E instruments €¦ · experienced professionals working on automation and instrumentation market, having large experience on project techniques, maintenance and installation, in

www.vivaceinstruments.com.br/en 1 Copyright Vivace© 2018

TM

Process Instruments

E instruments www.eigroup.biz


TM

Process Instruments

ABOUT VIVACE

Vivace Process Instruments is a company that provides products and services for industrial automation and control.

The company was born to grow, inspire with courage to change, leave the obvious and overcome challenges. More than this, start a new phase on the development and supply of industrial automation products and services in Brazil. Everything to keep our major value: your trust.

Vivace is composed by a multidisciplinary team of over 25-years experienced professionals working on automation and instrumentation market, having large experience on project techniques, maintenance and installation, in addition to knowledge of all process segments such as sugar & ethanol, mining, oil & gas, paper & cellulose, food & beverage and others.

The team of developers has large experience on the development of industrial automation and instrumentation technology, successfully supporting national and international companies on the conception, specifi cation, implementation and certifi cation of industrial automation development projects. It also off ers software and hardware projects on HART®/4-20mA, WirelessHART, Foundation Fieldbus and Profi bus technologies, in addition to integrating those communication protocols on customer products, working together on the choice of the best option and technology to attend the customer needs.



TM

Process Instruments

VPT10TRANSMITTER FOR PRESSURE, LEVEL AND FLOW APPLICATIONS

VPT10 is a pressure transmitter with high performance capacitive sensor, designed for diff erential, absolute and gauge pressure measurements, as well as models for level applications: fl anged, remote seal and sanitary options.

VPT10 is available with HART® 7 and Profi bus-PA communication protocols, being a robust and highly reliable solution for pressure, level and fl ow measurements, ensuring effi cient and reliable process results with high availability.

Main Features:

• Basic Accuracy: ± 0.075%• High Accuracy: ± 0.05%• Innovative: High Performance Microprocessed Capacitive Sensor, digital Reading• Built-in Temperature and Pressure Compensation• Range 1: -765 to 765 mmH2O up to Range 7: -1 to 210 Kgf/cm2• HART® 7 / 4-20mA and PROFIBUS-PA• Totalizing with Persistence• Response Time: < 50 ms• Square Root Extraction and User Table• 5 Digit LCD, Rotatable, Multifunctional and Easy to Use• Advanced Diagnostics• Supports DD, EDDL and FDT / DTM• No Power Polarity• Built-in Transient Protector• Low PTE-Probable Total Error• High Rangeability and Stability• Local Adjustment with Magnetic Tool

www.vivaceinstruments.com.br/en 3 Copyright Vivace



TM

Process Instruments

APPLICATIONS



TM

Process Instruments

VPT11TRANSMISSOR DE PRESSÃO E NÍVEL

VPT11 is a pressure transmitter with High-performance Piezoresistive Silicon Sensor, designed for absolute and gauge pressures, as well as models as fl anged level, remote and sanitary seal.

VPT11 is available with HART® 7 and Profi bus-PA communication protocols, being a robust and highly reliable solution for pressure and level measurements, ensuring effi cient and reliable process results with high availability.

Main Features:

• Basic Accuracy: ± 0.075%• High Accuracy Model: ± 0.05%• Innovative: High Performance Microprocessed

Piezoresistive Silicon Sensor, digital Reading• Built-in Temperature and Pressure Compensation • 6 Manometric Pressure Ranges - from 0 to 40 MPa• 3 Absolute Pressure Ranges - from 0 to 3.0 MPa• Response Time: < 100 ms• HART® 7 / 4-20mA and PROFIBUS-PA• 5 Digit LCD, Rotatable, Multifunctional and Easy to Use • Advanced Diagnostics • Supports DD, EDDL and FDT / DTM • No Power Polarity • Built-in Transient Protector • Low PTE-Probable Total Error • High Rangeability and Stability • Local Adjustment with Magnetic Tool



TM

Process Instruments

VVP10VALVE POSITIONER

VVP10 is a smart positioner designed to work with linear or rotary valve actuators, providing precision and control with high availability and reliability. It allows easy installation and commissioning and it is suitable for various types of valves, regardless of type and size.

VVP10 positioners are available in HART® 7 / 4-20mA and PROFIBUS PA technologies. HART® model has in its standard model the feedback signal (4-20mA) to indicate the current controlled position.

VVP10 also off ers a model with pressure sensor, digital inputs (limit switches), outputs (for alarms and safety solenoid valves) and advanced diagnostics that help to predict effi ciently the need for maintenance.

VALVE POSITIONER

Main Features:

• HART® 7 / 4-20mA and PROFIBUS-PA• Compact, high-performance, multifunctional• Designed to operate under severe conditions and high

robustness with instrumentation air quality• Electronic coil technology• Non-contact position sensor (Hall sensor)• Suitable for most brands of valves / actuators• Single and double actions• Remote position sensor available for high vibration and high

temperature applications• Auto-Setup, Auto-Tuning, Partial Stroke Test, Position Histogram

and Advanced• Diagnostics• Usual or user-defi ned characterization curves (table)• Pressure sensors• Air supply pressure from 20 to 140 psi• Actuator stroke

- Linear 3 to 100 mm and rotary 30 to 120 °• 5-digit rotary, alphanumeric and bar graph LCD• Local Adjustment• Supports DD, EDDL and FDT / DTM• 02 Digital inputs (limit switch) and 02 Digital outputs (for

solenoid safety valve actuation)• Standard model HART® 7 4-20mA: with feedback position signal

(4-20mA)



TM

Process Instruments

APPLICATIONS



TM

Process Instruments

VTP10POSITION TRANSMITTER

VTP10 is a Position transmitter that was projected to monitor linear or rotative movement systems, such as valve actuators. Linear or rotary applications: manual and modulating control valves, sluice gates, tilting systems, conveyor belt alignment, level measurement etc.

Main Features:

• HART® 7 or Profi bus-PA Communication Protocols• For linear and rotary applications: control, manual, modulator or

sluice valves, tilting systems, alignment of conveyor belts, level measurement etc.

• No Polarity Power Supply • Work Range Confi guration • Operation Limits Alarms • No Mechanical Contact Magnetic Sensor • Remote Sensor (optional)• 5-digit, rotative, multifunctional, bargraph LCD • Predictive Maintenance Diagnostics • Position Histogram • Measuring Unit Confi guration • Operation Temperature -40 to 85 °C • Supports EDDL and FDT/DTM Programmers and Tools• Local Adjust



TM

Process Instruments

VTT10TEMPERATURE TRANSMITTER

VTT10-F: FIELD MOUNTING

VTT10-H: HEAD MOUNTING

Vivace’s temperature transmitter line provides reliable measurement with high accuracy and stability. They are robust and suitable for temperature measurement in the toughest processes of practically all industrial segments.

Using very low consumption, high performance microcontrollers and working with HART® 7 / 4–20 mA and Profi bus-PA technologies, transmitters are available in diff erent models to provide easy assembly according to the application: head mounting, panel and fi eld.

Main benefi ts:

• High accuracy and long-term stability• Several types of measurement and sensors (TC, RTD, mV and Ω)• Callendar–Van Dusen• Ambient temperature compensation• Self-diagnosis• Five digits, rotary, multifunctional with bargraph LCD• Intuitive, confi gurable with fast editing function local adjustment• HART® 7 /4-20 mA and Profi bus-PA communication protocols• NAMUR NE43 (HART® 7 /4-20 mA model)

VTT10-F is a temperature transmitter for fi eld mounting with a multifunctional LCD display. It accepts TC, RTD, Ohm and mV sensors, generating a 4 – 20 mA current signal (HART® 7 model) or a digital signal (Profi bus-PA model), according to the measurement type and user confi guration.

VTT10-H is a temperature transmitter for head mounting - DIN Form B-compliant that generates 4 – 20 mA current signal (HART® 7 model) or a digital signal (Profi bus-PA model), according to the measurement and user confi guration.

VTT10-P: PANEL MOUNTING

VTT10-P is a temperature transmitter for DIN rail mounting, that accepts TC, RTD, Ohm and mV sensors, generating 4-20 mA current signal (HART® 7 model) or a digital signal (Profi bus-PA model), according to the measurement type and user confi guration. The HART®/4-20 mA model has two open-collector outputs for alarms or on/off signals.



TM

Process Instruments

VTT01

VTT10-M

LOW COST HEAD MOUNT TEMPERATURE TRANSMITTER

MULTIPOINT TRANSMITTER

VTT01-H is a low cost 4-20 mA temperature transmitters, designed for installation in DIN head form B.

It works with several types of sensors, such as: thermocouples and RTDs, plus resistance and voltage signals.

VTT10-M is a multipoint transmitter for measuring up to eight sensors in the Profi bus PA model and up to six sensors in the HART® 7 model.

Main Features:

• Single network address (HART® or Profi bus PA)• Reduction of installation and project costs due to the availability of independente temperature

channels• Low power consumption (12 mA for Profi bus PA and 3.8 mA for HART®)• Various types of measurements and sensors (TC, RTD, mV and Ohm)• Up to 8 sensor inputs for Profi bus PA or 6 sensor inputs for HART®

• Independent analogue outputs• Self-diagnosis• 5 Digit LCD, Rotatable, Multifunctional and Easy to Use• Intuitive, confi gurable, and fast editing local adjust



TM

Process Instruments

VIO10PROFIBUS-PA REMOTE I/O

VIO10 is a remote I/O with Profi bus-PA communication, designed for fi eld or panel (with DIN rail) installation.

It has great versatility with temperature inputs, 4-20 mA inputs and outputs, digital inputs and outputs on a single hardware.

Main benefi ts:

• A single node in the Profi bus-PA network with consumption of 12mA• Reduced installation and design cost through the availability of 16 digital inputs, 8 digital outputs, 3

temperature channels and analog input and output signal converters• Easily enables the integration of output devices (e.g. valve positioners) and HART® / 4-20 mA input

(transmitters) in Profi bus-PA networks• Easy confi guration of inputs and outputs• Several measurement and sensor types (TC, RTD, mV and Ohm)• Self-diagnosis• 5 Digit LCD, Rotatable, Multifunctional and Easy to Use• Local adjustment intuitive, confi gurable and with fast editing function



TM

Process Instruments

VCI10COMMUNICATION INTERFACE

Vivace Process Instruments has a wide range of hardware and software interfaces for HART® and Profi bus-PA protocols, making comissioning, startup, operation and maintenance steps easier. The interfaces are available for Windows® and Android® platforms, also working with EDDL and FDT/DTM-based tools with USB, Android® and Bluetooth® connectivity.

VCI10-BH VCI10-BP VCI10-UH

VCI10-UP VCI10-AH

VCI10-BH is a HART® communication interface for use with Bluetooth® devices.

The VCI10-BP is a Profi bus-PA communication interface for use with Bluetooth® devices.

VCI10-UH is a HART® communication interface for devices with USB type-A standard connection.

The VCI10-UP is a Profi bus-PA communication interface for devices with USB type-A standard connection.

The VCI10-AH is a HART® communication interface for use with Android® devices.



TM

Process Instruments

CONVERTERSVAP10: ANALOG TO PROFIBUS-PA CONVERTER

VPO10: PROFIBUS-PA TO OUTPUT CONVERTER

VHC10: HART® TO 4-20 MA FIELD CONVERTER

VAP10 is an analog converter that allows up to 3 input channels for 4-20 mA (or 0-20 mA) or 0-5 V signals to be converted to Profi bus-PA. User can confi gure each channel to work with current or voltage, which ensures great versatility on VAP10 applications.

VPO10 is a three-channel output converter, where the user can choose the actuation in current (4-20 mA) or discrete output with open collector (maximum current 400mA, 24 Vdc), which guarantees great application versatility.

VHC10-F was projected to create an additional 4-20 mA output current channel, off ering another analog monitoring to devices that do not own this feature (valve positioners, for instance) or that need an additional variable monitoring on its process.



TM

Process Instruments

VFC10 VBP10 VRP10-O

VRI10: REMOTE INDICATOR

VCF10 is a power conditioner with active impedance control circuit for Profi bus PA and Foundation fi eldbus ™ protocols according to IEC 61158-2.

VBP10 guarantees short-circuit protection on spurs for Profi bus and Foundation Fieldbus™ networks, avoiding short-circuit propagation among spurs or trunk.

The VRP10-O allows that PROFIBUS-PA (H1, 31.25 kbits/s) electrical interfaces are converted into optical interfaces and vice versa.

VRI10 is a remote indicator for Profi bus-PA (up to 10 indications) or 4-20 mA (up to 2 channels) networks. The 4-20 mA version is also a totalizer.

Main benefi ts:

• Powered by the current loop with low consumption (VRI10-I)• 1 or 2 channels (VRI10-I) or 10 indications (VRI10-P)• Copy function from one channel to another (VRI10-I)• Confi guration via local settings• Open loop self-diagnostics (VRI10-I)• Non-volatile totalization (VRI10-I)• Extraction of the square root (VRI10-I)• No cyclic communication (VRI10-P)• Units of pressure, temperature, fl ow, level, density and user unit• 5-digit, easy-to-use, multi-function rotary LCD with bar graph

VRI10 is a remote indicator for Profi bus-PA (up to 10 indications) or 4-20 mA (up to 2 channels) networks. The 4-20 mA version is also a totalizer.

Main benefi ts:

• • •

ACCESSORIES



TM

Process Instruments

SERVICESVivace, in addition to its complete line of products for industrial automation, has a multidisciplinary technical team and can assist its clients in several areas. Protect your investments through a partnership with our teams to help you at each stage of life cycle of your plant, assessing high-level implementations of instrumentation and control. Vivace is proud to have a team with more than 25 years of experience and highly skilled and can help you with success in:

• Repairs for fi eld equipment• Field service• Commissioning, startup and assisted operation• Maintenance plans• Consulting in automation projects• Certifi cations of digital networks• Field device Specifi cations• Trainings• Electronic and Mechanical Development

Vivace has a team of professionals with extensive experience in project area and is able to assist in choosing the best alternatives and products. Vivace has its services based on technical analysis, detailed knowledge and expertise. Combining knowledge and instrumentation segment experience and control with the best practices, our teams will help with actions that will have positive and continuous commercial impacts, ensuring consistent and measurable results continuously. In addition, Vivace has a wide range of products to improve the operating performance of your instrumentation.

TRAININGVivace Process Instruments off ers several training and courses for industrial automation professionals, through specialists in communication protocols, measurement of analog process variables, networks certifi cation and off ers training in:

• 4-20mA / HART®

• WirelessHART• Profi bus-DP and Profi bus-PA• Foundation fi eldbus• Pressure, fl ow, level, density, temperature measurements• Valve Positioners• Profi bus network certifi cation• etc.

According to the clients’ needs, special and in-company courses are held.



TM

Process Instruments

Street: Dr. Julio Xavier, 108 - Jardim Bela VistaCity: Cravinhos, State: São Paulo, ZIP CODE: 14.140-000

Phone: +55 16 3482-1238 / 16 3482-1344

TM

Process Instruments


Documents

E instruments €¦ · experienced professionals working on automation and instrumentation market, having large experience on project techniques, maintenance and installation, in