Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
labs.iacindustries.com • 714.990.8997
Eclipse™ Laboratory Grade Steel Furniture
█ Casework Cabinetry
█ Reagent Racks & Shelves
█ Wall Mounted Cabinets
█ Adaptable Lab Table Systems
1 labs.iacindustries.com
Casework Wall Cabinets
Eclipse Steel Casework is the foundation of any laboratory’s workspace. There are configurations and sizes for all storage and function requirements. Casework is available in both counter/ADA and desk heights, with removable back panels and adjustable floor glides.
Eclipse Wall Mounted Cabinets are available in a wide range of sizes to provide all the extra storage capacity your lab requires. Hinged, sliding or open cabinets are all choices.
Eclipse™ Provides Solutions for Fixed,
Quick Facts:
█ Casework and wall mounted cabinets don’t always cost less than their adaptable equivalents. In fact, future flexibility can be a real cost saver. Remember to always look at future applications as well as today’s .
█ Fixed furniture joins together to form walls, islands and/or peninsulas. Remember that fixed also means “difficult and costly to move” if needed. There is value in the flexibility provided by adaptable furniture.
█ Adaptable furniture refers to furniture that can be moved and/or reconfigured. Assuming it hasn’t been connected to Mechanical, Electrical and Plumbing (MEP) components. Eclipse casework and wall cabinets are adaptable when originally planned/specified prior to installation.
█ Mobile furniture refers to tables, carts and/or cabinets that can easily be moved. These products typically feature some form of casters or leveling casters applied.
█ Table applications are most often the least costly way of configuring your lab with future mobile capabilities. Tables are easy to move, easy to reconfigure and easy to re-surface. Plus, you can add table top mounted storage at any time.
█ Flexibility, mobility and adaptability. It is proven that most laboratories find reason to rearrange the layout of furnishings over time, but cannot because they are fixed. Don’t let this frustration happen to you. Keep things simple and do not overthink the process. Rather, always simplify, simplify, simplify.
Reagent Racks/Shelving
Eclipse RA Racks/Shelving provide arm’s reach storage space for frequently used items and storage needs. They feature smooth and strong extruded aluminum uprights that provide infinite vertical adjustability for shelving and utility components.
PAGE 23PAGE 19PAGE 9
2labs.iacindustries.com
LD-4 Adaptable LAB Tables
Suspended Drawers and Cabinets
Mobile Drawers and Cabinets
Standard 4-Leg LAB Tables
The Eclipse LD-4 is a premier adaptable table for laboratories. They form versatile modular systems that allow you to assemble work areas – from simple and basic to integrated groups with connected lines and islands. .
Eclipse LAB Tables are strong, stable and durable, with clean lines. Frames and are available in a wide range of sizes, with and associated countertop solutions selected separately. Available in fixed or adjustable heights.
Lab-Grade Suspended Drawers and Cabinets are available for both the LD-4 Adapatable Tables and standard Lab Tables. They are available in multiple sizes and drawer/cabinet combinations to suit all storage needs. .
Lab-Grade Mobile Cabinets offer an convenient way to move equipment, tools, beakers and documents anywhere within your laboratory environment, providing complete mobility.
Adaptable and Mobile Laboratory Grade Steel Furniture
PAGE 41PAGE 41PAGE 37PAGE 25
3 labs.iacindustries.com
Careful Preliminary Planning
█ Begin to learn and understand the building process in designing a laboratory
█ Structure your internal team members based on their skill sets, then assign expectations
█ Set protocol for internal communication of your entire team, including architects, engineers, contractors and lab planners
After internal processes are in place it is time for your needs assessment. There are important particulars to game plan first, including the following: space, processes, support, materials and storage.
You are already heading in the right direction by deploying these beginning strategies first. By applying these LAB Planning concepts you have effectively managed your exposure to over planning and/or under planning.
Simplicity
Focusing on downsizing or eliminating obstacles between processes is key to improving process flow and function. During your initial LAB Planning these are important decisions as they conclude in less expenses, construction, and time consumption. Obstacles hindering processes can be structures, walls, existing furniture, etcetera.
Think outside the box in your initial planning. Simplify processes by opening your floorplan and allow room for change in the future. Modular or adjustable furniture are always good options when concentrating on the aforementioned strategy. Improve your LAB with lean concepts that are agreed upon in the beginning by your team; again saving money.
Spend time understanding/learning the importance of islands and/or peninsulas to improve overall process control and usable space. Often times laboratories consume up to and between 60-70% of their usable square footage with fixed furniture applications. Most modern labs require furniture to have modular applications. A smart front end choice that considers future production flow changes. Again, saving money in the long term.
Planning the Construction of Your Laboratory
4labs.iacindustries.com
Establishing product placement and avoiding square footage consumption (overbuild)
Work with your architect and contractor to select your plumbing (wet wall) placement. It is always a savvy strategy to place sinks closest to the proximity of your most utilized testing and research areas. Establish your product flow - then select your wet walls - creating a process of efficiency from the very start and mitigating possible reconstruction in the future.
Safety is always first - it is a smart choice to place a dedicated sink for hand and/or eye washing near an entry or exit of the lab - Remember that sinks are costly due to the plumbing attributed to the construction costs. It is recommended to avoid placing sinks in areas that aren’t already prepped for plumbing. Example of this would be a sink at the end of an island or peninsula. Plumbing is expensive to install as it is, especially in areas where plumbing doesn’t already exist. A well laid out laboratory plan has a primary focus on MEP (Mechanical, Electrical and Plumbing). These subjects can make or break a new labs budget.
MEP - review your buildings capacity for power. Avoid using extra power or permanently fixing raceways to furniture; these drive costs up. Remember the less plumbing requirements, the less cost in construction and possible future maintenance.
During your initial projections you should have begun planning of your build needs - with a main focus on power and ventilation. Your architect and contractor are a major contributor to this phase. Always plan ahead for storage, supplies, specialty gasses and/or data systems, etcetera. This is important to resolve at the beginning as it will remedy duplications and added costs.
Special recognition is highly important, as it all plays a role in added costs. Know your room dimension and whether larger size cabinets and/or tables meet your application needs. Larger width cabinets and tables have modest increases in price compared to smaller sizes, it is wise to assess if a larger cabinet will work as opposed to two or three smaller cabinets adding to the same width.
5 labs.iacindustries.com
Know your options for, and how to apply, Wall Storage and Shelving
Wall Cabinets and/or shelving are most cost effective p/linear foot compared to standard floor based cabinets.
Wall Cabinets and/or shelving provide easy access to products/tools and also provide a visual of what is being stored.
These same concepts apply to islands and peninsulas as well.
Back to Simplicity and basics
Now that you have sat down with your team, discussed roles and skill sets, selected your architects and draftsmen, it is time to develop your product of choice.
After choosing what products best fit your needs you can then begin to standardize amongst your various laboratories and/or processes within a single lab environment.
Choose the RIGHT manufacturer -- IAC Eclipse branded products provide mobility and adjustability to any lab environment. Our integral team of LAB planners will assist you in deciding what products are the best fit for your specific application. In fact IAC provides an interactive online laboratory product configurator that helps you visualize your laboratory wall/s.
By following the aforementioned you have already tackled the most costly particulars of your project; design, build, construct, produce. However, before you begin production, you need to select a manufacturer of choice to purchase your metal furniture from. We have 100% confidence that our team and the product produced by IAC Industries is the choice for you. Why? Decades of quality and experience, known results and a history as one of the industry’s top steel furniture manufacturers.
6labs.iacindustries.com
The Eclipse series of laboratory grade steel furniture provides the structure and foundation to easily and systematically furnish any modern lab. Eclipse brings the versatility, ease of future expansion and reconfiguration, storage, mobility, strength and stability for all types of laboratories; with full accessibility to mechanical, plumbing and electrical components. Our decades of experience contribute to making Eclipse the most adaptable, functional, durable and easiest to deploy steel furnishing available for labs today.
Eclipse casework is manufactured using heavy gauge, cold rolled steel, with fully welded seams. Top to bottom, the design is reinforced to maintain rigid structural integrity and long term durability. Each cabinet is finished with electro-statically applied powder coat paint. The Eclipse line offers countertop solutions, service fixtures,
fillers, reagent racks and shelving, faucets and sinks, and electrical/data connections, seating and many other necessary laboratory accessories. This includes the IAC Industries network of resources to help complete the full spectrum of your laboratory needs; including necessities such as fume hoods, peg boards and other various lab equipment elements.
Whether you are building a new laboratory, renovating or upgrading an existing lab, the Eclipse Series of laboratory grade steel furnishing will fulfill your application needs. In addition to the standard Eclipse products is our fulfilment of custom requirements that includes adaptable tables and cabinets, modular furnishings, and data connectively, lighting and functionality – fulfilling your application needs is our mission.
Eclipse™ Laboratory Grade Steel FurnitureCasework, Cabinetry & Reagent Racks/Shelving, Adaptable Table Systems
Solution for Any LabEclipse Laboratory Grade Steel Furniture is perfect for any lab environment – some examples are:
█ Medical
█ Health Care Device
█ Pharmaceutical
█ Pathology
█ Microbiology
█ Hospital
█ Blood Banks
█ Chemical Testing
█ Dental
█ Veterinary
█ Oil Industry
█ Food & Bev - R&D and Q.C.
█ University
█ Brain Research
█ General R&D
7 labs.iacindustries.com
Eclipse™ Specifications
Casework Construction
Drawer Construction
1. Constructed with two sub-assemblies – drawer body, drawer back and inside front are one single piece – the second piece being the drawer front.
2. The drawer front is fastened to the drawer body using sheet metal screws for easy adjustment and alignment.
3. Expanding spray foam is applied as sound deadening material between drawer front and drawer body front.
4. Standard drawers have aluminum wire door pulls.
Knee Space Panels and Fillers █ All panels and fillers are fabricated from 20 gauge cold rolled steel.• Unless design specifications require a thicker gauge
█ Typically mounting flanges on all panels and fillers are 1˝.
█ Knee Space panels accommodate the width of the opening and are formed with mounting flanges. Panels are constructed in various standard heights to fit different openings.
█ Front base fillers are constructed with 4.5˝ high x 2.9˝ deep to space at the bottom to replicate base cabinet profile.• Rear base fillers are constructed the same way but without toe
space
█ Corner toe space fillers are 4.5˝ x 4.5˝ high to close toe space area between base cabinets in 90 degree corners.
1. Eclipse cabinets are all steel with flush, inset front construction.• Cabinets are welded to provide interchangeable doors and
drawers
2. Eclipse Base cabinets – MIG gas welding is applied to the sides, bottom, back and front; gas welded front corners and ground to create a smooth surface for paint application.
3. Base cabinets include removable back panels to access plumbing or other installation required MEP.• Back panels can be removed from the front of the cabinet
4. Bottom of base cabinets include access holes (with caps) for access to levelers.• Toe Kick Dimensions = 4.5˝ high x 2.9˝ deep
5. Double width cabinets = 2˝ wide center upright; screwed into place allowing for increased adaptability.• Exception = open cabinets do not include a 2˝ wide center beam
6. Cabinet Doors are double pan construction with inside panel fastened to the outside door panel using screws to create one integral piece. Expanding spray foam is applied as sound deadening between the door front and the door back panel.
7. Adjustable Shelves are formed with flanges on all sides with returns on front and back of shelf. Eclipse shelves are made of 16 gauge cold rolled steel.
16 GA TOP RAIL16 GA RECTANGULAR
TOP EDGING
18 GA SIDES
LEVELING CHANNELWELDED TO BOTTOM
1/2-13 X 2.50FLOOR GUIDE
REAR PILASTER
DOOR HINGE BRACKET
FIVE KNUCKLESTAINLESS STEEL HINGE
7
65
4
3
2
1
ANNODIZEDALUMINUM
WIRE HANDLE5˝ CENTER
SELF CLOSINGWITHIN 1-1/2˝
DRAWER FACE20 GAGE
SELF CLOSINGDRAWER SLIDES
ONE PIECE 20 GAGEDRAWER BODY
RECTANGULAREDGES FORSTRENGTH
12
3
4
Eclipse™ Laboratory Grade Steel Furniture
8labs.iacindustries.com
Wall Cabinet Construction1. There are three available heights: 24˝, 30˝ and 36˝.
2. Top, sides, back and bottom are spot welded to form one unit.
3. Front panel seams are gas welded closed and ground flush for smooth finish.
4. The cabinet sides and back include slots for the attachment of shelf clips to support the adjustable shelves – which are adjustable in 2˝ increments.
5. Doors are double pan construction with an inside panel fastened to the outside door panel to create one piece.
6. Doors without glass have expanding spray foam applied as sound deadening between the door front and door back panels.• Glass Doors are double-panel, reinforced frame, metal construction
same as above with glass held in by door inside panel and glued into place with silicone; doors are tempered 1/8˝ inches thick glass.
• Sliding doors operate on metal rollers positioned at the bottom of the door assembly for easy alignment and rolling action, with a center guide at the top of the cabinet. Sliding doors have stops on inside.
Materials and Gauges █ Constructed with heavy gauge cold rolled steel.
█ Casework and Wall Cabinets• Body (cabinet sides): 18 gauge• Cabinet bottom construction: 16 gauge• Cabinet top supports: 16 gauge• Cabinet Back Panels: 20 gauge• Cabinet Filler Panels: generally are 20 gauge but do vary depending
on design requirement • Cabinet doors: 20 gauge• Knee Space Drawers: 20 gauge• Drawer Suspensions: 14 gauge • Drawer channel: 16 gauge full extension that are easy close (self-
closing) • Corner Gussets: 11 gauge• Drawer front: 20 gauge• Drawer body: 20 gauge• Drawer back and inside front: Eclipse Drawer body is one single
piece that includes the back, sides and inside front all constructed with one piece of 20 gauge
• Tables, Aprons and Frames: 16 gauge and 14 gauge
Painting Process
1. Our multi-step finishing process prepares cabinets for electrostatically applied powder coat paint.
2. The units are placed on a conveyor and fed into the processing system at a controlled rate to insure parts are thoroughly cleaned.
3. Complete cleaning of the metal shall be accomplished by the use of an alkaline phosphate cleaner to remove oil, grease and soil.
4. The units are rinsed first by a cool water spray and then a final rinse of deionized cold water.
5. The completely treated units continue on the conveyor through a dry-off oven at high temperature for 5-to-7 minutes to dry.
Following the phosphate cleaning process – powder coat with specially formulated acrylic or epoxy finish is applied and baked on high temperature for 12-to-14 minutes, then cooled to produce optimum coating properties.
There are three (3) standard colors available with more to choose from if requiring different color options or necessity to match colors.
Standard Color ChoicesCOLOR CHIPS NAME CODE
Appliance White H
Ivory C
Soft Gray MD
**Custom colors or color matching are available upon request
FLUSH FRONTFRAME
16 GAGEMETAL SHELF
ADJUSTABLE ON2˝ INCREMENTS
ANNODIZEDALUMINUMWIRE HANDLE5˝ CENTER
TOP, BOTTOM, SIDES, AND BACK ALLWELDED TOGETHER
WALL MOUNTEDHANGER RAIL
PAD
ROLLER CATCH
DOOR HINGEBRACKET
FIVE KNUCKLESTAINLESS
STEEL HINGE
2
3
4
5
6
1
Eclipse™ Laboratory Grade Steel Furniture
9 labs.iacindustries.com
Laboratory Grade Steel Casework
█ Standing cabinet height = 35˝ – Surface + Cabinet = 36˝ nominally
█ Desktop height (ADA Compliant) = 30˝
█ Heavy gauge, cold-rolled steel
█ Meticulously-finished seam welding
█ Powder-Coat baked finish
█ Removable back panel to access utilities
█ Fully boxed, sound dampened doors
█ Self-closing, steel ball bearing drawer slides
Standard cabinet depth is 22˝ with a height of 35˝, 36 nominal inches with installed surface, including leveling glides. All Eclipse casework includes removable rear panel to access utilities. Total table top depth is 30˝, including a 1˝ overhang (22˝ of cabinet, 1˝ of overhang and 7˝ of utility space). Filler panels close off the rear access space at the ends of each cabinet run.
Eclipse casework is constructed of heavy gauge cold rolled steel, with front seams welded closed and finished smooth. Floor glides are conveniently adjustable from inside of cabinets.
Powder coating provides a durable finish. Drawer and cabinet doors may be finished in a choice of contrasting colors. Cabinets with 28˝ and 21˝ high doors include one adjustable shelf.
█ Chemsurf®/Chemical Resistant Plastic Laminate
█ Butcher Block - Hardwood/Maple
█ Static Dissipative Laminate
█ Trespa®/Phenolic Resin
█ Epoxy Resin
█ Stainless Steel
█ Plastic Laminate
Table Top Materials
10labs.iacindustries.com
Eclipse™ Steel Casework
35˝ Counter Height
Doored Cabinets Only
COMBINATION WIDTH PART NUMBERS
1x Left Door1x Shelf
15˝ 7000001
18˝ 7000002
24˝ 7000003
30˝ 7000004
1x Right Door1x Shelf
15˝ 7000011
18˝ 7000012
24˝ 7000013
30˝ 7000014
2x Doors1x Shelf
30˝ 7000021
36˝ 7000022
42˝ 7000023
48˝ 7000024
Vented Sink Base
COMBINATION WIDTH PART NUMBERS
1x Sink Based Vented
1x Left Door
18˝ 7000331
24˝ 7000332
30˝ 7000333
1x Sink Based Vented
1x Right Door
18˝ 7000341
24˝ 7000342
30˝ 7000343
1x Sink Based Vented
2x Doors
30˝ 7000351
36˝ 7000352
42˝ 7000353
48˝ 7000354
52˝ 7000355
58˝ 7000356
Configure Online with IAC Lab DesignerSee the inside back cover to learn more about this fast and efficient tool to plan your laboratory furnishing.
No Doors - Open Face
COMBINATION WIDTH PART NUMBERS
1x Open Shelf
15˝ 7000191
18˝ 7000192
24˝ 7000193
30˝ 7000194
36˝ 7000195
42˝ 7000196
48˝ 7000197
11 labs.iacindustries.com
Eclipse™ Steel Casework
35˝ Counter Height, continued
Drawers with Doored Cabinets
COMBINATION WIDTH PART NUMBERS
1x 6˝ Drawer1x Left Door
1x Shelf
15˝ 7000031
18˝ 7000032
24˝ 7000033
30˝ 7000034
1x 6˝ Drawer1x Right Door
1x Shelf
15˝ 7000041
18˝ 7000042
24˝ 7000043
30˝ 7000044
COMBINATION WIDTH PART NUMBERS
1X 6˝ Drawer2x Doors1x Shelf
30˝ 7000741
36˝ 7000742
42˝ 7000743
48˝ 7000744
12labs.iacindustries.com
35˝ Counter Height, continued
Eclipse™ Steel Casework
Drawers with Doored Cabinets, continued
COMBINATION WIDTH PART NUMBERS
2x 6˝ Split Drawers2x Doors1x Shelf
30˝ 7000401
36˝ 7000402
42˝ 7000403
48˝ 7000404
4x 6˝ Split Drawers2x Doors1x Shelf
30˝ 7000411
36˝ 7000412
42˝ 7000413
48˝ 7000414
4x 3˝ Split Drawers2x Doors1x Shelf
30˝ 7000421
36˝ 7000422
42˝ 7000423
48˝ 7000424
8x 3˝ Split Drawers2x Doors1x Shelf
30˝ 7000431
36˝ 7000432
42˝ 7000433
48˝ 7000434
COMBINATION WIDTH PART NUMBERS
1x Left Door1x Shelf
4x 6˝ Drawers on Right
30˝ 7000441
36˝ 7000442
42˝ 7000443
48˝ 7000444
4x 6˝ Drawers on Left
1x Right Door1x Shelf
30˝ 7000451
36˝ 7000452
42˝ 7000453
48˝ 7000454
1x 6˝ Drawer1x Left Door
1x Shelf3x 6˝ Drawers
on Right
30˝ 7000461
36˝ 7000462
42˝ 7000463
48˝ 7000464
1x 6˝ Drawer3x 6˝ Drawers
on Left1x Right Door
1x Shelf
30˝ 7000471
36˝ 7000472
42˝ 7000473
48˝ 7000474
13 labs.iacindustries.com
35˝ Counter Height, continued
Eclipse™ Steel Casework
Full Width Drawers
COMBINATION WIDTH PART NUMBERS
4x 6˝ Drawers
15˝ 7000201
18˝ 7000202
24˝ 7000203
30˝ 7000204
36˝ 7000205
42˝ 7000206
48˝ 7000207
2x 12˝ Drawers
15˝ 7000221
18˝ 7000222
24˝ 7000223
30˝ 7000224
36˝ 7000225
COMBINATION WIDTH PART NUMBERS
2x 6˝ Drawers1x 12˝
15˝ 7000211
18˝ 7000212
24˝ 7000213
30˝ 7000214
36˝ 7000215
Configure Online with IAC Lab DesignerSee the inside back cover to learn more about this fast and efficient tool to plan your laboratory furnishing.
14labs.iacindustries.com
35˝ Counter Height, continued
Eclipse™ Steel Casework
Combination Full and Split Drawers
COMBINATION WIDTH PART NUMBERS
4x 6˝ Drawers on Left
4x 6˝ Drawers on Right
30˝ 7000621
36˝ 7000622
42˝ 7000623
48˝ 7000624
8x 3˝ Drawers on Left
4x 6˝ Drawers on Right
30˝ 7000631
36˝ 7000632
42˝ 7000633
48˝ 7000634
4x 6˝ Drawers on Left
8x 3˝ Drawers on Right
30˝ 7000641
36˝ 7000642
42˝ 7000643
48˝ 7000644
2x 6˝ Split Drawers3x 6˝ Drawers
30˝ 7000651
36˝ 7000652
42˝ 7000653
48˝ 7000654
COMBINATION WIDTH PART NUMBERS
4x 6˝ Split Drawers2x 6˝ Drawers
30˝ 7000691
36˝ 7000692
42˝ 7000693
48˝ 7000694
8x 3˝ Split Drawers2x 6˝ Drawers
30˝ 7000721
36˝ 7000722
42˝ 7000723
48˝ 7000724
4x 3˝ Drawers on Left
2x 6˝ Drawers on Right
2x 6˝ Drawers
30˝ 7000701
36˝ 7000702
42˝ 7000703
48˝ 7000704
2x 6˝ Drawers on Left
4x 3˝ Drawers on Right
2x 6˝ Drawers
30˝ 7000711
36˝ 7000712
42˝ 7000713
48˝ 7000714
15 labs.iacindustries.com
Drawers with Doored Cabinets
COMBINATION WIDTH PART NUMBERS
1x 6˝ Drawer1x Left Door
1x Shelf
15˝ 7001031
18˝ 7001032
24˝ 7001033
30˝ 7001034
1x 6˝ Drawer1x Right Door
1x Shelf
15˝ 7001041
18˝ 7001042
24˝ 7001043
30˝ 7001044
COMBINATION WIDTH PART NUMBERS
2x 6˝ Split Drawers2x Doors1x Shelf
30˝ 7001401
36˝ 7001402
42˝ 7001403
48˝ 7001404
4x 3˝ Drawer2x Doors
30˝ 7001421
36˝ 7001422
42˝ 7001423
48˝ 7001424
Full Width Drawers
COMBINATION WIDTH PART NUMBERS
3x 6˝ Drawers
15˝ 7001201
18˝ 7001202
24˝ 7001203
30˝ 7001204
36˝ 7001205
42˝ 7001206
48˝ 7001207
COMBINATION WIDTH PART NUMBERS
1x 6˝ Drawer1x 12˝ Drawer
15˝ 7001211
18˝ 7001212
24˝ 7001213
30˝ 7001214
36˝ 7001215
29˝ Desk Height – ADA Compliant
Eclipse™ Steel Casework
16labs.iacindustries.com
Doored Cabinets Only
COMBINATION WIDTH PART NUMBERS
1x Left Door1x Shelf
15˝ 7001001
18˝ 7001002
24˝ 7001003
30˝ 7001004
1x Right Door1x Shelf
15˝ 7001011
18˝ 7001012
24˝ 7001013
30˝ 7001014
2x Doors1x Shelf
30˝ 7001021
36˝ 7001022
42˝ 7001023
48˝ 7001024
29˝ Desk Height – ADA Compliant
Eclipse™ Steel Casework
Drawers with Doored Cabinets, continued
COMBINATION WIDTH PART NUMBERS
1x Left Door3x 6˝ Drawers
on Right1x Shelf
30˝ 7001441
36˝ 7001442
42˝ 7001443
48˝ 7001444
3x 6˝ Drawers on Left
1x Right Door1x Shelf
30˝ 7001451
36˝ 7001452
42˝ 7001453
48˝ 7001454
Full Width Drawers, continued
COMBINATION WIDTH PART NUMBERS
2x 3˝ Drawers2x 6˝ Drawers
15˝ 7001241
18˝ 7001242
24˝ 7001243
30˝ 7001244
36˝ 7001245
42˝ 7001246
48˝ 7001247
Configure Online with IAC Lab DesignerSee the inside back cover to learn more about this fast and efficient tool to plan your laboratory furnishing.
17 labs.iacindustries.com
Knee Space Rail Aprons
WIDTH PART NUMBERS
18˝ 7000881
24˝ 7000882
30˝ 7000883
36˝ 7000884
42˝ 7000885
48˝ 7000886
60˝ 7000887
66˝ 7000888
72˝ 7000889
Casework Extras
Drawer Aprons
COMBINATION WIDTH PART NUMBERS
1x Drawer
18˝ 7000851
24˝ 7000852
30˝ 7000853
36˝ 7000854
42˝ 7000855
48˝ 7000856
COMBINATION WIDTH PART NUMBERS
2x Drawers
48˝ 7000861
54˝ 7000862
60˝ 7000863
66˝ 7000864
72˝ 7000865
Eclipse™ Steel Casework
18labs.iacindustries.com
Casework Extras, continued
Knee Space Filler Panels
WIDTH 29˝ HEIGHT 35˝ HEIGHT
18˝ 7000981 7000971
24˝ 7000982 7000972
30˝ 7000983 7000973
36˝ 7000984 7000974
42˝ 7000985 7000975
48˝ 7000986 7000976
Filler Panel
POSITION WIDTH 29˝ HEIGHT 35˝ HEIGHT
Rear
1˝ 7000931 7000901
7˝ 7000932 7000902
13˝ 7000933 7000903
Front
1˝ 7000951 7000921
2˝ 7000952 7000922
3˝ 7000953 7000923
4˝ 7000954 7000924
5˝ 7000957 7000925
6˝ 7000955 7000926
7˝ 7000956 7000927
Corner — 7000939 7000899
Island
8˝ 7000941 7000911
14˝ 7000942 7000912
20˝ 7000943 7000913
Eclipse™ Steel Casework
19 labs.iacindustries.com
Eclipse™ Wall Mount Cabinets
█ Multiple Sizes
█ Multiple Door Options
█ Adjustable Shelving
Add storage space with Eclipse Wall Mounted Cabinets. Made from heavy gauge steel, with finely applied powder coating paint.
Door styles include open door face, hinged glass/steel doors or glass/steel panel sliders.
Heights: 24˝, 30˝ and 36˝ Widths: 18˝, 24˝, 30˝, 36˝ or 42˝ Depth: 13˝ and 15˝ are Standard; 13˝ provides 12˝ of usable storage space; custom sizes available upon request.
Steel Doors
DESC. HEIGHT WIDTH PART NUMBERS
2x Doors2x Shelves
36˝
30˝ 7002523
36˝ 7002524
42˝ 7002525
48˝ 7002526
Sliding
DESC. HEIGHT WIDTH PART NUMBERS
2x Doors1x Shelf
24˝
30˝ 7002503
36˝ 7002504
42˝ 7002505
48˝ 7002506
30˝
30˝ 7002513
36˝ 7002514
42˝ 7002515
48˝ 7002516
20labs.iacindustries.com
Eclipse™ Wall Mount Cabinets
Single Hinged Door
DESC. HEIGHT WIDTH PART NUMBERS
1x Left Door1x Shelf
24˝
18˝ 7002001
24˝ 7002002
30˝ 7002003
30˝
18˝ 7002041
24˝ 7002042
30˝ 7002043
1x Left Door2x Shelves
36˝
18˝ 7002081
24˝ 7002082
30˝ 7002083
Steel Doors, continued
DESC. HEIGHT WIDTH PART NUMBERS
2x Doors2x Shelves
36˝
36˝ 7002324
42˝ 7002325
48˝ 7002326
Double Hinged Doors
DESC. HEIGHT WIDTH PART NUMBERS
2x Doors1x Shelf
24˝
36˝ 7002304
42˝ 7002305
48˝ 7002306
30˝
36˝ 7002314
42˝ 7002315
48˝ 7002316
DESC. HEIGHT WIDTH PART NUMBERS
1x Right Door1x Shelf
24˝
18˝ 7002011
24˝ 7002012
30˝ 7002013
30˝
18˝ 7002051
24˝ 7002052
30˝ 7002053
1x Right Door2x Shelves
36˝
18˝ 7002091
24˝ 7002092
30˝ 7002093
Configure Online with IAC Lab DesignerSee the inside back cover to learn more about this fast and efficient tool to plan your laboratory furnishing.
21 labs.iacindustries.com
Eclipse™ Wall Mount Cabinets
DESC. HEIGHT WIDTH PART NUMBERS
1x Right Door1x Shelf
24˝
18˝ 7002031
24˝ 7002032
30˝ 7002033
30˝
18˝ 7002071
24˝ 7002072
30˝ 7002073
1x Right Door2x Shelves
36˝
18˝ 7002111
24˝ 7002112
30˝ 7002113
Glass Doors
Hinged Single Door
DESC. HEIGHT WIDTH PART NUMBERS
1x Left Door1x Shelf
24˝
18˝ 7002021
24˝ 7002022
30˝ 7002023
30˝
18˝ 7002061
24˝ 7002062
30˝ 7002063
1x Left Door2x Shelves
36˝
18˝ 7002101
24˝ 7002102
30˝ 7002103
Hinged Double Doors
DESC. HEIGHT WIDTH PART NUMBERS
2x Doors1x Shelf
24˝
36˝ 7002334
42˝ 7002335
48˝ 7002336
30˝
36˝ 7002344
42˝ 7002345
48˝ 7002346
DESC. HEIGHT WIDTH PART NUMBERS
2x Doors2x Shelves
36˝
36˝ 7002354
42˝ 7002355
48˝ 7002356
22labs.iacindustries.com
DESC. HEIGHT WIDTH PART NUMBERS
2x Doors2x Shelves
36˝
30˝ 7002553
36˝ 7002554
42˝ 7002555
48˝ 7002556
DESC. HEIGHT WIDTH PART NUMBERS
2x Shelves 36˝
18˝ 7002721
24˝ 7002722
30˝ 7002723
36˝ 7002724
42˝ 7002725
48˝ 7002726
Glass Doors, continued
Open – No Doors
Double Sliding Door
DESC. HEIGHT WIDTH PART NUMBERS
2x Doors1x Shelf
24˝
30˝ 7002533
36˝ 7002534
42˝ 7002535
48˝ 7002536
30˝
30˝ 7002543
36˝ 7002544
42˝ 7002545
48˝ 7002546
Double Sliding Door
DESC. HEIGHT WIDTH PART NUMBERS
1x Shelf
24˝
18˝ 7002701
24˝ 7002702
30˝ 7002703
36˝ 7002704
42˝ 7002705
48˝ 7002706
30˝
18˝ 7002711
24˝ 7002712
30˝ 7002713
36˝ 7002714
42˝ 7002715
48˝ 7002716
Eclipse™ Wall Mount Cabinets
Configure Online with IAC Lab DesignerSee the inside back cover to learn more about this fast and efficient tool to plan your laboratory furnishing.
23 labs.iacindustries.com
Eclipse™ Reagent Rack – RA Shelving
Eclipse Reagent Racks and Shelving are the ideal solution for laboratory environments designed with the concept of adaptability, efficiency, durability and esthetic. These shelving systems provide the necessary storage and functionality for any laboratory environment. These adaptable systems independently adjust with many accessory options. Eclipse Reagent Racks accommodate the ergonomic needs of all lab workers.
Eclipse Reagent Racks and Shelving can be powder coated in a broad selection of standard or custom colors to match, or complement, your casework or lab table choices. Shelving on RA Racks are manufactured from cold-rolled
Extruded Aluminum Uprights Add Color to Match or Complement.Powder Coat Paint Colors
Accent Laminate Colors
HC MD
2930 31
steel to depth and length dimensions depending on your application and load capacity requirements. Standard upright height is 48˝; other customized heights and options are available upon request.
The Standard Electrical System for LABs (SES-Lab) is an electrical option that supplies a single 15 amp electrical circuit located on the metal trim panels of the RA Racks. This includes duplex outlets pre-installed on the inside trim panels of the rack upright supports. The Electrical components are pigtailed allowing power to be pulled from the top of the upright or from the bottom of the upright or underneath the upright.
The strength and versatility of Eclipse Reagent Racks is a result of our exclusive extruded aluminum uprights.
24labs.iacindustries.com
Eclipse™ Reagent Rack – RA Shelving
12˝ Deep Shelf
DEPTH LENGTH ALL STEEL LAMINATE SURFACE
12˝
30˝ 7004901 7004931
36˝ 7004902 7004932
42˝ 7004903 7004933
48˝ 7004904 7004934
54˝ 7004905 7004935
60˝ 7004906 7004936
66˝ 7004907 7004937
72˝ 7004908 7004938
Starter Unit
WIDTH NO ELECTRICAL WITH SES
30˝ 7004001 7004051
36˝ 7004002 7004052
42˝ 7004003 7004053
48˝ 7004004 7004054
54˝ 7004005 7004055
60˝ 7004006 7004056
66˝ 7004007 7004057
72˝ 7004008 7004058
Adder Unit
WIDTH NO ELECTRICAL WITH SES
30˝ 7004011 7004061
36˝ 7004012 7004062
42˝ 7004013 7004063
48˝ 7004014 7004064
54˝ 7004015 7004065
60˝ 7004016 7004066
66˝ 7004017 7004067
72˝ 7004018 7004068
Reagent Racks
Begin with a Starter Unit and attach Adder Units to extend the Reagent Rack to the length needed.
15˝ Deep Shelf
DEPTH LENGTH ALL STEEL LAMINATE SURFACE
15˝
30˝ 7004911 7004941
36˝ 7004912 7004942
42˝ 7004913 7004943
48˝ 7004914 7004944
54˝ 7004915 7004945
60˝ 7004916 7004946
66˝ 7004917 7004947
72˝ 7004918 7004948
18˝ Deep Shelf
DEPTH LENGTH ALL STEEL LAMINATE SURFACE
18˝
30˝ 7004921 7004951
36˝ 7004922 7004952
42˝ 7004923 7004953
48˝ 7004924 7004954
54˝ 7004925 7004955
60˝ 7004926 7004956
66˝ 7004927 7004957
72˝ 7004928 7004958
25 labs.iacindustries.com
LD-4 Adaptable Table
LD-4 Adaptable Laboratory Tables
LD-4 Adaptable Laboratory Tables
IAC has been a key manufacturer of steel laboratory furniture since 1991. Entry into the laboratory market was inspired by IAC’s award winning Dimension 4 (D4) Modular/Adjustable workstations. These versatile workstations were originally developed for markets apart from laboratory environments, however it wasn’t long before the laboratory managers and architects discovered the value and application of the D4 adaptability within lab environments.
This Dimension 4 adoption in labs inspired the design of the LD-4 Adaptable Tables that incorporate significant structural enhancements to support standard laboratory table tops (TRESPA/Phenolic Resin, Epoxy Resin, Stainless Steel, Chemsurf and of course standard Plastic Laminate).
LD-4 Adaptable Tables offer the diversification needed to furnish any laboratory environment, with a wide variety of sizes, finishes, shelving and storage options. The LD-4 is perfect for any laboratory, whether as a versatile standalone table, linked as continuous line, or configured as a double-sided island. There are really no limits with LD-4 Adaptable Tables.
26labs.iacindustries.com
Table Top Materials
Trespa® (Phenolic Resin)
The Trespa TopLab countertop is ideal for multi-purpose laboratories. Because of the countertop’s unique properties, including chemical and bacterial resistance, the Trespa can be utilized in analytical, microbial or chemical labs. Combined with these unique attributes, the Trespa TopLab countertop’s excellent physical and mechanical properties provide strength, toughness and durability to insure many years of useful service.
Epoxy Resin
Epoxy resin is the table top choice for harsh laboratory, classroom and research environments because of the material’s outstanding chemical resistance, durability, non-flammability, and non-absorbency
Chemsurf® - Chemical Resistant Laminate
Chemsurf® Chemical-Resistant Laminate is produced for work tops and cabinet surfacing in intermediate-type laboratories where weight or cost constraints rule out slate, epoxy or stainless steel; the possibility of chemical spills rules out conventional high-pressure decorative laminate; or where a trend-aware colored or patterned surface is desired. Chemsurf is also recommended in areas where indiscriminate use of a variety of cleaning agents may be used.
Stainless Steel
Stainless steel work surfaces offer a practical solution for high moisture areas, infection control considerations, radioisotope work and/or areas that are subject to fire and high abrasion. Stainless steel work surfaces are made from 16-gauge type 304 stainless steel with #3 finish. The underside of the work surfaces is reinforced with steel channels and covered with sound deadening material. All exposed welding is ground smooth and polished to match a No. 4 satin finish.
Standard Laminate
IAC uses only high pressure postforming horizontal grade laminates. All laminates are comply with federal specifications governing impact, abrasion and chemical resistance (FED Spec-L-P-508H).
ESD Laminate
Resistant measurements are used to establish the charge draining capacity of dissipative hard laminate. All table tops are tested for resistivity.
Surface to ground testing R (ohms): 1x106 minimum 1x109 maximum.
Surface to surface testing R (ohms): 1x106 minimum 1x109 maximum.
█ SES-L – Standard Electrical System LAB
█ Best suited for stand-alone applications.• Also suited for in-line applications with a separate power source for
each station
█ Integrates power into the workstation.
█ Supplies additional outlets located in the uprights.
█ Single 15 Amp, 120VAC circuit.
█ Each workstation will have 6 outlets located on the inside trim panel of each upright.• Same for single sided and double sided applications• Available on 60˝, 72˝, and 84˝ uprights
█ Electrical is pigtailed allowing power to be pulled from the top of the upright or from the bottom of the upright or underneath the upright.
█ When using in-line bench configurations:• Adder upright has outlets on both sides• Each side of adder upright is NOT connected to the other side
█ Duplex configured outlets are not flush with the trim panel.
█ Duplexes may affect location of accessories.
█ Accent/Trim panel is metal.
LD-4 Adaptable Laboratory Tables
Standard Electrical System – LAB (SES-LAB) Electrical
84˝
60˝
72˝
37˝37˝37˝
27 labs.iacindustries.com
Starter Unit
The Starter Unit is the first building block for a single-sided (meaning one table top) LD-4. The Starter Unit includes: two uprights, two table top support brackets, two table top beams (front and back), and one modesty panel.
LD-4 includes the frame only. Table top options are independently offered from the frame to allow freedom of choice. Table top material options are found on page 26.
WORKSTATION LENGTH DEPTH UPRIGHT
HEIGHTPART NUMBER
STANDARD SES-L
48˝
30˝
60˝ 7005001 7005105
72˝ 7005002 7005106
84˝ 7005003 7005107
36˝
60˝ 7005011 7005115
72˝ 7005012 7005116
84˝ 7005013 7005117
60˝
30˝
60˝ 7005031 7005135
72˝ 7005032 7005136
84˝ 7005033 7005137
36˝
60˝ 7005041 7005145
72˝ 7005042 7005146
84˝ 7005013 7005147
72˝
30˝
60˝ 7005061 7005165
72˝ 7005062 7005166
84˝ 7005063 7005167
36˝
60˝ 7005071 7005175
72˝ 7005072 7005176
84˝ 7005073 7005177
Add-on Unit
Add-on Units are used to extend laboratory islands or production lines. An Add-on Unit includes: one upright, one table top support bracket, two table top beams, and one modesty panel.
LD-4 Adders include the frame only. Table top options are independently offered from the frame to allow freedom of choice. Table top material options are found on page 26.
WORKSTATION LENGTH DEPTH UPRIGHT
HEIGHTPART NUMBER
STANDARD SES-L
48˝
30˝
60˝ 7005301 7005405
72˝ 7005302 7005406
84˝ 7005303 7005407
36˝
60˝ 7005311 7005415
72˝ 7005312 7005416
84˝ 7005313 7005417
60˝
30˝
60˝ 7005331 7005435
72˝ 7005332 7005436
84˝ 7005333 7005437
36˝
60˝ 7005341 7005445
72˝ 7005342 7005446
84˝ 7005343 7005447
72˝
30˝
60˝ 7005361 7005465
72˝ 7005362 7005466
84˝ 7005363 7005467
36˝
60˝ 7005371 7005475
72˝ 7005372 7005476
84˝ 7005373 7005577
Single-Sided Uprights
LD-4 Adaptable Laboratory Tables
28labs.iacindustries.com
Starter Unit
Double Sided Starter Units is the first building block for a double-sided (meaning there are two table tops, front and back) LD-4. The Starter Unit includes: two uprights, four table top support brackets, four table top beams (front and back), and two modesty panels.
LD-4 includes the frame only. Table top options are independently offered from the frame to allow freedom of choice. Table top material options are found on page 26.
WORKSTATION LENGTH DEPTH UPRIGHT
HEIGHTPART NUMBER
STANDARD SES-L
48˝
30˝
60˝ 7006011 7006115
72˝ 7006012 7006116
84˝ 7006013 7006117
36˝
60˝ 7006021 7006125
72˝ 7006022 7006126
84˝ 7006023 7006127
60˝
30˝
60˝ 7006041 7006145
72˝ 7006042 7006146
84˝ 7006043 7006147
36˝
60˝ 7006051 7006155
72˝ 7006052 7006156
84˝ 7006053 7006157
72˝
30˝
60˝ 7006071 7006175
72˝ 7006072 7006176
84˝ 7006073 7006177
36˝
60˝ 7006081 7006185
72˝ 7006082 7006186
84˝ 7006083 7006187
Add-on Unit
Double Sided add-on Units are used to extend laboratory islands or production lines. An Add-on Unit includes: one upright, two table top support brackets, four table top beams, and two modesty panels.
Double Sided LD-4 Adders include the frame only. Table top options are independently offered from the frame to allow freedom of choice. Table top material options are found on page 26.
WORKSTATION LENGTH DEPTH UPRIGHT
HEIGHTPART NUMBER
STANDARD SES-L
48˝
30˝
60˝ 7006311 7006415
72˝ 7006312 7006416
84˝ 7006313 7006417
36˝
60˝ 7006321 7006425
72˝ 7006322 7006426
84˝ 7006323 7006427
60˝
30˝
60˝ 7006341 7006445
72˝ 7006342 7006446
84˝ 7006343 7006447
36˝
60˝ 7006351 7006455
72˝ 7006352 7006456
84˝ 7006353 7006457
72˝
30˝
60˝ 7006371 7006475
72˝ 7006372 7006476
84˝ 7006373 7006477
36˝
60˝ 7006381 7006485
72˝ 7006382 7006486
84˝ 7006383 7006487
Double-Sided Uprights
LD-4 Adaptable Laboratory Tables
29 labs.iacindustries.com
Single Flipper Door – Cylinder Type Lock
16˝
14-1/2˝
LD-4 WIDTH PART NUMBER
48˝ 2050431
60˝ 2050432
72˝ 2050433
Sliding Door – Sliding Ratchet Type Lock
16˝
14-1/2˝
LD-4 WIDTH PART NUMBER
48˝ 2050461
60˝ 2050462
72˝ 2050463
Standard Overhead Storage Cabinets
Standard overhead storage cabinets attach between the uprights and provide horizontal storage for lab equipment, binders, books or anything needed to be easily accessible within arm’s reach. These cabinets can be mounted on either double sided or single sided units. LD-4 stations with Standard Electrical Systems (SES) must mounted cabinets 8˝ inches from top of upright to clear the top SES duplex (ask your Eclipse LAB Specialist for details).
Standard Sliding Door cabinets have laminate doors. Be sure to specify a color with your Eclipse LAB Specialist.
LD-4 Adaptable Laboratory Tables
Available with glass panels on request. Contact IAC.
LD-4 Metal Laboratory RA/Shelving
LD-4 RA/Shelving is adjustable and available in three depths. RA/Shelving is manufactured to prevent objects from sliding or slipping off. Each shelf will hold 75 lbs. of content, evenly distributed. These RA/Shelves are finished in chemical resistant epoxy powder coat paint to match the LD-4 color choices. Height adjustment is dependent on the height of the uprights you choose.
WORKSTATION LENGTH DEPTH PART NUMBER
48˝
12˝ 7004904
15˝ 7004914
18˝ 7004924
60˝
12˝ 7004906
15˝ 7004916
18˝ 7004926
72˝
12˝ 7004908
15˝ 7004918
18˝ 7004918
30labs.iacindustries.com
Metal/Magnetic Laboratory Isolation Screens
Metal and Fabric Isolation Screens partition between double sided stations, or along the rear of single sided stations.
█ Use magnets to post documents and drawings.
█ Finished in durable powder coat paint
LD-4 LENGTH HEIGHT
PART NUMBER
ALL SINGLE-SIDED DOUBLE-SIDED NO OVERHEAD STORAGE
48˝24˝ 2012711 2012791
36˝ 2012731 2012811
60˝24˝ 2012712 2012792
36˝ 2012732 2012812
72˝24˝ 2012713 2012793
36˝ 2012733 2012813
LD-4 LENGTH HEIGHT
PART NUMBER
DOUBLE-SIDED WITH OVERHEAD STORAGE
48˝16˝ 2012701
28˝ 2012721
60˝16˝ 2012702
28˝ 2012722
72˝16˝ 2012703
28˝ 2012723
Electrical Channel Assemblies
Electrical Channel with three, duplex outlets, on/off switch with pilot light, circuit breaker, and molded 8 ft. power cord. UL Listed.
LD-4 LENGTHPART NUMBER
15 AMP 20 AMP
36˝ 2012219 2012229
48˝ 2012211 2012222
60˝ 2012212 2012223
72˝ 2012213 2012224
UL®
20 Amp units require NEMA 20 Amp receptacles to accept plug. Will not plug into SES uprights.
LD-4 Adaptable Laboratory Tables
Increase the storage capacity of your LD-4 tables with any of a wide variety of our Lab-Grade suspended drawers and cabinets. Our Suspended Drawers and Cabinets match the manufacturing standards as Eclipse casework, including all of the same specifications in terms of the cabinet base with the exclusion of a toe kick. All necessary mounting hardware is included.
View Suspend Drawers and Cabinets on beginning on page 41.
Suspended Drawers & Cabinets
31 labs.iacindustries.com
Computer Accessories
Standard Keyboard Holder
█ Keyboard holder with textured black finish
█ Adjustable front to rear
█ Attaches to bottom of Instrumentation Platform
█ 18˝W x 2-3/4˝H x 9-1/4˝D (usable area)
█ 5 lb. weight capacity
P/N 2012633
Flat Panel Display Arm
█ Positions in two planes for optimum viewing angles
█ Universal VESA display mount
█ Extends a full 26 inches
█ Textured black finish
P/N 2012632
Keyboard Holder with Mouse Pad for Flat Panel Display
█ Holds keyboards up to 8˝ deep and 21˝ long
█ Mounts to IAC’s Flat Panel Display swing arm
█ Includes keyboard tray with non skid mat and extendable mouse holder that can be positioned to the right or left side of the keyboard tray.
█ Textured black finish
P/N 1022918
Instrumentation/Electronics Platform Swing Arm
█ 15˝ x 15˝, .75˝ thick with black T-molded edge
█ Rotates 360° on swing arm
█ Standard or ESD laminate top available
█ Please specify laminate color when ordering.
CAPACITYV DESCRIPTIONPART NUMBER
STANDARD LAMINATE
ESD LAMINATE
25 lbs.• Includes two pivoting 12˝ arms• Wide range of equipment positioning using double pivot• Mounts anywhere on upright using 12 gauge bracket
2012621 2012623
LD-4 Adaptable Laboratory Tables
32labs.iacindustries.com
Computer Accessories, continued
Slide-Out Universal CPU Holder
█ Safely suspends the CPU beneath the table top, on slide out mechanism
█ Prevents damage from dust, floor, moisture, vacuum cleaning or mops
█ Rugged metal construction, durable powder coated paint finish to match LD-4 frame
█ 28 lbs. capacity pulls out 12˝ and rotates 360°
P/N 2012639
Adjustable Keyboard Holder
9.5˝ 20.5˝
Extends9.5˝
11˝
█ Holds standard keyboard
█ Extends 9.5˝ on ball bearing mechanism
█ Attaches to underside of table top
█ Keyboard tray painted to match bench frame unless otherwise specified
P/N 2012634
Articulating Keyboard Holder
█ Mounts underneath table top
█ Designed for regular keyboard entry
█ Depth and angle adjustable for operator comfort
█ Reduces fatigue
P/N 2012636
Slide-Out Mouse Pad
█ Metal construction; durable powder coat paint finish
█ Slide mechanism permits easy access and storage
█ Mounts under Adjustable Keyboard Holder only (PN: 2012634) – left or right
█ Part painted to match Bench frame unless otherwise specified.
P/N 2012637
LD-4 Adaptable Laboratory Tables
33 labs.iacindustries.com
DesignAdaptable, Modular and flexible in design and concept (Versatility within any Laboratory environment).
█ System includes Starters and Adders.
█ Single (one table top) and Double Sided (two table tops).
█ Allows Custom Configurations/fully adaptable.
█ Ideally suited for in-line applications, islands, returns, adaptability and mobile functionality.• Cost effective and space saving when sharing common uprights
█ Can be used in stand-alone applications – the bench can include optional suspended cabinets, lab casework and/or overhead storage whether as a stand alone station or combined with other stations.
█ Build-a-bench concept• Basic unit consists of 2 uprights, support brackets, front and rear
support beams and hardware
█ Total workstation capacity is 750# static load, evenly distributed.
█ This system is a sold as a frame only, providing options for different types of chemical resistant specialty surfaces.
Uprights █ Unique two-piece extruded aluminum construction.• 60-63 T5 Aluminum alloy• 80/1000 – 125/1000˝ thick wall construction• 14 gauge connector brackets strengthen connections between
upright extrusions
█ Standard Heights: 60˝, 72˝, 84˝
█ Captive nutway in aluminum provides infinite adjustment points for accessories – remember to review your electrical outlet placement when thinking about positioning accessories along uprights.
█ Milled nutway ports provide easy assembly and accessory add-on at a later date.
█ Uprights securely bolted to custom 2˝ x 3˝ aluminum base support.• Floor glides provide workstation leveling adjustment
█ 12˝ deep upright• Two piece construction allows flexibility, depending on requirement• 3.6˝ X 1.8˝ internal clearance allows for hidden air, data cables, other
utilities• Integrated electrical systems available (See PDS-II and SES-L
sections)
█ Slide-in accent/trim strips provide contrast color in uprights.• Trim panels are laminate – exception: LD-4 Standard Electrical
System (SES-L) uses a metal trim panel for the electrical components
█ Plastic top and end caps provide finished appearance.
Frame Assembly █ Single sided stations have a 16 Gauge 13˝ high modesty panel that attaches to each upright.• Provides rigid and square foundation for the bench
█ Pair of 12 gauge formed steel table top brackets.
█ 2 each 16 GA table top supports beams.• Provide lateral support• Provide support for suspended drawers, cabinets
█ Manual height adjustment is standard.
█ Hydraulic hand crank and motorized height adjustment is an option.• Adjustability range can be changed when an application changes• Adjustable height options can be retrofitted to standard LD-4 station
in the field
█ Infinitely positioned on the uprights using 5/16˝ square head bolts.
█ Frame color matches paint selection for the uprights.
Laboratory grade table top options █ Standard Lengths: 48˝, 60˝, 72˝
█ Standard Depths: 30˝, 36˝
█ All table tops are options.
█ Single sided (one table top) & double sided (two table tops).
█ Overall bench length is 2-1/8˝ longer than table top.
█ Edge of table top comes to the middle of the upright.• When used in starter and adder in-line stations, table top edges are
flush together
█ Lab-top Trespa .75 thick table tops.• Supplied with silicone for attachment to LD-4 frame
█ Epoxy Resin 1˝ thick table tops.• Supplied with silicone for attachment to LD-4 frame
█ Many specialty table tops available.
Suspended Drawers & Cabinets █ Many Configurations of Eclipse Laboratory Grade Steel Casework can be suspended from LD-4 tables. The following specifications are for standard LD-4 cabinets, for suspended casework please contact your Eclipse Laboratory Specialist or reference the casework section of this catalog or online.
█ Standard (Non-Casework) LD-4 Suspended Cabinets• All standard metal construction using 20, 16 & 14 gauge formed
steel• Standard cabinets have safety recessed handles on all drawers and
cabinets• Standard cabinets have 100# full extension rating, spring loaded
“easy close” action• Standard cabinets are easily reconfigured with removable slides• Standard cabinets mount anywhere along front beam with provided
specialty brackets below table top (left/right/center)• Standard cabinets provide functional and cost effective storage
below the table top• Standard single drawers are stackable for various configurations
LD-4 Specifications
LD-4 Adaptable Laboratory Tables
34labs.iacindustries.com
• Standard Single drawers include lock cylinder• Standard cabinets have optional locking mechanism available for
most suspended cabinets• Standard cabinets will require you to specify whether locks are to be
keyed alike or differently
LD-4 Standard Overhead Storage Cabinets █ Many configurations of laboratory grade wall mounted cabinets can be mounted between the uprights of the LD-4 tables. The following specifications are for standard (non-wall mounted cabinet derivatives) LD-4 cabinets, for overhead secured laboratory wall cabinetry please contact your Eclipse Laboratory Specialist.
█ Standard LD-4 (non-wall mounted cabinet derivatives) Overhead Cabinets• Standard overhead cabinets Lengths: 48˝, 60˝, and 72˝• Standard overhead cabinets have Single Door, Double Door, and
Sliding Door configurations available• Standard overhead cabinets are all metal construction using 20, 16
& 14 gauge formed steel• Ideal for storage above the table top• Overhead storage door includes lock(s)• Locks can be keyed to match suspended drawers and cabinets -
excluding cabinets with sliding doors• Standard cabinet sliding door model does includes “Jewelry Case”
lock• Standard cabinet outside Dimensions: 16˝H x 14˝D x 48˝, 60˝, or 72˝L• Standard cabinets inside usable space is 12.5˝H x 13.5˝D• Standard cabinets door slides up and out of the way (side to side on
sliding door models)• Standard cabinets include two recessed handles on door for easy
use• Standard cabinets can be positioned anywhere along the uprights
9 Remember to review where your electrical outlets are placed• Can be painted all standard colors
LD-4 Corner Table Top & Shelf Assemblies █ Corner tops & shelves available in radius and square back treatments.
█ Available in standard laminate, Trespa and Epoxy Resin.
█ Corner tops supported by 12 GA support brackets that are adjustable the same as the table tops.
█ Corner shelves supported by 12 GA shelf brackets that attach to the uprights and are adjustable up and down.
█ Radius corner tops have a 150lbs weight capacity, evenly distributed.
█ Radius corner shelves have a 75 lbs weight capacity, evenly distributed.
█ Square corner tops and shelves include an adjustable rear tube supports.
█ Square corner tops have a 350 lbs weigh capacity, evenly distributed.
█ You can suspend cabinetry with special size corner and support frame – please contact your Eclipse Laboratory Specialist for additional information.
LD-4 Shelving █ Provides storage area off the table top.• Can be positioned anywhere between the uprights
█ Depths: 12˝, 15˝, 18˝
█ Lengths: 48˝, 60˝, 72˝
█ Heavy gauge formed steel shelf with lip• 75# Standard capacity• Shelves include a front and rear lip 1.4˝ high
█ 14 gauge brackets
█ Shelf can be mounted in front or back nutway for further positioning options.
Standard Electrical System – LAB (SES-LAB) Electrical █ SES-L – Standard Electrical System LAB
█ Best suited for stand-alone applications.• Also suited for in-line applications with a separate power source for
each station
█ Integrates power into the workstation.
█ Supplies additional outlets located in the uprights.
█ Single 15 Amp, 120VAC circuit
█ Each workstation will have 6 outlets located on the inside trim panel of each upright.• Same for single sided and double sided applications• Available on 60˝, 72˝, and 84˝ uprights
█ Electrical is pigtailed allowing power to be pulled from the top of the upright or from the bottom of the upright or underneath the upright.
█ When using in-line bench configurations:• Adder upright has outlets on both sides• Each side of adder upright is NOT connected to the other side
█ Duplex configured outlets are not flush with the trim panel.
█ Duplexes may affect location of accessories.
█ Accent/Trim panel is metal.
PDS-II Electrical █ PDS-II – Power Distribution System II
█ Best suited for in-line applications.
█ UL Listed as part of workstation (UL 962 / File # E113928).
█ Integrates 4 independent 20 Amp circuits into the workstation.• Totaling 80 Amps of power per PDS Power-up connection
█ Four 15-amp (20-amp optional) duplexes above the table top.• Two on each side of 60˝, 72˝, and 84˝ uprights• One on each side of 48˝ uprights• Not available on 36˝ uprights
█ Uprights are interconnected below table top with molded interconnect cord.
█ Each duplex receptacle numbered “1”, “2”, “3”, & “4”.• Numbered receptacle only accesses that numbered circuit
█ Duplex configured outlets are flush with the trim panel.
LD-4 Adaptable Laboratory Tables
35 labs.iacindustries.com
█ 7-Wire power up cable must be ordered separately.• A skilled electrical technician will need to hard-wire the system• Power “drop” per 80 Amps of electrical usage
█ Any or all circuits can be turned off at the power source.• Allows some circuits to be on or off at any time
█ Same for single sided or double sided stations.
█ Accent/Trim panels are laminate.
LD-4 Standard Electrical Channel █ UL Listed (UL 163 / File # E173487)
█ Lengths: 36˝, 48˝, 60˝, 72˝
█ 36˝ channel include 2 duplex outlets, 15 Amp Rating at 120VAC.
█ 48˝, 60˝, 72˝ include three duplex outlets, 15 Amp Rating at 120VAC.• 20 Amp version also available
█ Power switch and pilot light included.
█ 8’ Molded power cord
█ Aluminum Channel mounts to uprights with 14 Gauge brackets.• Height and depth adjustable
█ Suspended between uprights, not mounted to table top.
█ Positional where electrical access is needed.
Laboratory Grade Ergonomic Parts Cup Rail █ Lengths: 48˝, 60˝, 72˝
█ Accepts laboratory standard parts cups.
█ Heavy duty construction using IAC universal extruded aluminum rail and mounted by 14 gauge mounting brackets.
█ Powder-coated surface• Standard version is textured black painted
█ Height adjustable within infinite upright slots.
█ Depth adjustable within slotted brackets.
█ Easy twist-knob adjustment.
█ Offers all of the above adjustability features.
█ Adds angle adjustment capability via Phillips set screws on side of rail.
█ Tilts bins at an ergonomic angle for ease of reach and parts access.
Standard Footrest █ Ergonomic benefits for sitting and standing applications.• Helps to reduce worker stress
█ Lengths: 48˝, 60˝, 72˝
█ 1˝ bright zinc plated “U” shaped tube.
█ 12 gauge textured black painted brackets.
█ Mounts between the uprights.• Easy retrofit• Manually adjusts up and down / in and out
█ Supports Ergo Foot Pan.
Ergo Footrest █ Ergonomic benefits for sitting and standing applications.• Helps to reduce worker stress
█ Lengths: 48˝, 60˝, 72˝
█ 1˝ bright zinc plated “U” shaped tube.
█ Unique 14 gauge ratcheting textured black painted brackets.• Click-latch rollers at each end
█ Mounts between the uprights.• Easy retrofit
█ “Hands-Free” height adjustment (up/down).• 9˝ height adjustment range
█ Provides optimum comfort angle.
█ Manually adjusts in and out.
█ Supports Ergo Foot Pan.
█ Promotes good housekeeping – can be raised for cleaning under the bench.
█ REMEMBER: Footrest or Rail may interfere with suspended or mobile cabinets. Ensure that you double check your specification and approval drawings.
Ergo Foot Pan █ Ergonomic benefits for sitting and standing applications.• Assures proper body weight distribution• Provides non-slip platform for use
█ Attaches to standard or ergo footrest tube using plastic C-clamps.
█ Adjustable angle provides optimum comfort.
█ 16 gauge formed pan• Dimensions: 8˝ high x 36˝ long
█ Painted same color as bench.
█ Rounded corners provide safe edges for operators.
Free Standing Footrest █ Provides a stable floor for seated or standing workers.
█ Can be moved where needed.
█ Same hands free operation as ergo footrest.
█ Adjusts from 2.75˝ to 11.5˝ from floor.
█ 14 gauge base measures 15˝ x 28.5˝ – Includes non-skid rubber feet.
█ Pan has non-skid surface.
█ Pan tilts in continuous movement for optimum comfort angle.
█ Textured black painted finish.
█ Rounded corners provide safe edges for operators.
Lighting █ Full length Accessory
█ Standard Lengths: 48˝, 60˝, 72˝
█ UL Listed (UL 153 / File # E162554)
█ Light Tubes NOT included.
LD-4 Adaptable Laboratory Tables
36labs.iacindustries.com
█ Electronic Ballast• Operates above 20,000 Hz and eliminates 60 cycle hum and flicker
█ Adjustability• Up/down within infinite upright design• In/out within slotted brackets• Angle (tilts on axis) - for optimum light direction
█ Heavy Duty 14 gauge brackets support the light fixture.
█ Hand knobs lock light fixture at desired angle.
█ Prismatic lens diffuser included with the standard light fixture.• Direct egg-crate diffuser available
9 Directs light more vertically toward the table top than the prismatic
• Parabolic egg-crate diffuser available 9 Directs light vertically even more toward the workstation than the DOL
█ Standard Fixture• Ideal for environments with good ambient light and when application
requires 100 to 110 foot candles of cool light
█ High-Output Fixture• Two tube fixture• Increases the foot candle output approximately 20% depending on
diffuser• Ideal for environments with low ambient light
█ 3-Tube Fixture• 3-Tube fixture can use 1, 2, or all 3 tubes at one time via selector
switch • Up to 195 foot candles of light depending on diffuser• Light tubes stacked in the center of the fixture, not end to end
█ Molded power cord• 8’ and 2’ cord lengths available• Specify 2’ cords for PDS and SES-L applications
█ Convenient power switch at front of light.
█ Custom built light housing.
█ Suggested 48˝L Light Tubes:• Fixture length 48˝ – F25 RS T8 SP41 (or SPX41)• Fixture length 60 or 72˝ – F32 RS T8 SP41 (or SPX41)• LED specs:
9 48˝ fixture LIGHT TUBE,LED 36L T8-12W-NWC 120-277V 9 60˝ fixture LIGHT TUBE,LED 48L T8-17W-NWC 120V-277V 9 72˝ fixture LIGHT TUBE,LED 60L T8-19W-NWC 120-277V
LD-4 Adaptable Laboratory Tables
37 labs.iacindustries.com
LAB TablesEclipse LAB Tables are available in fixed heights of 30˝ and 36˝ (with typical 1˝ thick tops –sold separately – in place).These tables are provided as “frame-only”, allowing you to choose from a broad selection of specialty table tops. See page 39.
LAB Tables have standard depths of 24˝, 30˝ and 36˝ deep.
LAB Tables
Available Options █ A broad selection of modesty and side panels
█ Back splashes
█ Casters to make tables mobile
█ Leveling floor glides
█ Suspended Drawers and Cabinets — See Page 41
█ Mobile Cabinets (typical for lab tables); Eclipse, lab-grade
casework with high quality swivel casters. — See Page 41
Please contact your Eclipse LAB Specialist for additional options.
Standard Adjustable Height LAB Table shown with powder coat paint finish and optional epoxy resin top surface.
36” Fixed Height LAB Table shown with optional side panels, powder coat paint finish and optional stainless steel top surface.
LAB Table shown with optional adjustable height casters, powder coat paint finish and optional Chemsurf® laminate top surface.
38labs.iacindustries.com
█ Table beams are 3˝ high
█ Standard Table Legs Are:• H-Leg Design with 16 gauge 2˝ x 2˝ tubing, with a 16 gauge spreader
welding both legs together• Each leg as 5-16/18 levelers with 1-3/4˝ diameter nylon base –
Adjustable to 1-1/4˝ in height
HEIGHT* DEPTH LENGTH PART NUMBER
30˝-36˝Adjustable Height
Legs
24˝
48˝ 7007001
60˝ 7007002
72˝ 7007003
96˝ 7007005
30˝
48˝ 7007011
60˝ 7007012
72˝ 7007013
96˝ 7007015
36˝
48˝ 7007021
60˝ 7007022
72˝ 7007023
96˝ 7007025
36˝
24˝
48˝ 7007201
60˝ 7007202
72˝ 7007203
96˝ 7007205
30˝
48˝ 7007211
60˝ 7007212
72˝ 7007213
96˝ 7007215
36˝
48˝ 7007221
60˝ 7007222
72˝ 7007223
96˝ 7007225
30˝
24˝
48˝ 7007231
60˝ 7007232
72˝ 7007233
96˝ 7007235
30˝
48˝ 7007241
60˝ 7007242
72˝ 7007243
96˝ 7007245
36˝
48˝ 7007251
60˝ 7007252
72˝ 7007253
96˝ 7007255
*Height value approximates finished height with top in place.
PANEL UPGRADE FRAME HEIGHT
FRAME DEPTH PART NUMBER
1 End Panel Upgrade
30˝-36˝ Adjustable
Height
24˝ 7007071
30˝ 7007072
36˝ 7007073
36˝
24˝ 7007261
30˝ 7007262
36˝ 7007263
30˝
24˝ 7007281
30˝ 7007282
36˝ 7007283
2 End Panel Set Upgrade
30˝-36˝ Adjustable
Height
24˝ 7007081
30˝ 7007082
36˝ 7007083
36˝
24˝ 7007271
30˝ 7007272
36˝ 7007273
30˝
24˝ 7007291
30˝ 7007292
36˝ 7007293
Lab Tables
Frames End Panel Upgrades — Order in addition to Frame
End panels must be ordered with a frame. Panels are not sold separately.
Caster Upgrades — Order in addition to Frame
For upgrades to 30˝-36˝ Adjustable Height Frames only. 4-inch caster (5-inch overall height) mounted on leg extender for workbench legs. Provides 6 inches of height adjustment.
• 750 lbs. maximum
FRAME DEPTH PART NUMBER
24˝ 7007091
30˝ 7007092
36˝ 7007093
LAB Tables
39 labs.iacindustries.com
LAB Tables
Tops for Lab Tables
Trespa® Phenolic Resin █ 1˝ Thick
Chemsurf® Laminate █ 1˝ Thick
Standard Laminate █ 1˝ Thick
Stainless Steel █ 1.25˝ Thick
Epoxy – Black █ 1˝ Thick
MATERIAL DEPTH LENGTH PART NUMBER
Trespa®(Black)
24˝
48˝ 7007501
60˝ 7007502
72˝ 7007503
96˝ 7007505
30˝
48˝ 7007511
60˝ 7007512
72˝ 7007513
96˝ 7007515
36˝
48˝ 7007521
60˝ 7007522
72˝ 7007523
96˝ 7007525
MATERIAL DEPTH LENGTH PART NUMBER
Stainless Steel
24˝
48˝ 7007621
60˝ 7007622
72˝ 7007623
96˝ 7007625
30˝
48˝ 7007631
60˝ 7007632
72˝ 7007633
96˝ 7007635
36˝
48˝ 7007641
60˝ 7007642
72˝ 7007643
96˝ 7007645
MATERIAL DEPTH LENGTH PART NUMBER
Epoxy(Black)
24˝
48˝ 7007531
60˝ 7007532
72˝ 7007533
96˝ 7007535
30˝
48˝ 7007541
60˝ 7007542
72˝ 7007543
96˝ 7007545
36˝
48˝ 7007551
60˝ 7007552
72˝ 7007553
96˝ 7007555
MATERIAL DEPTH LENGTH PART NUMBER
Chemsurf® Laminate
24˝
48˝ 7007591
60˝ 7007592
72˝ 7007593
96˝ 7007595
30˝
48˝ 7007601
60˝ 7007602
72˝ 7007603
96˝ 7007605
36˝
48˝ 7007611
60˝ 7007612
72˝ 7007613
96˝ 7007615
MATERIAL DEPTH LENGTH PART NUMBER
Standard Laminate
24˝
48˝ 7007561
60˝ 7007562
72˝ 7007563
96˝ 7007565
30˝
48˝ 7007571
60˝ 7007572
72˝ 7007573
96˝ 7007575
36˝
48˝ 7007581
60˝ 7007582
72˝ 7007583
96˝ 7007585
• Complies with federal specifications governing impact, abrasion and chemical resistance (FED Spec-L-P-508H).
• Conforms to ANSI/NEMO LD3-2005 for HGP postforming laminate.
22 - Black
37 - White
06 - Dove Gray
34 - Gray
01 - LoGlare White
21 - Black
Standard Laminate Detail
Chemsurf® Laminate Detail
40labs.iacindustries.com
Computer Accessories
Slide-Out Universal CPU Holder
█ Safely suspends the CPU beneath the table top, on slide out mechanism
█ Prevents damage from dust, floor, moisture, vacuum cleaning or mops
█ Rugged metal construction, durable powder coated paint finish to match LD-4 frame
█ 28 lbs. capacity pulls out 12˝ and rotates 360°
P/N 2012639
Adjustable Keyboard Holder
9.5˝ 20.5˝
Extends9.5˝
11˝
█ Holds standard keyboard
█ Extends 9.5˝ on ball bearing mechanism
█ Attaches to underside of table top
█ Keyboard tray painted to match bench frame unless otherwise specified
P/N 2012634
Articulating Keyboard Holder
█ Mounts underneath table top
█ Designed for regular keyboard entry
█ Depth and angle adjustable for operator comfort
█ Reduces fatigue
P/N 2012636
Slide-Out Mouse Pad
█ Metal construction; durable powder coat paint finish
█ Slide mechanism permits easy access and storage
█ Mounts under Adjustable Keyboard Holder only (PN: 2012634) – left or right
█ Part painted to match Bench frame unless otherwise specified.
P/N 2012637
Lab Tables
41 labs.iacindustries.com
Suspended and Mobile Drawers and Cabinets
Suspended Drawers and Cabinets
Lab-Grade Suspended Drawers and Cabinets are available for both the LD-4 Adapatable Tables and standard Lab Tables. They are available in multiple sizes and drawer/cabinet combinations to suit all storage needs. Built with same features and care as our Eclipse Casework.
Features █ Available in widths of 18˝, 24˝ and 30˝
█ Seamless, fully welded enclosure.
█ Sound deadened drawers doors with foam-filled, double-walled construction.
█ Drawer and door pull handles are brushed, anodized aluminum.
█ Single-piece construction drawer bodies; no horizontal seams.
18˝-wide units are ideal for retaining seating positions. Wider units are designed to provide maximum storage for tables used while standing.
█ Stainless steel door hinges.
█ Fully extending 20˝ deep drawers, with “easy-close” steel glides
█ Fully closed top and bottom surfaces.
█ Finished in durable, powder-coat paint to match table color.
IMPORTANT: Due to height constraints these Suspended Drawers and Cabinets will not fit under 30˝ Fixed Height tables. They may be used on the Adjustable Height tables, but will limit the lowest height position.
Eclipse Mobile Laboratory Grade Cabinets
█ 3” swivel plate casters: gray Performa rubber wheels; Chrome Hood (Locks on front casters).
█ Available in widths of 18″, 24″ and 30″. █ Fully closed top and bottom surfaces.
█ Fully boxed, sound dampened doors and drawers.
Laboratory Grade Mobile Cabinets offer an convenient way to move equipment, tools, beakers and documents anywhere within your laboratory environment, providing complete mobility. All built with the same quality measures as our Eclipse casework.
42labs.iacindustries.com
Suspended Drawers and Cabinets
Suspended Drawers and CabinetsSuspended – Drawers and Cabinet Combinations
Suspended – Cabinet Only – With Door
1x 4˝ Drawer + 1x 20˝ Door
1x 4˝ Drawer + 1x 7 ˝ Drawer + 1x 20˝ Door
2x 4˝ Drawer + 2x 20˝ Doors
2x 4˝ Drawer + 2x 20˝ Doors
2x 4˝ Drawer + 2x 7 ˝ Drawer + 2x 20˝ Doors
MOUNT WIDTH PART NUMBER
Left
18˝ 7008032
24˝ 7008033
30˝ 7008034
MOUNT WIDTH PART NUMBER
Left
18˝ 7008072
24˝ 7008073
30˝ 7008074
MOUNT WIDTH PART NUMBER
Center 30˝ 7008021
MOUNT WIDTH PART NUMBER
Right
18˝ 7008042
24˝ 7008043
30˝ 7008044
MOUNT WIDTH PART NUMBER
Right
18˝ 7008082
24˝ 7008083
30˝ 7008084
1x 24” Door
MOUNT WIDTH PART NUMBER
Left
18˝ 7008002
24˝ 7008003
30˝ 7008004
MOUNT WIDTH PART NUMBER
Right
18˝ 7008012
24˝ 7008013
30˝ 7008014
WIDTH PART NUMBER
30˝ 7008401
WIDTH PART NUMBER
30˝ 7008411
43 labs.iacindustries.com
Suspended Drawers and Cabinets
Suspended – Drawers Only
3x 4˝ + 2x 7˝ Drawers 3x 4˝ +1x 14˝ Drawers 1x 4˝ + 1x 7˝ + 1x 14˝ Drawers
1x 4˝ + 3x 7˝ Drawers
Suspended Drawers and Cabinets
WIDTH PART NUMBER
18˝ 7008252
24˝ 7008253
30˝ 7008254
WIDTH PART NUMBER
18˝ 7008232
24˝ 7008233
30˝ 7008234
WIDTH PART NUMBER
18˝ 7008192
24˝ 7008193
30˝ 7008194
WIDTH PART NUMBER
18˝ 7008212
24˝ 7008213
30˝ 7008214
WIDTH PART NUMBER
18˝ 7008202
24˝ 7008203
30˝ 7008204
Suspended – Open Cabinet – No Doors
█ Shelf is adjustable.
44labs.iacindustries.com
Mobile Drawers and Cabinets
Mobile Drawers and CabinetsMobile – Drawers and Cabinet Combinations
Mobile – Cabinet Only – With Door
1x 4˝ Drawer + 1x 20˝ Door
1x 4˝ Drawer + 1x 7 ˝ Drawer + 1x 20˝ Door
2x 4˝ Drawer + 2x 20˝ Doors
2x 4˝ Drawer + 2x 20˝ Doors
2x 4˝ Drawer + 2x 7 ˝ Drawer + 2x 20˝ Doors
MOUNT WIDTH PART NUMBER
Left
18˝ 7008532
24˝ 7008533
30˝ 7008534
MOUNT WIDTH PART NUMBER
Left
18˝ 7008572
24˝ 7008573
30˝ 7008574
WIDTH PART NUMBER
30˝ 7008651
WIDTH PART NUMBER
30˝ 7008661
MOUNT WIDTH PART NUMBER
Center 30˝ 7008521
MOUNT WIDTH PART NUMBER
Right
18˝ 7008542
24˝ 7008543
30˝ 7008544
MOUNT WIDTH PART NUMBER
Right
18˝ 7008582
24˝ 7008583
30˝ 7008084
1x 24” Door
MOUNT WIDTH PART NUMBER
Left
18˝ 7008502
24˝ 7008503
30˝ 7008504
MOUNT WIDTH PART NUMBER
Right
18˝ 7008512
24˝ 7008513
30˝ 7008514
45 labs.iacindustries.com
Mobile – Drawers Only
3x 4˝ + 2x 7˝ Drawers 3x 4˝ +1x 14˝ Drawers 1x 4˝ + 1x 7˝ + 1x 14˝ Drawers
1x 4˝ + 3x 7˝ Drawers
WIDTH PART NUMBER
18˝ 7008752
24˝ 7008753
30˝ 7008754
WIDTH PART NUMBER
18˝ 7008732
24˝ 7008733
30˝ 7008734
WIDTH PART NUMBER
18˝ 7008192
24˝ 7008193
30˝ 7008194
WIDTH PART NUMBER
18˝ 7008712
24˝ 7008713
30˝ 7008714
WIDTH PART NUMBER
18˝ 7008702
24˝ 7008703
30˝ 7008704
Mobile – Open Cabinet – No Doors
█ Shelf is adjustable.
Mobile Drawers and Cabinets
46labs.iacindustries.com
Finish Off Your LabWith these great products available through IAC.
As you design your laboratory you will often require more than the Eclipse Laboratory Grade Steel Furniture cataloged in this brochure. IAC can support you with a wide variety of products from other manufactures, designed to integrate with Eclipse laboratory furniture. Some of these are highlighted on the following pages. Feel free to include these products during discussions with your Eclipse Laboratory Manager.
Fume Hoods and EnclosuresWhether your needs are light duty or more robust fume hood systems. We offer solutions for general chemistry, educational, filtered, floor mounted, nuisance vapors, systems for toxic fumes or more specialized applications.
Glassware Washers & Water Purification SystemsChoose from a broad selection of glassware washer and water purification systems. These systems accommodate a wide variety of glassware shapes and sizes – from beakers and wide-mouth glassware to narrow-necked glassware – and systems with monitoring and control features that benefit contamination-sensitive research.
Laboratory Service Fixtures
Mixing faucets, pure water faucets, eyewash centers, electrical fixtures, and more.
SinksDrop sinks are available in both Epoxy and Stainless Steel models, in a variety of sizes.
Biological Safety Cabinets & EnclosuresThese enclosures provide protections from hazardous particulates that require biosafety conditions to be met; typically biosafety level 1, 2 or 3 containment. These are ideal for procedures that generate fine dust or other type’s contaminants.
Eclipse Optional Equimpent
47 labs.iacindustries.com
IAC makes it possible for anyone furnishing a lab to quickly specify casework and cabinets to fill their unique space. The Eclipse LAB Designer is a live, interactive online tool for easy lab space planning. It all happens within minutes.
Visit online, design your lab and receive a free no obligation quote of the specification submitted within 24 hours. It’s fast, very easy, and extremely useful for anyone tasked with furnishing a laboratory.
If you know the general dimensions of the lab to be furnished, you are ready to design! Simply choose from the broad selection of casework and/or wall cabinet models and sizes. As you design your furnishing layout, you can easily reposition, change or delete products within the build area. The LAB Designer provides options for “spacers” to allow for doors, windows, or other lab equipment for casework and/or wall cabinets to be built around. Save up to four wall designs within one single planning session.
Lab Designer Choices Include █ Counter-height Eclipse casework (35˝ tall)
█ Desk-height Eclipse Casework (29˝ tall)
█ Trespa® , Epoxy Resin, Stainless Steel, Chemsurf®, hardwood Maple Butcher Block or Static Dissipative Laminate counter tops
█ Wall Mounted Cabinetry with open door face, hinged glass/steel doors or glass/steel panel sliding doors.
DRAWING/QUOTE #: EC-28949-1
TO ORDER: CONTACT IAC INDUSTRIES SALES AT [email protected],OR (714) 990-8997. SUPPLY THE DRAWING/QUOTE NO. SHOWN ABOVE.
ALL DRAWINGS AND SPECIFICATIONS ARE PROPRIETARY TO IAC INDUSTRIES, AND THEY ARE NOT TO BEREPRODUCED OR USED IN ANY DESIGN WITHOUT THE EXPRESS, WRITTEN CONSENT OF IAC INDUSTRIES.
132″ OVERALL LENGTH
132″ OVERALL LENGTH
SELECTED WALL CABINETSPRODUCTS LISTED IN ORDER FROM LEFT TO RIGHT ON THE DRAWING ABOVE.
SELECTED CASEWORKPRODUCTS LISTED IN ORDER FROM LEFT TO RIGHT ON THE DRAWING ABOVE.
DESCRIPTION WIDTH PART NUMBERLAB WALL CABINET 30H15D36L MTL DHD 36″ 7002314LAB WALL CABINET 30H15D24L MTL DR S1 24″ 7002052DRYING RACK 36″ SPACER-36LAB WALL CABINET 30H15D36L MTL DHD 36″ 7002314
DESCRIPTION WIDTH PART NUMBERLAB CAB A3536 DD S1 36″ 7000022DISHWASHER 24″ SPACER-24LAB CAB A3536 SBV DD 36″ 7000352LAB CAB B3536 B2 DD S1 36″ 7000402
COUNTERTOP MATERIALTRESPA(R) / PHENOLIC RESIN
OTHER PRODUCTS OF INTEREST
CUSTOMERINFORMATION
COMPANY ABC LABS
NAME JIM JONES
PHONE 787-321-1234
EMAIL [email protected]
COMMENTS
TITLE
NORTH WALL
DRAWING NUMBER
EC-28949-1
DRAWING/QUOTE #: EC-28949-1
TO ORDER: CONTACT IAC INDUSTRIES SALES AT [email protected],OR (714) 990-8997. SUPPLY THE DRAWING/QUOTE NO. SHOWN ABOVE.
ALL DRAWINGS AND SPECIFICATIONS ARE PROPRIETARY TO IAC INDUSTRIES, AND THEY ARE NOT TO BEREPRODUCED OR USED IN ANY DESIGN WITHOUT THE EXPRESS, WRITTEN CONSENT OF IAC INDUSTRIES.
132″ OVERALL LENGTH
132″ OVERALL LENGTH
SELECTED WALL CABINETSPRODUCTS LISTED IN ORDER FROM LEFT TO RIGHT ON THE DRAWING ABOVE.
SELECTED CASEWORKPRODUCTS LISTED IN ORDER FROM LEFT TO RIGHT ON THE DRAWING ABOVE.
DESCRIPTION WIDTH PART NUMBERLAB WALL CABINET 30H15D36L MTL DHD 36″ 7002314LAB WALL CABINET 30H15D24L MTL DR S1 24″ 7002052DRYING RACK 36″ SPACER-36LAB WALL CABINET 30H15D36L MTL DHD 36″ 7002314
DESCRIPTION WIDTH PART NUMBERLAB CAB A3536 DD S1 36″ 7000022DISHWASHER 24″ SPACER-24LAB CAB A3536 SBV DD 36″ 7000352LAB CAB B3536 B2 DD S1 36″ 7000402
COUNTERTOP MATERIALTRESPA(R) / PHENOLIC RESIN
OTHER PRODUCTS OF INTEREST
CUSTOMERINFORMATION
COMPANY ABC LABS
NAME JIM JONES
PHONE 787-321-1234
EMAIL [email protected]
COMMENTS
TITLE
NORTH WALL
DRAWING NUMBER
EC-28949-1
Sample view from Lab Designer’s “build area”. Green areas are user-definable “spacers” to allow you to plan for doors, windows, and equipment that casework and cabinets must fit around. Recieve a personalized quote and drawing for your records.
Eclipse™ Online Lab Designer
You Configure.We Deliver.
Your Custom Layout is Just a Few Clicks Away.
Eclipse™ Lab Furnishing ProfessionalsIAC Industries understands the meticulous planning and engineering that today’s laboratories require. And this is why we have dedicated lab professionals and resources to support you.
Our Eclipse professionals support you in the design and layout of your laboratory floor plan, and meeting budgetary requirements. In preparing for an extensive new lab or lab renovation, plans should accommodate not only construction scheduling, but for special furnishing needs. Often there are needs that are not met by off-the shelf products. Our experienced Eclipse Pros support the planning necessary to choose the best laboratory furniture solutions for your lab environment.
3831 S. Bullard AvenueGoodyear, AZ 85338labs.iacindustries.com • 714.990.8997 ©Copyright IAC Industries, 2018 • 8/18