e Studio 167

Toshiba TEC UK Imaging Systems Ltd

Launch PresentationJamie Mackenzie – Product Manager

New Product Introduction

Toshiba TEC UK Imaging Systems Ltd.

Contents

Machines Concept

Key Differences§ 3 and 5 series vs 6 and 7 series

Product Specifications/Configurations

232 vs 237

Available Collatarol


New ProductsBrand new products replace the following systems:


Simple Concepts …… Simple Solutions

Reliable systems§ Adopts an e-STUDIO232/282 engine and volumes

§ 100% Toner Recyclable

Plug and Play§ Developer and starter toner included

§ Local print and scan as std

Cost Effective§ Low cost solution for Tender situations

§ Highly Competitive TCO


Two new versions available – 6 and 7 Series

Digital A3 MFP

Simplistic Operation

USB Interface providing:

§ Std Local Print/Scanning

High Image Quality

( version)Low

( version)HighDigital A3 MFP

Optional Fax/Network Printing/Scanning

Configurable Paper Handling

High Image Quality


Key differences – Enhanced Line Up

NEW 23ppm “High” Model

Enhances MFD offering at low end

16 cpm/ppm

20 cpm/ppm

23 cpm/ppm

Low High

Low High

High


Key Differences

Windows Vista Compatibility§ From **July 07**

New Toshiba Viewer V2§ Improved User Interface

Enhanced Standard Memory§ For the 7 series only

§ 112MB Ram as Standard

6+7

16MBLow 64MB

48MBHigh

16MBLow 64MB

112MBHigh

64MB

3+5

Opt. mem.

**Release date is subject to change**


Key Differences

World First Scanning Technology

Deep Focal Depth CIS Scanning

Enhances depth of scanning and quality§ Effecting documentation raised up

to 1mm off the glass

Key application for low end devices is

booklet copying

Improves the quality and accuracy of

the image and output

3 and 5 series 6 and 7 series

Booklet copying


Option Compatibility

New 7 series will adopt some new options

Due to increased speed the new 237 will NOT be compatible with the GH-1050 and KD-1013 interface and paper options

Any GA-1190 option purchased prior to 7 series launch date can be used on new 7 series machines if the firmware is updated

PFC New PFC PFP New PFP N/W PRT kit*GH-1050 GH-1060 KD-1013 KD-1022 GA-1190

165 Yes Yes Yes Yes Yes205 Yes Yes Yes Yes Yes167 Yes Yes Yes Yes Yes**207 Yes Yes Yes Yes Yes**237 No Yes No Yes Yes**

Remarks * After 167/207/237 series launch date** Firmware updating is required if using a GA-1190 purchased prior to 7 series launch date


Product Specific


Copy Features

Copy Speed – 16/20cpm

Warm Up time – 25 Seconds

FCOT – 7.6 sec

Memory – 16MB Std (Upgradeable to 80MB)

Optional Electronic Sort (Requires GC-1240+MR-2107)

Copy Resolution – 2400 x 600 (with smoothing)


Paper Handling

Std Paper Capacity – 350 sheets

Max Paper Capacity – 600 sheets

64 – 80gsm through cassettes

64 – 164gsm through bypass (single sheet feeding)

Up to A3


Printing / Scanning Features

Print Speed – 16/20ppm

Print Resolution – 600 x 600dpi

Interface – USB2.0 (High Speed)

GDI Printing

Scan speed – 20spmResolution – 300, 600 dpiScan method: TOSHIBA Viewer (Version 2), TWAIN driver


The Mechanics

100% Toner Recycling System

PM Cycle§ 166 – 72k

§ 206 – 90k

Average Monthly Volume§ 166 – 20k

§ 206 – 30k


Configuration

Optional§ 100 sheet ADF

§ 250 Sheet Cassette

§ Desk Unit

§ Expansion Memory

§ Manual Pocket

SEE CONFIGURATION SHEETS FOR FULL LIST OF DESCRIPTIONS AND PRODUCT CODES


Product Specific


Copy Features

Copy Speed – 16/20/23cpm

Warm Up time – 25 Seconds

FCOT – 7.6 sec

Memory – 112MB Std (Maximum)

Electronic Sort

Copy Resolution – 2400 x 600 (with smoothing)


Paper Handling

Std Paper Capacity – 350 sheets

Max Paper Capacity – 1700 sheets

64 – 80gsm through cassettes

64 – 164gsm through bypass (single sheet feeding)

Up to A3

Optional ADU Duplex unit


Printing Features

Standard Print -

Print Speed – 16/20/23ppm

Print Resolution – 600 x 600dpi

Interface – USB2.0 (High Speed)

GDI Printing

Optional Network Printing -

Print speed: 16/20/23 speedResolution: 2400 x 600 dpi (with smoothing)Interface: 10Base-T/100Base-TX, USB (Full speed)PDL: PCL6 compatible, PostScript3 compatible


Scanning Features

Standard Scanning -

Scan speed: 20spmResolution: 300, 600 dpiScan method: TOSHIBA Viewer, TWAIN driver

Optional Network Scanning -Scan speed: 20spmResolution: 150, 200, 300, 400, 600 dpiScan method: Scan to File (SMB/FTP), Scan to Email, Scan to TWAIN


Fax Features

Optional Super G3 Fax

Number of Lines: 1Speed dial§ 300 Abbreviated numbers§ 75 one-touch dial

Compression Methods§ MH

§ MR

§ MMR

§ JBIG


The Mechanics

100% Toner Recycling System

PM Cycle§ 167 – 72k

§ 207 – 90k

§ 237 – 90k

Average Monthly Volume§ 167 – 20k

§ 207 – 30k

§ 237 – 30k


Configuration

Optional§ 100 sheet ADF/RADF

§ 250 Sheet Cassette

§ Paper Feed Pedestal

§ Double Siding

§ Network Print

§ Network Scan

§ Fax

SEE CONFIGURATION SHEETS FOR FULL LIST OF DESCRIPTIONS AND PRODUCT CODES


Which 23ppm …

Key Differences


e-STUDIO232 e-STUDIO237

Output

Volume

Interface

Capacity

Finishing

Scanning Functionality

eCOPY

N/A

N/A

Touch Screen – ½ VGA

Max 3,700 sheets

Staple, booklet, hole punch

Up to 50spm, better integration and flexibility

Compatible

N/A

N/A

LCD

Max 1,700 sheets

No Finishing

Up to 20spm, 10 templates available

Not Compatible


Marketing Collateral

The following collateral will be available:

Brochure/Data sheet – End of April (at time of product availability)

e-INFO – End of April (at time of product availability)

e-COMPETE – End of April (at time of product availability)

Press Release – End of April (at time of product availability)

Updated Configurations and Price List – Now

Retail CPC – Now

All information can be found at www.partnernet-tuis.co.uk

Documents

e Studio 167