2
BRANDED BRANDED july - August 2012 Phone: 1300 771 424 | Fax: 1300 388 436 www.eccopacific.com.au | email: [email protected] what’s happ ning what’s happ ning Latest events taking place in your area. Ecco Pacific Australia 26 Hargraves Place Wetherill Park Sydney, NSW 2164 Australia PO Box 6152 Wetherill Park Sydney, NSW 2164 Australia Nationwide Telephone: 1300 771 424 Fax: 1300 388 436 Email: [email protected] Website: www.eccopacific.co.nz Central Sydney Telephone: 0488 299 029 (Doni) Central Coast Telephone: 0488 299 016 (Peter) South Sydney / ACT (Matthew) Telephone : 0488 299 205 North / West Sydney (Lisa) Telephone : 0425 299 322 North & Central Queensland Telephone: 0488 299 039 (Veronica) South East Queensland Telephone: 0459 988 068 (Melinda) Victoria Telephone: 0488 299 212 (Ashlee) South Australia Telephone: 0488 299 013 (Simon) Northern Territory Telephone: 0488 299 013 (Simon) Western Australia Telephone: 1300 771 424 (Vi) Tasmania Gordon Wood & Co Telephone: 03 6273 4455 What do you know about 3M Cold Shrink? Watch a demonstration. Developed by 3M, the unique “Cold Shrink” product range is designed to make insulating as simple as possible. The E.P.D.M or silicone rubber is pre-stretched, and loaded onto a removable core. Cold Shrink products require no heat, and no tools to install. Once installed, a constant radial pressure is exerted, ensuring superior electrical and mechanical performance. Cold Shrink tubes are available to accommodate a wide range of cable sizes, and are water resistant to 2 bar. With 20 years of proven field history, 3M Cold Shrink products will retain performance and resiliency for the life of the cable. Features • Provides constant radial pressure • Provides a pressure seal without adhesive • Allows for expansion and contraction after installation • No heat required • No special tools required • Easy to install • Reduction of installation time • Quality - long term reliability • Fits over a wide application range • Moisture resistant • Meets worldwide standards ANSI, IEEE, VDE, JCAA, REA & CSA Application • Primary insulation for all solid dielectric insulated wire and cable splices up to 1000 volts • Directly buriable or submersible • Indoor, Outdoor or Overhead use • Physical protection and moisture sealing for high voltage, air insulated connectors & lugs • Sheath Repairs • Electrical Aircraft cables No Heat. No Tools. Insulation as simple as possible. Cable Jointing 3M Cold Shrink™ Connector Insulators Cold Shrink demonstration. Runtime (1:28). View at www.youtube.com/user/eccopacific/videos Cold Shrink vs Heat Shrink. Runtime (1:21). View at www.youtube.com/user/eccopacific/videos SCAN ME SCAN ME The insulating tube is made of EPDM rubber, which contains no chlorides or sulphurs. 7 diameter sizes will cover a range of 1000- volt cables, suitable for both copper and aluminium conductors COLD SHRINK QUICK SELECTION CHART PRODUCT CODE MIN DIAMETER mm MAX DIAMETER mm LENGTH mm 8423-6 7,8 mm 4,3 mm 152 mm 8424-8* 2,5 mm 20,9 mm 203 mm 8425-8 10,1 mm 20,9 mm 203 mm 8426-9 13,9 mm 30,1 mm 229 mm 8426-11 13,9 mm 30,1 mm 279 mm 8427-6† 17,5 mm 35,1 mm 152 mm 8427-12 17,5 mm 35,1 mm 305 mm 8427-16 17,5 mm 35,1 mm 406 mm 8428-6† 24,1 mm 49,2 mm 152 mm 8428-12 24,1 mm 49,2 mm 305 mm 8428-18 24,1 mm 49,2 mm 457 mm 8429-6† 32,2 mm 67,8 mm 152 mm 8429-9 32,2 mm 67,8 mm 229 mm 8429-12 32,2 mm 67,8 mm 305 mm 8429-15 32,2 mm 67,8 mm 381 mm 8429-18 32,2 mm 67,8 mm 457 mm 8430-9 42,6 mm 93,7 mm 229 mm 8430-18 42,6 mm 93,7 mm 457 mm * Kit contains adapters. These sizes are listed for availability only and are not designed to be used as primary insulation. These tubes are for conduit sealing and breakouts. Two years have flown by and its time again for the Queensland Mining and Engineering (QME) Exhibition. Every year the show grows larger and larger, and this year is no exception. The organisers of QME, Reed Mining Events, say this year’s event is looking to be at least 20 per cent larger than it was in 2010, which was previ- ously a record year, and is playing host to more than 650 exhibitors. Who Attends: Over 650 local and international mining industry suppliers showcasing new products. When & Where: Location: Mackay Showgrounds, Milton Street Mackay Queensland Dates: 24 July 9am - 6pm 25 July 9am – 6pm 26 July 9am – 4pm Come and say Hi! Visit Ecco Pacific and view the new and exciting products we are launching in 2012/13. We are located at stand no.1. Subscribe to BRANDED www.eccopacific.com.au/Marketing BRANDED is a bi-monthly e-newsletter that we send to subscribers. It is a mix of Product News, Specials currently running, Clearance Specials, technical tips and a round-up of events, BBQs and trade shows in your area. Just by subscribing, you stand a chance to win a prize in every edition! Win a Portable Labeller 3M™ PL150 MMM-PL150 RRP $135.35 To enter, subscribe on our website. Competition ends 17 August 2012. Winner will be notified on Monday 20 August 2012 WIN! Win! Scan this barcode to get straight to the entry form. 2012 AIRAH Trade Night Western Sydney June 12, 2012 Doni Lia (above) Presenting the Ecco Pacific range. AIRAH Trade Nights allow AIRAH members and other industry representatives to discuss, touch and observe the new products in the heating, ventilation, air conditioning and refrigeration industry. It was a fantastic opportunity for Ecco to present the benefits and features of Vortice, 3M and Wiha while networking with industry colleagues. The Ecco Pacific duo of Doni Lia(Vortice Product Manager) and Matt Holohan (Belden Product Manager) were there to meet and present our range of wonderful products. Upcoming Events Queensland Mining and Engineering Exhibition

Ecco BRANDED July August 2012

Embed Size (px)

DESCRIPTION

BRANDED is a bi-monthly e-newsletterthat we send to subscribers. It is a mixof Product News, Specials currentlyrunning, Clearance Specials, technicaltips and a round-up of events, BBQsand trade shows in your area.Just by subscribing, you stand achance to win a prize in every edition!

Citation preview

Page 1: Ecco BRANDED July August 2012

BRANDEDBRANDEDjuly - August 2012

Phone: 1300 771 424 | Fax: 1300 388 436 www.eccopacific.com.au | email: [email protected]

what’s happ ningwhat’s happ ningLatest events taking place in your area.

EccoPacificAustralia26HargravesPlaceWetherillParkSydney,NSW2164Australia

PO Box 6152Wetherill ParkSydney, NSW 2164Australia

NationwideTelephone: 1300 771 424Fax: 1300 388 436

Email: [email protected]: www.eccopacific.co.nz

Central Sydney Telephone: 0488 299 029 (Doni)

Central CoastTelephone: 0488 299 016 (Peter)

South Sydney / ACT (Matthew)Telephone : 0488 299 205

North / West Sydney (Lisa)Telephone : 0425 299 322

North & Central QueenslandTelephone: 0488 299 039 (Veronica)

South East QueenslandTelephone: 0459 988 068 (Melinda)

VictoriaTelephone: 0488 299 212 (Ashlee)South AustraliaTelephone: 0488 299 013 (Simon)

Northern TerritoryTelephone: 0488 299 013 (Simon)

Western AustraliaTelephone: 1300 771 424 (Vi)

TasmaniaGordon Wood & CoTelephone: 03 6273 4455

Whatdoyouknowabout3MColdShrink?Watchademonstration.

Developed by 3M, the unique “Cold Shrink” product range is designed to make insulating as simple as possible. The E.P.D.M or silicone rubber is pre-stretched, and loadedonto a removable core. Cold Shrink products require no heat, and no tools to install. Once installed, a constant radial pressure is exerted, ensuring superior electrical andmechanical performance. Cold Shrink tubes are available to accommodate a wide range of cable sizes, and are water resistant to 2 bar. With 20 years of proven field history, 3M

Cold Shrink products will retain performance and resiliency for the life of the cable.

Features• Provides constant radial pressure• Provides a pressure seal without adhesive• Allows for expansion and contraction after installation• No heat required• No special tools required• Easy to install• Reduction of installation time• Quality - long term reliability• Fits over a wide application range• Moisture resistant• Meets worldwide standards ANSI, IEEE, VDE, JCAA, REA & CSA

Application• Primary insulation for all solid dielectric insulated wire and

cable splices up to 1000 volts• Directly buriable or submersible• Indoor, Outdoor or Overhead use• Physical protection and moisture sealing for high voltage, air insulated connectors & lugs• Sheath Repairs• Electrical Aircraft cables

No Heat. No Tools. Insulation as simple as possible. Cable Jointing3M Cold Shrink™ Connector Insulators

ColdShrinkdemonstration.Runtime(1:28).Viewatwww.youtube.com/user/eccopacific/videos

ColdShrinkvsHeatShrink.Runtime(1:21).Viewatwww.youtube.com/user/eccopacific/videos

SCANME SCAN

ME

The insulating tube is made of EPDM rubber, which contains no chlorides or sulphurs.7 diameter sizes will cover a range of 1000- volt cables, suitable for both copper and aluminium conductors

COLDSHRINKQUICKSELECTIONCHART

PRODUCTCODE

MINDIAMETER

mm

MAXDIAMETER

mm

LENGTHmm

8423-6 7,8 mm 4,3 mm 152 mm

8424-8* 2,5 mm 20,9 mm 203 mm

8425-8 10,1 mm 20,9 mm 203 mm

8426-9 13,9 mm 30,1 mm 229 mm

8426-11 13,9 mm 30,1 mm 279 mm

8427-6† 17,5 mm 35,1 mm 152 mm

8427-12 17,5 mm 35,1 mm 305 mm

8427-16 17,5 mm 35,1 mm 406 mm

8428-6† 24,1 mm 49,2 mm 152 mm

8428-12 24,1 mm 49,2 mm 305 mm

8428-18 24,1 mm 49,2 mm 457 mm

8429-6† 32,2 mm 67,8 mm 152 mm

8429-9 32,2 mm 67,8 mm 229 mm

8429-12 32,2 mm 67,8 mm 305 mm

8429-15 32,2 mm 67,8 mm 381 mm

8429-18 32,2 mm 67,8 mm 457 mm

8430-9 42,6 mm 93,7 mm 229 mm

8430-18 42,6 mm 93,7 mm 457 mm

* Kit contains adapters. † These sizes are listed for

availability only and are not designed to be used as primary insulation. These tubes are for conduit sealing and breakouts.

Two years have flown by and its time again for the Queensland Mining and Engineering (QME) Exhibition. Every year the show grows larger and larger, and this year is no exception.

The organisers of QME, Reed Mining Events, say this year’s event is looking to be at least 20 per cent larger than it was in 2010, which was previ-ously a record year, and is playing host to more than 650 exhibitors.

WhoAttends:Over 650 local and international mining industry suppliers showcasing new products.

When&Where:Location: Mackay Showgrounds,Milton Street Mackay Queensland

Dates:24 July 9am - 6pm25 July 9am – 6pm26 July 9am – 4pm

Come and say Hi! Visit Ecco Pacific and view the new and exciting products we are launching in 2012/13. We are located at stand no.1.

SubscribetoBRANDEDwww.eccopacific.com.au/Marketing

BRANDED is a bi-monthly e-newsletter that we send to subscribers. It is a mix of Product News, Specials currently running, Clearance Specials, technical tips and a round-up of events, BBQs and trade shows in your area.

Just by subscribing, you stand a chance to win a prize in every edition!

WinaPortableLabeller3M™PL150MMM-PL150RRP$135.35

Toenter,subscribeonourwebsite.

Competitionends17August2012.WinnerwillbenotifiedonMonday20August2012

WIN!Win!

Scanthisbarcodetogetstraighttotheentryform.

2012AIRAHTradeNightWestern Sydney June 12, 2012

DoniLia(above)Presenting the Ecco Pacific range.

AIRAH Trade Nights allow AIRAH members and other industry representatives to discuss, touch and observe the new products in the heating, ventilation, air conditioning and refrigeration industry.It was a fantastic opportunity for Ecco to present the benefits and features of Vortice, 3M and Wiha while networking with industry colleagues.

The Ecco Pacific duo of Doni Lia(Vortice Product Manager) and Matt Holohan (Belden Product Manager) were there to meet and present our range of wonderful products.

UpcomingEventsQueensland Mining and Engineering Exhibition

Page 2: Ecco BRANDED July August 2012

BRANDED d alsproduct n wsproduct n ws branded d als

Phone: 1300 771 424 | Fax: 1300 388 436 www.eccopacific.com.au | email: [email protected]

Phone: 1300 771 424 | Fax: 1300 388 436 www.eccopacific.com.au | email: [email protected]

Latest product news & new products. Products on promotion right now.Ask in participating wholesalers.

Recommended Promo PriceORDERCODE PRODUCTDESCRIPTION

D011006 THERMOLOGIKA INFRA-RED HEATER +GST$ 118.75

• With infrared radiation it is not necessary to raise the temperature of the whole

room: the comfort of the heat goes straight to the people. • Heat Up Time: approximately 30 sec.• Choice of 3 power outputs: 600/1200/1800 W • Can be switched on and off remotely.• Can be adjusted (22° range) to direct the heat where needed.

SILENTNo Moving Parts

Features• Computer-style keyboard (QWERTY) for easier typing.• One-touch formatting keys for quick labeling.• “Favorites” key pulls your frequently used labels for less repetitive typing • Code 39 and Code 128 barcodes • Fixed-length labels, breaker labels and more.

PowerRuns on 6 AA batteries (not included) optional lithium-ion rechargeable battery (not included)

Unit weight 0.91 kgDimensions (HxWxL) 17.8 cm x 11.7 cm x 5.7 cm

Includes• 3M Portable Labeller PL150• Quick Reference Guide• 1 refill cartridge 19mm (1/2”) black on white vinyl• Limited 1 year warranty

3M™ Portable PL150

The new 3M™ Portable PL150

features the same keyboard layout

as your computer (QWERTY), along

with one-touch formatting keys which

allow you to quickly create wire/cable

wraps, flags, Code 39 and Code 128

barcodes, fixed-length labels, breaker

labels and more.

Print labels up to ¾" wide in flexible

nylon, permanent polyester and durable

vinyl materials – PLUS print directly

on heat-shrink tubes. Save even more

time with great new features like the

and “Custom” keys which

provide single-key access to commonly

used labels, symbols and terms and

eliminate repeated steps by saving

settings.

Easy to Read Large character LCD display

Easy to See High contrast backlight

Easy to Navigate Simple directional keypad

One-Touch Formatting Functionality •General & Fixed •Wire/CableFlag •Module/Breaker •Text Rotate/Text Align •Code 39/Code 128 •New & Exclusive: Custom Logic

Familiar NEW Computer-Style keyboard (QWERTY)

Intuitive Menu bar for access to symbol, term and label library and more

Durable Intergrated rubber bumpers

Long Lasting Li-Ion battery capable

One-Touch Formatting Keys

3M™ Portable PL150

The new 3M™ Portable PL150

features the same keyboard layout

as your computer (QWERTY), along

with one-touch formatting keys which

allow you to quickly create wire/cable

wraps, flags, Code 39 and Code 128

barcodes, fixed-length labels, breaker

labels and more.

Print labels up to ¾" wide in flexible

nylon, permanent polyester and durable

vinyl materials – PLUS print directly

on heat-shrink tubes. Save even more

time with great new features like the

and “Custom” keys which

provide single-key access to commonly

used labels, symbols and terms and

eliminate repeated steps by saving

settings.

Easy to Read Large character LCD display

Easy to See High contrast backlight

Easy to Navigate Simple directional keypad

One-Touch Formatting Functionality •General & Fixed •Wire/CableFlag •Module/Breaker •Text Rotate/Text Align •Code 39/Code 128 •New & Exclusive: Custom Logic

Familiar NEW Computer-Style keyboard (QWERTY)

Intuitive Menu bar for access to symbol, term and label library and more

Durable Intergrated rubber bumpers

Long Lasting Li-Ion battery capable

One-Touch Formatting Keys

LabellerLabeller

19mm ( )

customised

“Favourites”

Personalised“Favourites” key

OptimisedHeatingVortice Thermologika

NEW!

VDE application setsWiha reversible ratchet sets 3/8”

Trade PriceORDERCODE PRODUCTDESCRIPTION

WIH-7207N K1001 Wiha 3/8” reversible ratchet set, 10 pcs +GST$572.31

1000V Rated

ConnectorsSingle Screw Connectors

Recommended Promo Price

+GST$ 11.99ORDERCODE PRODUCTDESCRIPTION UOM

G800020 SCREW CONNECTOR - SINGLE (100pcs) JAR

Torch KitsTrigger-Start MAPP Kit

Trade PriceORDERCODE PRODUCTDESCRIPTION

TTS4000ZKC Bernzomatic Trigger Start Torch & MAPP Kit +GST$133.54

Portable Electronic Labeller3M™ Portable Labeller PL150

Trade Price

ORDERCODE PRODUCTDESCRIPTION

MMM-PL150 PL150 Portable Labeller

+GST$135.45

Application: Safe installation of terminals and sleeves.For all work on or around electrical components up to 1000 V AC

Content: Insulated tools:•Insulated3/8”reversibleratchet,190mm•Insulated3/8”extension,125mm•Insulated3/8”nutdriverinserts,metric•Ratchet with simple locking of the actuating tools with positive locking on the drive square; clockwise and anticlockwise running.

Sizes : 8, 10, 11, 12, 13, 14, 17, 19mm

SCANME

PL150demonstrationvideo.Runtime(2:35).Viewatwww.youtube.com/user/eccopacific/videos

NEW!

Features:• Trigger start self igniting torch head• Lock button for continuous operation• Durable cast aluminium torch head• Pressure regulated for consistent performance at any job angle• 399.7g Propylene gas cylinder included• Stainless steel burn tube and brass burn tip

Benefits:• Swirl flame torch head• 20% larger bottle, longer usage• Can be used at any angle• Safe disposal of empty gas cylinder (20% larger bottle)

MMAP//PRO

PROPYLENE® GAS

SUITABLE FOR:BrazingSolderingGeneral HeatingLoosening Rusted Nails & Bolts

WireRange RatedVoltage L W H h ø ScrewSIze

6mm2 380V 12 20 22.5 14 5.7 M4.0

Description:• Single Screw Connector• 32Amp• Clear high impact plastic insulates• Materials: PC plastic and brass• Conductor Size: 5 - 10 AWG

HOT DEAL

IPX4

• Has splashproof protection and can be installed in rooms with high relative humidity

• Directional heat delivery.

• Acts instantly, even in cold rooms.

min

30 (

cm)

min

200

(cm

)

20°

• The Thermologika® can also be easily installed (using the supplied fixings) near the ceiling and tilted downward through an angle of 22°.

210

INFRARED WALL HEATER FOR AUXILIARY HEATING

THERMOLOGIKA®

� With infrared radiation it is notnecessary to raise thetemperature of the wholeroom: the comfort of the heatgoes straight to the people.Thermologika is suitable fordomestic and commercialapplications when instantheat is necessary or in placesin direct and continuouscontact with the outside. Itheats by radiation, the heatspreads directly at the speedof light straight to the solidbodies with the sameprinciple as solar radiation.

� Wall installation with compactdimensions.

� It ensures immediate comfort.� Maximum silence: it has no

moving parts.� Heat Up Time: approximately 30

sec.� Choice of 3 power outputs:

600/1200/1800 W with a pullswitch, the power output appearsautomatically.

� Can be switched on and offremotely.

� Easy installation and maintenance � Can be adjusted (22° range) to

direct the heat where needed.� Safe: CE marking approval of IMQ

Italian Institution Quality Mark. Itconforms to the followingstandards: EN 60335-1, EN60335-2-30, 73/23 EEC and93/68/EEC and additions, relatedto safety. EN 55014-1, EN 55014-2, EN 61000-3-2 and EN 61000-3-3 and additions, related toElectromagnetic Compatibility. EN60529, concerning the protectionclass IP.

Design: F. Trabucco & Associates

Wiring diagrams shown on pageXXVII.

The Thermologika® can also beeasily installed (using thesupplied fixings) near the ceilingand tilted downward through anangle of 22°.

Dimensions (mm)

� Has splashproof protection and can be installed in rooms with highrelative humidity.

� Directional heat delivery.� Acts instantly, even in cold rooms.

min 3

0 (cm

)mi

n 200

(cm

)

20°

A B C

Thermologika 540 123 100

A C

B

Thermologika

kgAWV ~ 50 Hz

70002 230 1800 8.2 600/1200/1800 1.6 cl.I IPX4

ProductPowersetting

WCode Insulation ProtectionApprovals

NEW

� ��