e P la C emen T bladders - Fuel Safe

21 800-433-6524 Email: [email protected] www.fuelsafe.com 21

rePlaCemenT bladders

Part No. Capacity To FitRB105 5 gal PC105

RB108A 8 gal PC108A

RB108B 8 gal PC108B

RB110 10 gal PC110

RB112 12 gal PC112

RB115 15 gal PC115

RB117 17 gal PC117

RB118A 18 gal PC118A

RB118B 18 gal PC118B


RB122B 22 gal PC122B or C

RB122C 22 gal PC122C

RB122E 22 gal *PC122E

RB124 24 gal PC124

RB126 26 gal PC126

RB129 29 gal PC129


RB132B 32 gal PC132B

RB144 44 gal PC144

Capacities are approximate. Verify can size before ordering.

Part No. Capacity To FitRB205 5 gal SM105

RB208A 8 gal SM108A

RB208B 8 gal SM108B

RB210 10 gal SM110

RB212 12 gal SM112

RB215 15 gal SM115

RB217 17 gal SM117

RB218A 18 gal SM118A

RB218B 18 gal SM118B or C


RB222B 22 gal SM122

RB222C 22 gal SM122C

RB222E 22 gal *SM122E

RB224 22 gal SM124

RB226 26 gal SM126

RB229 29 gal SM129


RB232B 32 gal SM132B

RB244 44 gal SM144

Capacities are approximate. Verify can size before ordering.

Part No. Capacity To FitRB305 5 gal ED105

RB308 8 gal ED108

RB312 12 gal ED112

RB315 15 gal ED115

RB322A 22 gal ED122A

RB322B 22 gal ED122B

RB325 25 gal ED125

RB332A 32 gal ED132A

RB332B 32 gal ED132B

Capacities are approximate. Verify can size before ordering. Only stock sizes available with Enduro bladders.

Part No. RB122E

Oval Series Replacement Bldrs

Part No. FitsRB124 PC124

RB122E PC122E1

RB122E PC122E2

RB024 XC124

RB022E-1 XC122E-1

RB022E-2 XC122E-2

RB022E-3 XC122E-3

RB022E-4 XC122E-4

Off Road Buggy and Truck Replacement Bladders

Part No. Fits Buggy Part No. Part No. FitsTruck Part No.RBOR120BP OR120BP (Pro Cell™) RBOR125TP OR125TP (Pro Cell®)

RBOR125BP OR125BP (Pro Cell®) RBOR135TP OR135TP (Pro Cell®)

RBOR125BE OR125BE (Enduro) RBOR140TP OR140TP (Pro Cell®)



RBOR170TP OR170TP (Pro Cell®)

Pro Cell BladdersFIA-FT3 certified, suitable for all hydrocarbon fuels and alcohol blends. Flexible bladder design can be collapsed for installation. Extremely durable. Comes with nut-ring, foam, gasket, blank steel plate and pickup (-8 plumbed right rear).

Sportsman BladdersFIA-FT3 certified, suitable for all hydrocarbon fuels (gasoline, diesel, avgas.) Flexible bladder design can be collapsed for installation. Lightest weight. Comes with nut-ring, foam, gasket, blank steel plate and pickup (-8 plumbed right rear).

Enduro BladdersFIA-FT3 certified. Compatible with all types of fuel (baffling foam must be removed for use with alcohol fuels). Not collapsible. Very durable and cost effective. Comes with nut-ring, foam, gasket, blank steel plate and pickup (-8 plumbed right rear).

Off Road Replacement Bladders

Oval Series Replacement Bladders

REPLACEMENT BLADDERS

22 800-433-6524 Email: [email protected] www.fuelsafe.com

rePlaCemenT Cans / Foam

Top External Flange (EF)Steel Container Shoebox Lid (SB)Bottom Flange (BF) Replacement Foam

Top or Bottom Flange/Shoebox

Part No. Cpty. FitsAC105 5 gal PC/SM/ED/RS/EED

AC108A 8 gal PC/SM/ED/RS/EED

AC108B 8 gal PC/SM

AC110 10 gal PC/SM

AC112 12 gal PC/SM/ED/RS/EED

AC 115 15 gal PC/SM/ED/RS/EED

AC117 17 gal PC/SM

AC118A 18 gal PC/SM

AC118B 18 gal PC/SM


AC122B 22 gal PC/SM/ED/RS/EED

AC122C 22 gal PC/SM

AC126 26 gal PC/SM/ED/RS/EED

AC129 29 gal PC/SM


AC132B 32 gal PC/SM/ED/RS/EED

AC144 44 gal PC/SM

Add EF for external flange, SB forshoebox lid or BF for bottom flange.

Steel Cpty. FitsSC105 5 gal PC/SM/ED/RS/EED

SC108A 8 gal PC/SM/ED/RS/EED

SC108B 8 gal PC/SM

SC110 10 gal PC/SM

SC112 12 gal PC/SM/ED/RS/EED

SC 115 15 gal PC/SM/ED/RS/EED

SC117 17 gal PC/SM

SC118A 18 gal PC/SM

SC118B 18 gal PC/SM

*SC118C 18 gal PC/SM


SC122B 22 gal PC/SM/ED/RS/EED

SC122C 22 gal PC/SM

SC122E 22 gal PC/SM

SC124 24 gal PC/SM

SC126 26 gal PC/SM/ED/RS/EED

SC129 29 gal PC/SM


SC132B 32 gal PC/SM/ED/RS/EED

SC144 44 gal PC/SM

*SC118C has vertical end flange.

Pro Cell (PC) & Sportsman (SM)

Part # Cpty. FitsFB105 5 gal PC/SM

FB108A 8 gal PC/SM

FB108B 8 gal PC/SM

FB110 10 gal PC/SM

FB112 12 gal PC/SM

FB115 15 gal PC/SM

FB117 17 gal PC/SM

FB118A 18 gal PC/SM

FB118B 18 gal PC/SM

FB122A 22 gal PC/SM

FB122B 22 gal PC/SM

FB122C 22 gal PC/SM

FB122E 22 gal PC/SM

FB124 24 gal PC/SM

FB126 26 gal PC/SM

FB129 29 gal PC/SM

FB132A 32 gal PC/SM

FB132B 32 gal PC/SM

FB144 44 gal PC/SM

Enduro (ED)/Race Safe (RS)

Part # Cpty. FitsFB205 5 gal ED/RS/EED

FB208 8 gal ED/RS/EED



FB222A 22 gal ED/RS/EED

FB222B 22 gal ED/RS/EED


FB232A 32 gal ED/RS/EED

FB232B 32 gal ED/RS/EED

Yellow Foam Blocks 6" x 6" x 6" foam block - Part No. FB6 12" x 12" x 12" foam block - Part No. FB12

Bolted End Load Can For ARCA and other touring seriesPart No. SC122E

NASCAR® Steel ContainerFully welded 20 gauge steel for Touring Series/ARCA/Pro Cup Part No. SC122E-NC - 22 gal.

Steel Containers-Powder Coated Aluminum Containers Replacement Foam

REPL

ACEM

ENT

CANS

/ FO

AM


If you will be using more than 80 percent of your fuel capacity before refueling, you will benefit from the use of a collector (surge tank) which collects fuel more efficiently than a large open bottom tank. Whether you are looking to run down to the last ounce of fuel or just want to ensure a solid supply for an EFI set-up, our various collector options can fill your needs.

6" x 6" x 4" Polymer Surge Tank Collectors

With 3 Ball Check ValvesPart No. ST100

With 3 Ball Check Valves & fitting. Specify pickup size: -6, -8, -10. Part No. ST100-6 (or -8 or -10)

With 3 Machined Aluminum DoorsPart No. ST100-B

With 3 Machined Alum. Doors. Specify pickup size: -6, -8, -10Part No. ST100A-B

With 3 Machined Aluminum Doors, Bosch 044 High Pressure Pump, Filter and Wire HarnessPart No. ST100-HPB-B

With Low Pressure Pump, Filter & Wire HarnessPart No. ST100-LP

With High Pressure Pump, Filter & Wire HarnessPart No. ST100-HP

With 3 Ball Check Valves,Bosch 044 High PressurePump, Filter & Wire HarnessPart No. ST100-HPB

ColleCTors

Fabric Flexible Collectors

Corner Collector w/ (2) Ball Check Valves (Sides 6.5" x Face 9.5" x Height 5.25")Part No. ST100B

Center Collector w/ (3) Ball Check Valves (7.5" x 6" x 5")Part No. ST100C

Corner Box Collectorw/(2) Ball Check Valves(7.5" x 6" x 5")Part No. ST100D

Center Collector w/ 3 Machined Alum. Doors & Directional Fins (7.5" x 6" x 5" excluding fins)Part No. ST100E-B

Corner Box Collector w/ 2 Machined Alum. Doors (7.5" x 6" x 5")Part No. ST100D-B

Center Collector w/ (3) BallCheck Valves & Directional Fins (7.5" x 6" x 5" excluding fins)Part No. ST100E

Corner Collector w/1 Machined Alum. Door (Sides 6.5" x Face 9.5" x Height 5.25")Part No. ST100B-B

Center Box Collector with3 Machined Alum. Doors(7.5" x 6" x 5")Part No. ST100C-B

1" Surge Tank Check ValvePart No. CV100

Trap Doors and Check Valves

1½" Trap Door Check Valve, alum., with O-ring seal & feed rampPart No. TD150-OR

COLLECTORS


Fill PlaTes / elboWs

6X10 dual 2¼" remote aluminum plate w/ fill & vent check valves for dual dry break (pictured)Part No. DR250

6X10, 4-3/4" BC w/ -8 pickup and -8 ventPart No. ML6X10A

6X10 fill plate,1" vent, 4-3/4" BCPart No. ML6X10B (pictured above)1" vent & steel ball, 4-3/4" BC - Part No. ML6X10BS1¼" vent valve - Part No. ML6X10C1¾" vent valve - Part No. ML6X10D

6X10, offset filler, -8 pickup, -8 vent, 4-3/4" BCPart No. ML6X10E6X10, offset filler & sender provision, 4-3/4" BC Part No. ML6X10E-S (pictured above)

Standard Style Fill Plates

Remote Style Fill Plates

Multi-Location Fill Plates

6X10, 2.5" cap w/ rollover protection, -8 vent, -8 pickup - Part No. SF6X10A 6X10 aluminum fill plate w/ 45° remote fill, single

-8 pickup, single -8 vent w/ rollover protection, extra capped bulkhead, sender provision2.25" remote fill - Part No. ML6X10RF-2252.5" remote fill - Part No. ML6X10RF-2503" remote fill - Part No. ML6X10RF-300

6X10, 2.25" cap w/ rollover protection, -8 vent, -8 pickup - Part No. SF6X10B

6X10, 2.5" cap w/ rollover protection, alum.Part No. SF6X10C

6X10 fill plate, 4" cap, -8 vent, -8 pickupPart No. SF6X10D

4x6 fill plate, 3" rollover valve & 1" ventPart No. RF390B4x6 fill plate, 2¼" rollover valve & 1" vent check valvePart No. RF4X6B

4x6 fill plate, 2.5" cap w/ rollover protectionPart No. SF4X6D

Fuel Safe's standard 6X10 fill plate w/ 2.5" cap w/ rollover protection -8 pickup, -8 vent, -8 return capped off, provision for senderSteel plate - Part No. SF6X10E Aluminum plate - Part No. SF6X10E-A

4x6 fill plate, 3" rollover valvePart No. RF390A4x6 fill plate, 2.25" rollover valvePart No. RF4X6A

4x6 fill plate, 2.25" cap w/ rollover protection, -6 vent, -6 pickupPart No. SF4X6B

4x6 fill plate, 2.25" cap & neck, w/ rollover protection, -6 vent, -6 pickupPart No. SF4X6C

6X10 dual remote 2.25" w/ 45° fill valves, aluminumPart No. DR245A6X10 dual remote 2.5" w/ 45° fill valves, aluminumPart No. DR245B 6X10, 45° 3" dual remote plate w/1" vent aluminumPart No. DR345 (pictured above)

Rubber ElbowsTough, for use with remote fill plates45° elbow , 2¼" - Part No. RE45-22545° elbow, 3" - Part No. RE45-390° elbow, 2¼" - Part No. RE90-22590° elbow , 3" - Part No. RE90-3

FILL

PLA

TES

/ RUB

BER

ELBO

WS


AN 45° Hose Barb, Lightweight-6, 3/8" - Part No. HFL45-6-8, 1/2" - Part No. HFL45-8-10, 5/8" - Part No. HFL45-10-12, 3/4" - Part No. HFL45-12

AN 45° Hose Barb, Brass Plated-6, 3/8" - Part No. HF45-6-8, 1/2" - Part No. HF45-8-10, 5/8" - Part No. HF45-10-12, 3/4" - Part No. HF45-12 AN 90° Hose Barb, Brass Plated-6, 3/8" - Part No. HF90-6-8, 1/2" - Part No. HF90-8-10, 5/8" - Part No. HF90-10-12, 3/4" - Part No. HF90-12

AN 90° Hose Barb, Lightweight-6, 3/8" - Part No. HFL90-6 -8, 1/2" - Part No. HFL90-8 -10, 5/8" - Part No. HFL90-10-12, 3/4" - Part No. HFL90-12

Fuel and Vent Hookup Fittings - AN Straight Hose Barb, Lightweight-6, 3/8" - Part No. HFL00-6-8, 1/2" - Part No. HFL00-8-10, 5/8" - Part No. HFL00-10-12, 3/4" - Part No. HFL00-12

Fuel and Vent Hookup Fittings -AN Straight Hose Barb, Brass plated-6, 3/8" - Part No. HF00-6-8, 1/2" - Part No. HF00-8-10, 5/8" - Part No. HF00-10-12, 3/4" - Part No. HF00-12

AN Hose Barbs

HF00 HF45 HF90

HFL45 HFL90HFL00

Bulkhead Fittings

BHF00 BHF90

Straight Fittings 90° Fittings -4, 1/4" - Part No. BHF00-4 -4, 1/4" - Part No. BHF90-4 -6, 3/8" - Part No. BHF00-6 -6, 3/8" - Part No. BHF90-6 -8, 1/2" - Part No. BHF00-8 -8, 1/2" - Part No. BHF90-8-10, 5/8" - Part No. BHF00-10 -10, 5/8" - Part No. BHF90-10 -12, 3/4" - Part No. BHF00-12 -12, 3/4" - Part No. BHF90-12

(mounted on multi-location plate)2-1/4" 90° Rollover Valve (4-3/4" BC) - Part No. FV290A2-1/2" 90° Rollover Valve (4-3/4" BC) - Part No. FV290B3" 90° Rollover Valve (4-3/4" BC) - Part No. FV3902-1/4" 90° Rollover Valve (5-3/8" BC) - Part No. CTR225-903" 90° Rollover Valve (5-3/8" BC) - Part No. CTR300-902-1/4" 45° Rollover Valve (4-3/4" BC) - Part No. FV245A2-1/2" 45° Rollover Valve (4-3/4" BC) - Part No. FV245B2-1/4" 45° Rollover Valve (5-3/8" BC) - Part No. CTR225-452-1/4" Rollover Valve (4-3/4" BC) - Part No. QF2453" Rollover Valve (4-3/4" BC) - Part No. QF345

Remote Fill Valves

FV290/FV390 FV245 QF245/QF345

2-1/2" Rollover Valve, 4¾" BC - Part No. FV290B-C2-1/4" Rollover Valve, 4¾" BC - Part No. FV290A-C

AN "Y" fitting, lightweight, aluminum-8 female to two -6 males - Part No. HFL-Y- 8-6-8 female to two -8 males - Part No. HFL-Y-8

AN straight bulkhead fitting, billet aluminum blue anodized, steel washer, nylon washer and nut.-6 AN to -8, -8 through plate - Part No. BHF00-8-6-8 AN to -10, -10 through plate - Part No. BHF00-10-8

FV290A-C (Bayonet)

Standard Fill Valves

Adapters

FV290B-C (Threaded)

Fill valves / bulkhead FTGs. FILL VALVES / BULKHEAD FITTINGS


Vent Check Valveswith Rollover Protection

venT valves / venT FilTers

In hose 3/8" Rollover Vent ValvePart No. RV38

-8 return check valvePart No. ITRV08

-4 vent check valve, low clearance 90°, 1/4" out vent, was PN 1FLU101Part No. THV45

In tank or inline vent valve,red anodized aluminum-6 AN - Part No. TPV68mm hose barb - Part No. TPV8

In line vent valve with 7 mm hose barb, with rollover protection, red anodized aluminumPart No. TRL7

-8 in tank vent check valvePart No. ITVV08with spring for standard fillPart No. ITVV08S

In tank vent check valve 90° fitting-6 - Part No. ITVV06-90-8 - Part No. ITVV08-90-10 - Part No. ITVV10-90

1" Check ValvePart No. ITV100

1-3/4" Check ValvePart No. ITV175

1" Weld-in Check ValvePart No. ITV100-NF

Large Diameter Vent Check Valves with Rollover Protection. For positive shut-off and faster refueling. Mounts in bladder.

-6 return check valvePart No. ITRV06

In Tank Rollover Return Valves

Pressure Relief Vent Valve

3/8" - Part No. VF381/2" - Part No. VF121" - Part No. VF100

In Line Vent Valve Air Vent Filters Rollover Valve

In tank Rollover Return Valve, High Performance-6, 3/8" - Part No. ITRV06HP-8, 1/2" - Part No. ITRV08HP-10, 5/8" - Part No. ITRV10HP

-10 in tank vent check valve assemblyPart No. ITVV10

-6 in tank vent check valvePart Number ITVV06with spring for standard fill Part No. ITVV06S

In line vent check valveOffers positive shut-off-6, 3/8" - Part No. ILVV06-8, 1/2" - Part No. ILVV08

High Flow Vent Valve-10 in tank check valve with low profile cap and internal springPart No. ITVV10LP-S

-8 (1/2") in tank discriminator valve bulkhead/plate mountPart No. ITDV08

Discriminator Valves (discriminates between gas and air)

1" discriminator valve with -12 fittings, external mountPart No. DV100

In tank discriminator(-10, -12, -16) Must be welded in a platePart No. ITDV

1-3/4" external mounted discriminator valvePart No. DV175

VENT

VAL

VES

/ VEN

T FI

LTER

S


PumPs / harnesses / PiCkuPs

3/8" Horizontal - Part No. FS381/2" Horizontal - Part No. FS12

FSHP adapter for Bosch pump to FSHP Filter Part No. 1HDW52

In Tank Fuel Pumps & FiltersBosch Pump & Accessories

Low Pressure Pump (4-6 PSI) 35 gphPart No. FPLPComes with filter - Part No. FSLP

Bosch High Output Pump 200 liters per hour (52.5 gph) at 72 psi (5 bar) at 13A, comes with filterPart No. FPO44

High Pressure Pump (95 PSI) 80 gphPart No. FPHP Comes with filter - Part No. FSHP

Billet aluminum in-line check valve for Bosch pump. Threads directly onto pump outlet and -8 male AN fitting on outlet side. 2-3 PSI cracking pressurePart No. ILPCV08

3/8" Vertical - Part No. FS061/2" Vertical - Part No. FS08

Wiring Harnesses

Female, 2-wirePart No. WH04F2

Male 2-wire, with terminal for 1 FPHPPart No. WH04M2

Female, 4-wirePart No. WH04F4

Male 4-wire, withterminal for 2 FPHPPart No. WH04M4

Female, 5 pin, 4-wire, positive lockingPart No. WH05F4

Male, 5 pin, 4 wire(mount in plate)Part No. WH05M4

Male, 4 pin, 2 wire, 24" length, includes install kitPart No. WH04M2-NC

Male, 4 pin, 4 wire, 24" length, includes install kitPart No. WH04M4-NC

Includes 2 ft. hose, swivelhose barb & bulkhead fitting- 4 , 1/4" (no filter) - Part No. FP179 - 6, 3/8" (with filter) - Part No. FP180 - 8, 1/2" (with filter) - Part No. FP181- 10, 5/8" (no filter) - Part No. FP182- 12, 3/4" (no filter) - Part No. FP183

Corner Pick-up AssemblyDesigned for use where maximum fuel pick-up is required. Allows the fuel line to pick up the last drop of fuel.3/8" - Part No. CP381/2" - Part No. CP125/8" - Part No. CP58

Billet UltralightLow Profile PickupRequires mounting stud in bladder. -6 AN - Part No. BPU06-8 AN - Part No. BPU08-10 AN - Part No. BPU10

35 Micron Aluminumwith Stainless ElementOverall lengths4.5" Billet with -6 filter - Part No. FF200A6" Billet with -8 filter- Part No. FF200B6" Billet with -6 filter - Part No. FF250A8" Billet with -8 filter - Part No. FF250B

Plastic Low Profile PickupRequires mounting stud in bladder. -6 AN - Part No. LPP06-8 AN - Part No. LPP08-10 AN - Part No. LPP010

Pickup Accessories

In Line Filters

Fuel Pick-Up Kits

PUMPS / HARNESSES / PICKUPS

All wiring harnesses are 16 gauge.


Fill CaPsNewton "Monza Style" Fill Caps Newton Flush Fill Caps Standard Fill Caps

1¾" , 6 bolt, 2½" BCWas PN AFC175APart No. A26S

Locking insert for CF250 & CF275Part No. Z2L

A x B x C dimensions.More information atwww.fuelsafe.com/store.

3”, 9 bolt, 4” BCWas AFC300BPart No. A49S

1¾", 6 bolt, 2½" BC with weld flangeWas PN AFC175BPart No. A2NSX

A-3.2" x B-2.4" x C-1.1"Internal venting system•Flange neck: 3.25" dia•2.5 BC, 6 bolt•2" hose barb adapter on flange•Accepts fill nozzles up to 1.25" •in dia.

Part No. CF200

3", 9 bolt, 4" BC, w/ lockWas AFC300B-LPart No. A49L

2", 6 bolt, 3" BC, w/ lockWas AFC200A-LPart No. A36L

2", 6 bolt, 3" BCWas AFC200APart No. A36S

A-4" x B-3" x C-1.3"Internal venting system•Flange neck: 3.7" dia•3" BC, 6 bolt•Combination 2" or 2.25" •hose barb adapterLocking insert option•Accepts fill nozzles up to •1.25" in dia.

Part No. CF250

3”, 12 bolt, 4.75 BCWas AFC300APart No. A412S

1.75" threaded non vented fill cap with dipstick provisionPart No. FC175

2.5" threaded non vented fill cap Part No. FC250C

2.25" bayonet style, non vented fill capPart No. FC225

3" bayonet style, non vented fill capPart No. FC300

2”, 6 bolt, 3" BC w/ 2" & 2.25" remote flangeWas AFC200BPart No. A36NS2

A-4.6" x B-3.3" x C-1.3"Chrome finish•Flange neck: 3.7" dia.•3" BC, 6 bolt•2" or 2.25" hose barb adapter •on flangeLocking insert option•Accepts fill nozzles up to •1.25" in dia.

Part No. CF275

3", 12 bolt, 4.75 BC, w/ lockWas AFC300A-LPart No. A412L

2”, 6 bolt, 3" BC w/ 2" & 2.25" remote flange, w/ lockWas AFC200B-LPart No. A36NL2

A-5.2" x B-3.9" x C-3.6"With locking insert•Compression style mounting •flange 3.7" dia.2" or 2.25" hose barb adapter •on flangeAccepts fill nozzles up to •1.25" in dia.

Part No. CF300

4" fill bail cap, bayonet style (fits FN400 & CTF400)Part No. FC400

FILL

CAP

S


dry breaks / Fill equiPmenTRedhead® Dry BreaksFemale 1.5" tank mount1.75" receiver, no bulbPart No. DBF125A

Female 4" BC flange, tank mount for DBM200R, 2.5" receiver, no bulbPart No. DBF225B

Female 4.75" BC , tank mount for DBM200R, 2.5" receiver, no bulbPart No. DBF225C

Female 1½" remote mount, 1.75" receiver with aluminum bulbPart No. DBF125B

Male, 1.5" hose barb, 1.75" probe, 1.25" ID borePart No. DBM125

Male, 2.25" hose barb, 2.5" probe, 2" ID borePart No. DBM200R

Female 2.25" or 2.5" hose barb with polymer bulbPart No. DBF300R

Big Bore Dry Break, Female, 2.25" hose barb, 2.5" receiverPart No. DBF300R-A225Big Bore Dry Break, Female, 3" hose barb, 2.5" receiverPart No. DBF300R-A3

Double Dry Break, Female, 4.5" center, 2.5" receiver, 2.25" hose barb with aluminum bulbPart No. DDBF225R-100Double Dry Break, Female, 100mm center, 2.5" receiver, 2.25" hose barb with aluminum bulbPart No. DDBF225R-4.5

Double Dry Break, Female, 4.5" center, tank mount, 2.5" receiver, no bulbPart No. DDBF225T-4.5Double Dry Break, Female, 100mm center, tank mount, 2.5" receiver, no bulbPart No. DDBF225T-100

Double Dry Break, Male, 100 mm center, 2.5" probe, 2.25" hose barb, 2" ID borePart No. DDBM225R-100Double Dry Break, Male, 4.5" center, 2.5" probe, 2.25" hose barb, 2" ID borePart No. DDBM225R-4.5

Redhead® Dry Break Rebuild Kits

Quick Fill Dump Cans11 gallon - Red - Part No. DC011R11 gallon - White - Part No. DC011W

Refueling Vent Bottle5 gallon/20 liter. Can be used for filling or to catch vent overflow.Part No. DC006

Big Bore Filler4" neck fits 3" hose Part No. FN400Fender Fillers & Adapters

2.25" recessed remote fender fillerPart No. RFF225

3" recessed remote fender fillerPart No. RFF300

Fender Adapter9 bolt for 3" AFC300B cap, with hose barb, without nut-ring2.25" - Part No. FA300-2253" - Part No. FA300-300

2.25" recessed remote fender filler kit includes RFF225, 2' filler hose, 2' aluminum tubing and hose clampsPart No. RFK225

3" recessed remote fender filler kit includes RFF300, 2' filler hose, 2' aluminum tubing and hose clampsPart No. RFK300

DRY BREAKS / FILL EQUIPMENT

Female, for 2.25" receiver, 2" ID borePart No. 1HDW39Male, 2.5" probe, 2" ID borePart No. 1HDW40Female, 1.75" receiver, 1.25" ID borePart No. PP125FMale, 1.75" probe, 1.25" ID borePart No. PP125M


Electronic Parts

Sending Units

Fire boTTles / senders / misC.

LED Panel LightLED 12 Volt Panel LightPart No. 1ELE52

Electronic fuel level sending units are specially designed for fuel cells and bladders. No mov-ing parts make these units very durable. Send-ing units can be shortened to fit your cell and recalibrated for accuracy. Must specify OHM range (empty to full) when ordering.

Length/OHM Range Part No.12" probe, 0-90 SUP12 0-9012" probe, 10-180 SUP12 10-18012" probe, 240-33 SUP12 240-3312" probe, 76-6 SUP12 76-624" probe, 0-90 SUP24 0-9024" probe, 10-180 SUP24 10-18024" probe, 240-33 SUP24 240-33Add -L to part number for fullyadjustable low level light assembly.

Fuel Gauge0-90 OhmGas GaugePart No. GA200

Dip Stick, -6 bulkhead. Standard length is 18".Part No. DS08

Filler Cap, 1-3/4" non-vented, black anodized finish. Standard length is 18".Part No. FC175-DS

Float Switch (350 Milliamp)Part No. 1ELE51

Blank Aluminum PlatesComes with bolt kit and gasket.12 Bolt Oval - 4" x 6" - Part No. 1PLA0524 Bolt Oval - 6" x 10" - Part No. 1PLA1312 Bolt Circle - 4-3/4" BC - Part No. 1PLA1410 Bolt Circle - 3-1/8" BC - Part No. 1PLA166 Bolt Circle - 2-15/16" BC - Part No. 1PLA186 Bolt Circle - 2" BC - Part No. 1PLA305 Bolt Circle (Sending Unit) - Part No. 1PLA344 Bolt Circle - 1-5/8" BC - Part No. 1PLA629 Bolt Circle - 4" BC - Part No. 1PLA73 16 Bolt Circle - 6" BC - Part No. 1PLA75(Anodized plates are 2PLA series; i.e. 2PLA05.)

Gaskets10 Bolt Circle - 3-1/8" BC - Part No. 1GAS075 Bolt Circle (Sending Unit) - Part No. 1GAS694 Bolt Circle - 1-5/8" BC - Part No. 1GAS746 Bolt Circle - 2-15/16" BC - Part No. 1GAS756 Bolt Circle - 2" BC - Part No. 1GAS769 Bolt Circle - 4" BC - Part No. 1GAS7712 Bolt Circle - 4-3/4" BC - Part No. 1GAS7812 Bolt Circle - 5-3/8" BC - Part No. 1GAS7924 Bolt Oval - 6" x 10" - Part No. 1GAS9712 Bolt Oval - 4" x 6" - Part No. 1GAS98

Nylon Washer Kits1.080" ID x 1.5" OD (10 count) - Part No. GK53-10 bulkhead fitting (10 count) - Part No. GK54-8 bulkhead fitting (10 count) - Part No. GK55.583" ID x .937" OD (10 count) - Part No. GK56.25" ID x .5" OD (50 count) - Part No. GK57

Displacement BlocksTune your fuel cell's volume. Custom sizes also available.1/8 gallon, 2-7/8" x 2-7/8" x 3-3/8" - Part No. DB025 1/2 gallon, 8-3/4" x 3-1/2" x 3-1/2" - Part No. DB0501 gallon, 8-1/4" x 5-1/4" x 5-1/4" - Part No. DB1002 gallon, 5" x 8" x 12" - Part No. DB200

Dip Sticks

Clear Hose Vent/ Fill1" ID Wire Reinforced - Part No. CVH100W1" ID Nylon Reinforced - Part No. CVH100N1" ID Helix Reinforced - Part No. CFH100H1.25" ID Helix Reinforced - Part No. CVH125H1.5" ID Helix Reinforced - Part No. CFH150H2" ID Helix Reinforced - Part No. CFH200H2" ID w/ Copper Ground Wire - Part No. CFH200WC2.25" ID Not reinforced - Part No. CFH2252.25" ID Wire Reinforced - Part No. CFH225W2.5" ID w/ Copper Ground Wire - Part No. CFH250WC2.5" ID Helix Reinforced - Part No. CFH250H3" ID Helix Reinforced - Part No. CFH300H3" ID w/ Copper Ground Wire - Part No. CFH300WC

Fire Safe™Fire Suppression Systems

FSK225-A-SL FSK4002.25 liter aluminum bottle with charge •gaugeSteel mounting base, mounting straps•12 & 6 foot pull cable, one each•2 nozzles and 1 tee fitting•12' tubing•2 E stickers•

4 liter steel bottle with charge gauge•Steel mounting base, mounting straps•12 & 6 foot pull cable, one each•6 nozzles, 5 tee fittings, 1 bulkhead •fitting15' tubing•2 E stickers•

Charged to 7 Bar (100 PSI),System weight: 11 lbs.Length 14" Diameter 5"Part No. FSK225-A-SL

Charged to 8 Bar (116 PSI)System weight: 18 lbs.Length 17" Diameter 6"Part No. FSK400FSK400 shown

Low Level SensorsFor positive indication of low fuel levels. 6" probe - Part No. 1ELE0712" probe - Part No. 1ELE1324" probe - Part No. 1ELE08

Black, Wire Reinforced, 2.25" ID, sold in 10' lengthsPart No. BFH225

FIRE

BOT

TLES

/ SE

NDER

S/MI

SC.

Pickup Hose-4, 1/4" ID - Part No. PUH04-6, 3/8" ID - Part No. PUH06 -8, 1/2" ID - Part No. PUH08-10, 5/8" ID - Part No. PUH10-12, 3/4" ID - Part No. PUH12 5/16" ID - Part No. 1HOS31

Documents

e P la C emen T bladders - Fuel Safe