LARGE CAPACITY PLATE AND STRUCTURAL FABRICATING FACILITYINCLUDING (7) MANIPULATORS, (6) TANK TURNING ROLLS AND (55) WELDERS TO 2008,

PLATE ROLLS, ANGLE ROLL, BRAKE, SHEAR AND SUPPORT EQUIPMENT

LARGE CAPACITY PLATE AND STRUCTURAL FABRICATING FACILITYINCLUDING (7) MANIPULATORS, (6) TANK TURNING ROLLS AND (55) WELDERS TO 2008,

PLATE ROLLS, ANGLE ROLL, BRAKE, SHEAR AND SUPPORT EQUIPMENT See Instructions on Page 4

To Become a Qualified Bidder on the Internet

The Former Property of

SUPERIOR FABRICATORSSUPERIOR FABRICATORS155 Gordy Street - Baldwin, Louisiana 70514

50 Miles Southeast of Lafayette, Louisiana

SALE DATE: THURSDAY, NOV. 14TH, STARTING AT 9:00 AMSALE DATE: THURSDAY, NOV. 14TH, STARTING AT 9:00 AMINSPECTION: WEDNESDAY, NOV. 13TH FROM 10:00 AM TO 4:00 PM

(5) Romar RM3025 Track Mount Welding Manipulators (To 2007)

1-7/8” X 10’ Webb Model 24L Mechanical Plate Bending Roll(2) Galion FA-150 Cranes

(5) Sets 45 Ton Romar Tank Rolls

(50+) Lincoln & Miller Welders (To 2008)

6” X 6” X 7/8” Buffalo Angle Roll

Plant & Machinery, Inc.2901 W. Sam Houston Pwky N., Suite A130Houston, Texas 77043Phone 713-691-4401 Fax 713-672-7905pmi-auction.com | pmi@pmi-auction.com

CINCINNATIINDUSTRIALAUCTIONEERS

auctioneers | appraisers | since 1961

Cincinnati Industrial Auctioneers2020 Dunlap St., Cincinnati, Ohio 45214Phone 513-241-9701 Fax 513-241-6760cia-auction.com | info@cia-auction.com

1340395o CIAPMI Superior Fabricators-6 10/18/13 2:27 PM Page 3

THURSDAY, NOVEMBER 14THTHURSDAY, NOVEMBER 14TH

10’ X 10’ Pandjiris Model 30565-CAR TrackMount Welding Manipulator

(2) Romar Model 3025M-HD-TC-M Track Mount Welding Manipulators

Romar Model RM3025-TCM Track Mount Welding Manipulator

(2) Romar Model 3025M-HD-TC-M Track Mount Welding Manipulators

Close Up View RomarManipulator WeldingEquipment

(2) Romar Model RM3025 Track Mount Manipulator

WELDING MANIPULATORS (2) Romar Model RM3025 TrackMount Manipulator; S/N 6112 (2007)and 5115 (2006), 96” V-Travel, 96” H-Travel, Height 13’3”, 66” Wide X 60’ LongTrack, 1,000 Amp Lincoln Idealarc DC-1000Welding Power Source, Lincoln NA-3N WireFeed Control, Sub-Arc Systems, Email jef-fjr@cia-auction.com for drawing from manu-facturer (New 2006/2007) SEE PHOTO(2) Romar Model 3025M-HD-TC-MTrack Mount Welding Manipulators;S/N 3087-02B and 3087-02C, 96” V-Travel,96” H-Travel, 58” Wide X 65’ Long Track,1,000 Amp Lincoln Idealarc DC-1000Welding Power Source, Lincoln Model NA-38 Solid State Automatic Wire Feeders, Sub-Arc Systems, Email jeffjr@cia-auction.com

for drawing from manufacturer (New 2005)SEE PHOTO

Romar Model RM3025-TCM TrackMount Welding Manipulator; S/N 5164,96” V-Travel, 96” H-Travel, Height 13’3”, 60”Wide X 75’ Long Track, 1,000 Amp LincolnIdealarc DC-1000 Welding Power Source,Lincoln NA-3N Wire Feed Control, Sub-ArcSystem, Email jeffjr@cia-auction.com fordrawing from manufacturer (New 2006)

SEE PHOTO10’ X 10’ Pandjiris Model 30565-CARTrack Mount Welding Manipulator;S/N 800-4980, 58” Wide X 70’ Long Track,1,000 Amp Lincoln DC-1000 WeldingPower Source, Lincoln NA-3A Wire FeedControl, Sub-Arc System SEE PHOTO

NEW2006/2007

NEW2005

NEW2005

NEW2006

TO BE SOLD VIA PHOTOEsab Model MKR-300 3X3 MTR WeldingManipulator; S/N A1000-716, 3 MeterColumn, 3 Meter Boom, ESAB Model LAF1000 DC Power Source, Weld EngineeringMighty-Mac X Heavy-Duty Flux VacuumSystem, A2-A6 Process Controller, RCCPendant, Wire Feeder, Boom Platform,Floor Rails, Located in Cincinnati, Ohioemail jeffjr@cia-auction.com for moreinfo / photos (New 2000)

1340395o CIAPMI Superior Fabricators-6 10/18/13 2:27 PM Page 4

SUPERIOR FABRICATORSSUPERIOR FABRICATORS

8’ X 8’ Pandjiris Model 30565-CARTrack Mount Welding Manipulator;Shop Order # 41-1044, 1,000 AmpLincoln DC-1000 Welding Power Source,Lincoln Model NA-3N Wire FeedControl, Sub-Arc System, 58” Wide X 50’Long Track SEE PHOTO

TANK TURNING ROLLS(5) 45 Ton / 30 Metric Ton RomarModel PR30/45DM Motorized TankTurning Roll Sets w/ Idlers; S/N5994D, 5165D, 4800D, SE13107D andN/A, 45 Metric Ton Turning Capacity, 30 Metric Ton Load Capacity, 6-1/2” Wide X 20” Diameter Rolls,Adjustable From 24” to 84” Width, Email jeffjr@cia-auction.com for drawing from manufacturer (New 2006/2007) SEE PHOTO30 Ton (Est.) Pandjiris Model 1R-60 Motorized Tank Turning RollSets w/ Idlers; S/N 41-1043, 20” X 16”Rolls, Adjustable From 24” to 60” Width 30 Ton (Est.) Pandjiris MotorizedTank Turning Roll Sets w/ Idlers;S/N N/A, Power and Idler Units, 20-1/2”X 7” X 17-3/4” Rolls, Adjustable from 24”to 60” Width

WELDERS(32) 400 Amp Lincoln Idealarc DC-400 Mig Welders with Lincoln LF72and LN7 Wire Feeders; Newer Black

Tag Example Serial NumbersU1940224660 and U1980703669, OlderWhite Tag Example Serial NumbersAC606498 and AC 597797See AuctionCatalog for Exact Serial Numbers (Newto 2000’s) SEE PHOTO(18) 450 Amp Miller Dimension452 Mig Welders with Miller 22Aand 24A Wire Feeders; ExampleSerials Include LJ011109C andLH170192C, See Auction Catalog forExact Serial Numbers (New 2007/2008)

SEE PHOTO(4) 1,200 Amp Lincoln Idealarc AC-1200 Variable Voltage WeldingPower Sources; Example Serial NumbersU1050913236 and U1050522207 (New2005) SEE PHOTO(4) Lincoln Invertec V350-Pro MigWelders

WELD HEATERS(18) PDS Corp. 6-Zone WeldHeatTreat Consoles for Pre-Heat orPost-Heat; Rated at Approx. 75 KVA, AllPurchased from 2006 to 2010 at Approx.Cost of $18,000 each (New to 2010)(5) PDS Corp. 9-Zone Weld HeatTreat Consoles for Pre-Heat orPost-Heat; Rated at Approx. 100 KVA,All Purchased from 2006 to 2010 atApprox. Cost of $18,000 each (New to2010)

Large Quantity Heavy FabricatedSteel Heater Pads

WELDING EQUIPMENTAronson Model RAB 15VS-DACMotorized Welding Positioner; S/N829, 9,000 Lbs. In Rotation and 15,000Lbs. In TiltPhoenix Type 750HT / Model 5 RodOven(2) Henkel Model K450 Rod Ovens(10) Henkel Flux OvensThermal Dynamics Thermal ArcPak44 Plasma CutterThermal Dynamics Thermal ArcPak 10XR Plasma Cutter(8) Bug-O Track Burners(6) Oxy / Acetylene Circular TypeBevellers up to 24” (20) Lincoln Model LN-7 WireFeedersLarge Quantity Welding Suppliesand Equipment Including; HeavyFabricated Saw Horses, Welding Tablesand Fixtures, (80) Boxes of Various SizeWelding Rod by Hobart, ESAB andLincoln, (75) Spools of Various SizeWelding Wire by Auest, Lincoln andESAB, (50) Bags Lincoln No. 860 Flux,Various Size Welding Clamps, Vise GripClamps, Torch Tips, Welder Repair Partsand Related Items

Bank View (22) Weld Heaters and (13) Various RodOvens

(22) PDS Corp 9-Zone and 6-Zone Weld Heaters

(4) 1,200 Amp Lincoln Idealarc AC-1200 VariableVoltage Welding Power Sources

(18) 450 Amp Miller Dimension 452 Mig Welderswith Miller 22A and 24A Wire Feeders

(32) 400 Amp Lincoln Idealarc DC-400 MigWelders with Lincoln LF72 and LN7 WireFeeders

(5) 45 Ton / 30 Metric Ton Romar Model PR30/45DM Motorized Tank Turning Roll Sets w/ Idlers

Large Quantity Welding Supplies, Tools, and Accessories

NEW2006/2007

NEW2007/2008

NEW AS2010

LATEMODEL

NEW2005

NEW TO2000’s

1340395o CIAPMI Superior Fabricators-6 10/18/13 2:27 PM Page 5

THURSDAY, NOVEMBER 14THTHURSDAY, NOVEMBER 14TH

PLATE BENDING ROLLS1-7/8” X 10’ Webb Model 24LMechanical Plate Bending Roll; S/N5151W24, 10’-2” X 1-3/4” Capacity, 24”Dia. Top and Rear Rolls, 75 HP MainDrive and 30 HP Auxiliary Motors, Ratedat 11’ - 19’ Per Minute SEE PHOTO3/4” (Est.) X 10’ Mfg. UnknownMechanical Plate Bending Roll;13” Diameter Top X 12” DiameterBottom Rolls SEE PHOTO1/4” (Est.) X 8’ Kniles and JonesMechanical Plate Bending Rolls

ANGLE BENDING ROLL6” X 6” X 7/8” Buffalo No. 3Horizontal Angle Bending Roll;Drawing No. 8T-21233, Angles Leg Out6” X 6” X 7/8”to Max Diameter 60”,Angles Leg In 5” X 5” X 7/8”to MaxDiameter 66”, Beams on Flanges 12” -30#, Channels Flange Out 12” - 30#,Channels Flange In 10” - 24#, Roundsand Squares 3-1/4” - 3”, Heavy Pipe 4-1/2”, 30 HP Motor, 1,200 RPM, CodeAHSEN SEE PHOTO(3) Sets of Various Style Angle andPipe Tooling

PRESS BRAKE600 Ton X 12’ Pacific HydraulicPress Brake; S/N N/A, 144” OverallBed and Ram, 122” Between Side

Frames, Foot Pedal (Approx. 1962)SEE PHOTO

Heavy Press Brake Punches andDies Including; (1) 144” X 8” 4-WayDie and (1) 120” V-Grove Die and Punch

SQUARING SHEAR3/8” X 10’ Pacific Model 375HDHydraulic Power Squaring Shear;S/N 510232, Foot Pedal Control, ManualBack Gage SEE PHOTO

IRONWORKERBuffalo No. 2-1/2 UnistructualMechanical Iron Worker; S/N63Y0473, 1-5/8” X 1” – 1-7/16” X 7/8”Punch, 6” X 6” X 1/2” – 4” X 4” X 1/2”Angles, 2-1/4” Rounds, 2” Square

SEE PHOTO

COLD SAW24” Trennjager Model PMC8Upacting Mitre Head Cold Saw;S/N GF489, 440 Volt, 19” Under Frame,30” Blade Travel SEE PHOTO

RADIAL ARM DRILLS9’ Arm X 17” Column X 45’ TrackCincinnati Bickford Super ServiceTrack Mounted Radial Arm Drill;S/N 6E-813, 10 - 1,250 RPM, 60” WideX 45’ Rail Track System SEE PHOTO8’ Arm X 15” Column AmericanHole Wizard Radial Arm Drill; 15 –1,200 RPM, 58” X 120” Work Table

Large Quantity of Morse TaperLarge Capacity HS Drills

MISC. MACHINERYMiscellaneous MachineryConsisting of; 12” X 18” Wells Model1118 Horizontal Band Saw, CincinnatiNo. 2 Tool and Cutter Grinder, 2HPOliver Model 600 Drill Point Grinder,Ridgid Model 535 Powered PipeThreader, 10” Jet 1-1/2 HP DE Grinder, 5HP Worthington Air Compressor w/ 100Gal. Tank Mounted on Portable Skid

LIFT TRUCKS6,000 LB Hyster Model S60FT LPGas Cushion Tire Lift Truck; S/NF187V14728G, 89/211” Triple StageMast, Side Shift, Fork Positioner (New2009) SEE PHOTO5,000 LB Hyster Model S50FT LPGas Cushion Tire Lift Truck; S/NF187V14703G, 87/200” Triple StageMast, Side Shift (New 2009)(2) 5,000 LB Hyster Model S50XMLP Gas Cushion Tire Lift Trucks;S/N D187V29005A and D187V29002A,83/189” Triple Stage Mast, Side Shift(New 2003)4,000 LB Hyster Model S40XM LPGas Cushion Tire Lift Truck; S/NC010H06732X, 82/127” Standard Mast(New 2000)

9’ Arm X 17” Column X 45’ Track CincinnatiBickford Super Service Track Mounted RadialArm Drill

3/4” (Est.) X 10’ Mfg. Unknown Mechanical PlateBending Roll

600 Ton X 12’ Pacific Hydraulic Press Brake

3/8” X 10’ Pacific Model 375HD Hydraulic PowerSquaring Shear

24” Trennjager Model PMC8Upacting Mitre Head ColdSaw

6” X 6” X 7/8” Buffalo No. 3 Horizontal Angle Bending Roll Buffalo No. 2-1/2Unistructual MechanicalIron Worker

1-7/8” X 10’ Webb Model 24L Mechanical Plate Bending Roll

WEBCAST BIDDERINSTRUCTIONS

➢ All Internet bidders must Posta Deposit of Approx. 25% ofYour Planned SpendingBudget or $5,000 Minimumwith Cincinnati IndustrialAuctioneers in Order to beapproved to Bid. Those whodo Not Post the Deposit WillNot be Approved. Period.

➢ There is a 18% Buyer’sPremium in Effect for AllOnline Purchases.

➢ We Highly Recommend thatPotential Buyers Attend thisAuction & Bid Live Onsite.This will give you the Abilityto Inspect the Items & FullyAppreciate Their Condition,Along with Saving You 3% ofthe Buyer’s Premium.

No Last Minute Registrationswill be accepted. Make Sure toRegister & Post Your DepositNo Later than 48-Hours Priorto the Start of the Auction.

1340395o CIAPMI Superior Fabricators-6 10/18/13 2:27 PM Page 6

THURSDAY, NOVEMBER 14THTHURSDAY, NOVEMBER 14TH

(2) 664 Ton Simplex Hydraulic Jacks w/ ElectricPump System

2002 Chevrolet Model Z-66 Avalanche 4-Door SUVLarge Quantity Heavy Fabricating Related Shop Tools and Equipment

Large Quantity Lifting Equipment IncludingSpreader Bars, Chanins, Plate Grabbers and Related

5,000 LB Hyster Model S50FT & S50XM LP Gas CushionTire Lift Trucks (New to 2009)

6,000 LB Hyster Model S60FT LP Gas Cushion TireLift Truck (New 2009)

15 Ton Galion Model 150FA Rubber Tire Hydraulic Crane

RUBBER TIRE CRANES15 Ton Galion Model 150FARubber Tire Hydraulic Crane; S/N0200004U009600, Crane Rated at 10’Radius with Max Payload, 3-SectionsPower Boom, Load Ratings From 10’ –36’, Working Radius at 10’ withOutrigger to 30,000 Lb., 36’ Radius at6,200 Lb., Hydraulic Outriggers, MaxHorizontal Reach 37’-6”, 360 DegreesSwing Rotation, Elevation Max 70Degrees, 121 HP, Komatsu 6-CylinderDiesel Engine, 17.5 – 25 Tires, 3,911Hours Showing (Approx. Mid 1980’s)

SEE PHOTO

15 Ton Galion Model 150 RubberTire Hydraulic Crane; S/N N/A, 3-Section Power Boom, Komatsu 6-Cylinder Diesel Engine, Estimated LoadRating is 30,000 Lb. at 10” Radius withOutriggers

TRUCKS, TRACTOR ANDTRAILER2002 Chevrolet Model Z-66Avalanche 4-Door SUV; VIN#3GNEC13T72G225854, Full Power,Vortec V-8 Gas Engine, 159,473 Miles

SEE PHOTO

1986 International Model F9370Oilfield Type Tandem Axle TwinScrew Road Tractor; VIN#2H8FBJUR4GCA13124, EatonTransmission, 2-Speed Rear Axle

Hydraulic Winch, Headache Rack

40’ Long X 8’ Wide Mfg.Unknown Tandem Axle Flat BedTrailer; Diamond Plate Steel BedCovering

Kubota Model L260 Tractor; 2-Wheel Drive, Standard 8-SpeedTransmission, PTO, 3 Part Hitch, with60” Wide Bush Hog Attachment

JACK SYSTEM AND LIFTING EQUIPMENT (2) 664 Ton Simplex HydraulicJacks w/ Electric Pump System;16” Diameter X 26” Tall, with PowerTeam Electric Power Pack

SEE PHOTO

Large Quantity Lifting Equipmentto Support a Heavy FabricationOperation Consisting of; 53” WideX 16’ Long Heavy Steel Transfer Cart,25 Ton and (2) 7 Ton I-Beam TypeCrane Spreader Bars, 48” Crane TypePallet Forks, Sheet Lifting Clamps up to10 Ton, Shackles, (10) EnerpacHydraulic Pumps, (10) VariousCapacities Jacks, 25 Ton Bottle Jack,Chain Falls, Hooks and Other RelatedItems

SHOP AND SUPPORTEQUIPMENTLarge Quantity of ShopEquipment Including; (4) Mag Base

Drills, Ridgid and Porter Cable PortaBand Saws, Abrasive Chop Saw, (60)Dewalt Electric Angle Grinders,Oversize Wrenches and Sockets,Electric Die Grinders, Assorted HandTools, Pneumatic Tools, Shop Fans,Benches with Vises, Steel Shelving andCabinets, 60” Steel Horses and ManyOther Related Items

Large Maintenance Crib withElectrical, Plumbing, Hydraulicsand Mechanical Repair Parts,Hardware and Other Items

STEEL INVENTORY (10) Sheets of Stainless SteelPlate Including; (2) 96” X 16’ X 3/8”,(2) 60” X 20’ X 3/8” and (8) OtherVarious Sizes

(10) Sheets of Carbon Steel PlatesIncluding; (10) 65” X 20’ X 1-1/4”,(1) 12” X 20’ X 3/8”, (1) 8” X 20’ X3/8”, and (7) Other Various Sizes

Rounded Alloy Steel Barge / RigSupport Leg Pieces Large Quantity Heavy Steel FloorPlate to 3/4” ThickBar Stock Including Flat, Pipe,AngleVarious Cut-Off’s and Scrap Steel

Large Quantity Steel Floor Plate and Steel Scrap

NEW AS2009

NEW2009

1340395o CIAPMI Superior Fabricators-6 10/18/13 2:27 PM Page 1

All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All sales are subjectto state and/or local taxes unless a signedexemption form is presented at the time of pur-chase. All balances are due at the conclusionof the sale. No merchandise may be removedwhile the sale is in progress. All bidders mustcomply with our Standard Terms of Sale,copies of which will be available at the sale siteor can be obtained from our website.

15% ONSITE BUYER’S PREMIUM 18% ONLINE BUYER’S PREMIUM

TERMS OF SALE

AUCTIONEERS

From US 90 Approximately 50 Miles Southeast of Lafayette and100 Miles Southwest of New Orleans Exit on St. 3211 andProceed North Towards Franklin Approximately 2 Miles to Route182. Go West on Route 182 Approximately 2 Miles TowardBaldwin. After Crossing Bridge at Baldwin City Limits, Proceed1/2 Mile and Make a Sharp Right. Turn on Sager Brown Road.Proceed East on Sager Brown Approximately 1/4 Mile to GordyStreet. Go Right onto Gordy Street and Proceed to Sale Site onLeft. Watch For Auction Signs.

DIRECTIONS

THURSDAY, NOVEMBER 14THTHURSDAY, NOVEMBER 14TH

SALE DATE:Thursday, November 14th

STARTING AT 9:00AMINSPECTION:

Wednesday, November 13thfrom 10:00 AM to 4:00 PM

FIRST CLASS MAIL! PRE-SORTFIRST CLASS

U.S. POSTAGEPAID

CINCINNATI, OHIOPERMIT NO. 3593

Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞

LARGE CAPACITY PLATE AND STRUCTURAL FABRICATINGFACILITY INCLUDING (7) MANIPULATORS, (6) TANK TURNING

ROLLS AND (55) WELDERS TO 2008, PLATE ROLLS, ANGLEROLL, BRAKE, SHEAR AND SUPPORT EQUIPMENT

Although information has been obtained from sourcesdeemed reliable, the auctioneer makes no warranty orguarantee, expressed or implied, as to the accuracy ofthe information herein contained. It is for this reasonthat buyers should avail themselves of the opportuni-ty to make inspection prior to the sale. This brochureis intended to provide general information of the equip-ment being offered and is subject to errors, omissions,additions or deletions. Please check with the Auctioneer’sOffice for a final listing. Items offered may or may notnecessarily be sold as described and/or photographed inthis brochure.

MAIL BIDS ACCEPTED WITH A 25% DEPOSIT

IMPORTANT NOTICE:

155 Gordy Street - Baldwin, Louisiana 7051450 Miles Southeast of Lafayette, Louisiana

50+ Welders (To 2008)50+ Welders (To 2008)50+ Welders (To 2008)(5) Romar Manipulators (To 2008)(5) Romar Manipulators (To 2008)(5) Romar Manipulators (To 2008)

Plate Rolls To 1-7/8”Plate Rolls To 1-7/8”Plate Rolls To 1-7/8”

SUPERIORFABRICATORS

SUPERIORFABRICATORS

155 Gordy StreetBaldwin, Louisiana 70514

50 Miles Southeast of Lafayette, Louisiana

The Former Property of

Jeffrey Luggen – License No. 1284Ron Moore – License No. 851

Bob Braman – License No. 1099

Cincinnati IndustrialAuctioneers Inc.2020 DUNLAP ST., CINCINNATI, OHIO 45214PHONE (513) 241-9701 / FAX (513) 241-6760WEBSITE: cia-auction.com

The Former Property of

SUPERIORFABRICATORS

SUPERIORFABRICATORS

Plant & Machinery, Inc.2901 W. Sam Houston Pwky N., Suite A130 Houston, Texas 77043Phone 713-691-4401 Fax 713-672-7905pmi-auction.com | pmi@pmi-auction.com

CINCINNATIINDUSTRIALAUCTIONEERS

auctioneers | appraisers | since 1961

Cincinnati Industrial Auctioneers2020 Dunlap St., Cincinnati, Ohio 45214Phone 513-241-9701 Fax 513-241-6760cia-auction.com | info@cia-auction.com

1340395o CIAPMI Superior Fabricators-6 10/18/13 2:27 PM Page 2