Embed Size (px)
Citation preview
DZ-1008Relay
White wire
DZ-1008Relay
White wire
DZ-2500 notes:- White and gray wires used only when needed. May not be used on #4 and #5 switches.- White and gray wires may be reversed depending on mainline travel through switch.- Green and yellow wires used on all mainline switches and switches where derailment is a concern.- Yard and industry switches within easy reach will be manual only.
From DZ-2001Data Driver/Z-1000
From DZ-2001Data Driver/Z-1000
DZ-1008Relay
From DZ-2001Data Driver/Z-1000
MASTERSWITCH
#4 SWITCH#2 SWITCH
#3 SWITCH
Advanced RossReady #4 Double Crossover
From DZ-2001Data Driver/Z-1000
Wire “A” to “A” and “B” to “B”. Connect the outside rails together label “G” (already done if RossReady). Connect the middle diamond “Z” to center rail power.
DZ-1008Relay
From DZ-2001
Data D
river/Z-1000
MASTERSWITCH
#4 SWITCH
#2 SWITCH
#3 SWITCH
Advanced RossReady #4 Double Crossover
White wire
From
DZ-
2001
Dat
a D
river
/Z-1
000
DZ-1008 Relay
Insulating Pin for spur track
LegacyCmd Base
CMDBase
SerialComm
MANCOSignal Booster
Comp/TIU
AccDZ-2001
Data Driver
Z-100014 VAC
To DZ-2500Switch Machines
Data
COMM
Blue
/Whi
te
To TIU, ASC, etc.
White wire
To TIU, ASC, etc.
LegacyCmd Base
DZ-2001Data Driver
CMD Base Cable6-14191
Z-100014 VAC
Data
COMM
Blue
/Whi
te
LCS DB96-81499
LCS WiFiModule6-81325
LCS SER2Module6-81326
LCS PDI1 ft cable6-81500
To DZ-2500Switch Machines
To TIU, ASC, etc.To TIU, ASC,
etc.
