"(1120 mm)
45"
(112
5mm
)
49 3/4"(1240 mm)
Maxiply DMP-450S
60 3/4"(1550 mm)
94"(2385 mm)
DMP-350SMaximum air capacity Surface of filtration
3500 CFM / 1665 L/s 350 sq. ft. / 32 sq. m.
DMP-450S Maximum air capacity Surface of filtration
5000 CFM / 2360 L/s 450 sq. ft. / 42 sq. m.
Note : width and depth footprint dimensions indicated above are with largest fans available. Actual dimensions with smaller fans will be submitted.
Technical data
Unit weight (without fan)
Model numbers Weight [lbs] / [kg]
DMP 170S 350 / 160
DMP 270S 425 / 193
DMP 350S 450 / 205
Fan/motor weight
Fan Weight [lbs] / [kg]
2 H.P. 235 / 106
3 H.P. 270 / 122
5 H.P. 365 / 165
7,5 H.P. 450 / 205
10 H.P. 650 / 295
15 H.P. 725 / 330
Pocket type dust collector with manual shaker cleaning
Type of dust F.P.M. / meter per second
Metal dust 4200 / 21
Sawdust (dry) 3800 / 19
Cement dust 7000 / 35
SAFETYNOTES
TheMAXIPLYdustcollectormeetsNFPA664requirementsasperthefollowingcriterias:a) is not used with mixed applications of wood dusts and non reactive metal grinding ;b) is not connected to sanders or abrasive planers with mechanical material feeds ;c) regular daily cleaning ; d)collectorislocatedatleast20feet(6.1meter)fromanymeanofegressorarearoutinelyoccupiedbypersonnel.Aphysicalbarriercan
be used but dust collector may not be completely ‘’boxed’’ into a room ;e)MAXIPLY dust collectors are not designed to collect any potentially reactive dusts such as aluminium, magnesium, tantalum, titanium
andzinconium.MAXIPLYdoesnotmeetNFPA484standard.
CharT 1 CharT 2
CharT 3
H.P. 220 / 1 / 60 208 / 3 / 60 460 / 3 / 60 575 / 3 / 60
2 H.P. 12 6.8 3.4 2.7
3 H.P. 17 9.6 4.8 3.9
5 H.P. 28 15.2 7.6 6.1
7.5 H.P. 40 22 11 9
10 H.P. 50 28 14 11
15 H.P. 68 42 21 17
CharT 4Recommended duct velocities for particulates Amperage draw
Note:otherparticulatevelocitiesmayberequired. RefertoIndustrialVentilationHandbookformoredetails.
Note:allweightsindicatedaboveareforreference only.Slightvariationsmayoccur.
Static pressure & airflow for 7.5, 10 and 15 H.P. fans
CITATS
ERUSSERP
1000470
1500710
2000945
25001180
30001415
35001665
40001890
45002125
45002125
50002360
55002600
60002830
1750 – 7.00
2000 – 8.00
1500 – 6.00
1250 – 5.00
1000 – 4.00
750 – 3.00
500 – 2.00
250 – 1.00
Pa – w.g.
L/sCFM
AIRFLOW7.5 H.P 10 H.P. 15 H.P.
Static pressure & airflow for 2, 3 and 5 H.P. fans
CITATS
ERUSSERP
500235
1000470
1500710
2000945
25001180
30001415
35001665
40001890
45002125
1750 – 7.00
1500 – 6.00
1250 – 5.00
1000 – 4.00
750 – 3.00
500 – 2.00
250 – 1.00
Pa – w.g.
L/sCFM
AIRFLOW2 H.P 3 H.P. 5 H.P.
Note : static pressure and airflow indicated below are for references only. Higher static pressure for transport velocities may be required in different applications. Contact factory for proper fan selection and fan curves.
Create your MAXIPLY specification
1. Dust collector should include
A bolted and welded steel support structure with cross braces for reinforcement with primer coat and polyurethane finish coat, hopper for proper dust discharge into collector bin, 25 gallon gasketed dust collector bin with grab handles and quick release drum latch, filter envelope interior with satin coat for minimal dust caking, cleaning system should include manual handle connected to camshaft for shaking the filter envelope, fan supports should include pre-drilled fittings for floor anchors, capability of being dismantled for relocation with components to fit through a regular size door frame, fan assembly should be direct drive, aluminum spark proof radial blade, without belts or pulleys with TEFC motor, four (4) opened sides andopened top for air recirculation into the premises, dust deflector at hopper inlet.
2. Dust collector should be model :
170Swith170squarefeetoffilterenvelope
270Swith270squarefeetoffilterenvelope
350Swith350squarefeetoffilterenvelope
450Swith450squarefeetoffilterenvelope
3. Dust collector should include RBE 1750 R.P.M. fan with :
a) 2H.P.motor
b)3H.P.motor
c)5H.P.motor
d)7.5H.P.motor
e)10H.P.motor
f)15H.P.motor
4. Motor voltage should be :
a) 230-1-60
b) 208-3-60
c) 460-3-60
d) 575-3-60
5. Unitshouldincludeanexplosion
proofmotorinlieuofregularTEFCmotor.
6. Unitshouldincludeaspare
replacement filter.
7. Unitshouldinclureaspare
25gallondustbinwithcover.
8. Drumdolleyfordustbin.
9. Manualstarterwithoverloadprotection.
10. Magneticstarterwithoverloadprotection.
11. Explosionproofmagneticstarterwith
overload protection.
660,delaSabliere,Bois-des-Filion(Quebec)CanadaJ6Z4T7
Tel.:1-866-629-4356 •Fax:(450) 621-6677
Website:www.aqcdust.com•e-mail: [email protected]
To obtain a free copy of our full-colour corporate brochure, please call : 1-866-629-4356
MA
XIP
Y 2
012
Prin
ted
in C
anad
a
Cop
yrig
ht ©
A.Q
.C. I
nc.
ContinuousproductimprovementisapolicyofA.Q.C.Inc.Productfeaturesandspecificationsmaybemodifiedwithoutpriornotice.
YourA.Q.C.representativeis:
Pocket type dust collector with manual shaker cleaning
Note : specifications listed above may be modified to suit application. Contact A.Q.C. or representative for information.