The ARRIS E6000 Converged Edge Router (CER) delivers new levels of density and cost-effectiveness in

a simple, robust integrated architecture that has the capability to realize the vision of CCAPthe

convergence of high-speed data, voice, and video service delivery from a single connector.

This document provides the typical power usage of the various components of the E6000 CER as well as

the system power at a temperature of 25 C. The typical power is meant to be used to estimate E6000

CER power consumption with an accuracy of +/- 10%. The design of the power feeds for the E6000 CER

should not use this information but must use the information specified in the E6000 CER User

Documentation.

The information in this document is accurate for E6000 CER Generation 1 Hardware and Rel. 1.0

software only.

Below is the E6000 CER per-module typical power:

E6000 Module Typical Power @ 25 C

Fan Tray 50

Router System Module (RSM) 215

Upstream Cable Access Module (UCAM) & Active UPIC 170

Downstream Cable Access Module (DCAM) & Active DPIC 325

The diagram below shows the typical system power consumption of the E6000 CER for a range of

configurations. Note that the system power consumption cannot be computed directly from the

individual power modules above due to less power used when operating in a system with sparing

components enabled.

E6000 Typical System Power (Watts) @ 25 C

Total UCAMs (Active + Spare)

1 2 3 4 5 6 7 8 9 10 11

Tota

l DC

AM

s (A

ctiv

e +

Spar

e) 1 1,045 1,210 1,375 1,540 1,705 1,870 2,036 2,201 2,366 2,531 2,696

2 1,360 1,526 1,691 1,856 2,021 2,186 2,351 2,517 2,682 2,847

3 1,676 1,841 2,006 2,172 2,337 2,502 2,667 2,832 2,998

4 1,992 2,157 2,322 2,487 2,653 2,818 2,983 3,148

5 2,308 2,473 2,638 2,803 2,968 3,134 3,299

6 2,623 2,789 2,954 3,119 3,284 3,449

7 2,939 3,104 3,270 3,435 3,600

8 3,255 3,420 3,585 3,751

9 3,571 3,736 3,901 10 3,887 4,052 11 4,202