EAGLE MWD Surface Systems

Vibmon

The VIBMON monitors down hole shock and vibration in three axes. Real-time telemetry and display of down hole shock

and vibration enables drillers to avoid costly down hole equipment failure and optimize ROP. Data is also recorded down

hole for plotting and analysis on surface.

Directional Interface Module

The XXT DIM provides a flexible, intelligent solution for the acquisition, formatting and telemetry of down hole data to

surface. It is a drop-in down hole Directional Interface Module providing Mud Pulse Telemetry compatible with industry

standard Tensor systems.

Directional Sensor Module

The XXT-DS Directional Sensor, designed to XXT standards and specifications, incorporates the industry renowned JAE

accelerometers and magnetometers. Incorporating XXT’s Digital Head module, the complete Directional Sensor assembly

provides a temperature corrected plug-and-play solution using the most reliable aviation specification components.

The Enteq surface system is based around the xxMWD/PC program suite. This PC based solution offers a unique, feature

rich range of programs and utilities to cover every MWD option. Advanced options such as Dynamic Sequencing save

operating time and optimize data throughput. The software runs on a ruggedized Laversab 4100 unit, which is fully rated

to Class 1 Div 2 specification. Within the 4100 enclosure sits the Enteq MPRx which utilizes XXT’s best-in-class decoding

algorithms to receive and decode the telemetry pulses received from the standpipe’s pressure transmitter. Robust

hardware, filtering and embedded firmware is used to remove mud pump and other undesirable noise, allowing the XXT

down hole sensors to transmit data at maximum bit rates.

EAGLE - The EDGE to maintain performance,

ADAPT to the toughest challenges, GROW with our

customer base, LEADERSHIP that provides

customer service and field support, and the

EQUIPMENT to keep a strong reputation

Gamma Ray Sensor

An Industry standard, Gamma Ray tool based around a highly ruggedized scintillation counter and photomultiplier tube.

The GR data can be used in depth correlation and geostreering applications where radioactive uranium is associated with

gas rich shales.

Pulser Driver & DC Drive Pulser

The XXT-PDEM Pulser Driver and DC Drive Pulser is a rugged field proven unit with a highly efficient and reliable

brushless DC motor. The intelligent PDEM electronics optimizes telemetry rates and manages power consumption using

an accelerometer flow switch. The DC motor drive gives huge battery savings and higher MTBF than comparable

solenoid based units whilst being easy to service.

EAGLE MWD Kits are equipped with the newest tools for more efficient maintenance in the field

MWD Tool Specifications

Directional Sensor Specifications Operating Parameters

Here at EAGLE we would like to thank each of our customers for standing behind us during a down

market. We know the value of loyalty and will always go the extra mile to maintain a higher level of

performance. Thank you!!

Parameters Accuracy Repeatability Resolution

Azimuth (Degrees) +/- 0,5 +/- 0,5 0.1__________

Inclination (Degrees) +/- 0,5 +/- 0,5 0.1__________

Max Temperature 175C Operating 347F Survival 180C

Max Pressure 20,000 PSI_____________________________________

General Information

Operating Temperature (°C) +/- 2,0 +/- 1,0 0.1__________

Local Magnetic Field (Total Magnetic +/- 0,1 mT +/- 0,1 mT 0,05mT Field, microTeslas)_______________________________________________________________

Gravitational position - front of the unit +/- 0,5 +/- 0,5 0.1 (Highside Toolface, Degrees)_______________________________________________________

Magnetic position - front of the unit +/- 1,0 +/- 1,0 0.1 [Magnetic Toolface, Degrees]_______________________________________________________

Azimuth position - front of the unit +/- 1,0 +/- 1,0 0.1 (Magnetic Toolface referenced to Grid or True North, Degrees)___________________________________________________________

Transmission resolution: Selectable Speed (Data Rate): 0.625 bits/sec nominal

Flow Ranges 4 3/4" - 8" Tools 125 - 1000 GPM NMDC Dependent

Pressure Drop Variable Approximately 28PSI / 100GPM

LCM Operating 30 - 55____________________________LBM/BBL______

Tool OD. 1 7/8"_____________Inches_______________ ______

Centralizers OD. 2 - 3.25___________Inches_________________ ______

Tool Length 20 - 28___________ Feet________________ ____ __

Retreivable MWD YES____________________________ ____

Pulse Width .6 - 1.5___________ Seconds_______ Positive Pulse

Safety Is our Policy

Our staff perpetually strives to give our customers the highest level

of around the clock support and service.

Our modern fleet of equipment is operated and maintained under

strict compliance with EAGLE Quality Processes by some of this

industry’s most capable and experienced individuals with continual

focus on compliance with all Health, Safety, and Environmental

standards.

All Field Hands are OSHA 10 and Hazwopper Compliant

EAGLE MWD Tools have upgraded cutting edge functionality

Here at EAGLE we would like to thank each of our customers for standing behind us during a down

market. We know the value of loyalty and will always go the extra mile to maintain a higher level of

performance. Thank you!!

EAGLE MWD tool functions

Real-Time Shock Logging �

Real-Time Vibration Logging �

Memory RPM Logging �

Memory Shock Logging �

Memory Vibration Logging �

Rotational Sensing �

Tool current usage logged to memory �

Smart power management � Smart power management �

Less Internal Moving Parts in Pulser* �

****Patented Pulser Driver �

****Patented Pulser Gear Design �

****Pulser Diagnostics between runs �

UPSI Smart Battery

JAE

Here at EAGLE we would like to thank each of our customers for standing behind us during a down

market. We know the value of loyalty and will always go the extra mile to maintain a higher level of

performance. Thank you!!

UPSI Phase 3 Batteries

Safety Is our Policy

In hot hole environments we are prepare for everything.

All though UPSI is one of the most reliable batteries

on the market today we are always equipped with a

battery spill kit in each MWD box. Our field hands are

trained in battery venting procedures along with the

proper JSA in the event a battery does have an issue.