2
DXG Antenna Array Series is the ultimate tool for mapping and detection of shallow and deep subsurface objects. Its three- dimensional, high-accuracy, high-resolution and high-definition subsurface data is quickly collected and analyzed. DXG is the most wideband antenna array on the market with a frequency range between 200 MHz - 3 GHz, maximizing the resolution at each depth level. The unique wideband antenna design consists of bow-tie monopole antennas. The combination of different transmitter/receiver antenna elements allow the user to collect high density three-dimensional data along multiple parallel survey lines, with a channel spacing of 7.5 cm. The antenna is equipped with a standard 5/8” thread mount for easy mounting of a global positioning system (GPS) antenna or TotalStation prism. APPLICATION AREAS Road Pavement Aircraft Runway Bridge Deck Railroad Ballast Utility Mapping Archaeology FEATURES & BENEFITS Unique combination of high-resolution near-surface imaging and deep penetration capabilities. Locates structures and utilities at deeper depths without sacrificing resolution. Three standard models offer a variety of widths and coverage options. Captures wide swaths of survey data in one pass. Quickly track pipes, utilities, rebar and other structures. Wider antenna arrays ideally suited for large scale utility mapping and fieldwork. Narrower arrays enable survey in narrow corridors and small areas. Simultaneous data recording from two receiver antennas for faster rate with no loss of fidelity. Lane closures shortened, safer working environment and less time spent in the field. Support for multi-offset data recording. Built-in GPS receiver for coarse positioning and precise time reference standard. Delivered and stored in rugged shipping container for safe storage and transportation. DXG collected bridge deck data displayed in Examiner™. Note both the interface layers between the asphalt overlay, concrete are clearly visible, along with individual rebars. 3D-RADAR DXG ANTENNA ARRAY SERIES DXG Antenna Array Series GROUND-COUPLED ANTENNA ARRAYS FOR 3D STEP-FREQUENCY GPR WWW.3D-RADAR.COM

DXG Antenna Array Series - 3D-Radar3d-radar.com/wp-content/uploads/2018/05/DXG-Antenna... · 2018. 5. 30. · DXG Antenna Array Series is the ultimate tool for mapping and detection

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: DXG Antenna Array Series - 3D-Radar3d-radar.com/wp-content/uploads/2018/05/DXG-Antenna... · 2018. 5. 30. · DXG Antenna Array Series is the ultimate tool for mapping and detection

DXG Antenna Array Series is the ultimate tool for mapping and detection of shallow and deep subsurface objects. Its three-dimensional, high-accuracy, high-resolution and high-definition subsurface data is quickly collected and analyzed. DXG is the most wideband antenna array on the market with a frequency range between 200 MHz - 3 GHz, maximizing the resolution at each depth level.

The unique wideband antenna design consists of bow-tie monopole antennas. The combination of different transmitter/receiver antenna elements allow the user to collect high density three-dimensional data along multiple parallel survey lines, with a channel spacing of 7.5 cm. The antenna is equipped with a standard 5/8” thread mount for easy mounting of a global positioning system (GPS) antenna or TotalStation prism.

APPLICATION AREAS › Road Pavement

› Aircraft Runway

› Bridge Deck

› Railroad Ballast

› Utility Mapping

› Archaeology

FEATURES & BENEFITS › Unique combination of high-resolution near-surface imaging and deep penetration capabilities.

› Locates structures and utilities at deeper depths without sacrificing resolution.

› Three standard models offer a variety of widths and coverage options.

› Captures wide swaths of survey data in one pass.

› Quickly track pipes, utilities, rebar and other structures.

› Wider antenna arrays ideally suited for large scale utility mapping and fieldwork.

› Narrower arrays enable survey in narrow corridors and small areas.

› Simultaneous data recording from two receiver antennas for faster rate with no loss of fidelity.

› Lane closures shortened, safer working environment and less time spent in the field.

› Support for multi-offset data recording.

› Built-in GPS receiver for coarse positioning and precise time reference standard.

› Delivered and stored in rugged shipping container for safe storage and transportation.

DXG collected bridge deck data displayed in Examiner™. Note both the interface layers between the asphalt overlay, concrete are clearly visible, along with individual rebars.

3D-RADAR DXG ANTENNA ARRAY SERIES

DXG Antenna Array SeriesGROUND-COUPLED ANTENNA ARRAYS FOR 3D STEP-FREQUENCY GPR

WWW.3D-RADAR.COM

Page 2: DXG Antenna Array Series - 3D-Radar3d-radar.com/wp-content/uploads/2018/05/DXG-Antenna... · 2018. 5. 30. · DXG Antenna Array Series is the ultimate tool for mapping and detection

3D-RADAR DXG ANTENNA ARRAY SERIES WWW.3D-RADAR.COM

DXG Antenna Arrays Series is a trademark of 3D-RADAR, AS, a subsidiary of Chemring North America’s Sensors and Electronic Systems’ Division. This product is subject to the United States (U.S.) Export Administration Regulations (EAR), Parts 730-774). The safe, transfer, transportation or shipment of this product to foreign person, inside or outside of the U.S., is prohibited or restricted without proper authorization or license.

© Copyright 2015. 3D-RADAR AS. All rights reserved. 01/15/2015

3D-RADARKlæbuveien 196 B7037 TrondheimNorway

Brynsveien 130667 OsloNorway

Tel: +47 7289 [email protected]

3D-RADAR23031 Ladbrook DriveSterling, VirginiaUSA

Tel: +1 (703) [email protected]

TECHNICAL SPECIFICATIONS

Width

Frequency Range

Number Of Channels

Channel Spacing (Cross-Line)

Effective Scan Width

Direct Wave Suppression

Polarization

Size (LxWxH m)

Weight

Transport Container Size

Transport Container Weight

DXG0908

0.9 m

200-3000 MHz

8

75 mm

0.6 m

> 50 dB

Linear(in-line direction)

0.945 x 0.795 x 0.14

19 kg

1.0 x 0.92 x 0.205

20 kg

DXG1212

1.2 m

200-3000 MHz

12

75 mm

0.9 m

> 50 dB

Linear(in-line direction)

1.245 x 0.795 x 0.14

25 kg

1.295 x 0.92 x 0.205

22 kg

DXG1820

1.8 m

200-3000 MHz

20

75 mm

1.5 m

> 50 dB

Linear(in-line direction)

1.845 x 0.795 x 0.14

38 kg

1.895 x 0.92 x 0.205

32 kg

The combination of GeoScope™ Mk IV 3D GPRradar unit and DXG ground-coupled antenna array maximizes both vertical and horizontal resolution at different depths: it makes it possible to resolve closely spaced rebars as well as imaging utilities buried deeper into the ground.

Transmitting and receiving elements of the DXG1820. Other models have identical element spacing but with different number of channels depending on the antenna width.

Note: Specifications subject to change. Other sizes are available on a custom order basis. Contact 3D-RADAR for additional details.

SPECIFICATIONS

ACCESSORIES › Two-wheel, light-weight trailer

› Antenna cables (up to 10 m length)

› DMI/Odometer with wheel adapter

3D-RADAR RELATED PRODUCTS › DX Antenna Array Series

› GeoScope™ Mk IV 3D GPR

› Examiner™ Software