Dynapac Large Tracked Paver

DYNAPAC LARGE TRACKED PAVER

Dynapac F3030C

THE DYNAPAC F3030C is a multi-functional combing decades of experience and new innovations. It offers large paving capacity with lowest cost per ton. The Dynapac F3030C can meet different applications and paving conditions from soil laying appli-cations for road base to asphalt mixes for different road asphalt layers. The superior screed system and the excellent ergonomic design contribute to highest mat quality.

EXCELLENT PAVING QUALITY


2

Alpha TracksMore ground contact for better

traction & improved life.

Low noiseReduced noise level through a

new drive concept and noise

insulation.

Material transferUnmatched capacity for reduced

segregation & improved paving

quality.

ErgonomicsExcellent view to the hopper and

all working areas due to the great

visibility.

EXCELLENT PAVING QUALITY

F3030C

Eng. power at 2,200 min-1 142 kW

Theor. paving capacity 900 t / h

Max. working width 10.00 m

3

Control Intellegent control of the paving

process for better quality.

Dynapac ScreedBest in business with leveling

functions for excellent quality. The

Flexilever offers fast and convenient

change of screed angle for different

layer thickness.

Strong AugerSlim auger drive with adjust-

able height up to 250 mm. Atlas

Copco offers auger diameters

from 380-430 mm.

Central lubrication systemEasily facilitated tractor lubrication

suits convenient serviceability.

Intergated working lightsAtlas Copco offers 2 front/2 rear

working lights for better night work.

Traction

Our Alpha-Track system is long and wide to give you a smooth driv-ing behavior and a perfect grip. The rubber track pads are 320mm wide which creates great ground contact. A high number of rollers inside the tracks improves the maneuverability on curves. The tracks are also very low to give an optimal dumping height. These track pads are especially designed for paving application and have thicker rubber thickness for longer life and lower cost.

Material flow Dynapac has designed the optimal hopper that features chamfered hopper edges to avoid cold asphalt in the corners. A very low dumping height makes collision with trucks almost impossible.The generous hopper with the widest

conveyor tunnel on the market. The tunnel is shaped to create the best flow and not to create any segregation of the material. The twin conveyor system,with reversible drive, offers smooth material flow without segregation.

The auger compartment is fully visible from the operator’s position. The auger and auger tunnel are easily extended to fit wider working widths.

Powerful Auger systemThe Dynapac auger drive system is an improved centrally driven system with a slim gearbox and small outer bearings that allow homogeneity of mixture, despite the high material throughput of up to 900 tons per hour.The left and right auger drives have

SMOOTH WORK FLOW

independent controls. This strong auger system has a torque to handle auger di-ameters from 380 mm up to 430 mm. In order to achieve optimized material flow for different paving thicknesses you can adjust the auger height hydraulically up to 250mm – while paving!

4


Excellent visibility Atlas Copco has developed a new platform for the Dynapac F3030C paver to suit all needs from the operator’s perspective. The platform swings out up to 30 degrees on both sides.

MEETING YOUR NEEDS

Operator’s ComfortThe operator’s comfort is our priority. We focus on providing an ergonomic high end work place. The platform offers generous head room and a flat floor. The ergonomic seats, can be adjusted to any position you need. Placing the dashboard has become even easier due to the versatile dashboard console.

The operator must have a full overview of the complete work-ing situation at all times. This means a view into the hopper, conveyor, auger compart-ment as well as as eye contact with screed operators and truck drivers.

Maintenance without obstaclesWe have cleared the way to provide youwith an easy overview of maintenance. Hydraulic components are directly accessible and easy to find. A simple visual inspection of filters and engine parts allows you to quickly get started. It is a convenient combination you’ll profit from every day.

Rapid access throughoutThe goal is to save you time and money through easy access. Therefore we’ve made the service points central and attainable. The fuse box is easy to access from the tractor side allowing rapid replacement.

5

Screed: Dynapac R300DTThe Dynapac R300DT is a double tamper vibration rigid screed with a basic width of 3m that can be extended with mechan-ical extension boxes up to a maximum width of 10 m. The double tamper system ensure highly compacted mat. This screed is designed to offer a smooth surface finish due to its rigid construction.

6


Ergonomic work placeIn addition to effective compaction the Dynapac screed offers great accessibil-ity. The low height gives you a superior view into the auger compartment and constant control over material flow. This low profile screed provides a cen-tral, safe and ergonomic workplace.

Ergonomic side shield controlThe height of the side shield is adjustable with one crank. The crank is placed on top of the side shield below the remote control, creating an ergonomic and central work-place for the screed operator.

Eccentric flexi leverDynapac´s unique Flexi Lever fast and con-veniently changes the angle of attack. This offers a visual control of screed settings to adopt various layer thicknesses during the paving process. The adjustment is made with a simple grip.

Assembly of exten-sion boxes can be done quickly due to only 4 connection bolts for each box.

RIGID SCREEDS

R300DT

Basic width 3.00 m

Maximum working width (with extension parts) 10.00 m

Heating system LPG

7

Technical Data

Weight, t 25

Basic width, m 2.55

Working width, max 10

Placement thickness (max) -100 to +350

Capacity, t/h 900

Dumping height center (w. hopper flap), mm 525 (540)

Hopper width, internal, mm 3630

Paving speed, m/min 1 - 20”

Transport speed, km/h 0 - 3”

Operator console Slidable left/right

Engine model Cummins QSB6.7-C190

Rated power KW @ 2200 rpm 142 (193)HP

Emissions according to Stage IIIA (T3)

Electrical system, V 24

Fuel tank capacity, l 350

Crawler length, mm 3250

Crawler width, mm 320

Conveyor type Dual bar feeder

Conveyor width, mm 2 x 600

Auger diameter, mm 380/430

PMI 3

49

2 0

241

01

F3030C

Intelligent DashboardOur new drive concept gives you the choice of Stepless drive. The dash board has a PLC control which features intuitive con-trols. The control system provides the operator Ergonomically op-timized Everything has its place. The dashboard is optimally ar-ranged according to function- groups and operational frequency.The casing is, of course, absolutely flawless – shock and water don´t stand a chance. And it looks great!

EcoModeAccording to the jobsite you can adjust the engine rpm to the particular situation.This function gives you lower fuel consump-tion, less noise and a longer life for your engine.

COMMITTED TO SUSTAINABLE PRODUCTIVITY

We stand by our responsibilities towards our customers, towards the environment and the people around us. We make performance stand the test of time. This is what we call - Sustainable Productivity.

www.atlascopco.com

We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, is not guaranteed and contains no warranties of any kind.

Documents

Dynapac Large Tracked Paver