Dr.

Schu

lze G

mbH

THE

PR

OFE

SSIO

NA

LS C

HO

ICE

Dr. Schulze GmbHDiamond tools and machines

Factory IBollenberg 10, D-57234 WilnsdorfTel. +49 (0) 27 37 59 53-0 - Fax +49 (0) 27 37 59 53-3www.dr-schulze.dewww.diamondtools.ruinfo@dr-schulze.de

Profi-Center Meissner MaschinenStahlstraße 16, D-57234 WilnsdorfTel. +49 (0) 27 37 22 95-0 - Fax +49 (0) 27 37 22 95-15

Factory IIWilhelm-Fressel-Straße 5, D-21337 LüneburgTel. +49 (0) 41 31 5 10 58 - Fax +49 (0) 41 31 5 09 46

Factory IIIStraße D Nr. 3, D-39245 GommernTel. +49 (0) 3 92 00 5 00 68 - Fax +49 (0) 3 92 00 5 00 69

Dr. Schulze-POLSKA Sp. z o.o.ul. Rymarska 10, PL-70-702 SzczecinTel. +48 (0) 91 4 60 68 80 - Fax +48 (0) 91 4 60 68 83www.schulze.plcentrala@schulze.pl

Price per piece, ex works. Our general conditions are valid.For articles marked with the conditions for machines are valid.

Vers

ion

08/1

0

Eazy Saw - rail guided handsawThe rail guided Eazy Saw is 100% safe and can cut up to 21 cm in concrete and brickwork without fatiguing the operator! For smaller projects the Eazy Saw is the perfect alternative for petrol cut off saws, chain- and ring saws.

Technical detailsMax. saw blade Ø 350 - 450 - 540 mmMax. cutting depth 11 - 16,5 - 21 cmMotor 2,2 kW / 230 VRotation speed 2700 min-1

Bore 30 mmWeight: - motor unit 14,6 kg - rail 1,3 m 6,6 kg - rail 2,3 m 9,9 kgWater consumption 1 l/min

Price per piece, ex works. Our general conditions are valid.For articles marked with the conditions for machines are valid.

Cutting processFrom the start position on the guide rail the saw blade is pushed into the wall up to a depth of 3-5 cm. After that the machine is tilted backwards and lowered about 10 cm on the rail. From this position the saw blade is pushed in the wall again. This process is called plunge cutting. The first saw blade is ø 350 mm and can reach a cutting depth of 11 cm. After this saw blades of ø 450 and ø 540 mm can be mounted (in the cut).

Saw unitThe saw unit is equipped with a patented hinge systemwhich fits the carriage on the guide rail. By turning the handle the hinge is secured and prevents the saw blade to jump out of the cut. The hinge is extremely rigid which squeezes the saw blade to move in the cut almost without friction on the blade centre. The cutting performance will therefore increase!The cutting depth regulation is integrated in the saw unit andcan easily be pre-set.

Blade guardThe blade guard is made of aluminium sheet material and has an ergonomically rubber grip. The unique “spray-control” system prevents cooling water to spray from the cut in each position. Additional handles can be moun-ted on both sides of the guard for optimum ease of use during horizontal cutting.

Guide railsThe guide rails are made of high strength aluminium and are mounted on the wall with anchors. The double spirit level, in-tegrated in the end stop of the rail, assures a prefect straight cut. Rails are available with 1,3 meter or 2,3 meter length. The carriage is mounted on the rails with slide bushes which can easily be exchanged.Special adapter plates are available for mounting the rail on uneven or rough walls.

Price per piece, ex works. Our general conditions are valid.For articles marked with the conditions for machines are valid.

Eazy Saw - saw bladesA special set of extra thin saw blades is designed for the Eazy Saw to cut in concrete and brickwork.

These are available in:Ø350 x T=2,8 mmØ450 x T=2,8 mm Ø540 x T=2,6 mm

By using these saw bladesthe maximum cuttingproduction of theEazy Saw is assured.

Triple safety for the operatorThe special design of the hinge prevents the sawblade from “jumping”out of the cut. This increases the safety for the operator. The special slipping clutch inside the motor protects the gearbox and the operator when the saw blade is jammed. The machine is equipped with a personal residual current device (PRCD) and “zero-voltage” cut off. To avoid overload situations, a thermal relay is integrated in the motor housing.

Water coolingThe cooling water is supplied to the saw blade via the hollow shaft in the gearbox. The saw blade segments are therefore cooled efficiently with a minimum of water. With a needle valve the cooling water can be regulated with great precision. The wa-ter indirectly also reduces the temperature of the gearbox which has a positive effect on the lifetime of the motor.

Price per piece, ex works. Our general conditions are valid.For articles marked with the conditions for machines are valid.

Transport casesHeavy duty boxes for trouble free storage and transpor-tation of the Eazy Saw unit and guide rails.

Corner drillTo prevent overcuts on corners just click the Corner Drill on the Eazy Saw guide rail and drill holes up to Ø 80 mm. The column swivels in the baseplate to drill holes on or within the cutting line.

Eazy Saw with flush cut guardSafe and easy flush cutting up to 21 cm depth. The outer brush prevents excessive water spray.

Guide rail couplersFor perfect straight long cuts just connect the various guide rails with a set of aluminium couplers.

Eazy SawSaw unit 2200 W / 230 V / Ø 540 mm blade guard 2.360,00 €Guide rail L= 1,3 meterwith carriage and rubber end pieces 770,00 €

Guide rail L= 2,3 meterwith carriage and rubber end pieces 920,00 €

AccessoriesGuide rail couplers 99,00 €Transport case for saw unit 135,00 €Transport case for rail L=1,3 meter 99,00 €Transport case for rail L=2,3 meter 135,00 €Conversion kit flush cut guard Ø 540 mm 690,00 €Corner drill – max. Ø 90 mm (without drilling-motor) 999,00 €

Eazy Saw - saw blades – concrete + brickwork – wet cuttingØ 350 x 2,8 x 10 mm 398,00 €Ø 450 x 2,8 x 10 mm 675,00 €Ø 540 x 2,6 x 10 mm 745,00 €